ProLights ECLPARFC Manuale utente

EN - IT

USER MANUAL

MANUALE UTENTE

ECLPARFC

LED PROJECTOR

reproduced in any form or by any means for any commercial use.

In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the

characteristics stated in this instruction manual at any time and without prior notice.

All revisions and updates are available in the ‘manuals’ section on site www.musiclights.it

REV. 02-07/19

1

ECLPARFC

Packing content

• ECLPARFC

• User manual

• Power cable

• Additional optics: 24° (included), 65° lens (included)

• Gel frame holder included

TABLE OF

CONTENTS

Safety

General instructionsGeneral instructions

Warnings and installation precautionsWarnings and installation precautions

1 Introduction

1. 1 Description and specications1. 1 Description and specications

1. 2 Operating elements and connections1. 2 Operating elements and connections

2 Installation

2. 1 Mounting2. 1 Mounting

3 Functions and settings

3. 1 Operation3. 1 Operation

3. 2 Basic3. 2 Basic

3. 3 Menu structure3. 3 Menu structure

3. 4 DMX mode3. 4 DMX mode

3. 5 DMX conguration3. 5 DMX conguration

3. 6 Channels DMX3. 6 Channels DMX

3. 7 Screen3. 7 Screen

3.8 Fixture settings3.8 Fixture settings

Dimmer Dimmer

Led frequency Led frequency

Fan mode Fan mode

Factory Reload Factory Reload

3. 9 Fixture Information3. 9 Fixture Information

3. 10 Operations in automatic mode3. 10 Operations in automatic mode

Master/Slave Master/Slave

Eects Eects

Static Mode Static Mode

4 Maintenance

4. 1 Maintenance and cleaning the unit4. 1 Maintenance and cleaning the unit

4. 2 Trouble shooting4. 2 Trouble shooting

2

3

5

6

7

8

10

11

16

17

18

2

ECPARFC

SAFETY

General instruction

• The products referred to in this manual conform to the European Community Directives and are there-

fore marked with .

• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.

Never make any modications on the unit not described in this instruction manual, otherwise you will

risk an electric shock.

• Connection must be made to a power supply system tted with ecient earthing (Class I appliance ac-

cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units

from indirect contact and/or shorting to earth by using appropriately sized residual current devices.

• The connection to the main network of electric distribution must be carried out by a qualied electrical

installer. Check that the main frequency and voltage correspond to those for which the unit is designed

as given on the electrical data label.

• This unit is not for home use, only professional applications.

• Never use the xture under the following conditions:

- in places wet;

- in places subject to vibrations or bumps;

- in places with a temperature of over 45 °C.

• Make certain that no inammable liquids, water or metal objects enter the xture.

• Do not dismantle or modify the xture.

• All work must always be carried out by qualied technical personnel. Contact the nearest sales point for

an inspection or contact the manufacturer directly.

• If the unit is to be put out of operation denitively, take it to a local recycling

plant for a disposal which is not harmful to the environment.

Warnings and installation precautions

• If this device will be operated in any way dierent to the one described in this manual, it may suer

damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like

short circuit, burns, electric shock, etc.

• Before starting any maintenance work or cleaning the projector, cut o power from the main supply.

• Always additionally secure the projector with the safety rope. When carrying out any work, always com-

ply scrupulously with all the regulations (particularly regarding safety) currently in force in the country

in which the xture’s being used.

• Install the xture in a well ventilated place.

• Keep any inammable material at a safe distance from the xture.

• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent

that their eectiveness is impaired.

• The lamp (LED) shall be changed if it has become damaged or thermally deformed.

• Never look directly at the light beam. Please note that fast changes in lighting, e. g. ashing light, may

trigger epileptic seizures in photosensitive persons or persons with epilepsy.

• Do not touch the product’s housing when operating because it may be very hot.

• This product was designed and built strictly for the use indicated in this documentation. Any other use,

not expressly indicated here, could compromise the good condition/operation of the product and/or

be a source of danger.

• We decline any liability deriving from improper use of the product.

WARNING! Before carrying out any operations with the unit, carefully read this instruction

manual and keep it with cure for future reference. It contains important information about

the installation, usage and maintenance of the unit.

3

ECLPARFC

- 1 - INTRODUCTION

1.1 ECLPARFC - DESCRIPTION AND TECHNICAL SPECIFICATIONS

EclipsePAR is a range of multipurpose LED xtures with a single source, delivering silent operation, high

quality of light and optical exibility, designed to redene the standard for theatrical, TVs and corporate

applications.

EclipsePARFC features a 150W RGB + warm white and delivers a superior white CTC with +/- tint control,

Red-shift (CRI>92 and R9>94) and colour mixing.

The xture includes an extensive range of accessories including barn doors, lter frame, egg crate and a

multitude of interchangeable lenses.

EclipsePAR features a smooth 16-bit dimming as well as RDM control and adjustable PWM providing eye-

candy.

LIGHT SOURCE

• Source: 150W RGB + warm white

• CT: 2800K - 10000K

• CRI: > 92

• R9: > 94

• Luminous ux: (40°) 5720 lm - (65°) 5130.8lm @Full

• Lux: (40°) 2890 lux - (65°) 490lux @3m full

• Lux: (40°) 1040.4 lux - (65°) 176.4lux @5m full

• Source life expectancy: >50.000 h

• Other: TM-30-15RF/RG: 90/99 - TLCI: >85

OPTICS

• Beam angle: (on board) 24° or (included) 65°

• Field angle: (on board) 41° or (included) 100°

• Lens diameter: 163mm

• Lens type: fresnel lens

• Additional optics: 24° lens on board - 65° lens included- 40° lens optional - egg crate optional - barn-

doors optional - gel frame holder included

• Other: 12° lens not available

COLOUR SYSTEM

• Colour mixing: RGB+Warm White

• CTC: CTC control through independent DMX channel, plus/minus green and magenta correction and

amber shift activation by DMX

• White presets: 2800K-6500K

• Colour wheel: virtual colour wheel with presets

• Macros: built-in white presets

DYNAMIC EFFECTS

• Static colour mode: selection of static colour

• Manual colour mode: manual adjustment of colour

• Auto mode: built-in programs with execution speed adjustment

• Special features: linear crossfade from a white to any color and CTO applied on colors

BODY

• Hardware on-board: on board mechanics for rigging to the ceiling

• Body: sturdy die-cast aluminium body conceived for long-time durability

• Body colour: black

4

ECPARFC

Fig.1 Technical drawing

CONTROL

• Protocols: DMX512, RDM

• DMX channels: (theatre) 1 / 2 / 4 / 5 / 6 / 10 / 15 / 17 ch - (tour) 4 / 6 / 10 / 15channel

• RDM: RDM ready for xture remote monitor and settings

• Display: black OLED high resolution display

• Firmware upgrade: yes, via USB-DMX interface (UPBOX1) not included

• Master/Slave: for synchronized operation of more units linked in a chain

ELECTRONICS

• Dimmer: linear 0~100% electronic dimmer

• Dimmer curves: 4 dierent dimming curves available

• Strobe / shutter: 1-30 Hz, electronic

• Operating temperature: -10° ~ +45°

• Flicker: icker free operation

• Selectable PWM: 600~25K Hz

ELECTRICAL

• Power consumption: 320W

• Power supply: 100-240V – 50/60Hz

• Power consumption (at 230V): 148.7W

• Power consumption (at 120V): 152.5W

• Output (at 230V): 14 units on a single power line

• Output (at 120V): 7 units on a single power line

• Power factor: pF 0.99 @ 120V - pF 0.94 @ 230V

PHYSICAL

• Cooling: forced air with low noise fan

• Sospension and xing: any position with quick-lock omega brackets

• Signal connection: Amphenol XLR 3p + 5p IN/OUT connectors

• Power connection: Neutrik powerCON IN/OUT connectors

• IP rating: 20

• Dimensions (WxHxD): 316x404x317mm

• Weight: 5.7kg

316mm/12,44in 318mm/12,52in

404mm/15,91in

ECLPARFC

11

3

2

8

10

9

5

6

7

4

Fig.2

5

ECLPARFC

1.2 OPERATING ELEMENTS AND CONNECTIONS

1. LOCKING KNOB for mounting bracket.

2. MOUNTING BRACKET.

3. CONTROL PANEL with display and 4 button

used to access the control panel functions

and manage them.

4. DMX IN (3-pole XLR): 1 = ground, 2 = DMX -,

3 = DMX +.

5. DMX OUT (3-pole XLR): 1= ground, 2 = DMX

-, 3 = DMX +.

6. DMX IN (5-pole XLR): 1 = ground, 2 = DMX-, 3

= DMX+, 4 N/C, 5 N/C.

7. DMX OUT (5-pole XLR): 1 = ground, 2 = DMX-,

3 = DMX+, 4 N/C, 5 N/C.

8. POWER IN (PowerCON IN): for connection to a

socket (100-240V~/50-60Hz) via the supplied

mains cable.

9. MAIN FUSE HOLDER: replace a burnt-out fuse

by one of the same type only.

10. POWER OUT (PowerCON OUT): power output

for connection of multiple units in series.

Fig.3

6

ECPARFC

- 2 - INSTALLATION

2.1 MOUNTING

ECLPARFC may be set up on a solid and even surface. The unit can also be mounted upside down to a cross

arm. For xing, stable mounting clips are required. The mounting place must be of sucient stability and

be able to support a weight of 10 times of the unit’s weight.

When carrying out any installation, always comply scrupulously with all the regulations (particularly re-

garding safety) currently in force in the country in which the xture’s being used.

• Install the projector at a suitable location by means of the mounting bracket .

• Always additionally secure the projector with the safety rope from falling down. For this purpose, fas-

ten the safety rope at a suitable position so that the maximum fall of the projector will be 20 cm.

• Adjust the projector and use the knob to slightly release or tighten the locking mechanism of the

bracket if is necessary .

NOTE - For the installation of the projector ECLPARFC insert the hook to stare it to a suspended system.

MENU UP DOWN ENTER

Used to access the menu or

to return a previous menu

option

Navigates downwards through

the menu list and increases

the numeric value when in a

function

Navigates upwards through

the menu list and decreases

the numeric value when in

a function

Used to select and store the

current menu or conrm the

current function value or

option within a menu

7

ECLPARFC

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION

To turn on the ECLPARFC connect the supplied main cable to a socket (100-240 VAC-50/60 Hz). Then the

unit is ready for operation and can be operated via a DMX controller or it independently performs its show

program in succession.

To switch o, disconnect the mains plug from the socket. For a more convenient operation it is recom-

mended to connect the unit to a socket which can be switched on and o via a light switch.

It is the responsibility of the installer to ensure the electrical, mechanical and thermal compatibility of the

track system and the ttings. The connection to the main network of electric distribution must be carried

out by a qualied electrical installer.

ATTENTION - Make sure to remove the tension of feeding before beginning any intervention of mainte-

nance.

3.2 BASIC

Access control panel functions using the four panel buttons located directly underneath the LED Display

(g.4).

Fig.4- Functions of the buttons

MENU

1 CONNECT

ð

DMX Address

ð

Value (001-512)

DMX Mode

ð

Theater ð

1 Ch

ð

Amber Shift on Default: 001

Color Temperature:

2800K

3200K

3500K

4000K

4500K

5000K

5600K

6000K

6500K

Hue

<-025-025>

White Calibration:

Red <000-255>

Green <000-255>

Blue <000-255>

White <000-255>

2 Ch

ð

Amber Shift on

Color Temperature:

2800K

3200K

3500K

4000K

4500K

5000K

5600K

6000K

6500K

Hue

<-025-025>

White Calibration:

Red <000-255>

Green <000-255>

Blue <000-255>

White <000-255>

4Ch1

5Ch

6Ch1

10Ch1

15Ch1

17Ch1

Tour

ð

4Ch2

6Ch2

10Ch2

15Ch2

2 SETUP

ð

Screen

ð

Back Light

ð

On

10S

20S

30S

Flip Display

ð

NO-Yes

Key Lock

ð

NO-Yes

3 ADVANCED

ð

Full On Mode

ð

HB

Studio

Dimmer

Mode

ð

O

Dimmer 1

Dimmer 2

Dimmer 3

8

ECPARFC

3.3 MENU STRUCTURE

White Balance

ð

O

Manual:

Red <125-255>

Green <125-255>

Blue <125-255>

White <125-255>

Led Frequency

ð

600Hz

1200 Hz

2000 Hz

4000 Hz

6000Hz

25kHZ

Fan Mode

ð

Auto

On

O

Silent

Factory Reload

ð

NO-Yes

4 INFORMATION

ð

Fixture Hours

ð

0-9999

Version

ð

V1.0

UID

ð

15D00228****

5 STANDALONE

ð

Master/Slave

ð

Master/Slave

Eects

ð

Eect 1 <001-100>

Eect 2 <001-100>

Eect 3 <001-100>

Eect 4 <001-100>

Eect 5 <001-100>

Speed 1~100

Static

ð

Fixed color:

R

G

B

W

RG

RB

RW

GB

GW

BW

RGB

RGW

RBW

GBW

RGBW

Dimmer <000-255>

Color Temperature:

2800K

3200K

3500K

4000K

4500K

5000K

5600K

6000K

6500K

Dimmer <000-255>

Hue <-025-025>

Manual Color Mixer:

Red <000-255>

Green <000-255>

Blue <000-255>

White <000-255>

9

ECLPARFC

Number DMX

channels

Address of

start (example)

DMX address

occupied

Next possible start address

for unit No. 1

Next possible start address

for unit No. 2

Next possible start address

for unit No. 3

1 33 33 34 35 36

2 33 33-34 35 37 39

4 33 33 - 36 37 41 45

5 33 33 - 37 38 43 48

6 33 33 - 38 39 45 51

10 33 33 - 42 43 53 63

15 33 33 - 47 48 63 78

17 33 33 - 49 50 67 84

10

ECPARFC

3.4 DMX MODE

• Press the button MENU so many times until the display shows DMX ADDRESS, and press the button ENTER

to conrm.

• Press UP/DOWN button to select the desired value (001-512). Press and hold to scroll quickly.

• Press ENTER button to store.

• Press the MENU button to go back or to meet the waiting time to exit the setup menu.

To able to operate the ECLPARFC with a light controller, adjust the DMX start address for the rst a DMX

channel. If e. g. address 33 on the controller is provided for controlling the function of the rst DMX

channel, adjust the start address 33 on the ECLPARFC. The other functions of the light eect panel are

then automatically assigned to the following addresses.

An example with the start address 33 is shown below:

. . . . . . . . . . . .

DMX Address: 33 DMX Address: 48DMX Address: 38 DMX Address: 43

Fig.5 - Example 5 DMX channels conguration

. . . . . . . . . . . .

DMX512 Controller

3.5 DMX CONFIGURATION

ECLPARFC is equipped with dierent DMX conguration.

• Press the button MENU so many times until shows DMX CHANNEL, and press the button ENTER to conrm.

• Select the desired DMX conguration (THEATRE 1 / 2 / 4 / 5 / 6 / 10 / 15 / 17 ch - TOUR 4 / 6 / 10 / 15 channel) through

the buttons UP/DOWN.

The tables on pages 11, 12, 13, 14, 15, 16 and 17 indicate the operating modes and relative DMX values.

THEATRE 1 CHANNEL

MODE

FUNCTION DMX

Value

1 Ch

1

DIMMER

0~100% 000 - 255

THEATRE4 CHANNELS 1

MODE

FUNCTION DMX

Value

4 Ch 1

1

DIMMER

0~100% 000 - 255

2

CTO

2800K -3200K

3200K-3500 K

3500K-4000K

4000K-4500K

4500K-5000K

5000K-5600K

5600K-6000K

6000K-6500K

000 - 031

032 - 063

064 - 095

096 - 127

128 - 159

160 - 191

192 - 223

224 - 255

3

HUE

0

-25~25

000 - 000

001 - 255

4

DIMMER SPEED MODE

Preset dimmer speed from display menu

Dimmer speed mode o

Dimmer speed mode1 (fast speed)

Dimmer speed mode2 (middle speed)

Dimmer speed mode3 (slow speed)

000 - 051

052 - 101

102 - 152

153 - 203

204 - 255

THEATRE5 CHANNELS

MODE

FUNCTION DMX

Value

5 Ch

1

DIMMER

0~100% 000 - 255

2

CTO

2800K -3200K

3200K-3500 K

3500K-4000K

4000K-4500K

4500K-5000K

5000K-5600K

5600K-6000K

6000K-6500K

000 - 031

032 - 063

064 - 095

096 - 127

128 - 159

160 - 191

192 - 223

224 - 255

3

HUE

0

-25~25

000 - 000

001 - 255

4

STROBE

NO Function

Strobe Slow to Fast

000 - 010

011 - 255

5

DIMMER SPEED MODE

Preset dimmer speed from display menu

Dimmer speed mode o

Dimmer speed mode1 (fast speed)

Dimmer speed mode2 (middle speed)

Dimmer speed mode3 (slow speed)

000 - 051

052 - 101

102 - 152

153 - 203

204 - 255

THEATRE 2 CHANNELS

MODE

FUNCTION DMX

Value

2 Ch

1

DIMMER

0~100% 000 - 255

2

DIMMER SPEED MODE

Preset dimmer speed from display menu

Dimmer speed mode o

Dimmer speed mode1 (fast speed)

Dimmer speed mode2 (middle speed)

Dimmer speed mode3 (slow speed)

000 - 051

052 - 101

102 - 152

153 - 203

204 - 255

11

ECLPARFC

3.6 CHANNELS DMX

THEATRE 6 CHANNELS

MODE

FUNCTION DMX

Value

6 Ch 1

1

DIMMER

0~100% 000 - 255

2

CTO

2800K -3200K

3200K-3500 K

3500K-4000K

4000K-4500K

4500K-5000K

5000K-5600K

5600K-6000K

6000K-6500K

000 - 031

032 - 063

064 - 095

096 - 127

128 - 159

160 - 191

192 - 223

224 - 255

3

HUE

0

-25~25

000 - 000

001 - 255

4

STROBE

NO Function

Strobe Slow to Fast

000 - 010

011 - 255

5

COLOR MACRO

No Function

Amber Shift on

Color Macro

000 - 002

003 - 005

006 - 255

6

DIMMER SPEED MODE

Preset dimmer speed from display menu

Dimmer speed mode o

Dimmer speed mode1 (fast speed)

Dimmer speed mode2 (middle speed)

Dimmer speed mode3 (slow speed)

000 - 051

052 - 101

102 - 152

153 - 203

204 - 255

THEATRE 10 CHANNELS 1

MODE

FUNCTION DMX

Value

10 Ch 1

1

DIMMER

0~100% 000 - 255

2

RED

0~100% 000 - 255

3

GREEN

0~100% 000 - 255

4

BLUE

0~100% 000 - 255

5

WHITE

0~100% 000 - 255

6

CTO

2800K-3200K

3200K-3500K

3500K-4000K

4000K-4500K

4500K-5000K

5000K-5600K

5600K-6000K

6000K-6500K

No Function

000 - 030

031 - 060

061 - 090

091 - 120

121 - 150

151 - 180

181 - 210

211 - 240

241 - 255

7

HUE

0

-25~25

000 - 000

001 - 255

8

STROBE

NO Function

Strobe Slow to Fast

000 - 010

011 - 255

9

COLOR MACRO

No Function

Amber Shift on

Color Macro

000 - 002

003 - 005

006 - 255

10

DIMMER SPEED MODE

Preset dimmer speed from display menu

Dimmer speed mode o

Dimmer speed mode1 (fast speed)

Dimmer speed mode2 (middle speed)

Dimmer speed mode3 (slow speed)

000 - 051

052 - 101

102 - 152

153 - 203

204 - 255

12

ECPARFC

THEATRE 15 CHANNELS 1

MODE

FUNCTION DMX

Value

15 Ch 1

1

DIMMER

0~100% 000 - 255

2

DIMMER FINE

0~100% 000 - 255

3

RED

0~100% 000 - 255

4

RED FINE

0~100% 000 - 255

5

GREEN

0~100% 000 - 255

6

GREEN FINE

0~100% 000 - 255

7

BLUE

0~100% 000 - 255

8

BLUE FINE

0~100% 000 - 255

9

WHITE

0~100% 000 - 255

10

WHITE FINE

0~100% 000 - 255

11

CTO

2800K-3200K

3200K-3500K

3500K-4000K

4000K-4500K

4500K-5000K

5000K-5600K

5600K-6000K

6000K-6500K

No Function

000 - 030

031 - 060

061 - 090

091 - 120

121 - 150

151 - 180

181 - 210

211 - 240

241 - 255

12

HUE

0

-25~25

000 - 000

001 - 255

13

STROBE

NO Function

Strobe Slow to Fast

000 - 010

011 - 255

14

COLOR MACRO

No Function

Amber Shift on

Color Macro

000 - 002

003 - 005

006 - 255

15

DIMMER SPEED MODE

Preset dimmer speed from display menu

Dimmer speed mode o

Dimmer speed mode1 (fast speed)

Dimmer speed mode2 (middle speed)

Dimmer speed mode3 (slow speed)

000 - 051

052 - 101

102 - 152

153 - 203

204 - 255

THEATRE 17 CHANNELS

MODE

FUNCTION DMX

Value

17 Ch 1

1

DIMMER

0~100% 000 - 255

2

DIMMER FINE

0~100% 000 - 255

3

STROBE

No Function (shutter open)

Strobe eect slow to fast

No Function (shutter open)

Random strobe eect slow to fast

No Function (shutter open)

000 - 030

031 - 100

101 - 130

131 - 200

201 - 255

4

CTO

2800K-3200K

3200K-3500K

3500K-4000K

4000K-4500K

4500K-5000K

5000K-5600K

5600K-6000K

6000K-6500K

000-031

032-063

064-095

096-127

128-159

160-191

192-223

224-255

5

HUE

0

-25~25

000 - 000

001 - 255

6

CROSSFADE

0~100% 000 - 255

7

RED

0~100% 000 - 255

8

RED FINE

0~100% 000 - 255

9

GREEN

0~100% 000 - 255

10

GREEN FINE

0~100% 000 - 255

11

BLUE

0~100% 000 - 255

12

BLUE FINE

0~100% 000 - 255

13

WHITE

0~100% 000 - 255

14

WHITE FINE

0~100% 000 - 255

15

COLOR MACRO

No Function

Amber Shift on

Color Macro

000 - 002

003 - 005

006 - 255

16

CTO ON COLORS

0~100% 000 - 255

17

DIMMER SPEED MODE

Preset dimmer speed from display menu

Dimmer speed mode o

Dimmer speed mode1 (fast speed)

Dimmer speed mode2 (middle speed)

Dimmer speed mode3 (slow speed)

000 - 051

052 - 101

102 - 152

153 - 203

204 - 255

13

ECLPARFC

TOUR 10 CHANNELS

MODE

FUNCTION DMX

Value

10 Ch 2

1

DIMMER

0~100% 000 - 255

2

RED

0~100% 000 - 255

3

GREEN

0~100% 000 - 255

4

BLUE

0~100% 000 - 255

5

WHITE

0~100% 000 - 255

6

STROBE

NO Function

Strobe Slow to Fast

000 - 010

011 - 255

7

COLOR TEMPERATURE

No Function

2800K

3200K

3500K

4000K

4500K

5000K

5600K

6000K

6500K

No Function

000 - 005

006 - 030

031 - 055

056 - 080

081 - 105

106 - 130

131 - 155

156 - 180

181 - 205

206 - 230

231 - 255

8

AUTO PROGRAMS

No Function

Auto Program 1

Auto Program 2

Auto Program 3

Auto Program 4

Auto Program 5 (Auto Program1-4)

000 - 010

011 - 060

061 - 110

111 - 160

161 - 210

211 - 255

9

AUTO SPEED

Auto speed slow to fast 000 - 255

10

DIMMER SPEED MODE

Preset dimmer speed from display menu

Dimmer speed mode o

Dimmer speed mode1 (fast speed)

Dimmer speed mode2 (middle speed)

Dimmer speed mode3 (slow speed)

000 - 051

052 - 101

102 - 152

153 - 203

204 - 255

TOUR 6 CHANNELS 2

MODE

FUNCTION DMX

Value

6 Ch 2

1

DIMMER

0~100% 000 - 255

2

RED

0~100% 000 - 255

3

GREEN

0~100% 000 - 255

4

BLUE

0~100% 000 - 255

5

WHITE

0~100% 000 - 255

6

STROBE

NO Function

Strobe Slow to Fast

000 - 010

011 - 255

TOUR 4 CHANNELS 2

MODE

FUNCTION DMX

Value

4 Ch 2

1

RED

0~100% 000 - 255

2

GREEN

0~100% 000 - 255

3

BLUE

0~100% 000 - 255

4

WHITE

0~100% 000 - 255

14

ECPARFC

TOUR 15 CHANNELS 2

MODE

FUNCTION DMX

Value

15 Ch 2

1

DIMMER

0~100% 000 - 255

2

DIMMER FINE

0~100% 000 - 255

3

RED

0~100% 000 - 255

4

RED FINE

0~100% 000 - 255

5

GREEN

0~100% 000 - 255

6

GREEN FINE

0~100% 000 - 255

7

BLUE

0~100% 000 - 255

8

BLUE FINE

0~100% 000 - 255

9

WHITE

0~100% 000 - 255

10

WHITE FINE

0~100% 000 - 255

11

STROBE

NO Function

Strobe Slow to Fast

000 - 010

011 - 255

12

COLOR TEMPERATURE

No Function

2800K

3200K

3500K

4000K

4500K

5000K

5600K

6000K

6500K

No Function

000 - 005

006 - 030

031 - 055

056 - 080

081 - 105

106 - 130

131 - 155

156 - 180

181 - 205

206 - 230

231 - 255

13

AUTO PROGRAMS

No Function

Auto Program 1

Auto Program 2

Auto Program 3

Auto Program 4

Auto Program 5 (Auto Program1-4)

000 - 010

011 - 060

061 - 110

111 - 160

161 - 210

211 - 255

14

AUTO SPEED

Auto speed slow to fast 000 - 255

15

DIMMER SPEED MODE

Preset dimmer speed from display menu

Dimmer speed mode o

Dimmer speed mode1 (fast speed)

Dimmer speed mode2 (middle speed)

Dimmer speed mode3 (slow speed)

000 - 051

052 - 101

102 - 152

153 - 203

204 - 255

15

ECLPARFC

16

ECPARFC

3.7 SCREEN

You can change the following parameters related to the display, following the same procedure:

• Press the MENU button to access the main menu.

• Press the UP / DOWN keys to scroll the menu, select Set Up, then press the ENTER button to enter the

next menu.

• Press UP / DOWN to scroll through the menu, then select Screen, and press the ENTER button to enter

the next menu.

• Press UP / DOWN to scroll through the menu, and then select one of the following settings for the dis-

play and press the ENTER key to display it.

- Back Light - Backlight display Auto O. This feature allows you to automatically turn o the backlight

after a specied time that you can set using the arrow buttons. To have the display always on select

On or choose another value to turn o the display after the amount of time you choose.

- Flip Display - Orientation of the display. This function allows you to rotate the display 180° to get a

better view of the display when the unit is hanging upside down. Select YES to activate or NO to dis-

able this function.

- Key Lock - With this function, you can lock the buttons on the control panel. If this functionis activat-

ed, the keys are automatically locked. To disable or temporarily disable the key lock function, press

the buttons in the following order to regain access to menu commands: UP, DOWN, UP, DOWN,

ENTER. Select ON to activate or OFF to disable

• Press the ENTER button to conrm your choice.

• Press the MENU button repeatedly to exit the menu and save changes.ù

3. 8 FIXTURE SETTINGS

It is possible to change the parameter value in the following way:

DIMMER

• Enter in Dimmer mode to select specic dimming curve, press the button MENU so many times until

shows DIM MODE, and press the button ENTER to conrm.

• Press the button UP/DOWN to select OFF - DIM1 - DIM2 - DIM3.

• Press ENTER button to store.

• Press the MENU button to go back or to meet the waiting time to exit the setup menu.

LED FREQUENCY

• To adjust the frequency of the LEDs, press the MENU button repeatedly until the display shows LED

Frequency, and then press the ENTER button.

• Select the frequency (600Hz - 1200Hz - 2000Hz - 4000Hz - 6000Hz - 25kHz) using the UP/DOWN buttons.

• To conrm, press the ENTER key.

• Press the MENU button to go back or wait a few seconds to exit the setup menu.

FAN MODE

• Select this function to set the fans operation mode. Use the arrow buttons to select Auto, On, O, Silent.

Press the ENTER button to conrm your choice

FACTORY RELOAD

Select this function to reset the unit to the factory settings:

- To activate Reset Factory display press the button MENU so many times until shows Factory Reload, and

press the button ENTER to conrm.

• Press ENTER button to conrm the selection.

• Press the MENU button to go back or to meet the waiting time to exit from the setup menu automati-

cally.

17

ECLPARFC

3. 9 FIXTURE INFORMATION

To view all the information on the device, proceed as follows:

• Press the MENU button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the icon Information, then press the ENTER but-

ton to enter the next menu.

• Press the UP/DOWN button to scroll through the menu, then select one of the following information

and press the ENTER button to display it.

- Fixture Hours - Through the Fixture Time function you can display the operating time of the projector.

- Software Version - Through Version function you can display the currently installed software version.

- UID - This option shows the RDM identication number

• Press the MENU button repeatedly to exit the menu.

3. 10 OPERATIONS IN AUTOMATIC MODE

MASTER SLAVE

Press the UP/DOWN button to scroll through the menu, select Master/Slave and press ENTER to conrm

your choice.

• Press the UP/DOWN button to select the mode of operation:

- Master, if the unit is connected in series with other units and it acts as the Master;

- Slave, if the unit is not connected to other units.

• Press the ENTER button to conrm your choice.

EFFECTS

The unit independently runs through its show. Before you send an automatic program you need to set the

drive as Master/Alone:

• Press the MENU button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Eects icon, then press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to select the mode of operation: Eects 1, Eects 2, Eects 3

• Press the ENTER button to conrm your choice.

• Press the MENU button repeatedly to exit the menu and save changes.

The unit will go into automatic mode by executing the program automatically.

STATIC MODE

This xture has the ability to accept custom static color settings. Access these chases via the control panel

on the back of the xture.

• Press the button MENU so many times until the display shows Static, then press the button ENTER.

• Select Fixed Color through the buttons UP/DOWN, then press the button ENTER.

• Set the colors R, G, B, W, RG, RB, RW, GB, GW, BW RGB, RGW, RBW, GBW, RGBW, through the buttons UP/DOWN,

then press the button ENTER.

• Press the MENU button to go back or to meet the waiting time to exit the setup menu.

NOTE: If the projector is in Blackout mode before synchronizing with the DMX signal, and if the DMX signal

is lost, the projector will remain on according to the last received DMX value.

If the projector was in STATIC or AUTO mode before synchronizing with the DMX signal, if the DMX signal

is lost, the projector will return to the previously set STATIC or AUTO.

18

ECPARFC

- 4 - MAINTENANCE

4.1 MAINTENANCE AND CLEANING THE UNIT

• Make sure the area below the installation place is free from unwanted persons during setup.

• Switch o the unit, unplug the main cable and wait until the unit has cooled down.

• All screws used for installing the device and any of its parts should be tightly fastened and should not

be corroded.

• Housings, xations and installation spots (ceiling, trusses, suspensions) should be totally free from any

deformation.

• The main cables must be in impeccable condition and should be replaced immediately even when a

small problem is detected.

• It is recommended to clean the front at regular intervals, from impurities caused by dust, smoke, or

other particles to ensure that the light is radiated at maximum brightness. For cleaning, disconnect the

main plug from the socket. Use a soft, clean cloth moistened with a mild detergent. Then carefully wipe

the part dry. For cleaning other housing parts use only a soft, clean cloth. Never use a liquid, it might

penetrate the unit and cause damage to it.

4.2 FUSE REPLACEMENT

1. Remove the safety cap by a screwdriver.

2. Replace the blown fuse with a fuse of the exact same type and rating.

3. Install the safety cap, and reconnect power.

4.3 TROUBLESHOOTING

Problems Possible causes Checks and remedies

Fixture does not light up

• No mains supply

• Dimmer fader set to 0

• Faulty LED

• Check the power supply voltage

• Increase the value of the dimmer channels

• Replace the LED board

General low light intensity

• Dirty lens assembly

• Misaligned lens assembly

• Clean the xture regularly

• Install lens assembly properly

Fixture does not power up

• No power

• Loose or damaged power cord

• Check for power on power outlet

• Check power cord

Contact an authorized service center in case of technical problems or not reported in the table can not be

resolved by the procedure given in the table.

La pagina sta caricando ...

ProLights ECLPARFC Manuale utente

ProLights ECLPARFC Manuale utente

in altre lingue

Documenti correlati

Altri documenti