Polycom 1725-40120-001 Manuale utente

Marca: Polycom

Modello: 1725-40120-001

Tipo: Manuale utente

Questo manuale è adatto anche per

Polycom

SoundStation

IP 7000 Conference Phone

Connected to a Polycom

HDX

System or Polycom

RealPresence

Group System in Unsupported VoIP

Environments

November, 2012 | 1725-40120-001 Rev.E

USER GUIDE

User Guide for the Polycom® SoundStation® IP 7000 Phone Connected to a Polycom® HDX® System or

Polycom® RealPresence® Group System in Unsupported VoIP Environments

6001 America Center Dr

San Jose, CA 95164

USA

No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for

any purpose, without the express written permission of Polycom, Inc. Under the law, reproducing includes translating

into another language or format.

As between the parties, Polycom, Inc., retains title to and ownership of all proprietary rights with respect to the software

contained within its products. The software is protected by United States copyright laws and international treaty

provision. Therefore, you must treat the software like any other copyrighted material (e.g., a book or sound recording).

Every effort has been made to ensure that the information in this manual is accurate. Polycom, Inc., is not responsible

for printing or clerical errors. Information in this document is subject to change without notice.

Trademarks

POLYCOM®, the Polycom logo and the names and marks associated with Polycom products are trademarks and/or

service marks of Polycom, Inc. and are registered and/or common law marks in the United States and various other

countries. All other trademarks are property of their respective owners. No portion hereof may be reproduced or

transmitted in any form or by any means, for any purpose other than the recipient's personal use, without the express

written permission of Polycom.

Disclaimer

While Polycom uses reasonable efforts to include accurate and up-to-date information in this document, Polycom

makes no warranties or representations as to its accuracy. Polycom assumes no liability or responsibility for any

typographical or other errors or omissions in the content of this document.

Limitation of Liability

Polycom and/or its respective suppliers make no representations about the suitability of the information contained in this

document for any purpose. Information is provided “as is” without warranty of any kind and is subject to change without

notice. The entire risk arising out of its use remains with the recipient. In no event shall Polycom and/or its respective

suppliers be liable for any direct, consequential, incidental, special, punitive or other damages whatsoever (including

without limitation, damages for loss of business profits, business interruption, or loss of business information), even if

Polycom has been advised of the possibility of such damages.

Customer Feedback

We are striving to improve our documentation quality and we appreciate your feedback. Email your opinions and

comments to VoiceDocumentationFeedb[email protected].

Visit the Polycom Voice Support Center for software downloads, product documents, product licenses, troubleshooting

tips, service requests, and more.

iii

About This Guide

This guide explains how to use your Polycom

SoundStation

IP 7000

conference phone when it is connected to a Polycom

HDX

system or

Polycom

RealPresence

Group system in an unsupported VoIP environment.

In this environment, you can use your phone to manage both audio-only and

video calls, as well as conference calls that have a combination of audio-only

and video calls.

You can connect your phone to the following Polycom HDX systems:

• Polycom

HDX

4000 series

• Polycom

HDX

6000 HD

• Polycom

HDX

7000 series

• Polycom

HDX

8000 HD

• Polycom

HDX

9000 series

You can connect your phone to the following Polycom RealPresence Group

systems:

• Polycom

RealPresence

Group 300

• Polycom

RealPresence

Group 500

r information on how to set up your phone and a Polycom HDX system or

Polycom RealPresence Group system in an unsupported VoIP environment,

including information on software compatibility, see the Integration Guide for

the Polycom SoundStation IP 7000 Phone Connected to a Polycom HDX System or

Note

An unsupported VoIP environment is a call platform that has not been tested with

the SoundStation IP 7000 phone, and therefore is not supported. For a current list

of supported call platforms, go to

http://www.polycom.com/products/voice/conferencing_solutions/ssip_interoperabilit

y_partner_platforms.html

User Guide for the Polycom SoundStation IP 7000 Conference Phone Connected to a Polycom HDX System or Polycom RealPresence Group

System in Unsupported VoIP Environments

Polycom RealPresence Group System in Unsupported VoIP Environments, available

from the SoundStation IP 7000 Video Integration with HDX Series and

RealPresence Group Series Support page.

