Gold Note PH-1000 Manuale utente

USER

MANUAL

PH-1000

PH-1000 LINE

EN

DE

IT

Thank you for purchasing one of our units

and welcome into the Gold Note world,

where we turn High-End audio and music

into a new experience.

Maurizio Aterini,

founder of Gold Note

EN

DE

IT

|

IMPORTANT SAFETY

| INFORMATIONS

the third prong are provided for your safety.

If the provided plug does not fit into

your outlet, consult an electrician for

replacement of the obsolete outlet. or

pinched particularly at plugs, convenience

receptacles, and the point where they exit

from the apparatus.

|Only use attachments/accessories specied

by the manufacturer.

|Use only with the cart, stand, tripod,

bracket, or table specied by the

manufacturer, or sold with the apparatus.

When a cart is used, use caution when

moving the cart/apparatus combination to

avoid injury from tip-over.

|Unplug this apparatus during lightning

storms or when unused for long periods

of time. Refer all servicing to qualied

service personnel only. Servicing is required

when the apparatus has been damaged in

any way (such as when the power cord or

plug is damaged, liquid has been spilled

or objects have fallen into the apparatus,

the apparatus has been exposed to rain

or moisture) and in any case when the

apparatus does not operate normally or

has been dropped.

PLEASE NOTE

1 Do not disassemble any part of the

product.

2 Do not use any part of the product for

other purposes.

3 For service and problems of any kind,

contact qualified Gold Note personnel.

4 Protect the product from rain, humidity

and keep away from heat sources, electric

and electronic motors etc. The power

cord supplied must be used only on this

unit.

5 Gold Note does not have responsibility

for any improper use of this unit.

GENERIC INFORMATION

|Read these instructions and store them.

|Heed all warnings.

|Follow the instructions.

|Do not use this apparatus near water.

|Clean only with a dry cloth.

|Do not block the ventilation openings

and install in accordance with the

manufacturer’s instructions.

|Do not install near heat sources such as

radiators, heat registers, stoves or other

apparatus (including ampliers) that

produce heat.

|Do not defeat the safety purpose of

the polarised or grounding-type plug: a

polarised plug hastwo blades with one

wider than the other.

|A grounding type plug has two blades and

a third grounding prong. The wide blade or

This appliance has a serial number located on the rear panel.

Please record the model and serial number and retain them for your records.

MODEL

SERIAL NUMBER

CAUTION!

To reduce the risk of electric shock, do not

remove cover (or back). No user-serviceable

parts inside. Refer only to qualified Gold

Note service personnel for service.

WARNING!

To prevent fire or shock hazard, do not

expose this appliance to rain or moisture.

GOLD NOTE - Information on the correct management of waste from

household Equipment pursuant to the European Directive 2012/19/EU

The crossed-out wheelie bin symbol shown on the equipment or its packaging indicates

that the product, at the end of its useful life, must be collected separately from other waste

to allow its proper treatment and recycling. The user must therefore deliver, free of charge,

the end-of-life equipment to the centres for the separate collection of waste electrical and

electronic equipment, or return it to the dealer in accordance with the procedures established

by the legislation.

The appropriate separate collection of discarded equipment allows for proper recycling,

treatment and environmentally compatible disposal, helping to avoid the possible dispersion

of hazardous substances and negative effects on the environment and health, favouring

the reuse and/or recycling of the materials of which the equipment is composed of. Illegal

dumping of the product by the user involves the application of administrative sanction

provided for by the legislation in force. We invite you consult the current legislation and the

measures adopted by the public service operating in your country or territory.

EN

DE

IT

EN

DE

IT

| INDEX

| PACKAGE CONTENT

INTRODUCTION AND FEATURES 1

TECHNICAL SPECIFICATIONS 3

FRONT PANEL 5

REAR PANEL 6

SELECT FUNCTIONS 7

DISPLAY OVERVIEW 8

LINE PREAMPLIFIER 10

EQ CURVES 11

SETTINGS, FACTORY RESET AND FIRMWARE VERSION 13

REMOTE CONTROL 14

FIRMWARE UPDATE 15

PRODUCT REGISTRATION 15

TROUBLESHOOTING 16

RELATED PRODUCTS 18

1x

PH-1000

1x

POWER

CABLE

1x

USER

MANUAL

1x

REMOTE

CONTROL

1

THE MOST ADVANCED

PHONO STAGE

The PH-1000 is simply the best phono stage

we have ever created, a unique piece of

audio engineering designed to be innovative

in every possible way and 100% made in

Italy. Featuring class A exclusive discrete

components, class A headphone output,

+40 EQ curves, manually adjustable custom

EQ curves, and the high-quality class A line

preamp which comes as an optional on the

PH-1000 LINE. For the first time ever, you

will be able to play virtually any record the

way it’s meant to be thanks to more than 40

EQ curves available, or even customise the

EQ curves manually by adjusting three main

parameters - that’s why the PH-1000 is a

complete game-changer, opening a new era

in vinyl reproduction.

