AEG HG995440XB Manuale utente

Categoria
Riscaldatori di spazio
Tipo
Manuale utente
HG995440XB EN User manual 2
IT Istruzioni per l’uso 16
CONTENTS
1. SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3. PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4. DAILY USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
5. HELPFUL HINTS AND TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6. CARE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
7. TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
8. INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
9. TECHNICAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you impeccable
performance for many years, with innovative technologies that help make life simpler –
features you might not find on ordinary appliances. Please spend a few minutes reading to get
the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com
Register your product for better service:
www.aeg.com/productregistration
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available.
The information can be found on the rating plate. Model, PNC, Serial Number.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
2
www.aeg.com
1. SAFETY INFORMATION
Before the installation and use of the appliance, careful-
ly read the supplied instructions. The manufacturer is
not responsible if an incorrect installation and use cau-
ses injuries and damages. Always keep the instructions
with the appliance for future reference.
1.1 Children and vulnerable people safety
WARNING!
Risk of suffocation, injury or permanent disability.
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they are supervised by an adult or a
person who is responsible for their safety.
Do not let children play with the appliance.
Keep all packaging away from children.
Keep children and pets away from the appliance
when it operates or when it cools down. Accessible
parts are hot.
If the appliance has a child safety device, we recom-
mend that you activate it.
Cleaning and user maintenance shall not be made by
children without supervision.
1.2 General Safety
The appliance and its accessible parts become hot
during use. Do not touch the heating elements.
Do not operate the appliance by means of an exter-
nal timer or separate remote-control system.
Unattended cooking on a hob with fat or oil can be
dangerous and may result in fire.
ENGLISH 3
Never try to extinguish a fire with water, but switch off
the appliance and then cover flame e.g. with a lid or a
fire blanket.
Do not store items on the cooking surfaces.
Do not use a steam cleaner to clean the appliance.
Metallic objects such as knives, forks, spoons and lids
should not be placed on the hob surface since they
can get hot.
If the glass ceramic surface is cracked, switch off the
appliance to avoid the possibility of electric shock.
2.
SAFETY INSTRUCTIONS
This appliance is suitable for the
following markets: IT
ZA
2.1 Installation
WARNING!
Only a qualified person must in-
stall this appliance.
Remove all the packaging.
Do not install or use a damaged appli-
ance.
Obey the installation instruction sup-
plied with the appliance.
Keep the minimum distance from the
other appliances and units.
Always be careful when you move the
appliance because it is heavy. Always
wear safety gloves.
Seal the cut surfaces with a sealant to
prevent moisture to cause swelling.
Protect the bottom of the appliance
from steam and moisture.
Do not install the appliance adjacent
to a door or under a window. This pre-
vents hot cookware to fall from the ap-
pliance when the door or the window
is opened.
If the appliance is installed above
drawers make sure that the space, be-
tween the bottom of the appliance
and the upper drawer, is sufficient for
air circulation.
The bottom of the appliance can get
hot. We recommend to install a non-
combustile separation panel under the
appliance to prevent access to the
bottom.
Electrical connection
WARNING!
Risk of fire and electrical shock.
All electrical connections must be
made by a qualified electrician.
The appliance must be earthed.
Before carrying out any operation
make sure that the appliance is dis-
connected from the power supply.
Use the correct electricity mains cable.
Do not let the electricity mains cable
tangle.
Make sure the mains cable or plug (if
applicable) does not touch the hot ap-
pliance or hot cookware, when you
connect the appliance to the near
sockets
Make sure the appliance is installed
correctly. Loose and incorrect electrici-
ty mains cable or plug (if applicable)
can make the terminal become too
hot.
Make sure that a shock protection is
installed.
Use the strain relief clamp on cable.
4
www.aeg.com
Make sure not to cause damage to the
mains plug (if applicable) or to the
mains cable. Contact the Service or an
electrician to change a damaged
mains cable.
The electrical installation must have an
isolation device which lets you discon-
nect the appliance from the mains at
all poles. The isolation device must
have a contact opening width of mini-
mum 3 mm.
Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
Gas connection
All gas connections should be made
by a qualified person.
Before installation, make sure that the
local distribution conditions (nature of
the gas and gas pressure) and the ad-
justment of the appliance are compat-
ible.
Make sure that there is air circulation
around the appliance.
The information about the gas supply
is on the rating plate.
This appliance is not connected to a
device, which evacuates the products
of combustion. Make sure to connect
the appliance according to current in-
stallation regulations. Pay attention to
requirements regarding adequate
ventilation.
2.2 Use
WARNING!
Risk of injury, burns or electric
shock.
Remove all the packaging, labelling
and protective film (if applicable) be-
fore first use.
Use this appliance in a household en-
vironment.
Do not change the specification of this
appliance.
Do not let the appliance stay unatten-
ded during operation.
Do not operate the appliance with wet
hands or when it has contact with wa-
ter.
Do not put cutlery or saucepan lids on
the cooking zones. They become hot.
Set the cooking zone to “off” after
use.
Do not use the appliance as a work
surface or as a storage surface.
If the surface of the appliance is
cracked, disconnect immediately the
appliance from the power supply. This
to prevent an electrical shock.
When you place food into hot oil, it
may splash.
WARNING!
Risk of fire or explosion.
Fats and oil when heated can release
flammable vapours. Keep flames or
heated objects away from fats and oils
when you cook with them.
The vapours that very hot oil releases
can cause spontaneous combustion.
Used oil, that can contain food rem-
nants, can cause fire at a lower tem-
perature than oil used for the first
time.
Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
WARNING!
Risk of damage to the appliance.
Do not keep hot cookware on the con-
trol panel.
Do not let cookware to boil dry.
Be careful not to let objects or cook-
ware fall on the appliance. The surface
can be damaged.
Do not activate the cooking zones
with empty cookware or without cook-
ware.
Do not put aluminium foil on the ap-
pliance.
Cookware made of cast iron, alumini-
um or with a damaged bottom can
cause scratches on the glass or glass
ceramic. Always lift these objects up
when you have to move them on the
cooking surface.
This appliance is for cooking purposes
only. Do not use the appliance for oth-
er purposes, as for example room
heating.
ENGLISH 5
The use of a gas cooking appliance re-
sults in the production of heat and
moisture. Provide good ventilation in
the room where the appliance is instal-
led.
Make sure that the ventilation open-
ings are not blocked.
Prolonged intensive use of the appli-
ance may call for additional ventila-
tion, for example opening of a win-
dow, or more effective ventilation, for
example increasing the level of me-
chanical ventilation where present.
Use only stable cookware with the cor-
rect shape and diameter larger than
the dimensions of the burners. There
is a risk of overheating and rupture of
the glass plate (if applicable).
Make sure the flame does not go out
when you quickly turn the knob from
the maximum to the minimum posi-
tion.
Make sure pots are centrally posi-
tioned on the rings and do not stick
out over edges of the cooking surface.
Use only the accessories supplied with
the appliance.
Do not install a flame diffuser on the
burner.
2.3 Care and Cleaning
WARNING!
Risk of damage to the appliance.
Clean regularly the appliance to pre-
vent the deterioration of the surface
material.
Do not use water spray and steam to
clean the appliance.
Do not clean the burners in the dish-
washer.
Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use abrasive products, abrasive
cleaning pads, solvents or metal ob-
jects.
2.4 Disposal
WARNING!
Risk of injury or suffocation.
Contact your municipal authority for
information on how to discard the ap-
pliance correctly.
Disconnect the appliance from the
mains supply.
Cut off the mains cable and discard it.
Flat the external gas pipes.
3. PRODUCT DESCRIPTION
3.1 Cooking surface layout
1 2 3 4 5
6
1
Semi-rapid burner
2
Auxiliary burner
3
Triple Crown burner
4
Semi-rapid burner
5
Semi-rapid burner
6
Control knobs
6
www.aeg.com
3.2 Control knobs
Symbol Description
no gas supply / off po-
sition
ignition position /
maximum gas supply
Symbol Description
minimum gas supply
4. DAILY USE
WARNING!
Refer to the Safety chapters.
4.1 Ignition of the burner
WARNING!
Be very careful when you use
open fire in kitchen environment.
Manufacturer decline any re-
sponsibility in case of misuse of
the flame
Always light the burner before
you put cookware.
Lightning the burner:
1.
Push the control knob down and
turn it counterclockwise to the maxi-
mum position (
).
2.
Keep the control knob pushed for
equal or less than 10 seconds to let
the thermocouple warm up. If not,
the gas supply will be interrupted.
3.
Adjust the flame after it is regular.
If the burner does not light after
some tries, check if the crown
and its cap are in correct posi-
tions.
Each control knob has a pilot
light. It lights up when you turn
the control knob.
A
B
C
A)
Burner cap and crown
B)
Thermocouple
C)
Ignition candle
C
D
B
A
A)
Burner cap
B)
Burner crown
C)
Ignition candle
D)
Thermocouple
ENGLISH 7
WARNING!
Do not keep the control knob
pushed for more than 15 sec-
onds.
If the burner does not light after
15 seconds, release the control
knob, turn it into off position and
try to light the burner again after
minimum 1 minute.
In the absence of electricity you
can ignite the burner without
electrical device; in this case ap-
proach the burner with a flame,
push the relevant knob down
and turn it counter-clockwise to
maximum gas release position.
If the burner accidentally goes
out, turn the control knob to the
off position and try to light the
burner again after minimum 1 mi-
nute.
The spark generator can start au-
tomatically when you switch on
the mains, after installation or a
power cut. It is normal.
4.2 Turning the burner off
To put the flame out, turn the knob to
the symbol
.
WARNING!
Always turn the flame down or
switch it off before you remove
the pans from the burner.
5. HELPFUL HINTS AND TIPS
WARNING!
Refer to the Safety chapters.
5.1 Energy savings
If possible, always put the lids on the
pans.
When the liquid starts to boil, turn
down the flame to barely simmer the
liquid.
WARNING!
Use cookware with diameters ap-
plicable to the size of burners.
Burner Diameters
of cookware
Triple Crown 180 - 260 mm
Semi-rapid (rear left) 120 - 240 mm
Semi-rapid (rear
right)
120 - 240 mm
Semi-rapid (front
right)
120 - 220 mm
Auxiliary 80 - 180 mm
WARNING!
Do not use cast iron pans, pot-
stones, grill or toaster plates on
gas burners.
WARNING!
Make sure that the bottoms of
pots do not stand above the con-
trol knobs. If the control knobs
are under the bottoms of pots,
the flame heats them up.
Do not put the same pan on two
burners.
WARNING!
Make sure that pot handles is not
above the front edge of the
cooktop. Make sure that pots are
centrally put on the rings in order
to get maximum stability and to
get lower gas consumption.
8
www.aeg.com
Do not put unstable or damaged pots
on the rings to prevent from spill and in-
jury.
WARNING!
Do not use a flame diffuser.
WARNING!
Liquids spilt during cooking can
cause the glass to break
6. CARE AND CLEANING
WARNING!
Refer to the Safety chapters.
WARNING!
Deactivate the appliance and let
it cool down before you clean it.
Disconnect the appliance from
the electrical supply before you
do cleaning or maintenance
work.
Scratches or dark stains on the
surface have no effect on how
the appliance operates.
You can remove the pan supports to
easily clean the hob.
To clean the enamelled parts, cap and
crown, wash them with warm soapy
water and dry them carefully before
you put them back.
Wash stainless steel parts with water,
and then dry them with a soft cloth.
•The pan supports are not dishwasher
proof. They must be washed by hand.
The enamel coating occasionally can
have rough edges, so be careful when
you wash the pan supports by hand
and dry them. If necessary, remove
stubborn stains with a paste cleaner.
Make sure you position the pan sup-
ports correctly after cleaning.
To make the burners work correctly,
make sure that the arms of the pan
supports are in the centre of the burn-
er.
Be very careful when you replace
the pan supports to prevent the hob
top from damage.
After cleaning, dry the appliance with a
soft cloth.
Removing the dirt:
1.
Remove immediately: melting
plastic, plastic foil, and food con-
taining sugar.
Stop the appliance and let it
cool down before you clean: lime-
scale rings, water rings, fat stains,
shiny metallic discolorations. Use a
special cleaner applicable for sur-
face of hob.
2.
Clean the appliance with a damp
cloth and some detergent.
3.
At the end rub the appliance dry
with a clean cloth.
WARNING!
Do not use knives, scrapers or
similar instruments to clean the
surface of the glass or between
the rims of the burners and the
frame (if applicable).
WARNING!
Do not slide cookware over the
glass because it could scratch
the surface. Also, do not let hard
or sharp objects fall onto the
glass or hit the edge of the hob.
6.1 Cleaning of the spark plug
This feature is obtained through a ce-
ramic ignition candle with a metal elec-
trode. Keep these components well
clean to prevent difficult lighting and
check that the burner crown holes are
not obstructed.
6.2 Periodic maintenance
Periodically speak your local Service
Force Centre to check the conditions of
the gas supply pipe and the pressure ad-
juster, if fitted.
ENGLISH 9
7. TROUBLESHOOTING
Problem Possible cause Remedy
There is no spark when
lighting the gas
There is no electrical
supply
Make sure that the
unit is connected and
the electrical supply is
switched on.
Control the fuse. If the
fuse is released more
than one time, refer to
a qualified electrician.
•Burner cap and crown
are placed uneven
Make sure that the
burner cap and crown
are in correct posi-
tions.
The flame is blow out im-
mediately after ignition
Thermocouple is not
heated sufficient
After lightning the
flame, keep the knob
pushed for equal or
less than 10 seconds.
The gas ring burns un-
evenly
Burner crown is
blocked with food resi-
dues
Make sure that the in-
jector is not blocked
and the burner crown
is clear of food parti-
cles.
If there is a fault, first try to find a solu-
tion to the problem yourself. If you can-
not find a solution to the problem your-
self, speak your dealer or the local Serv-
ice Force Centre.
If you operated the appliance in-
correctly, or the installation was
not carried out by a registered
engineer, the visit from the cus-
tomer service technician or deal-
er may not take place free of
charge, even during the warranty
period.
These data are necessary to help you
quickly and correctly. These data are
available on the supplied rating plate.
Model description .................
Product number (PNC) .................
Serial Number (S.N.) .................
Use the original spare parts only. They
are available at Service Force Centre and
approved spare parts shops.
7.1 Labels supplied with the
accessories bag
Stick the adhesive labels as indicated
below:
10
www.aeg.com
MOD.
PROD.NO.
SER.NO
DATA
MOD.
PROD.NO.
SER.NO
DATA
MODELMODEL
MOD.
PROD.NO.
SER.NO.
03 IT
MADE IN ITALY
TYPE
230V-50Hz
IP20
0049
A B C
A)
Stick it on Guarantee Card and send
this part (if applicable)
B)
Stick it on Guarantee Card and keep
this part (if applicable)
C)
Stick it on instruction booklet
8. INSTALLATION
WARNING!
Refer to the Safety chapters.
WARNING!
The following instructions about
installation, connection and
maintenance must be carried out
by qualified personnel in compli-
ance with standards and local
regulations in force.
8.1 Gas Connection
Choose fixed connections or use a flexi-
ble pipe in stainless steel in compliance
with the regulation in force. If you use
flexible metallic pipes, be careful they
do not come in touch with mobile parts
or they are not squeezed. Also be care-
ful when the hob is put together with an
oven.
Make sure that the gas supply
pressure of the appliance obeys
the recommended values. The
adjustable connection is fixed to
the comprehensive ramp by
means of a threaded nut G 1/2".
Screw the parts without force,
adjust the connection in the nec-
essary direction and tighten ev-
erything.
ABC
A)
End of shaft with nut
B)
Washer
C)
Elbow
ENGLISH 11
Liquid gas
Use the rubber pipe holder for liquid
gas. Always engage the gasket. Then
continue with the gas connection.
The flexible pipe is prepared for apply
when:
it can not get hot more than room
temperature, higher than 30°C;
it is no longer than 1500 mm;
it shows no throttles;
it is not subject to traction or torsion;
it does not get in touch with cutting
edges or corners;
it can be easily examined in order to
make sure its condition.
The control of preservation of the flexi-
ble pipe consists in checking that:
it does not show cracks, cuts, marks of
burnings on the two ends and on its
full length;
the material is not hardened, but
shows its correct elasticity;
the fastening clamps are not rusted;
expired term is not due.
If one or more defects are visible, do not
repair the pipe, but replace it.
When installation is complete,
make sure that the seal of each
pipe fitting is correct. Use a
soapy solution, not a flame!
8.2 Injectors replacement
1.
Remove the pan supports.
2.
Remove the caps and crowns of the
burner.
3.
With a socket spanner 7 remove the
injectors and replace them with the
ones which are necessary for the
type of gas you use (see table in
"Technical Information" chapter).
4.
Assemble the parts, follow the same
procedure backwards.
5.
Replace the rating plate (it is near
the gas supply pipe) with the one for
the new type of gas supply. You can
find this plate in the package sup-
plied with the appliance.
If the supply gas pressure is changeable
or different from the necessary pressure,
you must fit an applicable pressure ad-
juster on the gas supply pipe.
8.3 Adjustment of minimum
level
To adjust the minimum level of the burn-
ers:
1.
Light the burner.
2.
Turn the knob on the minimum posi-
tion.
3.
Remove the knob.
4.
With a thin screwdriver, adjust the
by-pass screw position.
A
A)
The by-pass screw
If you change from natural gas G20 20
mbar to liquid gas, fully tighten the
by-pass screw in.
If you change from liquid gas to natu-
ral gas G20 20 mbar, undo the by-pass
screw approximately 1/4 of a turn (1/2
of a turn for Triple Crown burner).
WARNING!
Make sure the flame does not go
out when you quickly turn the
knob from the maximum position
to the minimum position.
8.4 Electrical connection
Make sure that the rated voltage and
type of power on the rating plate
agree with the voltage and the power
of the local power supply.
This appliance is supplied with a mains
cable. It has to be supplied with a cor-
rect plug which can hold the load that
the rating plate rates. Make sure that
you install the plug in a correct socket.
Always use a correctly installed shock-
proof socket.
Make sure that there is an access to
the mains plug after the installation.
Do not pull the mains cable to discon-
nect the appliance. Always pull the
mains plug.
12
www.aeg.com
There is a risk of fire when the appli-
ance is in connection with an exten-
sion cable, an adapter or a multiple
connection. Make sure that the
ground connection agrees with the
standards and regulations.
Do not let the power cable to heat up
to a temperature higher than 90° C.
Make sure that you connect the blue
neutral cable to the terminal with a letter
"N" on it. Connect the brown (or black)
phase cable to the terminal which has a
letter "L". Keep the phase cable connec-
ted at all times.
8.5 Replacement of the
connection cable
To replace the connection cable use on-
ly H05V2V2-F T90 or equivalent type.
Make sure that the cable section is appli-
cable to the voltage and the working
temperature. The yellow/green earth
wire must be approximately 2 cm longer
than the brown (or black) phase wire.
8.6 Building In
min. 45 mm
min. 650 mm
880 mm
min. 450 mm
40 mm
490 mm
+2
0
+2
0
A
A - supplied brackets
CAUTION!
Install the appliance only on a
worktop with flat surface.
8.7 Possibilities for insertion
Kitchen unit with door
The panel installed below the hob must
be easy to remove and let an easy ac-
cess in case a technical assistance inter-
vention is necessary.
min 20 mm
(max 150 mm)
30 mm
60 mm
B
A
A)
Removable panel
B)
Space for connections
Kitchen unit with oven
The electrical connection of the hob and
the oven must be installed separately for
safety reasons and to let easy remove
oven from the unit.
ENGLISH 13
9. TECHNICAL INFORMATION
Hob dimensions
Width: 896 mm
Length: 516 mm
Hob recess dimensions
Width: 880 (0 / +2) mm
Length: 490 (0 / +2) mm
Heat input
Triple Crown burner: 3.8 kW
Semi-Rapid burner: 1.9 kW
Auxiliary burner: 1.0 kW
TOTAL POWER: G20 (2H) 20 mbar = 10.5 kW
G30 (3+) 28–30 mbar = 763 g/h
G31 (3+) 37 mbar = 750 g/h
Electric supply: 230 V ~ 50 Hz
Category: II2H3+
Gas connection: G 1/2
Gas supply: G20 (2H) 20 mbar
Appliance class: 3
By-pass diameters
Burner Ø By-pass in
1/100 mm
Burner Ø By-pass in
1/100 mm
Auxiliary 28 Triple Crown 56
Semi-rapid 32
Gas burners for NATURAL GAS G20 20 mbar
BURNER NORMAL POWER kW inj. 1/100 mm
Auxiliary 1.0 70
Semi-rapid 1.9 96
Triple Crown 3.8 146
Gas burners for LPG (Butane / Propane) G30/G31 28-30/37 mbar
BURNER
NORMAL
POWER
kW
inj. 1/100
mm
G30
28-30
mbar
G31
37 mbar
g/h g/h
Auxiliary 1.0 50 73 71
Semi-rapid 1.9 71 138 136
Triple Crown 3.8 98 276 271
14
www.aeg.com
10. ENVIRONMENT CONCERNS
Recycle the materials with the
symbol
. Put the packaging in
applicable containers to recycle it.
Help protect the environment and
human health and to recycle waste
of electrical and electronic
appliances. Do not dispose
appliances marked with the symbol
with the household waste. Return the
product to your local recycling
facility or contact your municipal
office.
ENGLISH 15
INDICE
1. INFORMAZIONI PER LA SICUREZZA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2. ISTRUZIONI DI SICUREZZA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
3. DESCRIZIONE DEL PRODOTTO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
4. UTILIZZO QUOTIDIANO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
5. CONSIGLI E SUGGERIMENTI UTILI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
6. PULIZIA E CURA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
7. RISOLUZIONE DEI PROBLEMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
8. INSTALLAZIONE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
9. DATI TECNICI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
PER RISULTATI PERFETTI
Grazie per aver scelto di acquistare questo prodotto AEG. Lo abbiamo creato per fornirvi
prestazioni impeccabili per molti anni, grazie a tecnologie innovative che vi semplificheranno
la vita - funzioni che non troverete sui normali elettrodomestici. Vi invitiamo di dedicare
qualche minuto alla lettura per sapere come trarre il massimo dal vostro elettrodomestico.
Visitate il nostro sito web per:
ricevere consigli, scaricare i nostri opuscoli, eliminare eventuali anomalie, ottenere
informazioni sull'assistenza.
www.aeg.com
registrare il vostro prodotto e ricevere un servizio migliore:
www.aeg.com/productregistration
acquistare accessori, materiali di consumo e ricambi originali per la vostra
apparecchiatura:
www.aeg.com/shop
SERVIZIO CLIENTI E MANUTENZIONE
Consigliamo sempre l’impiego di ricambi originali.
Quando si contatta l'Assistenza, accertarsi di disporre dei seguenti dati.
Le informazioni si trovano sulla targhetta di identificazione. Modello, numero dell'apparecchio
(PNC), numero di serie.
Avvertenza / Attenzione - Importanti Informazioni di Sicurezza
Informazioni e consigli generali
Informazioni in materia di sicurezza ambientale
Con riserva di modifiche.
16
www.aeg.com
1. INFORMAZIONI PER LA SICUREZZA
Leggere attentamente le istruzioni fornite prima di in-
stallare e utilizzare l'apparecchiatura. Il produttore non
è responsabile se un'installazione ed un uso non corret-
to dell'apparecchiatura provocano lesioni e danni. Te-
nere sempre le istruzioni a portata di mano in caso di
necessità durante l'utilizzo.
1.1 Sicurezza dei bambini e delle persone
vulnerabili
AVVERTENZA!
Rischio di soffocamento, lesioni o invalidità perma-
nente.
Questa apparecchiatura può essere usata da bambini
a partire dagli 8 anni e da adulti con limitate capacità
fisiche, sensoriali o mentali o con scarsa esperienza o
conoscenza sull'uso dell'apparecchiatura, se sorve-
gliati o se sono stati istruiti relativamente all'uso del-
l'apparecchiatura e hanno capito i rischi coinvolti.
Non consentire ai bambini di giocare con l'apparec-
chiatura.
Tenere i materiali di imballaggio al di fuori della por-
tata dei bambini.
Tenere i bambini e gli animali domestici lontano dal-
l'apparecchiatura durante il funzionamento o raffred-
damento. Le parti accessibili sono incandescenti.
Se l’apparecchiatura dispone di un dispositivo di sicu-
rezza per i bambini, consigliamo di attivarlo.
La pulizia e gli interventi di manutenzione non devo-
no essere eseguiti dai bambini senza supervisione.
1.2 Avvertenze di sicurezza generali
L'apparecchiatura e le parti accessibili si riscaldano
molto durante l'uso Non toccare le resistenze.
ITALIANO 17
Non utilizzare un timer esterno o un sistema di con-
trollo remoto distinto per mettere in funzione l'appa-
recchiatura.
Non lasciare mai il piano di cottura incustodito duran-
te la preparazione di cibi in quanto olio e grassi po-
trebbero provocare un incendio.
Non tentare mai di spegnere un incendio con dell'ac-
qua; spegnere l'apparecchiatura e coprire le fiamme
ad es. con un coperchio o una coperta di protezione
dal fuoco.
Non conservare nulla sulle superfici di cottura.
Non usare dispositivi per la pulizia a vapore per pulire
l'apparecchiatura.
Oggetti metallici quali coltelli, forchette, cucchiai e
coperchi non dovrebbero essere posti sulla superficie
del piano di cottura in quanto possono diventare cal-
di.
Se la superficie di vetroceramica presenta delle cre-
pe, spegnere l'apparecchiatura per evitare il rischio di
scossa elettrica.
2.
ISTRUZIONI DI SICUREZZA
Questa apparecchiatura è adatta ai
seguenti mercati: IT
ZA
2.1 Installazione
AVVERTENZA!
L’installazione dell'apparecchia-
tura deve essere eseguita da per-
sonale qualificato.
Rimuovere tutti i materiali di imballag-
gio.
Non installare o utilizzare l'apparec-
chiatura se è danneggiata.
Attenersi alle istruzioni fornite insieme
all'apparecchiatura.
È necessario rispettare la distanza mi-
nima dalle altre apparecchiature.
Fare sempre attenzione quando si
sposta l'apparecchiatura, perché è pe-
sante. Indossare sempre guanti di si-
curezza.
Proteggere le superfici di taglio con
un materiale di tenuta per evitare che
l'umidità causi dei rigonfiamenti.
Proteggere la base dell'apparecchia-
tura da vapore e umidità.
Non installare l'apparecchiatura ac-
canto ad una porta o sotto una fine-
stra, per evitare che pentole calde ca-
dano dall'apparecchiatura quando la
porta o la finestra sono aperte.
Se l'apparecchiatura viene installata
sopra dei cassetti, assicurarsi che lo
spazio, tra la base dell'apparecchiatu-
18
www.aeg.com
ra e il cassetto superiore, sia sufficien-
te per il ricircolo d'aria.
La base dell'apparecchiatura può sur-
riscaldarsi. Si consiglia di prevedere un
pannello divisorio in materiale non in-
fiammabile al di sotto dell'apparec-
chiatura per rendere inaccessibile la
base.
Collegamento elettrico
AVVERTENZA!
Rischio di incendio e scossa elet-
trica.
Tutti i collegamenti elettrici devono
essere eseguiti da un elettricista quali-
ficato.
L'apparecchiatura deve disporre di
una messa a terra.
Prima di qualsiasi intervento, è neces-
sario verificare che l'apparecchiatura
sia disinserita dalla rete elettrica.
Utilizzare il cavo di alimentazione ap-
propriato.
Evitare che i collegamenti elettrici si
aggroviglino.
Assicurarsi che il cavo di alimentazione
o la spina (ove prevista) non sfiori l'ap-
parecchiatura calda o pentole calde
quando si collega l'apparecchiatura al-
le prese vicine
Verificare che l'apparecchiatura sia in-
stallata correttamente. Un collega-
mento elettrico o una spia lenti (ove
previsti) potrebbe far diventare il ter-
minale incandescente.
Assicurarsi che la protezione da scosse
elettriche sia installata.
Utilizzare il morsetto fermacavo sul ca-
vo.
Accertarsi di non danneggiare la spina
e il cavo (ove previsti). Contattare il
Centro di Assistenza o un elettricista
qualificato per sostituire un cavo dan-
neggiato.
L'impianto elettrico deve essere dota-
to di un dispositivo di isolamento che
consenta di scollegare l'apparecchia-
tura dalla presa di corrente a tutti i po-
li. Il dispositivo di isolamento deve
avere una larghezza dell'apertura di
contatto non inferiore ai 3 mm.
Servirsi unicamente di dispositivi di
isolamento adeguati: interruttori auto-
matici, fusibili (quelli a tappo devono
essere rimossi dal portafusibile), sgan-
ciatori per correnti di guasto a terra e
relè.
Collegamento gas
Tutti i collegamenti del gas devono
essere eseguiti da una persona qualifi-
cata.
Prima di procedere con l’installazione,
verificare che le condizioni di distribu-
zione locale (pressione e tipo di gas) e
i valori preimpostati dell’apparecchia-
tura siano compatibili.
Adottare le misure necessarie per ga-
rantire una corretta circolazione d'aria
intorno all'apparecchiatura.
Le informazioni relative all'alimenta-
zione del gas si trovano sulla targhetta
dei dati.
La presente apparecchiatura non è
collegata a un dispositivo per l’eva-
cuazione dei residui di combustione.
Assicurarsi di collegare l'apparecchia-
tura conformemente alle disposizioni
vigenti sull'installazione. Fare attenzio-
ne ai requisiti relativi ad un'adeguata
ventilazione.
2.2 Utilizzo
AVVERTENZA!
Rischio di lesioni, scottature o
scosse elettriche.
Rimuovere tutti i materiali di imballag-
gio, le etichette e la pellicola protetti-
va (ove presente) prima del primo uti-
lizzo.
Utilizzare l’apparecchiatura in un am-
biente domestico.
Non apportare modifiche alle specifi-
che di questa apparecchiatura.
Non lasciare mai l'apparecchiatura in-
custodita durante il funzionamento.
Non mettere in funzione l'apparec-
chiatura con le mani umide o quando
c'è un contatto con l'acqua.
Non appoggiare posate o coperchi
sulle zone di cottura. Possono diventa-
re roventi.
Spegnere la zona di cottura dopo ogni
utilizzo.
ITALIANO 19
Non utilizzare l'apparecchiatura come
superficie di lavoro o come piano di
appoggio.
Se la superficie dell'apparecchiatura
presenta delle incrinature, scollegare
immediatamente l'apparecchiatura
dall'alimentazione per evitare scosse
elettriche.
Un alimento immerso nell'olio molto
caldo può provocare degli schizzi.
AVVERTENZA!
Si può verificare un'esplosione o
un incendio.
Grassi e olio caldi possono rilasciare
vapori infiammabili. Mantenere fiam-
me o oggetti caldi lontani da grassi e
olio quando li si utilizza per cucinare.
I vapori rilasciati da un olio molto cal-
do possono provocare una combu-
stione spontanea.
L'olio usato, che può contenere resi-
dui di cibo, può liberare delle fiamme
ad una temperatura inferiore rispetto
ad un olio utilizzato per la prima volta.
Non appoggiare o tenere liquidi o
materiali infiammabili, né oggetti facil-
mente incendiabili sull'apparecchiatu-
ra, al suo interno o nelle immediate vi-
cinanze.
AVVERTENZA!
Vi è il rischio di danneggiare l'ap-
parecchiatura.
Non poggiare pentole calde sul pan-
nello dei comandi.
Non esporre al calore pentole vuote.
Fare attenzione a non lasciar cadere
oggetti o pentole sull'apparecchiatu-
ra. La superficie si potrebbe danneg-
giare.
Non mettere in funzione le zone di
cottura in assenza di pentole o con
pentole vuote.
Non appoggiare la pellicola di allumi-
nio direttamente sull'apparecchiatura.
Lo spostamento di pentole in ghisa, in
alluminio o con fondi danneggiati p
graffiare il vetro o la vetroceramica.
Per spostare questi oggetti sollevarli
sempre dalla superficie di cottura.
L'apparecchiatura è destinata solo alla
cottura. Non utilizzare l'apparecchiatu-
ra per altri scopi come per esempio il
riscaldamento di un ambiente.
Un'apparecchiatura per cottura a gas
produce calore e umidità. Provvedere
ad un'adeguata ventilazione nell'am-
biente in cui si trova l'apparecchiatura.
Assicurarsi che le aperture di ventila-
zione non siano ostruite.
Se si prevede un impiego prolungato
e intenso dell’apparecchiatura, può
essere necessaria un’ulteriore fonte di
aerazione, per esempio l’apertura di
una finestra o un sistema più efficace,
come l’aumento del livello di ventila-
zione meccanica, ove presente.
Utilizzare solo pentole stabili, di forma
corretta e con un diametro superiore
alle dimensioni dei bruciatori. La lastra
di vetro (ove presente) può surriscal-
darsi e rompersi.
Accertarsi che la fiamma non si spen-
ga quando si gira rapidamente la ma-
nopola dalla posizione massima a
quella minima.
Accertarsi che le pentole si trovino al
centro degli anelli e non tocchino i
bordi della superficie di cottura.
Usare esclusivamente gli accessori in
dotazione all'apparecchiatura.
Non utilizzare un diffusore di fiamma
sul bruciatore.
2.3 Pulizia e manutenzione
AVVERTENZA!
Vi è il rischio di danneggiare l'ap-
parecchiatura.
Pulire regolarmente l'apparecchiatura
per evitare il deterioramento dei ma-
teriali che compongono la superficie.
Non nebulizzare acqua né utilizzare
vapore per pulire l'apparecchiatura.
Non pulire i bruciatori in lavastoviglie.
Pulire l'apparecchiatura con un panno
inumidito e morbido. Utilizzare solo
detergenti neutri. Non usare prodotti
abrasivi, spugnette abrasive, solventi o
oggetti metallici.
2.4 Smaltimento
AVVERTENZA!
Rischio di lesioni o soffocamento.
20
www.aeg.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

AEG HG995440XB Manuale utente

Categoria
Riscaldatori di spazio
Tipo
Manuale utente

in altre lingue