Sony Ericsson CK 3200 LS-COLOR Manuale utente

Hands-free

Car Kit

3200 LS-Color

3400 LS-GPS

User manual

For Bluetooth

Mobile Phone

FRA

ESP

ITA

DUT

DEU

POR

P.25

P.36

P.47

P.58

P.69

ENG

P. 3

P.14

Notice 3200CL 3400 ZoneC14.12.05.qxp 10/01/2006 17:13 Page 1

Warning

The manufacturer Parrot S.A. and its affiliates should not be held liable towards end users or third parties to prejudice caused by misusage of the product, nor for usage that

would be in violation of local traffic regulations and laws.

Disclaimer

The information in this document is subject to change without notice and does not represent a commitment on the part of vendor. No warranty or representation, either expressed

or implied, is made with respect of quality, accuracy or fitness for any particular purpose of this document. The associated with it at any time without obligation to notify any per-

son or organisation of such changes. In no event will the manufacturer to liable for direct, indirect, special, incidental or consequential damages arising out of the use or inabi-

lity to use this product or documentation, even if advised of the possibility of such damages. This document contains material protected by copyright. All right are reserved. No

part of this manual may be reproduced or transmitted in any forme, by any means or for any purpose without express written consent. Product names appearing in this document

are mentioned for identification purposes only. All trademarks, product names appearing in this document are registred property of their respective owners.

FCC Compliance Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions.

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

Declaration of Conformity

We, Parrot S.A. of 174 quai de Jemmapes, 75010 Paris, France, declare under our sole responsibility that our product, the Parrot 3200 LS-Color/3400LS-GPS, to which

this declaration relates is in conformity with appropriate standards EN300328, EN301489-17, EN 60950 following the provision of Radio Equipment and

Telecommunication Equipment directive, with requirements covering EMC directive 89/336/EEC and Low Voltage directive 73/23/EEC.

Bluetooth®

The Bluetooth® word mark and logos are owned by the Bluetooth® SIG, Inc. and any use of such marks by Parrot S.A. is under license. Other trademarks and trade names are

those of their respective owners.

Correct Disposal of This Product ( Waste Electrical & Electronic Equipment )

(Applicable in the European Union and other European countries with separate collection systems). This marking shown on the product or its literature, indicates

that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncon-

trolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household

users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item

for environ, mentally safe recycling. Business users should contract their supplier and the terms and conditions of the purchase contract. This product should not

be mixed with other commercial wastes for disposal.

2

Notice 3200CL 3400 ZoneC14.12.05.qxp 10/01/2006 17:13 Page 2

3200 LS-COLOR / 3400 LS-GPS

Directions for use - User guide

3

Français

Español

Italiano

Deutsch

Português

Dutch

English

Notice 3200CL 3400 ZoneC14.12.05.qxp 10/01/2006 17:13 Page 3

4

INTRODUCTION

The Bluetooth® technology enables voice and data communications via a

short-distance radio link. It allows several electronic devices to

communicate with each other, particularly telephones and hands-free kits.

Parrot is drawing on its long years of experience in signal processing and

voice recognition technology to introduce a hands-free kit offering superior

audio quality during calls.

Thank you for buying a Parrot hands-free kit. With the Parrot 3200 LS-Color, you

will be able to make telephone calls from your car while keeping your hands on

the wheel.

With its colour interface and customisable wallpaper, the Parrot 3200 LS-Color

is the most user-friendly hands-free kit. It acts as a real extension of your mobile

phone. We hope that the kit will give you complete satisfaction.

KIT CONTENTS

 Colour LCD screen

 Installation cable

 Electronic control unit

 Directions for use

 Fitting accessories

 Microphone

FITTING

First of all, choose the place for the colour screen inside your vehicle.

We would advise you to fit it in the centre of the dashboard or near you.

Make sure that you can view the screen at a good angle and that it does not obs-

truct your view of the road. Once the hands-free kit is fully installed and switched

on, you can adjust the screen's brightness.

There are two places where you can choose to fit the microphone connection:

either directly at the side of the screen or on the cable connected to the bottom

of the screen. Place the microphone to the left of the rear-view mirror to ensure

optimum audio quality.

The installation cable is equipped with ISO connectors and a line-out jack for

connecting directly to your amplifier, if applicable.