Contents

About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii

Using Your Phone with a

Polycom HDX System or Polycom RealPresence

Group System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Using the Keys and Soft Keys on Your Phone . . . . . . . . . . . . . . . . . . . . . . . . 2

Using Soft Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Using Scroll Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Using the Select Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Placing Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Placing Calls When You Don’t Have Any Calls . . . . . . . . . . . . . . . . . . . 4

Placing Calls When You Already Have a Call . . . . . . . . . . . . . . . . . . . . . 5

Placing Calls Using Call Lists, the Local Contact Directory,

Speed Dial Index Numbers, and the Redial Key . . . . . . . . . . . . . . . . . . . 5

Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Ending Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Rejecting Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Hosting Conference Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Setting Up Conference Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Handling Conferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Managing Conferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Understanding Microphone and Speaker Behavior . . . . . . . . . . . . . . . . . . . 11

Controlling Volume and Muting Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Showing Content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Handling Computer or Mobile Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Listening to Computer or Mobile Audio . . . . . . . . . . . . . . . . . . . . . . . . 14

Safety Notices . . . . . . . . . . . . . . . . . . . . . . . . Safety Notices–1

End-User License Agreement for Polycom® Software

User Guide for the Polycom SoundStation IP 7000 Conference Phone Connected to a Polycom HDX System or Polycom RealPresence Group

System in Unsupported VoIP Environments

Using Your Phone with a

Polycom HDX System or Polycom

RealPresence Group System

When your SoundStation IP 7000 conference phone is connected to a

Polycom HDX system or Polycom RealPresence Group system in an

unsupported VoIP environment, you can manage both audio-only calls and

video calls from your phone. You can also manage conference calls that can be

a combination of audio-only (including audio from mobile devices and

computer calling applications) and video calls. In an unsupported VoIP

environment, you cannot place calls on hold, forward calls, or transfer calls.

This guide describes how to use your phone when it is connected to a

Polycom HDX system or Polycom RealPresence Group system in an

unsupported VoIP environment, and how to use the keys and soft keys on

your phone to perform basic phone functions.

The topics include:

• Using the Keys and Soft Keys on Your Phone on page 2

• Placing Calls on page 3

• Answering Calls on page 7

• Ending Calls on page 8

• Rejecting Calls on page 8

• Hosting Conference Calls on page 8

• Understanding Microphone and Speaker Behavior on page 11

• Controlling Volume and Muting Calls on page 12

• Showing Content on page 13

• Handling Computer or Mobile Audio on page 13

User Guide for the Polycom SoundStation IP 7000 Conference Phone Connected to a Polycom HDX System or Polycom RealPresence Group

System in Unsupported VoIP Environments

Using the Keys and Soft Keys on Your Phone

For many phone functions, you need to press a soft key, scroll key, or the

Select key.

The following figure shows the location of the soft keys, scroll keys, and the

Select key on your phone console.

Using Soft Keys

Your phone has four soft keys. Press a soft key, , to access a function that

displays directly above the soft key.

Note

You can perform many of the above phone functions using the Polycom HDX or

Polycom RealPresence Group system’s remote control, Polycom Touch Control, or

keypad. For detailed information on how to use the remote control, Polycom Touch

Control, or keypad, see the user guide for your system, which is available by

navigating from the Video Support page.

Using Your Phone with a Polycom HDX System or Polycom RealPresence Group System

Using Scroll Keys

Your phone has four scroll keys:

• Up scroll key, —Press this key to scroll through lists and to view

speed dial information.

• Right scroll key, —Press this key to view the Placed Calls list.

• Down scroll key, —Press this key to scroll through lists and to

view the Missed Calls list.

• Left scroll key, —Press this key to view the Received Calls list.

Using the Select Key

To select an item in a list, scroll to the item, and then press the Select key, .

Placing Calls

This section explains how to place calls in the following ways:

• Placing Calls When You Don’t Have Any Calls

• Placing Calls When You Already Have a Call

• Placing Calls Using Call Lists, the Local Contact Directory, Speed Dial

Index Numbers, and the Redial Key

User Guide for the Polycom SoundStation IP 7000 Conference Phone Connected to a Polycom HDX System or Polycom RealPresence Group

System in Unsupported VoIP Environments

Placing Calls When You Don’t Have Any Calls

When you place a call, you must specify if the call will be an audio-only call or

a video call.

To place a call when you don’t have any calls:

1. Do one of the following:

— Press .

The message “Video or Phone Call?” displays. To place a video call,

press the Video soft key. To place an audio-only call, press the Phone

soft key.

— To place a video call, press the Video soft key. To place an audio-only

call, press the Phone soft key.

— Enter the phone number of the site you want to call. Then, press the

Phone soft key (to place an audio-only call) or the Video soft key (to

place a video call). The call is placed.

2. Do one of the following:

— To enter a phone number, enter the number of the site you want to call.

— To enter an IP address or URL (for video calls only):

Toggle the ABC and 123 soft keys to enter the URL or IP address of the

site you want to call.

You can switch between entering a number or IP address, or a URL,

by pressing the 123 and ABC soft keys.

To enter the letters that display on a number key, press the number

key one or more times.

For example, to enter “a,” press once. To enter “c,” press

three times quickly.

To enter “.” and “@”, press one or more times quickly.

3. Press or the Dial soft key.

Note

Placing a call using an IP address or URL may not be enabled for your phone. For

more information, see your system administrator.

Using Your Phone with a Polycom HDX System or Polycom RealPresence Group System

The following figure shows a video call to 1955.

The following figure shows an audio-only call to 1955.

Placing Calls When You Already Have a Call

If you place a call when you already have a call, you automatically create a

conference between yourself, the existing call, and the new site you call. For

more information, see the instructions for setting up a conference using the

Add Phone or Add Video soft keys under Setting Up Conference Calls

on page 9.

Placing Calls Using Call Lists, the Local Contact Directory, Speed Dial Index

Numbers, and the Redial Key

Note

The number of audio-only and video calls you can include in a conference call

depends on how your Polycom HDX or Polycom RealPresence Group system is set

up. The maximum number of audio-only and video calls in any combination can not

exceed the maximum number of calls supported on your Polycom HDX or Polycom

RealPresence Group system.

Note

The directories on your phone and on the Polycom HDX or Polycom RealPresence

Group system are not integrated. Directory entries on the phone do not display on

the Polycom HDX or Polycom RealPresence Group system, and directory entries

on the Polycom HDX or Polycom RealPresence Group system do not display on

the phone.

User Guide for the Polycom SoundStation IP 7000 Conference Phone Connected to a Polycom HDX System or Polycom RealPresence Group

System in Unsupported VoIP Environments

Instead of entering phone numbers, URLs, and IP addresses from memory,

you can access call lists, your local Contact Directory, and speed dial lists to

place audio-only and video calls. You can also redial numbers.

For detailed information on using the local Contact Directory and the

Redial key, see the User Guide for the Polycom SoundStation IP 7000 Phone,

available from the SoundStation IP 7000 Support page.

Calling from a Call List

You can choose a number from a received, placed, or missed calls list. To dial

a recently-dialed number, choose a number from the placed calls list.

The following figure shows a Placed Calls list.

To place a call from a call list:

1. Do one of the following:

— To access the Received Calls list, press .

— To access the Placed Calls list, press .

— To access the Missed Calls list, press .

2. Scroll to the call you want to dial.

3. Press or the Dial soft key.

Note

Depending on the Polycom HDX system or Polycom RealPresence Group system

you have, caller information for certain audio-only calls may not display in the

Received and Missed Calls lists. Therefore, you may not be able to dial certain calls

from these lists.

Using Your Phone with a Polycom HDX System or Polycom RealPresence Group System

Calling from the Local Contact Directory

The local Contact Directory is a list of local contacts that you can manage and

update.

To place a call from the local Contact Directory:

1. Press the Dir soft key, and then select Contact Directory.

2. Scroll to the contact you want to dial.

3. Press or the Dial soft key.

Calling from the Speed Dial List

A speed dial list is a list of contacts associated with a speed dial number. You

can use the speed dial list to quickly dial a contact.

To place a call using the speed dial list:

1. Press .

2. From the Speed Dial Info screen, scroll to the site you want to call.

3. Press or the Dial soft key.

Calling Using the Redial Key

You can redial the last number you dialed.

To place a call using the Redial key:

Press .

Answering Calls

You can answer an incoming call when you are already in a call, or when you

don’t have a current call. If you answer a call when you already have a call, a

conference is automatically created between yourself, the existing call, and the

call you answer.

Note

The number of audio-only and video calls you can include in a conference call

depends on how your Polycom HDX or Polycom RealPresence Group system is set

up. The maximum number of audio-only and video calls in any combination can not

exceed the maximum number of calls supported on your Polycom HDX or Polycom

RealPresence Group system.

User Guide for the Polycom SoundStation IP 7000 Conference Phone Connected to a Polycom HDX System or Polycom RealPresence Group

System in Unsupported VoIP Environments

To answer an incoming call:

Press the Answer soft key. (If you already have a call, press the Down

scroll key to select the new call, and then press the Answer soft key.)

If you were already in a call, a conference is automatically created between

yourself, the existing call, and the call you answer.

Ending Calls

To end a call:

Press or the End Call soft key.

To end a conference call, or remove a conference call participant, see

Handling Conferences on page 10 and Managing Conferences on page 10.

Rejecting Calls

You can ignore an incoming audio-only or video call.

To ignore an incoming call:

Press the Reject soft key. (If you already have a call, press the Down scroll

key to select the incoming call, and then press the Reject soft key.)

Hosting Conference Calls

When you use your phone to create a locally-hosted conference call, you can

include one or more audio-only calls and one or more video calls. The number

of audio-only and video calls you can include depends on how your system is

set up. To find out the exact number, see your system administrator.

Note

For information on how to use your Polycom HDX system or

Polycom RealPresence Group system to include multiple sites in calls, see the user

guide for your system, which is available by navigating from the Video Support

page.

Using Your Phone with a Polycom HDX System or Polycom RealPresence Group System

The following figure shows a video conference. The video icon, ,

displays when at least one conference call participant connects by video.

Setting Up Conference Calls

To set up a conference, use the Add Phone or Add Video soft keys.

To set up a conference using the Add Phone or Add Video soft keys:

1. Call the first site. See Placing Calls on page 3.

The following figure shows a video call to Jacklyn Smith.

2. Place a call to the second site:

a To place a video call, press the Add Video soft key. To place an

audio-only call, press the Add Phone soft key.

b Call the second site. See Placing Calls on page 3.

The call is placed, and a conference is automatically created.

To continue to add video calls to a conference, press the Add Video soft key

from the Active:Conference screen, and then place a call to the site you want

to add to the conference. When the site answers, the people automatically join

the conference.

Note

For certain audio-only calls, a conference is not automatically created. To create a

conference, press the Add Phone soft key again.

User Guide for the Polycom SoundStation IP 7000 Conference Phone Connected to a Polycom HDX System or Polycom RealPresence Group

System in Unsupported VoIP Environments

To continue to add audio-only calls to a conference, press the Add Phone

soft key from the Active:Conference screen, and then place a call to the site you

want to add to the conference. When the site answers, the people

automatically join the conference.

Handling Conferences

During a conference, the Add Phone and Add Video soft keys display so you

can add additional sites to the conference. From the Active:Conference screen,

you can also end the conference.

To end the conference:

From the Active:Conference screen, press or the End Call soft key.

The message “End Entire Conference?” displays. Do one of the following:

— To end all calls (including the connection between all participants),

press or the Yes soft key.

— If you don’t want to end all calls, but just remove a conference call

participant, press the No soft key. The Manage Conference screen

displays. To remove a conference call participant using the Manage

Conference screen, see Managing Conferences, below.

— To return to the Active:Conference screen, press the Cancel soft key.

Managing Conferences

The Manage soft key is available during conference calls. From the

Manage Conference screen, you can scroll to a conference call participant and

then remove the participant, or view information about the participant.

To manage a conference:

From the Active:Conference screen, press the Manage soft key.

You can access the following soft keys from the Manage Conference screen:

•Info—Provides additional information about the selected participant.

• Back—Returns you to the Active:Conference screen.

Note

For certain audio-only calls, the site will not automatically join the conference. To

join the people in the conference, press the Add Phone soft key again.

Note

You cannot manage certain audio-only conferences.

Using Your Phone with a Polycom HDX System or Polycom RealPresence Group System

•End Call—Removes the selected conference call participant.

•Content—Shows content to near-site and far-site video participants. (For

more information on showing content, see Showing Content on page 13.)

To remove a conference call participant:

From the Manage Conference screen, scroll to the participant you want to

remove, and then press or the End Call soft key.

Understanding Microphone and Speaker Behavior

When your phone is connected to a Polycom HDX system or

Polycom RealPresence Group system, your setup may include additional

microphones other than your phone’s internal microphones. These

microphones can include:

• Analog expansion microphones connected to your phone.

• Microphone Arrays connected to your Polycom HDX system or

Polycom RealPresence Group system.

• Analog microphones connected to your Polycom HDX system or Polycom

RealPresence Group system.

When you have a call—either audio-only or video—all microphones

connected to the phone and Polycom HDX system or Polycom RealPresence

Group system are used.

Even though your setup uses all microphones during a call, not all speakers

are used. Depending on the call, either your phone’s speaker is used, or the

Polycom HDX or Polycom RealPresence Group system’s speakers are used.

Speakers are used in the following ways:

• Video-only calls use the Polycom HDX or Polycom RealPresence Group

system’s speakers only.

• Audio-only calls use the SoundStation IP 7000 speaker only.

• Adding video to an audio-only call switches from the phone’s speaker to

the Polycom HDX or Polycom RealPresence Group system’s speakers as

soon as the video call connects.

• Adding audio to a video call continues to use the Polycom HDX or

Polycom RealPresence Group system’s speakers. The Polycom HDX or

Polycom RealPresence Group system speakers are used as long as there is

one video participant.

User Guide for the Polycom SoundStation IP 7000 Conference Phone Connected to a Polycom HDX System or Polycom RealPresence Group

System in Unsupported VoIP Environments

Controlling Volume and Muting Calls

You use your phone’s volume and Mute buttons to mute and adjust the

volume of both audio-only and video calls.

To adjust the speaker volume:

During a call, press either or .

To mute the microphone:

During a call, press on the phone console.

The LEDs glow red, and the mute icon, , displays on the phone screen.

A mute icon also displays on the Polycom HDX or Polycom RealPresence

Group system screen. The other person (or people) cannot hear you. You can

still hear all other people while Mute is enabled.

To turn off the Mute feature, press (on the phone console) again.

To mute the microphone if you use an expansion microphone or Polycom

Microphone Array:

Press on the phone console or the button on the top of the

expansion microphone or Polycom Microphone Array.

To turn off the Mute feature, press or again.

Note

When you press the Mute key on the phone, or on any expansion microphone or

Polycom Microphone Array, you mute the microphone on the phone and all

expansion microphones and Polycom Microphone Arrays connected to your phone

and to the Polycom HDX system or Polycom RealPresence Group system. (You will

not mute audio from other sources, such as a computer, VCR, or DVD player.)