PERFECT CARTRIDGE MATCHING

With 14 options to adjust the gain, 12 for the

load and 6 for the capacitance it is the ideal

phono stage for high-performance analogue

systems, capable of driving even the most

exotic of cartridges with perfect synergy,

making the PH-1000 a versatile tool even for

high-end recording studios.

On top of that, you can change settings

and make ultra-fine adjustments, including

the EQ curve, on the go by simply using

the SKC and the display as you are playing

music. Our innovative technology allows

the best ease of use while preserving

entirely the sound quality as it works in the

analogue domain: the interface is digital and

independent from the audio path, which is

completely analogue. The result is an ultra-

low noise phono stage with high gain and no

audio filters.

All the functionalities are in fact managed

through discrete audio-grade components

and sealed single switches, always

shortening the signal path to deliver superior

audio quality and extract even the finest

details from the vinyl record. Powered by our

custom firmware, the PH-1000 can be easily

updated via computer when necessary.

MAXIMUM FLEXIBILITY

The PH-1000 offers 3 independent inputs,

two RCA and one XLR. There are also 2

other inputs, one RCA and one XLR, that

can be used either for the external load

plugs for even finer control of the load or as

line inputs on the PH-1000 LINE. Add the

other functionalities, such as the headphone

output, the Stereo/Mono control with phase

inversion, the L/R channel swap and the

rumble infrasonic filter and here you have

it, the most advanced phono stage on the

market.

HIGH-QUALITY COMPONENTS

The level of quality meets the highest

standard throughout the entire production:

from the aluminium ultra-solid chassis

machined with precision to the electronic

components and circuitry that undergo strict

QC computer-controlled tests.

TOTAL CONTROL

The PH-1000 shows every detail on the

colour display powered by our proprietary

firmware. With the SKC [Single Knob Control

technology] and the display, you have an

intuitive system to easily control the phono

stage and quickly make fine-adjustments

without even interrupting the playback.

| INTRODUCTION AND FEATURES

2

EN

DE

IT

+40 EQ CURVES

RIAA, Capitol, Columbia/CBS, Deutsche

Grammophon, Decca London USA, Decca

London UK and Decca Mono 78rpm,

Epic, HMW, Mercury, RCA Victor, Philips,

Elektra, L’Oiseau-Lyre, Parlophone, and

more. Each curve can be “enhanced” with

our proprietary technology inspired by the

Neumann Pole to extend the frequency

response up to 50kHz.

HEADPHONE OUTPUT

You can now enjoy the shortest audio path

ever with the PH-1000, your turntable and

your headphones - that’s all you need for the

audio signal to go from the vinyl directly into

your headphones without the need of any

additional stages.

MODULAR DESIGN

For the most demanding audiophiles, the

PH-1000 can also be further enhanced with

our external power supply PSU-1250 and

PSU-1000, or even the external tube output

stage TUBE-1012 and TUBE-1006, to reach

the highest level of musical realism in terms

of dynamic, details, and imaging.

3

MAIN FEATURES

|Frequency response:

20Hz – 20kHz

|18 EQ curves, 4 custom curves all with

Enhanced option @ +/- 0.3dB max.

|THD (Total Harmonic Distortion):

<0.01% max

|Signal to noise ratio:

100dB

|Dynamic range:

110dB

|Output impedance:

Unbalanced 100Ω

Balanced 300Ω

|Infrasonic lter:

10Hz/36dB octave (ON/OFF)

|Mono/Stereo:

Stereo, Stereo 180°, Mono, Mono 180°

|Channel Swapping:

R/L, L/R

|IR receiver for multifunctional remote

control

EQ CURVES

|18 EQ Curve presets dedicated to Stereo,

Mono and 78rpm records, or Flat.

|4 manually adjustable EQ Curve setups

|Enhanced option ON/OFF (Neumann Pole)

| TECHNICAL SPECIFICATIONS

AUDIO OUTPUTS

|1x RCA

|1x XLR

|1x Tube Output (for the TUBE-1012 and

TUBE-1006 external stages)

|Output level:

2 Vrms standard up to 2,5 Vrms max

AUDIO INPUTS

|2x RCA (0.1mV MC up to 8.0mV MM)

|1x XLR (0.1mV up to 1.0mV MC)

|Line input level:

2 Vrms standard up to 2,5 Vrms max

RCA IN 1: PHONO stereo unbalanced

RCA IN 2: PHONO stereo unbalanced

RCA IN 3: EXTERNAL LOAD/LINE stereo

unbalanced (external load for ne

adjustment applied for RCA 2 only,

or line)

XLR IN 1: PHONO stereo balanced

(MC only)

XLR IN 2: EXTERNAL LOAD/LINE stereo

balanced (external load for ne

adjustment or line)

LOAD

|RCA - 12 options:

100kΩ, 75kΩ, 47kΩ, 33kΩ, 22kΩ, 1kΩ,

470Ω, 220Ω, 100Ω, 47Ω, 22Ω,10Ω

+ external load (EXT)

|XLR - 8 options:

4k7Ω, 1kΩ, 470Ω, 220Ω, 100Ω, 47Ω,

22Ω,10Ω

+ external load (EXT)

4

EN

DE

IT

CAPACITANCE

|7 options:

OFF, 100pF, 150pF, 220pF, 330pF, 470pF,

1000pF

GAIN

|40dB MM to 65dB MC with 7 options:

0dB, ± 3dB, ± 6dB, ± 9dB

POWER

|Power supply:

Dual-Mono linear power supply

100-240V with auto sense, 50-60Hz

|Power consumption:

30W

|PSU Input for external power supply

PSU-1250 and PSU-1000

|Fuse:

2A F

DIMENSIONS AND WEIGHT

Dimensions:

430mm W | 135mm H | 375mm D

630mm W | 350mm H | 600mm D - boxed

Weight:

Kg. 12 - net

Kg. 17 - boxed

UPGRADES

|PSU-1250 & PSU-1000 external power

supplies

|TUBE-1012 & TUBE-1006 valve output

stages

RUMBLE FILTER

When activated, the infrasonic filter reduces

distortion at low frequencies and prevents

uncontrolled vibrations of the drivers.

CLASS-A PREAMP LINE STAGE

The PH-1000 optionally comes with a pure

class A preamp stage, turning 1 RCA and 1

XLR into line stage inputs to be used with

other audio sources for maximum versatility.

5

12

3

54

FRONT PANEL OVERVIEW

The PH-1000 shows all the functions on the

colour display powered by our proprietary

firmware. With the SKC [Single Knob Control

technology] and the display, you have an

intuitive system to easily control the phono

stage and quickly make fine-adjustments

without even interrupting the playback.

| FRONT PANEL

3Headphone output

4Display

2IR

5SKC (Single Knob Control)

1LED status light LED status light:

Red = standby

Blue = on

Green = powered by the external power

supply PSU-1250/1000

6

EN

DE

IT

SERIAL NUMBER:

14

13

12

9

11

10

567 8

1 2 3 4

REAR PANEL OVERVIEW

The PH-1000 offers 3 independent inputs,

two RCA and one XLR. There are also 2

other inputs (one RCA and one XLR) that can

be used either for the external load plugs

for even finer control of the Load or as line

inputs on the PH-1000 with Preamp.

| REAR PANEL

EXTERNAL LOAD

To use the external load on the RCA inputs,

ensure to connect your turntable to RCA 2

and the external load to RCA 3.

To use the external load with the XLR input,

ensure to connect your turntable to XLR 1

and the external load to XLR 2.

POWER AND OTHERSANALOGUE INPUTS

3RCA 3 and GND 3

(line or external load)

ANALOGUE OUTPUTS

7XLR Line

2RCA 2 Phono and GND 2

8Tube

4XLR 1 Phono (MC only)

5XLR 2 (line or external load)

6RCA Line

1RCA 1 Phono and GND 1 9USB-Mini (for firmware

updates only)

11 Master switch ON/OFF

13 IR

14 AC plug IEC standard

10 PSU IN

12 RS IN

7

SERIAL NUMBER:

TURNING THE PH-1000 ON/OFF

Turn on the Master Switch on the rear panel

to power the PH-1000, the status LED is red

when in standby. Push the SKC (Single Knob

Control) for three seconds to switch on the

PH-1000 and the status LED will turn blue.

| SELECT FUNCTIONS

Master switch

HOW TO SELECT THE FUNCTIONS

1 Press the knob once to activate the

SELECTION FRAME.