Car stereo with line-in jacks:

Preferably use this type of connection by connecting the brown and white wires

(or red and black), along with the yellow mute wire to the back of your car ste-

reo.

Car stereo with ISO connectors:

Disconnect the car stereo's audio and power leads. Join the female connectors of

the kit's cable to the car stereo. Join the vehicle's audio and power supply cables

to the male connectors. If the car stereo features a mute jack, connect the yellow

wire of the kit's cable to one of the "mute-in" jacks (1, 2 or 3).

Car stereo without ISO connectors:

You must purchase an ISO adapter cable.

Fitting the kit's cable:

. The red wire of the kit's cable must be connected to the constant 12V supply,

the orange wire to the ignition 12V and the black wire to earth.

. Check the wiring diagram of the car stereo's ISO lead.

On some vehicles, the red and orange wires may need to be reversed.

This can easily be done by reversing the two fuse holders.

. Do not connect the orange wire to the constant 12V supply, as you could run

down the vehicle's battery.

Checking the installation:

.

If your 3200 LS-Color is correctly fitted, you should see the message

"Goodbye" on the screen when you switch off your car's ignition.

Otherwise, the ignition 12V and the constant 12V supply have been reversed. In

this case, reverse the two fuse holders on the kit's power supply lead.

Notice 3200CL 3400 ZoneC14.12.05.qxp 10/01/2006 17:13 Page 4

5

Français

EspañolItaliano

Deutsch

Português

Dutch

English

Notice 3200CL 3400 ZoneC14.12.05.qxp 10/01/2006 17:13 Page 5

6

PAIRING WITH YOUR MOBILE PHONE:

Using for the first time

The first time that you switch on the 3200 LS-Color, you must pair your

mobile phone with the kit.

. Enable the Bluetooth mode on your phone.

. On the hands-free kit, scroll through the menus until you come to Settings

Pair with phone…, and select the relevant option for your phone. A 4-digit

PIN code then appears on screen. Memorise it.

. Search for any peripherals: for further information on this procedure,

refer to the Bluetooth chapter in your mobile phone's user guide or

check out our website at :

www.parrot.biz/guide_chm/3200LS COLOR/index.html

. Once the search has finished, "Parrot 3200LS / Parrot 3400LS" is dis

played on your phone.

. Select the kit. Your phone prompts you to enter a code: key in the code

shown on the kit screen and confirm on your phone.

. The kit's screen displays "Pairing".

. Once the data has been exchanged, "pairing successful" appears on

the 3200 LS-Color.

. The 3200 LS-Color then connects to your phone. Once the connection

has been made, the Bluetooth logo is displayed on the screen (except for

certain phones using the Headset profile).

. Some phones offer additional features, such as displaying your phone's

name on the kit's screen, as well as the battery and signal levels and

the operator's name.

You can now access the menus and their name is announced by the hands-

free kit when you turn the scroll wheel. Press the green button (or the scroll

wheel) to access the menus, and press the red button to exit them.

You can now use your hands-free kit to make and receive calls.

. Receiving a call: press the green button to answer the call.

. Ending a call: press the red button.

. Redial function: hold down the green key on the kit for two seconds

to redial the last number dialled.

. Adjusting the volume: turn the scroll wheel during a call to adjust

the volume.

Notice 3200CL 3400 ZoneC14.12.05.qxp 10/01/2006 17:13 Page 6

7

FEATURES

The kit's screen displays your mobile phone's main information, in particular your phonebook.

 Automatic downloading of your phonebook.

 Display of the caller's name and image.

 Contacts phoned using the kit's voice recognition feature.

 Car stereo muting during calls.

 Call records.

 Volume adjustment during calls.

 Dual call management.

 Automatic redial of the last caller.

 Wallpaper change.

 Brightness settings.

 Ringtone selection.

 Language setting.

 DTMF: when you receive a call from your message system, press the scroll wheel so that you can access the digits allowing you to

manage your message.

Note: most of these features depend on your phone.

Français

EspañolItaliano

Deutsch

Português

Dutch

English

Notice 3200CL 3400 ZoneC14.12.05.qxp 10/01/2006 17:13 Page 7

o Phonebook

A, B, C...

o Calls record

Calls received

Calls made

Missed calls

o Dial

o Settings

Contacts management

Contacts

A, B, C...

