NEC MutiSync M500 JC-1572VMB-1 Manuale del proprietario

MultiSync M-Series

User’s Manual

Declaration of the Importer

We hereby certify that the color monitors

MultiSync M500 JC-1572VMB

MutiSync M500 JC-1572VMB-1

MultiSync M700 JC-1735VMB

are in compliance with

Council Directive 73/23/EEC:

- EN 60950

Council Directive 89/336/EEC:

- EN 55022

- EN 60555-2

- EN 60555-3

- EN 50082-1

(IEC 801-2)

(IEC 801-3)

(IEC 801-4)

and marked with

NEC Europe Ltd. Ismaning Office

Steinheilstraße 4-6

D-85737 Ismaning, Germany

Safety Instruction

Caution:

When operating the JC-1572VMB/JC-1572VMB-1/JC-1735VMB with

a 220-240V AC power source in Europe except UK, use the power cord

provided with the monitor.

In UK, a BS approved power cord with moulded plug has a Black (five

Amps) fuse installed for use with this equipment. If a power cord is not

supplied with this equipment please contact your supplier.

When operating the JC-1572VMR/JC-1735VMR with a 220-240V AC

Power source in Australia, use the power cord provided with the

monitor.

For all other cases, use a power cord that matches the AC voltage of the

power outlet and has been approved by and complies with the safety

standard of your particular country.

IBM PC/XT/AT, PS/2, MCGA, VGA, 8514/A and XGA are registered trademarks of

International Business Machines Corporation.

Apple and Macintosh are registered trademarks of Apple Computer Inc.

Microsoft and Windows are registered trademarks of the Microsoft Corporation.

NEC is a registered trademark of NEC Corporation. ErgoDesign, IPM, OSM, ColorControl,

OptiClear, C

ROMACLEAR and Advanced Digital Control System are trademarks of NEC Home

Electronics, Ltd.

MultiSync is a registered trademark of NEC Technologies, Inc in U.S., and of NEC Home

Electronics, Ltd in Canada, U.K., Germany, France, Spain, Italy, Austria, Benelux,

Switzerland, Denmark, Finland, Norway and Saudi Arabia.

All other trademarks or registered trademarks are property of their respective owners.

English

Deutsch

Français

Italiano

Español

Appendix

English

Introduction

Congratulations on your purchase of NEC’s MultiSync M Series color

monitor! The MultiSync M Series monitor delivers superior image quality

for all your sound-based applications. The built-in amplified speakers,

microphone and headphone jack, deliver the high-performance that you

need to take advantage of all your multimedia applications.

The fully-amplified speakers deliver clear, crisp sound and are

magnetically shielded for worry-free use with the monitor. And the

built-in microphone will allow you to take full advantage of the voice

communication/telephone capabilities of your system. The MultiSync M

Series monitor is designed for all of your multimedia needs and

delivered in a distinctive monoform cabinet.

Other features that enhance the MultiSync M Series monitor’s

performance are the C

ROMACLEAR CRT, Microsoft’s Plug and Play

compatibility, NEC’s ErgoDesign properties and the On-Screen

Manager (OSM) Controls.

CROMACLEAR CRT Technology

The MultiSync M Series monitor features NEC’s exclusive

C

ROMACLEAR CRT (Cathode Ray Tube), the latest advancement in

display technology. This technology, patented by NEC, delivers images

with more clarity than found in traditional dot-trio CRTs. Unlike the

conventional shadow mask with phosphor dots, C

ROMACLEAR CRT has

ellipse-shaped phosphors. Screen images have higher definition, color

saturation and more depth and dimension.

The C

ROMACLEAR CRT has Dynamic Beam Focus which provides

precise and continuous focus adjustment of the electron beams.

Dynamic beam focus provides optimum image quality, even to the far

edges of the screen. You will notice a significant difference in the focus

and clarity of the image for realistic text, graphics and video.

