Yamaha MO8 Manuale del proprietario

OWNER’S MANUAL

MUSIC PRODUCTION SYNTHESIZER

EN

SPECIAL MESSAGE SECTION

This product utilizes batteries or an external power supply

(adapter). DO NOT connect this product to any power supply or

adapter other than one described in the manual, on the name

plate, or speciﬁcally recommended by Yamaha.

WARNING: Do not place this product in a position where

anyone could walk on, trip over, or roll anything over power or

connecting cords of any kind. The use of an extension cord is

not recommended! If you must use an extension cord, the

minimum wire size for a 25’ cord (or less) is 18 AWG. NOTE: The

smaller the AWG number, the larger the current handling

capacity. For longer extension cords, consult a local electrician.

This product should be used only with the components supplied

or; a cart, rack, or stand that is recommended by Yamaha. If a

cart, etc., is used, please observe all safety markings and

instructions that accompany the accessory product.

SPECIFICATIONS SUBJECT TO CHANGE:

The information contained in this manual is believed to be

correct at the time of printing. However, Yamaha reserves the

right to change or modify any of the speciﬁcations without

notice or obligation to update existing units.

This product, either alone or in combination with an ampliﬁer

and headphones or speaker/s, may be capable of producing

sound levels that could cause permanent hearing loss. DO NOT

operate for long periods of time at a high volume level or at a

level that is uncomfortable. If you experience any hearing loss

or ringing in the ears, you should consult an audiologist.

IMPORTANT: The louder the sound, the shorter the time

period before damage occurs.

Some Yamaha products may have benches and / or accessory

mounting ﬁxtures that are either supplied with the product or as

optional accessories. Some of these items are designed to be

dealer assembled or installed. Please make sure that benches

are stable and any optional ﬁxtures (where applicable) are well

secured BEFORE using.

Benches supplied by Yamaha are designed for seating only. No

other uses are recommended.

NOTICE:

Service charges incurred due to a lack of knowledge relating to

how a function or effect works (when the unit is operating as

designed) are not covered by the manufacturer’s warranty, and

are therefore the owners responsibility. Please study this manual

carefully and consult your dealer before requesting service.

ENVIRONMENTAL ISSUES:

Yamaha strives to produce products that are both user safe and

environmentally friendly. We sincerely believe that our products

and the production methods used to produce them, meet these

goals. In keeping with both the letter and the spirit of the law, we

want you to be aware of the following:

Battery Notice:

This product MAY contain a small non-rechargeable battery

which (if applicable) is soldered in place. The average life span

of this type of battery is approximately ﬁve years. When

replacement becomes necessary, contact a qualiﬁed service

representative to perform the replacement.

This product may also use “household” type batteries. Some of

these may be rechargeable. Make sure that the battery being

charged is a rechargeable type and that the charger is intended

for the battery being charged.

When installing batteries, do not mix batteries with new, or with

batteries of a different type. Batteries MUST be installed

correctly. Mismatches or incorrect installation may result in

overheating and battery case rupture.

Warning:

Do not attempt to disassemble, or incinerate any battery. Keep

all batteries away from children. Dispose of used batteries

promptly and as regulated by the laws in your area. Note: Check

with any retailer of household type batteries in your area for

battery disposal information.

Disposal Notice:

Should this product become damaged beyond repair, or for

some reason its useful life is considered to be at an end, please

observe all local, state, and federal regulations that relate to the

disposal of products that contain lead, batteries, plastics, etc. If

your dealer is unable to assist you, please contact Yamaha

directly.

NAME PLATE LOCATION:

The name plate is located on the rear (MO8) or bottom (MO6) of

the product. The model number, serial number, power

requirements, etc., are located on this plate. You should record

the model number, serial number, and the date of purchase in

the spaces provided below and retain this manual as a

permanent record of your purchase.

Model

Serial No.

Purchase Date

PLEASE KEEP THIS MANUAL

MIDI

THRU OUT IN

USB

TO DEVICE TO HOST

MO8

MO6

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions con-

tained in this manual, meets FCC requirements. Modiﬁcations not

expressly approved by Yamaha may void your authority, granted by

the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories and/

or another product use only high quality shielded cables. Cable/s

supplied with this product MUST be used. Follow all installation

instructions. Failure to follow instructions could void your FCC

authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply with the

requirements listed in FCC Regulations, Part 15 for Class “B” digital

devices. Compliance with these requirements provides a reason-

able level of assurance that your use of this product in a residential

environment will not result in harmful interference with other elec-

tronic devices. This equipment generates/uses radio frequencies

and, if not installed and used according to the instructions found in

the users manual, may cause interference harmful to the operation

of other electronic devices. Compliance with FCC regulations does

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)

not guarantee that interference will not occur in all installations. If

this product is found to be the source of interference, which can be

determined by turning the unit “OFF” and “ON”, please try to elimi-

nate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by

the interference.

Utilize power outlets that are on different branch (circuit breaker or

fuse) circuits or install AC line ﬁlter/s.

In the case of radio or TV interference, relocate/reorient the

antenna. If the antenna lead-in is 300 ohm ribbon lead, change the

lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory results,

please contact the local retailer authorized to distribute this type of

product. If you can not locate the appropriate retailer, please con-

tact Yamaha Corporation of America, Electronic Service Division,

6600 Orangethorpe Ave, Buena Park, CA90620

The above statements apply ONLY to those products distributed by

Yamaha Corporation of America or its subsidiaries.

FCC INFORMATION (U.S.A.)

* This applies only to products distributed by

YAMAHA CORPORATION OF AMERICA.

COMPLIANCE INFORMATION STATEMENT

(DECLARATION OF CONFORMITY PROCEDURE)

Responsible Party : Yamaha Corporation of America

Address : 6600 Orangethorpe Ave., Buena Park, Calif. 90620

Telephone : 714-522-9011

Type of Equipment : MUSIC PRODUCTION SYNTHESIZER

Model Name : MO6, MO8

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following conditions:

1)this device may not cause harmful interference, and

2)this device must accept any interference received including interference

that may cause undesired operation.

See user manual instructions if interference to radio reception is sus-

pected.

(FCC DoC)

OBSERVERA!

Apparaten kopplas inte ur växelströmskällan (nätet) så länge som den

ar ansluten till vägguttaget, även om själva apparaten har stängts av.

ADVARSEL: Netspæendingen til dette apparat er IKKE afbrudt,

sålæenge netledningen siddr i en stikkontakt, som er t endt — også

selvom der or slukket på apparatets afbryder.

VAROITUS: Laitteen toisiopiiriin kytketty käyttökytkin ei irroita koko

laitetta verkosta.

(standby)

(3)-9 1/2

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep this manual in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical

shock, short-circuiting, damages, ﬁre or other hazards. These precautions include, but are not limited to, the following:

• Only use the voltage speciﬁed as correct for the instrument. The required

voltage is printed on the name plate of the instrument.

• Use the speciﬁed adaptor (PA-5D or an equivalent recommended by Yamaha)

only. Using the wrong adaptor can result in damage to the instrument or

overheating.

• Check the electric plug periodically and remove any dirt or dust which may have

accumulated on it.

• Do not place the AC adaptor cord near heat sources such as heaters or radiators,

and do not excessively bend or otherwise damage the cord, place heavy objects

on it, or place it in a position where anyone could walk on, trip over, or roll

anything over it.

• Do not open the instrument or attempt to disassemble the internal parts or

modify them in any way. The instrument contains no user-serviceable parts. If it

should appear to be malfunctioning, discontinue use immediately and have it

inspected by qualiﬁed Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in damp or wet

conditions, or place containers on it containing liquids which might spill into

any openings.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit.

A burning item may fall over and cause a ﬁre.

• If the AC adaptor cord or plug becomes frayed or damaged, or if there is a

sudden loss of sound during use of the instrument, or if any unusual smells or

smoke should appear to be caused by it, immediately turn off the power switch,

disconnect the adaptor plug from the outlet, and have the instrument inspected

by qualiﬁed Yamaha service personnel.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage

to the instrument or other property. These precautions include, but are not limited to, the following:

• When removing the electric plug from the instrument or an outlet, always hold

the plug itself and not the cord.

• Unplug the AC power adaptor when not using the instrument, or during

electrical storms.

• Do not connect the instrument to an electrical outlet using a multiple-connector.

Doing so can result in lower sound quality, or possibly cause overheating in the

outlet.

• Do not expose the instrument to excessive dust or vibrations, or extreme cold or

heat (such as in direct sunlight, near a heater, or in a car during the day) to

prevent the possibility of panel disﬁguration or damage to the internal

components.

• Do not use the instrument in the vicinity of a TV, radio, stereo equipment,

mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio

may generate noise.

• Do not place the instrument in an unstable position where it might accidentally

fall over.

• Before moving the instrument, remove all connected adaptor and other cables.

• When setting up the instrument, make sure that the AC outlet you are using is

easily accessible. If some trouble or malfunction occurs, immediately turn off

the power switch and disconnect the plug from the outlet.

Power supply/AC power adaptor

Do not open

Water warning

Fire warning

If you notice any abnormality

Power supply/AC power adaptor Location

(3)-9 2/2

• Before connecting the instrument to other electronic components, turn off the

power for all components. Before turning the power on or off for all

components, set all volume levels to minimum. Also, be sure to set the volumes

of all components at their minimum levels and gradually raise the volume

controls while playing the instrument to set the desired listening level.

• When cleaning the instrument, use a soft, dry cloth. Do not use paint thinners,

solvents, cleaning ﬂuids, or chemical-impregnated wiping cloths.

• Do not insert a ﬁnger or hand in any gaps on the instrument.

• Never insert or drop paper, metallic, or other objects into the gaps on the panel

or keyboard. If this happens, turn off the power immediately and unplug the

power cord from the AC outlet. Then have the instrument inspected by qualiﬁed

Yamaha service personnel.

• Do not place vinyl, plastic or rubber objects on the instrument, since this might

discolor the panel or keyboard.

• Do not rest your weight on, or place heavy objects on the instrument, and do not

use excessive force on the buttons, switches or connectors.

• Do not operate the instrument for a long period of time at a high or

uncomfortable volume level, since this can cause permanent hearing loss. If you

experience any hearing loss or ringing in the ears, consult a physician.

Saving and backing up your data

• DRAM data (see page 150) is lost when you turn off the power to the instrument.

Save the data to a USB storage device.

• Never attempt to turn off the power while data is being written to Flash ROM

(while an “Executing...” or “Please keep power on” message is shown). Turning

the power off in this state results in loss of all user data and may cause the

system to freeze (due to corruption of data in the Flash ROM). This means that

this synthesizer may not be able to start up properly, even when turning the

power on next time.

Backing up the USB storage device

•To protect against data loss through media damage, we recommend that you

save your important data onto two USB storage devices.

Yamaha cannot be held responsible for damage caused by improper use or modiﬁcations to the instrument, or data that is lost or destroyed.

Always turn the power off when the instrument is not in use.

Even when the power switch is in the “STANDBY” position, electricity is still ﬂowing to the instrument at the minimum level. When you are not using the instrument for a long

time, make sure you unplug the AC power adaptor from the wall AC outlet.

Connections

Maintenance

Handling caution

Saving data

Introduction

6

Owner’s Manual

Introduction

Congratulations and thank you for your purchase of the Yamaha MO Music Production Synthesizer!

You now own a fantastic-sounding, highly versatile keyboard—one that combines comprehensive synthesizer sound-

crafting controls and powerful performance/recording features in a total music production instrument.

Virtually all of our synthesizer technology and music making know-how went into the design of this instrument. The new MO

not only gives you the latest and greatest sounds and rhythms (as well as the ability to create your own), it gives you

powerful, easy-to-use tools for playing, combining and controlling these dynamic sounds/rhythms—in real time, as you

perform!

Take time to look through this manual carefully. It’s packed with important information on how to get the most from this

amazing instrument.

Dive in now and enjoy!

Accessories

The following items have been included with your MO. Check to see that you have everything listed here.

❏ Power adaptor (PA-5D)*

❏ Owner’s Manual (this document)

❏ Data List

* May not be included in your area. Please check with your Yamaha dealer.

The illustrations and LCD screens as shown in this owner’s manual are for instructional purposes only, and

may appear somewhat different from those on your instrument.

This product incorporates and bundles computer programs and contents in which Yamaha owns

copyrights or with respect to which it has license to use others’ copyrights. Such copyrighted materials

include, without limitation, all computer software, style ﬁles, MIDI ﬁles, WAVE data, musical scores and

sound recordings. Any unauthorized use of such programs and contents outside of personal use is not

permitted under relevant laws. Any violation of copyright has legal consequences. DON’T MAKE,

DISTRIBUTE OR USE ILLEGAL COPIES.

This device is capable of using various types/formats of music data, and it optimizes the data in advance

to the proper format for use with the device. As a result, the data may not be played back precisely as the

creators or composers originally intended.

Copying of the commercially available musical data including but not limited to MIDI data and/or audio

data is strictly prohibited except for your personal use.

• Windows is the registered trademarks of Microsoft

®

Corporation.

• Apple and Macintosh are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.

• The company names and product names in this Owner’s Manual are the trademarks or registered

trademarks of their respective companies.

Main Features

7

Owner’s Manual

Main Features

●

Wide range of dynamic and authentic voices. Use the Category Search function to quickly call up the sounds you

want, based on their instrument type.

Page 42

●

Performance mode lets you use four different voices together—in layers or in a keyboard split. Page 44

●

Extensive effect processing, with Reverb (20 types), Chorus (49 types), three separate Insertion blocks each of which

has two blocks (total 116 types), Master Effect (8 types), and a digital equalizer (3-band Part EQ and 5-band Master

EQ).

Page 140

●

Comprehensive real-time control with four knobs and four sliders—letting you adjust ﬁlter, levels, effects, EG, and

more, while you play.

Page 51

●

Pattern mode functions let you craft different rhythmic sections and riffs as individual elements—which you can easily

and intuitively combine in real time to create full rhythm tracks.

Page 73

●

In addition to being able to create User voices in the Voice mode, you can create special Mixing voices for Songs and

Patterns. These voices can be edited and stored in the Song/Pattern mode, making it exceptionally easy and convenient

to create voices for use with Songs and Patterns.

Page 78

●

The versatile Arpeggio feature automatically plays a variety of sequenced phrases in response to the keys you play. This

function is especially powerful with drum voices—letting you easily call up various rhythm patterns at the touch of a key,

and providing instant inspiration for song creation and performance. When used with normal voices, the Arpeggio

phrase changes harmonically and melodically with the chords you play, giving you intuitive control over the patterns as

you compose or perform. Arpeggios can be triggered not only according to the keys you play, but also by how strongly

you play them—for even greater performance power.

Page 48

●

Once you’ve collected all the MIDI data and patterns you need for your song, use Pattern Chain to arrange the pieces in

real time. This hands-on approach makes it easier than ever to come up with great ideas and amazing songs.

Page 84

●

Song Scene is another powerful tool that lets you take “snapshots” of the sequencer track settings (such as pan,

volume, track mute and so on). Then, during playback or recording, simply switch among the Scenes for instant,

dynamic changes.

Page 89

●

Master mode—for using the MO as a master keyboard controller (with independent Zones), and for easily reconﬁguring

the instrument between Voice/Performance play and Song/Pattern play in live applications.

Page 122

●

Exceptionally easy-to-understand interface with two-tiered operation buttons: [F1] – [F6] and [SF1] – [SF5] Page 33

●

Remote Control—for operating your favorite sequencing software from the panel controls. Mute tracks, control transport

(Play, Stop, Record, etc.), mix both MIDI and audio tracks (up to 16) with this instrument’s knobs and sliders, pan the

tracks, control EQ, and tweak effect sends—all without ever touching the mouse.

Page 113

●

The digital output jacks (DIGITAL) ensure completely noise-free, distortion-free sound output (44.1kHz, 24 bit). Page 103

●

The instrument features two USB connectors—USB TO HOST for connecting to computer, and USB TO DEVICE for

connecting to storage devices, such as a hard disk drive or ﬂash disk.

Page 31

●

Compatibility with Yamaha’s powerful Voice Editor and Multi Part Editor software—featuring comprehensive, intuitive

editing of all parameters from your computer.

Page 112

How to use this manual

8

Owner’s Manual

How to use this manual

Application Index ................................................................................................................Page 9

This special index is organized not by single words, but by functions and applications—allowing you to quickly and

easily ﬁnd how to perform a particular operation or explore a topic of interest.

The Controls & Connectors ...............................................................................................Page 14

Use this section to ﬁnd out about all of the buttons, controls and connectors of this instrument.

Setting Up and Playing .....................................................................................................Page 20

Before going on to any other part of the manual, we strongly suggest you read this section ﬁrst. It shows you how to get

started playing and using your new instrument.

Basic Operation.................................................................................................................. Page 27

This section introduces you to the basic operating conventions of this instrument, such as editing values and changing

settings.

Quick Guide........................................................................................................................ Page 40

In this tutorial section, you will take a guided tour through the various functions of this instrument, and get some

hands-on experience in playing and using it.

Basic Structure ................................................................................................................. Page 128

This section provides a detailed overview of all of the main functions and features of this instrument, and shows how

they ﬁt together.

Reference .........................................................................................................................Page 151

The MO encyclopedia. This section explains all parameters, settings, functions, features, modes and operations in full detail.

Appendix ..........................................................................................................................Page 219

This section contains detailed information on the instrument, including the Speciﬁcations and an Alert Message List.

Troubleshooting............................................................................................................... Page 227

If this instrument does not function as expected or you have some problem with the sound or operation, refer to this

section before calling your Yamaha dealer or service center. Most common problems and their solutions are covered

here in a very simple and easy-to-understand way.

Data List (separate booklet)

This contains various important lists such as the Voice List, Preset Pattern Phrase List, Effect List, MIDI Data Format,

and MIDI Implementation Chart.

Throughout this manual, arrows are used in the instructions, indicating in shorthand the process of calling up certain

displays and functions. The example instructions below indicate to 1) press the [VOICE] button, 2) select a Normal

Voice, 3) press the [EDIT] button, 4) select an Element, 5) press the [F1] OSC button, and 6) press the [SF2] OUTPUT

button.

[VOICE] ➞ Normal Voice selection ➞ [EDIT] ➞ Element selection ➞ [F1] OSC ➞ [SF2] OUTPUT

n When a conﬁrmation message (page 37) or Control Function window (page 51) is shown in the display, press the [EXIT] button to exit from

that condition, then execute the instructions as in the above example. Likewise, press the [DAW REMOTE] button to exit from the Remote

Control mode, then execute the instructions as in the above example when the MO is in the Remote Control mode.

Application Index

9

Owner’s Manual

Listening to the MO

• Listening to the Demo Song/Pattern .............................................................................................................................................................. Page 73

• Listening to Song Chain playback.................................................................................................................................................................. Page 95

• Listening to Pattern Chain playback .............................................................................................................................................................. Page 84

• Listening to Arpeggio playback...................................................................................................................................................................... Page 48

Playing the keyboard

• Selecting a Voice and playing the keyboard..................................................................................Pages 40 (Voice mode), 76 (Song/Pattern mode)

• Selecting a Performance and playing the keyboard..................................................................................................................................... Page 44

• Using the instrument as a Master Keyboard ............................................................................................................................................... Page 122

• Sounding the metronome..................................... [SONG] or [PATTERN] → [UTILITY] → [F3] SEQ → [SF1] CLICK → Mode = all .......... Page 206

• Splitting the keyboard—Setting upper and lower ranges for the Voices................................Pages 47 (Performance mode), 125 (Master mode)

•Layering two Voices (or Parts) together.....................................................................................Pages 46 (Performance mode), 125 (Master mode)

Selecting programs and making settings on the MO

• Selecting a Voice ..............................................................................................................................Pages 40 (Voice mode), 76 (Song/Pattern mode)

Using the Category Search function.............................................................................................................................................................. Page 42

• Selecting a Performance ................................................................................................................................................................................. Page 44

• Selecting a Song.............................................................................................................................................................................................. Page 74

• Selecting a Pattern........................................................................................................................................................................................... Page 75

Selecting a Section.......................................................................................................................................................................................... Page 75

Selecting a Phrase and assigning it to a Pattern track................................................................................................................................. Page 78

• Selecting a Mixing template for a Song/Pattern............................................................................................................................................ Page 77

• Selecting a Master.......................................................................................................................................................................................... Page 122

• Selecting an Arpeggio type....................................................................................... Pages 48 (Voice/Performance mode), 80 (Song/Pattern mode)

• Selecting a Filter type.................................................................................................................................................................................... Page 170

• Selecting an Effect type

Selecting a Reverb type/Chorus type/Insertion type

[VOICE] → Voice selection → [F3] EFFECT ................................................................................................................................................... Page 151

[PERFORM] → Performance selection → [F3] EFFECT → [SF1] CONNECT ................................................................................................ Page 171

[SONG] or [PATTERN] → Song/Pattern selection→ [MIXING] → [F3] EFFECT → [SF1] CONNECT ............................................................. Page 189

Selecting a Master Effect type

[VOICE] → [UTILITY] → [F3] VOICE → [SF2] MEF ........................................................................................................................................ Page 206

[PERFORM] → Performance selection → [EDIT] → [COMMON] → [F2] OUT/MEF → [SF3] MEF ................................................................ Page 172

[SONG] or [PATTERN] → Song/Pattern selection→ [MIXING] → [EDIT] → [COMMON] → [F2] MEQ/MEF → [SF2] MEF ........................... Page 190

Selecting a Master EQ type

[VOICE] → [UTILITY] → [F3] VOICE → [SF1] MEQ ....................................................................................................................................... Page 206

[PERFORM] → Performance selection→ [EDIT] → [COMMON] → [F2] OUT/MEF → [SF2] MEQ ................................................................ Page 172

[SONG] or [PATTERN] → Song/Pattern selection→ [MIXING] → [EDIT] → [COMMON] → [F2] OUT/MEF → [SF1] MEQ ........................... Page 190

Using controllers

• Understanding the organization and structure of the controllers........................................................................................................Pages 50, 69

• Assigning functions to the controllers for each Voice (Controller Set) ...................................................................................................... Page 70

• Assigning Control Change numbers to each controller............................................................................................................................... Page 72

• Setting the Pitch Bend Range

[VOICE] → Voice selection→ [EDIT] → [COMMON] → [F1] GENERAL → [SF5] OTHER → PB Upper/PB Lower ....................................... Page 154

[SONG] or [PATTERN]

→

Song/Pattern selection

→

[MIXING]

→

[EDIT]

