Mellanox Technologies SB7700 Manuale utente

Mellanox Technologieswww.mellanox.com

Mellanox 1U EDR 100Gb/s

InfiniBand Switch Systems and IB

Router

Hardware User Manual

Models: SB7700/SB7790/SB7800/SB7890/SB7780

Rev. 1.7

Mellanox Technologies

350 Oakmead Parkway Suite 100

Sunnyvale, CA 94085

U.S.A.

www.mellanox.com

Tel: (408) 970-3400

Fax: (408) 970-3403

Mellanox®, Mellanox logo, Accelio®, BridgeX®, CloudX logo, CompustorX®, Connect-IB®, ConnectX®,

CoolBox®, CORE-Direct®, EZchip®, EZchip logo, EZappliance®, EZdesign®, EZdriver®, EZsystem®,

GPUDirect®, InfiniHost®, InfiniBridge®, InfiniScale®, Kotura®, Kotura logo, Mellanox CloudRack® , Mellanox

CloudXMellanox® , Mellanox Federal Systems®, Mellanox HostDirect® , Mellanox Multi-Host® , Mellanox Open

Ethernet®, Mellanox OpenCloud® , Mellanox OpenCloud Logo® , Mellanox PeerDirect® , Mellanox ScalableHPC® ,

Mellanox StorageX® , Mellanox TuneX® , Mellanox Connect Accelerate Outperform logo , Mellanox Virtual Modular

Switch®, MetroDX®, MetroX®, MLNX-OS®, NP-1c®, NP-2®, NP-3®, Open Ethernet logo, PhyX®, PlatformX®,

PSIPHY®, SiPhy®, StoreX®, SwitchX®, Tilera®, Tilera logo, TestX®, TuneX®, The Generation of Open Ethernet

logo, UFM®, Unbreakable Link® , Virtual Protocol Interconnect®, Voltaire® and Voltaire logo are registered

trademarks of Mellanox Technologies , Ltd.

All other trademarks are property of their respective owners .

For the most updated list of Mellanox trademarks, visit http://www.mellanox.com/page/trademarks

NOTE:

THIS HARDWARE, SOFTWARE OR TEST SUITE PRODUCT (“PRODUCT (S)”) AND ITS RELATED

DOCUMENTATION ARE PROVIDED BY MELLANOX TECHNOLOGIES “AS-IS” WITH ALL FAULTS OF ANY

KIND AND SOLELY FOR THE PURPOSE OF AIDING THE CUSTOMER IN TESTING APPLICATIONS THAT

USE THE PRODUCTS IN DESIGNATED SOLUTIONS. THE CUSTOMER'S MANUFACTURING TEST

ENVIRONMENT HAS NOT MET THE STANDARDS SET BY MELLANOX TECHNOLOGIES TO FULLY

QUALIFY THE PRODUCT(S) AND/OR THE SYSTEM USING IT. THEREFORE, MELLANOX TECHNOLOGIES

CANNOT AND DOES NOT GUARANTEE OR WARRANT THAT THE PRODUCTS WILL OPERATE WITH THE

HIGHEST QUALITY. ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

NONINFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL MELLANOX BE LIABLE TO CUSTOMER OR

ANY THIRD PARTIES FOR ANY DIRECT, INDIRECT, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

DAMAGES OF ANY KIND (INCLUDING, BUT NOT LIMITED TO, PAYMENT FOR PROCUREMENT OF

SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)

HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT , STRICT LIABILITY,

OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY FROM THE USE OF THE

PRODUCT (S) AND RELATED DOCUMENTATION EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE.

Rev. 1.7Document Number: MLNX-15-4668 2Mellanox Technologies

Rev. 1.7 3Mellanox Technologies

List of Tables

Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Chapter 1 Introduction to Mellanox SB77X0/SB78X0 Switch Systems and SB7780

InfinBand Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

1.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

1.2 Speed and Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

1.3 Management Interfaces and FRUs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

1.4 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

1.5 Certifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

1.6 Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Chapter 2 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2.1 Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2.2 Air Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2.3 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2.4 Mounting Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

2.4.1 19” Systems Mounting - Static Rail-Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

2.4.2 19” Systems Mounting- Telescopic Rail-Kit. . . . . . . . . . . . . . . . . . . . . . . . . 23

2.5 Cable Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

2.6 Initial Power On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

2.7 System Bring-Up of Managed Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

2.7.1 Configuring Network Attributes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

2.7.2 Remote Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

2.8 FRU Replacements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

2.8.1 Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

2.8.2 Fans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Chapter 3 Software Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

3.1 InfiniBand Subnet Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

3.2 Fabric Inspector (Diagnostics) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

3.3 Upgrading Software (on Managed Systems) . . . . . . . . . . . . . . . . . . . . . . . 40

3.4 Updating Firmware on Externally Managed Systems . . . . . . . . . . . . . . . . 40

3.4.1 Updating Firmware In-band (Typical) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Chapter 4 Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

4.1 Supported Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

4.1.1 Data Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

4.1.2 Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Rev. 1.74 Mellanox Technologies

4.1.3 RS232 (Console). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

4.1.4 Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

4.1.5 USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

4.1.6 Reset Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

4.2 LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

4.2.1 LED Notifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

4.3 Inventory Pull-out Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Chapter 5 Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

5.1 Troubleshooting Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Chapter 6 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

6.1 SB77X0/SB78X0 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Appendix A Accessory and Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . 54

Appendix B Thermal Threshold Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Appendix C Interface Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

C.1 QSFP Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

C.2 RJ-45 CONSOLE and I²C Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

C.3 RJ45 to DB9 Harness Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Appendix D Disassembly and Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

D.1 Disassembly Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

D.2 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Appendix E Safety Warnings (Multiple Languages) . . . . . . . . . . . . . . . . . . . . 61

E.1 Nordic Countries Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

E.2 Installation Safety Warnings (English) . . . . . . . . . . . . . . . . . . . . . . . . . . 61

E.3 תירבע) הנקתהב תוחיטב תורהזא) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

E.4 安裝安全性警告 (Chinese) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

E.5 Avertissements de sécurité pour l'installation (French). . . . . . . . . . . . 72

E.6 Installation Sicherheitshinweise(German). . . . . . . . . . . . . . . . . . . . . . . 76

E.7 Advertencias de seguridad de instalación (Spanish) . . . . . . . . . . . . . . 79

E.8 Предупреждения по технике безопасности при установке (Russian) 83

E.9 Avertismente privind siguranţa la instalare (Romanian) . . . . . . . . . . . 87

E.10 Sigurnosna upozorenja za instaliranje (Croatian) . . . . . . . . . . . . . . . . . 90

E.11 Avvertenze di sicurezza per l’installazione (Italian) . . . . . . . . . . . . . . . 94

E.12 Montaj Güvenlik Uyarıları (Turkish) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

E.13 Japan VCCI Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

Rev. 1.7 5Mellanox Technologies

List of Figures

Figure 1: SB77X0/SB78X0 Front Side View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Figure 2: SB7700/SB7780/SB7800* Rear Side View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Figure 3: SB7790/SB7890 Rear Side View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Figure 4: Air Flow Direction Marking - Power Side Inlet to Connector Side Outlet . . . . . . . . . . . . . 17

Figure 5: Air Flow Direction Marking - Connector Side Inlet to Power Side Outlet . . . . . . . . . . . . . 17

Figure 6: Rack Rail Kit Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Figure 7: Installation Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Figure 8: Attaching the Rails to the Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Figure 9: Attaching the Brackets to the Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Figure 10: Attaching the Brackets to the Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Figure 11: Sliding the Blades in the Rails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Figure 12: Rack Rail Kit Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Figure 13: Rails Separation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Figure 14: Mounting the Outer Rails into the Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Figure 15: Attaching the Inner Rails to the Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Figure 16: Securing the Chassis in the Inner Rails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Figure 17: Sliding the Switch into the Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Figure 18: Pulling the Unit Outwards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Figure 19: Locking Mechanism . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Figure 20: Cable Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Figure 21: System Status LEDs 5 Minutes After Power On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Figure 22: Two Power Inlets - Electric Caution Notifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Figure 23: PS Unit Pulled Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Figure 24: Fan Module Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Figure 25: System Status LEDs - Front and Rear sides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Figure 26: Fan Status LED - Front and Rear Sides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Figure 27: Power Status LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Figure 28: Rear Side Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Figure 29: Port LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Figure 30: Pull-out Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Figure 31: QSFP Connector Male and Female Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Figure 32: RJ45 to DB9 Harness Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Rev. 1.76 Mellanox Technologies

List of Tables

Table 1: Revision History Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Table 2: References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Table 3: Speed and Switching Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Table 4: Management Interfaces and FRUs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Table 5: Ordering Part Numbers (OPNs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Table 6: Air Flow Color Legend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Table 7: Installation Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Table 8: Installation Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Table 9: Serial Terminal Program Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Table 10: Configuration Wizard Session . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Table 11: Configuration Wizard Session - Static IP Configuration . . . . . . . . . . . . . . . . . . . . . 34

Table 12: LEDs Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Table 13: System Status LED Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Table 14: Fan Status Front LED Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Table 15: Fan Status Rear LED Assignments (One LED per Fan) . . . . . . . . . . . . . . . . . . . . . . . 46

Table 16: Power Supply Unit Status Front LED Assignments . . . . . . . . . . . . . . . . . . . . . . . . . 47

Table 17: Power Supply Unit Status Rear LED Assignments . . . . . . . . . . . . . . . . . . . . . . . . . .48

Table 18: Bad Port LED Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Table 19: Port LEDs in InfiniBand System Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Table 20: Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Table 21: SB77X0/SB78X0 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Table 22: OPNs for Replacement Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Table 23: QSFP Interface Pins 1-23 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Table 24: QSFP Interface Pins 24-38 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Table 25: RJ-45 CONSOLE and I²C Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Rev. 1.7 7Mellanox Technologies

Revision History

Table 1 - Revision History Table

Date Revision Description

February 2017 1.7 Updated “RJ45 to DB9 Harness Pinout”

Updated “Specifications”

December 2016 1.6 Updated document title

September 2016 1.5 Added “Noise Level” to “Specifications”

July 2016 1.4 Added the SB7780 InfinBand router

Updated LED colors in “Interfaces”

Updated “Specifications”

March 2016 1.3 Added SB7800 and SB7890

Updated “System Bring-Up of Managed Systems”

Updated “Specifications”

July 2015 1.2 Changed document’s title

June 2015 1.1 Added:

• Hebrew safety warnings

Updated:

• Figure 1,“SB77X0/SB78X0 Front Side View”

• Table 21, “SB77X0/SB78X0 Specifications”

April 2015 1.0 Initial release

Rev. 1.78 Mellanox Technologies

About this Manual

This manual describes the installation and basic use of the Mellanox InfiniBand EDR 1U

switches.

Intended Audience

This manual is intended for IT managers and system administrators.

References

Conventions

The following icons are used throughout this document to indicate information that is important

to the user.

Table 2 - References

Document Description

InfiniBand Architecture Spec-

ification, Volume 1, Release

1.2.1, and Volume 2, Release

1.3

The InfiniBand Architecture Specification that is provided by IBTA

MLNX-OS® User Manual This document contains information regarding configuring and

managing MLNX-OS software- see http://www.mellanox.com/

page/mlnx_os.

This icon makes recommendations to the user.

This icon indicates information that is helpful to the user.

Rev. 1.7 9Mellanox Technologies

This icon indicates a situation that can potentially cause damage to hardware or

software.

This icon indicates a situation that can potentially cause personal injury.

Rev. 1.710 Mellanox Technologies

1 Introduction to Mellanox SB77X0/SB78X0 Switch Systems and

SB7780 InfinBand Router

1.1 Overview

The SB77X0/SB78X0 switch systems provide the highest performing fabric solution in a 1U

form factor by delivering up to 7Tb/s of non-blocking bandwidth with sub 100ns port-to-port

latency. These systems are the industry's most cost-effective building blocks for embedded sys

-

tems and storage with a need for low port density systems. Whether looking at price-to-perfor-

mance or energy-to-performance, these systems offer superior performance, power and space,

reducing capital and operating expenses and providing the best return-on-investment.

Powerful servers combined with high-performance storage and applications that use increasingly

complex computations are causing data bandwidth requirements to spiral upward. As servers are

deployed with next generation processors, High-Performance Computing (HPC) environments

and Enterprise Data Centers (EDC) need every last bit of bandwidth delivered with Mellanox's

EDR InfiniBand systems.

Built with Mellanox's latest SwitchIB™ InfiniBand EDR 100Gb/s switch device, these stand-

alone systems are an ideal choice for top-of-rack leaf connectivity or for building small to

extremely large sized clusters. These systems enable efficient computing with features such as

static routing, adaptive routing, and advanced congestion management. These features ensure the

maximum effective fabric bandwidth by eliminating congestion.

The SB7700/SB7800, dual-core x86 CPU, comes with an onboard subnet manager, enabling

simple, out-of-the-box fabric bring-up for up to 2048 nodes.

SB7700/SB7800 switch runs the same MLNX-OS® software package as Mellanox FDR prod-

ucts to deliver complete chassis management of the firmware, power supplies, fans and ports.

Mellanox's edge systems can also be coupled with Mellanox's Unified Fabric Manager (UFM®)

software for managing scale-out InfiniBand computing environments. UFM enables data center

operators to efficiently provision, monitor and operate the modern data center fabric. UFM

boosts application performance and ensures that the fabric is up and running at all times.

InfiniBand systems come as internally or externally managed. Internally managed systems

include a CPU that runs the management software (MLNX-OS®) and management ports, which

are used to transfer management traffic into the system. Externally managed systems come with

-

out the CPU and management ports, and are managed using firmware tools.

The SB7780 InfiniBand router is based on the SwitchIB™ switch ASIC, and offers fully flexible

36 EDR 100Gb/s ports, which can be split among six different subnets. The InfinBand router

brings two major enhancements to the Mellanox switch portfolio:

1. Increases resiliency by segregating the data center’s network into several subnets, with each

subnet running its own subnet manager, effectively isolating each subnet from the others’

availability or instability

2. Enables scaling of the fabric up to a virtually unlimited number of nodes.

Introduction to Mellanox SB77X0/SB78X0 Switch Systems and SB7780 InfinBand Router

Rev. 1.7

11Mellanox Technologies

Figure 1: SB77X0/SB78X0 Front Side View

Figure 2: SB7700/SB7780/SB7800* Rear Side View

Figure 3: SB7790/SB7890 Rear Side View

*The SB7800 models include one MGT port labeled .

1.2 Speed and Switching

Table 3 describes maximum throughput and interface speed per system model.

1.3 Management Interfaces and FRUs

Table 4 lists the various management interfaces and available replacement parts per system

model.

Table 3 - Speed and Switching Capabilities

System Model EDR 100Gb/s QSFP28 Interfaces Max Throughput

SB7700 36 7.2Tb/s

SB7790 36 7.2Tb/s

SB7800 36 7.2Tb/s

SB7890 36 7.2Tb/s

SB7780 36 7.2Tb/s

Table 4 - Management Interfaces and FRUs

System

Model

USB MGT I²C* Console*

Replaceable

PSU

Replaceable

Fan

SB7700 Rear Rear (2

ports)

Rear Rear Yes Yes

SB7790 NA NA Rear NA Yes Yes

Rev. 1.712 Mellanox Technologies

*The same connector is used for the I²C and the console interfaces.

1.4 Features

For a full feature list, please refer to the systems’ product briefs:

http://www.mellanox.com/related-docs/prod_ib_switch_systems/pb_sb7700.pdf

http://www.mellanox.com/related-docs/prod_ib_switch_systems/pb_sb7790.pdf

http://www.mellanox.com/related-docs/prod_ib_switch_systems/pb_sb7800.pdf

http://www.mellanox.com/related-docs/prod_ib_switch_systems/pb_sb7890.pdf

http://www.mellanox.com/related-docs/prod_ib_switch_systems/pb_sb7780.pdf

1.5 Certifications

The list of certifications (such as EMC, Safety and others) per system for different regions of the

world is located on the Mellanox website at:

http://www.mellanox.com/page/environmental_compliance

1.6 Ordering Information

the following table lists ordering information for the available systems. Please pay attention to

the airflow direction when ordering your system. For more details, see

“Air Flow” on page 15.

SB7800 Rear Rear (1

port)

Rear Rear Yes Yes

SB7890 NA NA Rear NA Yes Yes

SB7780 Rear Rear (2

ports)

Rear Rear Yes Yes

Table 5 - Ordering Part Numbers (OPNs)

System

Model

OPN Description

SB7700 MSB7700-

ES2F

Switch-IB™ based EDR InfiniBand 1U Switch, 36 QSFP28 ports, 2

Power Supplies (AC), x86 dual core, standard depth, P2C airflow,

Rail Kit, RoHS6

MSB7700-

ES2R

Switch-IB™ based EDR InfiniBand 1U Switch, 36 QSFP28 ports, 2

Power Supplies (AC), x86 dual core, standard depth, C2P airflow,

Rail Kit, RoHS6

MSB7700-

EB2F

Switch-IB™ based EDR InfiniBand 1U Switch, 36 QSFP28 ports, 2

Power Supplies (AC), x86 dual core, short depth, P2C airflow, Rail

Kit, RoHS6

Table 4 - Management Interfaces and FRUs

System

Model

USB MGT I²C* Console*

Replaceable

PSU

Replaceable

Fan

Introduction to Mellanox SB77X0/SB78X0 Switch Systems and SB7780 InfinBand Router

Rev. 1.7

13Mellanox Technologies

SB7790 MSB7790-

ES2F

Switch-IB™ based EDR InfiniBand 1U Switch, 36 QSFP28 ports, 2

Power Supplies (AC), unmanaged, standard depth, P2C airflow,

Rail Kit, RoHS6

MSB7790-

EB2F

Switch-IB™ based EDR InfiniBand 1U Switch, 36 QSFP28 ports, 2

Power Supplies (AC), unmanaged, Short depth, P2C airflow, Rail

Kit, RoHS6

MSB7790-

ES2R

Switch-IB™ based EDR InfiniBand 1U Switch, 36 QSFP28 ports, 2

Power Supplies (AC), unmanaged, standard depth, C2P airflow,

Rail Kit, RoHS6

SB7800 MSB7800-

ES2F

Switch-IB(TM)-2 based EDR InfiniBand 1U Switch, 36 QSFP28

ports, 2 Power Supplies (AC), x86 dual core, standard depth, P2C

airflow, Rail Kit, RoHS6

MSB7800-

ES2R

Switch-IB(TM)2 based EDR InfiniBand 1U Switch, 36 QSFP28

ports, 2 Power Supplies (AC), x86 dual core, standard depth, C2P

airflow, Rail Kit, RoHS6

SB7890 MSB7890-

ES2F

Switch-IB(TM)-2 based EDR InfiniBand 1U Switch, 36 QSFP28

ports, 2 Power Supplies (AC), unmanaged, standard depth, P2C air

-

flow, Rail Kit, RoHS6

MSB7890-

ES2R

Switch-IB(TM)2 based EDR InfiniBand 1U Switch, 36 QSFP28

ports, 2 Power Supplies (AC), unmanaged, standard depth, C2P air

-

flow, Rail Kit, RoHS6

SB7780 MSB7780-

ES2F

SwitchIB™-based 36-port QSFP28 EDR 1U Managed InfiniBand

router system with a

non-blocking switching capacity of 7Tb/s. 2PS, Standard depth,

P2C airflow, RoHS-6

Table 5 - Ordering Part Numbers (OPNs)

System

Model

OPN Description

Installation

Rev. 1.7

14Mellanox Technologies

2 Installation

Installation and initialization of the system require attention to the normal mechanical, power,

and thermal precautions for rack-mounted equipment.

 The installation procedure for the system involves the following phases:

Step 1. Follow the safety warnings in Section 2.1 on page 14

Step 2. Pay attention to the air flow consideration within the system and rack - refer to “Air Flow”

on page 15

Step 3. Make sure that none of the package contents is missing or damaged - see “Package Con-

tents” on page 17

Step 4. Mount the system as suggested in “Mounting Options” on page 18

Step 5. Power on the system - refer to “Initial Power On” on page 30

Step 6. Perform system bring-up - see “System Bring-Up of Managed Systems” on page 31

FRU replacements are described in Section 2.8 on page 36.

2.1 Safety Warnings

Prior to the installation, please review the safety warnings as follows:

• For Nordic Countries Notices, see Section E.1, “Nordic Countries Notices,” on page 61.

• For Safety Warnings in English, see Section E.2, “Installation Safety Warnings

(English),” on page 61.

• For Safety Warnings in Hebrew, see Section E.3, “תירבע) הנקתהב תוחיטב תורהזא),” on

page 64.

• For Safety Warnings in Chinese, see Section E.4 on page 68.

• For Safety Warnings in French, see Section E.5, “Avertissements de sécurité pour

l'installation (French),” on page 72.

• For Safety Warnings in German, Section E.6, “Installation Sicherheitshinweise(Ger-

man),” on page 76.

• For Safety Warnings in Spanish, see Section E.7, “Advertencias de seguridad de insta-

lación (Spanish),” on page 79.

• For Safety Warnings in Russian, see Section E.8, “Предупреждения по технике

безопасности при установке (Russian),” on page 83.

• For Safety Warnings in Romanian, see Section E.9, “Avertismente privind siguranţa la

instalare (Romanian),” on page 87.

The rack mounting holes conform to the EIA-310 standard for 19-inch racks. Take

precautions to guarantee proper ventilation in order to maintain good airflow at ambi

-

ent temperature.

Rev. 1.715 Mellanox Technologies

• For Safety Warnings in Croatian, see Section E.10, “Sigurnosna upozorenja za instali-

ranje (Croatian),” on page 90.

• For Safety Warnings in Italian, see Section E.11, “Avvertenze di sicurezza per

l’installazione (Italian),” on page 94.

• For Safety Warnings in Turkish see Section E.12, “Montaj Güvenlik Uyarıları (Turk-

ish),” on page 98.

2.2 Air Flow

Mellanox systems are offered with two air flow patterns:

• Connector (front) side inlet to power side outlet - marked with red power supplies/fans

FRUs’ handles, as shown in

Figure 4.

• Power (rear) side inlet to connector side outlet - marked with blue power supplies/fans

FRUs’ handles, as shown in

Figure 5.

Table 6 provides an air flow color legend and respective OPN designations.

All servers and systems in the same rack should be planned with the same airflow

direction.

All FRU components need to have the same air flow direction. A mismatch in the air

flow will affect the heat dissipation.

Table 6 - Air Flow Color Legend

Direction

OPN

Designation

Description

R

Connector side inlet to power side outlet.

Red latches are placed on the power inlet

side.

Installation

Rev. 1.7

16Mellanox Technologies

F

Power side inlet to connector side outlet.

Blue latches are placed on the power

inlet side.

Table 6 - Air Flow Color Legend

Direction

OPN

Designation

Description

Rev. 1.717 Mellanox Technologies

Figure 4: Air Flow Direction Marking - Power Side Inlet to Connector Side Outlet

Figure 5: Air Flow Direction Marking - Connector Side Inlet to Power Side Outlet

2.3 Package Contents

Before installing your new system, unpack it and check against the parts list below that all the

parts have been sent. Check the parts for visible damage that may have occurred during shipping.

The SB77X0/SB78X0 package content is as follows:

• 1 x System

• 1 x Rail kit

• 2 x Power cables – Type C13-C14

• 1 x Harness: HAR000028 – Harness RS232 2M cable – DB9 to RJ-45 (in SB7X00 mod-

els only)

• 2 x Cable retainers

•Quick Start Guide

If anything is damaged or missing, contact your sales representative at support@mella-

nox.com.

Installation

Rev. 1.7

18Mellanox Technologies

2.4 Mounting Options

By default, the system is sold with the Static Rail-kit described in Section 2.4.1. A Telescopic

rail-kit can be purchased separately. For the Telescopic Rail-kit installation instructions, see Sec-

tion 2.4.2.

2.4.1 19” Systems Mounting - Static Rail-Kit

The following parts are included in the Static Rail kit (see Figure 6):

• 2x Rack mount rails (A)

• 2x Rack mount brackets (B)

• 2x Rack mount blades (C)

• 8x M6 Standard cage nuts and 8x M6 Standard pan-head Phillips screws (D)

• 4x Phillips100 DEG F.H TYPE-I ST.ST 6-32 X 1/4 screw with around patch (E)

At least two people are required to safely mount the system in the rack.

Table 7 - Installation Kit

Kit OPN Rack Size and Rack Depth Range

MTEF-KIT-A Short (17”-24”) or Standard (24”-34”)

Rev. 1.719 Mellanox Technologies

Figure 6: Rack Rail Kit Parts

 To mount the system into the rack:

Before mounting the system to the rack, select the way you wish to place the system. Pay atten-

tion to the airflow within the rack cooling, connector and cabling options.

While planning how to place the system, consider the two installation options shown in Figure 7,

and review the following points:

• Make sure the system air flow is compatible with your installation selection. It is import-

ant to keep the airflow within the rack in the same direction.

• Note that the part of the system to which you choose to attach the rails (the front panel

direction, as demonstrated in Option 1 or the FRUs direction, as demonstrated in Option

2) will determine the system’s adjustable side. The system’s part to which the brackets

are attached will be adjacent to the cabinet.

• The FRU side is extractable. Mounting the rack brackets inverted to the FRU side

(Option 2) will allow you to slide the FRUs, in and out.

Installation

Rev. 1.7

20Mellanox Technologies

Figure 7: Installation Options

Step 1. Attach the left and right rack mount rails (A) to the switch, by gently pushing the switch

chassis’ pins through the slider key holes, until locking occurs.

Step 2. Secure the chassis in the rails, screwing 2 flat head Phillips screws (E) in the designated

points with a torque of 1.5±0.2 Nm. See

Figure 8.

Figure 8: Attaching the Rails to the Chassis

Step 3. Attach the left and right rack mount brackets (B) to the switch, by gently pushing the switch

chassis’ pins through the slider key holes, until locking occurs. Secure the system in the

brackets by screwing the remaining 2 flat head Phillips screws (E) in the designated points

with a torque of 1.5±0.2 Nm. See

Figure 9.

La pagina sta caricando ...

Mellanox Technologies SB7700 Manuale utente

Questo manuale è adatto anche per

Mellanox Technologies SB7700 Manuale utente

in altre lingue

Documenti correlati

Altri documenti