Canon imageFORMULA DR-M140 Manuale utente

Marca: Canon

Modello: imageFORMULA DR-M140

Categoria: Adattatore per lucidi per scanner

Tipo: Manuale utente

User Manual

• Please read this manual before operating this scanner.

• After you finish reading this manual, store it in a safe place for future reference.

■ ENERGY STAR

Office Equipment Program

This program is for U.S.A and Canada.

As an ENERGY STAR

Partner, CANON

ELECTRONICS INC. has determined that this

machine meets the ENERGY STAR

Program

guidelines for energy efficiency.

The ENERGY STAR

Office Equipment Program

is an international program that promotes energy saving through

the use of computers and other office equipment. The program

backs the development and dissemination of products with

functions that effectively reduce energy consumption. It is an open

system in which business proprietors can participate voluntarily.

The targeted products are office equipment, such as computers,

monitors, printers, fax, machine, copiers, and scanners. The

standards and logos are uniform among participating nations.

This model doesn’t provide setting options for power management.

■ European Union (and EEA) only.

This symbol indicates that this product is not to be

disposed of with your household waste, according to the

WEEE Directive (2002/96/EC) and your national law.

This product should be handed over to a designated

collection point, e.g., on an authorized one-for-one

basis when you buy a new similar product or to an

authorized collection site for recycling waste electrical and

electronic equipment (EEE). Improper handling of this type of

waste could have a possible negative impact on the environment

and human health due to potentially hazardous substances that

are generally associated with EEE. At the same time, your

cooperation in the correct disposal of this product will contribute to

the effective usage of natural resources. For more information

about where you can drop off your waste equipment for recycling,

please contact your local city office, waste authority, approved

WEEE scheme or your household waste disposal service. For

more information regarding return and recycling of WEEE

products, please visit www.canon-europe.com/environment

(EEA: Norway, Iceland and Liechtenstein)

■ Trademarks

• Canon and the Canon logo are registered trademarks of Canon

Inc. in the United States and may also be trademarks or

registered trademarks in other countries.

• Microsoft and Windows are registered trademarks of Microsoft

Corporation in the United States and other countries.

• ISIS is a registered trademark of Open Text in the United States.

• Intel and Pentium are registered trademarks of Intel Corporation.

• imageFORMULA is a trademark of CANON ELECTRONICS

INC.

• Other product and company names herein may be the

trademarks of their respective owners.

■ Copyright

reserved.

No part of this publication may be reproduced or transmitted in any

form or by any means, electronic or mechanical, including

photocopying and recording, or by any information storage or

retrieval system without the prior written permission of CANON

ELECTRONICS INC.

■ Reproduction Warning

This device is designed to be used in a legal manner, in

accordance with all applicable laws, including, but not limited to,

counterfeit and copyright laws, as well as laws pertaining to

national security.

Any person(s) found to have reproduced any of the following

materials (regardless of whether such reproduction was intentional

or not) for the purpose of misrepresenting such material as the

original may be prosecuted in accordance with the applicable laws

and regulations.

• Paper money or bank notes (domestic and foreign)

• Postage stamps, revenue stamps, or other similar stamps

• Stock certificates, bond certificates, promissory notes, cheques,

or other valuable certificates

• Passports, licenses, or other certificates or documents issued by

government officials or agencies

This is not an exhaustive list.

Canon is not responsible for how this scanner is used by an

individual.

Please note that certain intellectual property is protected by

without the express permission of the copyright holder except for

personal or household use under limited circumstances.

■ Disclaimers

The information in this document is subject to change without

notice.

CANON ELECTRONICS INC. MAKES NO WARRANTY OF ANY

KIND WITH REGARD TO THIS MATERIAL, EITHER EXPRESS

OR IMPLIED, EXPECT AS PROVIDED HEREIN, INCLUDING

WITHOUT LIMITATION, THEREOF, WARRANTIES AS TO

MARKETABILITY, MERCHANTABILITY, FITNESS FOR A

PARTICULAR PURPOSE OF USE OR NON-INFRINGEMENT.

CANON ELECTRONICS INC. SHALL NOT BE LIABLE FOR ANY

DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF

ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM

THE USE OF THIS MATERIAL.

CANON ELECTRONICS INC. IS NOT LIABLE FOR THE

STORAGE AND HANDLING OF DOCUMENTS SCANNED WITH

THIS PRODUCT, OR THE STORAGE AND HANDLING OF

RESULTING SCANNED IMAGE DATA.

IF YOU INTEND TO DISCARD THE ORIGINALS OF SCANNED

DOCUMENTS, YOU THE CUSTOMER ARE RESPONSIBLE

FOR INSPECTING THE SCANNED IMAGES AND VERIFYING

THAT DATA IS INTACT.

THE MAXIMUM LIABILITY OF CANON ELECTRONICS INC.

UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE

PRICE OF THE PRODUCT COVERED BY THE WARRANTY.

■ FCC REGULATIONS (For 120 V model)

Document Scanner, Model M182010

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesired operation.

Note: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which

can be determined by turning the equipment OFF and ON, the user

is encouraged to try to correct the interference by one or more of

the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for

help.

Use of shielded cable is required to comply with Class B limits in

Subpart B of Part 15 of FCC Rules.

Do not make any changes or modifications to the equipment

unless otherwise specified in the manual. If such changes or

modifications should be made, you could be required to stop

operation of the equipment.

Canon U.S.A. Inc.

One Canon Park, Melville, NY 11747, U.S.A.

Tel. No. (800)652-2666

■ RADIO INTERFERENCE REGULATIONS (For 120 V

models)

This digital apparatus does not exceed the Class B limits for radio

noise emissions from digital apparatus as set out in the

interference-causing equipment standard entitled “Digital

Apparatus”, ICES-003 of the Industry Canada.

■ RÈGLEMENT SUR LE BROUILLAGE

RADIOÉLECTRIQUE (For 120 V models)

Cet appareil numérique respecte les limites de bruits

radioélectriques applicables aux appareils numériques de Classe

B prescrites dans la norme sur le matériel brouilleur: “Appareils

Numériques”, NMB-003 édictée par l’Industrie Canada.

■ MODEL NAMES

The following names may be provided for the safety regulations in

each sales region of the document scanner.

Model Flatbed Scanner Unit 102 is identical to model M182010.

Model Flatbed Scanner Unit 102 is the sales name of model

M182010.

Table of Contents

Setup Guide ......................................................................... 5

Preface ................................................................................. 7

Symbols Used in This Manual..................................................... 7

Important Safety Instructions.............................................8

Installation Location .................................................................... 8

AC Adapter.................................................................................. 8

Moving the Flatbed...................................................................... 9

Handling ...................................................................................... 9

Disposal .................................................................................... 10

When Sending the Flatbed for Repairs ..................................... 10

Features ............................................................................ 10

Names and Functions of Parts......................................... 11

Documents......................................................................... 12

Placing Documents ................................................................... 12

Scanning Methods.............................................................13

Feeder Scanning....................................................................... 13

Limitations ................................................................................. 13

Supported Functions ................................................................. 13

Scanning with CapturePerfect ......................................... 15

Other Methods for Scanning ............................................ 19

Changing the Feeding Option for Scanning .............................. 19

Using Two Scanners ................................................................. 21

Troubleshooting................................................................ 22

Common Problems and Solutions............................................. 22

Appendix ............................................................................23

Routine Cleaning....................................................................... 23

Auto Power OFF Setting ........................................................... 24

Specifications ................................................................... 25

External Dimensions Diagram......................................... 26

Setup Guide

Checking the

Accessories

If any of the items listed below are missing or

damaged, contact your local authorized Canon

dealer or service representative.

Flatbed Scanner Unit 102

USB cable (Length: 1.8 m (70.9"))

AC Adapter/Power Cord* (Connected length: 2.6 m (102"))

* The shape of the power plug varies by country and

region.