The OptiClear Surface of the M Series CRT dramatically reduces the

reflection of ambient illumination and glare resulting in greatly

improved user comfort and productivity. This multilayered screen

Introduction E - 1

coating increases the contrast without sacrificing the focus level, clarity

or brightness.

A high contrast screen with a .25 mm mask pitch sharpens image clarity

and enhances detail. On-screen information is easier to read.

The flat square CRT technology reduces image distortion and glare.

Plug and Play

Plug and Play is the new Microsoft

®

solution with Windows

®

95 to

provide automatic peripheral connections without confusing and

time-consuming setup. When used with a Plug and Play compatible system

and video card, the MultiSync M series monitor automatically tells the

system its identification and capabilities. The system will then select its

highest resolution and refresh rate to take advantage of your MultiSync

monitor.

ErgoDesign

The MultiSync ErgoDesign features enhance human ergonomics

(human and earth conditions). MultiSync monitor’s ErgoDesign will

improve the working environment, protect the health of the user and

save money. ErgoDesign parallels the strict European standards of

power management and reduced emissions:

– automatic display power-down (also known as NUTEK

specification 803299)

– emission characteristics (stricter than those referred to as

reduced electromagnetic fields as recommended by MPR II

and, for JC-1572VMB-1 and JC-1735VMB, also by TCO)

– safety (EN 60950)

MultiSync monitors comply with these standards by offering IPM

System power management and Reduced Magnetic Field technology.

Power Manager

IPM (Intelligent Power Manager) System is an innovative power-saving

utility that complies with both the EPA’s Energy Star requirements and

Europe’s TCO NUTEK’s power management requirements. Energy Star

E - 2 Introduction

products use less than 30 watts when in the main power saving mode.

The NUTEK specification 803299 requires automatic power down to

less than 30 watts in the suspend mode and less than 8 watts in the off

mode.

When in the maximum power-down mode, the MultiSync M Series

monitor will consume approximately 10% of the total power drawn

under normal operation. This innovation adds up to 90% energy savings,

longer monitor life, environmental protection, reduced emissions and

reduced air conditioning costs of the work environment. The IPM

System increases the monitor’s life and saves energy and costs by

powering down when not in use.

MultiSync monitors follow the Video Electronics Standard Association

(VESA) approved DPMS power-down signalling method. VESA’s

Display Power Management Signalling (DPMS) method, which is

endorsed by the EPA, is the power-down process a system should use to

communicate to the monitor to save power. Power-down functions can

be utilised only with an Energy Star system or video card which adheres

to the VESA DPMS standard. By using the monitor’s horizontal and

vertical SYNC signals, the monitor can be prompted into the different

IPM modes. The following is the description of the LED indicator for

the IPM power-saving modes:

Mode LED Indicator Power Saving

On Green None

Stand By Green Minimum (Quickest Recovery)

Suspend Yellow Moderate (< 30 Watts, Moderate

Recovery)

Off (IPM Mode) Orange Maximum (< 8 Watts, Slow Recovery)

Off (Power

Switch, Off)

No Light No Power Used (Fully Off)

Introduction E - 3

Reduced Emissions

The M Series monitor incorporates Reduced Magnetic Field technology

designed to reduce magnetic and alternating electric field emissions and static

electricity. NEC’s monitors follow the strictest magnetic field, alternating

electric field, and electrostatic recommendations of the Swedish Board for

Technical Accreditation, or SWEDAC (previously known as MPR, National

Board for Measurement and Testing). The JC-1572VMB-1 and

JC-1735VMB follow the recommendations of the TCO which specify

maximum recommended values of electric and magnetic fields.

Multiple Frequency Technology

Multiple Frequency Technology automatically adjusts the monitor to the

video card’s scanning frequency, displaying the resolution you desire.

The MultiSync M Series color monitor also supports multiple operating

platforms such as PC compatible, Macintosh family and workstation

systems.

Increased refresh rates at all resolutions provide a flicker-free image.

The clearer image is easier on your eyes and extends your viewing time.

A wide range of graphics standards, including VESA standards, is

supported by the MultiSync M Series color monitor including:

– 640 x 480: 55 - 120 Hz vertical refresh

– 800 x 600: 55 - 105 Hz vertical refresh

– 1024 x 768: 55 - 85 Hz vertical refresh (non-interlaced, 75 Hz

recommended)*

– 1280 x 1024: 55 - 65 Hz vertical refresh (non-interlaced)**

* NEC cites recommended resolutions for optimal display performance

** Maximum resolution based on horizontal and vertical frequencies only.

And Macintosh resolutions, such as:

– MAC II 640 x 480 at 67 Hz

– Macintosh 832 x 624 at 75 Hz

– Macintosh 1024 x 768 at 75 Hz

– Macintosh 1152 x 870 at 75 Hz (only for M700)

E - 4 Introduction

Horizontal and vertical FullScan capability can increase the display size

of a variety of video modes to the edges of the monitor bezel. The

FullScan capability allows you to use the entire screen area in most

resolutions, significantly expanding image size.

Contents of the Package

Included with your MultiSync M Series color monitor are the following

items:

– MultiSync M500 (JC-1572VMB/R, 1572VMB-1) /

M700 (JC-1735VMB/R) with removable tilt/swivel stand

– Power cord

– Speaker cord

– User’s manual

Recommended use

For optimum performance when setting up and using the MultiSync M

series colour monitor, please note the following:

The optimum monitor position is away from direct sunlight.

Place the monitor just below eye level for the ideal viewing angle.

Allow adequate ventilation around the monitor so that heat can properly

dissipate.

Contents of the Package E - 5

Do not place any heavy objects on the power cord. Damage of the cable

may cause shock or fire.

Keep the monitor away from high capacity transformers, electric motors

and other devices which may create strong magnetic fields.

Use the monitor in a clean, dry area.

Handle with care when transporting.

We recommend to adjust the brightness in a way that the

background raster disappears.

For ergonomical reasons we recommend not to use the position of

the maximum contrast control.

For ergonomical reasons the preset size and position is

recommended with the standard signals.

For ergonomical reasons preset colour setting and preset

side-pincushion setting is recommended.

For ergonomical reasons we recommend using non-interlaced

signals with a vertical refresh rate between 75 and 120 Hz.

For ergonomical reasons we recommend not to use the primary colour

blue on dark background ( it is difficult to recognise and produces eye

fatigue due to insufficient contrast).

To separate the equipment from the power source you have to

remove the plug from the inlet socket.

The power outlet socket should be installed as near to the equipment as

possible, and should be easily accessible.

We recommend using the power cord supplied with the monitor.

However, if another type of power cord is required, power cord

H05VV-F should be used except in U.K.

To clean the CRT surface use a lint-free, non-abrasive cloth and a

neutral cleaner based, non-abrasive cleaning solution or glass

cleaner for best results.

Adjust the speaker volume so that no interference is caused to the

picture image.

E - 6 Recommended use

Quick Start

The following chart summarises the connection process for the

MultiSync M Series.

For more details please turn to the following pages if you are connecting

to an IBM compatible, Macintosh compatible or other systems.

Is the computer a Macintosh

Computer?

Use the optional MultiSync

Mac adapter to attach the

monitors signal cable to the

Macintosh video output.

Attach the signal cable of the moni-

tor to the video board/Mac adapter.

Connect the power cord of the

monitor to the power outlet and to

the monitor itself.

Turn monitor and computer on.

If necessary, use the OSM controls

for personal preference of the image.

Is the image correct?

Enjoy your monitor.

Problem solved?

Call your NEC-Dealer

Yes

No

Yes

No

Yes

See the Trouble Shooting section

Quick Start E - 7

Connection to Your Personal Computer

The MultiSync M Series color monitor complements NEC computers,

PC compatibles, Macintosh and Macintosh compatibles.

For the PC:

Your system has one of two configurations:

– the video controller is built into the computer

– the video controller is in the form of a display card (sometimes

referred to as the graphics card, video adapter or graphics board)

Both configurations have a video connector (or a CRT PORT on laptop

computers). If you are not sure which port is the video connector, please

consult your computer or display card manual.

For the Mac:

With the optional MultiSync M Series Macintosh Cable Adapter, the

MultiSync M Series color monitor is compatible with Macintosh

computers, as well as Macintosh clones.

NOTE: Power Macintosh 6100/60 users need to use the Apple HDI-45

cable adapter in conjunction with the appropriate MultiSync Cable

Adapter when connecting a MultiSync monitor.

The MultiSync M Series Macintosh Cable Adapter allows you to

change between 640 x 480, 832 x 624, 1024 x 768 and (1152 x 870:

only for M700) screen resolutions without restarting your system, if the

video port supports these modes. You will connect your MultiSync M

Series monitor one of two ways to your Macintosh computer:

– On-board video port

– NuBus, PDS or PCI display card

Both configurations should have the same style video connector. If you

are not sure which port is the video connector, please consult your

computer or display card manual.

Please contact your local dealer for information about the Mac Adapter.

E - 8 Connection to Your Personal Computer

To attach the MultiSync M Series monitor to your system, follow these

instructions:

1. Turn off the power to your computer and MultiSync monitor.

2. If necessary, install the display card. For more information,

refer to the display card manual.

3. For the PC: Connect the MultiSync M Series monitor’s

video cable to the display card’s connector on the computer.

Tighten screws on all connectors.

For the Mac: Connect the MultiSync M Series Macintosh

Cable Adapter to the monitor’s connector on your computer.

Connect the MultiSync M Series monitor’s signal cable to the

other end of the cable adapter. Tighten screws on all

connectors.

4. Locate the audio output connection on the component(s)

which will serve as the source(s) for the built-in speakers.

(The component(s) could be your system, CD-ROM, sound

card, etc.).

5. Once you have determined the source, identify the connector

present from the source and connect the appropriate end of

the stereo input cable.

6. Connect the other end of the stereo input cable to the input

marked “ ” on the rear of the monitor.

Headphone

Headphones may be connected to the “Headphones” output on

the left of the monitor’s bezel. “ ” While the headphones

are connected, the sound from the speakers will be disabled.

Headphones can be purchased from your local electronic store.

Microphone

To take advantage of the built-in microphone, a stereo-male

mini jack cable can be purchased from your local computer

dealer/electronic store. Connect one end of the stereo-male

mini jack cable to the microphone (MIC IN) input on the rear

Connection to Your Personal Computer E - 9

of your system. Connect the other end of the stereo-male mini

jack cable to the input located on the back of the monitor

marked “ “ located to the left of the speaker input.

NOTE: There is a microphone hole on the front of the

monitor marked “ ”. This is the location of the built-in

microphone. This is not to be used for the input for the mini

jack cable. Please take care only to plug in the cable to the

input on the rear of the monitor, also marked “ ”.

7. Connect one end of the power cable to the MultiSync M

Series monitor and the other end to the power outlet.

8. Turn on your MultiSync monitor and computer.

9. This completes the installation.

NOTE: If you have any problems, please refer to the

Troubleshooting section of this manual.

E - 10 Connection to Your Personal Computer

On-Screen Manager (OSM )

Now, On-Screen Manager (OSM ) Controls have made the MultiSync

monitor’s Advanced Digital Control System easier to use by providing

menus on screen. A touch of the up front controls turns on OSM,

allowing you to easily navigate through menus and adjust controls.

OSM allows you to control the built-in speakers, as well as controls

such as Brightness, Contrast, Size, Position, Geometry, Video Boost and

other OSM Utilities. User adjustments are saved automatically when

you change menus. Controls can be reset to factory settings by pressing

the reset button.

The enhanced Color Control System allow you to adjust the colours on

your screen and customise the color accuracy of your monitor. Through

the OSM’s enhanced Color Control System, you can better match your

image color to a variety of standards, such as:

– Your personal preference (depending upon the application

used).

– Another monitor.

– Your printer or Service Bureau output.

You can also access five industry standard color temperature settings

and customise and store up to five personal settings.

On-Screen Manager (OSM ) E - 11

OSM buttons on the front of the monitor function as follows:

Main Menu Sub-Menu

EXIT Exits the OSM Controls. Exits to the OSM main

menu.

CONTROL ▼/▲ Moves the highlighted

area up/down to select

one of the controls

Moves the highlighted

area up/down to select

one of the controls.

CONTROL+/- Moves highlighted area

left/right to select

direction one of the

controls

Moves the bar in the +

or – direction to increase

or decrease the

adjustment.

PROCEED Has no function Only executes control or

enters sub, sub-menu

RESET/ MUTE Resets all the controls

within the highlighted

menu to the factory

setting

Resets the highlighted

control to the factory

setting.

NOTE: When RESET is pressed in the main and sub-menu, a warning

window will appear allowing you to cancel the reset function.

NOTE on MUTE button: OSM does not need to be activated to operate

the mute function for the speakers. To quickly turn off the sound of the

speaker, simply press the MUTE button. To disable the mute function

and restore the sound, press the MUTE button again.

E - 12 On-Screen Manager (OSM )

OSM Elements:

On-Screen Manager windows typically have the following elements:

Highlight: Indicates the selected menu or control in green. Inactive tab

is indicated in yellow.

Scroll Bar: Indicates direction of adjustment.

Accessing OSM: Press any of the control buttons +/-, ▼/▲ or the

PROCEED or EXIT button to view the current settings.

Turning off OSM:

– When in the main menu: Press the EXIT button.

– When in the sub-menu: Press the EXIT button twice.

– When in the sub, sub-menu: Press the EXIT button three times.

OSM Menus

Main Menu

OSM’s main menu of control icons gives you an overview of the

selection of controls available. When OSM is activated, icons are

displayed at the top of the menu.

If an arrow button is displayed (⇒), it indicates further choices are

available. Use the▲/▼ control buttons to scroll through all of the options.

VOLUME

TREBLE

BASS

BALANCE

OSM Menus E - 13

The icons control the following:

Speaker Controls:

Volume: Increases or decreases the volume of speakers.

Treble: Increases or decreases the treble.

Bass: Increases or decreases the bass.

Balance: Adjusts the balance between the right and left speakers.

For additional sound controls, please see the Tools Icon.

Brightness/Contrast Control

Brightness: Adjusts the overall image and background screen

brightness.

Contrast: Adjusts the image brightness in relation to the background.

Video Boost: Default is the Off Mode. When activated, maximises

contrast and brightness for optimal viewing of video and television.

Video Boost is positioned towards the center of the screen. The size of

the window is selectable from 1/4,1/3,1/2 and full screen. The window

will be active when OSM is exited.

Degauss: Eliminates the build-up of stray magnetic fields which alter

the correct scan of the electron beams and affect the purity of the screen

colours, focus, and convergence. When activated, your screen image

will jump and waver a bit as the screen is demagnetised.

Caution: Please allow a minimum of 20 minutes to elapse between uses

of the Degauss function.

Size and Position

Left/Right: Moves the image horizontally (left or right).

Up/Down: Moves the image vertically (up or down).

Narrow/Wide: Increases or decreases the horizontal size of the image.

Tall/Short: Increases or decreases the vertical size of the image.

E - 14 Brightness/Contrast Control

La pagina sta caricando ...

NEC MutiSync M500 JC-1572VMB-1 Manuale del proprietario

Questo manuale è adatto anche per

NEC MutiSync M500 JC-1572VMB-1 Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti