KYOCERA CS-4050 Manuale del proprietario

Tipo
Manuale del proprietario
Operation Guide
Einführung
Guía de uso
Manuel d’utilisation
Guida alle funzioni
使用説明書
DF-710
MT-710
BF-710
PH-5A, PH-5B, PH-5C
This section uses illustrations to explain operation of the finisher when installed to a full-
color machine. Usage operation is the same when installed to other machines.
This guide mainly explains usage when used with the copier feature. See the Extended
Driver User Guide for more information on usage from a computer when using the
printer feature.
In diesem Abschnitt wird mit Abbildungen der Gebrauch des Finishers beschrieben,
wenn dieser auf einem Vollfarbenkopierer installiert ist. Der Gebrauch ist derselbe bei
Installation an anderen Geräten.
Dieses Handbuch beschreibt hauptsächlich den Gebrauch bei Verwendung der
Kopiererfunktion. Weitere Informationen zum Gebrauch am Computer mit der
Druckerfunktion siehe Extended Driver User Guide (Ausführliches Treiber-
Bedienerhandbuch).
Esta sección usa ilustraciones para explicar el funcionamiento de la unidad acabadora
cuando está instalada en una máquina a todo color. El funcionamiento es el mismo
cuando está instalada en otras máquinas.
Esta guía explica, sobre todo, el funcionamiento cuando se usa con la función de
copiadora. Si desea más información acerca del funcionamiento desde un ordenador
usando la función de impresora, consulte la Guía de uso ampliada de controladores.
Cette section utilise des illustrations détaillant le fonctionnement du finisseur de
documents installé sur une machine couleur. Le fonctionnement est le même lorsque
le finisseur de documents est installé sur d’autres machines.
Le présent manuel détaille essentiellement le fonctionnement lors de l’utilisation avec
la fonction copieur. Pour plus d’informations sur le fonctionnement depuis un ordinateur
lors de l’utilisation de la fonction copieur, reportez-vous au Manuel d’utilisation du pilote
étendu.
Questa sezione utilizza illustrazioni per spiegare il funzionamento del finisher una volta
installato in una copiatrice a colori. Il funzionamento non cambia in caso di installazione
in altre macchine.
La presente guida spiega l’utilizzo della macchina come copiatrice. Fare riferimento alla
Guida utente driver dettagliata per maggiori informazioni sull’utilizzo da un computer
come stampante.
本書ではフィニッシャをフルカラー機に設置した場合のイラストで説明しています。
他の機種をお使いの場合でも操作方法は同じです。
本書はコピー機能を使用した場合の操作方法を中心に説明していますので、プリン
タ機能を使用した場合のコンピュータからの操作方法については、KX プリンタドラ
イバ操作手順書を参照してください。
DF-710, MT-710, BF-710, PH-5A, PH-5B AND PH-5C OPERATION GUIDE 1
1English
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Names of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
2 Deutsch
Sicherheitshinweise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Komponenten. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Betrieb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Wartung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Störungsbeseitigung. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Technische Daten. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
3 Español
Información de seguridad. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Nombres de los componentes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Funcionamiento . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Mantenimiento . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89
Solución de problemas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93
Especificaciones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
4 Français
Informations de sécurité. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
Nomenclature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
Fonctionnement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Entretien. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127
Dépannage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131
Spécifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147
5Italiano
Informazioni sulla sicurezza . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149
Componenti . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154
Modalità di funzionamento . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155
Manutenzione. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163
Risoluzione dei problemi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167
Specifiche. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183
6 日本語
安全に正しくお使いいただくために . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .185
各部の名称 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189
操作のしかた . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .190
日常のメンテナンス. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .198
困ったときは . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .202
仕様 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .219
2 DF-710, MT-710, BF-710, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
DF-710, MT-710, BF-710, PH-5A, PH-5B AND PH-5C OPERATION GUIDE 3
1English
Safety Information
ALWAYS read this Operation Guide thoroughly before use. After reading, keep it together
with the Operation Guide for the machine to install this Finisher (hereinafter, the machine).
Refer to the Operation Guide for the machine for information on the service representative
for your product.
The sections of this Operation Guide and parts of this product marked with symbols are
safety warnings. These are designed to protect the user, other individuals and surrounding
objects, and ensure correct and safe usage of the product.
Symbols
The symbol indicates that the related section includes safety warnings. Specific points
of attention are indicated inside the symbol.
The symbol indicates that the related section includes information on prohibited actions.
Specifics of the prohibited action are indicated inside the symbol.
The
z symbol indicates that the related section includes information on actions which must
be performed. Specifics of the required action are indicated inside the symbol.
Please contact your service representative to order a replacement if the safety warnings in
this Operation Guide are illegible or if the guide itself is missing (fee required).
DANGER: Indicates that serious injury or even death will very possibly result
from insufficient attention to or incorrect compliance with the related points.
WARNING: Indicates that serious injury or even death may result from
insufficient attention to or incorrect compliance with the related points.
CAUTION: Indicates that personal injury or mechanical damage may result
from insufficient attention to or incorrect compliance with the related points.
....
[General warning]
....
[Warning of prohibited action]
....
[Disassembly prohibited]
....
[Alert of required action]
....
[Remove the power plug from the outlet]
....
[Always connect the machine to an outlet with a ground connection]
English
4 DF-710, MT-710, BF-710, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
CAUTION LABELS
Caution labels have been attached to the Document Finisher at the following locations for
safety purposes. BE VERY CAREFUL to avoid getting your fingers caught in or burned by
the finisher when clearing a paper jam.
NOTE: DO NOT REMOVE THESE LABELS.
LABEL 1
CAUTION: Paper is ejected into
the eject section at high speeds.
Do not look into the eject section
while the machine is in operation.
LABEL 2
The interior of this section reaches high
temperatures. DO NOT touch this section
as there is a danger of being burned.
LABEL 3
DO NOT place any objects underneath
Tray A.
English
DF-710, MT-710, BF-710, PH-5A, PH-5B AND PH-5C OPERATION GUIDE 5
INSTALLATION PRECAUTIONS
Environment
CAUTION
Avoid placing this product on or in locations which are unstable or not level. Such
locations may cause the product to fall down or fall over. This type of situation
presents a danger of personal injury or damage to the product.
Avoid locations near radiators, heaters, or other heat sources, or locations near
flammable items, to avoid the danger of fire.
Other precautions
Depending upon the location in which this product is installed, adverse environmental
conditions may affect its performance. Ensure this product is installed in an air-conditioned
room (recommended room temperature: around 73.4°F (23°C), humidity: around 50%) and
avoid the following locations when selecting a site for installation:
bright locations near a window or with exposure to direct sunlight
locations with vibrations
locations with drastic fluctuations in temperature or humidity
locations with direct exposure to hot or cold air
Handling of plastic bags
WARNING
Keep the plastic bags that are used with this product away from children. The plastic
may cling to their nose and mouth causing suffocation.
PRECAUTIONS FOR USE
Cautions when using this product
WARNING
DO NOT place metallic objects or containers with water (flower vases, flower pots,
cups, etc.) on or near this product. This type of situation presents a danger of fire or
electrical shock should any water fall inside.
DO NOT damage, break or attempt to repair the signal line. DO NOT place heavy
objects on the signal line, pull it, bend it unnecessarily or cause any other type of
damage. These types of situations present a danger of fire or electrical shock.
NEVER attempt to repair or disassemble this product or its parts as there is a danger
of injury or fire.
If this product becomes excessively hot, smoke appears, there is an odd smell, or
any other abnormal situation occurs, there is a danger of fire or electrical shock.
Immediately turn OFF (O) the machine’s main power switch, remove the machine’s
power plug from its outlet and contact your service representative.
English
6 DF-710, MT-710, BF-710, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
If anything harmful (paper clips, water, other fluids, etc.) falls into this product, turn
OFF (O) the machine’s main power switch immediately, remove the machine’s
power plug from its outlet and contact your service representative. If you continue to
use this product without taking these steps, there is a danger of fire or electrical
shock.
ALWAYS contact your service representative for maintenance or repair of internal
parts.
CAUTION
For safety purposes, ALWAYS turn OFF (O) the machine’s main power switch and
remove the machine’s power plug from its outlet when performing cleaning
operations on this product.
DO NOT touch the ejection tray when the product is in operation as there is a danger
of injury.
If dust accumulates within this product, there is a danger of fire or other problems. It
is therefore recommended that you consult with your service representative in
regard to cleaning of internal parts. This is particularly effective if performed prior to
seasons of high humidity. Consult with your service representative in regard to the
cost of cleaning the internal parts of the product.
Other Precautions
DO NOT place heavy objects on this product or cause other damage to the product.
When lifting or moving the product, contact your service representative.
Do not touch electrical parts, such as connectors or printed circuit boards. They could be
damaged by static electricity.
DO NOT attempt to perform any operations not explained in this Operation Guide.
English
DF-710, MT-710, BF-710, PH-5A, PH-5B AND PH-5C OPERATION GUIDE 7
Names of Parts
Document Finisher (main body)
1 Tray A
2 Tray B
3 Tray C
4 Finisher release lever
5 Front cover
6 Top cover
7 Paper guide plate (D1)
8 Conveyor knob (D2)
9 Internal tray paper holder (D3)
10 Internal tray confirmation window
11 Internal tray (D5)
12 Internal tray cover (D6)
13 Internal tray cover (D7)
14 Staple cartridge holder A
15 Right cover (D8)
16 Pressure roller bottom adjust knob (E1)
17 Pressure roller top adjust knob (E2)
Hole Punch Unit (option)
18 Waste Hole Punch box
Center-Folding Unit (option)
19 Unit release lever
20 Paper guide plate (D9)
21 Center-Folding Unit conveyor knob
(D10)
22 Center-Folding Unit top cover
23 Folding tray
24 Staple cartridge holder B
25 Staple cartridge holder C
Mailbox (option)
26 Trays 1 - 7
27 Mailbox cover
1
5
4
2
3
6
7
16 17 8
1514
18
27
26
913
11
12
10
21
23 19
22
20
25
24
English
8 DF-710, MT-710, BF-710, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
Operation
Sort: ON Mode
Sorts copies of multiple originals into identical
sets.
The following paper sizes can be used in Sort:ON
Mode:
A3, B4, A4, A4R, B5, Folio, 11
× 17",
8
1/2 × 14", 8 1/2 × 13 1/2", 8 1/2 × 13",
8
1/2 × 11", 11 × 8 1/2", 8K and 16K
1
Select Sort: On Mode on the operation panel of the machine.
2
Load the originals in the Document Processor, or
one at a time on the Platen.
NOTE: Refer to the Operation Guide for the
machine for Document Processor and Platen
specifications.
3
Select other features as required and press Start.
4
Copies are ejected onto the specified tray.
If Tray A is selected, each copy set can be offset
from the previous set. Refer to the Operation
Guide for the machine for further details.
The machine displays a message when Tray A,
Tray B and Tray C have reached their tray
capacity. Remove all copies from each tray when
this message is displayed.
NOTE: The maximum number of copies that can be stored on Tray A, Tray B and Tray C
differs depending on the size of copy paper being used. For further information refer to
page 36.
5
On completion of the job, remove the copies.
English
DF-710, MT-710, BF-710, PH-5A, PH-5B AND PH-5C OPERATION GUIDE 9
Sort: OFF Mode
Groups the copies of each individual original
together in one stack.
The following paper sizes can be used in
Sort:OFF Mode:
A3, B4, A4, A4R, B5, Folio, 11
× 17",
8
1/2 × 14", 8 1/2 × 13 1/2", 8 1/2 × 13",
8
1/2 × 11", 11 × 8 1/2", 8K and 16K
1
Select Sort: Off Mode on the operation panel of the machine.
2
Load the originals in the Document Processor, or
one at a time on the Platen.
NOTE: Refer to the Operation Guide for the
machine for Document Processor and Platen
specifications.
3
Select other features as required and press Start.
4
Copies are ejected onto the specified tray.
If Tray A is selected, each stack can be offset from
the previous stack. Refer to the Operation Guide
for the machine for further details.
The machine displays a message when Tray A,
Tray B and Tray C have reached their tray
capacity. Remove all copies from each tray when
this message is displayed.
NOTE: The maximum number of copies that can be stored on Tray A, Tray B and Tray C
differs depending on the size of copy paper being used. For further information refer to
page 36.
5
On completion of the job, remove the copies.
English
10 DF-710, MT-710, BF-710, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
Staple Mode
Sorts and staples each copy set.
Stapling options are as follows:
Upper Left Single Staple
Upper Right Single Staple
Double Staple
NOTE: Only Tray A is used during staple
mode. For stapling specifications, refer to
page 36.
Auto Selection Staple Mode
Staple mode is available even if the paper size is different if the paper width is the same
as shown in the below combinations. The staple capacity is 30 sheets.
A3 and A4
B4 and B5
•11
× 17" and 11 × 8 1/2"
•8
1/2 × 14" and
8
1/2 × 11"
1
Select Sort: On Mode on the operation panel of the machine.
English
DF-710, MT-710, BF-710, PH-5A, PH-5B AND PH-5C OPERATION GUIDE 11
2
Select the staple setting required.
NOTE: Refer to the Operation Guide for the machine for more detailed information.
3
Load the originals in the Document Processor, or
one at a time on the Platen.
NOTE: Refer to the Operation Guide for the
machine for Document Processor and Platen
specifications.
4
Select other features as required and press Start.
Cassette Paper
Load Direction
Cassette Paper
Load Direction
Original Orientation:
Top Edge
Original Orientation:
Top Edge
Original Orientation:
Left Top Edge
Original Orientation:
Left Top Edge
English
12 DF-710, MT-710, BF-710, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
5
Copies will be stapled and ejected onto Tray A,
face down.
If Tray A reaches its maximum capacity, a
message displays. Remove all copies from Tray A
to continue.
NOTE: The maximum number of copies that
can be stored on Tray A differs depending on
the size of copy paper being used. For further
information refer to page 36.
6
On completion of the job, remove the copies.
Booklet Stitching Mode
In this mode, copies are stapled in two positions in
the center of the paper.
The following paper sizes can be used in Booklet
Stitching mode:
A3, B4, A4R, 11
× 17", 8 1/2 × 14" and
8
1/2 × 11"
Stapling Capacity: 2 to 16 sheets at a time.
NOTE: The optional Center-Folding Unit is required for automatic folding. Only the
folding tray is used for Booklet Stitching mode.
Booklet Feature (Sheet originals): Delivers
booklet of two-sided copies with facing pages
from one-sided or two-sided originals. Booklets
such as magazines can be created by folding at
the center.
Booklet Feature (Facing originals): Copies
book originals to booklets consisting of two-sided
copies with facing pages. Booklets such as
magazines can be created by folding at the
center.
1
Select the Booklet Stitching mode on the operation panel of the machine.
NOTE: Refer to the Operation Guide for the machine for more detailed information.
2
Load the originals in the Document Processor, or
one at a time on the Platen.
NOTE: Refer to the Operation Guide for the
machine for Document Processor and Platen
specifications.
English
DF-710, MT-710, BF-710, PH-5A, PH-5B AND PH-5C OPERATION GUIDE 13
A maximum of 16 sheets can be bound in a single operation. Up to 64 original sheets can
be loaded at one time.
3
Select other features as required and press Start.
4
Copies will be automatically stapled and ejected
onto the folding tray.
If the maximum capacity is reached, a message
displays. Remove all copies from the folding tray
to continue.
NOTE: For further information refer to
Center-Folding Unit (option) on page 37.
5
On completion of the job, remove the copies from the folding tray.
Hole Punch Mode
This mode produces hole punched copies
automatically.
Hole Punch mode can be used with Sort: ON,
Staple and Sort: OFF modes.
The following paper sizes can be used:
Inch models
2-hole punch: 8
1/2 × 14", 8 1/2 × 13 1/2",
8
1/2 × 13", 8 1/2 × 11", 5 1/2 × 8 1/2", A3, B4, A4, A4R, B5, B5R, A5R and Folio
3-hole punch: 11
× 17", 11 × 8 1/2", A3 and A4
Metric models
2-hole punch: A3, B4, A4, A4R, B5, B5R, A5R, Folio, 8
1/2 × 14", 8 1/2 × 13 1/2",
8
1/2 × 13", 11 × 8 1/2", 8 1/2 × 11" and 5 1/2 × 8 1/2"
4-hole punch: A3, A4, 11
× 17" and 11 × 8 1/2"
Paper weights must be between 45 g/m
2
and 200 g/m
2
.
NOTE: Punching requires the optional punching unit. Tray C cannot be specified as the
output destination for punch mode.
1
Select Hole Punch mode on the operation panel of the machine.
NOTE: Refer to the Operation Guide for the machine for more detailed information.
English
14 DF-710, MT-710, BF-710, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
2
Load the originals in the Document Processor, or
one at a time on the Platen.
Ensure the orientation of the originals is the same
as that selected for Hole Punch mode on the
machine.
NOTE: Refer to the Operation Guide for the
machine for Document Processor and Platen
specifications.
3
Select other features as required and press Start.
4
The copies are automatically hole punched and
ejected onto the selected tray.
NOTE: Holes are punched in each copy
individually, therefore the location of the
holes may vary on each sheet.
On completion of the job, remove all the copies.
Interrupt Mode
1
Specify the settings for interrupt mode at from the machine operation panel.
NOTE: For more information on interrupt mode operation, see the machine operation
guide. Specify the output tray at the machine.
2
Take out the any existing original and set the original to use for interrupt mode.
3
Set desired copier functions or output tray destination and press Start. Copying begins and
paper is output to the selected tray.
When done copying in interrupt mode, turn off interrupt copy mode from the machine itself.
4
Replace the original and press Start. Copying of the interrupted job resumes.
English
DF-710, MT-710, BF-710, PH-5A, PH-5B AND PH-5C OPERATION GUIDE 15
Mailbox Mode
Paper printed at the machine can be output to the
optional mailbox. This feature is useful when
sharing the printer among multiple computers to
output paper to specific trays for each user.
The following paper sizes can be used:
A3, B4, A4, A4R, B5, B5R, A5R, Folio, 11
× 17",
8
1/2 × 14", 8 1/2 × 13 1/2", 8 1/2 × 13", 11 × 8 1/2",
8
1/2 × 11", 5 1/2 × 8 1/2", 8K, 16K and 16KR
NOTE: The maximum number of copies that can be stored in each tray will differ
depending on the size of copy paper being used. For further information refer to page 37.
Preparation for Usage
Write the name of the user of each tray on the
labels provided and attach the labels to the side of
each tray.
NOTE: Attach the labels in the location
indicated on the illustration. The bins to
which labels should be applied are 1, 2, 3, 4,
5, 6, 7 as counted from the top down.
Configuring Mailbox Output <from Computer>
1
Use the printer driver on your computer to select a mailbox tray (mailbox) between 1 and 7.
2
Select the paper size, page(s) to be printed and number of prints required.
3
Print the job. Prints will be ejected onto the
selected tray (mailbox).
4
On completion of the job, remove all prints from the tray (mailbox).
Configuring Mailbox Output <from Machine>
To use the machine to select the tray required, refer to the Operation Guide for the
machine. On the full color machine, the output tray can be specified with the copy and fax
functions. On the monochrome machine, the output tray can be specified with the copy,
fax, and printer functions.
English
16 DF-710, MT-710, BF-710, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
Maintenance
Replacing Staples
The finisher contains staple cartridge holder A.
The optional folding unit contains staple cartridge holders B and C. The refill procedure for
staple cartridge holders B and C are the same as for staple cartridge holder A.
If a message displays indicating that staples have run out, the staple cartridge holder need
to be replenished with staples.
NOTE: If the Staple Unit runs out of staples, contact your service representative or the
place of purchase.
Refilling Staple Cartridge Holder A
Follow the steps below to refill staples.
NOTE: See page 17 to refill staple cartridge holder B/C of the optional folding unit.
1
While pushing the finisher release lever, pull the
finisher out from the machine.
2
Open the right cover (D8).
3
Remove the staple cartridge holder.
English
DF-710, MT-710, BF-710, PH-5A, PH-5B AND PH-5C OPERATION GUIDE 17
4
Remove the empty staple cartridge from the
staple cartridge holder.
NOTE: The staple cartridge can only be
removed when it contains no more staples.
5
Insert the new staple cartridge into the staple
cartridge holder.
6
Re-install the staple cartridge holder. The staple
cartridge holder will click into place when it has
been inserted correctly.
7
Close the right cover (D8) and re-install the finisher back into position on the machine.
Refilling Staple Cartridge Holders B/C (Option)
Follow the steps below to refill staples for the optional folding unit. Follow the same
procedure to refill staple cartridge holders B and C.
1
Push the folding unit release lever and pull out the
folding unit.
2
Remove staple cartridge holder B or C.
English
18 DF-710, MT-710, BF-710, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
3
Open the stopper and remove the empty staple
cartridge.
NOTE: The staple cartridge can only be
removed when it contains no more staples.
4
Insert the new staple cartridge into the staple
cartridge holder and close the stopper.
5
Re-install the staple cartridge holder.
When re-installing, align the triangle marks on the
staple cartridge holder and the staple unit. The
staple cartridge holder will click into place when it
has been inserted correctly.
6
Push the folding unit back into position.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224

KYOCERA CS-4050 Manuale del proprietario

Tipo
Manuale del proprietario