Acnodes MKS802 Manuale utente

Marca: Acnodes

Modello: MKS802

Categoria: Switch KVM

Tipo: Manuale utente

Questo manuale è adatto anche per

14628 Central Ave,

Chino, CA 91710

tel:909.597.7588, fax:909.597.1939

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

MKS802/803/804/1602/1603/1604

1U rackmount Matrix KVM Switch

User Manual

MKS802/803/804/1602/1603/1604: 1U rackmount Matrix

KVM switch 8/16-port RJ45 with 2/3/4 user console

14628 Central Ave,

Chino, CA 91710

tel:909.597.7588, fax:909.597.1939

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

MKS802/803/804/1602/1603/1604

1U rackmount Matrix KVM Switch

Legal Information

First English printing, October 2002

Information in this document has been carefully checked for accuracy; howeve r, no guarantee is given to the correctness of the

contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that

results from the use of this equipment.

Safety Instructions

Please read all of these instructions carefully before you use the device. Save this manual for future reference.

¦ Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.

¦ Keep equipment away from excessive humidity and heat. Preferabl y, keep it in an air-conditioned environment with

temperatures not exceeding 40º Celsius (104º Fahrenheit).

¦ When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing dam

age to other equipment or injury to persons nearb y.

¦ When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the

power supply. Proper air convection is necessary to keep it from overheating.

¦ Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.

¦ If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current

labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed

on the equipment’s ratings label.

¦ Observe all precautions and warnings attached to the equipment.

¦ If you don’t intend on using the equipment for a long time, disconnect it from the pow er outlet to prevent being dam

aged by transient over-voltage.

¦ Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power

supply or on other hardware may cause damage, fire or electrical shock.

¦ Only qualified service personnel should open the chassis. Opening it yourself cou ld damage the equipment and invali

date its warranty.

¦ If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.

What the w arranty does not cover

¦ Any product, on which the serial number has been defaced, modified or removed.

¦ Damage, deterioration or malfunction resulting from:

? Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or

failure to follow instructions supplied with the product.

? Repair or attempted repair by anyone not authorized by us.

? Any damage of the product due to shipment.

? Removal or installation of the product.

? Causes external to the product, such as electric power fluctuation or failure.

? Use of supplies or parts not meeting our specifications.

? Normal wear and tea r.

? Any other causes which does not relate to a product defect.

¦ Removal, installation, and set-up service charges.

Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the F CC

rules. These limits are designed to provide reasonable protection against harmful interference in a residential instal - lation.

Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, m ay

cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

¦ Re-position or relocate the receiving antenna.

¦ Increase the separation between the equipment and receive r.

¦ Connect the equipment into an outlet on a circuit di fferent from that to which the receiver is connected.

14628 Central Ave,

Chino, CA 91710

tel:909.597.7588, fax:909.597.1939

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

MKS802/803/804/1602/1603/1604

1U rackmount Matrix KVM Switch

Contents

< Part 1 >

Matrix DB-15

KVM

MKS802

MKS803

MKS804

MKS1602

MKS1603

MKS1604

1.1 Package contents

1.2 KVM port connection

1.3 Remote & Local console connection

1.4 KVM Cascade

1.5 Specifications

< Part 2 > Usage

2.1 KVM Button

2.2 Password

2.3 KVM OSD

2.4 KVM Hotkey & Remote Console Hotkey

P.1

P.2 - 3

P.4 - 5

P.6

P.7

P.8

P.9

P.10

P.11

14628 Central Ave,

Chino, CA 91710

tel:909.597.7588, fax:909.597.1939

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

MKS802/803/804/1602/1603/1604

1U rackmount Matrix KVM Switch

Before Installation

¦It is very important to mount the equipment in a suitable cabinet or on a stable surface.

¦Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive

dust, dirt, heat, water, moisture and vibration.

Unpacking

The equipment comes with the standard parts shown in package content. Check and make sure they are

included and in good condition. If anything is missing, or damaged, contact the supplier immediatel y.

Installation for standalone KVM

Screw A: 2 pcs Screw B: 8 pcs

M3.2 x 4.5 mm M4 x 10 mm

¦Install each bracket using screws

AB provided shown in Figure 1.

¦Fix the KVM into the rack

Figure 1.

14628 Central Ave,

Chino, CA 91710

tel:909.597.7588, fax:909.597.1939

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

MKS802/803/804/1602/1603/1604

1U rackmount Matrix KVM Switch

Part 1 . Matrix DB -15 KVM

< 1.1 > Package Contents Matrix D B -15 KV M

MK S 80 2 / 1602

KV M unit

• MKS 802 or MKS 1602 KVM unit x 1

• Mou ntin g set w / b racket & screw s x 1

• Pow er adapter w/ p ow er cord ( fo r KVM ) x 1

• Rece iver box for rem ote console x 1

• Pow er adapter w/ p ow er cord ( fo r receiver ) x 1

• 6ft Combo KVM cable for receiver box x 1

MK S 80 3 / 1603

KV M unit

• MKS 803 or MKS 1603 KVM unit x 1

• Mou ntin g set w / b racket & screw s x 1

• Pow er adapter w/ p ow er cord ( fo r KVM ) x 1

• Rece iver box for rem ote console x 2

• Pow er adapter w/ p ow er cord ( fo r receiver ) x 2

• 6ft Combo KVM cable for receiver box x 2

MK S 80 4 / 1604

KV M unit

• MKS 804 or MKS 1604 KVM unit x 1

• Mou ntin g set w / b racket & screw s x 1

• Pow er adapter w/ p ow er cord ( fo r KVM ) x 1

• Rece iver box for rem ote console x 3

• Pow er adapter w/ p ow er cord ( fo r receiver ) x 3

• 6ft Combo KVM cable for receiver box x 3

14628 Central Ave,

Chino, CA 91710

tel:909.597.7588, fax:909.597.1939

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

MKS802/803/804/1602/1603/1604

1U rackmount Matrix KVM Switch

Matrix DB-15 KVM

Local Cons ole Remote Co ns ole 1 MKS802

Power

out in

Cascade

MKS1602

Loc al Co nsole Remote Co ns ole 1 MKS803

Power

Rem ote-2 out in

Casc ade

MKS1603

Remote -3 Loc al Co nsole Remote Co nso le 1 MKS804

Power

Remote-2 out in

Cascade

MKS1604

14628 Central Ave,

Chino, CA 91710

tel:909.597.7588, fax:909.597.1939

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

MKS802/803/804/1602/1603/1604

1U rackmount Matrix KVM Switch

< 1.2 > KVM port connection

USB Servers

Combo KVM cable

support PS/2 or USB server

Combo KVM port

PS/2 Servers

Combo KVM cable

support PS/2 or USB server

6 / 10 / 15 ft Combo KVM cable

Support PS/2 or USB server

14628 Central Ave,

Chino, CA 91710

tel:909.597.7588, fax:909.597.1939

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

MKS802/803/804/1602/1603/1604

1U rackmount Matrix KVM Switch

< 1 .3 > Local console & remote console connection

C A T 5 / 6 c ab le

m a x. 15 0 m

C A T 5 / 6 c ab le

m a x. 15 0 m

R ece ive r

Remote

US B console 3

Remote

US B console 1

Re m ote

Ca t6

Cons ole 3

Loc al

US B

con s ole

Re m ote

Ca t6

Cons ole 1

R e mo te

Ca t6

C on sol e 2

C A T 5 / 6 c ab le

m a x. 15 0 m

R ece ive r

Remote

US B console 2

How to use a receiver to connect a remote console

Receiver

Front

Local

Computer Monitor Remote I/O

Power

Rear USB

K/B Mouse Local Remote

Button

KVM switch

The receiver provides a hotkey function for remote console.

Monitor

Remote

Console

Local computer

( Optional setup )

CE-6

Combo

KVM cable

VGA

cable

Cat6 cable

up to 150m

12V DC Power

Adapter

Front

Rear

< 1.4 > KVM Cascade

¦Cascade up to 8 levels, 240 servers

¦Cascading multiple KVM with CMC -8 cascade cable.

Cascaded KVMs from level 2 to 8 must be the models of M KS802 / 1602 or MKCS1602 / 3202.

When multiple matrix KVMs cascade together, the master KVM at level 1 will take all control of other

slave KVM switches (e.g. level 2 to 8).

The slave matrix KVM will be as a port expansion module of the master matrix KVM, the original

remote console on slave KVM will be sacrificed and disabled.

Master KVM

out in

Cascade

Slave KVM

level 2

To cascade IN port

MKS802

Slave KVM

level 3

Slave KVM

level 4

Slave KVM

level 5

MKS802

Slave KVM

level 6

Slave KVM

level 7

Slave KVM

level 8

MKS1602

¦8ft Matrix KVM cascade cable

< 1.5 > Specifications

MKS802 MKS803 MKS804

MKS1602 MKS1603 MKS1604

¯KVM Port

Number of ports: 8 or 16

Connector: Combo connector

Connectivity: Combo 4-in-1 KVM cable

up to 6, 10 & 15 feet

¯Local Console

Monitor port: 1 x DB-15 VGA (up to 1600 x 1200)

Keyboar d & mouse port: 2 x USB type connector for keyboard & mouse

¯Cat6 Remote Console

Number of remote port: 1 for MKS802 / 1602

2 for MKS803 / 1603

3 for MKS804 / 1604

Monitor port: DB15-pin VGA, up to 1600 x 1200

Keyboar d & mouse port: 2 x USB type connector for keyboard & mouse

Remote I/O: RJ45 via Cat5 / Cat5e / Cat6 cable up to 500 feet

¯Expansion: Up to 240 servers by 8-level cascade

¯Compatibility

Multi-platform: Mix PCs, SUN and Mac G3 / G4 Mac / iMac

Support: Windows 7 / Vista / 2003 / XP, Linux, Unix

¯Power

Input: AC power adapter

Consumption: Max. 48 Watt, Standby 5 Watt

¯Regulatory Approval: cUL, FCC, CE

¯Environmental

Operating: 0 to 50°C

Storage: -5 to 60°C

Relative humidity: 90%, non-condensing

Shock: 50G peak acceleration (11ms, half-sine wave)

Vibration: 58~100Hz / 0.98G (11ms / cycle)

¯Product Information

Dimension (W x D x H): 443 x 171 x 43.6 mm / 17.4 x 6.7 x 1.72 inch

Net weight: 3 kg / 6.5 lb

¯Packing Information

Dimension (W x D x H): 500 x 400 x 90 mm / 19.7 x 15.7 x 3.5 inch

Gross weight: 5 kg / 11 lb

14628 Central Ave,

Chino, CA 91710

tel:909.597.7588, fax:909.597.1939

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

MKS802/803/804/1602/1603/1604

1U rackmount Matrix KVM Switch

Part 2 . Usa ge

2.1 KVM Bu tton

P ower O N

¦T u r n o ff a ll serve rs a nd KV M switch es

¦M ake su re a ll ca ble s / con n ect ors are p ro pe rly co nn ecte d

¦Re com m en d P o we r ON se q ue n ce is m on ito r, K VM switc h fina lly co m p ut er

F ron t Panel - Port LED Indica tions

1 6 po rts

Ban k no . P C po r t LE D s Chan nel

b utton

B ank

b utto n

3 2 po rts

B a n k no . 7 - Seg m e n t B AN K L E D in dic a tion

P C p or t LE D s O nlin e :B lu e L E D o n in dica tin g a P C is co n ne c tin g t o t h e p ort

Ac tiv e :G ree n L E D o n in dica ting a se lect ed ch a nn e l

Re m ote :O rang e LE D o n in d ica tin g th e po rt is sele cting b y IP / re m o te co nso le

C h an ne l bu tt o n P re s s to se le c t ch an n e l fro m 0 1 to 32

B a n k bu tto n S e le c t th e b an k fr o m 1 to 8

2.2 Password

The password is enabled by default, the default password is “000000 00” eight zeros (Do not use “0” on

number pad)

¦Enable password

1. Press the KVM hotkey Scroll Lock + Scroll Lock + U

2. Logout the KVM by pressing the hotkey Scroll Lock + Scroll Lock + P

3. In SUPERVISOR level, enter “00000000” eight zeros in user name & password field

(Do not use “0” on number pad)

4. In USER level, press Space bar +Enter in user name & password field

Remark: Automatic logout after 10 minutes of inactivity

¦Set your own user name & password

1. Login the KVM in SUPERVISOR level by pressing “00000000” eight zeros in user name & password

field

2. Call KVM OSD menu by pressing the KVM hotkey Scroll Lock + Scroll Lock + Space Bar

3. Press F1 to the MAIN MENU

4. Select “USER SECURITY”

5. Set password in SUPERVISOR & USER level

a. In the left-top row “S” (SUPERVISOR), press Enter to set your own user name & password

b. In the row 1 to 8 (USER), press Enter to set your own user name & password

6. Press Enter to save the setting or press Esc to cancel the editing without any change

Remark: a. Blank has underscore, while SPACE doesn’t have

b. Press any alphanumeric key to move to next input item. S PACE is treated as a valid

character

¦Change your password

1. Login the KVM in SUPERVISOR level by pressing your own user name & pass word

2. Call KVM OSD menu by pressing the KVM hotkey Scroll Lock + Scroll Lock + Space Bar

3. Press F1 to the MAIN MENU

4. Select “USER SECURITY”

5. Change password in SUPERVISOR & USER level

a. In the left-top row “S” (SUPERVISOR), press Enter to change your user name & password

b. In the row 1 to 8 (USER), press Enter to change your user name & password

6. Press Enter to save the setting or press Esc to cancel the editing without any change

Remark: a. Blank has underscore, while SPACE doesn’t have

b. Press any alphanumeric key to move to next input item. SPACE is treated as a valid

character

¦Disable your password

1. Press the KVM hotkey Scroll Lock + Scroll Lock + U

2. Logout the KVM by pressing the KVM hotkey Scroll Lock + Scroll Lock + P

3. You don’t need user name & password to access the KVM OSD menu

¦Forget your password

Please contact your supplier for further support

Remark:

¦You must press the KVM hotkey within 2 seconds

¦A beep sound will be heard for successful entering KVM hotkey

2.3 KVM OSD

OSD Menu

OSD operation

next to the system name The PC is powered on

next to the system name The PC is selected

F1 Access F1 MAIN MENU

F2 Logout the OSD menu

F3 Previous menu

Esc Cancel / Quit

Enter Complete / Switch to selected port

Switch to previous or next port

PgUp/PgDn Switch to previous bank or next bank

Display port 01 ~ 08 / 09 ~ 16 / 17 ~ 24 / 25 ~ 32

1 / 2 / 3 / 4 Remark: Display port 17 ~ 32 for 32 port model only

F1 Main Menu

LANGUAGE

OSD language change

PORT NAME EDIT

Define port name

PORT SEARCH

Quick searching by port name

USER SECURITY

Change password

ACCESS LIST

Define user access authority

HOTKEY

Change hotkey

TIME SETTINGS

Modify scan display time interval

OSD MOUSE

Modify OSD mouse speed

Scroll Lock +Scroll Lock +

Space Bar

Calling OSD m enu

Right-button mouse +Esc

Calling OSD m enu

Port no.

Switch to specific port

Turn the buzzer ON and OFF

* Default the buzzer is ON

Logout the KVM if password security is

ON. Show up the status windows

Scroll Lock

Activate auto-scan mode for remote & local port

*The scan time interval is 5 seconds

Scroll Lock

Auto-adjust the video signal

2.4 KVM Hotkey & Remote Console Hotkey

Local Console Hotkey Function

Scroll Lock

Switch to previous port

Scroll Lock

Switch to next port

Scroll Lock

PgUp / PgDn

Switch to previous bank or next bank

Scroll Lock +Scroll Lock + Bank no.

Scroll Lock +Scroll Lock +B

Scroll Lock +Scroll Lock +P

Advance hotkeys (for Supervisor login only)

Scroll Lock +Scroll Lock +S

Scroll Lock +Scroll Lock +R

Activate auto-scan mode for connected

servers

*Press any key to exit the auto-scan

mode

Reset all the KVM settings to factory

default

*Except User Security settings

Scroll Lock +Scroll Lock +UDisable and enable password security

*Default security is ON

To enable / disable the screen saving

Scroll Lock +Scroll Lock +Lfunction and 10 minutes auto-logout

*Default the screen saving is OFF

Remarks: ¦Example of “Scroll Lock +Scroll Lock + Bank no. + Port no.”

-Bank No. : 1 to 8

-Port No. : 01 to 16

-e.g. Bank 1 Port 4 : Scroll Lock +Scroll Lock +1+0+4

-e.g. Bank 2 Port 16 : Scroll Lock +Scroll Lock +2+1+6

¦You must press the hotkey within 2 seconds

¦A beep sound will be heard for successful entering

¦The numeric keypad is not supported, while in OSD screen, the arrow keys, PgUp,

PgDn, and Enter keys are supports

Remote Console Hotkey Function

Scroll Lock

Toggle switch between remote & local port

Scroll Lock

Turn the buzzer ON & OFF

*Default the buzzer is ON

Acnodes MKS802 Manuale utente

Marca: Acnodes

Modello: MKS802

Categoria: Switch KVM

Tipo: Manuale utente

Questo manuale è adatto anche per

Scarica il pdf

rapporto

in altre lingue

English: Acnodes MKS802 User manual

Acnodes MKS802 Manuale utente

Questo manuale è adatto anche per

Acnodes MKS802 Manuale utente

in altre lingue

Documenti correlati

Altri documenti