Citizen CT-S601II Manuale utente

LINE THERMAL PRINTER

MODEL CT-S601 Type II

User’s Manual

Mode d’emploi

Benutzerhandbuch

Manuale dell’utente

Manual de Usuario

WEEE MARK

En

Wenn Sie dieses Produkt entsorgen wollen, dann tun Sie dies bitte nicht zusammen mit dem

Haushaltsmüll. Es gibt im Rahmen der WEEE-Direktive innerhalb der Europäischen Union

(Direktive 2002/96/EC) gesetzliche Bestimmungen für separate Sammelsysteme für gebrauchte

elektronische Geräte und Produkte.

Ge

Si vous souhaitez vous débarrasser de cet appareil, ne le mettez pas à la poubelle avec vos

ordures ménagères. Il existe un système de récupération distinct pour les vieux appareils

électroniques conformément à la législation WEEE sur le recyclage des déchets des

équipements électriques et électroniques (Directive 2002/96/EC) qui est uniquement valable

dans les pays de l’Union européenne.

Les appareils et les machines électriques et électroniques contiennent souvent des matières

dangereuses pour l’homme et l’environnement si vous les utilisez et vous vous en débarrassez

de façon inappropriée.

Fr

Si desea deshacerse de este producto, no lo mezcle con residuos domésticos de carácter

general. Existe un sistema de recogida selectiva de aparatos electrónicos usados, según

establece la legislación prevista por la Directiva 2002/96/CE sobre residuos de aparatos

eléctricos y electrónicos (RAEE), vigente únicamente en la Unión Europea.

Sp

Se desiderate gettare via questo prodotto, non mescolatelo ai rifiuti generici di casa. Esiste

un sistema di raccolta separato per i prodotti elettronici usati in conformità alla legislazione

RAEE (Direttiva 2002/96/CE), valida solo all’interno dell’Unione Europea.

It

Deponeer dit product niet bij het gewone huishoudelijk afval wanneer u het wilt verwijderen. Er

bestaat ingevolge de WEEE-richtlijn (Richtlijn 2002/96/EG) een speciaal wettelijk

voorgeschreven verzamelsysteem voor gebruikte elektronische producten, welk alleen geldt

binnen de Europese Unie.

Du

Hvis du vil skille dig af med dette produkt, må du ikke smide det ud sammen med dit almindelige

husholdningsaffald. Der findes et separat indsamlingssystem for udtjente elektroniske produkter

i overensstemmelse med lovgivningen under WEEE-direktivet (direktiv 2002/96/EC), som

kun er gældende i den Europæiske Union.

Da

Se quiser deitar fora este produto, não o misture com o lixo comum. De acordo com a legislação

que decorre da Directiva REEE – Resíduos de Equipamentos Eléctricos e Electrónicos (2002/

96/CE), existe um sistema de recolha separado para os equipamentos electrónicos fora de

uso, em vigor apenas na União Europeia.

Por

Pol

Jeżeli zamierzasz pozbyć się tego produktu, nie wyrzucaj go razem ze zwykłymi

domowymi odpadkami. Według dyrektywy WEEE (Dyrektywa 2002/96/EC)

obowiązującej w Unii Europejskiej dla używanych produktów elektronicznych

należy stosować oddzielne sposoby utylizacji.

If you want to dispose of this product, do not mix it with general household waste. There is a

separate collection systems for used electronics products in accordance with legislation under

the WEEE Directive (Directive 2002/96/EC) and is effective only within European Union.

Declaration of Conformity

This printer conforms to the following Standards:

The Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC, the RoHS

Directive 2011/65/EU, and the WEEE Directive 2002/96/EC.

LVD : EN60950-1

EMC: EN55022 Class A

EN61000-3-2

EN61000-3-3

EN55024

This declaration applies only to the 230-V model.

IMPORTANT: This equipment generates, uses, and can radiate radio frequency

energy and if not installed and used in accordance with the instruction manual, may

cause interference to radio communications. It has been tested and found to comply

with the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC

Rules, which are designed to provide reasonable protection against such interference

when operated in a commercial environment. Operation of this equipment in a

residential area is likely to cause interference, in which case the user at his own

expense will be required to take whatever measures may be necessary to correct the

interference.

CAUTION: Use shielded cable for this equipment.

Sicherheitshinweis

Die Steckdose zum Anschluß dieses Druckers muß nahe dem Gerät angebracht und

leicht zugänglich sein.

For Uses in Canada

This Class A Information Technology Equipment (ITE) complies with Canadian CAN

ICES-3(A)/NMB-3(A).

This Information Technology Equipment (ITE) does not exceed the Class A limits for

radio noise emissions from digital apparatus set out in the Radio Interference

Regulations of the Canadian Department of Communications.

Pour L’utilisateurs Canadiens

Cet Equipements informatiques (EI) de la classe A est conforme a la norme CAN ICES-

3(A)/NMB-3(A) du Canada.

Le present Equipements informatiques (EI) n'emet pas de bruite radio electriques

depassant les limites applicables aux appareils numeriques de la classe A prescrites

dans le Reglement sur le brouillage radioelectrique edicte par le ministere des

Communications du Canada.

ENGLISH

—1—

GENERAL PRECAUTIONS

 Before using this product, be sure to read through this manual. After

having read this manual, keep it in a safe, readily accessible place for

future reference.

 The information contained herein is subject to change without prior

notice.

 Reproduction or transfer of part or all of this document in any means is

prohibited without permission from Citizen Systems.

 Note that Citizen Systems is not responsible for any operation results

regardless of omissions, errors, or misprints in this manual.

 Note that Citizen Systems is not responsible for any trouble caused as a

result of using options or consumables that are not specified in this

manual.

 Except explained elsewhere in this manual, do not attempt to service,

disassemble, or repair this product.

 Note that Citizen Systems is not responsible for any damage attributable

to incorrect operation/handling or improper operating environments that

are not specified in this manual.

 Data is basically for temporary use and not stored for an extended period

of time or permanently. Please note that Citizen Systems is not

responsible for damage or lost profit resulting from the loss of data

caused by accidents, repairs, tests or other occurrences.

 If you find omissions, errors, or have questions, please contact your

Citizen Systems dealer.

 If you find any pages missing or out of order, contact your Citizen Systems

dealer for a replacement.

"Made for iPod," "Made for iPhone," and "Made for iPad" mean that an electronic

accessory has been designed to connect specifically to iPod, iPhone, or iPad,

respectively, and has been certified by the developer to meet Apple performance

standards. Apple is not responsible for the operation of this device or its compliance

with safety and regulatory standards.

Please note that the use of this accessory with iPod, iPhone or iPad may affect

wireless performance.

 iPad, iPhone and iPod touch are trademarks of Apple Inc., registered in the U.S. and other

countries. iPad Air and iPad mini are trademarks of Apple Inc.

 EPSON and ESC/POS are registered trademarks of Seiko Epson Corporation.

 QR Code is a registered trademark of DENSO WAVE INCORPORATED.

 Ethernet is a registered trademark of Fuji Xerox Corporation.

 Bluetooth

®

is a registered trademark of Bluetooth-SIG Inc.

 CITIZEN is a registered trademark of Citizen Watch Co., Ltd. Japan

 All other trademarks are the property of their respective owners.

 Citizen Systems use these trademarks in accordance with the license of relevant owners.

—2—

Before using this product for the first time, carefully read these SAFETY PRECAUTIONS.

Improper handling may result in accidents (fire, electric shock or injury).

In order to prevent injury to operators, third parties, or damage to property, special

warning symbols are used in the User’s Manual to indicate important items to be strictly

observed.

 After having read this Manual, keep it in a safe, readily accessible place for future

reference.

 Some of the descriptions contained in this manual may not be relevant to some printer

models.

The following describes the degree of hazard and damage that could occur if the printer

is improperly operated by ignoring the instructions indicated by the warning symbols.

SAFETY PRECAUTIONS

...WHICH SHOULD BE STRICTLY OBSERVED

WARNING

Neglecting precautions indicated by this symbol may result in fatal or serious injury.

CAUTION

Neglecting precautions indicated by this symbol may result in injury or damage to

property.

This symbol is used to alert your attention to important items.

This symbol is used to alert you to the danger of electric shock or electrostatic

damage.

This symbol denotes a request to unplug the printer from the wall outlet.

This symbol is used to indicate that the power supply must be grounded.

This symbol is used to indicate useful information, such as procedures,

instructions or the like.