→

Part selection

→

[F1] VOICE

→

[SF5] OTHER

→

PB Upper/PB Lower

........ Page 191

• Checking the currently assigned parameters for knob control.......... Pages 56 (Voice mode), 65 (Performance mode), 96 (Song/Pattern mode)

• Checking the currently assigned parameters for Control sliders control .................................................................................................. Page 52

• Starting/stopping a Song or Pattern by pressing a Footswitch ............................... [UTILITY] → [F4] CTL ASN → [SF3] FT SW .......... Page 209

• Changing a Voice or a Performance by pressing a Footswitch ................................ [UTILITY] → [F4] CTL ASN → [SF3] FT SW .......... Page 209

•Turning Arpeggio playback on or off by pressing a Footswitch............................... [UTILITY] → [F4] CTL ASN → [SF3] FT SW .......... Page 209

•Keeping the effect of a controller (Modulation Wheel, etc.) the same, even when changing Voices

[UTILITY] → [F1] GENERAL → [SF4] OTHER → CtrlReset = hold ................................................................................................................. Page 206

Application Index

10

Owner’s Manual

Sounding only the speciﬁed Part or Voice

•Turning each element on or off in the Voice Edit mode.................................................................................................................................Page 55

• Determining whether each Element is used or not in the Voice Edit mode

[VOICE] → [EDIT] → Element selection → [F1] OSC → [SF1] WAVE → ElementSw = on/off ........................................................................Page 158

• Determining whether each Part is used or not in the Performance mode

[PERFORM] → Performance selection→ [EDIT] → Part selection → [F1] VOICE → [SF1] VOICE → PartSw = on/off ..................................Page 174

•Turning each track (Part) of a Song/Pattern on or off....................................................................................................................................Page 75

•Turning off or muting playback of a Song/Pattern Part, by setting the receive channel to off

[SONG] or [PATTERN]

→

Song/Pattern selection

→

[MIXING]

→

[EDIT]

→

part selection

→

[F1] VOICE

→

[SF2] MODE

→

ReceiveCh

............Page 191

Adjusting the volume or output level

• Overall

Adjusting the Master Volume output................................................................................................................ [MASTER VOLUME] .............Page 16

Adjusting the entire volume of the instrument’s internal tone generator block

..... [UTILITY] → [F1] GENERAL → [SF1] TG → Volume ...........Page 205

Adjusting the output gain of each Output connector........................................................................... [UTILITY] → [F2] OUTPUT ...........Page 206

• In the Voice mode

Adjusting the volume balance of the Elements of a Normal Voice with the Control sliders

[VOICE] → Normal Voice selection → [EDIT] → Element selection→ [F4] AMP → [SF1] LVL/PAN → Level ...................................................Page 56

Adjusting the entire volume for the selected Voice (common to all Elements/keys)

[VOICE] → Voice selection→ [EDIT] → [COMMON] → [F2] OUTPUT → Volume ..........................................................................................Page 154

• In the Performance mode

Adjusting the volume balance of the Parts of an edited Performance with the Control sliders

[PERFORM] → Performance selection → [EDIT] → Part selection → [F2] OUTPUT → [SF1] VOL/PAN → Volume .......................................Page 65

Adjusting the entire volume for the selected Performance (common to all Parts)

[PERFORM]→ Performance selection → [EDIT] → [COMMON] → [F2] OUT/MEQ → [SF1] OUT → Volume ...............................................Page 172

• In the Song mode/Pattern mode

Adjusting the volume balance of the Parts of an edited Song with the Control sliders

[SONG] or [PATTERN] → Song/Pattern selection → [MIXING] → Part Selection → [F1] VOL/PAN → VOLUME .............................................Page 97

Creating Data

• Creating a Voice

Creating a Normal Voice in the Voice Edit mode............................................................................................................................................Page 53

Creating a Drum Voice in the Voice Edit mode...............................................................................................................................................Page 57

Creating a Mixing Voice especially for a Song or Pattern .............................................................................................................................Page 78

• Creating a Performance....................................................................................................................................................................................Page 63

• Creating a Song

Recording your keyboard performance to a Song track (Realtime Recording)..........................................................................................Page 88

Recording over (replacing) existing material in a Song track—Punch-in Recording

[SONG] → [REC] → [F1] SETUP → Type = punch ...........................................................................................................................................Page 88

Recording additional material to an existing Song track (without erasing previous material)—Overdub Recording

[SONG] → [REC] → [F1] SETUP → Type = overdub ........................................................................................................................................Page 80

Sounding the metronome during recording............................ [SONG] → [UTILITY] → [F3] SEQ → [SF1] CLICK → Mode = rec ...........Page 206

Recording a Song by using a Performance ...................................................................................................................................................Page 89

Using the Step Recording function..................................................................... [SONG] → [REC] → [F1] SETUP → Type = step .............Page 80

Editing MIDI events for each track of an already-recorded Song ....................................... [SONG] → [EDIT] → Track selection .............Page 90

Inserting Tempo change information in the middle of the Song ............................................. [SONG] → [EDIT] → [F4] TR SEL .............Page 88

Inserting Voice change information

[SONG] → [EDIT] → Track selection → Inserting a Bank Select MSB/LSB and Program Change ................................................................Page 182

Editing Song Mixing settings, such as the volume of each Part................................................................. [SONG] → [MIXING] .............Page 93

Using convenient “Jobs,” such as Copy, Clear, Quantize ....................................................... [SONG] → [JOB] → Job selection .............Page 91

• Creating a Pattern

Assigning a Preset Phrase to each track of a Pattern (Patch function).......................................................................................................Page 78

Recording your keyboard performance to a Pattern track to create a Phrase............................................................................................Page 82

Recording a newly found Arpeggio rhythm pattern to a Pattern track........................................................................................................Page 80

Sounding the metronome during recording....................... [PATTERN] → [UTILITY] → [F3] SEQ → [SF1] CLICK → Mode = rec ...........Page 206

Using the Step Recording function................................................................ [PATTERN] → [REC] → [F1] SETUP → Type = step .............Page 83

Editing MIDI events for each track of an already-recorded Pattern................................ [PATTERN] → [EDIT] → Track selection .............Page 90

Editing Pattern Mixing settings, such as the volume of each Part.......................................................... [PATTERN] → [MIXING] .............Page 93

Using convenient “Jobs,” such as Copy, Clear, Quantize .................................................. [PATTERN] → [JOB] → Job selection .............Page 91

Programming a sequence of a Section to create a Pattern Chain ...................................................... [PATTERN] → [F6] CHAIN .............Page 85

Converting a Pattern Chain to Song data....................... [PATTERN] → Pattern selection → [F6] CHAIN → [EDIT] → [F3] SONG .............Page 86

• Creating a Master............................................................................................................................................................................................Page 122

• Creating an Arpeggio ......................................................................................................................................................................................Page 97

Application Index

11

Owner’s Manual

Storing/Saving the created data

•

Storing an edited Voice to internal memory (Flash ROM) and saving all the Voices in internal memory to a USB storage device

.......................... Page 60

• Storing an edited Performance to internal memory (Flash ROM) and saving all the Performances in internal memory to

a USB storage device ...................................................................................................................................................................................... Page 66

•Saving the Song/Pattern data

Storing Song Mixing/Pattern Mixing settings to internal memory (DRAM).........................................................................................Pages 77, 94

Storing the entire Song/Pattern data to a USB storage device.................................................................................................................... Page 98

• Storing Mixing settings to internal memory (Flash ROM) as a template.................................................................................................... Page 94

• Storing an edited Master to internal memory (Flash ROM) and saving all the Masters on internal memory to

a USB storage device ................................................................................................................................................................................... Page 123

•Saving all Arpeggios in internal memory (Flash ROM) to a USB storage device.................................................................................... Page 214

Naming your created data.............................................................................................................................................................. Page 38

Recovering lost data

Comparing the Voice, Performance, Song, or Pattern before editing with the just-edited one (Compare function) .............................. Page 36

Recalling an edited, but not-stored Voice, Performance, Song or Pattern (when another Voice has been selected)

—Recall function.............................................................................................................................................................................................. Page 37

• Song/Pattern

Canceling the changes made in the recent session such as Recording and Job to restore the data to its previous status

[SONG] or [PATTERN] → [JOB] → [F1] UNDO ................................................................................................................................................ Page 93

Initializing

• Resetting the User Memory to the Initial Factory Settings.......................................................................................................................... Page 26

• Formatting a USB storage device................................................................................................................................................................. Page 213

• Initializing the edited Voice................................................................................................................ [VOICE] → [JOB] → [F1] INIT .......... Page 168

• Initializing the edited Performance............................................................................................. [PERFORM] → [JOB] → [F1] INIT .......... Page 177

• Initializing the edited Master......................................................................................................... [MASTER] → [JOB] → [F1] INIT .......... Page 218

• Initializing the edited Song Mixing settings ................................................................ [SONG] → [MIXING] → [JOB] → [F1] INIT .......... Page 192

• Initializing the edited Pattern Mixing settings ........................................................ [PATTERN] → [MIXING] → [JOB] → [F1] INIT .......... Page 202

Pitch related settings (Tune, Note Shift, etc.)

• Overall

Changing the octave setting of the keyboard ............................................ [UTILITY] → [F1] GENERAL → [SF2] KBD → Octave ............ Page 29

Shifting the note up or down on the keyboard ..................................... [UTILITY] → [F1] GENERAL → [SF2] KBD → Transpose ............ Page 29

Shifting the note up or down in the tone generator block ........................ [UTILITY] → [F1] GENERAL → [SF1] TG → NoteShift .......... Page 205

Adjusting the tuning to other instruments........................................................ [UTILITY] → [F1] GENERAL → [SF1] TG → Tune .......... Page 205

• In the Voice mode

Setting the tuning system for the voice

[VOICE] → Voice selection → [EDIT] → [COMMON] → [F1] GENERAL → [SF2] PLY MODE → M.TuningNo. ....................................... Page 169

Adjusting the pitch for each Element of the edited Voice in semitones

[VOICE] → Voice selection→ [EDIT] → Element selection→ [F2] PITCH → [SF1] TUNE → Coarse ............................................................. Page 159

Finely adjusting the pitch for each Element of the edited Voice

[VOICE] → Voice selection→ [EDIT] → Element selection→ [F2] PITCH → [SF1] TUNE → Fine ................................................................. Page 159

Setting the all notes (keys) to the same pitch

[VOICE] → Voice selection→ [EDIT] → Element selection→ [F2] PITCH → [SF4] KEY FLW → PitchSens = 0 ............................................ Page 159

• In the Performance mode

Shifting the note up or down for each Part of the edited Performance

[PERFORM] → Performance selection → [EDIT] → Part selection → [F4] TONE → [SF1] TUNE → NoteShift ............................................ Page 176

Finely adjusting the pitch for each Part of the edited Performance

[PERFORM] → Performance selection → [EDIT] → Part selection → [F4] TONE → [SF1] TUNE → Detune ................................................ Page 176

• In the Song mode/Pattern mode

Shifting the note up or down for each Part of the current Song/Pattern

[SONG] or [PATTERN] → Song/Pattern selection → [MIXING] → [EDIT] → Part selection → [F4] TONE→ [SF1] TUNE → NoteShift ......... Page 191

Finely adjusting the pitch for each Part of the current Song/Pattern

[SONG] or [PATTERN] → Song/Pattern selection→ [MIXING] → [EDIT] → Part selection → [F4] TONE → [SF1] TUNE → Detune ....... Page 191

• In the Master mode

Shifting the keyboard octave up or down for each zone of the edited Master

[MASTER] → Master selection → [F2] MEMORY → ZoneSwitch = on → [EDIT] → Zone selection → [F2] NOTE → Octave ...................... Page 216

Finely adjusting the keyboard pitch for each zone of the edited Master

[MASTER] → Master selection→ [F2] MEMORY → ZoneSwitch = on → [EDIT] → Zone selection → [F2] NOTE → Transpose .................. Page 216

Application Index

12

Owner’s Manual

Connecting to a computer/external MIDI instrument

• Determining which connector (MIDI, USB TO HOST) is used for MIDI input/output

[UTILITY] → [F5] MIDI → [SF4] OTHER → MIDI IN/OUT ................................................................................................................................Page 210

• Using the sounds of the MO for Song playback from a MIDI sequencer...................................................................................................Page 110

• Setting whether or not Bulk Dump data can be received

[UTILITY] → [F5] MIDI → [SF2] SWITCH → RcvBulk = on/protect .................................................................................................................Page 209

• Sounding only the external MIDI tone generator and turning the internal tone generator off

[UTILITY] → [F5] MIDI → [SF2] SWITCH → LocalCtrl = off ............................................................................................................................Page 209

• Synchronizing with an external MIDI instrument/computer

Using the MO as a MIDI master

[UTILITY] → [F5] MIDI → [SF3] SYNC → MIDI Sync = internal, ClockOut = on, Seqctrl = out ...................................................................Page 210

Using the MO as a MIDI slave

[UTILITY] → [F5] MIDI → [SF3] SYNC → MIDI Sync = MIDI, ClockOut = off, Seqctrl = in .............................................................................Page 210

Using the MO as a MTC slave

[UTILITY] → [F5] MIDI → [SF3] SYNC → MIDI Sync = MTC, ClockOut = off, Seqctrl = in .............................................................................Page 210

• Disabling synchronization with the external MIDI instrument/computer

Maintaining normal playback on an external MIDI sequencer, even when starting/stopping Song/Pattern playback on the MO

[UTILITY] → [F5] MIDI → [SF3] SYNC → MIDI Sync = internal, Seqctrl = off ................................................................................... ...........Page 210

Maintaining normal Song/Pattern playback on the MO, even when starting/stopping playback on an external MIDI sequencer

[UTILITY] → [F5] MIDI → [SF3] SYNC → Seqctrl = off ...................................................................................................................... ...........Page 210

• Synchronizing the LFO wave speed of the Voice with an external MIDI instrument/computer

[UTILITY] → [F5] MIDI → [SF3] SYNC → MIDI Sync = MIDI ..........................................................................................................................Page 210

[VOICE] → Normal Voice selection → [EDIT] → [COMMON] → [F5] LFO → [SF1] WAVE → TempoSync = on ...........................................Page 156

• Setting which MIDI events will be transmitted or recognized via the MIDI and USB TO HOST connectors

[SONG] or [PATTERN] → [UTILITY] → [F3] SEQ → [SF2] FILTER ..................................................................................................................Page 207

• Setting the MIDI transmit channel

Setting the MIDI transmit channel of the keyboard in the Voice mode/Performance mode

[UTILITY] → [F5] MIDI → [SF1] CH → KBDTransCh .......................................................................................................................................Page 209

Setting the MIDI transmit channel and port for each track of a Song/Pattern

[SONG] or [PATTERN] → Song/Pattern selection → [F3] TRACK → [SF1] CHANNEL ...................................................................................Page 178

Setting the MIDI transmit channel of Arpeggio playback

[UTILITY] → [F3] VOICE → [SF3] ARP CH → TransmitCh ..............................................................................................................................Page 206

• Setting the MIDI receive channel

Setting the MIDI receive channel of the keyboard in the Voice mode/Performance mode

[UTILITY] → [F5] MIDI → [SF1] CH → BasicRcvCh ........................................................................................................................................Page 209

Setting the MIDI receive channel for each part of a Song/Pattern

[SONG] or [PATTERN]

→

Song/Pattern selection

→

[MIXING]

→

[EDIT]

→

Part selection

→

[F1] VOICE

→

[SF2] MODE

→

ReceiveCh

.............Page 191

• Setting parameters for Program Change transmission/recognition

Enabling or disabling the sending of Bank Select and Program Change messages, when selecting a Voice or Performance

[UTILITY] → [F5] MIDI → [SF2] SWITCH → BankSel, PgmChange ................................................................................................................Page 209

Enabling or disabling selection of MO Voices/Performances from an external MIDI device

[UTILITY] → [F5] MIDI → [SF2] SWITCH → BankSel, PgmChange ................................................................................................................Page 209

[SONG] or [PATTERN] → Song/Pattern selection → [MIXING] → [EDIT] → Part selection→ [F5] RCV SW → BankSel, PgmChange .........Page 192

Setting related parameters so that the MIDI messages produced by the Song/Pattern playback will not be transmitted via MIDI

[SONG] or [PATTERN] → [UTILITY] → [F3] SEQ → [SF2] FILTER ...............................................................................................................Page 207

• Setting whether each track playback sounds the internal tone generator or an external tone generator

[SONG] or [PATTERN] → Song/Pattern selection → [F3] TRACK → [SF2] OUT SW .....................................................................................Page 179

Other tips

• Loading the speciﬁed ﬁle on the USB storage device automatically when the power is turned on.......................................................Page 102

• Setting the Mode set automatically when the power is turned on

[UTILITY] → [F1] GENERAL → [SF4] OTHER → PowerOnMode ....................................................................................................................Page 206

Table of Contents

13

Owner’s Manual

Introduction ...............................................................6

Accessories...............................................................6

Main Features............................................................7

How to use this manual .............................................8

Application Index................................................... 9

The Controls & Connectors 14

Front Panel ..............................................................14

Rear Panel...............................................................18

Setting up and Playing 20

Power supply...........................................................20

Playing the keyboard ..............................................22

Modes .....................................................................24

Basic instructions ....................................................25

Resetting the User Memory to the Initial Factory

Settings ...................................................................26

Basic Operation 27

Modes .....................................................................27

About data storage to USB storage devices ..........30

Functions and Sub-Functions .................................33

Selecting a Program................................................33

Moving the Cursor and Setting Parameters ............35

About the editing functions .....................................36

Confirmation Message ............................................37

Information Display .................................................37

Note (Key) settings..................................................37

Naming....................................................................38

Quick Guide 40

Playing the MO..................................................... 40

Voice Play mode .....................................................40

Performance Play mode..........................................44

Using the Arpeggio feature.....................................48

Using the Controllers on the MO.............................50

Editing a Program................................................ 53

Editing a Voice ........................................................53

Editing a Performance.............................................63

Using the Controllers—Advanced Course ........ 69

Controllers supported by the MO............................69

Creating a Song on the MO................................. 73

Playing the Demo Songs/Patterns...........................73

Creating a Pattern ...................................................76

Creating a Song ......................................................87

Connecting the MO to external devices ...........103

Connections ......................................................... 103

Using as a Multi-timbral Tone Generator for your

DAW/sequencer ................................................... 110

Using the MO with computer software ................. 112

Creating Your Original Program Set

(Master mode) .....................................................122

Basic Structure 128

Internal Structure (System Overview)................... 128

Internal Memory and File Management................ 148

Reference 151

Voice mode........................................................... 151

Performance mode............................................... 171

Song mode ........................................................... 178

Pattern mode ........................................................ 196

Mixing Voice mode............................................... 203

Utility mode........................................................... 205

File mode.............................................................. 211

Master mode......................................................... 215

Appendix 219

Information Displays............................................. 219

Display Messages ................................................ 221

About MIDI............................................................ 223

Troubleshooting.................................................... 227

Specifications ....................................................... 231

Index..................................................................... 232

Table of Contents

Front Panel

14

Owner’s Manual

The Controls & Connectors

Front Panel

ASSIGN A

PAN

CUTOFF

SWING

LOW

ASSIGN B

REVERB

RESONANCE

GATE TIME

LOW MID

ASSIGN 1

CHORUS

ATTA CK

VELOCITY

HIGH MID

ASSIGN 2

TEMPO

RELEASE

UNIT MULTIPLY

HIGH

DAW REMOTE PAGE SELECT

PAN SEND

TONE

ARP FX

OCTAVE

MASTER

VOLUME

ZONE 1 ZONE 2 ZONE 3 ZONE 4

EQ

DOWN

MASTER

EFFECT

VOICE PERFORM MASTER

SONG PATTERN MIXING

FA

V

DAW

REMOTE

EDIT

COMPARE SCENE STORE

FILE

JOB

UTILITY

DEMO

STORE

LOCATE

REC

F1 F2 F3 F4 F5 F6

12

EFFECT

BYPASS

UP

ASSIGN

MEF

SF1

SCENE

SF2 SF3 SF4 SF5 INFORMATION

EFFECT ARPEGGIO

MODE

SEQ TRANSPORT

ARPEGGIO

ON OFF

DEC NO INC YES

EXIT ENTER

EXECUTE

PHONES OUTPUT DIGITAL OUT

FOOT

CONTROLLER

FOOT

SWITCH

L MONO R

MIDI TO HOST TO DEVICE

IN OUT THRU

USB

C1 D1 E1 F1 G1 A1 B1 C2 C3 C4

SET LOCATE

C

O

ASSIGN A

PAN

CUTOFF

SWING

LOW

ASSIGN B

REVERB

RESONANCE

GATE TIME

LOW MID

ASSIGN 1

CHORUS

ATTA CK

VELOCITY

HIGH MID

ASSIGN 2

TEMPO

RELEASE

UNIT MULTIPLY

HIGH

DAW REMOTE PAGE SELECT

PAN SEND

TONE

ARP FX

MASTER

VOLUME

ZONE 1 ZONE 2 ZONE 3 ZONE 4

EQ

MASTER

EFFECT

LOCATE

REC

12

EFFECT

BYPASS

ASSIGN

MEF

EFFECT ARPEGGIO

SEQ TRANSPORT

ARPEGGIO

ON OFF

F1

SCENE

PHONES OUTPUT DIGITAL OUT

L MONO

FOOT

CONTROLLER

FOOT

SWITCH

R

C0 D0B-1A-1 E0 F0 G0 A0 B0 C1 C2 C3

MIDI

TO HOST TO DEVICE

IN OUT THRU

USB

1

34

5 7

9)

6

%^ &™ £

2

#

$

º*(

!

¡

@

9)

8

5

6

^

7

!

MO6

n When both of the [OCTAVE] buttons are turned off, each key corresponds to the note name shown in the

illustrations. Refer to this illustration when setting parameters having note name values, such as Note Limit.

n When [UTILITY] → [F1] GENERAL → [SF2] KBD → Octave is set to “0,” each key corresponds to the note name shown in the

illustrations. Refer to this illustration when setting a note name of a parameter like Note Limit.

MO8

The Controls

& Connectors

Front Panel

15

Owner’s Manual

PRE 1

A. PIANOFAVORITES

PRE 2

KEYBOARD

PRE 3

ORGAN

PRE 4 USER 1

BASS

USER 2

STRINGS

GM

BRASS

–

CATEGORY

SEARCH

TRACK

SELECT

DRUM

KITS

SOLO

SECTION

MUTE

EDIT

COMPARE SCENE STORE

SET LOCATE

COMMON

FILE

JOB

UTILITY

DEMO

STORE

F1 F2 F3 F4 F5 F6

SF1 SF2 SF3 SF4 SF5 INFORMATION

MODE

DEC NO INC YES

EXIT ENTER

EXECUTE

GUITAR

PLUCKED

REED PIPE

ABCDEFGH

12345678

910111213141516

SYN LEAD SYN PAD

CHOIR

SYN COMP

DRUM

PERCUSSION

SE MUSICAL FX COMBI

CHROMATIC

PERCUSSION

ELEMENT PERF. PART ZONE

C4 C5 C6 C7

DC IN STANDBY

ON

ª

•

‚

∞

§

ª

•

‚

∞

#

@8

&™ ¡ §£%

º* (

¶ ¢

Front Panel

16

Owner’s Manual

The Controls

& Connectors

1 Keyboard

The MO6 features a 61-key keyboard, while the MO8 has

88 keys.

All are equipped with an initial touch feature. With initial

touch, the instrument senses how strongly or softly you

play the keys, and uses that playing strength to affect the

sound in various ways, depending on the selected voice.

2 OCTAVE [UP] and [DOWN] buttons Page 29

Use these buttons to change the note range of the

keyboard. To restore the normal octave setting, press both

buttons simultaneously.

n Because of its extended keyboard, the MO8 does not have

OCTAVE buttons.

3 Pitch bend wheel Page 50

Controls the pitch bend effect. You can also assign other

functions to this controller.

4 Modulation wheel Page 50

Controls the modulation effect. You can also assign other

functions to this controller.

5 [MASTER VOLUME] slider

Adjusts the volume of the overall sound, as output from the

rear-panel OUTPUT L/MONO and R jacks as well as the

PHONES jack.

6 Four Knob Control Function buttons and four

Knobs Page 51

These four highly versatile knobs let you adjust various

aspects or parameters of the current Voice. Use the Knob

Control Function buttons to change the parameter set for

the knobs. The corresponding LED lights to indicate which

group of parameters are active.

7 Control slider Page 52

These sliders control the volume of four elements which

make up a Normal Voice in the Voice mode, the volume of

four parts in the Performance mode, the volume of four

parts including the current part in the Song mode/Pattern

mode, and the volume of four zones in the Master mode.

n If all of the Control sliders are set to the minimum, you may not

hear any sound from the instrument, even when playing the

keyboard or a Song/Pattern. If this is the case, raise all the

sliders to a suitable level.

n The [MASTER VOLUME] slider adjusts the output level from

this instrument. On the other hand, the Control sliders adjust

the MIDI volume value for the corresponding element or part.

8 DAW REMOTE button Page 113

The Remote mode lets you control sequencer software on

your computer from the panel controls of the instrument.

Turn the [DAW REMOTE] button on to enter the Remote

mode.

9 [MASTER EFFECT] button and

[EFFECT BYPASS] button Page 140

The extensive effect section of the instrument provides

Insertion effects (three sets, with two effect units per set),

System effects (Reverb and Chorus), and Master effects.

The effects can be applied to the keyboard-played voices

and to Song/Pattern playback. These buttons enable you

to turn the corresponding Effect blocks (as printed on the

panel) on or off with a single touch.

n From the following display, you can select the speciﬁc

effect(s) to be bypassed when using the [EFFECT

BYPASS] button. [UTILITY] → [F1] GENERAL → [SF3] EF

BYPS display

) [ARPEGGIO ON/OFF] button Page 48

Press this button to enable or disable playback of the

Arpeggio for each Voice, Performance, Song, or Pattern. If

the Arpeggio Switch of the selected part is set to off in the

Performance/Song/Pattern mode, however, pressing this

button has no effect.

! SEQ TRANSPORT buttons

These buttons control recording and playback of the Song/

Pattern sequence data.

[] (Top) button

Instantly returns to the beginning of the current Song or

Pattern (i.e., the ﬁrst beat of the ﬁrst measure).

[] (Reverse) button

Press brieﬂy to move back one measure at a time, or hold

to continuously rewind.

[] (Forward) button

Press brieﬂy to move forward one measure at a time, or

hold to continuously fast-forward.

[REC] (Record) button

Press this to enable recording (Song or Pattern phrase).

(The indicator lights.)

[] (Stop) button

Press to stop recording or playback.

[] (Play) button

Press to start playback from the current point in the Song

or Pattern. During recording and playback, the indicator

ﬂashes at the current tempo.

@ MODE buttons Page 24

These buttons select the operating modes (e.g., Voice

mode).

# LCD Display

The large backlit LCD displays the parameters and values

related to the currently selected operation or mode.

$ LCD Contrast Control Page 21

Use this control to set the LCD display for optimum

legibility.

% [F1] – [F6] (Function) buttons Page 33

These buttons located directly below the LCD display call

up the corresponding functions indicated in the display. In

the display hierarchy, these functions [F] rank just below

the modes.

^ [SF1] – [SF5] (Sub Function) buttons Page 33

These buttons located directly below the LCD display call

up the corresponding sub functions indicated in the

display. In the display hierarchy, these sub functions [SF]

rank just below the functions [F].

These buttons can be also used to store/recall the

Arpeggio type in each Play mode and Song/Pattern

Record mode. They can be also used to store/recall the

Song Scene (page 89) in the Song Play and Song Record

modes.

Front Panel

17

Owner’s Manual

The Controls

& Connectors

& [INFORMATION] button Page 37

For calling up a special “help” feature that shows

information about the currently selected mode. You can go

back to the previous display by pressing this button again

or pressing any other button.

Depending on the selected display, this button may be

used to call up a window for inputting characters, for

inputting numbers, for selecting note lengths, or for

selecting keys or note names (page 35).

* Data dial Page 35

For editing the currently selected parameter. To increase

the value, turn the dial right (clockwise); to decrease the

value, turn the dial left (counter-clockwise). If a parameter

with a wide value range is selected, you can change the

value in broader strokes by quickly turning the dial.

( [INC/YES] button Page 35

For increasing the value of the currently selected

parameter. Also use it to actually execute a Job or a Store

operation.

º [DEC/NO] button Page 35

For decreasing the value of the currently selected

parameter. Also use it to cancel a Job or a Store operation.

n You can also use the [INC/YES] and [DEC/NO] buttons to

quickly move through parameter values in 10-unit jumps,

especially those with large ranges. Simply hold down one of

the buttons (of the direction you want to jump), and

simultaneously press the other. For example, to jump in the

positive direction, hold down the [INC/YES] button and press

[DEC/NO].

¡ Cursor buttons Page 35

The cursor buttons move the “cursor” around the LCD

display screen, highlighting and selecting the various

parameters.

™ [EXIT] button Page 28

The menus and displays of this synthesizer are organized

according to a hierarchical structure.

Press this button to exit from the current display and return

to the previous level in the hierarchy.

£ [ENTER] button

Use this button to execute a Job or a Store operation. Also

use this button to actually enter a number when selecting a

Memory or Bank for Voice or Performance. In the File

mode, use this button to go to the next lowest level in the

selected directory.

¢ Bank buttons Page 40

Each button selects a Voice or Performance Bank.

When the [CATEGORY SEARCH] button is turned on,

these buttons can be used to select the desired category

(printed below each button). When the [SECTION] button

is turned on in the Pattern mode, these buttons are used to

select the desired section.

∞ Group [A] – [H] buttons Page 41

Each button selects a Voice or Performance Group.

When the [CATEGORY SEARCH] button is turned on,

these buttons can be used to select the desired category

(printed below each button). When the [SECTION] button

is turned on in the Pattern mode, these buttons are used to

select the desired section.

§ Number [1] – [16] buttons

Use of these buttons differs depending on the on/off status

of the [TRACK SELECT] and [MUTE] buttons.

¶ [CATEGORY SEARCH] button Page 42

When this button is turned on, the Bank buttons and the

Group buttons can be used to select the Voice/

Performance category.

• [SECTION] button Page 73

When this button is turned on in the Pattern mode, the

Group [A] – [H] buttons can be used to select Pattern

Sections A – H and the [PRE1] – [–] buttons of the Bank

buttons can be used to select Pattern Sections I – P.

ª [TRACK SELECT] button Page 76

Tur ning this button on in the Song/Pattern mode enables

the Number [1] – [16] buttons for selecting corresponding

Song/Pattern tracks. The on/off status of this button affects

the Number [1] – [16] buttons in different ways, depending

on the selected mode. (See § “Number [1] – [16] buttons”

above.)

‚ [MUTE] button Page 74

Tur ning this button on in the Song/Pattern mode enables

the Number [1] – [16] buttons for muting corresponding

Song/Pattern tracks.

Press one of the Number [1] – [16] buttons while holding

this button to solo the corresponding track of the current

selected Song/Pattern.

The on/off status of this button affects the Number [1] –

[16] buttons in different ways, depending on the selected

mode. (See § “Number [1] – [16] buttons” above.)

Functions of the Number [1] – [16] buttons

When [TRACK

SELECT] is on

When [MUTE]

is on

When both

[TRACK SELECT]

[MUTE] are off

Voice Play mode

Keyboard

transmit channel

setting

—

Voice selection,

according to Groups

A – H

Voice Edit mode

Element selection (1 – 4) and

Element Mute setting (9 – 12)

—

Performance

Play mode

Keyboard

transmit channel

setting

Performance part

Mute setting

(1 – 4)

Performance or

Voice selection

(if cursor is located

at Voice name),

according to Groups

A – H

Performance

Edit mode

Performance part

selection (1 – 4)

Master Play

mode

Keyboard transmit

channel setting

(when memorizing

the Voice mode or

Performance

mode to the

current Master) or

Song/Pattern track

selection (when

memorizing the

Song mode or

Pattern mode to

the current

Master)

—

Master selection,

according to Groups

A – H

Master Edit

mode

Zone selection

(1 – 4)

——

Song/Pattern

Play mode

Song/Pattern

track selection

Song/Pattern

track Mute

setting

Song/Pattern

selection, according

to Groups A – H

Song/Pattern

Mixing mode

Song/Pattern part

selection

Song/Pattern part

Mute setting

Mixing Voice

Edit mode

Element selection (1 – 4) and

Element Mute setting (9 – 12)

—

Rear Panel

18

Owner’s Manual

The Controls

& Connectors

Rear Panel

1 STANDBY/ON switch Page 20

Press to turn power ON or OFF.

2 DC IN terminal Page 20

Connect the AC adaptor to this terminal.

Do not attempt to use an AC adaptor other than the Yamaha PA-5D or an

equivalent recommended by Yamaha. The use of an incompatible

adaptor may cause irreparable damage to the MO, and may even pose a

serious shock hazard!

ALWAYS UNPLUG THE AC ADAPTOR FROM THE AC POWER OUTLET

WHEN THE MO IS NOT IN USE.

3 Cable clip

Wrap the DC output cable of the adaptor around the cable

clip (as shown below) to prevent accidental unplugging of

the cable during operation.

4 USB connectors

This instrument is equipped with two types of USB

connectors on the rear panel—USB TO HOST and USB TO

DEVICE. The USB TO HOST connector is used to connect

this instrument to the computer via the USB cable. The

USB connection between the instrument and the computer

can only be used for transfer of MIDI data. No audio data

can be transferred via USB. The USB TO DEVICE

connector is used to connect this instrument to a USB

storage device (hard disk drive, CD-ROM drive, MO drive,

ﬂash disk, etc.) via the USB cable. This lets you save the

data created on this instrument to the external USB

storage device and load the data from the external USB

storage device to the instrument. Save/Load operations

can be performed in the File mode.

n For details about USB, see page 31.

5 MIDI IN/OUT/THRU connectors Page 104

MIDI IN is for receiving control or performance data from

another MIDI device, such as an external sequencer.

MIDI THRU is simply for redirecting any received MIDI

data (via MIDI IN) to connected devices, allowing

convenient chaining of additional MIDI instruments.

MIDI OUT is for transmitting all control, performance

and playback data from the MO to another MIDI device,

such as an external sequencer.

TO DEVICE TO HOST

MIDI

THRU OUT IN

USB

DC IN

STANDBY

ON

DC IN

STANDBY

ON

1

4 5

1 32

32

MO6

MO8

WARNING

DC IN

STANDBY

ON

USB

USB is an abbreviation for Universal Serial Bus. It is a serial

interface for connecting a computer with peripheral

devices, and enables much faster data transfer compared

to conventional serial port connections.

Rear Panel

19

Owner’s Manual

The Controls

& Connectors

6 FOOT SWITCH jack Page 69

For connection of optional FC4 or FC5 Footswitch.

7 FOOT CONTROLLER jack Page 69

For connection of an optional foot controller (FC7, etc.).

The FOOT CONTROLLER jack lets you continuously

control one of various different assignable functions—such

as volume, tone, pitch, or other aspects of the sound.

8 OUTPUT L/MONO and R jacks Page 20

Line level audio signals are output via these phone jacks.

For monophonic output, use just the L/MONO jack.

9 PHONES jack Page 20

For connection to a pair of stereo headphones.

) DIGITAL OUT connector Page 103

Use this connector to input or output digital signals over

coaxial (RCA-pin) cable. The format is S/PDIF, normally

used for CD and DAT players. The digital signal output is

44.1kHz/24-bit.

DIGITAL OUT

FOOT

CONTROLLER

FOOT

SWITCH

PHONESOUTPUT

R

L MONO

MIDI

THRU OUT IN

USB

TO DEVICE TO HOST

DIGITAL OUT

FOOT

CONTROLLER

FOOT

SWITCH

PHONESOUTPUT

RL MONO

6 7 ) 98

4567

98)

Setting up

and Playing

Power supply

20

Owner’s Manual

Setting up and Playing

Power supply

Power supply connections

Before you connect the power adapter, make sure that the MO [STANDBY/ON] switch is set to STANDBY

(Off).

1 Connect the plug of the power adapter PA-5D to the DC IN terminal on the rear panel of the MO.

2 Plug in the AC cable to an appropriate AC outlet.

n Follow this procedure in reverse order to disconnect the power adapter.

• Be sure to use the included adapter. Using an AC adapter other than the PA-5D may cause damage to the MO, and may even

pose a serious electrical shock hazard.

• Connect the adapter to an AC outlet of the speciﬁed voltage.

Even when the [STANDBY/ON] switch is in the STANDBY position, a small amount of electricity is still ﬂowing to the unit. When

you do not plan to use the MO for an extended period of time, be sure to unplug the AC power adapter from the AC outlet.

Connecting the speakers or pair of headphones

Since the MO has no built-in speakers, you will need to monitor the sound of the instrument by using

external equipment. Connect a set of headphones, powered speakers, or other playback equipment as

required.

DC IN

STANDBY

ON

Rear panel

1

AC cable

Power adapter

PA-5D

2 To electrical outlet

WARNING

CAUTION

MO

Powered speaker (Left)

Powered speaker (Right)

Headphones

OUTPUT L/MONO

OUTPUT R

PHONES

La pagina sta caricando ...

Yamaha MO8 Manuale del proprietario

Questo manuale è adatto anche per

Yamaha MO8 Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti