AEG HK634150XB Manuale utente

USER

MANUAL

EN User Manual 2

Hob

DE Benutzerinformation 20

Kochfeld

EL Οδηγίες Χρήσης 40

Εστίες

IT Istruzioni per l’uso 60

Piano cottura

HK634150XB

CONTENTS

1. SAFETY INFORMATION......................................................................................2

2. SAFETY INSTRUCTIONS.................................................................................... 4

3. INSTALLATION.....................................................................................................6

4. PRODUCT DESCRIPTION...................................................................................8

5. DAILY USE......................................................................................................... 10

6. HINTS AND TIPS................................................................................................13

7. CARE AND CLEANING...................................................................................... 14

8. TROUBLESHOOTING........................................................................................15

9. TECHNICAL DATA............................................................................................. 17

10. ENERGY EFFICIENCY.....................................................................................18

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you

impeccable performance for many years, with innovative technologies that help

make life simpler – features you might not find on ordinary appliances. Please

spend a few minutes reading to get the very best from it.

Visit our website to:

Get usage advice, brochures, trouble shooter, service and repair information:

www.aeg.com/support

Register your product for better service:

www.registeraeg.com

Buy Accessories, Consumables and Original spare parts for your appliance:

www.aeg.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.

When contacting our Authorised Service Centre, ensure that you have the

following data available: Model, PNC, Serial Number.

The information can be found on the rating plate.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

1. SAFETY INFORMATION

Before the installation and use of the appliance, carefully

read the supplied instructions. The manufacturer is not

responsible for any injuries or damages that are the

result of incorrect installation or usage. Always keep the

www.aeg.com2

instructions in a safe and accessible location for future

reference.

1.1 Children and vulnerable people safety

• This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning the use of the appliance in a

safe way and understand the hazards involved.

• Do not let children play with the appliance.

• Keep all packaging away from children and dispose of

it appropriately.

• Keep children and pets away from the appliance when

it operates or when it cools down. Accessible parts are

hot.

• If the appliance has a child safety device, this should

be activated.

• Children shall not carry out cleaning and user

maintenance of the appliance without supervision.

• Children aged 3 years and under must be kept away

from this appliance when it is in operation at all times.

1.2 General Safety

• WARNING: The appliance and its accessible parts

become hot during use. Care should be taken to avoid

touching heating elements. Children less than 8 years

of age shall be kept away unless continuously

supervised.

• Do not operate the appliance by means of an external

timer or separate remote-control system.

• WARNING: Unattended cooking on a hob with fat or

oil can be dangerous and may result in fire.

• NEVER try to extinguish a fire with water, but switch

off the appliance and then cover flame e.g. with a lid

or a fire blanket.

ENGLISH 3

• CAUTION: The cooking process has to be supervised.

A short term cooking process has to be supervised

continuously.

• WARNING: Danger of fire: Do not store items on the

cooking surfaces.

• Metallic objects such as knives, forks, spoons and lids

should not be placed on the hob surface since they

can get hot.

• Do not use a steam cleaner to clean the appliance.

• After use, switch off the hob element by its control and

do not rely on the pan detector.

• If the glass ceramic surface / glass surface is cracked,

switch off the appliance to avoid the possibility of

electric shock.

• If the supply cord is damaged, it must be replaced by

the manufacturer, an authorized Service or similarly

qualified persons in order to avoid a hazard.

• WARNING: Use only hob guards designed by the

manufacturer of the cooking appliance or indicated by

the manufacturer of the appliance in the instructions

for use as suitable or hob guards incorporated in the

appliance. The use of inappropriate guards can cause

accidents.

2. SAFETY INSTRUCTIONS

2.1 Installation

WARNING!

Only a qualified person must

install this appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Follow the installation instruction

supplied with the appliance.

• Keep the minimum distance from the

other appliances and units.

• Always take care when moving the

appliance as it is heavy. Always use

safety gloves and enclosed footwear.

• Seal the cut surfaces with a sealant to

prevent moisture to cause swelling.

• Protect the bottom of the appliance

from steam and moisture.

• Do not install the appliance adjacent

to a door or under a window. This

prevents hot cookware to fall from the

appliance when the door or the

window is opened.

• If the appliance is installed above

drawers make sure that the space,

between the bottom of the appliance

and the upper drawer, is sufficient for

air circulation.

• The bottom of the appliance can get

hot. Make sure to install a non-

combustible separation panel under

the appliance to prevent access to the

bottom.

• Make sure that the ventilation space

of 2 mm, between the worktop and

www.aeg.com4

the front of the below unit, is free. The

warranty does not cover damages

caused by the lack of an adequate

ventilation space.

2.2 Electrical Connection

WARNING!

Risk of fire and electrical

shock.

• All electrical connections should be

made by a qualified electrician.

• The appliance must be earthed.

• Before carrying out any operation

make sure that the appliance is

disconnected from the power supply.

• Make sure that the electrical

information on the rating plate agrees

with the power supply. If not, contact

an electrician.

• Make sure the appliance is installed

correctly. Loose and incorrect

electricity mains cable or plug (if

applicable) can make the terminal

become too hot.

• Use the correct electricity mains

cable.

• Do not let the electricity mains cable

tangle.

• Make sure that a shock protection is

installed.

• Use the strain relief clamp on the

cable.

• Make sure the mains cable or plug (if

applicable) does not touch the hot

appliance or hot cookware, when you

connect the appliance to the near

sockets

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to

the mains plug (if applicable) or to the

mains cable. Contact our Authorised

Service Centre or an electrician to

change a damaged mains cable.

• The shock protection of live and

insulated parts must be fastened in

such a way that it cannot be removed

without tools.

• Connect the mains plug to the mains

socket only at the end of the

installation. Make sure that there is

access to the mains plug after the

installation.

• If the mains socket is loose, do not

connect the mains plug.

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type

fuses removed from the holder), earth

leakage trips and contactors.

• The electrical installation must have

an isolation device which lets you

disconnect the appliance from the

mains at all poles. The isolation

device must have a contact opening

width of minimum 3 mm.

2.3 Use

WARNING!

Risk of injury, burns and

electrical shock.

• Remove all the packaging, labelling

and protective film (if applicable)

before first use.

• Use this appliance in a household

environment.

• Do not change the specification of this

appliance.

• Make sure that the ventilation

openings are not blocked.

• Do not let the appliance stay

unattended during operation.

• Set the cooking zone to “off” after

each use.

• Do not rely on the pan detector.

• Do not put cutlery or saucepan lids on

the cooking zones. They can become

hot.

• Do not operate the appliance with wet

hands or when it has contact with

water.

• Do not use the appliance as a work

surface or as a storage surface.

• If the surface of the appliance is

cracked, disconnect immediately the

appliance from the power supply. This

to prevent an electrical shock.

• Users with a pacemaker must keep a

distance of minimum 30 cm from the

induction cooking zones when the

appliance is in operation.

• When you place food into hot oil, it

may splash.

ENGLISH 5

WARNING!

Risk of fire and explosion

• Fats and oil when heated can release

flammable vapours. Keep flames or

heated objects away from fats and

oils when you cook with them.

• The vapours that very hot oil releases

can cause spontaneous combustion.

• Used oil, that can contain food

remnants, can cause fire at a lower

temperature than oil used for the first

time.

• Do not put flammable products or

items that are wet with flammable

products in, near or on the appliance.

WARNING!

Risk of damage to the

appliance.

• Do not keep hot cookware on the

control panel.

• Do not put a hot pan cover on the

glass surface of the hob.

• Do not let cookware to boil dry.

• Be careful not to let objects or

cookware fall on the appliance. The

surface can be damaged.

• Do not activate the cooking zones

with empty cookware or without

cookware.

• Do not put aluminium foil on the

appliance.

• Cookware made of cast iron,

aluminium or with a damaged bottom

can cause scratches on the glass /

glass ceramic. Always lift these

objects up when you have to move

them on the cooking surface.

• This appliance is for cooking

purposes only. It must not be used for

other purposes, for example room

heating.

2.4 Care and cleaning

• Clean regularly the appliance to

prevent the deterioration of the

surface material.

• Deactivate the appliance and let it

cool down before you clean it.

• Disconnect the appliance from the

electrical supply before maintenance.

• Do not use water spray and steam to

clean the appliance.

• Clean the appliance with a moist soft

cloth. Only use neutral detergents. Do

not use any abrasive products,

abrasive cleaning pads, solvents or

metal objects.

2.5 Service

• To repair the appliance contact the

Authorised Service Centre. Use

original spare parts only.

• Concerning the lamp(s) inside this

product and spare part lamps sold

separately: These lamps are intended

to withstand extreme physical

conditions in household appliances,

such as temperature, vibration,

humidity, or are intended to signal

information about the operational

status of the appliance. They are not

intended to be used in other

applications and are not suitable for

household room illumination.

2.6 Disposal

WARNING!

Risk of injury or suffocation.

• Contact your municipal authority for

information on how to discard the

appliance correctly.

• Disconnect the appliance from the

mains supply.

• Cut off the mains electrical cable

close to the appliance and dispose of

it.

3. INSTALLATION

WARNING!

Refer to Safety chapters.

www.aeg.com6

3.1 Before the installation

Before you install the hob, write down the

information bellow from the rating plate.

The rating plate is on the bottom of the

hob.

Serial number ...........................

3.2 Built-in hobs

Only use the built-in hobs after you

assemble the hob into correct built-in

units and work surfaces that align to the

standards.

3.3 Connection cable

• The hob is supplied with a connection

cable.

• To replace the damaged mains cable

use the following (or higher) mains

cable type: H05V2V2-F T min 90°C.

Speak to your local Service Centre.

3.4 Assembly

min.

50mm

min.

500mm

min.

2mm

min. 2 mm

A

B

A

12 mm

28 mm

38 mm

B

57 mm

41 mm

31 mm

min

30 mm

min. 500 mm

< 20 mm

> 20 mm

min. 2 mm

A

B

A

12 mm

28 mm

38 mm

B

57 mm

41 mm

31 mm

min. 500 mm

ENGLISH 7

R 5mm

min.

55mm

560

+1

mm

490

+1

mm

min.

38 mm

min.

2 mm

min.

12 mm

min.

2 mm

4. PRODUCT DESCRIPTION

4.1 Cooking surface layout

210 mm

145 mm

170 mm

265 mm

170 mm

265 mm

1

2 2

3

1

Induction cooking zone

2

Cooking zone

3

Control panel

www.aeg.com8

4.2 Control panel layout

1 2 3 4 5 6 7

811 910

Use the sensor fields to operate the appliance. The displays, indicators and sounds

tell which functions operate.

Sen‐

sor

field

Function Comment

1

ON / OFF To activate and deactivate the hob.

2

Lock / The Child Safety

Device

To lock / unlock the control panel.

3

STOP+GO To activate and deactivate the function.

4

- Heat setting display To show the heat setting.

5

- Timer indicators of cooking

zones

To show for which zone you set the time.

6

- Timer display To show the time in minutes.

7

- To activate and deactivate the outer ring.

8

- To select the cooking zone.

9

/

- To increase or decrease the time.

10

/

- To set a heat setting.

11

Power function To activate and deactivate the function.

4.3 Heat setting displays

Display Description

The cooking zone is deactivated.

ENGLISH 9

Display Description

- / -

The cooking zone operates.

The dot means a change by half of a heating level.

STOP+GO function operates.

Automatic Heat Up function operates.

Power function operates.

+ digit

There is a malfunction.

A cooking zone is still hot (residual heat).

Lock / The Child Safety Device function operates.

Incorrect or too small cookware or no cookware on the cooking zone.

Automatic Switch Off function operates.

4.4 Residual heat indicator

WARNING!

There is a risk of burns

from residual heat.

The induction cooking zones make the

heat necessary for cooking process

directly in the bottom of the cookware.

The glass ceramic is heated by the heat

of the cookware.

5. DAILY USE

WARNING!

Refer to Safety chapters.

5.1 Activating and

deactivating

Touch for 1 second to activate or

deactivate the hob.

5.2 Automatic Switch Off

The function deactivates the hob

automatically if:

• all cooking zones are deactivated,

• you do not set the heat setting after

you activate the hob,

• you spill something or put something

on the control panel for more than 10

seconds (a pan, a cloth, etc.). An

acoustic signal sounds and the hob

deactivates. Remove the object or

clean the control panel.

• the hob gets too hot (e.g. when a

saucepan boils dry). Let the cooking

zone cool down before you use the

hob again.

• you use incorrect cookware. The

symbol comes on and the cooking

zone deactivates automatically after 2

minutes.

• you do not deactivate a cooking zone

or change the heat setting. After some

time comes on and the hob

deactivates.

The relation between the heat setting

and the time after which the hob

deactivates:

Heat setting The hob deacti‐

vates after

, 1 - 2

6 hours

www.aeg.com10

Heat setting The hob deacti‐

vates after

3 - 4 5 hours

5 4 hours

6 - 9 1.5 hour

5.3 The heat setting

Touch to increase the heat setting.

Touch

to decrease the heat setting.

Touch and at the same time to

deactivate the cooking zone.

5.4 Activating and

deactivating the outer rings

You can adjust the surface you cook to

the dimension of the cookware.

Use sensor field:

To activate the outer ring: touch the

sensor field. The indicator comes on.

To deactivate the outer ring: touch the

sensor field until the indicator goes out.

5.5 Automatic Heat Up

If you activate this function you can get a

necessary heat setting in a shorter time.

The function sets the highest heat setting

for some time and then decreases to the

correct heat setting.

To activate the function the

cooking zone must be cold.

To activate the function for a cooking

zone: touch

( comes on).

Immediately touch ( comes on).

Immediately touch until the correct

heat setting comes on. After 3 seconds

comes on.

To deactivate the function: touch .

To activate the function for a cooking

zone if there is no on the display:

touch then chose the highest heat

setting 9 and touch again.

Immediately touch to set a desired

heat setting.

To deactivate the function: change the

heat setting.

5.6 Power function

This function makes more power

available to the induction cooking zones.

The function can be activated for the

induction cooking zone only for a limited

period of time. After this time the

induction cooking zone automatically

sets back to the highest heat setting.

Refer to “Technical

information” chapter.

To activate the function for a cooking

zone: touch . comes on.

To deactivate the function: touch or

.

5.7 Timer

Count Down Timer

You can use this function to set how long

the cooking zone should operate for a

single cooking session.

First set the heat setting for the cooking

zone then set the function.

To set the cooking zone: touch

again and again until the indicator of a

necessary cooking zone comes on.

To activate the function or change the

time: touch

or of the timer to set

the time (00 - 99 minutes). When the

indicator of the cooking zone starts to

flash slowly the time counts down.

To see the remaining time: set the

cooking zone with . The indicator of

the cooking zone starts to flash quickly.

The display shows the remaining time.

To deactivate the function: set the

cooking zone with and touch . The

remaining time counts back to 00. The

indicator of the cooking zone goes out.

ENGLISH 11

When the time comes to an

end, the sound operates and

00 flashes. The cooking

zone deactivates.

To stop the sound: touch .

Minute Minder

You can use this function as a Minute

Minder when the hob is activated and

the cooking zones do not operate. The

heat setting display shows

.

To activate the function: touch .

Touch or of the timer to set the

time. When the time comes to an end,

the sound operates and 00 flashes.

To stop the sound: touch

.

The function has no effect

on the operation of the

cooking zones.

5.8 STOP+GO

This function sets all cooking zones that

operate to the lowest heat setting.

When the function operates, you cannot

change the heat setting.

The function does not stop the timer

functions.

To activate the function: touch

.

comes on.

To deactivate the function: touch .

The previous heat setting comes on.

5.9 Lock

You can lock the control panel while

cooking zones operate. It prevents an

accidental change of the heat setting.

Set the heat setting first.

To activate the function: touch

.

comes on for 4 seconds. The Timer stays

on.

To deactivate the function: touch .

The previous heat setting comes on.

When you deactivate the

hob, you also deactivate this

function.

5.10 The Child Safety Device

This function prevents an accidental

operation of the hob.

To activate the function: activate the

hob with

. Do not set the heat setting.

Touch for 4 seconds. comes on.

Deactivate the hob with

.

To deactivate the function: activate the

hob with . Do not set the heat setting.

Touch for 4 seconds. comes on.

Deactivate the hob with .

To override the function for only one

cooking time: activate the hob with

.

comes on. Touch for 4 seconds.

Set the heat setting in 10 seconds.

You can operate the hob. When you

deactivate the hob with the function

operates again.

5.11 Power management

• Cooking zones are grouped according

to the location and number of the

phases in the hob. See the illustration.

• Each phase has a maximum

electricity loading of 3700 W.

• The function divides the power

between cooking zones connected to

the same phase.

• The function activates when the total

electricity loading of the cooking

zones connected to a single phase

exceeds 3700 W.

• The function decreases the power to

the other cooking zones connected to

the same phase.

• The heat setting display of the

reduced zones alternates between the

chosen heat setting and the reduced

heat setting. After some time the heat

setting display of the reduced zones

stays on the reduced heat setting.

www.aeg.com12

6. HINTS AND TIPS

WARNING!

Refer to Safety chapters.

6.1 Cookware

For induction cooking zones

a strong electro-magnetic

field creates the heat in the

cookware very quickly.

Use the induction cooking

zones with correct

cookware.

Cookware material

• correct: cast iron, steel, enamelled

steel, stainless steel, the bottom

made of multi-layer (with correct mark

from a manufacturer).

• not correct: aluminium, copper,

brass, glass, ceramic, porcelain.

Cookware is correct for an induction

hob if:

• some water boils very quickly on a

zone set to the highest heat setting.

• a magnet pulls on to the bottom of the

cookware.

The bottom of the cookware

must be as thick and flat as

possible.

Cookware made of

enamelled steel and with

aluminium or copper

bottoms can cause the

colour change on the glass-

ceramic surface.

Cookware dimensions

Induction cooking zones adapt to the

dimension of the bottom of the cookware

automatically to some limit.

The cooking zone efficiency is related to

the diameter of the cookware. The

cookware with a smaller diameter than

the minimum receives only a part of the

power generated by the cooking zone.

Refer to “Technical

information” chapter.

6.2 The noises during

operation

If you can hear:

• crack noise: cookware is made of

different materials (sandwich

construction).

• whistle sound: you use the cooking

zone with high power level and the

cookware is made of different

materials (sandwich construction).

• humming: you use high power level.

• clicking: electric switching occurs.

• hissing, buzzing: the fan operates.

The noises are normal and do not

refer to hob malfunction.

6.3 Examples of cooking

applications

The relation between the heat setting

and the cooking zone consumption of

power is not linear. When you increase

the heat setting, it is not proportional to

the increase of the cooking zone

ENGLISH 13

consumption of power. It means that the

cooking zone with the medium heat

setting uses less than a half of its power.

The data in the table is for

guidance only.

Heat setting Use to: Time

(min)

Hints

- 1

Keep cooked food warm. as nec‐

essary

Put a lid on the cookware.

1 - 2. Hollandaise sauce, melt: but‐

ter, chocolate, gelatine.

5 - 25 Mix from time to time.

1 - 2. Solidify: fluffy omelettes, baked

eggs.

10 - 40 Cook with a lid on.

2. - 3. Simmer rice and milkbased

dishes, heating up ready-

cooked meals.

25 - 50 Add the minimum twice as

much liquid as rice, mix milk

dishes part procedure through.

3. - 4. Steam vegetables, fish, meat. 20 - 45 Add some tablespoons of liq‐

uid.

4. - 5. Steam potatoes. 20 - 60 Use max. ¼ l water for 750 g

of potatoes.

4. - 5. Cook larger quantities of food,

stews and soups.

60 - 150 Up to 3 l liquid plus ingredi‐

ents.

5. - 7 Gentle fry: escalope, veal cor‐

don bleu, cutlets, rissoles,

sausages, liver, roux, eggs,

pancakes, doughnuts.

as nec‐

essary

Turn halfway through.

7 - 8 Heavy fry, hash browns, loin

steaks, steaks.

5 - 15 Turn halfway through.

9 Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.

Boil large quantities of water. Power function is activated.

7. CARE AND CLEANING

WARNING!

Refer to Safety chapters.

7.1 General information

• Clean the hob after each use.

• Always use cookware with clean

bottom.

• Scratches or dark stains on the

surface have no effect on how the hob

operates.

• Use a special cleaner applicable for

the surface of the hob.

• Use a special scraper for the glass.

7.2 Cleaning the hob

• Remove immediately: melted plastic,

plastic foil, sugar and food with sugar.

If not, the dirt can cause damage to

the hob. Take care to avoid burns. Put

the special scraper on the glass

surface at an acute angle and move

the blade on the surface.

• Remove when the hob is

sufficiently cool: limescale rings,

www.aeg.com14

water rings, fat stains, shiny metallic

discoloration. Clean the hob with a

moist cloth and non-abrasive

detergent. After cleaning, wipe the

hob dry with a soft cloth.

• Remove shiny metallic

discoloration: use a solution of water

with vinegar and clean the glass

surface with a moist cloth.

8. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

8.1 What to do if...

Problem Possible cause Remedy

You cannot activate or oper‐

ate the hob.

The hob is not connected to

an electrical supply or it is

connected incorrectly.

Check if the hob is correctly

connected to the electrical

supply. Refer to the connec‐

tion diagram.

The fuse is blown. Make sure that the fuse is

the cause of the malfunction.

If the fuse is blown again

and again, contact a quali‐

fied electrician.

Activate the hob again and

set the heat setting in less

than 10 seconds.

You touched 2 or more sen‐

sor fields at the same time.

Touch only one sensor field.

STOP+GO function oper‐

ates.

Refer to "Daily use" chapter.

There is water or fat stains

on the control panel.

Clean the control panel.

An acoustic signal sounds

and the hob deactivates.

An acoustic signal sounds

when the hob is deactivated.

You put something on one or

more sensor fields.

Remove the object from the

sensor fields.

The hob deactivates. You put something on the

sensor field .

Remove the object from the

sensor field.

Residual heat indicator does

not come on.

The zone is not hot because

it operated only for a short

time.

If the zone operated suffi‐

ciently long to be hot, speak

to an Authorised Service

Centre.

Automatic Heat Up function

does not operate.

The zone is hot. Let the zone become suffi‐

ciently cool.

ENGLISH 15

Problem Possible cause Remedy

The highest heat setting is

set.

The highest heat setting has

the same power as the func‐

tion.

You decreased the heat set‐

ting to .

Start from and only in‐

crease the heat setting.

You cannot activate the out‐

er ring.

Activate the inner ring first.

There is a dark area

on the multiple zone.

It is normal that there is a

dark area on the multiple

zone.

The heat setting changes

between two levels.

Power management function

operates.

Refer to "Daily use" chapter.

The sensor fields become

hot.

The cookware is too large or

you put it too near to the

controls.

Put large cookware on the

rear zones if possible.

comes on.

Automatic Switch Off oper‐

ates.

Deactivate the hob and acti‐

vate it again.

comes on.

The Child Safety Device or

the Lock function operates.

Refer to "Daily use" chapter.

comes on.

There is no cookware on the

zone.

Put cookware on the zone.

The cookware is incorrect. Use the correct cookware.

Refer to “Hints and tips”

chapter.

The diameter of the bottom

of the cookware is too small

for the zone.

Use cookware with correct

dimensions.

Refer to “Technical informa‐

tion” chapter.

and a number come on.

There is an error in the hob. Disconnect the hob from the

electrical supply for some

time. Disconnect the fuse

from the electrical system of

the house. Connect it again.

If comes on again, speak

to an Authorised Service

Centre.

www.aeg.com16

Problem Possible cause Remedy

comes on.

There is an error in the hob

because a cookware boiled

dry. Automatic Switch Off

and the overheating protec‐

tion for the zones operate.

Deactivate the hob. Remove

the hot cookware. After ap‐

proximately 30 seconds, ac‐

tivate the zone again. If the

cookware was the problem,

the error message goes out.

Residual heat indicator can

stay on. Let the cookware

become sufficiently cool.

Check if your cookware is

compatible with the hob.

Refer to “Hints and tips”

chapter.

E6 comes on. The second phase of the

power supply is missing.

Check if the hob is correctly

connected to the electrical

supply. Remove the fuse,

wait one minute, and insert

the fuse again.

8.2 If you cannot find a

solution...

If you cannot find a solution to the

problem yourself, contact your dealer or

an Authorised Service Centre. Give the

data from the rating plate. Give also

three digit letter code for the glass

ceramic (it is in the corner of the glass

surface) and an error message that

comes on. Make sure, you operated the

hob correctly. If not the servicing by a

service technician or dealer will not be

free of charge, also during the warranty

period. The instructions about the

Service Centre and conditions of

guarantee are in the guarantee booklet.

9. TECHNICAL DATA

9.1 Rating plate

Modell HK634150XB PNC 949 595 095 02

Typ 60 GAD DA AU 220 - 240 V 50 - 60 Hz

Induction 3.7 kW Made in Germany

Ser.Nr. ................. 7.3 kW

AEG

9.2 Cooking zones specification

Cooking zone Nominal power

(maximum heat

setting) [W]

Power function

[W]

Power function

maximum du‐

ration [min]

Cookware di‐

ameter [mm]

Left front 2300 3700 10 180 - 210

Left rear 1200 - - 145

ENGLISH 17

Cooking zone Nominal power

(maximum heat

setting) [W]

Power function

[W]

Power function

maximum du‐

ration [min]

Cookware di‐

ameter [mm]

Right front 1400 2500 4 125 - 145

Right rear 1500 / 2400 - - 170 / 265

The power of the cooking zones can be

different in some small range from the

data in the table. It changes with the

material and dimensions of the

cookware.

For optimal cooking results use

cookware not larger than the diameter in

the table.

10. ENERGY EFFICIENCY

10.1 Product information according to EU 66/2014

Model identification HK634150XB

Type of hob Built-In Hob

Number of cooking zones 4

Heating technology Induction and

Radiant Heater

Diameter of circular cook‐

ing zones (Ø)

Left front

Left rear

Right front

21.0 cm

14.5 cm

Lenght (L) and width (W) of

non circular cooking zone

Right rear L 17.0 cm

W 26.5 cm

Energy consumption per

cooking zone (EC electric

cooking)

Left front

Left rear

Right front

Right rear

175.5 Wh / kg

196.8 Wh / kg

176.6 Wh / kg

182.6 Wh / kg

Energy consumption of the

hob (EC electric hob)

182.9 Wh / kg

EN 60350-2 - Household electric cooking

appliances - Part 2: Hobs - Methods for

measuring performance

10.2 Energy saving

You can save energy during everyday

cooking if you follow below hints.

• When you heat up water, use only the

amount you need.

• If it is possible, always put the lids on

the cookware.

• Before you activate the cooking zone

put the cookware on it.

• The cookware bottom should have the

same diameter as the cooking zone.

• Put the smaller cookware on the

smaller cooking zones.

• Put the cookware directly in the centre

of the cooking zone.

• Use the residual heat to keep the food

warm or to melt it.

www.aeg.com18

11. ENVIRONMENTAL CONCERNS

Recycle materials with the symbol .

Put the packaging in relevant containers

to recycle it. Help protect the

environment and human health by

recycling waste of electrical and

electronic appliances. Do not dispose of

appliances marked with the symbol

with the household waste. Return the

product to your local recycling facility or

contact your municipal office.

ENGLISH 19

INHALTSVERZEICHNIS

1. SICHERHEITSHINWEISE.................................................................................. 20

2. SICHERHEITSANWEISUNGEN.........................................................................23

3. MONTAGE..........................................................................................................25

4. GERÄTEBESCHREIBUNG.................................................................................27

5. TÄGLICHER GEBRAUCH.................................................................................. 29

6. TIPPS UND HINWEISE...................................................................................... 32

7. REINIGUNG UND PFLEGE................................................................................34

8. FEHLERSUCHE................................................................................................. 34

9. TECHNISCHE DATEN........................................................................................37

10. ENERGIEEFFIZIENZ........................................................................................38

FÜR PERFEKTE ERGEBNISSE

Danke, dass Sie sich für dieses AEG Produkt entschieden haben. Wir haben es

geschaffen, damit Sie viele Jahre von seiner ausgezeichneten Leistung und den

innovativen Technologien, die Ihnen das Leben erleichtern, profitieren können. Es

ist mit Funktionen ausgestattet, die in gewöhnlichen Geräten nicht vorhanden

sind. Nehmen Sie sich ein paar Minuten Zeit zum Lesen, um seine Vorzüge

kennen zu lernen.

Besuchen Sie uns auf unserer Website, um:

Anwendungshinweise, Prospekte, Fehlerbehebungs-, Service- und Reparatur-

Informationen zu erhalten:

www.aeg.com/support

Ihr erworbenes Produkt zu registrieren, um den besten Service für es zu

gewährleisten:

www.registeraeg.com

Zubehör, Verbrauchsmaterial und Original-Ersatzteile für Ihr Gerät zu

erwerben:

www.aeg.com/shop

REPARATUR- UND KUNDENDIENST

Verwenden Sie ausschließlich Original-Ersatzteile.

Halten Sie folgende Angaben bereit, wenn Sie sich an den Kundendienst

wenden: Modell, Produktnummer (PNC), Seriennummer.

Diese Informationen finden Sie auf dem Typenschild.

Warnungs-/Sicherheitshinweise

Allgemeine Informationen und Empfehlungen

Informationen zum Umweltschutz

Änderungen vorbehalten.

1. SICHERHEITSHINWEISE

Lesen Sie vor der Montage und dem Gebrauch des

Geräts zuerst die Gebrauchsanleitung. Bei Verletzungen

oder Schäden infolge nicht ordnungsgemäßer Montage

www.aeg.com20

La pagina sta caricando ...

AEG HK634150XB Manuale utente

AEG HK634150XB Manuale utente

in altre lingue

Documenti correlati

Altri documenti