JVC KD-X162 Manuale del proprietario

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

ENGLISH

ESPAÑOL

NEDERLANDS

PORTUGUÊS

B5A-2653-00 [E]

KD-X262 / KD-X162 / KD-X161

DIGITAL MEDIA RECEIVER

INSTRUCTION MANUAL

RECEPTOR DE MEDIOS DIGITALES

MANUAL DE INSTRUCCIONES

DIGITALE MEDIAONTVANGER

GEBRUIKSAANWIJZING

RECEPTOR MÉDIA DIGITAL

MANUAL DE INSTRUÇÕES

JS_JVC_KD_X262_E_C.indd 1JS_JVC_KD_X262_E_C.indd 1 8/14/2018 11:34:11 AM8/14/2018 11:34:11 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

i

Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable

for countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste.

Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling

these items and their waste byproducts.

Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and

waste disposal will help conserve resources whilst preventing detrimental effects on our health and the

environment.

Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead.

Información acerca de la eliminación de equipos eléctricos, electrónicos y baterías al final de

la vida útil (aplicable a los países que hayan adoptado sistemas independientes de recogida

de residuos)

Los productos y las baterías con el símbolo de un contenedor con ruedas tachado no podrán ser desechados

como residuos domésticos.

Los equipos eléctricos, electrónicos y baterías al final de la vida útil, deberán ser reciclados en

instalaciones que puedan dar el tratamiento adecuado a estos productos y a sus subproductos residuales

correspondientes.

Póngase en contacto con su administración local para obtener información sobre el punto de recogida más

cercano. Un tratamiento correcto del reciclaje y la eliminación de residuos ayuda a conservar los recursos y

evita al mismo tiempo efectos perjudiciales en la salud y el medio ambiente.

Nota: El símbolo “Pb” debajo del (contenedor con ruedas tachado) en baterías indica que dicha batería

contiene plomo.

Informatie over het weggooien van elektrische en elektronische apparatuur en batterijen

(particulieren)

Dit symbool geeft aan dat gebruikte elektrische, elektronische producten en batterijen niet bij het normale

huishoudelijke afval mogen.

Lever deze producten in bij de aangewezen inzamelingspunten, waar ze gratis worden geaccepteerd en op

de juiste manier worden verwerkt, teruggewonnen en hergebruikt.

Voor inleveradressen zie www.nvmp.nl, www.ictmilieu.nl, www.stibat.nl. Wanneer u dit product op de

juiste manier als afval inlevert, spaart u waardevolle hulpbronnen en voorkomt u potentiële negatieve

gevolgen voor de volksgezondheid en het milieu, die anders kunnen ontstaan door een onjuiste verwerking

van afval.

Opgelet: Het teken “Pb” onder het teken van de batterijen geeft aan dat deze batterij lood bevat.

Informação sobre a forma de deitar fora Velho Equipamento Eléctrico, Electrónico e baterias

(aplicável nos países que adotaram sistemas de recolha de lixos separados)

Produtos e baterias com o símbolo (caixote do lixo com um X) não podem ser deitados fora junto com o

lixo doméstico.

Equipamentos velhos eléctricos, electrónicos e baterias deverão ser reciclados num local capaz de o fazer

bem assim como os seus subprodutos.

Contacte as autoridades locais para se informar de um local de reciclagem próximo de si. Reciclagem e

tratamento de lixo correctos ajudam a poupar recursos e previnem efeitos prejudiciais na nossa saúde e

no ambiente.

Note: o símbolo “Pb” abaixo do símbolo em baterias indica que esta bateria contém chumbo.

JS_JVC_KD_X262_E_C.indd iJS_JVC_KD_X262_E_C.indd i 8/14/2018 11:34:13 AM8/14/2018 11:34:13 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

ii

For Israel

JS_JVC_KD_X262_E_C.indd iiJS_JVC_KD_X262_E_C.indd ii 8/14/2018 11:34:13 AM8/14/2018 11:34:13 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

iii

Declaration of Conformity with regard to the RE Directive 2014/53/EU

Declaration of Conformity with regard to the RoHS Directive 2011/65/EU

Manufacturer:

JVC KENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

EU Representative:

JVCKENWOOD Europe B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS

Declaración de conformidad con respecto a la Directiva RE 2014/53/EU

Declaración de conformidad con respecto a la Directiva RoHS 2011/65/EU

Fabricante:

JVC KENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

Representante en la UE:

JVCKENWOOD Europe B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS

Conformiteitsverklaring met betrekking tot de RE-richtlijn van de Europese

Unie (2014/53/EU)

Conformiteitsverklaring met betrekking tot de RoHS richtlijn van de Europese

Unie (2011/65/EU)

Fabrikant:

JVC KENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

EU-vertegenwoordiger:

JVCKENWOOD Europe B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS

Declaração de conformidade relativa à Directiva RE 2014/53/EU

Declaração de conformidade relativa à Directiva RoHS 2011/65/EU

Fabricante:

JVC KENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

Representante na UE:

JVCKENWOOD Europe B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS

English

Hereby, JVCKENWOOD declares that the radio equipment

“KD-X262/KD-X162/KD-X161” is in compliance with

Directive 2014/53/EU.

The full text of the EU declaration of conformity is available

at the following internet address:

http://www.jvc.net/cs/car/eudoc/

Français

Par la présente, JVCKENWOOD déclare que l’équipement

radio « KD-X262/KD-X162/KD-X161 » est conforme à la

directive 2014/53/UE.

L’intégralité de la déclaration de conformité UE est

disponible à l’adresse Internet suivante :

http://www.jvc.net/cs/car/eudoc/

Deutsch

Hiermit erklärt JVCKENWOOD, dass das Funkgerät

“KD-X262/KD-X162/KD-X161” der Richtlinie 2014/53/EU

entspricht.

Der volle Text der EU-Konformitätserklärung steht unter der

folgenden Internetadresse zur Verfügung:

http://www.jvc.net/cs/car/eudoc/

Nederlands

Hierbij verklaart JVCKENWOOD dat de radioapparatuur

“KD-X262/KD-X162/KD-X161” in overeenstemming is met

Richtlijn 2014/53/EU.

De volledige tekst van de EU-verklaring van

overeenstemming is te vinden op het volgende

internetadres:

http://www.jvc.net/cs/car/eudoc/

Italiano

Con la presente, JVCKENWOOD dichiara che l΄apparecchio

radio “KD-X262/KD-X162/KD-X161” è conforme alla

Direttiva 2014/53/UE.

Il testo integrale della dichiarazione di conformità UE è

disponibile al seguente indirizzo internet:

http://www.jvc.net/cs/car/eudoc/

Español

Por la presente, JVCKENWOOD declara que el equipo de

radio “KD-X262/KD-X162/KD-X161” cumple la Directiva

2014/53/EU.

El texto completo de la declaración de conformidad con la UE

está disponible en la siguiente dirección de internet:

http://www.jvc.net/cs/car/eudoc/

Português

Deste modo, a JVCKENWOOD declara que o equipamento de

rádio “KD-X262/KD-X162/KD-X161” está em conformidade

com a Diretiva 2014/53/UE.

O texto integral da declaração de conformidade da UE está

disponível no seguinte endereço de internet:

http://www.jvc.net/cs/car/eudoc/

Polska

Niniejszym, JVCKENWOOD deklaruje, że sprzęt radiowy

“KD-X262/KD-X162/KD-X161” jest zgodny z dyrektywą

2014/53/UE.

Pełny tekst deklaracji zgodności EU jest dostępny pod

adresem:

http://www.jvc.net/cs/car/eudoc/

Český

Společnost JVCKENWOOD tímto prohlašuje, že rádiové

zařízení “KD-X262/KD-X162/KD-X161” splňuje podmínky

směrnice 2014/53/EU.

Plný text EU prohlášení o shodě je dostupný na následující

internetové adrese:

http://www.jvc.net/cs/car/eudoc/

Magyar

JVCKENWOOD ezennel kijelenti, hogy a „KD-X262/KD-X162/

KD-X161“ rádióberendezés megfelel a 2014/53/EU

irányelvnek.

Az EU konformitási nyilatkozat teljes szövege az alábbi

weboldalon érhető el:

http://www.jvc.net/cs/car/eudoc/

JS_JVC_KD_X262_E_C.indd iiiJS_JVC_KD_X262_E_C.indd iii 8/14/2018 11:34:13 AM8/14/2018 11:34:13 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

iv

Svenska

Härmed försäkrar JVCKENWOOD att

radioutrustningen “KD-X262/KD-X162/KD-X161”

är i enlighet med direktiv 2014/53/EU.

Den fullständiga texten av EU-försäkran

om överensstämmelse finns på följande

Internetadress :

http://www.jvc.net/cs/car/eudoc/

Suomi

JVCKENWOOD julistaa täten, että radiolaite

“KD-X262/KD-X162/KD-X161” on direktiivin

2014/53/EU mukainen.

EU-vaatimustenmukaisuusvakuutusvaatimus

löytyy kokonaisuudessaan seuraavasta internet-

osoitteesta:

http://www.jvc.net/cs/car/eudoc/

Slovensko

S tem JVCKENWOOD izjavlja, da je radijska oprema

»KD-X262/KD-X162/KD-X161« v skladu z Direktivo

2014/53/EU.

Celotno besedilo direktive EU o skladnosti je

dostopno na tem spletnem naslovu:

http://www.jvc.net/cs/car/eudoc/

Slovensky

Spoločnosť JVCKENWOOD týmto vyhlasuje, že

rádiové zariadenie „KD-X262/KD-X162/KD-X161“

vyhovuje smernici 2014/53/EÚ.

Celý text EÚ vyhlásenia o zhode nájdete na

nasledovnej internetovej adrese:

http://www.jvc.net/cs/car/eudoc/

Dansk

Herved erklærer JVCKENWOOD, at

radioudstyret “KD-X262/KD-X162/KD-X161” er i

overensstemmelse med Direktiv 2014/53/EU.

EU-overensstemmelseserklæringens fulde ordlyd

er tilgængelig på følgende internetadresse:

http://www.jvc.net/cs/car/eudoc/

Ελληνικά

Με το παρόν, η JVCKENWOOD δηλώνει ότι ο

ραδιοεξοπλισμός «KD-X262/KD-X162/KD-X161»

συμμορφώνεται με την Οδηγία 2014/53/ΕΕ.

Το πλήρες κείμενο της δήλωσης συμμόρφωσης

της ΕΕ είναι διαθέσιμο στην ακόλουθη διεύθυνση

στο διαδίκτυο:

http://www.jvc.net/cs/car/eudoc/

Eesti

Käesolevaga JVCKENWOOD kinnitab, et

„KD-X262/KD-X162/KD-X161“ raadiovarustus on

vastavuses direktiiviga 2014/53/EL.

ELi vastavusdeklaratsiooni terviktekst on

kättesaadav järgmisel internetiaadressil:

http://www.jvc.net/cs/car/eudoc/

Latviešu

JVCKENWOOD ar šo deklarē, ka radio aparatūra

„KD-X262/KD-X162/KD-X161” atbilst direktīvas

2014/53/ES prasībām.

Pilns ES atbilstības deklarācijas teksts ir pieejams

šādā tīmekļa adresē:

http://www.jvc.net/cs/car/eudoc/

Lietuviškai

Šiuo JVCKENWOOD pažymi, kad radijo įranga

„KD-X262/KD-X162/KD-X161“ atitinka 2014/53/EB

direktyvos reikalavimus.

Visą EB direktyvos atitikties deklaracijos tekstą

galite rasti šiuo internetiniu adresu:

http://www.jvc.net/cs/car/eudoc/

Malti

B’dan, JVCKENWOOD jiddikjara li t-tagħmir

tar-radju “KD-X262/KD-X162/KD-X161” huwa

konformi mad-Direttiva 2014/53/UE.

It-test kollu tad-dikjarazzjoni ta’ konformità huwa

disponibbli fl-indirizz intranet li ġej:

http://www.jvc.net/cs/car/eudoc/

HRVATSKI / SRPSKI JEZIK

JVCKENWOOD ovim izjavljuje da je radio oprema

“KD-X262/KD-X162/KD-X161” u skladu s

Direktivom 2014/53/EU.

Cjeloviti tekst deklaracije Europske unije o

usklađenosti dostupan je na sljedećoj internet

adresi:

http://www.jvc.net/cs/car/eudoc/

ROMÂNĂ

Prin prezenta, JVCKENWOOD declară că

echipamentul radio “

KD-X262/KD-X162/KD-X161

”

este în conformitate cu Directiva 2014/53/UE.

Textul integral al declarației de conformitate UE este

disponibil la urmatoarea adresă de internet:

http://www.jvc.net/cs/car/eudoc/

БЪЛГАРСКИ

С настоящото JVCKENWOOD

декларира, че радиооборудването на

“

KD-X262/KD-X162/KD-X161

” е в съответствие с

Директива 2014/53/ЕС.

Пълният текст на ЕС декларацията за

съответствие е достъпен на следния интернет

адрес:

http://www.jvc.net/cs/car/eudoc/

Turkish

Burada, JVCKENWOOD “

KD-X262/KD-X162/

KD-X161

” radyo ekipmanının 2014/53/AB

Direktifine uygun olduğunu bildirir.

AB uyumluluk deklarasyonunun tam metni

aşağıdaki internet adresinde mevcuttur.

http://www.jvc.net/cs/car/eudoc/

Русский

JVCKENWOOD настоящим

заявляет, что радиооборудование

«KD-X262/KD-X162/KD-X161» соответствует

Директиве 2014/53/EU.

Полный текст декларации соответствия

ЕС доступен по следующему адресу в сети

Интернет:

http://www.jvc.net/cs/car/eudoc/

Українська

Таким чином, компанія JVCKENWOOD

заявляє, що радіообладнання

«KD-X262/KD-X162/KD-X161» відповідає

Директиві 2014/53/EU.

Повний текст декларації про відповідність ЄС

можна знайти в Інтернеті за такою адресою:

http://www.jvc.net/cs/car/eudoc/

JS_JVC_KD_X262_E_C.indd ivJS_JVC_KD_X262_E_C.indd iv 8/14/2018 11:34:13 AM8/14/2018 11:34:13 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

2

ENGLISH

BEFORE USE

IMPORTANT

• To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe Warnings

and Cautions in this manual.

• Please keep the manual in a safe and accessible place for future reference.

WARNING

• Do not operate any function that takes your attention away from safe driving.

Caution

Volume setting:

• Adjust the volume so that you can hear sounds outside the car to prevent accidents.

• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.

General:

• Avoid using the external device if it might hinder safe driving.

• Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.

• Never put or leave any metallic objects (such as coins or metal tools) inside the unit to prevent a short circuit.

CONTENTS

BEFORE USE 2

BASICS 3

GETTING STARTED 5

1 Cancel the demonstration

2 Set the clock and date

3 Set the basic settings

RADIO 6

AUX 8

USB/iPod/ANDROID 8

AUDIO SETTINGS 10

DISPLAY SETTINGS 13

REFERENCES 14

Maintenance

More information

TROUBLESHOOTING 16

INSTALLATION/

CONNECTION 17

SPECIFICATIONS 20

How to read this manual

• Operations are explained mainly using buttons on the faceplate of KD-X262 and KD-X161.

• English indications are used for the purpose of explanation. You can select the display language from the menu. (Page 6)

• [XX] indicates the selected items.

• (Page XX) indicates references are available on the stated page.

JS_JVC_KD_X262_E_EN_3.indd 2JS_JVC_KD_X262_E_EN_3.indd 2 8/14/2018 11:35:01 AM8/14/2018 11:35:01 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

3

ENGLISH

BASICS

To On the faceplate

Turn on the power

Press B SRC.

• Press and hold to turn off the power.

Adjust the volume Turn the volume knob.

Press the volume knob to mute the sound or pause playback.

• Press again to cancel. The volume level returns to the previous level before muting or pause.

Select a source

• Press B SRC repeatedly.

• Press B SRC, then turn the volume knob within 2 seconds.

Change the display information

Press

repeatedly. (Page 15)

Select an item

1 Turn the volume knob to select an item.

2 Press the knob to confirm.

Attach

How to reset

Detach

Faceplate

Your preset

adjustments will be

erased except stored

radio stations.

KD-X262/KD-X162:

KD-X162

Volume knob

Detach button

Source button

Display window

JS_JVC_KD_X262_E_EN_3.indd 3JS_JVC_KD_X262_E_EN_3.indd 3 8/14/2018 11:35:03 AM8/14/2018 11:35:03 AM

4

ENGLISH

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

BASICS

To On the faceplate

Turn on the power

Press SRC-B.

• Press and hold to turn off the power.

Adjust the volume Press VOL +/– .

• Press and hold VOL + to continuously increase the volume to 15.

Press * ENTER to mute the sound or pause playback.

• Press again to cancel. The volume level returns to the previous level before muting or pause.

Select a source

• Press SRC-B repeatedly.

• Press SRC-B, then press VOL +/– within 2 seconds.

Change the display information

Press

repeatedly. (Page 15)

Select an item

1 Press VOL +/– to select an item.

2 Press * ENTER to confirm.

Attach

How to reset

Detach

Faceplate

KD-X161:

Symbolic button

Detach button

Source button

Display window

Your preset

adjustments will be

erased except stored

radio stations.

JS_JVC_KD_X262_E_EN_3.indd 4JS_JVC_KD_X262_E_EN_3.indd 4 8/14/2018 11:35:04 AM8/14/2018 11:35:04 AM

ENGLISH

5

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

GETTING STARTED

For key layout on the faceplate, see page 3 or page 4.

Cancel the demonstration

When you turn on the power for the first time (or after you reset the unit),

the display shows:

KD-X262/KD-X162:

“CANCEL DEMO”

“PRESS” “VOLUME KNOB”

1 Press the volume knob.

[YES]

is selected for the initial setup.

2 Press the volume knob again.

“DEMO OFF” appears.

KD-X161:

“CANCEL DEMO” “PRESS ENTER”

1 Press * ENTER.

[YES]

is selected for the initial setup.

2 Press * ENTER again.

“DEMO OFF” appears.

Set the clock and date

1

Press and hold .

2 Perform ‘Select an item (page3 or 4)’ operation to select

[CLOCK]

.

3 Perform ‘Select an item (page3 or 4)’ operation to adjust the

clock.

[CLOCKADJUST]

set the hour and minute

[CLOCKFORMAT]

[12H]

or

[24H]

4 Perform ‘Select an item (page3 or 4)’ operation to set the date.

[DATESET]

set the day, month and year

5 Press to exit.

1

2

To return to the previous setting item, press .

Set the basic settings

1

Press and hold .

2 Perform ‘Select an item (page3 or 4)’ operation to select an

item (see the following table).

3 Repeat step 2 until the desired item is selected or activated.

4 Press to exit.

To return to the previous setting item, press

.

Default: [XX]

[SYSTEM]

[KEY BEEP]

[ON]: Activates the keypress tone. ; [OFF]: Deactivates.

[SOURCE SELECT]

[AM SRC]*

[ON]: Enables AM in source selection. ; [OFF]: Disables. (Page 6)

[BUILT-IN AUX]*

[ON]: Enables AUX in source selection. ; [OFF]: Disables. (Page 8)

[F/W UPDATE]

[UPDATE SYSTEM]

[F/W UP xxxx]

[YES]: Starts upgrading the firmware. ; [NO]: Cancels (upgrading is not

activated).

For details on how to update the firmware, visit

<http://www.jvc.net/cs/car/>.

* Not displayed when the corresponding source is selected.

3

JS_JVC_KD_X262_E_EN_3.indd 5JS_JVC_KD_X262_E_EN_3.indd 5 8/14/2018 11:35:05 AM8/14/2018 11:35:05 AM

6

ENGLISH

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

[CLOCK]

[TIME SYNC]

[ON]: The clock time is automatically set using

the Clock Time (CT) data in FM Radio Data

System signal. ; [OFF]: Cancels.

[CLOCK

DISPLAY]

[ON]: The clock time is shown on the

display even when the unit is turned off. ;

[OFF]: Cancels.

[ENGLISH]

Select the display language for menu and music

information if applicable.

By default, [ENGLISH] is selected.

[РУССКИЙ]

[ESPANOL]

[FRANCAIS]

RADIO

For key layout on the faceplate, see page 3 or page 4.

Search for a station

1

Press source button repeatedly to select FM or AM.

2 Press S / T to search for a station automatically.

(or)

Press and hold S / T until “M” flashes, then press repeatedly to search for a station

manually.

• “STEREO” lights up when receiving an FM stereo broadcast with sufficient signal strength.

• The unit switches to FM alarm automatically when receiving an alarm signal from FM broadcast.

Settings in memory

You can store up to 18 stations for FM and 6 stations for AM.

Store a station

While listening to a station...

Press and hold one of the number buttons (1 to 6).

(or)

1 Press and hold the following button until “PRESETMODE” flashes.

KD-X262/KD-X162: Volume knob

KD-X161: * ENTER

2 Perform ‘Select an item (page3 or 4)’ operation to select a preset number.

“MEMORY” appears once the station is stored.

Select a stored station

Press one of the number buttons (1to6).

(or)

1 Press .

2 Perform ‘Select an item (page3 or 4)’ operation to select a preset number.

GETTING STARTED

JS_JVC_KD_X262_E_EN_3.indd 6JS_JVC_KD_X262_E_EN_3.indd 6 8/14/2018 11:35:07 AM8/14/2018 11:35:07 AM

ENGLISH

7

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Other settings

1

Press and hold .

2 Perform ‘Select an item (page3 or 4)’ operation to select an item (see

the following table).

3 Repeat step 2 until the desired item is selected/activated or follow the

instructions stated on the selected item.

4 Press to exit.

To return to the previous setting item, press

.

Default: [XX]

[TUNERSETTING]

[RADIO TIMER]

Turns on the radio at a specific time regardless of the current source.

1

[ONCE]/[DAILY]/[WEEKLY]/[OFF]: Select how often the timer will be

turned on.

2

[FM]/[AM]: Select the source.

3

[01] to [18] (for FM)/[01] to [06] (for AM): Select the preset station.

4

Set the activation day*1 and time.

“



” lights up when complete.

Radio Timer will not activate for the following cases.

• The unit is turned off.

• [OFF] is selected for [AMSRC] in [SOURCESELECT] after Radio Timer for AM

is selected. (Page 5)

[SSM]

[SSM01–06]/[SSM07–12]/[SSM13–18]: Automatically presets up to 18

stations for FM. “SSM” stops flashing when the first 6 stations are stored. Select

[SSM07–12]/[SSM13–18] to store the following 12 stations.

[LOCAL SEEK]

[ON]: Searches only FM stations with good reception. ; [OFF]: Cancels.

• Settings made are applicable only to the selected source/station. Once you

change the source/station, you need to make the settings again.

RADIO

[IF BAND] [AUTO]: Increases the tuner selectivity to reduce interference noises from

adjacent FM stations. (Stereo effect may be lost.) ; [WIDE]: Subjects to

interference noises from adjacent FM stations, but sound quality will not be

degraded and the stereo effect will remain.

[MONO SET]

[ON]: Improves the FM reception, but the stereo effect will be lost. ;

[OFF]: Cancels.

[NEWSSET]*2

[ON]: The unit will temporarily switch to News Programme if available. ;

[OFF]: Cancels.

[REGIONAL]*2

[ON]: Switches to another station only in the specific region using the “AF”

control. ; [OFF]: Cancels.

[AF SET]*2

[ON]: Automatically searches for another station broadcasting the same

program in the same Radio Data System network with better reception when

the current reception is poor. ; [OFF]: Cancels.

[TI]*2

[ON]: Allows the unit to temporarily switch to Traffic Information if available

(“TI” lights up) while listening to all sources except in AM. ; [OFF]: Cancels.

[PTY SEARCH]*2 Select a PTY code (see below).

If there is a station broadcasting a program of the same PTY code as you have

selected, that station is tuned in.

*1 Selectable only when [ONCE] or [WEEKLY] is selected in step 1.

*2 Selectable only when in FM source.

PTY code

[NEWS], [AFFAIRS], [INFO], [SPORT], [EDUCATE], [DRAMA], [CULTURE], [SCIENCE], [VARIED],

[POP M] (music), [ROCK M] (music), [EASY M] (music), [LIGHT M] (music), [CLASSICS],

[OTHER M] (music), [WEATHER], [FINANCE], [CHILDREN], [SOCIAL], [RELIGION], [PHONE IN],

[TRAVEL], [LEISURE], [JAZZ], [COUNTRY], [NATION M] (music), [OLDIES], [FOLK M] (music),

[DOCUMENT]

JS_JVC_KD_X262_E_EN_3.indd 7JS_JVC_KD_X262_E_EN_3.indd 7 8/14/2018 11:35:07 AM8/14/2018 11:35:07 AM

8

ENGLISH

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

USB/iPod/ANDROID

Start playback

The source changes automatically and playback starts.

KD-X262/

KD-X161:

KD-X162:

*1 Do not leave the cable inside the car when not using.

*2 You can control Android device using the Android device itself via other media player

applications installed in the Android device.

Preparation:

You can listen to music from a portable audio player via the auxiliary input

jack.

• Select

[ON]

for

[BUILT-IN AUX]

in

[SOURCESELECT]

. (Page 5)

Start listening

1

Connect a portable audio player (commercially available).

KD-X262/KD-X162:

3.5 mm stereo mini plug with “L” shaped connector

(commercially available)

Portable audio player

Auxiliary input jack

KD-X161:

Auxiliary input jack

3.5 mm stereo mini plug with “L” shaped connector

(commercially available)

Portable audio player

2 Press source button repeatedly to select AUX.

3 Turn on the portable audio player and start playback.

Use a 3-core plug head stereo mini plug for optimum audio

output.

AUX

USB input terminal

USB 2.0 cable*1

(commercially available)

USB cable*1

(commercially available)

Accessory of the iPod/iPhone*1

USB

iPod/iPhone

ANDROID*2

JS_JVC_KD_X262_E_EN_3.indd 8JS_JVC_KD_X262_E_EN_3.indd 8 8/14/2018 11:35:07 AM8/14/2018 11:35:07 AM

ENGLISH

9

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

For key layout on the faceplate, see page 3 or page 4.

Selectable sources:

KD-X262: USB/iPod/ANDROID

KD-X162/KD-X161: USB/ANDROID

• To directly select USB/iPod/ANDROID source, press iPod/USB or USB.

To On the faceplate

Reverse/

Fast-forward*3

Press and hold S / T.

Select a file

Press S / T.

Select a folder*4

Press 2 J / 1 K.

Repeat play*3*5

Press 4  repeatedly.

[TRACK REPEAT]

/

[FOLDER REPEAT]

/

[ALL REPEAT]

: MP3/WMA/WAV/

FLAC file

[ONE REPEAT]

/

[ALL REPEAT]

/

[REPEAT OFF]

: iPod

Random play*3*5

Press 3  repeatedly.

[FOLDERRANDOM]

/

[ALL RANDOM]

/

[RANDOM OFF]

: MP3/WMA/WAV/

FLAC file

[SONG RANDOM]

/

[ALL RANDOM]

/

[RANDOM OFF]

: iPod

*3 Not applicable for ANDROID.

*4 This does not work for iPod/ANDROID.

*5 For iPod: Applicable only when [HEAD MODE] is selected.

USB/iPod/ANDROID

Select music drive

While in USB source, press 5 MODE repeatedly.

Stored songs in the following drive will be played back.

• Selected internal or external memory of a smartphone (Mass

Storage Class).

• Selected drive of a multiple drive device.

Select control mode

While in iPod source, press 5 MODE repeatedly.

[HEAD MODE]

: Control iPod from this unit.

[IPHONE MODE]

: Control iPod using the iPod itself. However, you can

still perform play/pause, file skip, fast-forward or fast-

reverse from this unit.

JS_JVC_KD_X262_E_EN_3.indd 9JS_JVC_KD_X262_E_EN_3.indd 9 8/14/2018 11:35:08 AM8/14/2018 11:35:08 AM

10

ENGLISH

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Select a file from a folder/list

For iPod, applicable only when

[HEAD MODE]

is selected. (Page 9)

1 Press .

2 Perform ‘Select an item (page3 or 4)’ operation to select a

folder/list.

3 Perform ‘Select an item (page3 or 4)’ operation to select a file.

Quick search

(applicable only for USB source)

If you have many files, you can search through them quickly.

Perform the following operation to browse through the list quickly.

KD-X262/KD-X162: Turn the volume knob quickly

KD-X161: Press and hold VOL +/–

Alphabet search

(applicable only for iPod source)

You can search for a file according to the first character.

Press 2 J / 1 K or turn the volume knob quickly to select the desired

character (A to Z, 0to9, OTHERS).

• Select “OTHERS” if the first character is other than A to Z, 0 to 9.

• To return to the previous setting item, press

.

• To cancel, press and hold

.

USB/iPod/ANDROID AUDIO SETTINGS

For key layout on the faceplate, see page 3 or page 4.

Select a preset equalizer directly

(for KD-X262/KD-X162)

Press EQ-BASS repeatedly.

(or)

Press EQ-BASS, then turn the volume knob within 5seconds.

Preset equalizer:

[FLAT]

(default)/

[DRVN3]

/

[DRVN2]

/

[DRVN1]

/

[HARDROCK]

/

[HIPHOP]

/

[JAZZ]

/

[POP]

/

[R&B]

/

[TALK]

/

[USER]

/

[VOCALBOOST]

/

[BASSBOOST]

/

[CLASSICAL]

/

[DANCE]

• Drive equalizer (

[DRVN3]

/

[DRVN2]

/

[DRVN1]

) boosts specific frequencies in

the audio signal to reduce the noise heard from outside the car or running

noise of the tyres.

Select a drive equalizer directly

(for KD-X161)

Drive equalizer boosts specific frequencies in the audio signal to reduce the

noise heard from outside the car or running noise of the tyres.

Press drvn-BASS repeatedly.

Drive equalizer:

[DRVN 3]

(default)/

[DRVN 2]

/

[DRVN 1]

Store your own sound settings

1

Press and hold the following button to enter

[EASY EQ]

setting.

KD-X262/KD-X162: EQ-BASS

KD-X161: drvn-BASS

2 Perform ‘Select an item (page3 or 4)’ operation to make the

setting.

Refer to

[EASYEQ]

(page 11) for setting and the result is stored to

[USER]

.

• To return to the previous setting item, press

.

• Press the following button to exit.

KD-X262/KD-X162: EQ-BASS

KD-X161: drvn-BASS

JS_JVC_KD_X262_E_EN_3.indd 10JS_JVC_KD_X262_E_EN_3.indd 10 8/14/2018 11:35:08 AM8/14/2018 11:35:08 AM

ENGLISH

11

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Other settings

1

Press and hold .

2 Perform ‘Select an item (page3 or 4)’ operation to select an

item (see the following table).

3 Repeat step 2 until the desired item is selected/activated or follow the

instructions stated on the selected item.

4 Press to exit.

To return to the previous setting item, press

.

Default: [XX]

[EQSETTING]

[PRESET EQ]

Selects a preset equalizer suitable to the music genre.

• Select [USER] to use the settings made in [EASYEQ] or [PROEQ].

[FLAT]/[DRVN 3]/[DRVN 2]/[DRVN 1]/[HARD ROCK]/[HIP HOP]/

[JAZZ]/[POP]/[R&B]/[TALK]/[USER]/[VOCALBOOST]/[BASSBOOST]/

[CLASSICAL]/[DANCE]

[EASYEQ]

Adjusts your own sound settings.

• The settings are stored to [USER] in [PRESET EQ].

• The settings made may affect the current settings of [PRO EQ].

[SUB.W SP]*1*2: [00] to [+06] (Default: [+03]

[SUB.W]*1*3: [–08] to [+08] [00]

[BASS]: [LVL–06] to [LVL+06] [LVL00]

[MID]: [LVL–06] to [LVL+06] [LVL00]

[TRE]: [LVL–06] to [LVL+06] [LVL00])

AUDIO SETTINGS

[PRO EQ] Adjusts your own sound settings.

• The settings are stored to [USER] in [PRESET EQ].

• The settings made may affect the current settings of [EASYEQ].

1

[BASS]/[MIDDLE]/[TREBLE]: Select a sound tone.

2

Adjust the sound elements of the selected sound tone.

[BASS] Frequency : [60HZ]/[80HZ]/[100HZ]/[200HZ]

Level : [LVL–06] to [LVL+06]

Q : [Q1.0]/[Q1.25]/[Q1.5]/[Q2.0]

(Default : [80HZ]/[LVL00]/[Q1.0])

[MIDDLE] Frequency : [0.5KHZ]/[1.0KHZ]/[1.5KHZ]/[2.5KHZ]

Level : [LVL–06] to [LVL+06]

Q : [Q0.75]/[Q1.0]/[Q1.25]

(Default : [1.0KHZ]/[LVL00]/[Q1.25])

[TREBLE] Frequency : [10.0KHZ]/[12.5KHZ]/[15.0KHZ]/[17.5KHZ]

Level : [LVL–06] to [LVL+06]

Q : [QFIX]

(Default : [10.0KHZ]/[LVL00]/[QFIX])

[AUDIO CONTROL]

[BASS BOOST]

[LEVEL+01] to [LEVEL+05] ([LEVEL+01]): Selects your preferred bass boost

level. ; [OFF]: Cancels.

[LOUDNESS]

[LEVEL01]/[LEVEL02]: Boosts low or high frequencies to produce a well-

balanced sound at low volume. ; [OFF]: Cancels.

[SUB.W

LEVEL]*1

[SPK-OUT]*2

[SUB.W00] to [SUB.W+06] ([SUB.W+03]): Adjusts the

output level of the subwoofer connected via speaker lead.

(Page 19)

[PRE-OUT]*3

[SUB.W–08] to [SUB.W+08] ([SUB.W00]): Adjusts

the output level of the subwoofer connected to the lineout

terminals (REAR/SW) through an external amplifier.

(Page 19)

*1, *2, *3: (page 12)

JS_JVC_KD_X262_E_EN_3.indd 11JS_JVC_KD_X262_E_EN_3.indd 11 8/14/2018 11:35:08 AM8/14/2018 11:35:08 AM

12

ENGLISH

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

[SUBWOOFER SET]*3 [ON]: Turns on the subwoofer output. ; [OFF]: Cancels.

[SUBWOOFER LPF]*1

[FRQ THROUGH]: All signals are sent to the subwoofer. ;

[FRQ55HZ]/[FRQ85HZ]/[FRQ120HZ]: Audio signals with frequencies

lower than 55 Hz/85 Hz/120 Hz are sent to the subwoofer.

[SUB.W PHASE]*1*4

[REVERSE] (180°)/[NORMAL] (0°): Selects the phase of the subwoofer

output to be in line with the speaker output for optimum performance.

[FADER]

[POSITIONR06] to [POSITIONF06] ([POSITION00]): Adjusts the front

and rear speaker output balance.

[BALANCE]*5

[POSITIONL06] to [POSITIONR06] ([POSITION00]): Adjusts the left

and right speaker output balance.

[VOLUME ADJUST]

[LEVEL–15] to [LEVEL+06] ([LEVEL 00]): Presets the initial volume

level of each source by comparing to the FM volume level. (Before

adjustment, select the source you want to adjust. “VOL ADJ FIX” appears

if FM is selected.)

[AMPGAIN]

[LOWPOWER]: Limits the maximum volume level to 25. (Select if the

maximum power of each speaker is less than 50 W to prevent damaging

the speakers.) ; [HIGHPOWER]: The maximum volume level is 35.

[D.T.EXPANDER]

(Digital Track

Expander)

[ON]: Creates realistic sound by compensating the high-frequency

components and restoring the rise-time of the waveform that are lost in

audio data compression. ; [OFF]: Cancels.

[SPK/PREOUT] Depending on the speaker connection method, select the appropriate

setting for the desired output. (See “Speaker output settings”.)

*1 Displayed only when [SUBWOOFER SET] is set to [ON].

*2 Displayed only when [SPK/PREOUT] is set to [SUB.W/SUB.W].

*3 Displayed only when [SPK/PREOUT] is set to [REAR/SUB.W] or [SUB.W/SUB.W].

*4 Selectable only if a setting other than [FRQTHROUGH] is selected for [SUBWOOFERLPF].

*5 This adjustment will not affect the subwoofer output.

AUDIO SETTINGS

Speaker output settings

[SPK/PRE OUT]

Select the output setting for the speakers

[SPK/PRE OUT]

, based on the speaker

connection method.

Connection via lineout terminals

For connections through an external amplifier. (Page 19)

Setting on

[SPK/PRE OUT]

Audio signal through lineout terminal

REAR/SW

[REAR/REAR] Rear speakers output

[REAR/SUB.W] (default) Subwoofer output

[SUB.W/SUB.W] Subwoofer output

Connection via speaker leads

You can also connect the speakers without using an external amplifier

but still being able to enjoy the subwoofer output with these settings.

(Page 19)

Setting on

[SPK/PRE OUT]

Audio signal through rear speaker lead

L (left) R (right)

[REAR/REAR] Rear speakers output Rear speakers output

[REAR/SUB.W] Rear speakers output Rear speakers output

[SUB.W/SUB.W] Subwoofer output (Mute)

If

[SUB.W/SUB.W]

is selected:

–

[FRQ120HZ]

is selected in

[SUBWOOFERLPF]

and

[FRQTHROUGH]

is not available.

–

[POSITION R01]

is selected in

[FADER]

and selectable range is

[POSITION R06]

to

[POSITION 00]

.

JS_JVC_KD_X262_E_EN_3.indd 12JS_JVC_KD_X262_E_EN_3.indd 12 8/14/2018 11:35:09 AM8/14/2018 11:35:09 AM

ENGLISH

13

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

DISPLAY SETTINGS

Zone identification for brightness settings

Zone identification for color settings

1 Press and hold .

2 Perform ‘Select an item (page3 or 4)’ operation to select an

item (see the following table).

3 Repeat step 2 until the desired item is selected/activated or follow the

instructions stated on the selected item.

4 Press to exit.

To return to the previous setting item, press

.

Default: [XX]

[DISPLAY]

[DIMMER]

Dims the illumination.

[OFF]: Dimmer is turned off. Brightness changes to [DAY] setting.

[ON]: Dimmer is turned on. Brightness changes to [NIGHT] setting.

(See “[BRIGHTNESS]” below.)

[DIMMER TIME]: Set the dimmer on and off time.

1

Perform ‘Select an item (page 3 or 4)’ operation to adjust the [ON]

time.

2

Perform ‘Select an item (page 3 or 4)’ operation to adjust the

[OFF] time.

(Default: [ON]: [18:00] ; [OFF]: [6:00])

[DIMMER AUTO]: Dimmer turns on and off automatically when you turn off

or on the car headlights.*1

[BRIGHTNESS] Sets the brightness for day and night separately.

1

[DAY]/[NIGHT]: Select day or night.

2

Select a zone. (See the illustration on the left column.)

3

[LEVEL00] to [LEVEL31]: Set the brightness level.

[TEXT SCROLL]*2

[SCROLL ONCE]: Scrolls the display information once. ;

[SCROLL AUTO]: Repeats scrolling at 5-second intervals. ;

[SCROLL OFF]: Cancels.

*1 The illumination control wire connection is required. (Page 19)

*2 Some characters or symbols will not be shown correctly (or will be blank).

KD-X161:

KD-X262/

KD-X162:

KD-X161:

Symbolic button

(Symbolic button)

JS_JVC_KD_X262_E_EN_3.indd 13JS_JVC_KD_X262_E_EN_3.indd 13 8/14/2018 11:35:09 AM8/14/2018 11:35:09 AM

14

ENGLISH

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

DISPLAY SETTINGS

[COLOR] (for KD-X161: Symbolic button only)

[PRESET] Selects an illumination color for the symbolic button. (See the illustration

on page 13.)

• [COLOR01] to [COLOR49]

• [USER]: The color you have created for [DAYCOLOR] or [NIGHTCOLOR]

is shown.

• [COLORFLOW01] to [COLORFLOW03]: Color changes at different

speeds.

• Preset color: [CRYSTAL]/[FLOWER]/[FOREST]/[GRADATION]/[OCEAN]/

[RELAX]/[SUNSET]

[DAYCOLOR] Stores your own day and night illumination colors for the symbolic button.

1

[RED]/[GREEN]/[BLUE]: Select a primary color.

2

[00] to [31]: Select the level.

Repeat steps 1 and 2 for all the primary colors.

• Your setting is stored to [USER] in [PRESET].

• [NIGHTCOLOR] or [DAYCOLOR] is changed by turning on or off your

car’s headlights.

[NIGHTCOLOR]

[MENUCOLOR]

[ON]: The illumination color of the symbolic button changes to white color

when settings are performed on menu and list search, except in color setting

mode. ; [OFF]: Cancels.

REFERENCES

Maintenance

Cleaning the unit

Wipe off dirt on the faceplate with a dry silicone or soft cloth.

Cleaning the connector

Detach the faceplate and clean the connector gently

with a cotton swab. Be careful not to damage the

connector.

More information

For: – Latest firmware updates and latest compatible item list

– Any other latest information

Visit <www.jvc.net/cs/car/>.

Playable files

• Playable audio file for USB mass storage class device:

MP3 (.mp3), WMA (.wma), WAV (.wav), FLAC (.flac)

• Playable USB device file system: FAT12, FAT16, FAT32

Even when audio files comply with the standards listed above, playback may be impossible

depending on the types or conditions of media or devices.

• For detailed information and notes about the playable audio files, visit

<www.jvc.net/cs/car/audiofile/>.

About USB devices

• You cannot connect a USB device via a USB hub.

• Connecting a cable whose total length is longer than 5 m may result in abnormal playback.

• This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1 A.

Connector (on the reverse

side of the faceplate)

JS_JVC_KD_X262_E_EN_3.indd 14JS_JVC_KD_X262_E_EN_3.indd 14 8/14/2018 11:35:09 AM8/14/2018 11:35:09 AM

ENGLISH

15

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

REFERENCES

About iPod/iPhone

Made for

– iPod touch (5th and 6th generation)

– iPod nano (7th generation)

– iPhone 4S, 5, 5S, 5C, 6, 6 Plus, 6S, 6S Plus, SE, 7, 7 Plus, 8, 8 Plus, X

• It is not possible to browse video files on the “Videos” menu in [HEAD MODE].

• The song order displayed on the selection menu of this unit may differ from that of the iPod/

iPhone.

• You cannot operate iPod if “JVC” or “

” is displayed on iPod.

• Depending on the version of the operating system of the iPod/iPhone, some functions may not

operate on this unit.

About Android device

• This unit supports Android OS 4.1 and later.

• Some Android devices (with OS 4.1 and later) may not fully support Android Open Accessory

(AOA) 2.0.

• If the Android device supports both mass storage class device and AOA 2.0, this unit always

play back via AOA 2.0 as priority.

Change the display information

Each time you press

, the display information changes.

• If the information is unavailable or not recorded, “NO TEXT”, “NO NAME”, or other information

(eg. station name) appears or display will be blank.

Main display

Source name Display information: Main

FM or AM Frequency

Clock back to the beginning

For FM Radio Data System stations only:

Station name/Program type

Radio text Radio text+

Radio text+ song title/Radio text+ artist

Frequency Clock

back to the beginning

USB For MP3/WMA/WAV/FLAC files:

Song title/Artist

Album title/Artist Folder name File name

Playing time

Clock back to the beginning

iPod USB When [HEAD MODE] is selected (page 9):

Song title/Artist

Album title/Artist Playing time Clock

back to the beginning

ANDROID Source name

Clock back to the beginning

AUX Source name

Clock back to the beginning

Available Cyrillic letters

Available characters

Display indications

JS_JVC_KD_X262_E_EN_3.indd 15JS_JVC_KD_X262_E_EN_3.indd 15 8/14/2018 11:35:10 AM8/14/2018 11:35:10 AM

16

ENGLISH

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Symptom Remedy

General

Sound cannot be heard. • Adjust the volume to the optimum level.

• Check the cords and connections.

“MISWIRING CHECK WIRING

THEN PWR ON” appears.

Turn the power off, then check to be sure the terminals of

the speaker wires are insulated properly. Turn the power

on again.

“PROTECTING SEND SERVICE”

appears.

Send the unit to the nearest service center.

Source cannot be selected. Check the [SOURCESELECT] setting. (Page 5)

The unit does not work at all. Reset the unit. (Page 3 or 4)

Correct characters are not

displayed.

• This unit can only display uppercase letters, numbers,

and a limited number of symbols.

• Depending on the display language you have selected

(page 6), some characters may not be displayed

correctly.

Radio

• Radio reception is poor.

• Static noise while listening

to the radio.

Connect the antenna firmly.

USB/iPod

Playback order is not as

intended.

The playback order is determined by the file name (USB).

Elapsed playing time is not

correct.

This depends on the recording process earlier (USB).

“NOT SUPPORT” appears and

track skips.

Check whether the track is a playable format.

(Page 14, 15)

“READING” keeps flashing. • Do not use too many hierarchical levels and folders.

• Reattach the device (USB/iPod/iPhone).

TROUBLESHOOTING

Symptom Remedy

USB/iPod

“CANNOT PLAY” flashes and/

or connected device cannot

be detected

• Check whether the connected device is compatible with

this unit and ensure the files are in supported formats.

(Page 14, 15)

• Reattach the device.

The iPod/iPhone does not

turn on or does not work.

• Check the connection between this unit and iPod/iPhone.

• Disconnect and reset the iPod/iPhone using hard reset.

“NO DEVICE” Connect a device (USB/iPod/iPhone), and change the

source to USB/iPod/iPhone again.

ANDROID

• Sound cannot be heard

during playback.

• Sound output only from

the Android device.

• Reconnect the Android device.

• Launch any media player application on the Android

device and start playback.

• Relaunch the current media player application or use

another media player application.

• Restart the Android device.

• If this does not solve the problem, the connected Android

device is unable to route the audio signal to unit.

(Page 15)

• If USB connection does not work, connect the Android

device through auxiliary input jack.

“NO DEVICE” or “READING”

keeps flashing.

• Reconnect the Android device.

• If USB connection does not work, connect the Android

device through auxiliary input jack.

Playback is intermittent or

sound skips.

Turn off the power saving mode on the Android device.

“CANNOT PLAY” • Make sure Android device contains playable audio files.

• Reconnect the Android device.

• Restart the Android device.

If you still have troubles, reset the unit. (Page3 or 4)

JS_JVC_KD_X262_E_EN_3.indd 16JS_JVC_KD_X262_E_EN_3.indd 16 8/14/2018 11:35:13 AM8/14/2018 11:35:13 AM

La pagina sta caricando ...

JVC KD-X162 Manuale del proprietario

Questo manuale è adatto anche per

JVC KD-X162 Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti