JVC KD-X272BT Manuale del proprietario

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

ENGLISH

ESPAÑOL

NEDERLANDS

PORTUGUÊS

DEUTSCH

FRANÇAIS

ITALIANO

РУCCKИЙ

B5K-0664-20 [E]

DIGITAL MEDIA RECEIVER

Quick Start Guide

RECEPTOR DE MEDIOS DIGITALES

Guía de inicio rápido

DIGITALE MEDIAONTVANGER

Snelstartgids

RECEPTOR MÉDIA DIGITAL

Guia de Início Rápido

DIGITAL-MEDIA-RECEIVER

Schnellstartanleitung

RÉCEPTEUR MULTIMÉDIA NUMÉRIQUE

Guide de démarrage rapide

RICEVITORE MULTIMEDIALE DIGITALE

Guida di avvio rapido

ЦИФРОВОЙ МЕДИА-РЕСИВЕР

Краткое руководство по началу работы

KD-X372BT / KD-X272BT

For detailed operations and information, refer to the INSTRUCTION MANUAL on the following

website:

Para obtener más información y detalles sobre las operaciones, consulte el MANUAL DE

INSTRUCCIONES en el siguiente sitio web:

Raadpleeg de GEBRUIKSAANWIJZING op de volgende website voor gedetailleerde informatie over

de bediening:

Para as operações e informações detalhadas, consulte o MANUAL DE INSTRUÇÕES no website

abaixo:

Für detaillierte Bedienungen und Informationen siehe BEDIENUNGSANLEITUNG auf der folgenden

Website:

Pour les opérations et les informations détaillées, reportez-vous au MANUEL D’INSTRUCTIONS sur

le site web suivant.

Per le operazioni e le informazioni dettagliate, fare riferimento al ISTRUZIONI PER L’USO nel

seguente sito web:

За подробными инструкциями по управлению и информацией обращайтесь к ИHCTPУKЦИИ

ПO ЭKCПЛУATAЦИИ на следующем веб-сайте:

<http://www.jvc.net/cs/car/>

JS_JVC_QSG_KD_X372BT_E_C20.indd 1JS_JVC_QSG_KD_X372BT_E_C20.indd 1 10/8/2019 10:50:01 AM10/8/2019 10:50:01 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

i

Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable

for countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste.

Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling

these items and their waste byproducts.

Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and

waste disposal will help conserve resources whilst preventing detrimental effects on our health and the

environment.

Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead.

Información acerca de la eliminación de equipos eléctricos, electrónicos y baterías al final de

la vida útil (aplicable a los países que hayan adoptado sistemas independientes de recogida

de residuos)

Los productos y las baterías con el símbolo de un contenedor con ruedas tachado no podrán ser desechados

como residuos domésticos.

Los equipos eléctricos, electrónicos y baterías al final de la vida útil, deberán ser reciclados en

instalaciones que puedan dar el tratamiento adecuado a estos productos y a sus subproductos residuales

correspondientes.

Póngase en contacto con su administración local para obtener información sobre el punto de recogida más

cercano. Un tratamiento correcto del reciclaje y la eliminación de residuos ayuda a conservar los recursos y

evita al mismo tiempo efectos perjudiciales en la salud y el medio ambiente.

Nota: El símbolo “Pb” debajo del (contenedor con ruedas tachado) en baterías indica que dicha batería

contiene plomo.

Informatie over het weggooien van elektrische en elektronische apparatuur en batterijen

(particulieren)

Dit symbool geeft aan dat gebruikte elektrische, elektronische producten en batterijen niet bij het normale

huishoudelijke afval mogen.

Lever deze producten in bij de aangewezen inzamelingspunten, waar ze gratis worden geaccepteerd en op

de juiste manier worden verwerkt, teruggewonnen en hergebruikt.

Voor inleveradressen zie www.nvmp.nl, www.ictmilieu.nl, www.stibat.nl. Wanneer u dit product op de

juiste manier als afval inlevert, spaart u waardevolle hulpbronnen en voorkomt u potentiële negatieve

gevolgen voor de volksgezondheid en het milieu, die anders kunnen ontstaan door een onjuiste verwerking

van afval.

Opgelet: Het teken “Pb” onder het teken van de batterijen geeft aan dat deze batterij lood bevat.

Informação sobre a forma de deitar fora Velho Equipamento Eléctrico, Electrónico e baterias

(aplicável nos países que adotaram sistemas de recolha de lixos separados)

Produtos e baterias com o símbolo (caixote do lixo com um X) não podem ser deitados fora junto com o

lixo doméstico.

Equipamentos velhos eléctricos, electrónicos e baterias deverão ser reciclados num local capaz de o fazer

bem assim como os seus subprodutos.

Contacte as autoridades locais para se informar de um local de reciclagem próximo de si. Reciclagem e

tratamento de lixo correctos ajudam a poupar recursos e previnem efeitos prejudiciais na nossa saúde e

no ambiente.

Note: o símbolo “Pb” abaixo do símbolo em baterias indica que esta bateria contém chumbo.

Entsorgung von gebrauchten elektrischen und elektronischen Geräten und Batterien

(anzuwenden in Ländern mit einem separaten Sammelsystem für solche Geräte)

Das Symbol (durchgestrichene Mülltonne) auf dem Produkt oder seiner Verpackung weist darauf hin, dass

dieses Produkt nicht als normaler Haushaltsabfall behandelt werden darf, sondern an einer Annahmestelle

für das Recycling von elektrischen und elektronischen Geräten und batterien abgegeben werden muss.

Durch Ihren Beitrag zur korrekten Entsorgung dieses Produktes schützen Sie die Umwelt und die

Gesundheit Ihrer Mitmenschen.

Unsachgemässe oder falsche Entsorgung gefährden Umwelt und Gesundheit. Weitere Informationen

über das Recycling dieses Produktes erhalten Sie von Ihrer Gemeinde oder den kommunalen

Entsorgungsbetrieben.

Achtung: Das Zeichen „Pb“ unter dem Symbol fur Batterien zeigt an, dass diese Batterie Blei enthalt.

JS_JVC_QSG_KD_X372BT_E_C.indd iJS_JVC_QSG_KD_X372BT_E_C.indd i 3/7/2019 1:51:35 PM3/7/2019 1:51:35 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

ii

Information sur l’élimination des anciens équipements électriques et électroniques et piles

électriques (applicable dans les pays qui ont adopté des systèmes de collecte sélective)

Les produits et piles électriques sur lesquels le pictogramme (poubelle barrée) est apposé ne peuvent pas

être éliminés comme ordures ménagères.

Les anciens équipements électriques et électroniques et piles électriques doivent être recyclés sur des sites

capables de traiter ces produits et leurs déchets.

Contactez vos autorités locales pour connaître le site de recyclage le plus proche. Un recyclage adapté et

l’élimination des déchets aideront à conserver les ressources et à nous préserver des leurs effets nocifs sur

notre santé et sur l’environnement.

Remarque: Le symbole “Pb“ ci-dessous sur des piles électrique indique que cette pile contient du plomb.

Informazioni sullo smaltimento delle vecchie apparecchiature elettriche ed elettroniche e

delle batterie (valide per i paesi che hanno adottato sistemi di raccolta differenziata)

I prodotti e le batterie recanti il simbolo di un cassonetto della spazzatura su ruote barrato non possono

essere smaltiti insieme ai normali rifiuti di casa.

I vecchi prodotti elettrici ed elettronici e le batterie devono essere riciclati presso un'apposita struttura in

grado di trattare questi prodotti e di smaltirne i loro componenti.

Per conoscere dove e come recapitare tali prodotti nel luogo a voi più vicino, contattare l'apposito ufficio

comunale. Un appropriato riciclo e smaltimento aiuta a conservare la natura e a prevenire effetti nocivi alla

salute e all'ambiente.

Nota: Il simbolo “Pb” sotto al simbolo delle batterie indica che questa batteria contiene piombo.

Дата изготовления (месяц/год) находится на этикетке устройства.

В соответствии с Законом Российской Федерации “О защите прав потребителей” срок службы

(годности) данного товара “по истечении которого он может представлять опасность для жизни,

здоровья потребителя, причинять вред его имуществу или окружающей среде” составляет семь (7)

лет со дня производства.

Дополнительные косметические материалы к данному товару, поставляемые вместе с ним, могут

храниться в течение двух (2) лет со дня его производства.

Срок службы (годности), кроме срока хранения дополнительных косметических материалов,

упомянутых в предыдущих двух пунктах, не затрагивает никаких других прав потребителя, в

частности, гарантийного обслуживания JVC, которое он может получить в соответствии с законом о

правах потребителя или других законов, связанных с ним.

Условия хранения:

Температура: от –30°C до +85°C

Влажность: от 0% до 90%

For Israel

JS_JVC_QSG_KD_X372BT_E_C.indd iiJS_JVC_QSG_KD_X372BT_E_C.indd ii 3/7/2019 1:51:35 PM3/7/2019 1:51:35 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

iii

SOFTWARE LICENSE AGREEMENT

The software embedded in the Product (hereinafter the "Licensed Software") provided by Licensor is

copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions

which Users shall follow in order to use the Licensed Software.

The User shall use the Licensed Software by agreeing with the terms of this Software License Agreement.

This Agreement shall be deemed completed at the time the User (hereinafter the "User") initially used the

Product in which the "Licensed Software" is embedded.

The Licensed Software may include the software which has been licensed to the Licensor directly or

indirectly from any third party. In such case, some third parties require the Users to follow their conditions

for use separately from this Software License Agreement. Such software shall not be subject to this

Agreement, and the Users are urged to read the "Important Notice concerning the Software" to be provided

separately below.

Article 1 General Provision

The Licensor shall grant to the User a non-exclusive and non-transferable (other than the exceptional case

referred to in Article 3, Paragraph 1) licensed to use the Licensed Software within the country of the User.

(the country where the User bought the Product (hereinafter the "Country")

Article 2 License

1. The license granted under this Agreement shall be the right to use the Licensed Software in the

Product.

2. The User shall not duplicate, copy, modify, add, translate or otherwise alter, or lease the Licensed

Software and any related documents, whether in whole or in part.

3. The use of the Licensed Software shall be limited to personal purpose, and the Licensed Software shall

not be distributed, licensed or sub-licensed whether it is for commercial purpose or not.

4. The User shall use the Licensed Software according to the directions described in the operation

manual or help file, and is prohibited to use or duplicate any data in a manner violating the Copyright

Law or any other laws and regulations by applying whole or a part of the Licensed Software.

Article 3 Conditions for Grant of License

1. When the User transfers the Product, it may also transfer the license to use the Licensed Software

embedded in the Product (including any related materials, updates and upgrades) on condition that

no original, copies or related materials continue in the possession of the User, and that the User shall

cause the transferee to comply with this Software License Agreement.

2. The User shall not carry out reverse engineering, disassembling, decompiling or any other code

analysis works in connection with the Licensed Software.

Article 4 Right pertaining to the Licensed Software

Any and all copyrights and other rights pertaining to the Licensed Software and related documents

shall belong to the Licensor or the original holder of the right who granted to the Licensor the license or

sublicense for the Licensed Software (hereinafter the "Original Rightholder"), and the User shall not be

entitled to any right other than the license granted hereunder, in respect of the Licensed Software and any

related documents.

Article 5 Indemnification of Licensor

1. Neither the Licensor nor the Original Rightholder shall be liable for any damage incurred by the User

or any third party due to the exercise of the license granted to the User under this Agreement, unless

otherwise restricted by law.

2. The Licensor will offer no guarantee for the merchantability, convertibility and consistency with

certain objective of the Licensed Software.

Article 6 Liability to Third Party

If any dispute has arisen with any third party due to an infringement upon a copyright, patent or any

other intellectual property right that was caused by the User's use of the Licensed Software, the User shall

settle such dispute at its own cost and hold the Licensor and the Original Rightholder harmless from any

inconvenience it may cause.

Article 7 Confidentiality

The User shall keep the confidentiality of such portion of the Licensed Software, related documents thereof

or any other information to be granted under this Agreement, as well as the conditions of this Agreement

as has not yet entered the public domain, and shall not disclose or divulge the same to any third party

without approval of the Licensor.

Article 8 Termination

In case the User falls under any of the events described in the following items, the Licensor may

immediately terminate this Agreement or claim that the User compensates for the damage incurred by the

Licensor due to such event:

(1) when the User violated any provision of this Agreement; or

(2) when a petition has been filed against the User for an attachment, provisional attachment,

provisional disposition or any other compulsory execution.

JS_JVC_QSG_KD_X372BT_E_C.indd iiiJS_JVC_QSG_KD_X372BT_E_C.indd iii 3/7/2019 1:51:35 PM3/7/2019 1:51:35 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

iv

Article 9 Destruction of the Licensed Software

If this Agreement is terminated pursuant to the provision of Article 8, the User shall destroy the Licensed

Software, any related documents and copies thereof within two (2) weeks from such date of termination.

Article 10 Protection of Copyright

1. The copyright and all the other intellectual property rights relating to the Licensed Software

shall belong to the Licensor and the Original Rightholder, and in no event shall they be under the

ownership of the User.

2. The User shall, whenever it uses the Licensed Software, comply with any laws relating to the

copyright and other intellectual property rights.

Article 11 Export Restriction

1. It is prohibited to export the Licensed Software and any related documents outside the country

of the User (including transmission thereof outside the country of the User via Internet of other

communication tools).

2. The User shall understand that the Licensed Software shall be subject to the export restrictions

adopted by the country of User and any other countries.

3. The User shall agree that the software will be subject to any and all applicable international and

domestic laws (including the export control regulation of the country of User and any other countries,

and any restrictions concerning the end-users, the use by end-users and importing countries to be

provided by the country of User and any other countries, and any other governmental authorities).

Article 12 Miscellaneous

1. In the event any part of this Agreement is invalidated by operation of law, the residual provisions

shall continue in force.

2. Matters not stipulated in this Agreement or any ambiguity or question raised in the construction of

this Agreement shall be provided or settled upon good-faith consultation between the Licensor and

the User.

3. The Licensor and the User hereby agree that this Agreement is governed by the laws of Japan, and

any dispute arising from, and relating to the rights and obligations under, this Agreement shall be

submitted to the exclusive jurisdiction of the Tokyo District Court for its first instance.

Important Notice concerning the Software

-jansson

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated

documentation files (the "Software"), to deal in the Software without restriction, including without

limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the

Software, and to permit persons to whom the Software is furnished to do so, subject to the following

conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions

of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING

BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE

AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY

CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,

ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE

SOFTWARE.

-cJSON

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated

documentation files (the "Software"), to deal in the Software without restriction, including without

limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the

Software, and to permit persons to whom the Software is furnished to do so, subject to the following

conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions

of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING

BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE

AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY

CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,

ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE

SOFTWARE.

JS_JVC_QSG_KD_X372BT_E_C20.indd ivJS_JVC_QSG_KD_X372BT_E_C20.indd iv 10/8/2019 10:50:18 AM10/8/2019 10:50:18 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

v

-CMP

The MIT License (MIT)

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated

documentation files (the "Software"), to deal in the Software without restriction, including without

limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the

Software, and to permit persons to whom the Software is furnished to do so, subject to the following

conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions

of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING

BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE

AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY

CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,

ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE

SOFTWARE.

nanopb

This software is provided 'as-is', without any express or implied warranty. In no event will the authors be

held liable for any damages arising from the use of this software.

Permission is granted to anyone to use this software for any purpose, including commercial applications,

and to alter it and redistribute it freely, subject to the following restrictions:

1. The origin of this software must not be misrepresented; you must not claim that you wrote

the original software. If you use this software in a product, an acknowledgment in the product

documentation would be appreciated but is not required.

2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the

original software.

3. This notice may not be removed or altered from any source distribution.

sha2

AUTHOR: Aaron D. Gifford - http://www.aarongifford.com/

You may obtain a copy of the license at

https://opensource.org/licenses/BSD-3-Clause

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING

BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE

AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY

CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,

ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE

SOFTWARE.

Posix

Redistribution and use in source and binary forms, with or without modification, are permitted provided

that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the

following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and

the following disclaimer in the documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following

acknowledgement:

This product includes software developed by the University of California, Berkeley and its contributors.

4. Neither the name of the University nor the names of its contributors may be used to endorse or

promote products derived from this software without specific prior written permission.

Developed at SunPro, a Sun Microsystems, Inc. business.

Permission to use, copy, modify, and distribute this software is freely granted, provided that this notice is

preserved.

License to copy and use this software is granted provided that it is identified as the “RSA Data Security, Inc.

MD4 Message-Digest Algorithm” in all material mentioning or referencing this software or this function.

JS_JVC_QSG_KD_X372BT_E_C20.indd vJS_JVC_QSG_KD_X372BT_E_C20.indd v 10/8/2019 10:50:20 AM10/8/2019 10:50:20 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

vi

Author: Chris G. Demetriou

Permission to use, copy, modify and distribute this software and its documentation is hereby granted,

provided that both the copyright notice and this permission notice appear in all copies of the software,

derivative works or modified versions, and any portions thereof, and that both notices appear in supporting

documentation.

CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS “AS IS” CONDITION. CARNEGIE MELLON

DISCLAIMS ANY LIABILITY OF ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF

THIS SOFTWARE.

Carnegie Mellon requests users of this software to return to

Software Distribution Coordinator or Software.Distribution@

CS.CMU.EDU

School of Computer Science

Carnegie Mellon University

Pittsburgh PA 15213-3890

any improvements or extensions that they make and grant Carnegie the rights to redistribute these

changes.

License is also granted to make and use derivative works provided that such works are identified as

“derived from the RSA Data Security, Inc. MD4 Message-Digest Algorithm” in all material mentioning or

referencing the derived work.

RSA Data Security, Inc. makes no representations concerning either the merchantability of this software or

the suitability of this software for any particular purpose. It is provided “as is” without express or implied

warranty of any kind.

You may redistribute unmodified or modified versions of this source code provided that the above

copyright notice and this and the following conditions are retained.

This software is provided “as is”, and comes with no warranties of any kind. I shall in no event be liable for

anything that happens to anyone/anything when using this software.

These notices must be retained in any copies of any part of this documentation and/or software.

T-Kernel 2.0

This product uses the source code of T-Kernel 2.0 under T-License 2.0 granted by T-Engine Forum

(www.tron.org)

BSD-3-Clause

You may obtain a copy of the license at

https://opensource.org/licenses/BSD-3-Clause

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING

BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,

DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,

OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

LFS Subsystem

You may obtain a copy of the license at

https://directory.fsf.org/wiki/License:BSD-4-Clause

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING

BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,

DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,

OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Accordo2 Player

Apache License

Licensed under the Apache License,

Version 2.0, January 2004(the “License”);

You may obtain a copy of the license at

http://www.apache.org/licenses/LICENSE-2.0

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING

BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,

DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,

OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

JS_JVC_QSG_KD_X372BT_E_C20.indd viJS_JVC_QSG_KD_X372BT_E_C20.indd vi 10/8/2019 10:50:20 AM10/8/2019 10:50:20 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

vii

Declaration of Conformity with regard to the RE Directive 2014/53/EU

Declaration of Conformity with regard to the RoHS Directive 2011/65/EU

Manufacturer:

JVCKENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

EU Representative:

JVCKENWOOD Europe B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS

Declaración de conformidad con respecto a la Directiva RE 2014/53/EU

Declaración de conformidad con respecto a la Directiva RoHS 2011/65/EU

Fabricante:

JVCKENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

Representante en la UE:

JVCKENWOOD Europe B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS

Conformiteitsverklaring met betrekking tot de RE-richtlijn van de Europese Unie (2014/53/EU)

Conformiteitsverklaring met betrekking tot de RoHS richtlijn van de Europese Unie (2011/65/EU)

Fabrikant:

JVCKENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

EU-vertegenwoordiger:

JVCKENWOOD Europe B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS

Declaração de conformidade relativa à Directiva RE 2014/53/EU

Declaração de conformidade relativa à Directiva RoHS 2011/65/EU

Fabricante:

JVCKENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

Representante na UE:

JVCKENWOOD Europe B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS

Konformitätserklärung in Bezug auf die RE-Vorschrift 2014/53/EU

Konformitätserklärung in Bezug auf die RoHS-Vorschrift 2011/65/EU

Hersteller:

JVCKENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

EU-Vertreter:

JVCKENWOOD Europe B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS

Déclaration de conformité se rapportant à la directive RE 2014/53/EU

Déclaration de conformité se rapportant à la directive RoHS 2011/65/EU

Fabricant:

JVCKENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

Représentants dans l’UE:

JVCKENWOOD Europe B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS

Dichiarazione di conformità alla Direttiva RE 2014/53/EU

Dichiarazione di conformità relativa alla direttiva RoHS 2011/65/EU

Produttore:

JVCKENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

Rappresentante UE:

JVCKENWOOD Europe B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS

Декларация соответствия относительно Директивы RE 2014/53/EU

Декларация соответствия относительно Директивы RoHS 2011/65/EU

Производитель:

JVCKENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

Представительство в ЕС:

JVCKENWOOD Europe B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS

JS_JVC_QSG_KD_X372BT_E_C20.indd viiJS_JVC_QSG_KD_X372BT_E_C20.indd vii 10/8/2019 10:50:20 AM10/8/2019 10:50:20 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

viii

English

Hereby, JVCKENWOOD declares that the radio

equipment “KD-X372BT/KD-X272BT” is in

compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is

available at the following internet address:

http://www.jvc.net/cs/car/eudoc/

Français

Par la présente, JVCKENWOOD déclare que

l’équipement radio « KD-X372BT/KD-X272BT » est

conforme à la directive 2014/53/UE.

L’intégralité de la déclaration de conformité UE est

disponible à l’adresse Internet suivante :

http://www.jvc.net/cs/car/eudoc/

Deutsch

Hiermit erklärt JVCKENWOOD, dass das Funkgerät

“KD-X372BT/KD-X272BT” der Richtlinie

2014/53/EU entspricht.

Der volle Text der EU-Konformitätserklärung

steht unter der folgenden Internetadresse zur

Verfügung:

http://www.jvc.net/cs/car/eudoc/

Nederlands

Hierbij verklaart JVCKENWOOD dat de

radioapparatuur “KD-X372BT/KD-X272BT” in

overeenstemming is met Richtlijn 2014/53/EU.

De volledige tekst van de EU-verklaring van

overeenstemming is te vinden op het volgende

internetadres:

http://www.jvc.net/cs/car/eudoc/

Italiano

Con la presente, JVCKENWOOD dichiara che

l΄apparecchio radio “KD-X372BT/KD-X272BT” è

conforme alla Direttiva 2014/53/UE.

Il testo integrale della dichiarazione di conformità

UE è disponibile al seguente indirizzo internet:

http://www.jvc.net/cs/car/eudoc/

Español

Por la presente, JVCKENWOOD declara que el

equipo de radio “KD-X372BT/KD-X272BT” cumple

la Directiva 2014/53/EU.

El texto completo de la declaración de

conformidad con la UE está disponible en la

siguiente dirección de internet:

http://www.jvc.net/cs/car/eudoc/

Português

Deste modo, a JVCKENWOOD declara que o

equipamento de rádio “KD-X372BT/KD-X272BT”

está em conformidade com a Diretiva 2014/53/UE.

O texto integral da declaração de conformidade

da UE está disponível no seguinte endereço de

internet:

http://www.jvc.net/cs/car/eudoc/

Polska

Niniejszym, JVCKENWOOD deklaruje, że sprzęt

radiowy “KD-X372BT/KD-X272BT” jest zgodny z

dyrektywą 2014/53/UE.

Pełny tekst deklaracji zgodności EU jest dostępny

pod adresem:

http://www.jvc.net/cs/car/eudoc/

Český

Společnost JVCKENWOOD tímto prohlašuje, že

rádiové zařízení “KD-X372BT/KD-X272BT” splňuje

podmínky směrnice 2014/53/EU.

Plný text EU prohlášení o shodě je dostupný na

následující internetové adrese:

http://www.jvc.net/cs/car/eudoc/

Magyar

JVCKENWOOD ezennel kijelenti, hogy a

„KD-X372BT/KD-X272BT“ rádióberendezés

megfelel a 2014/53/EU irányelvnek.

Az EU konformitási nyilatkozat teljes szövege az

alábbi weboldalon érhető el:

http://www.jvc.net/cs/car/eudoc/

Svenska

Härmed försäkrar JVCKENWOOD att

radioutrustningen “KD-X372BT/KD-X272BT” är i

enlighet med direktiv 2014/53/EU.

Den fullständiga texten av EU-försäkran

om överensstämmelse finns på följande

Internetadress :

http://www.jvc.net/cs/car/eudoc/

Suomi

JVCKENWOOD julistaa täten, että radiolaite

“KD-X372BT/KD-X272BT” on direktiivin

2014/53/EU mukainen.

EU-vaatimustenmukaisuusvakuutusvaatimus

löytyy kokonaisuudessaan seuraavasta internet-

osoitteesta:

http://www.jvc.net/cs/car/eudoc/

Slovensko

S tem JVCKENWOOD izjavlja, da je radijska oprema

»KD-X372BT/KD-X272BT« v skladu z Direktivo

2014/53/EU.

Celotno besedilo direktive EU o skladnosti je

dostopno na tem spletnem naslovu:

http://www.jvc.net/cs/car/eudoc/

Slovensky

Spoločnosť JVCKENWOOD týmto vyhlasuje, že

rádiové zariadenie „KD-X372BT/KD-X272BT“

vyhovuje smernici 2014/53/EÚ.

Celý text EÚ vyhlásenia o zhode nájdete na

nasledovnej internetovej adrese:

http://www.jvc.net/cs/car/eudoc/

Dansk

Herved erklærer JVCKENWOOD, at radioudstyret

“KD-X372BT/KD-X272BT” er i overensstemmelse

med Direktiv 2014/53/EU.

EU-overensstemmelseserklæringens fulde ordlyd

er tilgængelig på følgende internetadresse:

http://www.jvc.net/cs/car/eudoc/

Ελληνικά

Με το παρόν, η JVCKENWOOD δηλώνει ότι ο

ραδιοεξοπλισμός «KD-X372BT/KD-X272BT»

συμμορφώνεται με την Οδηγία 2014/53/ΕΕ.

Το πλήρες κείμενο της δήλωσης συμμόρφωσης

της ΕΕ είναι διαθέσιμο στην ακόλουθη διεύθυνση

στο διαδίκτυο:

http://www.jvc.net/cs/car/eudoc/

JS_JVC_QSG_KD_X372BT_E_C20.indd viiiJS_JVC_QSG_KD_X372BT_E_C20.indd viii 10/8/2019 10:50:20 AM10/8/2019 10:50:20 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

ix

Eesti

Käesolevaga JVCKENWOOD kinnitab, et

„KD-X372BT/KD-X272BT“ raadiovarustus on

vastavuses direktiiviga 2014/53/EL.

ELi vastavusdeklaratsiooni terviktekst on

kättesaadav järgmisel internetiaadressil:

http://www.jvc.net/cs/car/eudoc/

Latviešu

JVCKENWOOD ar šo deklarē, ka radio aparatūra

„KD-X372BT/KD-X272BT” atbilst direktīvas

2014/53/ES prasībām.

Pilns ES atbilstības deklarācijas teksts ir pieejams

šādā tīmekļa adresē:

http://www.jvc.net/cs/car/eudoc/

Lietuviškai

Šiuo JVCKENWOOD pažymi, kad radijo įranga

„KD-X372BT/KD-X272BT“ atitinka 2014/53/EB

direktyvos reikalavimus.

Visą EB direktyvos atitikties deklaracijos tekstą

galite rasti šiuo internetiniu adresu:

http://www.jvc.net/cs/car/eudoc/

Malti

B’dan, JVCKENWOOD jiddikjara li t-tagħmir tar-

radju “KD-X372BT/KD-X272BT” huwa konformi

mad-Direttiva 2014/53/UE.

It-test kollu tad-dikjarazzjoni ta’ konformità huwa

disponibbli fl-indirizz intranet li ġej:

http://www.jvc.net/cs/car/eudoc/

HRVATSKI / SRPSKI JEZIK

JVCKENWOOD ovim izjavljuje da je radio oprema

“KD-X372BT/KD-X272BT” u skladu s Direktivom

2014/53/EU.

Cjeloviti tekst deklaracije Europske unije o

usklađenosti dostupan je na sljedećoj internet

adresi:

http://www.jvc.net/cs/car/eudoc/

ROMÂNĂ

Prin prezenta, JVCKENWOOD declară că

echipamentul radio “KD-X372BT/KD-X272BT” este

în conformitate cu Directiva 2014/53/UE.

Textul integral al declarației de conformitate UE este

disponibil la urmatoarea adresă de internet:

http://www.jvc.net/cs/car/eudoc/

БЪЛГАРСКИ

С настоящото JVCKENWOOD декларира, че

радиооборудването на “KD-X372BT/KD-X272BT” е

в съответствие с Директива 2014/53/ЕС.

Пълният текст на ЕС декларацията за

съответствие е достъпен на следния интернет

адрес:

http://www.jvc.net/cs/car/eudoc/

Turkish

Burada, JVCKENWOOD “KD-X372BT/KD-X272BT”

radyo ekipmanının 2014/53/AB Direktifine uygun

olduğunu bildirir.

AB uyumluluk deklarasyonunun tam metni

aşağıdaki internet adresinde mevcuttur.

http://www.jvc.net/cs/car/eudoc/

Русский

JVCKENWOOD настоящим заявляет, что

радиооборудование «KD-X372BT/KD-X272BT»

соответствует Директиве 2014/53/EU.

Полный текст декларации соответствия

ЕС доступен по следующему адресу в сети

Интернет:

http://www.jvc.net/cs/car/eudoc/

Українська

Таким чином, компанія JVCKENWOOD заявляє,

що радіообладнання «KD-X372BT/KD-X272BT»

відповідає Директиві 2014/53/EU.

Повний текст декларації про відповідність ЄС

можна знайти в Інтернеті за такою адресою:

http://www.jvc.net/cs/car/eudoc/

JS_JVC_QSG_KD_X372BT_E_C20.indd ixJS_JVC_QSG_KD_X372BT_E_C20.indd ix 10/8/2019 10:50:20 AM10/8/2019 10:50:20 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

x

JS_JVC_QSG_KD_X372BT_E_C20.indd xJS_JVC_QSG_KD_X372BT_E_C20.indd x 10/8/2019 10:50:20 AM10/8/2019 10:50:20 AM

2

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Basic procedure

1 Remove the key from the ignition switch, then disconnect the

terminal of the car battery.

2 Connect the wires properly. See “Wiring connection” on page 3.

3 Install the unit to your car. See “Installing the unit (in-dash

mounting)”.

4 Connect the terminal of the car battery.

5 Press B SRC to turn on the power.

6 Detach the faceplate and reset the unit within 5 seconds. See “How to

reset” on page 4.

Installing the unit (in-dash mounting)

Dashboard

INSTALLATION/CONNECTION

This section is for the professional installer.

For safety’s sake, leave wiring and mounting to professionals. Consult the

car audio dealer.

Warning

• The unit can only be used with a 12V DC power supply, negative ground.

• Disconnect the battery’s negative terminal before wiring and mounting.

• Do not connect Battery wire (yellow) and Ignition wire (red) to the car

chassis or Ground wire (black) to prevent a short circuit.

• To prevent short circuit:

– Insulate unconnected wires with vinyl tape.

– Be sure to ground this unit to the car’s chassis again after installation.

– Secure the wires with cable clamps and wrap vinyl tape around the

wires that comes into contact with metal parts to protect the wires.

Caution

• Install this unit in the console of your vehicle. Do not touch the metal parts

of this unit during and shortly after use of the unit. Metal parts such as the

heat sink and enclosure become hot.

• Do not connect the wires of speakers to the car chassis or Ground wire

(black), or connect them in parallel.

• Connect speakers with a maximum power of more than 50W. If the

maximum power of the speakers is lower than 50W, change the

[AMPGAIN]

setting to avoid damaging the speakers.

• Mount the unit at an angle of less than 30º.

• If your vehicle wiring harness does not have the ignition terminal, connect

Ignition wire (red) to the terminal on the vehicle’s fuse box which provides

12 V DC power supply and is turned on and off by the ignition key.

• Keep all cables away from heat dissipate metal parts.

• After the unit is installed, check whether the brake lamps, blinkers, wipers,

etc. on the car are working properly.

• If the fuse blows, first make sure the wires are not touching car’s chassis,

then replace the old fuse with one that has the same rating.

Hook on the top side

Bend the appropriate tabs to hold the

sleeve firmly in place.

Dashboard of your car

JS_JVC_QSG_KD_X372BT_E_EN.indd 2JS_JVC_QSG_KD_X372BT_E_EN.indd 2 3/7/2019 1:52:22 PM3/7/2019 1:52:22 PM

3

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Removing the unit

Installing the unit (without mounting sleeve)

1 Remove the mounting sleeve and trim plate from the unit.

2 Align the holes in the unit (on both sides) with the vehicle

mounting bracket and secure the unit with screws (commercially

available).

Part list (supplied)

(A) Faceplate (×1)

(B) Trimplate (×1)

(C) Mounting sleeve (×1)

(D) Wiring harness (×1)

(E) Extraction key (×2)

Use only the specified screws.

Using wrong screws might damage

the unit.

Wiring connection

Antenna terminal

Fuse (10 A)

Pin Color and function

A4 Yellow : Battery

A5 Blue/White : Power control (12 V

350 mA)

A6 Orange/white : Car light control switch

A7 Red : Ignition (ACC)

A8 Black : Earth (ground) connection

B1, B2

Purple

]

, Purple/black

[

: Rear speaker (right)

B3, B4

Gray

]

, Gray/black

[

: Front speaker (right)

B5, B6

White

]

, White/black

[

: Front speaker (left)

B7, B8

Green

]

, Green/black

[

: Rear speaker (left)

a Light blue/yellow: To the

steering wheel remote control

adapter

b Yellow: Battery wire

c Yellow: A4

d Red: Ignition wire

e Red: A7

ISO connectors

JS_JVC_QSG_KD_X372BT_E_EN.indd 3JS_JVC_QSG_KD_X372BT_E_EN.indd 3 3/7/2019 1:52:23 PM3/7/2019 1:52:23 PM

4

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

BASICS

Faceplate

KD-X272BT:

Volume knob

USB input

terminal

Detach button Display window*1

Auxiliary input jack

*1 Only for illustration purpose.

Attach Detach How to reset

Reset the unit

within 5seconds

after detaching the

faceplate.

To On the faceplate

Turn on the power

Press B SRC.

• Press and hold to turn off the power.

Adjust the volume Turn the volume knob.

Select a source

Press B SRC repeatedly.

Change the display information*2

Press

repeatedly.

*2 One of the display information supports Music Synchronization Effect. The

brightness level of the buttons changes and synchronizes with the music level.

BEFORE USE

IMPORTANT

• To ensure proper use, please read through this Guide before using

this product. It is especially important that you read and observe

Warnings and Cautions in this Guide.

• Please keep the Guide in a safe and accessible place for future

reference.

Warning

Do not operate any function that takes your attention away from safe

driving.

Caution

Volume setting:

• Adjust the volume so that you can hear sounds outside the car to

prevent accidents.

• Lower the volume before playing digital sources to avoid

damaging the speakers by the sudden increase of the output level.

General:

• Avoid using the external device if it might hinder safe driving.

• Make sure all important data has been backed up. We shall bear no

responsibility for any loss of recorded data.

• Never put or leave any metallic objects (such as coins or metal

tools) inside the unit to prevent a short circuit.

JS_JVC_QSG_KD_X372BT_E_EN.indd 4JS_JVC_QSG_KD_X372BT_E_EN.indd 4 3/7/2019 1:52:23 PM3/7/2019 1:52:23 PM

5

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

GETTING STARTED

1

Cancel the demonstration

When you turn on the power for the first time (or

[FACTORY RESET]

is set to

[YES]

), the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”

1 Press the volume knob.

[YES]

is selected for the initial setup.

2 Press the volume knob again.

“DEMO OFF” appears.

2

Set the clock and date

1 Press and hold .

2 Turn the volume knob to select

[CLOCK]

, then press the knob.

To adjust the clock

3 Turn the volume knob to select

[CLOCKADJUST]

, then press the knob.

4 Turn the volume knob to make the settings, then press the knob.

Set the time in the order of “Hour” “Minute”.

5 Turn the volume knob to select

[CLOCK FORMAT]

, then press the knob.

6 Turn the volume knob to select

[12H] or [24H]

, then press the knob.

To set the date

7 Turn the volume knob to select

[DATESET]

, then press the knob.

8 Turn the volume knob to make the settings, then press the knob.

Set the date in the order of “Day” “Month” “Year”.

9 Press to exit.

To return to the previous setting item, press

.

3

Set the basic settings

1 Press and hold .

2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected or activated.

4 Press to exit.

To return to the previous setting item, press

.

Default: [XX]

[SYSTEM]

[KEY BEEP]

(Not applicable when 3-way crossover is selected.)

[ON]: Activates the keypress tone. ; [OFF]: Deactivates.

[FACTORY RESET]

[YES]: Resets the settings to default (except the stored station). ;

[NO]: Cancels.

[CLOCK]

[CLOCK DISPLAY]

[ON]: The clock time is shown on the display even when the unit is

turned off. ; [OFF]: Cancels.

[ENGLISH]

Select the display language for menu and music information if

applicable.

By default, [ENGLISH] is selected.

[РУССКИЙ]

[ESPANOL]

[FRANCAIS]

[DEUTSCH]*

* Only for KD-X372BT.

JS_JVC_QSG_KD_X372BT_E_EN.indd 5JS_JVC_QSG_KD_X372BT_E_EN.indd 5 9/7/2019 5:15:20 PM9/7/2019 5:15:20 PM

6

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

RADIO

Search for a station

1 Press B SRC repeatedly to select FM or AM.

2 Press S / T to search for a station automatically.

(or)

Press and hold S / T until “M” flashes, then press repeatedly to

search for a station manually.

Settings in memory

You can store up to 18 stations for FM and 6 stations for AM.

Store a station

While listening to a station....

Press and hold one of the number buttons (1 to 6).

(or)

1 Press and hold the volume knob until “PRESETMODE” flashes.

2 Turn the volume knob to select a preset number, then press the knob.

“MEMORY” appears once the station is stored.

Select a stored station

Press one of the number buttons (1to6).

(or)

1 Press .

2 Turn the volume knob to select a preset number, then press the knob.

USB/iPod

Selectable source:

• KD-X372BT: USB/iPod USB or iPod BT

• KD-X272BT: USB

Start playback

The source changes automatically and playback starts when you attach a

device (USB device/ iPod/iPhone) to the USB input terminal.

To On the faceplate

Reverse/Fast-forward

Press and hold S / T.

Select a file

Press S / T.

Select a folder

Press 2 J / 1 K.

Repeat play

Press 4  repeatedly.

Random play

Press 3  repeatedly.

JS_JVC_QSG_KD_X372BT_E_EN.indd 6JS_JVC_QSG_KD_X372BT_E_EN.indd 6 3/7/2019 1:52:23 PM3/7/2019 1:52:23 PM

7

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

MENU SETTINGS

1 Press and hold to enter menu settings.

2 Turn the volume knob to select an item, then press the knob.

3 Repeat step 2 until the desired item is selected/activated.

4 Press to exit.

To return to the previous setting item, press

.

• Refer to the INSTRUCTION MANUAL on the following website for the

detailed explanation of each item: <http://www.jvc.net/cs/car/>

• The availability of each item vary depending on the model.

Menu items

[EQ SETTING]

: Selects a preset equalizer or adjusts your own sound

settings.

[AUDIO CONTROL]

: Sets your preferred audio settings.

[SOUND EFFECT]

: Sets your preferred sound effect.

[DISPLAY]

: Sets your preferred control for the display window.

[TUNER SETTING]

: Settings for radio source.

[BT MODE]

: Settings for using a Bluetooth device.

[REMOTE APP]

: Settings for using smartphone to control this unit.

[MIC GAIN]

*1 : Sets the sensitivity of the microphone.

[NR LEVEL]

*1 : Adjusts the noise reduction level.

[ECHO CANCEL]

*1 : Adjusts the echo cancellation delay time.

[SYSTEM]

: Settings for this unit.

[CLOCK]

: Adjusts the clock.

[ENGLISH]

: Selects language for the menu and music information.

[ESPANOL]

: Selects language for the menu and music information.

[FRANCAIS]

: Selects language for the menu and music information.

[DEUTSCH]

*2 : Selects language for the menu and music information.

[РУССКИЙ]

: Selects language for the menu and music information.

[DEMO MODE]

: Activates or deactivates the display demonstration.

*1 Applicable only while talking on the phone.

*2 Only for KD-X372BT.

Examples of some well-used settings

Subwoofer Level Setting

1 Press and hold to enter menu settings.

2 Turn the volume knob clockwise to select

[AUDIO CONTROL]

, then press

the knob.

3 Turn the volume knob clockwise to select

[SUBWOOFER SET]

, then press

the knob.

4 Turn the volume knob clockwise to select

[ON]

, then press the knob.

5 Turn the volume knob clockwise to select

[SUB.W LEVEL]

, then press the

knob.

6 Press the volume knob if

[PRE-OUT]

is shown on the display.

7

Turn the volume knob to adjust the subwoofer level, then press the knob.

Continued on the next page...

JS_JVC_QSG_KD_X372BT_E_EN.indd 7JS_JVC_QSG_KD_X372BT_E_EN.indd 7 3/7/2019 1:52:23 PM3/7/2019 1:52:23 PM

8

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

OTHER INFORMATION

For playback operations of AUX, Spotify, AMAZON ALEXA sources, refer to

the INSTRUCTION MANUAL on the following website: <http://www.jvc.net/

cs/car/>

• The availability of each source vary depending on the model.

Note for specifications

Bluetooth Frequency Range:

2.402 GHz — 2.480 GHz

Bluetooth RF Output Power (E.I.R.P.):

+4 dBm (MAX), Power Class 2

Speaker Impedance:

4Ω—8Ω

Operating Voltage:

12 V DC car battery

8 Press to exit the setting menu.

Note:

You need to set

[SPK/PRE OUT]

to

[REAR/SUB.W]

or

[SUB.W/SUB.W]

before you can

make the subwoofer level settings.

JS_JVC_QSG_KD_X372BT_E_EN.indd 8JS_JVC_QSG_KD_X372BT_E_EN.indd 8 3/7/2019 1:52:24 PM3/7/2019 1:52:24 PM

9

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

BLUETOOTH®

• Depending on the Bluetooth version, operating system and the

firmware version of your mobile phone, Bluetooth features may not

work with this unit.

• Be sure to turn on the Bluetooth function of the device to make the

following operations.

• Signal conditions vary depending on the surroundings.

Connect the microphone

Connect the supplied microphone to the microphone input jack on the rear

panel.

Adjust the

microphone

angle

Secure using cord

clamps (not supplied)

if necessary.

Pair and connect a Bluetooth device for the first time

1 Press B SRC to turn on the unit.

2 Search and select the name of your receiver (“KD-X372BT”/

“KD-X272BT”) on the Bluetooth device.

3 Perform (A) or (B) depending on what appears on the display.

For some Bluetooth devices, pairing sequence may vary from the steps

described below.

(A) “[Device Name]”

“XXXXXX” “VOL–YES” “BACK–NO”

“XXXXXX” is a 6-digit passkey randomly generated during each pairing.

Ensure that the passkeys appear on the unit and Bluetooth device

are the same.

Press the volume knob to confirm the passkey.

Operate the Bluetooth device to confirm the passkey.

(B) “[Device Name]”

“VOL–YES” “BACK–NO”

Press the volume knob to start pairing.

• If “PAIRING” “PIN 0000” scrolls on the display, enter the PIN code

“0000” into the Bluetooth device.

• If only “PAIRING” appears, operate the Bluetooth device to confirm

pairing.

“PAIRING COMPLETED” appears when pairing is completed and “

” will light

up when the Bluetooth connection is established.

Answer a call

Press or the volume knob.

• To adjust the phone volume

[00]

to

[35]

, turn the volume knob.

• To end a call, press and hold or the volume knob.

Audio player via Bluetooth

1 Press B SRC repeatedly to select BTAUDIO.

• For KD-X272BT: Pressing enters BT AUDIO directly.

2 Operate the audio player via Bluetooth to start playback.

To On the faceplate

Play back/pause Press the volume knob.

Select group or folder

Press 2 J / 1 K.

Reverse skip/Forward skip

Press S / T.

Reverse/Fast-forward

Press and hold S / T.

Repeat play

Press 4  repeatedly.

Random play

Press 3  repeatedly.

JS_JVC_QSG_KD_X372BT_E_EN.indd 9JS_JVC_QSG_KD_X372BT_E_EN.indd 9 3/7/2019 1:52:24 PM3/7/2019 1:52:24 PM

2

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Procedimiento básico

1 Quite la llave del interruptor de encendido; después, desconecte el

terminal

de la batería del automóvil.

2 Conecte los cables correctamente. Consulte “Conexión del cableado” en la

página 3.

3 Instale la unidad en su automóvil. Consulte “Instalación de la unidad

(montaje en el tablero)”.

4 Conecte el terminal de la batería del automóvil.

5 Pulse B SRC para encender la unidad.

6 Extraiga la placa frontal y reinicialice la unidad en menos de 5 segundos.

Consulte “Cómo reinicializar” en la página 4.

Instalación de la unidad (montaje en el tablero)

Salpicadero

INSTALACIÓN/CONEXIÓN

Esta sección es para los instaladores profesionales.

Para fines de seguridad, deje que un profesional realice el cableado y el montaje.

Consulte con un distribuidor de productos de audio para automóviles.

Advertencia

• La unidad puede utilizarse solamente con una fuente de alimentación de

12VCC con negativo a masa.

• Desconecte el terminal negativo de la batería antes de realizar el cableado y el

montaje.

•

Para evitar un cortocircuito, no conecte el cable de la batería (amarillo) ni el cable

de encendido (rojo) al chasis del vehículo o cable de conexión a masa (negro).

• Para evitar cortocircuitos:

– Utilice una cinta de vinilo para aislar los cables no conectados.

– Asegúrese de volver a conectar a masa esta unidad al chasis del automóvil

después de la instalación.

– Para proteger los cables, asegúrelos con abrazaderas de cables y con

una cinta de vinilo, enrolle los cables que entran en contacto con partes

metálicas.

Precaución

•

Instale esta unidad en la consola de su vehículo. No toque las partes metálicas de

la unidad durante o un poco después del uso de la unidad. Las partes metálicas,

tales como el disipador de calor o la carcasa, pueden estar muy calientes.

• No conecte los cables de los altavoces al chasis del vehículo, al cable de

conexión a masa (negro) o en paralelo.

• Conecte altavoces con una potencia máxima de más de 50 W. Si la potencia

máxima de los altavoces es inferior a 50 W, cambie el ajuste

[AMPGAIN]

para

evitar daños en los mismos.

• Monte la unidad a un ángulo de menos de 30˚.

• Si el mazo de conductores de su vehículo no dispone de terminal de encendido,

conecte el cable de encendido (rojo) al terminal de la caja de fusibles del

vehículo, el cual suministrará una alimentación de 12 V CC y podrá conectarse y

desconectarse mediante la llave de encendido.

• Mantenga todos los cables alejados de las partes metálicas disipadoras de calor.

• Después de instalar la unidad, compruebe que las lámparas de freno, las luces

intermitentes, el limpiaparabrisas, etc. funcionen satisfactoriamente.

• Si se funde el fusible, en primer lugar asegúrese de que los cables no estén en

contacto con el chasis del vehículo y, a continuación, reemplace el fusible usado

por otro del mismo régimen.

Gancho en el

lado superior

Doble las lengüetas apropiadas para

retener firmemente la manga en su lugar.

Salpicadero del automóvil

JS_JVC_QSG_KD_X372BT_E_SP.indd 2JS_JVC_QSG_KD_X372BT_E_SP.indd 2 19/7/2019 10:02:14 AM19/7/2019 10:02:14 AM

La pagina sta caricando ...

JVC KD-X272BT Manuale del proprietario

JVC KD-X272BT Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti