Motorola D810 series Manuale utente

Motorola D810 series

Digital Cordless Phone with

Answering Machine

Warning

Use only rechargeable batteries.

Charge the handset for 24 hours before use.

Téléphone numérique sans

fil avec répondeur

Avertissement

Utilisez exclusivement des piles rechargeables.

Laissez le téléphone en charge pendant 24 heures avant une première utilisation

Digitales Schnurlos-Telefon

mit Anrufbeantworter

Warnung

Verwenden Sie nur wiederaufladbare Batterien.

Laden Sie das Mobilteil mindestens 24 Stunden vor der Verwendung.

Telefono Cordless Digitale

con Segreteria Telefonica

Avvertenza

Servirsi unicamente di batterie ricaricabili.

Caricare il portatile per 24 ore prima dell’uso.

Teléfono inalámbrico digital

con contestador

Aviso

Utilice únicamente baterías recargables.

Cargue el terminal durante 24 horas

antes de su uso.

EN

FR

DE

IT

ES

cover_front.fm Page 0 Friday, September 7, 2007 7:36 PM

2

EN

• Wall mountable freedom base – all handsets fully cordless for

locating anywhere within range.

• 1.4” colour display.

• 250 Name and number phonebook.

• Copy phonebook entries between other handsets or your

mobile phone SIM card.

• Screensaver clock display.

• Answering machine with 12 minutes digital recording time.

• Send and receive text messages.

1

• Caller Display shows you who’s calling and see details of the

last 30 callers in a Calls list.

2

• Register up to 5 handsets to a single base and register each

handset with up to 4 different bases.

• Make internal calls, transfer external calls, hold 3-way conver-

sation between two internal callers and an external caller.

1.

You must subscribe to your network provider’s Caller Display

Service for text messaging to work and you must not withhold

your telephone number. A quarterly fee may be payable.

Some other network provider lines may not be compatible

with this text messaging service.

2.

You must subscribe to your network provider’s Caller Display

or Call Waiting service for these features to work. A quarterly

fee may be payable.

Please note that this equipment is not designed for making

emergency telephone calls when the power fails. Alternative

arrangements should be made for access to emergency.

Alternatively, you may find the answer in the ‘Help’ section at

the back of this guide.

Welcome...

to your new Motorola D811 Digital Cordless Phone!

This User Guide provides you with all the information

you need to get the most from your phone.

Before you make your first call you will need to set up your phone.

Follow the simple instructions in ‘Getting Started’, on the next few pages.

IMPORTANT

Only use the telephone line cord supplied.

This equipment is not designed for making emergency telephone

calls when the power fails. Alternative arrangements should be

made for access to emergency services.

Got everything?

• D811 handset & charger

• D811 base

• Quick start guide

• 2 x AAA NiMH rechargeable batteries

• Mains power adaptor for the base

• Mains power adaptor for the charger

• Telephone line cord

• Wall mounting screws and wall plugs

If you have purchased a D811 multiple pack you will also

have the following additional items:

• D811 handset & charger

• 2 x AAA NiMH rechargeable batteries

Mains power adaptor for the charger

EN

D811_IFU_EN.fm Page 2 Friday, September 7, 2007 7:37 PM

3

1. Getting started 4

Location 4

Setting up 4

Connecting up the large base 4

Connecting the handset and charger 4

Setting up your D811 4

Set date and time manually 5

2. Getting to know your phone 5

Overview of your handset 5

Handset Display 5

Display icons 6

Overview of the base 6

Navigating the menus 6

Menu map 7

Character map 8

3. Using the phone 8

Switch the handset on / off 8

Make a call 8

Preparatory dialling 8

End a call 8

Receive a call 8

Adjust the earpiece/receiver volume 8

Secrecy 8

Call another handset 8

Transfer a call 8

3-way conference call 8

Make a handsfree call 9

Answer a call in handsfree 9

Redial a number from the redial lists 9

Save a number from the redial list to the phonebook 9

Delete a redial number/delete all redial 9

To lock the keypad 9

Paging/Find handset 9

Store a name and number 9

View an entry 9

Dial an entry 9

Edit a name and number 9

Edit ringtone 10

Delete an entry 10

Delete entire phonebook 10

Copy an entry to another handset 10

Copy the entire phonebook to another handset 10

Memory status 10

Copy an entry to a SIM card 10

Copy all entries to or from a SIM card 10

Change the dialling code 10

4. Handset settings 11

Handset ringtone 11

Handset ringer volume 11

Receiver volume 11

Handset name 11

Display language 11

Wallpaper 11

Menu colour 11

Screensaver 11

Light timeout 11

Display contrast 11

Auto talk 11

Key beep 11

PABX access code 12

5. Base settings 12

Base ringtone 12

Base ringer volume 12

Dialling mode 12

Ring priority 12

Recall mode 12

First ring 12

System PIN 12

Restore default settings 13

ECO mode 13

6. Clock & alarm 13

Date & time 13

Set alarm 13

Alarm on /off 13

Switch off alarm ring 13

Time format 13

7. Agenda 14

Add a new event 14

Switch off agenda ring 14

Show agenda details 14

Edit agenda 14

Send agenda as a text message 14

Delete agenda 14

Delete all agendas 14

8. Calls lists 14

Caller Display 14

Calls lists 14

New calls alert 14

View new missed calls 14

View and dial from a Calls list 15

Copy a Calls list number to the phonebook 15

Send a text message to a Calls list number 15

Delete an entry 15

Delete all entries 15

9. Call Waiting 15

10. Voicemail 15

11. Answering machine 16

Base control keys 16

Switch the answering machine on / off 16

Answer delay 16

Switch message alert tone on / off 16

On-screen alert 16

Record your own outgoing message 16

Outgoing message language 16

Check or delete your outgoing message 17

Select outgoing message mode 17

Record a memo 17

Call screening 17

Message playback 17

Delete all old messages 17

Switch remote access

On or Off. 17

Change the remote access PIN 17

Switch your answering machine on remotely 18

Play messages 18

12. Text messaging 18

Subscribe to the text messaging service 18

Send a text message 18

Standard text entry 19

Receiving and reading text messages 19

Read a new message 19

Read, forward, delete, view and save numbers of texts

in the Inbox 19

Edit or send texts in the Drafts box 19

Forward or delete texts in the Outbox 19

Edit templates 20

Deleting texts 20

Add or change Service Centre numbers 20

Set send centre 20

Message alert tone 20

Set message size 20

Add a user mailbox 20

Open and read a mailbox text 20

Edit a user mailbox 21

Delete a user mailbox 21

Set common mailbox sub address 21

13. Using additional handsets 21

Registering an additional handset 21

Select a base 21

De-register a handset 22

14. Help 22

15. General information 23

Safety information 23

Cleaning 23

Environmental 23

Product disposal instructions 23

Warranty Information 23

Declaration of Conformance 24

Inserting a pause 24

Recall 24

16. Wall mounting 24

EN

D811_IFU_EN.fm Page 3 Friday, September 7, 2007 7:37 PM

4 Getting started

1. Getting started

WARNING

Do not place your D811 in the bathroom or other humid areas.

Location

You need to place your D811 base within 2 metres of the mains

power socket and telephone socket so that the cables will

reach.

Make sure it is at least 1 metre away from other electrical

appliances to avoid interference. Your D811 works by sending

radio signals between the handset and base. The strength of

the signal depends on where you site the base. Putting it as

high as possible ensures the best signal.

To wall mount your D811 base, see “Wall mounting” on

page 24.

HANDSET RANGE

The D811 has a range of 300 metres outdoors when there is a

clear line of sight between the base and handset. Any

obstruction between the base and handset will reduce the

range significantly. With the base indoors and handset either

indoors or outdoors, the range will normally be up to 50 metres.

Thick stone walls can severely affect the range.

SIGNAL STRENGTH

The icon on your handset indicates when you are in range.

When out of range of the base, the screen shows

Searching…

the

flashes and the handset gives an out-of-range warning

tone every minute. This tone is repeated until you move back

into range.

If you are on a call, the line will hang up. Move back within in

range. The handset will automatically re-connect to the base.

Setting up

IMPORTANT

The base station must be plugged into the mains power at all

times. Do not connect the telephone line cord into the wall

socket until the handset is fully charged. Only use the power

and telephone cables supplied with the product.

WHICH POWER ADAPTOR?

The power adaptor with a clear connector is for the base unit

and the power adaptor with a red colour connector is for the

charger unit.

Connecting up the large base

Plug the large mains power cable into the socket marked

on the underside of the base and plug the other end into the

mains power wall socket and switch the power on.

Connecting the handset and charger

If you have purchased a multiple pack, this process will need to

be carried out for all handsets and chargers:

1.

Plug the small mains power cable into the socket marked

on the underside of the charger.

2.

Insert the 2 x AAA NiMH batteries supplied into the

handset. Then slide the compartment cover into place.

3.

Place the handset on the charger to charge for at least 24

hours. When the handset is fully charged the icon will

indicate that it is fully charged.

4.

After 24 hours, plug the telephone line cord from the large

base into the telephone wall socket.

BATTERY LOW WARNING

If the icon flashes in the display, you will need to recharge

the handset before you can use it again.

During charging, the icon will scroll in the display.

BATTERY PERFORMANCE

In ideal conditions, fully charged batteries should give about 10

hours talk time or 100 hours standby time on a single charge.

Note that new batteries do not reach full capacity until they

have been in normal use for several days.

To keep your batteries in the best condition, leave the handset

off the base for a few hours at a time.

Running the batteries right down at least once a week will help

them last as long as possible.

The charge capacity of rechargeable batteries will reduce with

time as they wear out, giving the handset less talk/standby

time. Eventually they will need to be replaced.

After charging your handset for the first time, subsequent

charging time is about 6–8 hours a day. Batteries and handset

may become warm during charging. This is normal.

Setting up your D811

Welcome screen

1.

The Welcome screen will briefly appear, then a list of

countries is displayed.

2.

Scroll or to your country (operator) and press

Select

.

The handset and base will reset to load the correct settings.

The standby screen is then displayed and your phone is

ready to use

You can still make and receive calls without first selecting your

country and network operator, however the Welcome screen

will re-appear until you have configured your phone country

settings.

Date and time

Providing you have subscribed to your network’s Caller Display

service, the date and time is set automatically for all handsets

when you receive your first call.

The date and time is recorded with each answering machine

D811_IFU_EN.fm Page 4 Friday, September 7, 2007 7:37 PM

Getting to know your phone 5

message you receive.

If you do not have a Caller Display service you can set the date

and time manually.

Set date and time manually

1.

Press

Menu

and scroll or to

Clock & Alarm

then press

Select

.

2.

Date & Time

is highlighted. Press

Select

.

3.

Enter the date using the format DD/MM/YY e.g. 09 06 07

for 9th June 2007. Enter the time in 12 or 24 hour time

format. Press

Save

. To change the Time Format see

page 13.

4.

Press or

Back

until you return to standby.

Your D811 is now ready for use.

2. Getting to know your phone

Overview of your handset

A Earpiece

B Display

See page 6 for an overview of the display icons.

C Option button (left)

Press to open the Menu.

Press to select options displayed on screen.

D Option button (right)

In standby, press to open the phonebook menu, page 9.

Press to select options displayed on screen.

E Redial/ Up

In standby, press to open and scroll through the Redial list,

page 9.

In talk mode, press to adjust volume.

In menu mode, press to scroll through the options.

When storing an entry in the phonebook, press and hold to

enter a Pause, page 24.

F Talk/ Handsfree

In standby mode, press to make and receive calls, page 8.

In talk mode, press to switch handsfree on and off, page 8.

G End call/ Power on/off

Press to end a call, page 8.

In menu mode, press to return to standby.

In standby, press and hold to switch the handset off. When off,

press to switch the handset back on.

H Phonebook/ Down

In standby, press to open and scroll through the Names list,

page 9.

In talk mode, press to adjust volume.

In menu mode, press to scroll through the options.

I*

Press and hold to switch between Tone and Pulse dialling,

page 12

J#/ Lock

Press and hold to lock the keypad, page 9.

To unlock, select

Unlock

and follow the on screen instructions.

KInt(Intercom)

Used for internal calls, page 22.

L R (Recall)

For use with switchboard/PBX.

M Wired Headset Socket

Please use 2 pin headset with 2.5mm connector.

Handset Display

I

J

K

L

M

Handset

name/

number

Range

indicator

Flashes

when out of

range or not

registered

Battery

status

Scrolls when

charging

EN

D811_IFU_EN.fm Page 5 Friday, September 7, 2007 7:37 PM

6 Getting to know your phone

Charger

Display icons

Displayed in standby mode to indicate handset is in

range of the base.

Flashes if you move out of range.

Displayed if ECO Mode is switched on

Handset ringer volume is Off.

Displayed in handsfree talk mode.

Answering machine is On.

An alarm is set.

The keypad is locked.

You have answering machine messages.

You have SMS text messages.*

You have voicemail messages.*

You have missed calls.*

The approximate power levels of your battery are indicated as

below:

Battery is fully charged.

Battery is partially charged.

Battery is running low.

Battery is almost fully discharged (Red).

* For this feature to work you must subscribe to your network

provider’s Caller Display service. A quarterly fee may be

payable.

NOTE

When the memory for TAM, SMS or voicemail messages is full,

a white line will appear below their corresponding reminder

icon.

Overview of the base

A LED Indicator

Indicates when the answering machine is on or off, and how

many messages you have.

B Answering machine On/Off

CDelete

D Skip Backwards/Replay

EPlay/Pause

FSkip Forward

GStop

H Volume Down

I Volume Up

JPaging Key

In standby, press to ring the handset(s), page 9.

Press and hold to enter registration mode when registering

handsets, page 21.

K SIM card slot

Insert your mobile phone SIM card here to copy to and from the

phonebook.

For more information on these control keys, see page 16

Navigating the menus

Your D811 has an easy to use menu system.

Each menu has a list of options, which you can see on the

menu map on the following page.

When the handset is switched on and in standby:

1.

Press

Menu

to open the main menu.

2.

Then use or buttons to scroll through the available

options.

3.

Press the

Select

option button to select a menu option or the

Back

option button to go back to the previous screen.

To return to the previous menu level, press

Back

.

To exit the menu and return to standby, press .

If no buttons are pressed for 30 seconds, the handset returns

to standby automatically.

When answer machine is ON Displays the number of

messages

When memory is full and answer

machine is ON

Alternates between "

F

" and

message number

During Remote Access of the

answer machine

Displays "

A

"

When recording incoming/

outgoing messages and memo

Displays "

r

"

During volume adjustment Displays "

0

" - "

9

" or "

H

" for

highest volume

When answer machine is OFF

with no activity

Displays "

-

"

On startup Flash between "

C

" and

message number if the time

has not been set

D811_IFU_EN.fm Page 6 Friday, September 7, 2007 7:37 PM

Getting to know your phone 7

Menu map

Text

Messaging

Answer

Machine

Calls Lists Agenda Clock & Alarm Settings Registration Names Press Names

during a call:

Write Message

Inbox

Drafts

Outbox

Templates

Delete Messages

Text Settings

Play

Play All

Answer On/Off

Record Memo

Outgoing Message

Delete Messages

Answer Settings

Missed Calls

Received Calls

Dialled Calls

Delete Calls

If there is an Event,

the following

options will be

displayed.

Add Event*

Show Details

Edit Event

Send as a Text

Delete Event

Delete All Events

Date & Time

Alarm

Time Format

Set Handset

Ringtone

Ringer Volume

Receiver Volume

Handset Name

Language

Wallpaper

Menu Colour

Screensaver

Light Timeout

Display Contrast

Auto Talk

Key Beep

PABX Access

Code

Set Base

Ringtone

Ringer Volume

Dialling Mode

Ring Priority

Recall Mode

First Ring

System PIN

Master Reset

ECO Mode

Register Handset

Select Base

De-register

From menu in

standby:

Search

Add Entry

Copy Phonebook

Dialling Codes

Memory Status

Delete Phonebook

Press in

standby:

Phonebook list

is displayed

Select

OPTIONS

:

Show Details

Send Message

Edit Entry

Copy Entry

Ringtone

Delete Entry

Phonebook list

is displayed.

Select

OPTIONS

:

Add Entry

Show Details

Edit Entry

Delete Entry

*If there is already an event on the list, "Event" is displayed.

Otherwise, "Add Event" is displayed.

EN

D811_IFU_EN.fm Page 7 Friday, September 7, 2007 7:37 PM

8 Using the phone

Character map

Key Case Assigned characters and symbols

L/U*

L

U

L

U

L

U

L

U

L

U

L

U

L

U

L

U

L/U

L/U bring up symbol table

L/U short press to switch between Abc, abc, ABC

and 123 mode

long press to switch between input

languages

*L = Lower

U = Upper

3. Using the phone

CALL TIMER

Your handset will automatically time the duration of all external

calls. The handset display shows the call duration both during

and for a few seconds after your call.

Switch the handset on / off

1.

In standby, press and hold to switch the handset off.

When off, press to switch back on.

Make a call

1.

Press .

2.

When you hear the dial tone, dial the number.

If the number dialled matches an entry in the phonebook, the

name is displayed.

Preparatory dialling

1.

Dial the number first. If you make a mistake press

Clear

to

delete the last digit.

2.

Press to dial.

If the number dialled matches an entry in the phonebook, the

name is displayed.

End a call

1.

Press .

Receive a call

When you receive an external call, the phone rings. The display

shows

External Call

and the caller’s number or, if the number

matches an entry stored in the phonebook, the name is

displayed.

1.

Press to answer the call.

Adjust the earpiece/receiver volume

1.

During a call, press or to increase or decrease the

volume. The display shows the level.

Secrecy

During a call, you can talk to someone nearby without your

caller hearing.

1.

During a call, press

Secrecy

. The display shows

Secrecy On

and your caller cannot hear you.

2.

Press

Off

to return to your caller.

Internal calls

Call another handset

If you have more than one handset registered to the base, you

can make internal calls between two handsets.

1.

Press then the number (1-5) of the handset you want to

call.

2.

Press

OK

to dial.

When an internal call is received, the display shows

Internal Call

Handset X

(where X is the calling handset) and the handset

number.

Transfer a call

You can transfer an external call to another handset registered

to the base.

During your call:

1.

Press then the handset number (1-5) you want.