You can also control the volume and mute microphones (including your phone’s

microphones) using the Polycom HDX or Polycom RealPresence Group system’s

remote control or Polycom

Touch Control. For more information, see the user

guide for your system, which is available by navigating from the Video Support

page.

Using Your Phone with a Polycom HDX System or Polycom RealPresence Group System

Showing Content

A Content soft key displays on your phone so that you can show content to

near-site participants, as well as to near-site and far-site video participants

during a video call or conference. The Content soft key displays when your

phone is idle, or when you have a call.

Depending on the Polycom HDX system or Polycom RealPresence Group

system you have, you may be able to show the following:

• Information stored on a computer

• A paper document or object placed on a document camera

• A videotape or DVD

For information on how to connect a computer, document camera, VCR, or

DVD player to a Polycom HDX system or Polycom RealPresence Group

system so you can show content, see your system administrator.

For detailed information on how to show content, see the user guide for your

system, which is available by navigating from the Video Support page.

To start and stop showing content:

Press the Content soft key.

Handling Computer or Mobile Audio

Your conference phone has a 2.5mm audio connector to connect to a mobile

device or to a computer calling application. You connect a mobile device or

computer calling application so you can use the conference phone speaker to

stream two-way audio from the mobile device or computer calling application

for hands-free conversations. When you connect mobile or computer audio to

your conference phone, all participants in a call or conference call (including

those connected through a mobile device or computer calling application) can

hear and speak to each other.

You connect your phone to a computer or mobile audio source using the

Computer Calling Cable or Mobile Device Cable. For information on

connecting these cables to your phone, see the Integration Guide for the Polycom

SoundStation IP 7000 Conference Phone Connected to a Polycom HDX System or

Polycom RealPresence Group System in Unsupported VoIP Environments, available

from the SoundStation IP 7000 Video Integration with HDX Series and

RealPresence Group Series Support page.

User Guide for the Polycom SoundStation IP 7000 Conference Phone Connected to a Polycom HDX System or Polycom RealPresence Group

System in Unsupported VoIP Environments

Your phone handles computer or mobile audio just like an audio-only call,

except:

• All computer or mobile audio displays on your phone screen as

From: PC-Mobile audio.

• You do not use or the Answer soft key to listen to computer or

mobile audio. For information on how to listen to computer or mobile

audio, see Listening to Computer or Mobile Audio, below.

Listening to Computer or Mobile Audio

You can connect the computer or mobile audio source while your conference

phone is in an idle state, or when you already have a call.

If you connect a computer or mobile audio source to your conference phone

when your conference phone is idle, you immediately hear any audio

associated with the mobile device or computer calling application.

To listen to computer or mobile audio when you already have a call:

Connect the computer calling application or mobile device to the

conference phone.

A conference is automatically created between yourself, the existing call, and

the computer or mobile audio source.

To remove a computer or mobile audio source, disconnect the

Computer Calling Cable or Mobile Device Cable from the conference phone. If

you want to keep the connection for future computer or mobile audio calls,

end the call from your computer or mobile device, but do not remove the

Computer Calling Cable or Mobile Device Cable. Your conference phone will

always display an audio source (From:PC-Mobile audio) if either cable is

connected to your phone.

Note

Your conference phone always displays an audio source (From:PC-Mobile audio) if

either the Computer Calling Cable or Mobile Device Cable is connected to your

conference phone.

Audio from computer calling applications or mobile devices does not display in your

conference phone Call Lists.

La pagina si sta caricando...

Polycom 1725-40120-001 Manuale utente

Marca: Polycom

Modello: 1725-40120-001

Tipo: Manuale utente

Questo manuale è adatto anche per

Scarica PDF

rapporto

in altre lingue

English: Polycom 1725-40120-001 User manual

Polycom 1725-40120-001 Manuale utente

Questo manuale è adatto anche per

Polycom 1725-40120-001 Manuale utente

in altre lingue

Documenti correlati

Altri documenti