Manuals and software

• Setup Guide (This document)

• Registration Card (U.S.A and Canada only)

• Warranty Card (U.S.A and Canada only)

• Setup Disc

Removing the

Protective Material

Remove the orange adhesives and protective

material (indicated by

▼

below) from the flatbed.

Installing the

Software

Insert the setup disc into the

computer.

● If the setup menu does not start up

automatically, execute setup.exe from

the setup disc.

● If the [User Account Control] screen

appears, click [Yes] (or [Allow]).

Click [Typical Installation], and follow

the instructions on the screen to

complete installation.

Click [Exit] to close the setup menu.

• Items included in this manual are

subject to change without notice.

• You must keep the machine’s

packaging and packing materials for

storing or transporting the machine.

Set the lock switch at the bottom of the

flatbed to the position to release the

scanning unit.

● Log on to Windows as an Administrator.

● Close all other applications.

● Install the driver for the Canon

document scanner beforehand.

● Do not connect the flatbed to the

computer. If you connected the flatbed

to the computer and turned it ON, click

[Cancel] in the screen that appears, and

turn OFF the flatbed.

Please read first.

Connecting to the Computer and Power Supply

When connecting to the ScanFront 400

Turning the Power

Turn ON the flatbed first, and then turn ON the

Canon document scanner.

• Use the USB cables supplied with each scanner.

• Do not connect scanners other than the Canon document scanner that will be used in

conjunction with the flatbed to the computer, regardless of whether they are compatible

with the flatbed. If you do so, the flatbed or the Canon document scanner may not

operate properly.

Power button

This completes the setup.

Preface

Thank you for purchasing the Canon imageFORMULA Flatbed

Scanner Unit 102. Please read this manual thoroughly before using

the scanner to familiarize yourself with its capabilities, and to make the

most of its many functions. After reading this manual, store it in a safe

place for future reference.

NOTE

An electronic version of this manual is installed to the following

location as a PDF (Portable Document Format) file during software

installation from the setup disc.

Windows 7

Windows 8.1

Windows 10

Symbols Used in This Manual

The following symbols are used in this manual to explain procedures,

restrictions, handling precautions, and instructions that should be

observed for safety.

WARNING

Indicates a warning concerning operations that may lead to death or

injury to persons if not performed correctly. To use the machine safely,

always pay attention to these warnings.

CAUTION

Indicates a caution concerning operations that may lead to injury to

persons, or damage to property if not performed correctly. To use the

machine safely, always pay attention to these cautions.

IMPORTANT

Indicates operational requirements and restrictions. Be sure to read

these items carefully to operate the machine correctly, and avoid

damage to the machine.

NOTE

Indicates a clarification of an operation, or contains additional

explanations for a procedure. Reading these notes is highly

recommended.

Important Safety Instructions

To ensure the safe operation of this flatbed, make sure to read the

safety warnings and precautions described below.

Installation Location

The performance of this flatbed is affected by the environment in

which it is installed. Make sure that the location where the flatbed is

installed meets the following environmental requirements.

● Provide adequate space around the flatbed for operation,

maintenance, and ventilation.

● Avoid installing the flatbed in direct sunlight. If this is unavoidable,

use curtains to shade the flatbed.

● Avoid locations with excessive dust. Dust can have negative effects

on the inner parts of the flatbed.

● Avoid warm or humid locations, such as in the vicinity of a water

faucet, water heater, or humidifier. Avoid locations where ammonia

gas is emitted. Avoid locations near volatile or flammable

chemicals, such as alcohol or paint thinner.

● Avoid locations that are subject to vibration.

● Avoid exposing the flatbed to rapid changes in temperature. If the

room in which the flatbed is installed is cold but rapidly heated,

water droplets (condensation) may form inside the flatbed. This

may result in a noticeable degradation in scanning quality. The

following conditions are recommended for optimal scanning quality:

Room temperature: 10°C to 32.5°C (50°F to 90.5°F)

Humidity: 20% to 80% RH

● Avoid installing the flatbed near equipment that generates a

magnetic field (e.g., speakers, televisions, or radios.)

AC Adapter

● Connect the AC adapter only to a power outlet of the rated voltage

and power supply frequency (120 V, 60 Hz or 220-240 V, 50/60 Hz

depending on your region).

● Do not connect other electrical equipment to the same power outlet

to which the flatbed is connected. Also, if you use an extension

cord, make sure that the extension cord is rated for the current

requirements of the flatbed.

● Never disassemble or modify the AC adapter, as this is dangerous.

● The power cord may become damaged if it is often stepped on or if

heavy objects are placed on it. Continued use of a damaged power

cord and AC adapter may lead to an accident, such as a fire or

electrical shock.

● Do not use the power cord while it is coiled.

● Do not pull directly on the power cord. When disconnecting the

power cord, grasp the power plug and remove it from the power

outlet.

● Keep the area around the power cord clear of objects so that the

power cord can be disconnected easily in an emergency.

● Do not use an AC adapter other than the one provided with the

flatbed. Do not use the AC adapter provided with the flatbed with

other products.

● If you have any questions regarding the power supply, contact your

local authorized Canon dealer or service representative for further

information.

100 mm

(3.9")

100 mm

(3.9")

100 mm (3.9")

Moving the Flatbed

● If you move the flatbed, make sure to set the lock switch at the

bottom of the flatbed to the position to lock the scanning unit into

place. Make sure to carry the flatbed with both hands so as not to

drop it. The flatbed weighs approximately 2.5 kg (5.5 lb.).

● Before using the flatbed, set the lock switch at the bottom of the

flatbed to the position to release the scanning unit.

● Make sure to disconnect the interface cable and AC adapter before

you move the flatbed. If the flatbed is transported with these items

connected, the plugs and connectors may be damaged, or cause

the flatbed to fall and result in personal injury or damage to the

flatbed.

Handling

WARNING

■ Never use alcohol, benzene, paint thinner, aerosol sprays, or any

other flammable substance near the flatbed.

■ Do not cut, damage, or modify the power cord. Do not place heavy

objects on the power cord, and do not pull or excessively bend the

power cord.

■ Never connect the power cord when your hands are wet.

■ Do not connect the flatbed to a multiplug power strip.

■ Do not knot or coil the power cord, as this may result in a fire or

electric shock. When connecting the power cord, make sure that the

power plug is securely and completely inserted into the power

outlet.

■ Do not use a power cord or AC adapter other than the ones

provided with this flatbed. Do not use the supplied power cord with

other products.

■ Do not take the flatbed apart or modify it.

■ Never disassemble or modify the AC adapter, as this is dangerous.

■ Do not use flammable sprays near the flatbed.

■ When cleaning the flatbed, turn the power switch OFF and

disconnect the power cord from the power supply.

■ Clean the flatbed using a slightly dampened cloth that has been well

wrung out. Never use alcohol, benzene, paint thinner, or any other

flammable substances.

■ Disconnect the power cord from the power outlet regularly, and

clean the area around the base of the power plug’s metal pins and

the power outlet with a dry cloth to ensure that all dust and grime is

removed. If the power cord is connected for a long period of time in

a damp, dusty, or smoky location, dust can build up around the

power plug and become damp. This may cause a short circuit and

result in a fire.

■ If the flatbed makes strange noises, or gives off smoke, heat or

strange odors, or the flatbed does not function or other

abnormalities occur when you use the flatbed, immediately turn the

power switch OFF and disconnect the power plug from the power

outlet. Then, contact your local authorized Canon dealer or service

representative for further information.

■ Do not drop the flatbed, or subject it to impact or strong shock.

Should the flatbed ever become damaged, immediately turn the

power switch OFF, and disconnect the power plug from the power

outlet. Then, contact your local authorized Canon dealer or service

representative for further information.

■ Before moving the flatbed, make sure to turn the power switch OFF,

disconnect the power plug from the power outlet, and set the lock

switch at the bottom of the flatbed to the positon to lock the

scanning unit into place.

CAUTION

■ Do not install the flatbed on a surface that is unstable, tilted, or

subject to excessive vibrations. Doing so may cause the flatbed to

fall, resulting in personal injury or damage to the flatbed.

■ Never place small metal objects, such as staples, paper clips, or

jewelry on the flatbed. These items may fall into the flatbed, and

cause a fire or electric shock. If such objects ever fall inside the

flatbed, immediately turn the power switch OFF, and disconnect the

power plug from the power outlet. Then, contact your local

authorized Canon dealer or service representative to have the unit

serviced.

■ Do not install the flatbed in a humid or dusty location. Doing so may

cause a fire or electric shock.

Lock Switch

■ Do not place objects on the flatbed. The objects may fall over or off

of the flatbed, resulting in personal injury.

■ Connect the AC adapter only to a power outlet of the rated voltage

and power supply frequency (120 V, 60 Hz or 220-240 V, 50/60 Hz

depending on your region).

■ When unplugging the power cord, grasp it firmly by its power plug.

Do not pull directly on the power cord, as this may damage or

expose the cord’s internal wiring, resulting in a fire or electric shock.

■ Leave sufficient space around the power plug so that it can be

disconnected easily. If objects are placed around the power plug,

you will be unable to disconnect it in an emergency.

■ Do not allow water or flammable substances (alcohol, paint thinner,

benzene, etc.) to spill onto the flatbed, as this may result in a fire or

electric shock.

■ Also, turn OFF the power switch, and disconnect the power cord

from the power outlet for safety when the machine will not be used

for an extended period of time, such as during consecutive holidays.

■ Open and close the document cover gently. Failure to do so may

result in a malfunction or personal injury.

■ Be careful when closing the document cover to avoid pinching your

hands. Failure to do so may result in personal injury.

■ Do not press down hard on the document cover. Doing so may

result in damage to the glass, a malfunction, or personal injury.

■ Never place any object other than documents to be scanned onto

the scanning glass. Doing so may result in a malfunction or

personal injury.

■ When using the flatbed in cold temperatures, wait a few moments

after turning the power switch ON. Failure to do so may result in a

condensation error.

Disposal

When disposing the flatbed or AC adapter, make sure to follow the

local ordinances and laws or consult with your local authorized Canon

dealer or service representative.

When Sending the Flatbed for Repairs

If you need to send the flatbed out for repairs, use the packing box in

which it came. Make sure to set the lock switch at the bottom of the

flatbed to the positon to lock the scanning unit into place, and firmly

secure the flatbed with packaging material when you place it in the

packing box.

Features

The Flatbed Scanner Unit 102 is intended to be used in combination

with the Canon document scanners. The flatbed cannot operate as a

stand-alone unit.

The main features of the flatbed are described below.

● Wide-range document support

Connect the flatbed scanner and a Canon document scanner to a

computer to enable flatbed scanning. The flatbed allows you to

scan thin document sheets, magazines, and a variety of other

documents that cannot be scanned using a feeder.

● High Image Quality

The flatbed enables high-quality 600 dpi scanning in 24-bit color,

grayscale, and black and white scanning modes.

● Seamless Dual-Scanner Operation

Combine the scanned images from two scanners to create a single

image file.

NOTE

The flatbed does not support all of the scanning options available on

the connected Canon document scanner.

Names and Functions of Parts

A Document Cover

Close this to keep documents in place while scanning.

B Scanning Glass

C Power Button

Press this to turn ON the flatbed. The power button lights when the

flatbed is turned ON.

To turn the flatbed OFF, press and hold the power button until it

turns OFF.

NOTE

The auto power OFF setting, which automatically turns the flatbed

OFF if it is not operated for 4 hours, is enabled under default

conditions.

For details on disabling this setting, “Auto Power OFF Setting”

(p. 24).

D Start Button

Press this button to start scanning the document placed on the

scanning glass.

E Stop Button

Press this button to stop scan procedures in progress.

F Lock Switch

Use this to lock the internal scanning unit into place.

G Power Connector

Connect the provided AC adapter here.

H USB Connector (Type B)

Use this connector to connect the flatbed to a computer.

Documents

The flatbed can scan documents up to 216 mm (8.5") in width and

356 mm (14.0") in length.

Placing Documents

Open the document cover, and place the document on the scanning

glass, as shown below, with the scanning side facing down. Make sure

to align the bottom right corner of the scanning side with the bottom

left corner of the scanning glass.

IMPORTANT

• Do not place objects other than the document to be scanned onto

the scanning glass. Doing so may result in a malfunction or

personal injury.

• Open and close the document cover gently. Excessive force may

result in damage to the cover or breaking the scanning glass and

personal injury.

• You cannot scan film.

• Make sure to straighten wrinkled or curled documents before

placing them on the flatbed, and gently press down on the

document cover while scanning is in progress.

Scanning Methods

When the flatbed scanner unit is connected to a scanner and

computer, you can select one of the following methods to scan

documents, based on the document type and intended purpose.

Flatbed Scanning

You can use the flatbed to scan documents one sheet at a time, single

page documents, or documents that cannot be scanned using the

feeder.

Feeder Scanning

Use the feeder on a Canon document scanner connected to the

computer to perform operations such as multipage document

scanning. In such cases, the operations on the connected Canon

document scanner are the same as those during stand-alone use. For

details on feeder scanning, refer to the User Manual of the connected

Canon document scanner.

Limitations

• To use the flatbed, you must install the software included on the

provided setup disc. The software that operates the connected

Canon document scanner (ISIS/TWAIN driver) must also be

installed.

• If WIA driver is installed, the flatbed can operate as a stand-alone

unit without a Canon document scanner connected. In that case,

however, there are limitations on the functions available comparing

with the usual scanning using the ISIS/TWAIN driver.

• Both the flatbed and the connected Canon document scanner must be

turned ON to scan using the flatbed. If the flatbed is turned ON but the

Canon document scanner is turned OFF, you cannot scan documents

using the flatbed. However, you can scan documents using the Canon

document scanner while it is turned ON, even if the flatbed is turned

OFF.

• When the conditions for scanning require a large amount of the

computer’s memory, scanning may not be possible if the memory is

insufficient. If a memory error appears during scanning, exit the

application and change the scanning conditions before attempting to

scan again.

Supported Functions

To scan using the functions supported by the flatbed, the connected

Canon document scanner must also support the functions used.

Flatbed Scanning Feeder Scanning

Functions

Use on

the

flatbed

Functions

Use on

the

flatbed

Advanced Text Enhancement No Prevent Bleed Through /

Remove Background

Ye s

Advanced Text Enhancement II Yes

Hi-Speed Text Enhancement No Remove shadow No

Auto Color Detection Yes Border Removal Yes

Color/gray/binary detection Yes Erase Dot Yes

Color/gray detection Yes Text Orientation Recognition Yes

Automatic Size Detection Yes Erase Notch Yes

Area specification Yes Punch Hole Removal Yes

Margin No Apply corrections suitable for

photographs

Auto resolution detection Yes

Two Sided Scanning No Double Feed Detection No

Skip Blank Page No Automatic Feeding No

Folio No Manual Feeding No

Speed priority No Panel-Feeding Yes

Skew Detection No Thin Paper Mode No

Deskew Yes Non Separation Feeding Mode No

Reverse side No Verify Count No

Brightness Auto No Staple Detection No

Gamma Correction Yes Document Orientation Yes

Edge emphasis Yes Batch Separation No

Color drop-out /

color enhance (red/green/blue)

Yes Patchcode No

Rapid recovery system No

Color drop-out /

color enhance (red/green/blue)

Yes JPEG Transfer No

Prescan No

Color Elimination No MultiStream Yes

(Yes: Supported, No: Not supported)

Custom color drop-out No Back-side settings

(when MultiStream is enabled)

Custom color Enhance No

Moire Reduction Yes Barcode Yes

Character Emphasis Yes 2D code Yes

Background smoothing Yes Imprinter No

Addon No

Functions

Use on

the

flatbed

Functions

Use on

the

flatbed

Scanning with CapturePerfect

You can use the CapturePerfect software provided with the connected

Canon document scanner to specify the scanning conditions and saving

options before scanning.

The following describes how to scan documents with CapturePerfect

using the [Scan Batch to File] setting. When you use this scanning

method, documents that are scanned one sheet at a time on the

flatbed are saved to the same image file.

This section describes the scanning procedure in CapturePerfect 3.1.

The same procedure can be used in CapturePerfect 3.0.

NOTE

For details on other scanning methods, refer to the CapturePerfect

Operation Guide.

From the Windows Taskbar, click [Start] and select [All

Programs], [CapturePerfect 3.1], and [CapturePerfect

3.1].

CapturePerfect starts.

Select [Select Scanner] from the [Scan] menu.

The [Select Scanner] dialog box appears.

Select the name of the Canon document scanner you are

using which should be followed by "w/FSU102", and click

the [Settings] button.

The [Configure Device Settings] dialog box appears.

IMPORTANT

If only the scanner name appears, try reinstalling the software

included on the setup disc provided with the flatbed.

Click [OK] to finish scanner selection.

Select [Scan Batch to File] from the [Scan] menu.

The [Scan Batch to File] dialog box appears.

Click [Scanner Setting], and configure the scanner

settings.

The properties dialog box for the scanner driver appears.

Configure the [Main Scanner/Flatbed] setting.

Select [Flatbed] if the document is placed on the flatbed, and

select [Main Scanner] if the document is placed in the Canon

document scanner. If you select [Auto], any documents placed in

the feeder will be scanned. If there are no documents in the

feeder, scanning is performed on the flatbed.

Configure the Canon document scanner’s settings if

necessary.

Click the [More] button to open the settings dialog box for the

Canon document scanner. When you finish configuring settings,

click [OK] to close the dialog box.

For details on each setting, refer to the Help.

Configure the scanning conditions.

For details on settings, p. 17.

Specify the file name and format for the image file to be

saved.

For details on other settings in the [Scan Batch to File Setting]

dialog box, refer to the CapturePerfect Operation Guide.

Place the documents to be scanned, and click [Save] to

start scanning.

IMPORTANT

• The method for placing documents differs, depending on the

[Feeding Option] setting. For details, p. 19.

• Do not move the document placed on the scanning glass while

the power indicator is flashing and scanning is in progress.

When the [Continue Scanning] dialog box appears, and

click [Continue Scanning] or [Cancel Scan].

When scanning is complete, select [Exit] from the [File]

menu to exit CapturePerfect.

Scanner Settings

When you open the settings dialog box for your scanner while the

flatbed is connected, you can configure scan conditions with the

following settings.

[User Preference]

Enter a name and click [Save]. You can recall the name and its

configurations in the settings dialog box, whenever necessary.

[Main Scanner/Flatbed]

Select [Flatbed] to scan the document placed on the flatbed. Select

[Main Scanner] to scan documents placed in the feeder of the

connected Canon document scanner.

If you select [Auto], any documents placed in the feeder will be

scanned. If there are no documents in the feeder, scanning is

performed on the flatbed.

For details, “Using Two Scanners” (p. 21).

[Mode]

Select the scanning mode.

[Page Size]

Select the page size of the document to be scanned.

If you select [Match original size], the document size is detected

automatically. The [Settings] button is enabled in such cases, and by

clicking the button and displaying the dialog box, you can configure

the size detection area (legal, A4, or A5R area) according to the

document to be scanned.

[Dots per inch]

Specify the scanning resolution.

[Brightness]

Adjust the brightness of scanned images.

[Contrast]

Adjust the contrast of scanned images.

[Scanning Side]

When scanning documents placed in the feeder of the connected

Canon document scanner, select which sides of a document to scan.

[Automatically straightens skewed images]

Click to ensure that if a document is scanned at an angle, the slant is

detected and straightened out in the scanned image.

[Area]

Click this to display a dialog box for specifying the area of the

document to scan.

[More]

Click this to display the settings dialog box for the connected Canon

document scanner, and configure advanced scan conditions. For

details on settings, refer to the Help for the ISIS/TWAIN driver.

[Default]

Return all configurations in the settings dialog box to their default

values.

Other Methods for Scanning

This section describes the various scanning options.

Changing the Feeding Option for

Scanning

Changing the feeding option setting in the scanner settings dialog box

can be helpful when scanning multipage documents.

The following three feeding options are available:

● [Standard Feeding]

This is the standard feeding method. The scanning operation ends

when the documents placed in either scanner finish scanning.

● [Panel-Feeding]

When the documents placed in either scanner finish scanning, the

scanner enters a standby state and waits for additional documents

to be placed. When you place additional documents and press the

Start button, scanning continues.

● Automatic Feeding

When additional documents are placed after a document finishes

feeding, the scanner automatically detects these documents and

continues scanning.

This feeding option can only be selected when [Main Scanner/

Flatbed] is set to [Main Scanner].

Configuring the Feeding Option

This section describes how to set [Feeding Option] to [Panel-

Feeding].

Open the scanner settings dialog box from your

application.

When using CapturePerfect, for example, select [Scanner Setting]

from the [Scan] menu. For details on how to open the settings

dialog box from other applications, refer to the operation manual

of the application.

Configure the [Main Scanner/Flatbed] setting.

If the document is placed in the feeder of the connected Canon

document scanner, select [Main Scanner]. If you plan to switch

between using the feeder and flatbed for scanning, select [Auto].

Click the [More] button to open the settings dialog box for

the Canon document scanner.

Click the [Feeding] tab.

Set [Feeding Option] to [Panel-Feeding].

Click [OK] to close the settings screen.

Click [OK] to close the scanner settings dialog box.

Place the document in the scanner, and start the scan

procedure from the application.

Press the start button on the scanner in which the

document is placed.

If the document is placed in the Canon document scanner,

pressing the start button on the scanner will start the scan

procedure.

If the document is placed on the flatbed, pressing the start button

on the flatbed will start the scan procedure.

When the document finishes scanning, the scanner waits for the

next document to be placed.

Place the next document to be scanned.

If you selected [Auto] for [Main Scanner/Flatbed] in step 2, you

can place the document in either the feeder or the flatbed to

continue scanning.

Repeat steps 9 and 10 until all documents are scanned.

Press the stop button on the scanner when all documents

have been scanned.

This completes the scan procedure.

NOTE

Depending on the application you are using and whether the flatbed

is connected, scanner operations when scanning with the [Feeding

Option] set to [Panel-Feeding] may differ as follows.

When scanning with only a

Canon document scanner

When scanning with the

flatbed connected

When you press the stop button

on the scanner, a dialog box

asking whether you want to

continue scanning appears.

You must press the stop button

on the scanner twice to display

the dialog box that asks whether

you want to continue scanning.

When you select the option to

continue scanning in the above

dialog box, the driver settings

screen appears automatically.

Selecting the option to continue

scanning will not automatically

display the driver settings

screen. You must press the start

button on the scanner.

La pagina si sta caricando...

Canon imageFORMULA DR-M140 Manuale utente

Marca: Canon

Modello: imageFORMULA DR-M140

Categoria: Adattatore per lucidi per scanner

Tipo: Manuale utente

Scarica PDF

rapporto

in altre lingue

English: Canon imageFORMULA DR-M140 User manual

Canon imageFORMULA DR-M140 Manuale utente

Canon imageFORMULA DR-M140 Manuale utente

in altre lingue

Documenti correlati

Altri documenti