2.

Press

OK

to dial or press

End

to cancel the calls request and

return to the caller.

3.

When the other handset answers you can announce the

caller.

4.

Press to complete the transfer or to switch back and

forth between both callers.

If the other handset does not answer, press

End

to return to your

original caller.

3-way conference call

You can hold a 3-way conference call between 2 internal callers

and 1 external caller.

During a call to an external caller:

1.

Press then the handset number (1-5) you want.

2.

Press

OK

to dial.

3.

When the other handset answers you can announce the

caller.

4.

Press

Join

to begin the conference call. Display shows

Conference Call

.

5.

Press to hang up.

Handsfree

Handsfree lets you talk to your caller without holding the

handset. It also enables other people in the room to listen to

your conversation over the loudspeaker.

D811_IFU_EN.fm Page 8 Friday, September 7, 2007 7:37 PM

Using the phone 9

Make a handsfree call

1.

Dial the number then press .

2.

Press again. The icon is displayed and you hear

your call over the handset loudspeaker.

3.

Press to switch the call between the earpiece and the

loudspeaker.

4.

Press to end the call.

During a handsfree call, press or to change the volume.

Answer a call in handsfree

When the phone rings, press twice to answer in handsfree

talk mode.

Redial

The last 20 telephone numbers called are saved to a redial list.

You can then select any of the numbers to redial, delete or copy

to the phonebook.

Redial numbers can be up to 32 digits long.

Redial a number from the redial lists

1.

Press the last number you called is displayed.

2.

Press or to scroll to the number you want.

3.

Press to dial.

Save a number from the redial list to

the phonebook

Please see “Copy a Calls list number to the phonebook” on

page 15 for instructions and select the

Dialled Calls

option.

Delete a redial number/delete all redial

Please see “Delete a redial number/delete all redial” on page 9

for instructions and select the

Dialled Calls

option.

To lock the keypad

You can lock the keypad so that it cannot be used accidentally

while carrying it around.

IMPORTANT

When the keypad is locked you can still answer incoming calls

and operate the handset as normal. When the call is ended, the

keypad lock comes on again.

1.

Press and hold . The handset beeps and is

displayed. To unlock the keypad:

2.

Press

Unlock

. Display shows

Press # to Unlock Keys

.

3.

Press .

Paging/Find handset

You can alert a handset user that they are wanted or locate a

missing handset.

Paging calls cannot be answered by a handset.

1.

Press on the base. All handsets registered to the base

will ring and display

Paging Call

.

2.

Press on the base again to stop the ringing or, on any

handset, press

Stop

or any button on the handset to stop all

handsets ringing.

Phonebook

You can store up to 250 names and numbers in the phonebook.

Names can be up to 12 characters long and numbers up to 24

digits. You can also select different ring tones for phonebook

entries.

SEARCH ALPHABETICALLY

Press

Or

Press

Names

.

Search

is highlighted. Press

Select

.

The list of entries is displayed.

Enter the first letter of the name you want. The first name

beginning with that letter is displayed.

Scroll to view any other entries beginning with that letter.

Store a name and number

If you subscribe to a Caller Display Service and want the name

of your caller displayed instead of the number, save the full

telephone number including the dialling code to your

phonebook.

You can store multiple entries with the same name but, to

prevent unnecessary duplicates, you can only store one

number once.

1.

From standby, press

Names

. The phonebook menu is

displayed.

2.

Search

is highlighted. Scroll to

Add Entry

and press

Select

.

3.

Enter the name and press

OK

.

When storing a name the first character is upper case and the rest

lower case.

To change the case manually, Press .

To store a Pause in the number field, press and hold .

To store a Recall in the number field, press .

4.

Enter the number and press

Save

.

5.

Scroll or to the ringtone you want and press

Select

.

The display shows

<NAME> Saved

and returns to the

phonebook menu.

6.

Press

Back

to return to the previous menu level or to return

to standby.

ENTERING NAMES

Use the keypad letters to enter names, e.g. to store TOM:

Press once to enter T.

Press three times to enter O.

Press once to enter M.

WRITING TIPS

Press

Clear

to delete the last character or digit.

Press or to move backwards or forwards through

character/digits.

Press to switch between upper and lower case.

Press to insert a space.

Use for other punctuation characters.

You must enter a name to go with a number.

OPEN THE PHONEBOOK DURING A CALL.

1. During your conversation, press Names.

2. Press

Options

to select

Add Entry

,

Show Details

,

Edit Entry

or

Delete Entry

.

View an entry

1.

Press . The first entry is displayed.

2.

Scroll or to the entry you want or search

alphabetically.

3.

Press

Options

. The display highlights

Show Details

.

4.

Press

Select

to display the name, number and ringtone.

5.

Press

Dial

to call the number or

Back

to return to the

previous level.

Dial an entry

1.

In standby, press . The first entry is displayed.

2.

Scroll or to the entry you want or search

alphabetically.

3.

Press to dial the displayed number.

Edit a name and number

1.

Press .

2.

Scroll or to the entry you want.

3.

Press

Options

and scroll to

Edit Entry

and

press Select

.

4.

Press

Clear

to delete characters, use the keypad to enter

new ones then press

OK

.

5.

Press

Clear

to delete digits, use the keypad to enter new

ones then press

Save

.

EN

D811_IFU_EN.fm Page 9 Friday, September 7, 2007 7:37 PM

10 Using the phone

6.

Scroll or to the ringtone you want and press

Select

to

save the entry.

7.

Press

Back

to return to the previous menu level.

Edit ringtone

1.

Press .

2.

Scroll or to the entry you want.

3.

Press

Options

and scroll to

Ringtone

and press

Select

.

4.

Scroll or to the ringtone you want and select

Select

to

save the entry or select

Default Melody

.

5.

Press

Back

to return to the previous menu level.

Delete an entry

1.

Press .

2.

Scroll or to the entry you want.

3.

Press

Options

and scroll to

Delete Entry

and press

Select

.

4.

Press

Yes

to confirm or

No

to cancel.

5.

Press

Back

to return to standby.

Delete entire phonebook

1.

Press

Names

.

2.

Scroll or to

Delete Phonebook

and press

Select

.

3.

Press

Yes

to confirm or

No

to cancel.

4.

Press

Back

to return to standby.

Copy an entry to another handset

When you have more than one handset registered to your D811

base, you can copy entries between handsets.

1.

Press .

2.

Scroll or to the entry you want.

3.

Press

Options

and scroll to

Copy Entry

and press

Select

.

4.

To Handset

is displayed. Press

Select

.

5.

Available handsets are displayed. Scroll or to the

handset you want and press

Select

.

Copy Phonebook?

is

prompted on the receiving handset. Press

Yes

to accept or

No

to cancel. When completed the sending handset

displays

<NAME> Copied

.

6.

Press

Back

to return to the previous menu level.

Copy the entire phonebook to another

handset

In just a few minutes, you can copy all your phonebook contacts

to another handset.

At the handset you are copying from:

1.

Press

Names

.

2.

Scroll to

Copy Phonebook

and press

Select

.

3.

To Handset

is displayed. Press

Select

.

4.

Available handsets are displayed. Scroll or to the

handset you want and press

Select

. When completed the

display shows the number of entries copied.

5.

Press

Back

to return to the previous menu level.

At the receiving handset:

1.

The display shows

Copy Phonebook?

Press

Yes

to begin

copying or

No

to cancel.

Memory status

You can check how much of the phonebook memory is

available.

1.

Press

Names

.

2.

Scroll to

Memory Status

and press

Select

.

3.

Display shows the number of

Memory Used

and

Memory Free

entries.

4.

Press

Back

to return to the previous menu level.

Copy an entry to a SIM card

1.

Insert the SIM card into the SIM READER slot on the side of

the base.

2.

Press to open the phonebook list then press

Options

.

3.

Scroll to

Copy Entry

and press

Select

.

4.

Scroll to

To SIM

and press

Select

.

5.

If requested, enter your SIM PIN then press

OK

.

The PIN number will be displayed as asterisks for security

reasons.

6.

Display shows

Please wait...X%

as it copies entries from the

SIM. When completed the display shows

<NAME> Copied

.

7.

Press

Back

to return to the previous menu level.

Copy all entries to or from a SIM card

1.

Insert the SIM card into the SIM READER slot on the side

of the base.

2.

Press

Names

.

3.

Scroll to

Copy Phonebook

and press

Select

.

4.

Scroll to either

From SIM

or

To SIM

and press

Select

.

5.

If requested, enter your SIM PIN then press

OK

.

The PIN number will be displayed as asterisks for security

reasons.

6.

Display shows the name of each entry as they are copied.

When completed the display shows the number of entries.

7.

Press

Back

to return to the previous menu level.

COPYING TO A SIM CARD

While copying to and from SIM, if is pressed on any

handset to make a call or try to send a text, the copying process

will stop immediately.

However, if an incoming call is received, the copying process is

cancelled so that the call can be taken.

If the memory becomes full during copying from a SIM, the

display shows

Memory Full Not All Copied

.

Most SIM cards are supported, but if the SIM Card format is not

compatible, the display shows

SIM Format Not Supported

.

COPYING FROM A SIM CARD

When copying from a SIM only the first 12 characters of each

name are copied and the first 24 digits in a number are copied.

If an entry with a duplicate number is found, the entry will not be

copied.

Please Insert SIM Card

will be displayed if you have not already

inserted a SIM card into the base.

Change the dialling code

The Dialling Codes function automatically converts SIM entries

beginning with international dialling codes to the local code. For

example, on a SIM card, + is the international code and 44 is

the country code.

These will be replaced automatically by the local code 0 so that

a number beginning +44207 will be converted to 0207.

1.

Press

Names

.

2.

Scroll to

Dialling Codes

and press

Select

.

3.

Scroll to the part of the dialling code you need to

change,

International

,

Country

or

Local

and press

Select

.

4.

Enter the new code and press

Save

.

5.

Press

Back

to return to the previous menu level.

D811_IFU_EN.fm Page 10 Friday, September 7, 2007 7:37 PM

Handset settings 11

4. Handset settings

Handset ringtone

You can set different ringtones for external calls and internal

calls.

Select from 10 handset ringtones.

You will hear a sample ring for each one you highlight.

1.

Press

Menu

, scroll to

Settings

and press

Select

.

2.

Set Handset

is highlighted. Press

Select

.

3.

Ringtone

is highlighted. Press

Select

.

4.

Press or to highlight

External Call

or

Internal Call

. Press

Save

to confirm.

5.

Scroll or to highlight the ringtone you want.

6.

Press

Select

to confirm.

7.

Press

Back

to return to the previous menu level or to return

to standby.

Handset ringer volume

The handset has 5 ringer volume settings plus Off.

If the volume is set to

Off

the icon is displayed.

1.

Press

Menu

, scroll to

Settings

and press

Select

.

2.

Set Handset

is highlighted. Press

Select

.

3.

Scroll to

Ringer Volume

and press

Select

.

4.

Press or to display the volume level you want. Press

Save

to confirm.

5.

Press

Back

to return to the previous menu level or to return

to standby.

Receiver volume

This sets the standard volume level for the handset earpiece.

There are 8 levels to choose from.

1.

Press

Menu

, scroll to

Settings

and press

Select

.

2.

Set Handset

is highlighted. Press

Select

.

3.

Scroll to

Receiver Volume

and press

Select

.

4.

Press or to display the volume level you want. Press

Save

to confirm.

5.

Press

Back

to return to the previous menu level or to return

to standby.

Handset name

If you are using more than one handset with your D811 base, you can

give each handset a personalised name to easily distinguish between

the handsets.

A name can be up to 10 characters long.

1.

Press

Menu

, scroll to

Settings

and press

Select

.

2.

Set

Handset

is highlighted. Press

Select

.

3.

Scroll to

Handset Name

and press

Select

.

4.

Use the keypad to enter the name and press

Save

.

5.

Press

Back

to return to the previous menu level or to return

to standby.

Display language

The available languages include:

English, Francais, Deutsch, Italiano and Espanol.

1.

Press

Menu

, scroll to

Settings

and press

Select

.

2.

Set Handset

is highlighted. Press

Select

.

3.

Scroll to

Language

and press

Select

.

4.

Scroll or to the language you want and press

Select

.

5.

Press

Back

to return to the previous menu level or to return

to standby.

Wallpaper

1.

Press

Menu

, scroll to

Settings

and press

Select

.

2.

Set Handset

is highlighted. Press

Select

.

3.

Scroll to

Wallpaper

and press

Select

.

4.

Scroll or to the wallpaper you want and press

View

.

5.

On the preview screen, scroll or to see available

wallpapers.

6.

Press

Use

to confirm the wallpaper.

7.

Press

Back

to return to the previous menu level or to return

to standby.

Menu colour

1.

Press

Menu

, scroll to

Settings

and press

Select

.

2.

Set Handset

is highlighted. Press

Select

.

3.

Scroll to

Menu Colour

and press

Select

.

4.

Scroll or to select the colour you want: blue, orange

or pink and press

Select

.

5.

Press

Back

to return to the previous menu level or to return

to standby.

Screensaver

When the screensaver is set to Clock an analogue clock is

displayed.

The screensaver comes on when the screen backlight switches

off in standby mode. To change the backlight timeout setting,

see Light timeout.

1.

Press

Menu

, scroll to

Settings

and press

Select

.

2.

Set Handset

is highlighted. Press

Select

.

3.

Scroll to

Screensaver

and press

Select

.

4.

Scroll or to set the Screensaver to

Clock

or

Off

.

5.

Press

Select

to select

Clock

.

6.

Press

Back

to return to the previous menu level or to return

to standby.

Light timeout

Set how long the backlight stays on after the handset has

returned to standby screen.

1.

Press

Menu

, scroll to

Settings

and press

Select

.

2.

Set Handset

is highlighted. Press

Select

.

3.

Scroll to

Light Timeout

and press

Select

.

4.

Scroll or to set the timeout period you want then

press

Select

.

5.

Press

Back

to return to the previous menu level or to return

to standby.

Display contrast

1.

Press

Menu

, scroll to

Settings

and press

Select

.

2.

Set Handset

is highlighted. Press

Select

.

3.

Scroll to

Display Contrast

and press

Select

.

4.

Scroll or to

Low

,

Medium

or

High

then press

Select

.

5.

Press

Back

to return to the previous menu level or to return

to standby.

Auto talk

If you set Auto Talk to ON, when you receive an incoming call you

can answer it just by lifting your handset from the charger. You do

not need to press .

1.

Press

Menu

, scroll to

Settings

and press

Select

.

2.

Set Handset

is highlighted. Press

Select

.

3.

Scroll to

Auto Talk

and press

Select

.

4.

Scroll or to

On

or

Off

then press

Select

.

5.

Press

Back

to return to the previous menu level or to return

to standby.

Key beep

When you press a button on the D811 handset you hear a

beep. You can switch this on or off.

1.

Press

Menu

, scroll to

Settings

and press

Select

.

2.

Set Handset

is highlighted. Press

Select

.

3.

Scroll to

Key Beep

and press

Select

.

4.

Scroll or to

Off

or

On

then press

Select

.

EN

D811_IFU_EN.fm Page 11 Friday, September 7, 2007 7:37 PM

12 Base settings

5.

Press

Back

to return to the previous menu level or to return

to standby.

PABX access code

If your D811 is connected to a switchboard, you may need to

enter a

one-digit access code in the dialling sequence to be able to

connect to the outside line.

The access code will be displayed at the beginning of a number

on the screen.

The access code will not be used when you dial the number

yourself (rather than for example from the phonebook). This

allows you to make calls to other switchboard extensions.

1.

Press

Menu

, scroll to

Settings

and press

Select

.

2.

Set Handset

is highlighted. Press

Select

.

3.

Scroll to

PABX Access Code

and press

Select

.

4.

Scroll or to

On

,

Off

or

Set Code

then press

Select

.

If you select

Set Code

, enter the switchboard access code

e.g. 9 then press

Save

.

5.

Press

Back

to return to the previous menu level or to return

to standby.

5. Base settings

Base ringtone

Select from 5 base ringtones.

You will hear a sample ring for each one you highlight.

1.

Press

Menu

, scroll to

Settings

and press

Select

.

2.

Scroll to

Set Base

and press

Select

.

3.

Ringtone

is highlighted. Press

Select

.

4.

Scroll or highlight the ringtone you want.

5.

Press

Select

to confirm.

6.

Press

Back

to return to the previous menu level or to return

to standby.

Base ringer volume

The base has 5 ringer volume settings plus Off.

1.

Press

Menu

, scroll to

Settings

and press

Select

.

2.

Scroll to

Set Base

and press

Select

.

3.

Scroll to

Ringer Volume

and press

Select

.

4.

Press or to display the volume level you want. Press

Select

to confirm.

5.

Press

Back

to return to the previous menu level or to return

to standby.

Dialling mode

Your D811 is pre-set to Tone dialling. You should not normally need

to change this setting. The dial mode options are Tone or Pulse.

1.

Press

Menu

, scroll to

Settings

and press

Select

.

2.

Scroll to

Set Base

and press

Select

.

3.

Scroll to

Dialling Mode

and press

Select

.

4.

Press or to highlight

Pulse

or

Tone

then press

Select

to

confirm.

5.

Press

Back

to return to the previous menu level or to return

to standby.

Ring priority

When you have more than one handset registered to your

base, you can set one handset to ring before the other

handsets. This allows one handset user to answer all incoming

first, like a receptionist.

Choose

All Handsets

if you want all handsets to ring at the same

time or

Select Handset

to nominate a handset to ring two times

before the others.

1.

Press

Menu

, scroll to

Settings

and press

Select

.

2.

Scroll to

Set Base

and press

Select

.

3.

Scroll to

Ring Priority

and press

Select

.

4.

Press or to highlight

All Handsets

or

Select Handset

then

press

Select

.

If you choose

Select Handset

all available handsets are

displayed. Scroll or to highlight the handset you want

then press

Select

.

Scroll or to the number of rings you want to set 2, 4

or 6 and press

Select

.

5.

Press

Back

to return to the previous menu level or to return

to standby.

Recall mode

1.

Press

Menu

, scroll to

Settings

and press

Select

.

2.

Scroll to

Set Base

and press

Select

.

3.

Scroll to

Recall Mode

and press

Select

.

4.

Press or to highlight

Recall 1

or

Recall 2

then press

Select

to

confirm.

5.

Press

Back

to return to the previous menu level or to return

to standby.

First ring

If you have subscribed to your network’s Caller Display service, your

D811 does not ring until the caller information has been received

and displayed.

However, if you want your handset to ring without waiting for

the caller information to be displayed, set First Ring to On.

Please note that this will mean the first ring you hear will be the

default ringtone. This will change to any ringtone you have set

once the caller information is displayed.

1.

Press

Menu

, scroll to

Settings

and press

Select

.

2.

Scroll to

Set Base

and press

Select

.

3.

Scroll to

First Ring

and press

Select

.

4.

Press or to

On

or

Off

then press

Select

to confirm.

5.

Press

Back

to return to the previous menu level or to return

to standby.

System PIN

The System PIN is used when changing certain settings and

registration / de-registration. The default setting is 0000. You

can change this to your own preferred number up to 8 digits.

When you enter a PIN the digits are shown as ****.

1.

Press

Menu

, scroll to

Settings

and press

Select

.

2.

Scroll to

Set Base

and press

Select

.

3.

Scroll to

System PIN

and press

Select

.

4.

Enter the old PIN (original setting 0000) and press

OK

.

5.

Enter the new PIN and press

OK

.

D811_IFU_EN.fm Page 12 Friday, September 7, 2007 7:37 PM

Clock & alarm 13

6.

Re-enter the new PIN and press

OK

.

7.

Press

Back

to return to the previous menu level or to return

to standby.

Restore default settings

You can restore your D811 to its default (original) settings.

It will not affect the phonebook, calls list or user’s data, including

personal/recorded outgoing messages and answer machine

messages. All handsets registered to the base will be retained.

All text, answer machine, handset and base settings will be reset.

1.

Press

Menu

, scroll to

Settings

and press

Select

.

2.

Scroll to

Set Base

and press

Select

.

3.

Scroll to

Master Reset

and press

Select

.

4.

Select

Yes

to confirm or

No

to cancel.

5.

Enter the system PIN (original setting 0000) then press

OK

.

The display will show

Reset Compete

and the unit will restart.

If the welcome mode is available then the user is presented

with the country selection screen. Please refer to welcome

mode section.

ECO mode

To reduce the level of power emissions, you can select low

power or ECO mode. When the ECO mode is set to

On

, the

base transmission power will be reduced.

To turn ECO Mode to

On

or

Off

:

1.

Press

Menu

, scroll to

Settings

and press

Select

.

2.

Scroll to

Set Base

and press

Select

.

3.

Scroll to

ECO Mode

and press

Select

.

4.

Press or to highlight

On

or

Off

then press

Select

to

confirm.

The display will show

Set to ON

or

Set to OFF

depending on the

selection together with a confirmation tone.

When set to

ON

, icon is displayed in place of the standard

signal icon.

NOTE

When ECO mode is set to

ON

, the handset range will be reduced.

6. Clock & alarm

Date & time

If you subscribe to your network’s caller display service, the

base sets the date and time for all handsets whenever a call is

received. You can manually set the time on an individual

handset.

1.

Press

Menu

, scroll to

Clock & Alarm

and press

Select

.

2.

Date & Time

is highlighted, press

Select

.

3.

Enter the date using the format DD/MM/YY.

4.

Enter the time and press

Save

.

5.

Press

Back

to return to the previous menu level or to

return to standby.

Set alarm

When the alarm is set, the display shows the icon.

Each handset can have a different alarm setting.

1.

Press

Menu

, scroll to

Clock & Alarm

and press

Select

.

2.

Scroll to

Alarm

and press

Select

.

3.

Press or to select

On

and press

Select

.

4.

Press or to select

Once

,

Monday-Friday

or

On Daily

and

press

Select

.

5.

Enter the time you want the alarm and press

Save

.

6.

Press

Back

to return to the previous menu level or to

return to standby.

If the alarm was set to

Once

, the will disappear from the

screen.

If set to

On Daily

or

Monday-Friday

, the will remain on the

screen.

Alarm on /off

Once an alarm has been set, you can switch the setting On or

Off.

1.

Press

Menu,

scroll to

Clock & Alarm

and press

Select

.

2.

Scroll to

Alarm

and press

Select

.

3.

Press or to select

On

or

Off

and press

Select

.

4.

Press

Back

to return to the previous menu level.

Switch off alarm ring

When the alarm goes off, press

Stop

.

If you are using the handset to make a call when the alarm ring

is due, the flashes and you hear a beep in the earpiece.

Time format

Set the time format to 12 or 24 hour setting.

1.

Press

Menu

, scroll to

Clock & Alarm

and press

Select

.

2.

Scroll to

Time Format

and press

Select

.

3.

Press or to select

12 Hour

or

24 Hour

and press

Select

.

4.

Press

Back

to return to the previous menu level.

Signal icon in

ECO mode

EN

D811_IFU_EN.fm Page 13 Friday, September 7, 2007 7:37 PM

14 Agenda

7. Agenda

Add a new event

Use your D811 to remind you of details of up to five events such

as birthdays, anniversaries or appointments. The entry can be

up to 24 characters long.

Up to 24 characters can be entered as the subject.

1.

Press

Menu

, scroll to

Agenda

and press

Select

.

2.

If no previous event is stored,

Add Event

is highlighted. Press

Select

.

Or

If events are already stored, they are listed. Press

Options

.

Add Event

is highlighted. Press

Select

.

3.

Enter the subject and press

Save

.

4.

Enter the date (DD/MM) and press

Save

.

5.

Enter the time (HH:MM) and press

Save

. If the current time

format setting is 12 hour, select

am

or

pm

.

6.

Press or to select

Silent

or

Alarm

and press

Select

.

If you press

Alarm

:

Scroll or to select

Once

or

Annually

and press

Select

.

If

Once

is selected, scroll or to select when you want

to receive the reminder

At event time or 30 min before

. Press

Select

. Display shows

Saved

.

If

Annually

is selected, then the alarm will sound at the

event’s time.

7.

Press

Back

to return to the previous menu level or to

return to standby.

If you select a silent reminder, the event subject is displayed on

screen but no alarm will sound.

When the event memory is full, the display shows

Memory Full

.

You must delete an event before you can add a new one.

Switch off agenda ring

1.

The event is displayed. Press

View

to stop the alarm and see

the details of the event. Or press

Back

to stop the alarm and

return to the standby screen. If no button is pressed, the alarm

stops after one minute.

Show agenda details

1.

Press

Menu

, scroll to

Agenda

and press

Select

.

2.

Stored events are displayed. If required, scroll to the

event you want and press

Options

.

3.

Scroll to

Show Details

and press

Select

. The description,

date and time of the reminder are displayed.

4.

Press

Back

to return to the previous menu level or to return

to standby.

Edit agenda

1.

Press

Menu

, scroll to

Agenda

and press

Select

.

2.

Stored events are displayed. If required, scroll to the

event you want and press

Options

.

3.

Scroll to

Edit Event

and press

Select

.

4.

Edit the subject and press

Save

.

5.

Edit the date and time then press

Save

.

6.

Press or to select

Silent

or

Alarm

and press

Select

.

If you press

Alarm

:

Scroll or to select

Once

or

Annually

and press

Select

.

If

Once

is selected, scroll or to select when you want

to receive the reminder

At event time or 30 min before

. Press

Select

. Display shows

Saved

.

If

Annually

is selected, then the alarm will sound at the

event’s time.

7.

Press

Back

to return to the previous menu level or to

return to standby.

Send agenda as a text message

1.

Press

Menu

, scroll to

Agenda

and press

Select

.

2.

Stored events are displayed. Scroll to the event you

want and press

Options

.

3.

Scroll to

Send as a Text

and press

Select

.

4.

The event is displayed. Press

Options

to select

Send

option

and enter a destination key.

Delete agenda

1.

Press

Menu

, scroll to

Agenda

and press

Select

.

2.

Stored events are displayed. Scroll to the event you

want and press

Options

.

3.

Scroll to

Delete Event

and press

Select

.

4.

Press

Yes

to confirm or

No

to cancel.

5.

Press

Back

to return to the previous menu level or to return

to standby.

Delete all agendas

1.

Press

Menu

, scroll to

Agenda

and press

Select

.

2.

Stored events are displayed. Press

Options

.

3.

Scroll to

Delete All Events

and press

Select

.

4.

Press

Yes

to confirm or

No

to cancel.

5.

Press

Back

to return to the previous menu level or to return

to standby.

8. Calls lists

IMPORTANT

To use Caller Display you must first subscribe to the service

from your network provider. A quarterly fee may be payable.

To ensure the caller's name is displayed, make sure you have

stored the full telephone number, including the dialling code in

the phonebook.

If the caller’s number is stored in the phonebook, the name

assigned to it is displayed.

If the number is unavailable,

Unavailable

will be displayed.

If the call is from an international number,

International

will be

displayed.

If the call is from the operator,

Operator

will be displayed.

If the call is from a payphone,

Payphone

will be displayed.

If the call is from a ringback request,

Ringback

will be displayed.

Caller Display

If you have subscribed to a Caller Display Service, you will be

able to see your caller’s number on your handset display

(provided it is not withheld) prior to answering the call.

If your caller’s name and number are stored in the phonebook

and a name/number match is found, you will see the caller’s

name on the display instead.

Calls lists

Each handset can hold details of up to 30 answered or

unanswered calls and 20 dialled calls.

The caller’s details are stored in a Calls list whether you

answered the call or not. When the list is full, and a new call is

received, the oldest entry will be deleted automatically.

New calls alert

When you have missed calls, the display shows

You have X new

missed calls

. If you press

Back

, the screen returns to standby and

the icon is displayed.

View new missed calls

1.

When you see the new calls alert, press

View

. You can now

scroll or through the

Missed Calls list

.

2.

Press

Options

.

Show Details

is highlighted. Press

Select

to see

the number, date and time of the call.

3.

Press

Back

to return to the previous menu level or to

return to standby.

D811_IFU_EN.fm Page 14 Friday, September 7, 2007 7:37 PM

Call Waiting 15

View and dial from a Calls list

1.

Press

Menu

, scroll to

Calls Lists

and press

Select

.

Missed

Calls

is highlighted. Scroll or to choose

Missed Calls

,

Received Calls

or

Dialled Calls

.

2.

Press

Select

. You can now scroll or through the list.

3.

Press

Options

.

Show Details

is highlighted.

4.

Press

Select

to see the caller’s number, date and time of

call.

5.

Press

Dial

to call the number.

6.

Press

Back

to return to the previous menu level or to

return to standby.

Copy a Calls list number to the

phonebook

1.

Press

Menu

, scroll to

Calls Lists

then press

Select

.

Missed

Calls

is highlighted.

If required, scroll or to

Received

or

Dialled Calls

then

press

Select

.

2.

Scroll or to the entry you want and press

Options

.

3.

Scroll to

Save Number

. Press

Select

.

4.

Enter a name then press

OK

. The number is displayed,

press

Save

.

If you need to edit the number, use

Clear

to delete any unwanted

digits, then enter new ones using the keypad.

5.

Scroll or to the ringtone you want and press

Select

.

6.

Press

Back

to return to the previous menu level or to

return to standby.

See “Entering names” and “Writing tips” on page 9.

Send a text message to a Calls list

number

1.

Press

Menu

, scroll to

Calls Lists

then press

Select

.

Missed

Calls

is highlighted.

If required, scroll or to

Received

or

Dialled Calls

then

press

Select

.

2.

Scroll or to the entry you want and press

Options

.

3.

Scroll to

Send Message

. Press

Select

.

4.

Write the message then press

Options

.

5.

Send

is highlighted. Then press

Select

. (You can save, insert

a symbol, emoticon or template).

6.

The number is pre-entered on the Send to screen, press

Send

to send the message.

7.

Press

Back

to return to the previous menu level or to

return to standby.

See page 18 for more information on text messaging.

Delete an entry

1.

Press

Menu

, scroll to

Calls Lists

then press

Select

.

Missed

Calls

is highlighted.

If required, scroll or to

Received

or

Dialled Calls

then

press

Select

.

2.

Scroll or to the entry you want and press

Options

.

3.

Scroll to

Delete Call

. Press

Select

.

4.

Press

Back

to return to the previous menu level or to

return to standby.

Delete all entries

You can delete all entries in an individual Calls list or all entries

from all Calls lists.

1.

Press

Menu

, scroll to

Calls List

then press

Select

.

Missed

Calls

is highlighted.

If required, scroll or to

Delete Calls

press

Select

.

2.

Scroll or to highlight

Missed Calls

,

Received Calls

,

Dialled

Calls

or

All Calls

. Press

Select

.

3.

Press

Yes

to confirm or

No

to cancel.

4.

Press

Back

to return to the previous menu level or to

return to standby.

9. Call Waiting

You must subscribe to your network’s Caller Display service for

Call Waiting to work. A quarterly fee may be payable.

1.

During a call, you hear a soft beep in the earpiece and the

display shows the number of the caller or the name if it

matches an entry in your phonebook. If these are not

available, the display shows

Call Waiting

.

2.

Press to put your current caller on hold and speak to the

new caller.

3.

Press again to switch between both callers (In some

countries, it is required to dial R + 2).

4.

Press to finish the current call or to end both calls.

10. Voicemail

If you have subscribed to your network operator’s voicemail

messaging service, your handset can inform you when you

receive new voicemail.

If you have new voicemail,

You have new voicemail

is displayed.

• Press

Listen

to dial the voicemail number preset on the

handset. If your voicemail number is different to the number

stored in the handset, you can manually dial your preferred

voicemail number.

• Or press

Back

to listen to your voicemail at a later time. A

reminder icon will be displayed.

EN

D811_IFU_EN.fm Page 15 Friday, September 7, 2007 7:37 PM

16 Answering machine

11. Answering machine

Your D811 can digitally record up to 12 minutes of messages

or up to 59 messages. Each message can last up to a

maximum of 3 minutes. As well as recording incoming

messages, you can record memos for other users.

You can operate your answering machine from:

• the base.

• the handset.

• remotely, from any other Touchtone™ telephone, see

page 17.

You will need to set the date and time (if you have not already

done so) so that you will know when each message was

received, see page 13. The default day and time setting is

Monday 12.01 pm.

Base control keys

For more information on outgoing messages (OGM), see

page 16.

Switch the answering machine on / off

1.

Press

Menu

, scroll to

Answer Machine

and press

Select

.

2.

Scroll to

Answer On/Off

and press

Select

.

3.

Scroll or to highlight

On

or

Off

and press

Select

. When

switched on, the handset display shows in idle.

This can also be done via the base by pressing on the base.

Answer delay

Answer delay sets the number of times your D811 will ring

before the answer machine picks up your call and starts playing

the outgoing message.

You can change this setting to between 2–9 rings or

Time Saver

.

The default setting is 6 rings.

1.

Press

Menu

, scroll to

Answer Machine

and press

Select

.

2.

Scroll to

Answer Settings

and press

Select

.

3.

Scroll or to

Answer Delay

and press

Select

.

4.

Scroll or to the setting you want and press

Select

.

5.

Press

Back

to return to the previous menu level.

For more information on Time Saver, see “Switch your

answering machine on remotely” on page 18.

Switch message alert tone on / off

When you have new messages, with the audible message alert

switched on, you will hear an audible alert once at the handset and

the TAM base will beep every 10 seconds. The default setting is

Off.

1.

Press

Menu

, scroll to

Answer Machine

and press

Select

.

2.

Scroll to

Answer Settings

and press

Select

.

3.

Scroll or to

Message Alert

and press

Select.

4.

Scroll or to highlight

On

or

Off

and press Select.

5.

Press

Back

to return to previous menu or key to return to

standby.

On-screen alert

When you have new answering machine messages, the

icon is displayed along with

You have X new messages

. All new

messages are indicated by a green dot.

1.

Press

Play

. Or, scroll or the list of messages. Press

Play

to hear the highlighted message.

Outgoing messages

The outgoing message is the message a caller first hears when

the answering machine picks up their call. There are 2

prerecorded outgoing messages to choose from or you can

record your own.

Record your own outgoing message

Your D811 comes with two prerecorded outgoing messages,

Answer and Record or Answer Only, but if you wish you can

record your own.

ANSWER AND RECORD

The pre-set Answer and Record outgoing message, that allows

your caller to leave a message, is “Hello, your call cannot be

taken at the moment, so please leave your message after the

tone”.

Your Answer and Record outgoing message can be up to 3

minutes long and will replace the prerecorded message.

ANSWER ONLY

The pre-set Answer Only outgoing message, where callers hear

an announcement but cannot leave a message, is “Hello, your

call cannot be taken at the moment and you cannot leave a

message, so please call later”.

When recording your Answer Only message, remember to

advise your caller that they will not be able to leave a message.

Your Answer Only message can be up to 12 minutes long

(maximum recording length) and will replace the pre-recorded

message.

However, you should try to keep your message short to allow

time for recording memos, or incoming messages when using

Answer and Record mode.

To record your outgoing message:

1.

Press

Menu

, scroll to

Answer Machine

and press

Select

.

2.

Scroll to

Outgoing

Message

and press

Select

.

3.

Record

is highlighted, press

Select

.

4.

Scroll or to

Answer & Record

or

Answer Only

and press

Select

.

5.

The display shows

Please speak after the tone

.

6.

After the tone, speak your message clearly into the handset

then press

Save

or to end recording.

7.

Your outgoing message is played back. If you want to

delete it, press

Delete

during playback. If you press

Save

or

wait for the message to play back, it will be saved.

Outgoing message language

Change the language of your pre-set outgoing messages.

1.

Press

Menu

, display shows

Answer Machine

and press

Select

.

2.

Scroll to

Answer Settings

and press

Select

.

3.

Language

is displayed, press

Select

.

Press to turn the answering machine on/off

Press and hold to enter the outgoing message (OGM)

selection mode

Press to play all stored messages

Press to pause or resume playback

Press to stop message playback

Skip to the next message during message playback

Select Answer Only OGM during OGM selection mode.

Replay current message

Press twice to skip back to previous message

Select Answer & Record OGM during OGM selection

mode.

Delete current message during message playback

Press to delete personal OGM during OGM playback.

The pre-recorded OGM is selected and played.

Increase speaker volume during message playback

Decrease speaker volume

D811_IFU_EN.fm Page 16 Friday, September 7, 2007 7:37 PM

Answering machine 17

4.

Scroll or to the language you want and press

Select

to confirm.

Check or delete your outgoing

message

Deleting a personal outgoing message automatically reinstates

the prerecorded outgoing message.

You cannot delete a pre-recorded message.

1.

Press

Menu

, scroll to

Answer Machine

and press

Select

.

2.

Scroll to

Outgoing Message

and press

Select

.

3.

Scroll to

Play

and press

Select

.

4.

Scroll or to

Answer & Record

or

Answer Only

and press

Select

.

5.

Press to

Personal OGM

and press

Select

.

6.

The message is played. Press

OK

to stop playback or press

Delete

to delete a personal OGM.

7.

Press

Back

to return to the previous menu level.

Select outgoing message mode

Choose which outgoing message you want to be played to

callers.

1.

Press

Menu

, scroll to

Answer Machine

and press

Select

.

2.

Scroll to

Answer Settings

and press

Select

.

3.

Answer Mode

is highlighted, press

Select

.

4.

Scroll or to

Answer & Record

or

Answer Only

and press

Select

.

5.

If there is a personal OGM saved, press or to

Default

OGM

or

Personal OGM

and press

Select

. Your selection is

confirmed. If there is no personal OGM saved the default

OGM will be selected.

6.

Press

Back

to return to the previous menu level.

Record a memo

Memos can only be recorded via the handset.

1.

Press

Menu

, scroll to

Answer Machine

and press

Select

.

2.

Scroll to

Record Memo

and press

Select

.

3.

The display shows

Please speak after the tone

.

4.

After your hear the tone, speak your memo then press

Save

or to end recording.

5.

Your memo is played back. If you want to delete it, press

Delete

during playback. If you press

Save

or wait for the

message to play back, it will be saved.

6.

Press

Back

to return to the previous menu level.

Call screening

When the answering machine is on and takes a call, you can

use the loudspeaker to listen to the caller leaving a message.

You can then identify the caller and decide whether to take the

call in person.

1.

When your D811 rings, wait for the answering machine to

take the call. When the caller begins leaving a message,

the display shows

Recording

. Press

Screen

to hear the caller.

2.

To interrupt and speak to the caller directly, press

Talk

. Or,

after the caller has hung up, and the display shows

You have

a new message

, press

Play

to play new messages.

3.

Press

Back

to return to the previous menu level.

While screening, you can adjust the volume by pressing or .

Message playback

Each message is played back with day and time of the call

announced as well as the caller’s number. The caller’s number

is displayed (if stored in the phonebook).

When a memo is played back,

Memo

is displayed on the handset.

1.

Press

Menu

and scroll to

Answer Machine

.

Press

Select

.

2.

Play

is highlighted. Press

Select

to choose which messages

you want to play or scroll to

Play All

and press

Select

to

play all messages.

3.

Press

Talk

to switch between the earpiece and handset

loudspeaker.

During playback press

Options

then scroll or to:

Pause

,

Repeat Message

,

Skip Forward

,

Skip Backward

,

Delete

.

4.

Press

Select

to choose the highlighted option. At the end of

playback, press

Back

to return to the previous menu level.

KEYBOARD SHORTCUTS

During playback:

To pause

To resume

To repeat message

To play previous message

To delete current message

To play next message

Delete all old messages

Answering Machine messages that are not deleted are

automatically saved.

New / unplayed messages cannot be deleted.

1.

Press

Menu

, scroll to

Answer Machine

and press

Select

.

2.

Scroll to

Delete Messages

and press

Select

.

3.

Display shows

Delete all old messages

? Press

Yes

to confirm or

No

to cancel.

4.

Press

Back

to return to the previous menu level.

MEMORY FULL

If the memory is within 10 seconds of becoming full while a

caller is leaving a message, they will hear, “Please complete

your message within 10 seconds”. If they are still talking when

the memory becomes full the caller hears, “Thank you for

calling”, and the machine will hang up.

The OGM will set to

Answer Only

. You must delete messages

before your D811 can record new messages.

Remote access

You can operate your answering machine from any

Touchtone™ phone by calling your D811 and entering a 4 digit

security code.

Switch remote access On or Off.

1.

Press

Menu

, scroll to

Answer Machine

and press

Select

.

2.

Scroll to

Answer Settings

and press

Select

.

3.

Scroll or to

Remote Access

and press

Select

.

4.

Scroll or to highlight

On

or

Off

and press

Select

.

5.

Press

Back

to return to previous menu or key to return to

standby.

Change the remote access PIN

1.

Press

Menu

, scroll to

Answer Machine

and press

Select

.

2.

Scroll to

Answer Settings

and press

Select

.

3.

Scroll or to

Remote Access

and press

Select

.

4.

Scroll or to highlight

Set Remote PIN

and press

Select

.

5.

Enter the Old 4-digit PIN and press

Save

. (Default setting =

0000)

6.

Enter the new 4-digit Pin and press

Save

.

7.

Enter the new PIN again and press

Save

.

8.

Press

Back

to return to previous menu or key to return to

standby.

It is advisable to make a note of your new PIN code and keep it

somewhere safe.

This PIN is different from the System PIN used when resetting

the unit or when registering/de-registering handset.

EN

D811_IFU_EN.fm Page 17 Friday, September 7, 2007 7:37 PM

18 Text messaging

Switch your answering machine on

remotely

If you forget to switch your answering machine on, you can do

it remotely from another phone.

1.

Dial your telephone number and let it ring. After 20 rings

you will hear your outgoing message.

2.

Press *, then enter your security code.

(Default setting = 0000)

3.

Press and your answering machine will switch on ready

to answer incoming calls.

Time saver

When you ring in to access your messages remotely, if your

answering machine is set to time saver and you have new

messages it will answer after 2 rings, if you do not have any

new messages, it will answer after 6 rings. This means you can

hang up after 3 rings knowing you have no new messages,

saving you time and the cost of the call.

You cannot use this feature if you have certain network features

active as the call will be intercepted before the 20 rings.

Play messages

1.

Dial your phone number. When you hear your outgoing

message, press .

2.

Enter your 4 digit PIN. (Default setting = 0000)

3.

Use the keypad to operate your answering machine:

To hear main menu

To play messages

To play new messages

To skip back during messages

To delete during messages

To skip forward during messages

To set to answer only or answer and record

To record a new outgoing message

To set answer off

To set answer on

If you have any new messages they will be played after you

have entered your security PIN code.

If you enter an incorrect PIN code you will hear ‘Incorrect

security code. Please enter your security code’. You can try

entering the code again. If it is still incorrect you will hear the

voice prompt and your D811 will hang up.

12. Text messaging

Welcome to the text messaging Service on your D811. Your

D811 can send and receive text messages from participating

mobile networks and compatible landline telephones in the UK.

IMPORTANT

You must subscribe to your Network Provider’s Caller Display

service so that you can use text messaging and you must not

withhold your telephone number.

A quarterly fee may be payable, please contact your network

provider for more details.

Subscribe to the text messaging

service

When you send your first text message from your D811 you will

automatically be registered for the service.

If you have Set-Up problems, please check with your Network

provider.

Send a text message

If you are writing a text and you receive a call, the text will be

displayed again when

Write Message

is selected.

1.

Press

Menu

,

Text Messaging

is displayed, press

Select

.

2.

Write Message

is highlighted. Press

Select

.

3.

Use the keypad to enter your message.

4.

Press

Options

.

Send

is highlighted Press

Select

to send the message. Enter the

phone number or press

Search

to open the

phonebook then scroll to the number you

want and press

Select

. Now press

Send

.

Or scroll or to:

Save

Press

Select

to save the message in the

Drafts folder.

Insert Symbol

Press

Select

. The symbol table is displayed.

Press or to highlight the symbol you

want then press

Insert

.

.,-?!¡¿'@:;

/"()_+&%*=<

> £ $ ¥ ¤\~#§

€

D811_IFU_EN.fm Page 18 Friday, September 7, 2007 7:37 PM

Text messaging 19

Insert Emoticon

Press

Select

. The Emoticon table is

displayed. Press or to highlight the

Emoticon you want then press

Insert

.

Insert Template Press

Select

. The list of templates is

displayed. Press or to highlight the

Template you want then press

Insert

.

5.

When sending a message, the display shows

Sending

Message

then

Message Sent

.

WRITING TIPS

Press

Clear

to delete incorrect characters.

Use or to move the cursor through the text, if you want

to insert/delete text.

UPPER & LOWER CASE

Press to switch between upper case ABC, lower case abc

letters and numbers.

Maximum number of characters in a text message is 160. The

display shows a character countdown from 160 down to 0

(Unless message size is set to 612 characters).

If the text is unsuccessful, the message

Message Sending Failed!

will be displayed.

In order to send and receive text messages you must not

withhold your number.

Standard text entry

With standard text entry you can enter a word by pressing each

letter button a number of times to display the character you

want on the screen. For example, to write the word “Hello”,

press twice, twice, three times, three times and

three times.

Receiving and reading text messages

Your D811 can store up to a total of 50 short messages across

all handset Outboxes, Drafts boxes and Inboxes.

When you receive a new text message, the icon is

displayed along with

You have X new messages

.

DO YOU HAVE TWO TEXT PHONE BASES

CONNECTED TO THE SAME PHONE LINE?

If you have two text phone base stations plugged into one line,

you are likely to experience problems receiving text messages.

Normally, only one SMS enabled base unit (DECT or cordless)

can be plugged into any line.

If you do want to use two base units and still receive written text

you must delete receive service centre number from one of the

base stations. To do this on your D811, see page 20.

This will allow you to send text via either base station but texts

will only be received on the product with the active receive

centre number.

If the base unit with the active receive centre number is a DECT

product then all handsets registered to will be able to receive

text messages.

MEMORY FULL ALERT

If the text mailboxes are full when you attempt to write a new

message the display shows

Memory Full Delete Messages

. You must

delete messages before you can write and send a new one.

Read a new message

Received messages are stored in the Inbox.

1.

The Inbox is opened and the list of messages displayed. If

you press

Back

the message is stored in the Inbox for

reading later.

2.

In the Inbox scroll (to more recent messages) or (to

earlier list of messages) through the list of messages.

3.

Highlight the message you want to read and press

Read

or

press

Back

to return to Text messaging menu.

4.

Press to return to standby.

Read, forward, delete, view and save

numbers of texts in the Inbox

When you see the new message alert, if you press

Back

the

message is stored in your Inbox so you can read it later.

1.

To open the Inbox, press

Menu

,

Text Messaging

is displayed.

Press

Select

.

2.

Scroll to

Inbox

and press

Select

.

If you have new messages (indicated by a green dot), you

will go straight to the Inbox, if not scroll to

Inbox

and

press

Select

.

3.

Scroll or to the message you want and press

Read

.

Scroll or through the message.

4.

Press

Options

and scroll or to:

Reply

Press

Select

. Write your reply then press

Options

and select

Send

.

Forward

Press

Select

. The message is displayed.

Press

Options

. Display highlights

Send

. Press

Select

and enter a number or search for the

number then press

Send

.

Message Details

You can see who sent the message and

then call them. Press

Select

the sender’s

number is displayed. Press

Dial

if you want

to call the number.

Use Number

To call the sender, press

Select

. The display

shows

Call

. Press

Select

to call the sender

OR to save the number, scroll to

Save

and press

Select

. Enter a name and press

OK

, edit the number if required then press

Save

. Scroll or to the ringtone and

press

Select

. The number is saved in the

phonebook.

Delete

Press

Select

. Press

Yes

to confirm or

No

to

cancel.

Edit or send texts in the Drafts box

If you save a message to complete or send later it will be stored

in the Drafts box. Only one message can be saved in each

user’s Drafts box.

1.

To open the Drafts box, press

Menu

,

Text Messaging

is

displayed. Press

Select

.

2.

Scroll to

Drafts

and press

Select

.

3.

Press

Edit

to edit your message content.

4.

Press

Options

and scroll or to

Send

,

Save

,

Insert Symbol

,

Insert Emoticon

and

Insert Template

.

5.

When sending a message, the display shows

Sending

Message

then

Message Sent

.

Forward or delete texts in the Outbox

Your D811’s outbox is like a redial list. It holds a copies of up to

5 sent messages. When the Outbox is full, a new message

replaces the oldest.

EN

D811_IFU_EN.fm Page 19 Friday, September 7, 2007 7:37 PM

20 Text messaging

1.

To open the Outbox box, press

Menu

,

Text Messaging

is

displayed. Press

Select

. Scroll to

Outbox

and press

Select

.

2.

Scroll or to the message you want and press

Read

.

Scroll or through the message.

3.

Press

Options

and scroll or to:

Forward

Press

Select

. The message is displayed.

Press

Options

. Display highlights

Send

. Press

Select

and enter the number or press

Search

to search the phonebook. When the

number is entered, press

Send

.

Delete

Press

Select

then press

Yes

to confirm or

No

to cancel.

4.

Press to return to standby.

Edit templates

You can set the templates to your preferred message, up to a

maximum of 32 characters. You can store up to 3 templates

1.

Press

Menu

,

Text Messaging

is displayed. Press

Select

scroll

to

Templates

and press

Select

.

2.

Scroll or to the template you want and press

Options

.

Edit

Press

Select

. Press

Clear

to delete

characters. Enter your template text and

press

Save

.

Delete

Press

Select

. Press

Yes

to confirm or

No

to

cancel.

3.

Press to return to standby.

If you delete a template without replacing the text it is marked

as

Empty

.

Deleting texts

1.

Press

Menu

,

Text Messaging

is displayed. Press

Select

scroll

to

Delete Messages

and press

Select

.

2.

Scroll or to

Inbox

,

Drafts

,

Outbox

or

All Messages

and

press

Select

.

3.

Press

Yes

to confirm or

No

to cancel.

4.

Press

Back

to return to standby.

Selecting

All messages

will delete all messages stored in your

Inbox, Outbox and Drafts box.

Service Centre numbers

To send and receive text messages you need the telephone

number of your Network’s text Centre. If you accidentally delete

the Outgoing or Incoming Service Centre numbers you will

need to re-enter them in order for your text Service to work. You

can enter up to 4 Service Centre numbers – two incoming and

two outgoing.

If you have more than one ‘Server Centre’ stored on your D811

you will need to select which one you want to use for sending

(see next section).

Add or change Service Centre

numbers

1.

Press

Menu

,

Text Messaging

is displayed. Press

Select

, scroll

or to

Text Settings

and press

Select

.

2.

Service Centres

is highlighted press

Select

.

3.

Scroll or to

Receive Centres

or

Send Centre

and press

Select

.

4.

Scroll or to

Receive Centre 1

or

Receive Centre 2

, or

Send

Centre 1

or

Send Centre 2

and press

Select

.

5.

Enter the number for the centre and press

Save

.

6.

Press

Back

to return to the previous menu level. To return to

standby, close the cover or press .

Set send centre

1.

Press

Menu

,

Text Messaging

is displayed. Press

Select

. Scroll

or to

Text Settings

and press

Select

.

2.

Service Centres

is highlighted press

Select

.

3.

Press

Select

again to choose

Set Send Centre

.

4.

Scroll or to

Receive Centre 1

or

Receive Centre 2

or

Send

Centre 1

or

Send Centre 2

and press

Select

.

5.

Press

Back

to return to the previous menu level.

Message alert tone

When you receive a text message, the message alert tone will

sound. These beeps can be switched on or off.

1.

Press

Menu

,

Text Messaging

is displayed. Press

Select

. Scroll

to

Text Settings

and press

Select

.

2.

Scroll to

Message Alert

and press

Select

.

3.

Scroll or to

On

or

Off

and press

Select

.

4.

Press

Back

to return to the previous menu level.

Set message size

A standard text message is 160 characters long. You can set a

message to be up to 612 characters and the message will be

sent as up to 4 linked messages each up to 160 characters

long.

1.

Press

Menu

,

Text Messaging

is displayed. Press

Select

. Scroll

to

Text Settings

and press

Select

.

2.

Scroll to

Message Size

and press

Select

.

3.

Scroll or to highlight 160 or 612 characters, then

press

Select

.

4.

Press

Back

to return to the previous menu level.

User areas

Your D811 is pre-set to make all text messages available to

every user, with all messages sent from and received at a

‘Common Box’.

To keep your messages private, you can set up to 4 PIN

protected personal user areas (sub-addresses). Each personal

user area has its own Inbox and Outbox which are only

accessible when the correct PIN is entered.

You can also keep a common box sub address for incoming

messages that do not need to be kept private.

Add a user mailbox

If you set-up personal user boxes you must tell people your

user area number. They must put the relevant user area

number at the end of your telephone number when they send

you a text message. If they do not include the user area

number, the messages will be stored in the common box and

will be accessible to all users of your D811.

The mailbox number can only be any number from 0-9 but must

not be the same as another user’s mailbox number or the

common or public box number.

1.

Press

Menu

,

Text Messaging

is displayed. Press

Select

. Scroll

to

Text Settings

and press

Select

.

2.

Scroll to

Users

and press

Select

.

3.

User 1

is highlighted. Scroll or to select another User.

4.

Press

Options

.

Edit

is highlighted. Press

Select

.

5.

Enter the user name (up to 8 characters) and press

Save

.

6.

Use the single digit mailbox number displayed or enter your

own single digit mailbox number then press

Save

.

7.

Enter a 4-digit mailbox PIN and press

Save

.

8.

Enter the password again and press

Save

.

9.

Press

Back

to return to the previous menu level.

Open and read a mailbox text

Once mailboxes have been set, when you open the

Text

Messaging

menu, the mailboxes in use will be displayed. You can

open the General User Mailbox without any password but each

user area requires you to enter the 4-digit password PIN.

1.

The display shows

You have X new messages

.

2.

Press

Read

. The mailboxes are displayed. Mailboxes with

new messages are marked with green dots.

3.

Scroll to the mailbox you want and press

Select

.

4.

Enter the mailbox 4-digit PIN and press

OK

.

5.

Scroll or to the message you want and press

Read

.

D811_IFU_EN.fm Page 20 Friday, September 7, 2007 7:37 PM

La pagina sta caricando ...

Motorola D810 series Manuale utente

Motorola D810 series Manuale utente

in altre lingue

Documenti correlati

Altri documenti