2 Turn the knob left or right until the

desired function is highlighted in white

then press the knob to select it.

3 The frame will turn red: now you can turn

the knob to change the function.

4 Press the knob again when the desired

value is set to confirm and exit the

selection.

Rear panel Front panel

Push once

3 seconds push

Turn left or

right to browse

the menu

EN

DE

IT

CARTRIDGE SETTINGS

The PH-1000 shows all the settings on the

display - there are a number of features

that you can adjust to perfectly match your

cartridge and get the best out of your

records.

You can select the type of cartridge (MM or

MC), the gain, the load and the capacitance.

| DISPLAY OVERVIEW

Cartridge

MM

MC

Not for RCA 3 and

XLR 2

Gain

0

±3dB

±6dB

±9dB

Not for RCA 3 and

XLR 2

8

Load on RCA input

Not for RCA 3

100kΩ

75kΩ

47kΩ

33kΩ

22kΩ

1kΩ

470Ω

220Ω

100Ω

47Ω

22Ω

10Ω

EXT

Load on XLR input

Not for XLR 2

4k7Ω

1kΩ

470Ω

220Ω

100Ω

47Ω

22Ω

10Ω

EXT

Capacitance

Not for RCA 3 and

XLR 2

OFF

100pF

150pF

220pF

330pF

470pF

1000pF

EXTERNAL LOAD ON PH-1000

The external load for the RCA inputs is taken

from RCA 3 and applied to RCA 2 only. For

the XLR input, it’s taken from XLR 2. On the

PH-1000 LINE model, RCA 3 and XLR 2 can

also be used as line inputs. To activate the

external load, adjust the LOAD rotating

the knob until EXT (standing for External

Load) is selected. A warning message will

be displayed to ensure you have no audio

sources connected to the inputs used for

the external load and prevent accidental

damages to your system. Press SAVE to

conrm and continue.

9

SETTINGS AND FEATURES

The other settings are dedicated to the

features of the PH-1000. You can change

inputs (RCA 3 and XLR 2 are available

only on the PH-1000 LINE), swap the L-R

channels, turn ON/OFF the infrasonic filter,

and select the Mono or Stereo mode. You

can also adjust the brightness of the display.

When DISP is set to OFF, turn or press the

knob to temporarily activate it again.

PH-1000 LINE

Thanks to the Class-A built-in preamplier,

the PH-1000 LINE features a volume control

so you can use the knob to adjust the

volume.

Both the PH-1000 and the PH-1000 LINE can

be muted using the dedicated function. The

LINE model also displays the volume.

LR-Swap

ON/OFF

STEREO

S180°

MONO

M180°

With headphones

MUTE

PHONES LO

PHONES HI

Volume setup

PREAMP

STAGE

MUTE

Input

RCA 1 (MC/MM)

RCA 2 (MC/MM)

RCA 3*

XLR 1 (MC only)

XLR 2*

*PH-1000 LINE only

Display

DISP

D50%

D25%

OFF

Input option

PHONO

LOAD (RCA 3/XLR 2)

LINE (RCA 3/XLR 2)*

*PH-1000 LINE only

Rumble

ON/OFF

Not for RCA 3 and

XLR 2

Volume

0-100

LINE

10

EN

DE

IT

| LINE PREAMPLIFIER

LINE PREAMP AND STAGE MODE

The PH-1000 LINE features a Class-A line

preamp of the highest quality that allows

you to control the volume directly through

the phono stage. The line preamp can be

switched off by selecting STAGE from the

PREAMP menu. You can also mute the PH-

1000 selecting MUTE from the same menu or

using the dedicated button on the remote.

When selecting STAGE, a warning message

will be displayed asking if you want to

continue as the volume will increase to max

(fixed level) which might cause accidental

damages to your system. Press SAVE to

confirm and continue.

Display in PREAMP mode Display in STAGE mode

Warning message

11

| EQ CURVES

EQUALISATION CURVE PRESETS

The PH-1000 lets you select the most

appropriate EQ curve for every record with

22 presets available. We included 18 of the

most common and widespread curves: such

as RIAA, Capitol, Columbia/CBS, Deutsche

Grammophon, Decca London USA,

Decca London UK, Decca Mono 78rpm,

Epic, HMW, Mercury, RCA Victor, Philips,

Elektra, l’Oiseau-Lyre and Parlophone. The

equalisation is applied exclusively with

analogue components as the whole circuitry

works in the analogue domain with audio-

grade switches that modify the audio signal

path.

Each curve can also be enhanced with our

proprietary design inspired by the Neumann

Pole for superior high-frequency extension.

Order on device Order on device

Curve 1

Curve 2

Curve 3

Curve 4

Curve 7

Curve 5

Curve 8

Curve 6

Curve 9

Equalisation Equalisation

RIAA

Capitol

Columbia LP

NAB

DGG Teldec

AES

DGG IECN78

London LP

RCA 45

Curve 10

Curve 11

Curve 12

Curve 13

Curve 16

Curve 14

Curve 17

Curve 15

Curve 18

Old RCA

Telefunken

CCIR 78

Old Ortho

American 78

Philips

FFRR 78

500-Flat

Blumlein300

EQ CURVES AVAILABLE

Enhanced

ON/OFF

Not for RCA 3 and

XLR 2

EQ Curves

+18 EQ Curves with

“Enhanced” mode

LIMITLESS CUSTOM CURVES

The limitless curve feature is a unique

innovation. Using analogue technology,

we developed a unique design that allows

you to create unlimited equalisation curves

simply acting on 3 parameters - Bass

Turnover, Bass Shelf and Treble Cut - as it’s

the most effective way to control and plot

the equalisation curve.

Browse the menu of the EQ curves till the

SETUP item and press the knob or the

ENTER key on the remote to access the

menu of the 4 customizable curves.

After modifying the parameters, press the

knob or the ENTER key on the remote to

save.

Now you can select the curve you just

created directly from the main menu.

Bass Turnover (Hz)

This parameter controls the frequency at

which the EQ curve reaches 3dB. You can

adjust the frequency from 200Hz to 800Hz

(for the RIAA standard EQ curve, this

parameter is 500Hz).

Bass Shelf (dB)

This parameter controls the gain at 10Hz

and it’s also called “low frequency shelving

lter”, allowing you to adjust the gain from

+12dB to +20dB. It can also be set to N

which means it won’t affect the curve (for the

RIAA standard EQ curve, this parameter is

R= +20dB).

Treble Cut (dB)

Also known as “10kHz gain roll-off”, this

parameter determines the cut at 10kHz and

can be adjusted from 0dB to -24dB (for the

RIAA standard EQ curve, this parameter is

-13.7dB).

Bass Turnover

Save

Save the values as a

custom EQ.

Cancel

Exit the menu.

Bass Shelf

X = +12dB

C = +14dB

A = +16dB

B = +18dB

R = +20dB

N = Null

EQ preset

EQ 1

EQ 2

EQ 3

EQ 4

Treble Cut

www.goldnote.it/download/media/

PH-1000_EQ_Card.pdf

Here’s a complete list of parameters

for the most popular equalisation

curves:

12

EN

DE

IT

200

250

300

350

400

0

-5

-5,5

-5,7

-6

-7

-8

-8,5

-10

-10,3

500

600

630

700

800

-10,5

-11

-12

-12,3

-12,7

-13,7

-15

-16

-18

-24

SETTINGS

From the SETTINGS menu you can check the

firmware version installed on the unit, reset

it and select the mode key used to control it

with the remote.

To enter the menu, first turn off the Master

Switch located on the rear panel, then press

and keep pressed the SKC (knob on the front

panel) while switching back on the Master

Switch.

FIRMWARE VERSION

The firmware version is shown at the bottom

of the display.

REMOTE CONTROL

Select the mode key assigned to the

PH-1000 by the remote. The combination

SHIFT + PRE is set by default - press SHIFT

and then PRE on the remote to control the

PH-1000. If you set the PH-1000 to PRE,

then simply press the mode key PRE on the

remote.

Once you have selected the desired mode

key, press the knob once to confirm the

selection - the unit will save and go on

standby.

FACTORY RESET

The factory reset function can be used to

reset the PH-1000 to the default settings.

Select SAVE to reset the unit or CANCEL

to exit the menu, press the knob once to

confirm the selection - the unit will save it

and go on standby.

13

|

SETTINGS, FACTORY RESET AND

| FIRMWARE VERSION

La pagina sta caricando ...

Gold Note PH-1000 Manuale utente

Gold Note PH-1000 Manuale utente

in altre lingue

Documenti correlati

Altri documenti