Timex Ironman Bodylink Trail Runner Guida utente

W-188 589-095006 NA

p e r f o r m a n c e w a t c h u s e r g u i d e

Performance Watch User Guide

English page 1

Français page 81

Español página 159

Português página 239

BODYLINK SYSTEM

®

589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page CVR2

T A B L E O F C O N T E N T S

Register your product at www.timex.com

Introduction...........................................................................................7

Welcome! ...............................................................................................7

Manual organization............................................................................8

Resources..............................................................................................9

Print resources ...................................................................................9

Web resources.....................................................................................9

Performance Watch Overview ............................................................10

Watch terminology.............................................................................10

The chronograph................................................................................11

Watch button functions .....................................................................12

Watch case buttons ..........................................................................12

Setting buttons.................................................................................13

To Set Watch functions..................................................................13

Viewing buttons ...............................................................................14

Watch display icons............................................................................15

Starting the Bodylink® System........................................................16

Viewing Performance Data................................................................17

1

589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page CVR4

Vertical Mode functions ...................................................................31

To operate Vertical Mode...............................................................32

To view performance data in Vertical Mode.................................32

Vertical Mode example.....................................................................33

Finish Mode........................................................................................34

Finish Mode functions .....................................................................34

To set Finish Mode.........................................................................35

To view performance data in Finish Mode...................................35

Finish Mode example.......................................................................36

Navigate Mode ...................................................................................37

Navigate Mode terminology ............................................................37

Navigate Mode functions.................................................................38

To operate Navigate Mode.............................................................38

To store waypoints in Navigate Mode ..........................................38

To view performance data in Navigate Mode ..............................39

Navigate Mode example...................................................................40

Waypoints Mode .................................................................................40

Waypoints Mode terminology..........................................................40

Waypoints Mode functions ..............................................................41

To operate Waypoints Mode ..........................................................42

To store a waypoint........................................................................42

To view or edit waypoints..............................................................43

3

Watch messages..................................................................................19

Display formatting .............................................................................20

Watch modes ......................................................................................20

Using the Watch.................................................................................21

Performance Watch Modes .................................................................22

Time of Day Mode..............................................................................22

Time of Day Mode terminology.......................................................22

Time of Day Mode functions ...........................................................22

To set time of day...........................................................................23

To switch time zones......................................................................24

To synchronize Time of Day with Fitness sensors ......................24

To view performance data in Time of Day Mode.........................25

Time of Day Mode example.............................................................26

Chronograph Mode ............................................................................27

Chronograph Mode terminology .....................................................27

Chronograph Mode functions..........................................................27

To operate Chronograph Mode manually.....................................28

To operate Chronograph Mode hands-free...................................29

To view performance data in Chronograph Mode .......................29

Chronograph Mode example ...........................................................30

Vertical Mode......................................................................................31

Vertical Mode terminology ..............................................................31

2

589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 2

Alarm Mode functions .....................................................................58

To set an alarm in Alarm Mode ....................................................59

Configure Mode..................................................................................60

Configure Mode terminology...........................................................60

Configure Mode setting groups.......................................................60

To set functions in Configure Mode .............................................61

Configure Mode options...................................................................62

HRM settings .................................................................................62

GPS-3D Sensor Settings................................................................64

Altitude settings.............................................................................65

Hands-Free settings.......................................................................66

Watch settings ................................................................................67

Unit settings...................................................................................68

Care & Maintenance ...........................................................................69

Changing the battery.........................................................................69

INDIGLO® night-light......................................................................71

Water resistance.................................................................................71

Legal Information................................................................................72

International warranty (U.S. limited warranty)..............................72

Service.................................................................................................75

FCC notice (United States)/IC notice (Canada)...............................75

Declaration of conformity..................................................................78

5

To operate the Track Back feature...............................................44

Waypoints Mode example ................................................................46

Lap Data Mode...................................................................................46

Lap Data Mode functions ................................................................47

To operate Lap Data ......................................................................47

To view performance data in Lap Data Mode..............................47

Lap Data Mode example ..................................................................48

Summary Mode ..................................................................................49

Summary Mode terminology...........................................................49

Summary Mode functions ...............................................................49

To operate Summary Mode ...........................................................50

To reset Features in Summary Mode ...........................................50

To view performance data in Summary Mode .............................50

Summary Mode example .................................................................53

Timer Mode ........................................................................................54

Timer Mode terminology.................................................................54

Timer Mode functions .....................................................................54

To set Timer Mode.........................................................................55

To operate the Timer in Timer Mode...........................................55

To view performance data in Timer Mode ...................................57

Timer Mode example .......................................................................57

Alarm Mode ........................................................................................58

4

589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 4

I N T R O D U C T I O N

Welcome!

Congratulations! With your purchase of the Timex® Bodylink®

System you have hired your new personal coach. Using your

Performance Watch in partnership with the Heart Rate and Speed

+ Distance Sensors offers you an unprecedented ability to track,

store, and analyze several key indicators of your personal fitness

level.

We dedicate this manual to information regarding your Performance

Watch. This sport Watch functions as the brain for your Bodylink

System, providing you comprehensive, real-time workout data

gathered from the Heart Rate Sensor, Speed + Distance Sensor, or

both.

You will find your Performance Watch provides you with very user-

friendly fitness technology. But, like any new technology, you should

take the time to familiarize yourself with it to optimize the

usefulness of your purchase.

So, have fun exploring! Review the Performance Watch modes. Use

the Quick Start Guide to give you a baseline knowledge of the

Bodylink System. Most of all, enjoy your new fitness partner on

your road to increased performance!

76

589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 6

9

Manual organization

This manual contains information about, and instructions for,

setting up your new Performance Watch and using it with the

Bodylink Fitness Sensors as part of the coordinated Bodylink

System.

To assist you in learning about your Performance Watch, this

manual contains several key elements to increase your

understanding, including:

❖

An overview of the Performance Watch buttons, display icons, and

modes.

❖

A glossary for each section that explains many of the references

used for the Performance Watch and the Performance Watch

modes.

❖

Complete, comprehensive instructions for setting up and using

your Performance Watch in each mode.

❖

A primer covering the links between your Performance Watch and

each of the Fitness Sensors in each mode.

❖

Real-world scenarios that explain how you might use your

Performance Watch as part of your activity routine. You will see

these scenarios throughout the manual, appearing in grey text

boxes.

8

Resources

Print resources

In addition to this manual, your Bodylink System includes these

valuable resources:

❖

Bodylink® System Quick Start Guide: Information to help

you set up and begin using your Performance Watch in

conjunction with your Fitness Sensors, and an overview map of

the different Performance Watch modes.

❖

Fitness Sensors User Guide: Information for set-up,

operation, and maintenance of your Speed + Distance and

Heart Rate Sensors.

Web resources

The Timex Websites offer beneficial information to help you

optimize your Bodylink System. These sites include:

❖ www.timex.com/bodylink/: Information about Bodylink

System features and product simulations.

❖ www.timex.com/software/: Current software releases for

Timex products.

❖

www.timex.com/fitness/: Fitness and training tips for using

the Bodylink System.

589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 8

GPS: The GPS-3D Sensor uses information gathered from global

positioning satellites (GPS) to calculate your speed, distance, and

elevation, and to track your movements.

Heart Rate Sensor: The Heart Rate Sensor (HR Sensor)

measures your heart rate. The Fitness Sensor User Guide

provides detailed information for setting up and using your HR

Sensor.

The chronograph

As you use this manual to learn about your Watch, the word

chronograph can potentially cause some confusion. Try to remember

this: a chronograph is a tool for measuring time. So, you will

notice a Chronograph Mode, but Vertical and Finish Modes also

operate from the chronograph. Any time your Watch functions as a

timing tool, it operates using chronograph (or timing) functionality.

chronograph

measures time

Chronograph

Mode

Vertical Mode

Finish Mode

11

P E R F O R M A N C E W A T C H O V E R V I E W

Watch terminology

The following terms appear throughout this manual. Knowing these

terms will provide you a greater understanding of the information

provided.

Bodylink® System: The Bodylink System allows you to track real-

time data by using Fitness Sensors in conjunction with your

Performance Watch.

Fitness Sensors: The Bodylink System includes two digital

sensors: the Heart Rate Sensor and the Speed + Distance Sensor.

Performance Watch: The Performance Watch, (Watch) houses the

data center for the Bodylink System.

Speed + Distance Sensor: The Speed + Distance Sensor (GPS-

3D Sensor) tracks speed, pace, distance traveled, altitude, location,

and more, using GPS based technology. The Fitness Sensor User

Guide provides detailed instructions for setting up and using your

GPS-3D Sensor.

10

589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 10

Setting buttons

Watch buttons also set Watch functions (for example, setting the

time or a target heart rate zone). When the

+ and - symbols

appear on the Watch display, you have initiated the setting process.

TO SET WATCH FUNCTIONS

Use the following steps to set Watch functions:

1. Press and hold SELECT (SET/FORMAT). The message

HOLD TO SET may appear.

2. Continue pressing SELECT (SET/FORMAT) until SET

briefly appears on the display, followed by a flashing value.

3. Set the first value by pressing

+ (DISPLAY) or -

(STOP/RESET).

DONE

Press when finished

setting

INDIGLO®

night-light

Press to light

the watch

+

Press to increase the

displayed value

SELECT

Press to begin setting or

move to the next value

-

Press to decrease the

displayed value

13

Watch button functions

The buttons on your Watch are multi-functional, serving three

purposes. You do not have to memorize button functions for each

mode. Let the Watch serve as your guide.

Watch case buttons

Most of the time, the Watch buttons function according to the

labels printed on the case. If you do not see any of symbols on the

display, follow the information printed on the Watch case to guide

you in using the buttons.

MODE

Press to go to

the next mode

START/SPLIT

Press to start timing or

take a split

INDIGLO

®

night-light

Press to light

the watch

DISPLAY

Press to display

performance data

SET/FORMAT

Press to set or change

the display format

STOP/RESET

Press to stop or press

and hold to reset

12

589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 12

1514

Watch display icons

Timer running

Chronograph

running

Night Mode enabled

GPS-3D Sensor

battery low

Sensor(s) activated

(blinks when trouble)

Alarm armed

Hourly chime

enabled

Watch display

icons

4. When you reach the desired value, press SELECT

(SET/FORMAT) to move to the next value.

5. Repeat steps 3 and 4 for each value you want to set.

6. When you have adjusted all values, press DONE (MODE) to

return to the main display of the mode.

Viewing buttons

Finally, buttons help you navigate through viewing options. When

you see the ▲ and ▼ triangles on the display, you know there is

information to view.

MODE

Press to go to the

next mode

INDIGLO®

night-light

Press to light

the watch

▲

Press to display next

data value

▼

Press to display

previous data value

589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 14

Starting the Bodylink® System

When using the Performance Monitor, you can view real-time data

from a Heart Rate Sensor or Speed + Distance Sensor, or both, in

Time of Day, Chrono and Timer. The procedure to do this is the

same in all modes, though the data that you can view and their

position on the display in each mode will vary.

1. Make sure you’re wearing your Heart Rate Sensor or Speed +

Distance Sensor, or both, and that they are powered up and

functional.

2. Stand at least 6 feet (2 meters) away from any other users of

fitness monitor systems and from any source of radio interference

such as electrical equipment, power lines, etc.

3. Press and release the DISPLAY button. This tells the watch to

look for any Bodylink

®

sensors nearby; it will search for one

minute. The antenna icon will appear on the watch display,

indicating that the Bodylink

®

system is active.

16

NOTE: Though the Bodylink

®

system has a working range of

about 3 feet (1 meter) from the sensors to the watch, for the most

reliable operation, make sure that the watch is as close to the

sensors as possible when starting the system up.

4. When the watch has successfully detected transmissions from the

sensors, the watch display will switch to a new format showing

some or all of the sensor data, depending on the mode. Time of

Day and Timer show the data in the lower line exclusively, while

Chrono allows up to three lines of performance data.

Viewing Performance Data

Press and release the DISPLAY button to select the data or

combination of data that you wish to view during your workout. For

your convenience, a “banner” showing the names of the information

and their position on the display is shown briefly before showing the

data itself.

Here are a few more things you should know to use the watch

effectively:

• While in the Chrono, press and release SET/FORMAT to swap

the positions of the information in the upper and middle display

lines. This allows you to view the data most important in the

larger middle display line.

17

NOTE: As a convenience, Chrono and Timer will automatically

search for Bodylink

®

sensors for fifteen seconds upon entering

the mode.

589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 16

Watch messages

When using the Watch with the Fitness Sensors, the Watch may

display messages to communicate the status of the Sensor in

conjunction with the Watch. Messages include:

❖

SEARCHING The GPS-3D Sensor is still trying to link to GPS

data. You cannot view speed, pace, distance, or positional

information until the Sensor locates GPS satellites.

❖

WEAK GPS SIGNAL The GPS-3D Sensor lost its link with GPS

satellites. The GPS-3D Sensor operates more accurately in more

open areas (such as an area without a lot of tree or cloud cover)

and at quicker speeds.

❖

NO DATA FROM HRM (GPS) The Watch is not receiving data

from the HR or the GPS-3D Sensor. Ensure that the Sensor is not

more than 3 feet (1 meter) away from the Watch, is operating, or

has not inadvertently locked onto someone else’s Sensor. The

Watch will attempt to establish a connection for one minute after

this message displays.

❖

NOISY DATA FROM HRM (GPS) The Watch is experiencing

radio interference. Try to move away from any potential sources

of interference (for example, televisions, monitors, or motorized

devices). The Watch will attempt to establish a connection for 30

seconds after this message displays.

❖

FATAL GPS ERROR The GPS-3D Sensor has encountered a

severe internal error. Contact Timex Customer Service.

19

• If you want to stop monitoring data from your Bodylink

®

sensors,

hold the DISPLAY button down until the message HOLD TO

SHUT OFF RCVR is displayed on the watch display. Continue

holding the DISPLAY button for a few more seconds; the watch

will beep indicating that the radio link between the watch and the

sensors has been shut down.

18

TIP: If you are already viewing data from one sensor, for example,

the Heart Rate Sensor, and you wish to also view data from the

Speed + Distance Sensor, simply press and hold the DISPLAY

button until the watch emits a short beep and the antenna icon

begins flashing. The watch is now searching for a second

Bodylink

®

sensor. When it detects this second device, the antenna

icon will stop flashing and the display may change to a new

format that includes the new information. Press and release the

DISPLAY button (as detailed previously) to view various

combinations of two sensor’s data.

589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 18

❖

Waypoints support up to ten reference points as you travel from

one location to another and uses these reference points to help

you travel back to your beginning location.

❖

Lap Data presents stored lap information.

❖

Summary displays data recorded while the chronograph runs.

❖

Timer enables you to time an event that counts down from a

specific time to zero.

❖

Alarm manages up to five alarms.

❖

Configure permits you to customize Watch functions to meet

your needs.

Using the Watch

To access all features and functionality of your Watch, you must use

it in conjunction with the Fitness Sensors. However, your Watch

does offer some flexibility of use. For example:

❖

You can use your Watch without either of the Fitness Sensors to

view time Time of Day Mode, as an alarm in Alarm Mode, or to

time a workout in any of the chronograph modes.

❖

You can use your Watch with only the HR Sensor in any of the

chronograph modes to track heart rate and time information.

❖

You can use your Watch with the GPS-3D Sensor in any of the

navigational modes to track distance information. Or, you can use

this Sensor in any of the chronograph modes to track distance

information.

21

Display formatting

In Chronograph, Vertical (with the exception of ascent rate

information), Finish, and Navigate Modes, you can press and release

SET/FORMAT to switch the display reading positions in the upper

and middle display lines.

Watch modes

You can cycle through each of the 11 modes by pressing MODE.

The modes include:

❖

Time of Day allows you to display the time, date, and day of the

week for two different time zones.

❖

Chronograph tracks and displays performance data.

❖

Vertical applies a view for vertical data such as ascent rate,

altitude, and elevation.

❖

Finish lets you predict a time for a specified distance and set

alerts if you are off pace.

❖

Navigate recognizes positional, compass-type information for

your location.

Pace

Time

Pace

Time

20

589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 20

23

P E R F O R M A N C E W A T C H M O D E S

Time of Day Mode

Time of Day Mode terminology

UTC: Universal Time, Coordinated (formerly known as GMT)

describes the local time zone in relationship to the Greenwich

Meridian. For example, New York City is in the -5 UTC zone, since

New York is five hours earlier than Greenwich Meridian; Moscow

is +3 UTC, since it is three hours later than Greenwich Meridian.

Time of Day Mode functions

Your Watch can act as an ordinary watch to display the time, date,

and day for two different time zones, using a 12- or 24-hour

format.

View performance

data

View or switch to

secondary time

Hold to set

INDIGLO®

night-light

To Chronograph

Mode

22

You can return to Time of Day Mode from any other mode on the

Watch by pressing and holding MODE until the time of day

displays.

TO SET TIME OF DAY

For instructions on setting Watch functions, including Time of

Day, refer to page 13, “To set Watch functions.”

For Time of Day, you can set the following values:

NOTE: You cannot adjust seconds. When you use the Watch with

the GPS-3D Sensor, it will align with UTC.

When switching between Standard Time and Daylight

Savings Time, manually adjust the hour.

You can set the Watch slightly ahead or behind current

time. For example, if you typically arrive ten minutes

late, set the Watch ten minutes ahead. The Watch

remains ahead of time even when you synchronize it with

the GPS-3D Sensor.

v Hour v Month

v Minute v Date (automatically sets the day of week

when you set the date)

v Year v Hour format (i.e., AM/PM versus 24-hours)

589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 22

After initial use, the Watch will automatically correct any time

inaccuracy upon activation of the GPS-3D Sensor and every 15

minutes thereafter.

TO VIEW PERFORMANCE DATA IN TIME OF DAY MODE

When using Fitness Sensors with your Watch, scroll through

performance data by pressing and releasing DISPLAY.

Performance data viewing options for Time of Day Mode include:

❖

Heart Rate: Current heart rate (requires HR Sensor).

❖

Speed: Current velocity (requires GPS-3D Sensor).

❖

Pace: Current velocity, expressed in minutes per selected

distance unit, such as miles or kilometers (requires GPS-3D

Sensor).

❖

Distance: Distance traveled since the activation of the GPS-3D

Sensor (requires GPS-3D Sensor).

Performance data

Press to view

performance data

25

TO SWITCH TIME ZONES

The Watch can track two time zones (T1 and T2). Look at the

other zone by pressing START/SPLIT. Or, switch from T1 to T2

using these steps:

1. Press and hold START/SPLIT until HOLD FOR TIME 2

displays.

2. Continue to hold until the time switches and the Watch beeps.

3. Repeat steps 1 and 2 to switch back to T1. The message will

read HOLD FOR TIME 1.

You must independently set the time of day for each time zone.

TO SYNCHRONIZE TIME OF DAY WITH FITNESS SENSORS

When you first activate the GPS-3D Sensor in conjunction with

your Watch, you can expect one of the following scenarios:

❖

If you activate the GPS-3D Sensor before setting the time of

day, the Watch will synchronize both T1 and T2 with UTC. You

will need to adjust the hour for both time zones to your local

time.

❖

If you activate the GPS-3D Sensor after setting the time of day,

the Watch maintains the hour and date settings and

synchronizes minutes and seconds to UTC for each time zone.

24

589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 24

Chronograph Mode

Chronograph Mode terminology

Chronograph: The chronograph records time segments for the

duration of your activity.

Lap: Lap time records the time for one segment of your activity.

Split: Split time records the total elapsed time since the beginning

of your current activity.

Taking a split: When you take a split, the chronograph will

complete timing one lap and begin timing a new one.

Chronograph Mode functions

Chronograph Mode operates as the main workout data center for

your Watch. It can record elapsed time for up to 100 hours. It can

also register information for up to 100 laps, including data for

speed, pace, and distance (using the GPS-3D Sensor); and average

heart rate (using the HR Sensor).

View performance

data

Swap upper and

middle lines

Stop or reset the

chronograph

INDIGLO®

night-light

Start timing or

take a split

To Vertical Mode

or hold for time

27

❖

Altitude: Current elevation above sea level (requires GPS-3D

Sensor).

NOTE: If the Watch does not detect either Fitness Sensor, the

day of the week shows on the bottom line of the display.

You can continue viewing the day of the week while using

the Fitness Sensors by hiding performance data (for data

hiding information, see “Watch settings” on page 67). If

you choose Day of Week, it will appear as though the

Watch does not receive any data.

Time of Day Mode example

Assume that you live in San Francisco and work with a client in

Singapore. Like all busy people, it is imperative you keep track

of time, so you set T1 to your local time. But it is also important

to have a quick reminder of your client's time, so you set T2 to

Singapore time. With both time zones available, you can quickly

check your client's time or even switch your monitor to display

T2 when you travel to Singapore.

26

589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 26

TO OPERATE CHRONOGRAPH MODE HANDS-FREE

You can set Chronograph Mode to start when you begin moving

and to stop when you stop moving or to automatically take splits

based on either distance or elapsed time. See “Hands-free

settings” on page 66.

TO VIEW PERFORMANCE DATA IN CHRONOGRAPH MODE

When using Fitness Sensors with your Watch, scroll through

performance data by pressing and releasing DISPLAY.

Performance data viewing options for Chronograph Mode include:

❖

Heart Rate: Current heart rate (requires HR Sensor).

❖

Speed: Current velocity (requires GPS-3D Sensor).

❖

Average Speed: Average velocity for the period that

chronograph has been running (requires GPS-3D Sensor).

❖

Pace: Current velocity, expressed in minutes per selected

distance unit, such as miles or kilometers (requires GPS-3D

Sensor).

❖

Average Pace: Average per-minute speed for the period that

chronograph has been running (requires GPS-3D Sensor).

❖

Distance: Distance traveled since the chronograph was started

(requires GPS-3D Sensor).

❖

Altitude: Current height above sea level (requires GPS-3D

Sensor).

29

NOTE: Press MODE to switch the Watch display to any other

mode while the chronograph continues to run. The

stopwatch icon will appear to indicate the chronograph

is still functioning.

TO OPERATE CHRONOGRAPH MODE MANUALLY

1. Press MODE until Chronograph Mode appears.

2. Press START/SPLIT to begin timing.

3. Press START/SPLIT again to take a split and automatically

begin timing a new lap.

The Watch stores lap and split information and displays

average statistics for the lap if you are using the Fitness

Sensors.

4. Press MODE to immediately display new lap information

OR

Wait for a few seconds and the Watch will automatically begin

to display data for a new lap.

5. Press STOP/RESET to stop timing when you reach the end

of your activity.

6. Press START/SPLIT to continue timing.

OR

Press and hold STOP/RESET to reset the chronograph

display to zero.

28

589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 28

Vertical Mode

Vertical Mode terminology

Ascent rate: How quickly you climb or descend.

Vertical speed: Another term for ascent rate.

Vertical Mode functions

Vertical Mode operates as a viewing mode in conjunction with the

GPS-3D Sensor with a focus on displaying altitudinal data. In

particular, Vertical Mode tailors the Watch to view data related to

vertical activities (for example, climbing or skiing).

NOTE: If you do not use the GPS-3D Sensor, Vertical Mode

operates identically to Chronograph Mode, displaying only

time and lap information.

View performance

data

Swap upper and

middle lines

Stop or reset the

chronograph

INDIGLO®

night-light

Start lap or take a

split

To Finish Mode

or hold for time

31

❖

Elevation: Difference between your current altitude and the

altitude when you started the chronograph (requires GPS-3D

Sensor).

Chronograph Mode example

Assume that you run regularly, and you want to gain information

about your current workout routine so that you can set fitness

goals for yourself. You use Chronograph Mode to record lap time

for each of the three stages of your workout. When you finish

your workout, use the lap information to determine distance and

pace, both per lap and as a total of all three laps. If you ran uphill

for part of your workout, you can also determine your elevation

to learn how far you climbed. With your current fitness level in

mind, you can then set realistic fitness goals for yourself and

monitor your progress on a regular basis.

30

589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 30

❖

Distance: Distance traveled since the GPS-3D Sensor was

started (requires GPS-3D Sensor).

❖

Altitude: Current height above sea level (requires GPS-3D

Sensor).

❖

Elevation: Difference between your current altitude and the

altitude when you started the chronograph (requires GPS-3D

Sensor).

Vertical Mode example

You are heli-skiing in Banff on a run estimated at 2,700 vertical

feet (214 vertical meters). Curious about the accuracy of the

estimate as well as how long it will take you to make your run,

you start your GPS-3D Sensor, navigate to Vertical Mode and

press START as you take off down the mountain. At the end of

your run, you press STOP and then DISPLAY until you see

Ascent Rate and Elevation (expressed in a negative number since

you traveled downhill). Use this information to see how fast you

skiied and compare the Watch’s expressed elevation to your

guide’s estimate.

33

TO OPERATE VERTICAL MODE

1. Press MODE until Vertical Mode appears.

2. Press START/SPLIT to begin timing.

3. Press START/SPLIT again to take a split and automatically

begin timing a new lap.

4. Press STOP/RESET to stop timing when you reach the end

of your activity.

5. Press START/SPLIT to continue timing.

OR

Press and hold STOP/RESET again to reset the display to

zero.

TO VIEW PERFORMANCE DATA IN VERTICAL MODE

When using Fitness Sensors with your Watch, scroll through

performance data by pressing and releasing DISPLAY.

Performance data viewing options for Vertical Mode include:

❖

Heart Rate: Current heart rate (requires HR Sensor).

❖

Ascent Rate: Vertical speed (requires GPS-3D Sensor).

❖

Pace: Current velocity, expressed in minutes per selected

distance unit, such as miles or kilometers (requires GPS-3D

Sensor).

❖

Speed: Current velocity (requires GPS-3D Sensor).

32

589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 32

35

Finish Mode

Finish Mode functions

Finish Mode allows you to predict how much time it will take you

to finish a specified distance based on current GPS-3D Sensor

data. To help you stay on pace for your predicted finish, you can

also set the Watch to alert you if you are moving either too quickly

or too slowly for your desired pace.

NOTE: If you do not use the GPS-3D Sensor, Finish Mode

operates identically to Chronograph Mode, displaying only

time and lap information.

You must reset the chronograph to zero prior to operating

Finish Mode or it will not operate properly.

View performance

data

Stop timing

INDIGLO®

night-light

Start timing or

take a split.

To Navigate Mode

or hold for time

34

TO SET FINISH MODE

For instructions on setting Watch functions, including Finish

Mode, refer to page 13, “To set Watch functions.”

For Finish Mode, you can set the following values:

❖

Pre-set or custom distance [(for custom set the distance (up to

999.99) and the unit (NM, KM, or MI)]

❖

Target time

❖

Alert option (an audible alert will cause the Watch to both beep

and flash the predicted finish time and a silent alert will only

flash the predicted finish time)

TO VIEW PERFORMANCE DATA IN FINISH MODE

When using Fitness Sensors with your Watch, scroll through

performance data by pressing and releasing DISPLAY.

Performance data viewing options for Finish Mode include:

❖

Finish Time: The predicted finish time based on your current

speed and distance. The finish time will flash if you move

slower or quicker than your predicted finish time. If you stop

moving, the Watch replaces the finish time with STOPPED.

(requires GPS-3D Sensor)

❖

Pace: Current velocity, expressed in minutes per selected

distance unit, such as miles or kilometers (requires GPS-3D

Sensor).

589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 34

Navigate Mode

Navigate Mode terminology

Waypoints: A point between the beginning and ending point on a

route. Waypoints serve as landmarks during an activity that you

can use to help you find your way from your ending point back to

your beginning point.

Heading: The direction you are traveling in relation to North.

The Watch includes a numeric heading display in Navigate Mode.

NOTE: In Configure Mode, you can set your Watch to read True

North (the geographic North Pole where all longitude lines

meet) or Magnetic North (North in alignment with the

earth's magnetic field). See “Unit settings” on page 68

for more information.

Store current

position as a

waypoint

To Waypoints Mode

or hold for time

View performance

data

INDIGLO®

night-light

37

❖

Average Pace: Average per-minute speed for the period that

chronograph has been running (requires GPS-3D Sensor).

❖

Distance: Distance traveled since the chronograph was started

(requires GPS-3D Sensor).

❖

Speed: Current velocity (requires GPS-3D Sensor).

❖

Average Speed: Average velocity for the period that the

chronograph has been running (requires GPS-3D Sensor).

❖

Heart Rate: Current heart rate (requires HR Sensor).

Finish Mode example

You are training for a 100 KM bicycle race. Last year you rode in

the same race and finished in 4 hours, 15 minutes. This year your

goal is to finish in less than 4 hours. You read in a training

magazine that when training for a race, you should devote one

day a week to riding at a distance equal to your event working

toward your goal time. To help keep you on pace, you set Finish

Mode to 100 KM for a distance and 4 hours for a time. You set

the Watch to alert you audibly when you go slower than your

pace to help keep you on track as you ride.

36

589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 36

La pagina sta caricando ...

Timex Ironman Bodylink Trail Runner Guida utente

Timex Ironman Bodylink Trail Runner Guida utente

in altre lingue

Documenti correlati

Altri documenti