Names

Record a voice tag

Delete a voice tag

See the picture

Delete picture

Delete contact

Receive a contact

Delete all contacts

Sort Order

Paired devices

List

Connect

Disconnect

Delete

Define default phone

Paired with phone

Other Phones

Phone HS

P800/P900

Windows CE

®

Samsung E530/E720

Languages

Automatique

English...

Voice Cmds

Choose voice recognition

Phone

Carkit

Keywords

Office, Home, Mobile, General, Other.

Display

Brightness

Phonebook zoom

Wallpaper

Color’s theme

Sound

Volume

Spoken menus

Choose the ringtone

Automatic answer

Information

Update software

MENUS

8

Notice 3200CL 3400 ZoneC14.12.05.qxp 10/01/2006 17:13 Page 8

PREFERENCES

This menu enables you to fine-tune your 3200 LS-Color for easier use.

Contact management

This menu enables you to manage contacts in the Parrot 3200 LS-Color.

Once you have selected the contact from the list (which you access via the

Contact management menu) you can record or delete a voiceprint, view or

delete the photo, or delete the contact from the phonebook.

You can also receive a contact with the relevant photo (if supported by the

phone) by selecting Receive a contact. Select on your phone the contact you

want to send via Bluetooth to the hands-free kit. From then on, whenever this

person calls you, his or her photo and name will appear on the kit screen.

Refer to your phone's user guide or check out.

www.parrot.biz/guide_CHM/3200LS Color/index.html.

You can also delete all the contacts in the kit or reverse the sort order from

surname-first name to first name-surname

9

Français

EspañolItaliano

Deutsch

Português

Dutch

English

ACCESSING THE MENUS

Phonebook

After pairing your phone with the 3200 LS-Color, synchronisation with your pho-

nebook will begin automatically (*). Once the synchronisation process is com-

plete, you can access your phonebook from the hands-free kit screen. To access

your phonebook and call a contact, turn the scroll wheel to access the menus, then

select Phonebook. Scroll through the letters until you reach the first letter of the

relevant person's name and confirm. You will then see this person's name and the

various phone numbers you have for them.

(*) Depending on the model of your Bluetooth phone. Visit our website at www.parrot.biz for the latest infor-

mation on synchronisation.

Call records

This menu option displays the list of calls and is divided into three sub-menus:

Missed calls / Calls received / Calls made.

It is automatically synchronised with your phone's call records (*) and you can

access them to call back a missed call.

 Select the contact from these menus.

 Press the scroll wheel or the green button to call the contact back.

(*) Depending on the model of your Bluetooth phone.

Dial

Select this menu to dial a number directly via the kit.

 Turn and press the scroll wheel to select a digit.

 The trashcan icon deletes the last digit.

 Once the number has been dialled, press the green button to call.

Notice 3200CL 3400 ZoneC14.12.05.qxp 10/01/2006 17:13 Page 9

10

VOICE RECOGNITION

Select voice recognition

The voice recognition capability featured by the 3200 LS-Color is more

extensive and robust than that boasted by mobile phones, and can work in

noisy surroundings.

- Car kit reco: the selected voiceprints are those recorded in the memory

of the hands-free kit.

- Phone reco: the selected voiceprints are those recorded in the memory

of the phone.

Keywords

Recording keywords enables you to phone without taking your hands off the

wheel. You can control the whole call with your voice.

Keywords: Home, Work, Mobile, General, Other.

Keywords are used to select the required phone number when several dif-

ferent numbers are associated with the same contact. All keywords must be

recorded, so that they can be validated.

Once the keywords have been recorded, you need to say the following

sequence of words to be able to make a call using the voice recognition

feature.

Press the green button and after the beep, say: "John Smith…

(beep)…Work…". And this will put you in touch with John Smith using the

phone number classified as his work number.

Paired devices

The 3200 LS-Color lets you pair up to five Bluetooth phones, but bearing in

mind that only one can be connected at any one time.

The Paired devices menu allows you to connect, disconnect or delete a

phone from the kit's memory.

From the Define default phone menu option, you can control the priority

level given to the Bluetooth phone during connections with several phones

in the car.

Caution:

Deleting a paired phone will clear any voiceprints attributed to the contacts

on that phone.

Pair phone

Before pairing your Bluetooth phone, you must enable the mode correspon-

ding to your Bluetooth phone.

The different modes are as follows:

- Other phones

- Headset phones

- P800-P900

- Windows CE

- Sony-Ericsson K600, W800, K750

- Samsung E530, E720,

- Samsung D500, Sagem My-X8

- Motorola iDEN 605

- Samsung Z140, Z300, Z500

Once the relevant mode has been selected, a (random) 4-digit code

appears. Start searching for Bluetooth peripherals from your phone. Once

you have found the hands-free kit, select it and enter this code.

Note: for greater compatibility with phones, new pairing modes are likely to be added to future versions.

Notice 3200CL 3400 ZoneC14.12.05.qxp 10/01/2006 17:13 Page 10

11

Français

EspañolItaliano

Deutsch

Português

Dutch

English

Language

Select the language for displaying the menus on your 3200 LS-Color.

Display

Five options are available for customising the way in which information is

displayed:

. Brightness : use the scroll wheel to obtain the required level and confirm

by clicking the scroll wheel.

. Phonebook zoom: used to display the Phonebook menu over 3 or 4

lines.

. Wallpaper: allows you to select a wallpaper image.

. Theme: alloms you to select a color theme.

Sounds

. Volume: use the scroll wheel to control the volume level of the call and

the microphones' sensitivity.

. Speaking menus: adjust the volume of the hands-free kit's prompts

to the required level.

. Ringtone selection:

for phones that do not play a specific ringtone for

incoming calls, select the ringtone that you wish to hear when you receive a call.

Automatic answer

Enable this mode if you want the 3200 LS-Color to automatically answer

any incoming calls.

Information

This menu provides information on the version of the built-in software.

UPDATE

You can update the software version of your 3200 LS-Color by Bluetooth.

Enable this mode before updating. The update is performed by Bluetooth

from a computer equipped with Bluetooth.

Updating provides access to new features and improves compatibility with

the advanced functions on an even wider range of phones.

For further information, visit our website: www.parrot.biz.

PARROT 3400 LS-GPS

The Parrot 3400 LS-GPS kit features a built-in GPS module (Global

Positioning System) providing real-time information on the vehicle's current

position. This information is available by Bluetooth over a channel that can

be accessed by most PDAs and smartphones equipped with navigation soft-

ware.

Procedure for connecting to the GPS service

If a navigation application is installed on your PDA or smartphone, simply

pair your device with the Parrot 3400 and establish a Bluetooth serial

connection with the GPS port (the number of the outgoing serial port to be

used will depend on your PDA or smartphone).

The configuration to be chosen on your device is NMEA 0183v2 9600 if

prompted by your navigation software.

Notice 3200CL 3400 ZoneC14.12.05.qxp 10/01/2006 17:13 Page 11

12

Several statuses may be encountered:

- Status 1: no GPS connected - No fix (satellite icon greyed out)

- Status 2: no GPS connected - Fix (satellite icon coloured)

- Status 3: GPS connected - No fix (satellite icon greyed out, with a trans-

mission symbol)

- Status 4: GPS connected - Fix (satellite icon coloured, with a transmission

symbol)

Note: the fix indicates that the satellite data received by the hands-free kit

is valid.

Pr

ocedure for connecting to the GPS service:

1.If you are already connected via Bluetooth to your phone:

 Disconnect your phone (hold down the red button on the hands-free kit

for two seconds). The hands-free kit then changes to status 1 or 2 (if the fix

is established).

 From your navigation software (installed on your PDA or smartphone),

connect to the GPS service of the 3400 LS-GPS. The hands-free kit then

changes to status 3 or 4.

 Once connected, a transmission symbol appears beneath the satellite.

If the satellite icon is coloured, the fix is established (hands-free kit in status

4). The distance travelled will then be displayed in the top-right corner of

the screen.

 Once the GPS connection is established, the kit automatically recon-

nects to your phone's telephony service.

2.If you are not already connected via Bluetooth to your

phone:

 From your navigation software (installed on your PDA or smartphone),

connect to the GPS service of the 3400 LS-GPS. The hands-free kit then

changes to status 3 or 4.

 Once connected, a transmission symbol appears beneath the satellite.

If the satellite icon is coloured, the fix is established (hands-free kit in status

4). The distance travelled will then be displayed in the top-right corner of

the screen.

 You can now pair/connect your phone.

Voice indications for navigation

Once the GPS service is connected, you can listen to the voice instructions

via your vehicle's speakers. Navigation will then be plain sailing (this fea-

ture is only available on certain types of PDA and smartphone, and may

also depend on the software).

To enable voice indications, simply open the Headset service available on

the hands-free kit from your PDA or smartphone.

When you are connected to the hands-free kit's GPS service, incoming and

outgoing calls are managed automatically to ensure that use of the tele-

phony service is made as easy as possible.

GPS menu

In this section, you can completely disable the GPS service to prevent

anyone else from connecting to this service.

You will also find menus for customising the display when connected to the

GPS: number of satellites, distance (kilometres or miles), and much more.

Note: if your vehicle is fitted with an athermic windscreen, the GPS signal

received might be of poor quality, in which case, you can add an external

aerial that plugs into the back of the screen. To acquire such an aerial,

contact your dealer.

Notice 3200CL 3400 ZoneC14.12.05.qxp 10/01/2006 17:13 Page 12

13

HOTLINE

Our hotline is at your disposal. You can contact the hotline by email or telephone.

Open from Monday to Friday between 9 am and 6 pm (GMT+1).

Check out our website (www.parrot.biz) for further information.

NOTES

Français

Español

Italiano

Deutsch

Português

Dutch

English

Notice 3200CL 3400 ZoneC14.12.05.qxp 10/01/2006 17:13 Page 13

3200 LS-COLOR / 3400 LS-GPS

Notice d'utilisation - Guide d'utilisateur

14

English

EspañolItaliano

Deutsch

Português

Dutch

Français

Notice 3200CL 3400 ZoneC14.12.05.qxp 10/01/2006 17:13 Page 14

15

INTRODUCTION

La technologie Bluetooth® permet d'établir des communications voix et données

via une liaison radio courte distance.

Elle permet à de nombreux équipements électroniques de communiquer entre eux,

notamment les téléphones et les kits mains-libres.

Parrot tire bénéfice des ses longues années d'expérience en traitement du signal

et reconnaissance vocale pour introduire un kit mains-libres avec une qualité

audio supérieure lors des communications.

Merci d'avoir acheté un kit mains-libres Parrot. Avec le Parrot 3200 LS-Color vous

allez pouvoir passer des appels téléphoniques depuis votre voiture en gardant

les mains sur le volant.

Avec son interface couleur et son fond d'écran personnalisable, le Parrot 3200 LS-

Color est le kit mains-libres le plus agréable à utiliser.

Il fonctionne comme une véritable extension de votre téléphone portable.

Nous espérons qu'il vous donnera entière satisfaction

CONTENU DE L'EMBALLAGE

 Ecran LCD couleur.

 Câble d'installation.

 Boîtier électronique.

 Notice d'utilisation.

 Supports de fixation.

 Microphone.

INSTALLATION

Choisissez d'abord l'emplacement de l'écran couleur dans l'habitacle de votre

véhicule. Nous vous conseillons de le positionner au centre de votre tableau de

bord ou proche de vous.

Assurez-vous d'avoir un bon angle de vue sur l'écran et que celui-ci ne gène pas

votre vision de la route. Une fois le kit mains-libres complètement installé et mis

en service vous pourrez régler la luminosité de l'écran. La prise du micro s'ins-

talle à deux endroits au choix. Directement sur le côté de l'écran, ou sur le câble

connecté sur le dessous de l'écran. Le micro se positionne sur la gauche du rétro-

viseur pour une meilleure qualité audio.

Le câble d'installation est équipé de connecteurs " ISO ", ainsi qu'une sortie " line

out " pour se connecter directement sur l'amplificateur si vous en avez un.

Autoradio avec entrées " line in " :

Utilisez de préférence ce type de connexion en reliant les fils marron et blanc (ou

rouge et noir) ainsi que le fil jaune du Mute à l'arrière de votre autoradio.

Autoradio avec connecteur " ISO " :

Déconnectez les faisceaux audio et alimentation de votre autoradio. Reliez les

connecteurs femelles du câble du kit à l'autoradio. Reliez les faisceaux audio et

alimentation du véhicule aux connecteurs mâles.

Si l'autoradio est équipé d'une entrée Mute, reliez le fil jaune du câble du kit à

l'une des entrées Mute 1, 2 ou 3.

Autoradio sans connecteurs " ISO " :

Vous devez vous procurer un câble adaptateur " ISO ".

Installation du câble du kit :

. Le fil rouge du câble du kit doit être relié au +12V permanent,

le fil orange au 12V après-contact et le fil noir à la masse.

. Vérifiez le schéma électrique du faisceau " ISO " de l'autoradio.

Sur certains véhicules, il est nécessaire d'inverser les fils rouge et orange.

Cette opération s'effectue simplement en inversant les deux portes fusibles.

. Ne connecter pas le fil orange au 12V permanent, vous risqueriez de déchar-

ger la batterie du véhicule.

Vérification de l'installation :

. Si votre 3200 LS-Color est bien installé, vous devez voir le message

" au revoir " sur l'écran lors que vous coupez le contact de votre voiture.

Sinon, c'est que le 12V clé et le 12V permanent sont inversés.

Dans ce cas là, veuillez inverser les deux portes fusibles du câble

d'alimentation du kit.

Notice 3200CL 3400 ZoneC14.12.05.qxp 10/01/2006 17:13 Page 15

16

English

Español

Italiano

Deutsch

Português

Dutch

Français

Notice 3200CL 3400 ZoneC14.12.05.qxp 10/01/2006 17:13 Page 16

17

JUMELAGE AVEC VOTRE TELEPHONE :

Première utilisation

Lors de la première mise sous tension du 3200 LS-Color, vous devez jume-

ler votre téléphone avec le kit.

. Activez Bluetooth sur votre téléphone.

. Sur le kit mains-libres, naviguez dans les menus jusqu'à : Préférences,

Jumeler téléphone…, et sélectionnez l'option correspondante à votre

téléphone. Un PIN code de 4 chiffres est alors affiché à l'écran.

Mémorisez-le.

. Lancez une recherche de périphériques :

Pour plus d'informations sur cette opération, veuillez vous référer à la

notice de votre téléphone (chapitre Bluetooth) ou rendez-vous sur notre site

Web à :

www.parrot.biz,rubrique guides utilisateurs.

. Une fois la recherche terminée, "Parrot 3200LS / Parrot 3400LS " s'affi

che sur votre téléphone.

. Sélectionnez le kit, votre téléphone vous demande d'entrer un code :

tapez le code affiché sur l'écran du kit, et validez sur votre téléphone.

. " Jumelage en cours " s'affiche sur l'écran du kit.

. Une fois les données échangées, " jumelage terminé " s'affiche sur le

3200 LS-Color.

. Le 3200 LS-Color se connecte alors avec votre téléphone.

Une fois la connexion établie, le logo Bluetooth s'affiche sur l'écran

(excepté pour certains téléphones utilisant le profil Headset).

. Certains téléphones offrent des fonctionnalités supplémentaires, telles que

l'affichage du nom de votre téléphone sur l'écran du kit, affichage égale-

ment des niveaux de réseau et de batterie ainsi que du nom de votre opé-

rateur.

Les menus sont accessibles et leur nom est énoncé par le kit mains-libres lors-

que vous faites tourner la molette. Entrez dans les menus en appuyant sur

le bouton vert (ou la molette). Pour en sortir, appuyez sur le bouton rouge.

Vous pouvez maintenant utiliser votre kit mains-libres pour communiquer

. Recevoir un appel : appuyez sur le bouton vert pour décrocher l'ap-

pel.

. Raccrocher un appel : appuyez sur le bouton rouge.

. Fonction Bis : appuyez deux secondes sur le bouton vert du kit pour rap-

peler le dernier numéro composé.

. Réglage volume : tournez la molette pendant une communication pour

régler le volume.

Notice 3200CL 3400 ZoneC14.12.05.qxp 10/01/2006 17:13 Page 17

FONCTIONNALITES

Sur l'écran du kit, vous retrouvez les principales informations de votre téléphone, notamment votre répertoire.

 Téléchargement automatique de votre répertoire téléphonique.

 Affichage du nom et de l'image de l'appelant.

 Appel de contacts en utilisant la reconnaissance vocale du kit.

 Coupure de l'autoradio pendant la communication.

 Journal d'appel.

 Réglage du volume en communication.

 Gestion du double appel.

 Rappel automatique du dernier correspondant.

 Changement du fond d'écran.

 Réglage de la luminosité.

 Sélection de la sonnerie.

 Réglage de la langue.

 DTMF : lors d'un appel de votre messagerie, appuyez sur la molette afin d'avoir accès aux chiffres permettant de gérer vos messages.

Note : Certaines de ces fonctionnalités dépendent de votre téléphone.

18

English

EspañolItaliano

Deutsch

Português

Dutch

Français

Notice 3200CL 3400 ZoneC14.12.05.qxp 10/01/2006 17:13 Page 18

o Répertoire

A, B, C...

o Journal d’appels

Appels reçus

Appels émis

Appels manqués

o Numéroter

o Préférences

Gérer les contacts

Contacts

A, B, C...

Noms

Enregistrer une empreinte vocale

Supprimer l’empreinte vocale

Voir la photo

Supprimer le photo

Supprimer le contact

Recevoir un contact

Supprimer tous les contacts

Ordre de tri

Appareils jumelés

Liste

Connecter

Déconnecter

Supprimer

Définir téléphone préféré

Jumeler un téléphone

Autres Téléphones

Téléphone HS

P800/P900

Windows CE

®

Samsung E530/E720

...

Langues

Automatique

English...

Commande vocale

Choix de la reco vocale

Téléphone

Carkit

Mots clés

Bureau, Domicile, Portable, Général, Autre

Affichage

Luminosité

Zoom répertoire

Fond d’écran

Thèmes de couleur

Sons

Volume

Menus parlés

Choix de la sonnerie

Réponse automatique

Information

Mise à jour logiciel

19

MENUS

Notice 3200CL 3400 ZoneC14.12.05.qxp 10/01/2006 17:13 Page 19

20

ACCES AUX MENUS

Répertoire

Après vous être jumelé avec le 3200 LS-Color, la synchronisation de votre

répertoire débute automatiquement (*). A la fin de celle-ci (synchronisation

terminée), le répertoire de votre téléphone est accessible depuis l'écran du kit

mains-libres. Pour y accéder et appeler un correspondant, tournez la molette

pour accéder aux menus, puis sélectionnez Répertoire. Faites défiler les lettres

jusqu'à atteindre la première lettre du nom de cette personne et validez. Vous

y verrez le nom, les différents numéros de téléphone de cette personne.

Ensuite, sélectionnez le numéro de téléphone à appeler.

(*) Dépend du modèle de votre téléphone Bluetooth. Voir notre site internet www.parrot.biz pour les der-

nières informations sur la synchronisation.

Journal d'appels

Cette rubrique affiche la liste des appels et se divise en trois sous-menus :

Appels manqués / Appels reçus / Appels émis.

Il se synchronise automatiquement avec celui de votre téléphone (*), et vous pouvez

y accéder pour rappeler un correspondant dont vous avez manqué l'appel.

 Sélectionner le contact depuis ces menus.

 Appuyez sur la molette ou le bouton vert pour le rappeler.

(*) Dépend du modèle de votre téléphone Bluetooth.

Numéroter

Sélectionnez ce menu pour composer un numéro directement depuis le kit.

 Tournez et appuyez sur la molette pour sélectionner un chiffre.

 La lettre C efface le dernier chiffre.

 Une fois le numéro composé, appuyez sur vert pour appeler.

PREFERENCES

Ce menu vous permet d'utiliser plus confortablement votre 3200 LS-Color.

Gérer les contacts

Ce menu vous permet de gérer les contacts du Parrot 3200 LS-Color. Une fois

le contact sélectionné dans la liste (accédez au menu Gérer les Contacts), vous

pourrez enregistrer ou supprimer une empreinte vocale, voir ou effacer la

photo, ou supprimer ce contact du répertoire.

Pour recevoir un contact avec la photo associée (si supportée par le télé-

phone), sélectionnez Recevoir un Contact. Depuis votre téléphone, choisissez

le contact à envoyer par Bluetooth vers le kit mains-libres. Dorénavant, quand

cette personne vous appellera, sa photo et son nom apparaîtront sur l'écran

du kit. Vous pourrez aussi inverser l’ordre de tri: nom-prénom vers prénom-

nom.

Référez-vous au manuel d'utilisation de votre téléphone, ou rendez-vous à

www.parrot.biz/guide_CHM/3200LS Color/index.html.

English

Español

taliano

Deutsch

Português

Dutch

Français

Notice 3200CL 3400 ZoneC14.12.05.qxp 10/01/2006 17:13 Page 20

La pagina sta caricando ...

Sony Ericsson CK 3200 LS-COLOR Manuale utente

Sony Ericsson CK 3200 LS-COLOR Manuale utente

in altre lingue

Documenti correlati

Altri documenti