This symbol is used to indicate prohibited actions.

—3—

PRECAUTIONS ON PRINTER INSTALLATION

WARNING

 Do not use or store this product in a place where it will be exposed to:

* Flames or moist air.

* Direct sunlight.

* Hot airflow or radiation from a heating device.

* Salty air or corrosive gases.

* Ill-ventilated atmosphere.

* Chemical reactions in a laboratory.

* Airborne oil, steel particles, or dust.

* Static electricity or strong magnetic fields.

• Neglecting these warnings may result in printer failure, overheating,

emission of smoke, fire, or electric shock.

 Do not drop any foreign object nor spill liquid into the printer. Do not

place any object on the printer either.

 Do not drop any metallic object such as paper clips, pins or screws

into the printer.

 Do not place a flower vase, pot, or anything containing water on the

printer.

 Do not spill coffee, soft drinks, or any other liquid into the printer.

 Do not spray insecticide or any other chemical liquid over the printer.

• Dropping a metallic foreign object into the printer, may cause printer

failure, fire, or electric shock. Should it occur, immediately turn the

printer off, unplug it from the supply outlet, and call your local Citizen

Systems dealer.

Do not handle the printer in the following ways:

 Do not subject the printer to strong impacts or hard jolts (e.g., being

stepped on, dropped or struck).

 Never attempt to disassemble or modify the printer.

• Neglecting to handle properly may result in printer failure,

overheating, emission of smoke, fire, or electric shock.

 Install, use, or store the printer out of the reach of children.

• Electric appliances could cause an unexpected injury or accident if

they are handled or used improperly.

• Keep the power cord and signal cables out of the reach of children.

Also children should not be allowed to gain access to any internal

part of the printer.

• The plastic bag the printer came in must be disposed of properly or

kept away from children. Wearing it over the head may lead to

suffocation.

—4—

CAUTION

Do not use the printer under the following conditions.

 Avoid locations subject to vibration or instability.

 Avoid locations where the printer is not level.

• The printer may fall and cause an injury.

• The quality of printing may deteriorate.

 Do not obstruct the printer’s air vents.

 Do not place anything on the printer.

 Do not cover or wrap the printer in cloth or blankets.

• Doing so could cause heat to build up and deform the case or start a

fire.

 Avoid using the printer near a radio or TV set or from supplying it from

the same electric outlet as these appliances.

 Avoid using the printer interconnected with a cable or cord that has no

protection against noise. (For interconnections, use shielded or a

twisted pair of cables and ferrite cores, or other anti-noise devices.)

 Avoid using the printer with a device that is a strong source of noise.

• The printer may have an adverse effect on nearby radio or TV

transmissions. There may also be cases when nearby electrical

appliances adversely influence the printer, causing data errors or

malfunction.

 Installed in any orientation other than those specified.

• Malfunction, failure, or electric shock may result.

 Connect the printer to a ground.

• Electric leakage may cause an electric shock.

 Do not connect the printer’s ground to any of the following:

* Gas piping

• A gas explosion could result.

* Telephone line ground

* Lightning rod

• If lightning strikes a large surge of current may cause fire or

shock.

* Water pipes

• Plastic water pipes should not be used for grounding. (Those

approved by a Waterworks Department may be used.)

 Before connecting or disconnecting the grounding lead to or from the

printer, always unplug it from the electric outlet.

—5—

PRECAUTIONS IN HANDLING THE PRINTER

WARNING

Please observe the following precautions for power source and power

cord:

 Do not plug or unplug the power cord with a wet hand.

 Use the printer only at the specified supply voltage and frequency.

 Use only the specified AC adapter with the printer.

 Check to make sure that the supply outlet from which the printer is

powered has a sufficient capacity.

 Do not supply the printer from a power strip or current tap shared with

other appliances.

 Do not plug the power cord into an electric outlet with dust or debris

left on the plug.

 Do not use a deformed or damaged power cord.

 Do not move the printer while its power is on.

• Neglecting to handle it properly may result in printer failure, emission

of smoke, fire, or electric shock.

• An overload may cause the power cord to overheat, catch fire, or the

circuit breaker to trip.

 Do not allow anything to rest on the power cord. Do not place the

printer where the power cord may be stepped on.

 Do not use or carry the printer with its power cord bent, twisted, or

pulled.

 Do not attempt to modify the power cord unnecessarily.

 Do not place the power cord near any heating device.

• Neglecting these cautions may cause wires or insulation to break,

which could result in electric leakage, electric shock, or printer failure.

If the power cord sustains damage, contact your Citizen Systems

dealer.

 Do not leave things around the electric outlet.

 Supply power to the printer from a convenient electric outlet, readily

accessible in an emergency.

• Pull the plug to immediately shut it down in an emergency.

 Insert the power plug fully into the outlet.

 If the printer will not be used for a long time, disconnect it from its

electric outlet.

 Hold the plug and connector when plugging or unplugging the power

cord or signal cable after turning off the printer and the appliance

connected to it.

—6—

CAUTION

Caution label is attached in the position shown in the following figure. Carefully read

the handling precautions before using the printer.

 Do not transport this printer with the paper roll inside.

• Printer failure or damage may occur.

To prevent possible malfunction or failure observe the following.

 Do not open the paper cover during printing.

 Avoid operating the printer without paper properly loaded.

 Avoid the use of paper not complying with specifications.

• May result in poor print quality.

 Avoid using torn pieces of paper or paper spliced with plastic adhesive

tape.

 Avoid forcibly pulling already loaded paper by hand.

 Avoid using a sharp pointed device to operate panel buttons.

 Be sure to firmly insert the cable plugs into their mating sockets.

• A cross connection may damage the printer’s internal electronics or

the host system’s hardware.

 Only use the printer with devices that have designated solenoid

specifications for the cash drawer interface connector.

• Neglecting this caution may result in malfunction or failure.

THIS LABEL INDICATES THE

RISK OF BURNS DUE TO THE

HIGH TEMPERATURE OF THE

PRINT HEAD AND A RISK OF

BEING CUT BY THE MANUAL

AND AUTO CUTTERS WHILE

THE PAPER COVER IS OPEN.

—7—

CAUTION

To prevent injury and printer failures from worsening, observe the following:

 While the paper cover is open, be careful to not touch the manual

cutter that is in the paper eject slot.

 Do not touch the printing surface of the thermal head.

 Do not touch any of the moving parts (e.g., paper cutter, gears, active

electric parts) while the printer is working.

 In case of trouble do not attempt to repair the printer. Ask Citizen

Systems service for repair.

 Be careful that the covers do not pinch your hands or fingers.

 Be careful of the sharp edges on the printer. Do not allow them to

injure you or damage property.

• May result in electric shock, burn, or injury.

DAILY MAINTENANCE

Observe the following precautions for daily maintenance.

 When cleaning the printer, always turn it off and unplug it from the

electric outlet.

 Use a soft, dry cloth for cleaning the surface of the printer case.

For severe stains, use a soft cloth slightly dampened with water.

Never use organic cleaning solvent such as alcohol, paint thinner,

trichloroethylene, benzene, or ketone. Never use a chemically

processed cleaning cloth.

 To remove paper dust, use a soft brush.

CAUTION

• The thermal head is at a dangerously high temperature immediately after printing.

Allow it to cool off before starting maintenance work.

If the printer emits smoke, an odd smell, or unusual noise while

printing, immediately abort the current print session and

unplug the printer from the electric outlet.

Visit the following site to get documentation, drivers, utilities, and other

information.

http://www.citizen-systems.co.jp/english/support/index.html

—8—

1. GENERAL OUTLINE....................................................................9

1.1 Features........................................................................................... 9

1.2 Unpacking...................................................................................... 10

1.3 Model Classification ...................................................................... 10

1.4 Basic Specifications....................................................................... 11

2. EXPLANATION OF PRINTER PARTS .......................................12

2.1 Printer Appearance........................................................................ 12

2.2 Inside the paper cover ................................................................... 15

2.3 Other Built-in Functions................................................................. 16

3. SETUP........................................................................................18

3.1 Connecting the AC Power Cord .................................................... 18

3.2 Connecting Interface Cables ......................................................... 19

3.3 Bluetooth Interface Board ............................................................. 21

3.4 Ethernet (LAN) Interface Board ..................................................... 23

3.5 Wireless LAN Interface Board ....................................................... 26

3.6 Connecting the Cash Drawer ........................................................ 30

3.7 Precautions for Installing the Printer ............................................. 32

3.8 Partition for Paper Roll................................................................... 33

3.9 Setting the DIP Switch on the Serial Interface Board.................... 34

3.10 Adjusting the Paper Near-end Sensor.......................................... 35

3.11 Loading Paper .............................................................................. 36

3.12 Attaching the Power Switch Cover.............................................. 37

3.13 Attaching the Interface Cover...................................................... 38

3.14 Removing the Interface Cover..................................................... 38

3.15 Installing a Driver ......................................................................... 39

3.16 Precautions for Creating Applications and Practical

Operations ................................................................................... 39

4. MAINTENANCE AND TROUBLESHOOTING...........................40

4.1 Periodic Cleaning ........................................................................... 40

4.2 Clearing a Cutter Lock (1) .............................................................. 41

4.3 Clearing a Cutter Lock (2) .............................................................. 42

4.4 Self test ......................................................................................... 43

4.5 Hexadecimal Dump Printing .......................................................... 44

4.6 Error Messages ............................................................................. 45

4.7 Paper Jams.................................................................................... 47

4.8 Serial Interface Operation Precautions .......................................... 47

5. OTHER .......................................................................................48

5.1 External Views and Dimensions .................................................... 48

5.2 Printing Paper ................................................................................ 49

5.3 Manual Setting of Memory Switches............................................ 50

THE TABLE OF CONTENTS

—9—

The CT-S601II line thermal printer series is designed for use with a broad array

of terminal equipment including data, POS, and kitchen terminals.

These printers have extensive features so they can be used in a wide range of

applications.

 High-speed (220 mm/s) printing.

 Design so compact it can be installed anywhere (maximum 3-inch (83-mm)

paper roll size)

 Choose from two models with either 3-inch (83/80 mm) or 2-inch (60/58 mm)

wide paper rolls.

 Built-in power supply or AC adapter types available

 Printer status and errors indicated by LED and a buzzer

 Equipped with a fast and quiet cutter

 Easy to clear cutter jams

 USB power supply OFF

 Interchangeable interface

 Built-in cash drawer kick-out interface

 Memory switches make customization possible

 Store user-defined characters and logos on user memory

 Barcode and 2D barcode printing supported

 16 level greyscale and clear printing

 Paper saving functions

 Japanese Kanji, Chinese(simplified and traditional) and Hangul supported

 Driver and utility software included

 Apple MFi certified Bluetooth communication support (Bluetooth model)

1. GENERAL OUTLINE

1.1 Features

—10—

Make sure the following items are included with your printer.

Model numbers indicate printer features according to the following system.

Certain combinations may not be available. Check with Citizen beforehand.

Note:

*: AC power cord, serial I/F screw, firmware and other specifications vary according to markets.

1.2 Unpacking

 Printer: 1

 Interface cover: 1

 AC power cord: 1

 Power switch cover: 1

 Sample paper roll: 1 roll

 CD-ROM: 1

 Quick Start Guide: 2

 AC adapter

*1:1

 USB cable

*2:1

Notes:

*1: CT-S601IIA only

*2: USB interface types only

In designated markets

1.3 Model Classification

CT-S601IIS

(Built-in power supply type)

36AD3/37AD3 AC adapter built in

AC power cord

Power switch

cover

USB cable

Quick Start

Guide

CT-S601IIA

(AC adapter type)

AC adapter

(36AD2/37AD5)

AC power

cord

Quick Start

Guide

CD-ROM

USB cable

Sample

paper roll

Interface cover

Interface coverCD-ROM

Sample

paper roll

Power switch

cover

CT - S601IIS 3 RS E - BK - P

Power supply

DC:No power source

S: Built-in power supply type

A: AC adapter type

Interface

PA: Parallel

RS: Serial RS-232C

UB: USB only

UH: USB with hub

ET: Ethernet (standard type)

ES: Ethernet (multi-function type)

UP: Powered USB

BT: Bluetooth

WF: WiFi W5: WiFi(5.0GHz)

Market:

*

J: Japanese E: Europe

U: North America

C: China

A: Asia/Oceania

Paper width

3: 3 inch (80/83 mm)

2: 2 inch (58/60 mm)

Body case color

WH: Cool white

BK: Black

PNE sensor

:No

P: PNE sensor

—11—

1.4 Basic Specifications

Item Specifications

Model CT-S601II

Print method Line thermal dot print method

Print width

*1 80 mm/640 dots, 72 mm/576 dots, 64 mm/512 dots, 54.5 mm/436 dots,

54 mm/432 dots, 52.5 mm/420 dots, 48 mm/384 dots, 45 mm/360 dots,

48.75 mm/390 dots, 68.25 mm/546 dots

Dot density 8  8 dots/mm (203 dpi)

Print speed 220 mm/s (fastest, print density 100%, 1760 dot-lines/s)

Number of print

columns

*2

—

Maximum number of characters

(columns)

Dot configuration

(dots)

Paper width

83 mm 80 mm 60 mm 58 mm

Font

Font A 53483635 1224

Font B 71644846 9  24

Font C 80725452 8  16

Character size

*3 Font A: 1.50  3.00 mm

Font B: 1.13  3.00 mm

Font C: 1.00  2.00 mm

Character type Alphanumeric, international, PC437/850/852/857/858/860/863/864/865/866,

WPC1252, katakana, ThaiCode 11/18 (1Pass/3Pass), TCVN-3

User memory 384 KB (capable of storing user-defined characters and logos)

Bar code types UPC-A/E, JAN (EAN) 13/8 columns, ITF, CODE39, CODE128, CODABAR (NW-7),

CODE93, PDF417, QR Code, GS1-Databar

Line spacing 4.25 mm (1/6 inch) (changeable using commands)

Paper roll

Paper roll: 83 mm/80 mm/60 mm/58 mm  maximum 83 mm

Paper thickness: 65-75 m (core tube diameter: inner 12 mm/outer 18 mm)

75-85 m (core tube diameter: inner 25.4 mm/outer 32 mm)

Interface Serial (RS-232C compliant), parallel (IEEE 1284 compliant), USB, USB with

hub, Ethernet, Powered USB, Bluetooth(3.0), wireless LAN (802.11b/g or

802.11a/b/g/n)

Cash drawer kick-out Supports 2 cash drawers

Buffer size 4 k bytes/45 bytes

Supply voltage DC 24 V 5%

Power consumption Approximately 45 W (normal printing), 3 W (standby)

AC adapter

*4

(36AD2/3, 37AD3/5)

Rated input: AC 100 to 240 V, 50/60 Hz, 150 VA

Rated output: DC 24 V, 2.1 A

Weight CT-S601IIS: Approx. 2 kg, CT-S601IIA: Approx. 1.6 kg

Outside dimensions CT-S601IIS: 145 (W)  192 (D)  148 (H) mm

CT-S601IIA: 145 (W)  192 (D)  120 (H) mm

Operating temperature

and humidity

5 to 45°C, 10 to 90% RH (no condensation)

Storage temperature

and humidity

-20 to 60°C, 10 to 90% RH (no condensation)

Reliability Print head life: 150 km, 200 million pulses (at normal temperature and

humidity using recommended paper)

Auto cutter life: 2 million cuts (at normal temperature/humidity, using

recommended paper and paper thickness)

Safety standard

*5 UL, C-UL, FCC Class A, TÜV-Bauart, CE Marking

+0

-1

+0

-1

+0

-1

+0

-1

—12—

Notes:

*1: When paper width is 83, 80, 60, or 58 mm.

*2: The number of printable columns is selected using a memory switch.

The number of columns noted in this table refer to typical models. The number of columns varies

depending on specifications.

*3: Characters appear small because the dimensions include a blank area surrounding each

character.

*4: The 36AD2/37AD5 is the AC adapter packaged as an accessory with the CT-S601IIA.

The 36AD3/37AD3 is the AC adapter built in to the CT-S601IIS.

*5: Compliant if the Citizen Systems AC adapter (36AD2/3, 37AD3/5) is used.

Names of parts

 Paper cover

Open to load paper.

 Cover open lever

Use this lever to open the paper cover.

 Front cover

Open and close this cover to clear a cutter lock.

 Front cover release button

Press this button to open the front cover.

2. EXPLANATION OF PRINTER PARTS

2.1 Printer Appearance

Refer to 4.3 Clearing a Cutter Lock (2)

Paper cover

Rear connectors

Maintenance cover

Power switch

Operation panel

Cover open lever

(Front view) (Rear view)

Front cover

release button

—13—

 Power switch

Press this button to turn the power on or off.

 Maintenance cover

Not used. Do not remove.

Operation panel

 POWER LED (green)

Lights when the power is on, turns off when the power is off.

Flashes when data is incoming or a memory error has occurred.

 PAPER LED (orange)

Lights orange when paper is low (paper near-end) or there is no paper (paper

end).

 ERROR LED (red)

Flashes if the print head is hot, the paper cover is open, a cutter lock occurs,

and so forth.

 FEED button

Press this button to feed paper.

In case of a cutter lock, remove the cause of the lock, close the paper cover,

and then press the FEED button.

The printer enters the mode for setting memory switches and running self

test.

CAUTION

Do not open the maintenance cover.

Refer to 4.4 Self test

Refer to 4.6 Error Messages

Refer to 5.3 Manual Setting of Memory Switches

POWER LED (green)

PAPER LED

(orange)

ERROR LED (red)

FEED button

—14—

Rear connectors

 Interface connector (serial, parallel, USB, etc.)

Connects to the interface cable.

The serial interface board is equipped with a DIP switch.

 Cash drawer kick-out connector

Connects to the cable from the cash drawer.

 Power connector (AC adapter type)

Connects to the AC adapter cable.

 AC inlet (built-in power supply type)

Connects to the AC power cord.

Interface connector

(serial, parallel, USB, etc.)

Cash drawer

kick-out

connector

Power connector (AC adapter type)

AC inlet (built-in power supply type)

—15—

 Platen

Feeds the paper.

Do not remove the platen except to do maintenance.

 Paper near-end sensor (PNE sensor)

Detects when the paper is near the end of the roll. Adjust the position of the

sensor to determine when it detects the end of the paper is near.

 Button to change paper near-end sensor

Change the position of the paper near-end sensor to match the paper being

used.

 Manual cutter

For cutting the paper manually when printing is finished.

 Auto cutter

Automatically cuts the paper when printing is finished.

 Print head (thermal)

Prints characters and graphic data on paper (paper rolls).

 Paper end sensor (PE sensor)

Detects when there is no paper. Printing stops when this sensor detects there

is no paper.

2.2 Inside the paper cover

Refer to 3.10 Adjusting the Paper Near-end Sensor

Refer to 5.3 Manual Setting of Memory Switches

Platen

Button to change paper

near-end sensor

Print head (thermal)

Auto cutter

Paper near-end sensor

(PNE sensor)

Paper-end sensor

(PE sensor)

Manual cutter

—16—

 Buzzer

Buzzes when errors occur or when operations or command operations are

performed.

 User memory

You can save user-defined logo and character data in this memory. Data

remains stored in this memory even if the printer is turned off. For

information on how to save data, refer to the Command Reference.

 Memory switch

Setting of various kinds of functions can be stored in memory. Settings

remain stored in the memory even if the printer is turned off.

 USB power supply OFF (When memory switch MSW6-3 is set to ON)

When the printer is connected to a PC by USB, turning off PC power or terminating

the USB connection causes printer USB power to turn off three seconds later.

This mode is canceled when the PC is turned back on or when a USB connection

is established.

 Paper saving functions

Memory switches MSW8-3 through MSW8-5 can be used to configure the

settings below, which save paper.

•Top margin suppression

The printer back feeds the paper before printing which reduces the blank space

at the top edge of the paper.

The back feed amount can be specified.

•Line gap reduce

Automatically compresses the linefeed amount between lines. The compression

ratio can be specified.

•Text compression vertical/horizontal

Makes the print size smaller.

The compression amount is specified by a combination of vertical and horizontal

compression ratios.

 Auto side shift (MSW8-6)

This function dissipates heat load during frequent heat generation by a vertical

ruled line or other specific head heating element.

2.3 Other Built-in Functions

Refer to 4.6 Error Messages

CAUTION

 The POWER LED is unlit when USB power supply is OFF, and the power OFF state cannot

be identified.

 Pressing POWER while USB power is off does not turn on power immediately. After a

while, USB power supply OFF is canceled and pressing POWER turns on power normally.

La pagina si sta caricando...

Citizen CT-S601II Manuale utente

Citizen CT-S601II Manuale utente

in altre lingue

Documenti correlati

Altri documenti