- 21 -
chassis,pullthetwoleversonthehandlebarsupwards
(Fig.b);
2• atthesametime,liftthechassisanditwillopen
automatically (Fig.c). To make sure that the stroller is
correctlyopen,checkthetwosidehooks(Fig.d).
3• ASSEMBLING:tomountthefrontwheels,firstlycheck
thatthewasherispresent,asshowninthefigure,then
lowerleverAandslipwheelBonuntilitclicksintoplace.
4• To mount the rear wheels connected by the brake
cable,placethemwiththebrakefacingexternally(fig_a).
WARNING:ensurethehookshaveclickedintoplace,as
in figure b.
5• Finally,hookthecentralelementofthebrakecableonto
thechassis,ensuringitclicksintoplace,asinthefigure.
6• BASKET:tomountthebasket,sliptheloopsover
thefronthooksAandrearhooksBandC.Thefigure
shows the attached basket.
7• CUPHOLDER:Itcanbeappliedonthe4knobsonthe
chassis. Two are on the left or right side of the handle
andtwoonthesidesofthepushchair’schassis,atthe
heightofthebumper,ontherightorleft.Toapplythe
cupholder,attachitandpressuntilitclicksintoplace
(Fig. a).
ADJUSTINGTHEHANDLEBARS:Theheightofthetwo
handlebars can be adjusted to 3 positions. For the
higherposition,pressthebuttonwhilepullingthe
handlebarsupwards.Tolowerit,dotheopposite(Fig.b).
8• BRAKE:tosetthebrakesonthestroller,lowerthe
levers on the rear wheels with your foot (Fig.a). To
releasethebrakes,liftthelever.
Always set the brakes when the stroller is not moving.
SWIVELWHEELS:toswivelthefrontwheelslowerthe
levers as shown in arrow 1 (Fig.b).
WHEELSINSTATIONARYPOSITION:Tomakethem
stationary,pushtheleverintheoppositedirection,as
indicatedbyarrow2.
9• HOOD:tomountthehood,fastentheattachments
which are situated on the sides of the hood onto
thoseonthechassis,pushingoutwardsuntilthehood
clicks into place (Fig.a); fasten it onto the inside of the
armrest(Fig.b),
10•andontothebackrestofthestroller(Fig.c).Thehood
hasawindowenablingyoutoobserveyourchild,a
large and practical pocket (Fig.d) and a cord which
games can be hung on (Fig.e).
Toremovethehood:unhookthehood’sside
attachmentsfromthechassisbypullinginwards,
unbutton it from the inside of the armrest and from
the backrest of the stroller.
11•Youcandetachthebackpartofthefabricbyunzippingit
and use the hood also as a sun canopy (Fig.a). To reattach
thebackpartofthefabric,closethezipper(Fig.b).
12•Byloweringthestrollerbackrest,therearhood
extends and through the double zipper a window can
be created to allow more air to circulate and watch the
child when sleeping.
13•COVER: for complete Pliko P3 Compact:
Toputtheaprononthepushchair,doupthebuttons
on both sides and under the footrest (Fig. a). Pull the
cover upwards so that it covers the bumper bar (Fig.
b).Somemodelshaveamuffaswell,soputtingon
the cover may be a little different (Fig. c).
14• COVER: Pliko P3 Compact On Track :
Use the XL Carrycot apron because it fits onto the
PlikoP3Compactstandardcarseatandontothe
lie-flatcarseat.Pleasereadtheinstructionsfor
information on how to put it on the XL Carrycot.
Toputtheaprononthepushchair,widenitoutso
that it covers the child’s legs (Fig. a).
Pull it across the bumper bar and do up the buttons in
the front (Fig. b).
Slipthefootrestunderthecover,sticktheVelcro
strips together and do up the buttons (Fig. c) on the
lower part of the apron.
15•RAINCOVER(onlyfortheCLASSICPLIKOP3COMPACT
model):
tofittheraincanopy,extenditoverthestrollerand
snap fit the buttons on both sides of the hood (Fig.a).
Fasten the elastic loops including the chassis in the
lower part of the stroller (Fig.b).
• Donotusetheraincanopyindoorsandalwaysmake
sure that the child is not too hot.
• Donotplacetheraincanopynearheatsourcesand
pay attention to cigarettes.
• Makesurethattheraincanopydoesnotinterferewith
any moving mechanism of the stroller.
• Alwaysremovetheraincanopybeforefoldingupthe
stroller.
• Washwithaspongeandsoapywater.Donotuse
detergents.
16•5-POINTSAFETYHARNESS:tofasten,insertthetwo
buckles of the waist strap (with attached shoulder
straps,arrowa)intothelegdividerstrapuntilthey
clickintoplace(arrowb).Tounfastenthem,pressthe
button which is situated in the centre of the fastener
(arrow c) and pull the waist strap outwards (arrow d).
17•Totightenthewaiststrap,pullonbothsidesinthedirection
of the arrow (Fig.a). To loosen it do the opposite. The waist
strap can be tightened as far as the safety lock (Fig_b).
18•Toadjusttheheightofthesafetyharnesses,release
the two buckles on the rear of the backrest.
Pull the shoulder straps towards you (arrow a) until the
buckles are released and insert them in the backrest
loops (arrow b). Remove the shoulder straps from the
sack (arrow c) and insert them in the most appropriate
buckle(arrowd),thenreattachthetwobuckles
behind the backrest (arrow e). The buckles are securely
attached when a click is heard (fig f).
19•ADJUSTINGTHEFOOTREST:thefootrestcanbeadjusted
tothreepositions.Tolowerthefootrest,pullthetwo
side levers downwards while lowering the footrest. To
liftthefootrest,pullitupwardsuntilitclicksintoplace.
20•ADJUSTINGTHEBACKREST:thebackrestreclinesto
fourdifferentpositions.Tolowerthebackrest,liftthe
handlewhileloweringthebackrest,lockingitinthe
desiredposition.Toraiseit,pullthebackrestupwards.
21•FRONTBAR: tofastenthefrontbar,slipbothendsof
the front bar into the armrests until it clicks into place.
22•The front bar can be opened to one side only to allow
the child to get in and out of the stroller easier when he
orsheisolder.Toopenthefrontbar,pressthebutton
under the armrest while pulling out the front bar (Fig.a).
Toremovethefrontbar,pressthetwobuttonsunder
the armrests while pulling out the front bar (Fig.b).
23•OnlyforthecompletePlikoP3CompactandOnTrack
PlikoP3 Compactmodels:
when you remove the bumper bar insert the two tops
in order to close the armrests of the chassis.
24•REARLEDGE:therearledgehelpsthemother
overcome small bumps and can also be used to carry a
second child (fig_a).