Timex Ironman Bodylink Trail Runner Guida utente

Categoria
Orologi sportivi
Tipo
Guida utente
W-188 589-095006 NA
p e r f o r m a n c e w a t c h u s e r g u i d e
Performance Watch User Guide
English page 1
Français page 81
Español página 159
Português página 239
BODYLINK SYSTEM
®
©2005 Timex Corporation
589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page CVR2
T A B L E O F C O N T E N T S
Register your product at www.timex.com
Introduction...........................................................................................7
Welcome! ...............................................................................................7
Manual organization............................................................................8
Resources..............................................................................................9
Print resources ...................................................................................9
Web resources.....................................................................................9
Performance Watch Overview ............................................................10
Watch terminology.............................................................................10
The chronograph................................................................................11
Watch button functions .....................................................................12
Watch case buttons ..........................................................................12
Setting buttons.................................................................................13
To Set Watch functions..................................................................13
Viewing buttons ...............................................................................14
Watch display icons............................................................................15
Starting the Bodylink® System........................................................16
Viewing Performance Data................................................................17
1
589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page CVR4
Vertical Mode functions ...................................................................31
To operate Vertical Mode...............................................................32
To view performance data in Vertical Mode.................................32
Vertical Mode example.....................................................................33
Finish Mode........................................................................................34
Finish Mode functions .....................................................................34
To set Finish Mode.........................................................................35
To view performance data in Finish Mode...................................35
Finish Mode example.......................................................................36
Navigate Mode ...................................................................................37
Navigate Mode terminology ............................................................37
Navigate Mode functions.................................................................38
To operate Navigate Mode.............................................................38
To store waypoints in Navigate Mode ..........................................38
To view performance data in Navigate Mode ..............................39
Navigate Mode example...................................................................40
Waypoints Mode .................................................................................40
Waypoints Mode terminology..........................................................40
Waypoints Mode functions ..............................................................41
To operate Waypoints Mode ..........................................................42
To store a waypoint........................................................................42
To view or edit waypoints..............................................................43
3
Watch messages..................................................................................19
Display formatting .............................................................................20
Watch modes ......................................................................................20
Using the Watch.................................................................................21
Performance Watch Modes .................................................................22
Time of Day Mode..............................................................................22
Time of Day Mode terminology.......................................................22
Time of Day Mode functions ...........................................................22
To set time of day...........................................................................23
To switch time zones......................................................................24
To synchronize Time of Day with Fitness sensors ......................24
To view performance data in Time of Day Mode.........................25
Time of Day Mode example.............................................................26
Chronograph Mode ............................................................................27
Chronograph Mode terminology .....................................................27
Chronograph Mode functions..........................................................27
To operate Chronograph Mode manually.....................................28
To operate Chronograph Mode hands-free...................................29
To view performance data in Chronograph Mode .......................29
Chronograph Mode example ...........................................................30
Vertical Mode......................................................................................31
Vertical Mode terminology ..............................................................31
2
589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 2
Alarm Mode functions .....................................................................58
To set an alarm in Alarm Mode ....................................................59
Configure Mode..................................................................................60
Configure Mode terminology...........................................................60
Configure Mode setting groups.......................................................60
To set functions in Configure Mode .............................................61
Configure Mode options...................................................................62
HRM settings .................................................................................62
GPS-3D Sensor Settings................................................................64
Altitude settings.............................................................................65
Hands-Free settings.......................................................................66
Watch settings ................................................................................67
Unit settings...................................................................................68
Care & Maintenance ...........................................................................69
Changing the battery.........................................................................69
INDIGLO® night-light......................................................................71
Water resistance.................................................................................71
Legal Information................................................................................72
International warranty (U.S. limited warranty)..............................72
Service.................................................................................................75
FCC notice (United States)/IC notice (Canada)...............................75
Declaration of conformity..................................................................78
5
To operate the Track Back feature...............................................44
Waypoints Mode example ................................................................46
Lap Data Mode...................................................................................46
Lap Data Mode functions ................................................................47
To operate Lap Data ......................................................................47
To view performance data in Lap Data Mode..............................47
Lap Data Mode example ..................................................................48
Summary Mode ..................................................................................49
Summary Mode terminology...........................................................49
Summary Mode functions ...............................................................49
To operate Summary Mode ...........................................................50
To reset Features in Summary Mode ...........................................50
To view performance data in Summary Mode .............................50
Summary Mode example .................................................................53
Timer Mode ........................................................................................54
Timer Mode terminology.................................................................54
Timer Mode functions .....................................................................54
To set Timer Mode.........................................................................55
To operate the Timer in Timer Mode...........................................55
To view performance data in Timer Mode ...................................57
Timer Mode example .......................................................................57
Alarm Mode ........................................................................................58
4
589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 4
I N T R O D U C T I O N
Welcome!
Congratulations! With your purchase of the Timex® Bodylink®
System you have hired your new personal coach. Using your
Performance Watch in partnership with the Heart Rate and Speed
+ Distance Sensors offers you an unprecedented ability to track,
store, and analyze several key indicators of your personal fitness
level.
We dedicate this manual to information regarding your Performance
Watch. This sport Watch functions as the brain for your Bodylink
System, providing you comprehensive, real-time workout data
gathered from the Heart Rate Sensor, Speed + Distance Sensor, or
both.
You will find your Performance Watch provides you with very user-
friendly fitness technology. But, like any new technology, you should
take the time to familiarize yourself with it to optimize the
usefulness of your purchase.
So, have fun exploring! Review the Performance Watch modes. Use
the Quick Start Guide to give you a baseline knowledge of the
Bodylink System. Most of all, enjoy your new fitness partner on
your road to increased performance!
76
589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 6
9
Manual organization
This manual contains information about, and instructions for,
setting up your new Performance Watch and using it with the
Bodylink Fitness Sensors as part of the coordinated Bodylink
System.
To assist you in learning about your Performance Watch, this
manual contains several key elements to increase your
understanding, including:
An overview of the Performance Watch buttons, display icons, and
modes.
A glossary for each section that explains many of the references
used for the Performance Watch and the Performance Watch
modes.
Complete, comprehensive instructions for setting up and using
your Performance Watch in each mode.
A primer covering the links between your Performance Watch and
each of the Fitness Sensors in each mode.
Real-world scenarios that explain how you might use your
Performance Watch as part of your activity routine. You will see
these scenarios throughout the manual, appearing in grey text
boxes.
8
Resources
Print resources
In addition to this manual, your Bodylink System includes these
valuable resources:
Bodylink® System Quick Start Guide: Information to help
you set up and begin using your Performance Watch in
conjunction with your Fitness Sensors, and an overview map of
the different Performance Watch modes.
Fitness Sensors User Guide: Information for set-up,
operation, and maintenance of your Speed + Distance and
Heart Rate Sensors.
Web resources
The Timex Websites offer beneficial information to help you
optimize your Bodylink System. These sites include:
www.timex.com/bodylink/: Information about Bodylink
System features and product simulations.
www.timex.com/software/: Current software releases for
Timex products.
www.timex.com/fitness/: Fitness and training tips for using
the Bodylink System.
589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 8
GPS: The GPS-3D Sensor uses information gathered from global
positioning satellites (GPS) to calculate your speed, distance, and
elevation, and to track your movements.
Heart Rate Sensor: The Heart Rate Sensor (HR Sensor)
measures your heart rate. The Fitness Sensor User Guide
provides detailed information for setting up and using your HR
Sensor.
The chronograph
As you use this manual to learn about your Watch, the word
chronograph can potentially cause some confusion. Try to remember
this: a chronograph is a tool for measuring time. So, you will
notice a Chronograph Mode, but Vertical and Finish Modes also
operate from the chronograph. Any time your Watch functions as a
timing tool, it operates using chronograph (or timing) functionality.
chronograph
measures time
Chronograph
Mode
Vertical Mode
Finish Mode
11
P E R F O R M A N C E W A T C H O V E R V I E W
Watch terminology
The following terms appear throughout this manual. Knowing these
terms will provide you a greater understanding of the information
provided.
Bodylink® System: The Bodylink System allows you to track real-
time data by using Fitness Sensors in conjunction with your
Performance Watch.
Fitness Sensors: The Bodylink System includes two digital
sensors: the Heart Rate Sensor and the Speed + Distance Sensor.
Performance Watch: The Performance Watch, (Watch) houses the
data center for the Bodylink System.
Speed + Distance Sensor: The Speed + Distance Sensor (GPS-
3D Sensor) tracks speed, pace, distance traveled, altitude, location,
and more, using GPS based technology. The Fitness Sensor User
Guide provides detailed instructions for setting up and using your
GPS-3D Sensor.
10
589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 10
Setting buttons
Watch buttons also set Watch functions (for example, setting the
time or a target heart rate zone). When the
+ and - symbols
appear on the Watch display, you have initiated the setting process.
TO SET WATCH FUNCTIONS
Use the following steps to set Watch functions:
1. Press and hold SELECT (SET/FORMAT). The message
HOLD TO SET may appear.
2. Continue pressing SELECT (SET/FORMAT) until SET
briefly appears on the display, followed by a flashing value.
3. Set the first value by pressing
+ (DISPLAY) or -
(STOP/RESET).
DONE
Press when finished
setting
INDIGLO®
night-light
Press to light
the watch
+
Press to increase the
displayed value
SELECT
Press to begin setting or
move to the next value
-
Press to decrease the
displayed value
13
Watch button functions
The buttons on your Watch are multi-functional, serving three
purposes. You do not have to memorize button functions for each
mode. Let the Watch serve as your guide.
Watch case buttons
Most of the time, the Watch buttons function according to the
labels printed on the case. If you do not see any of symbols on the
display, follow the information printed on the Watch case to guide
you in using the buttons.
MODE
Press to go to
the next mode
START/SPLIT
Press to start timing or
take a split
INDIGLO
®
night-light
Press to light
the watch
DISPLAY
Press to display
performance data
SET/FORMAT
Press to set or change
the display format
STOP/RESET
Press to stop or press
and hold to reset
12
589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 12
1514
Watch display icons
Timer running
Chronograph
running
Night Mode enabled
GPS-3D Sensor
battery low
Sensor(s) activated
(blinks when trouble)
Alarm armed
Hourly chime
enabled
Watch display
icons
4. When you reach the desired value, press SELECT
(SET/FORMAT) to move to the next value.
5. Repeat steps 3 and 4 for each value you want to set.
6. When you have adjusted all values, press DONE (MODE) to
return to the main display of the mode.
Viewing buttons
Finally, buttons help you navigate through viewing options. When
you see the and triangles on the display, you know there is
information to view.
MODE
Press to go to the
next mode
INDIGLO®
night-light
Press to light
the watch
Press to display next
data value
Press to display
previous data value
589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 14
Starting the Bodylink® System
When using the Performance Monitor, you can view real-time data
from a Heart Rate Sensor or Speed + Distance Sensor, or both, in
Time of Day, Chrono and Timer. The procedure to do this is the
same in all modes, though the data that you can view and their
position on the display in each mode will vary.
1. Make sure you’re wearing your Heart Rate Sensor or Speed +
Distance Sensor, or both, and that they are powered up and
functional.
2. Stand at least 6 feet (2 meters) away from any other users of
fitness monitor systems and from any source of radio interference
such as electrical equipment, power lines, etc.
3. Press and release the DISPLAY button. This tells the watch to
look for any Bodylink
®
sensors nearby; it will search for one
minute. The antenna icon will appear on the watch display,
indicating that the Bodylink
®
system is active.
16
NOTE: Though the Bodylink
®
system has a working range of
about 3 feet (1 meter) from the sensors to the watch, for the most
reliable operation, make sure that the watch is as close to the
sensors as possible when starting the system up.
4. When the watch has successfully detected transmissions from the
sensors, the watch display will switch to a new format showing
some or all of the sensor data, depending on the mode. Time of
Day and Timer show the data in the lower line exclusively, while
Chrono allows up to three lines of performance data.
Viewing Performance Data
Press and release the DISPLAY button to select the data or
combination of data that you wish to view during your workout. For
your convenience, a “banner” showing the names of the information
and their position on the display is shown briefly before showing the
data itself.
Here are a few more things you should know to use the watch
effectively:
• While in the Chrono, press and release SET/FORMAT to swap
the positions of the information in the upper and middle display
lines. This allows you to view the data most important in the
larger middle display line.
17
NOTE: As a convenience, Chrono and Timer will automatically
search for Bodylink
®
sensors for fifteen seconds upon entering
the mode.
589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 16
Watch messages
When using the Watch with the Fitness Sensors, the Watch may
display messages to communicate the status of the Sensor in
conjunction with the Watch. Messages include:
SEARCHING The GPS-3D Sensor is still trying to link to GPS
data. You cannot view speed, pace, distance, or positional
information until the Sensor locates GPS satellites.
WEAK GPS SIGNAL The GPS-3D Sensor lost its link with GPS
satellites. The GPS-3D Sensor operates more accurately in more
open areas (such as an area without a lot of tree or cloud cover)
and at quicker speeds.
NO DATA FROM HRM (GPS) The Watch is not receiving data
from the HR or the GPS-3D Sensor. Ensure that the Sensor is not
more than 3 feet (1 meter) away from the Watch, is operating, or
has not inadvertently locked onto someone else’s Sensor. The
Watch will attempt to establish a connection for one minute after
this message displays.
NOISY DATA FROM HRM (GPS) The Watch is experiencing
radio interference. Try to move away from any potential sources
of interference (for example, televisions, monitors, or motorized
devices). The Watch will attempt to establish a connection for 30
seconds after this message displays.
FATAL GPS ERROR The GPS-3D Sensor has encountered a
severe internal error. Contact Timex Customer Service.
19
• If you want to stop monitoring data from your Bodylink
®
sensors,
hold the DISPLAY button down until the message HOLD TO
SHUT OFF RCVR is displayed on the watch display. Continue
holding the DISPLAY button for a few more seconds; the watch
will beep indicating that the radio link between the watch and the
sensors has been shut down.
18
TIP: If you are already viewing data from one sensor, for example,
the Heart Rate Sensor, and you wish to also view data from the
Speed + Distance Sensor, simply press and hold the DISPLAY
button until the watch emits a short beep and the antenna icon
begins flashing. The watch is now searching for a second
Bodylink
®
sensor. When it detects this second device, the antenna
icon will stop flashing and the display may change to a new
format that includes the new information. Press and release the
DISPLAY button (as detailed previously) to view various
combinations of two sensor’s data.
589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 18
Waypoints support up to ten reference points as you travel from
one location to another and uses these reference points to help
you travel back to your beginning location.
Lap Data presents stored lap information.
Summary displays data recorded while the chronograph runs.
Timer enables you to time an event that counts down from a
specific time to zero.
Alarm manages up to five alarms.
Configure permits you to customize Watch functions to meet
your needs.
Using the Watch
To access all features and functionality of your Watch, you must use
it in conjunction with the Fitness Sensors. However, your Watch
does offer some flexibility of use. For example:
You can use your Watch without either of the Fitness Sensors to
view time Time of Day Mode, as an alarm in Alarm Mode, or to
time a workout in any of the chronograph modes.
You can use your Watch with only the HR Sensor in any of the
chronograph modes to track heart rate and time information.
You can use your Watch with the GPS-3D Sensor in any of the
navigational modes to track distance information. Or, you can use
this Sensor in any of the chronograph modes to track distance
information.
21
Display formatting
In Chronograph, Vertical (with the exception of ascent rate
information), Finish, and Navigate Modes, you can press and release
SET/FORMAT to switch the display reading positions in the upper
and middle display lines.
Watch modes
You can cycle through each of the 11 modes by pressing MODE.
The modes include:
Time of Day allows you to display the time, date, and day of the
week for two different time zones.
Chronograph tracks and displays performance data.
Vertical applies a view for vertical data such as ascent rate,
altitude, and elevation.
Finish lets you predict a time for a specified distance and set
alerts if you are off pace.
Navigate recognizes positional, compass-type information for
your location.
Pace
Time
Pace
Time
20
589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 20
23
P E R F O R M A N C E W A T C H M O D E S
Time of Day Mode
Time of Day Mode terminology
UTC: Universal Time, Coordinated (formerly known as GMT)
describes the local time zone in relationship to the Greenwich
Meridian. For example, New York City is in the -5 UTC zone, since
New York is five hours earlier than Greenwich Meridian; Moscow
is +3 UTC, since it is three hours later than Greenwich Meridian.
Time of Day Mode functions
Your Watch can act as an ordinary watch to display the time, date,
and day for two different time zones, using a 12- or 24-hour
format.
View performance
data
View or switch to
secondary time
Hold to set
INDIGLO®
night-light
To Chronograph
Mode
22
You can return to Time of Day Mode from any other mode on the
Watch by pressing and holding MODE until the time of day
displays.
TO SET TIME OF DAY
For instructions on setting Watch functions, including Time of
Day, refer to page 13, “To set Watch functions.”
For Time of Day, you can set the following values:
NOTE: You cannot adjust seconds. When you use the Watch with
the GPS-3D Sensor, it will align with UTC.
When switching between Standard Time and Daylight
Savings Time, manually adjust the hour.
You can set the Watch slightly ahead or behind current
time. For example, if you typically arrive ten minutes
late, set the Watch ten minutes ahead. The Watch
remains ahead of time even when you synchronize it with
the GPS-3D Sensor.
v Hour v Month
v Minute v Date (automatically sets the day of week
when you set the date)
v Year v Hour format (i.e., AM/PM versus 24-hours)
589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 22
After initial use, the Watch will automatically correct any time
inaccuracy upon activation of the GPS-3D Sensor and every 15
minutes thereafter.
TO VIEW PERFORMANCE DATA IN TIME OF DAY MODE
When using Fitness Sensors with your Watch, scroll through
performance data by pressing and releasing DISPLAY.
Performance data viewing options for Time of Day Mode include:
Heart Rate: Current heart rate (requires HR Sensor).
Speed: Current velocity (requires GPS-3D Sensor).
Pace: Current velocity, expressed in minutes per selected
distance unit, such as miles or kilometers (requires GPS-3D
Sensor).
Distance: Distance traveled since the activation of the GPS-3D
Sensor (requires GPS-3D Sensor).
Performance data
Press to view
performance data
25
TO SWITCH TIME ZONES
The Watch can track two time zones (T1 and T2). Look at the
other zone by pressing START/SPLIT. Or, switch from T1 to T2
using these steps:
1. Press and hold START/SPLIT until HOLD FOR TIME 2
displays.
2. Continue to hold until the time switches and the Watch beeps.
3. Repeat steps 1 and 2 to switch back to T1. The message will
read HOLD FOR TIME 1.
You must independently set the time of day for each time zone.
TO SYNCHRONIZE TIME OF DAY WITH FITNESS SENSORS
When you first activate the GPS-3D Sensor in conjunction with
your Watch, you can expect one of the following scenarios:
If you activate the GPS-3D Sensor before setting the time of
day, the Watch will synchronize both T1 and T2 with UTC. You
will need to adjust the hour for both time zones to your local
time.
If you activate the GPS-3D Sensor after setting the time of day,
the Watch maintains the hour and date settings and
synchronizes minutes and seconds to UTC for each time zone.
24
589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 24
Chronograph Mode
Chronograph Mode terminology
Chronograph: The chronograph records time segments for the
duration of your activity.
Lap: Lap time records the time for one segment of your activity.
Split: Split time records the total elapsed time since the beginning
of your current activity.
Taking a split: When you take a split, the chronograph will
complete timing one lap and begin timing a new one.
Chronograph Mode functions
Chronograph Mode operates as the main workout data center for
your Watch. It can record elapsed time for up to 100 hours. It can
also register information for up to 100 laps, including data for
speed, pace, and distance (using the GPS-3D Sensor); and average
heart rate (using the HR Sensor).
View performance
data
Swap upper and
middle lines
Stop or reset the
chronograph
INDIGLO®
night-light
Start timing or
take a split
To Vertical Mode
or hold for time
27
Altitude: Current elevation above sea level (requires GPS-3D
Sensor).
NOTE: If the Watch does not detect either Fitness Sensor, the
day of the week shows on the bottom line of the display.
You can continue viewing the day of the week while using
the Fitness Sensors by hiding performance data (for data
hiding information, see “Watch settings” on page 67). If
you choose Day of Week, it will appear as though the
Watch does not receive any data.
Time of Day Mode example
Assume that you live in San Francisco and work with a client in
Singapore. Like all busy people, it is imperative you keep track
of time, so you set T1 to your local time. But it is also important
to have a quick reminder of your client's time, so you set T2 to
Singapore time. With both time zones available, you can quickly
check your client's time or even switch your monitor to display
T2 when you travel to Singapore.
26
589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 26
TO OPERATE CHRONOGRAPH MODE HANDS-FREE
You can set Chronograph Mode to start when you begin moving
and to stop when you stop moving or to automatically take splits
based on either distance or elapsed time. See “Hands-free
settings” on page 66.
TO VIEW PERFORMANCE DATA IN CHRONOGRAPH MODE
When using Fitness Sensors with your Watch, scroll through
performance data by pressing and releasing DISPLAY.
Performance data viewing options for Chronograph Mode include:
Heart Rate: Current heart rate (requires HR Sensor).
Speed: Current velocity (requires GPS-3D Sensor).
Average Speed: Average velocity for the period that
chronograph has been running (requires GPS-3D Sensor).
Pace: Current velocity, expressed in minutes per selected
distance unit, such as miles or kilometers (requires GPS-3D
Sensor).
Average Pace: Average per-minute speed for the period that
chronograph has been running (requires GPS-3D Sensor).
Distance: Distance traveled since the chronograph was started
(requires GPS-3D Sensor).
Altitude: Current height above sea level (requires GPS-3D
Sensor).
29
NOTE: Press MODE to switch the Watch display to any other
mode while the chronograph continues to run. The
stopwatch icon will appear to indicate the chronograph
is still functioning.
TO OPERATE CHRONOGRAPH MODE MANUALLY
1. Press MODE until Chronograph Mode appears.
2. Press START/SPLIT to begin timing.
3. Press START/SPLIT again to take a split and automatically
begin timing a new lap.
The Watch stores lap and split information and displays
average statistics for the lap if you are using the Fitness
Sensors.
4. Press MODE to immediately display new lap information
OR
Wait for a few seconds and the Watch will automatically begin
to display data for a new lap.
5. Press STOP/RESET to stop timing when you reach the end
of your activity.
6. Press START/SPLIT to continue timing.
OR
Press and hold STOP/RESET to reset the chronograph
display to zero.
28
589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 28
Vertical Mode
Vertical Mode terminology
Ascent rate: How quickly you climb or descend.
Vertical speed: Another term for ascent rate.
Vertical Mode functions
Vertical Mode operates as a viewing mode in conjunction with the
GPS-3D Sensor with a focus on displaying altitudinal data. In
particular, Vertical Mode tailors the Watch to view data related to
vertical activities (for example, climbing or skiing).
NOTE: If you do not use the GPS-3D Sensor, Vertical Mode
operates identically to Chronograph Mode, displaying only
time and lap information.
View performance
data
Swap upper and
middle lines
Stop or reset the
chronograph
INDIGLO®
night-light
Start lap or take a
split
To Finish Mode
or hold for time
31
Elevation: Difference between your current altitude and the
altitude when you started the chronograph (requires GPS-3D
Sensor).
Chronograph Mode example
Assume that you run regularly, and you want to gain information
about your current workout routine so that you can set fitness
goals for yourself. You use Chronograph Mode to record lap time
for each of the three stages of your workout. When you finish
your workout, use the lap information to determine distance and
pace, both per lap and as a total of all three laps. If you ran uphill
for part of your workout, you can also determine your elevation
to learn how far you climbed. With your current fitness level in
mind, you can then set realistic fitness goals for yourself and
monitor your progress on a regular basis.
30
589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 30
Distance: Distance traveled since the GPS-3D Sensor was
started (requires GPS-3D Sensor).
Altitude: Current height above sea level (requires GPS-3D
Sensor).
Elevation: Difference between your current altitude and the
altitude when you started the chronograph (requires GPS-3D
Sensor).
Vertical Mode example
You are heli-skiing in Banff on a run estimated at 2,700 vertical
feet (214 vertical meters). Curious about the accuracy of the
estimate as well as how long it will take you to make your run,
you start your GPS-3D Sensor, navigate to Vertical Mode and
press START as you take off down the mountain. At the end of
your run, you press STOP and then DISPLAY until you see
Ascent Rate and Elevation (expressed in a negative number since
you traveled downhill). Use this information to see how fast you
skiied and compare the Watch’s expressed elevation to your
guide’s estimate.
33
TO OPERATE VERTICAL MODE
1. Press MODE until Vertical Mode appears.
2. Press START/SPLIT to begin timing.
3. Press START/SPLIT again to take a split and automatically
begin timing a new lap.
4. Press STOP/RESET to stop timing when you reach the end
of your activity.
5. Press START/SPLIT to continue timing.
OR
Press and hold STOP/RESET again to reset the display to
zero.
TO VIEW PERFORMANCE DATA IN VERTICAL MODE
When using Fitness Sensors with your Watch, scroll through
performance data by pressing and releasing DISPLAY.
Performance data viewing options for Vertical Mode include:
Heart Rate: Current heart rate (requires HR Sensor).
Ascent Rate: Vertical speed (requires GPS-3D Sensor).
Pace: Current velocity, expressed in minutes per selected
distance unit, such as miles or kilometers (requires GPS-3D
Sensor).
Speed: Current velocity (requires GPS-3D Sensor).
32
589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 32
35
Finish Mode
Finish Mode functions
Finish Mode allows you to predict how much time it will take you
to finish a specified distance based on current GPS-3D Sensor
data. To help you stay on pace for your predicted finish, you can
also set the Watch to alert you if you are moving either too quickly
or too slowly for your desired pace.
NOTE: If you do not use the GPS-3D Sensor, Finish Mode
operates identically to Chronograph Mode, displaying only
time and lap information.
You must reset the chronograph to zero prior to operating
Finish Mode or it will not operate properly.
View performance
data
Stop timing
INDIGLO®
night-light
Start timing or
take a split.
To Navigate Mode
or hold for time
34
TO SET FINISH MODE
For instructions on setting Watch functions, including Finish
Mode, refer to page 13, “To set Watch functions.”
For Finish Mode, you can set the following values:
Pre-set or custom distance [(for custom set the distance (up to
999.99) and the unit (NM, KM, or MI)]
Target time
Alert option (an audible alert will cause the Watch to both beep
and flash the predicted finish time and a silent alert will only
flash the predicted finish time)
TO VIEW PERFORMANCE DATA IN FINISH MODE
When using Fitness Sensors with your Watch, scroll through
performance data by pressing and releasing DISPLAY.
Performance data viewing options for Finish Mode include:
Finish Time: The predicted finish time based on your current
speed and distance. The finish time will flash if you move
slower or quicker than your predicted finish time. If you stop
moving, the Watch replaces the finish time with STOPPED.
(requires GPS-3D Sensor)
Pace: Current velocity, expressed in minutes per selected
distance unit, such as miles or kilometers (requires GPS-3D
Sensor).
589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 34
Navigate Mode
Navigate Mode terminology
Waypoints: A point between the beginning and ending point on a
route. Waypoints serve as landmarks during an activity that you
can use to help you find your way from your ending point back to
your beginning point.
Heading: The direction you are traveling in relation to North.
The Watch includes a numeric heading display in Navigate Mode.
NOTE: In Configure Mode, you can set your Watch to read True
North (the geographic North Pole where all longitude lines
meet) or Magnetic North (North in alignment with the
earth's magnetic field). See “Unit settings” on page 68
for more information.
Store current
position as a
waypoint
To Waypoints Mode
or hold for time
View performance
data
INDIGLO®
night-light
37
Average Pace: Average per-minute speed for the period that
chronograph has been running (requires GPS-3D Sensor).
Distance: Distance traveled since the chronograph was started
(requires GPS-3D Sensor).
Speed: Current velocity (requires GPS-3D Sensor).
Average Speed: Average velocity for the period that the
chronograph has been running (requires GPS-3D Sensor).
Heart Rate: Current heart rate (requires HR Sensor).
Finish Mode example
You are training for a 100 KM bicycle race. Last year you rode in
the same race and finished in 4 hours, 15 minutes. This year your
goal is to finish in less than 4 hours. You read in a training
magazine that when training for a race, you should devote one
day a week to riding at a distance equal to your event working
toward your goal time. To help keep you on pace, you set Finish
Mode to 100 KM for a distance and 4 hours for a time. You set
the Watch to alert you audibly when you go slower than your
pace to help keep you on track as you ride.
36
589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 36
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175

Timex Ironman Bodylink Trail Runner Guida utente

Categoria
Orologi sportivi
Tipo
Guida utente