Tascam US-2x2 Manuale del proprietario

Marca: Tascam

Modello: US-2x2

Categoria: Apparecchiature musicali supplementari

Tipo: Manuale del proprietario

Questo manuale è adatto anche per

us-4x4

D01236100C

US-2x2

US-4x4

USB Audio/MIDI Interface

ENGLISH

FRANÇAIS

ESPAÑOL

DEUTSCH

ITALIANO

日本語

OWNER'S MANUAL

MODE D’EMPLOI

MANUAL DEL USUARIO

BEDIENUNGSANLEITUNG

MANUALE DI ISTRUZIONI

取扱説明書

TASCAM US-2x2/US-4x4

http://tascam.jp/

〒206-8530　東京都多摩市落合1-47

TEAC AMERICA, INC.

http://tascam.com/

Phone: +1-323-726-0303

1834 Gage Road, Montebello, California 90640

USA

TEAC MEXICO, S.A. de C.V.

http://teacmexico.net/

Phone: +52-55-5010-6000

Río Churubusco 364, Colonia Del Carmen, Del-

egación Coyoacán, CP 04100, México DF, México

TEAC UK LIMITED

http://tascam.eu/

Phone: +44-8451-302511

Meridien House, Ground Floor,69 - 71, Clarendon

Road, Watford, Hertfordshire, WD17 1DS, UK

TEAC EUROPE GmbH

http://tascam.eu/

Phone: +49-611-71580

Bahnstrasse 12, 65205 Wiesbaden-Erbenheim,

Germany

TEAC SALES & TRADING(SHENZHEN) CO.,

LTD

http://tascam.cn/

Phone: +86-755-88311561~2

Room 817, Block A, Hailrun Complex, 6021 Shen-

nan Blvd., Futian District, Shenzhen 518040, China

• TASCAM is a trademark of TEAC CORPORATION,

registered in the U.S. and other countries.

• Microsoft, Windows, Windows 7, Windows 8 and

Windows Media are either registered trademarks

or trademarks of Microsoft Corporation in the

United States and/or other countries.

• Apple, Macintosh, Mac OS, Mac OS X and

Lightning are trademarks of Apple Inc.

• IOS is a trademark or registered trademark of

Cisco in the U.S. and other countries and is used

under license.

• Cakewalk is a registered trademark or trademark

and SONAR LE is a trademark of Cakewalk, Inc.

• Ableton and the Ableton logo are trademarks of

Ableton AG.

• ASIO is a trademark and software of Steinberg

Media Technologies GmbH. VST is a trademark

of Steinberg Media Technologies GmbH.

• Other company names, product names and

logos in this document are the trademarks

or registered trademarks of their respective

owners.

TASCAM US-2x2/US-4x4

Owner's Manual

IMPORTANT SAFETY PRECAUTIONS

INFORMATION TO THE USER

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful inter-

ference in a residential installation. This equipment

generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance

with the instruction manual, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment

off and on, the user is encouraged to try to correct

the interference by one or more of the following

measures.

a) Reorient or relocate the receiving antenna.

b) Increase the separation between the equipment

and receiver.

c) Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

d) Consult the dealer or an experienced radio/TV

technician for help.

CAUTION

Changes or modifications to this equipment not

expressly approved by TEAC CORPORATION for

compliance could void the user’s authority to operate

this equipment.

For U.S.A.

For Canada

THIS CLASS B DIGITAL APPARATUS COMPLIES WITH

CANADIAN ICES-003.

CET APPAREIL NUMERIQUE DE LA CLASSE B EST

CONFORME A LA NORME NMB-003 DU CANADA.

DECLARATION OF CONFORMITY

We, TEAC EUROPE GmbH. Bahnstrasse

12, 65205 Wiesbaden-Erbenheim,

Germany declare in own responsibility,

the TEAC product described in this

manual is in compliance with the corresponding

technical standards.

Declaration of Conformity

Responsible party: TEAC AMERICA, INC.

Address: 1834 Gage Road, Montebello,

California, U.S.A.

Telephone number: 1-323-726-0303

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

IMPORTANT SAFETY INSTRUCTIONS

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8 Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding

type plug has two blades and a third grounding

prong. The wide blade or the third prong are

provided for your safety. If the provided plug does

not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10 Protect the power cord from being walked on or

pinched particularly at plugs, convenience recep-

tacles, and the point where they exit from the

apparatus.

11 Only use attachments/accessories specified by the

manufacturer.

12 Use only with the cart, stand,

tripod, bracket, or table

specified by the manufacturer,

or sold with the apparatus.

When a cart is used, use

caution when moving the cart/apparatus combi-

nation to avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or

when unused for long periods of time.

14 Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

TASCAM US-2x2/US-4x4

been exposed to rain or moisture, does not operate

normally, or has been dropped.

• The apparatus draws nominal non-operating

power from the AC outlet with its POWER or

STANDBY/ON switch not in the ON position.

• The mains plug is used as the disconnect device,

the disconnect device shall remain readily

operable.

• Caution should be taken when using earphones

or headphones with the product because

excessive sound pressure (volume) from

earphones or headphones can cause hearing

loss.

• If you are experiencing problems with this

product, contact TEAC for a service referral. Do

not use the product until it has been repaired.

CAUTION

• Do not expose this apparatus to drips or

splashes.

• Do not place any objects filled with liquids, such

as vases, on the apparatus.

• Do not install this apparatus in a confined space

such as a book case or similar unit.

• The apparatus should be located close enough

to the AC outlet so that you can easily grasp the

power cord plug at any time.

• If the product uses batteries (including a battery

pack or installed batteries), they should not be

exposed to sunshine, fire or excessive heat.

• CAUTION for products that use replaceable

lithium batteries: there is danger of explosion

if a battery is replaced with an incorrect type

of battery. Replace only with the same or

equivalent type.

For European Customers

Disposal of electrical and electronic

equipment

(a) All electrical and electronic equipment should be

disposed of separately from the municipal waste

stream via designated collection facilities appointed

by the government or the local authorities.

(b) By disposing of the electrical and electronic

equipment correctly, you will help save valuable

resources and prevent any potential negative

effects on human health and the environment.

serious effects on the environment and human

health as a result of the presence of hazardous

substances in electrical and electronic

equipment.

(d) The crossed out wheeled dust bin

symbol indicates that electrical and

electronic equipment must be collected

and disposed of separately from household waste.

(e) The return and collection systems are available to

the end users. For more detailed information about

disposal of old electrical and electronic equipment,

please contact your city office, waste disposal

service or the shop where you purchased the

equipment.

Contents

Introduction ............................................................................5

Included items .......................................................................5

Note about the Reference Manual .................................5

Precautions for placement and use ...............................5

Using the TEAC Global Site ...............................................5

Beware of condensation ....................................................5

Cleaning the unit ..................................................................6

User registration ....................................................................6

Names and functions of parts ..........................................6

Front panel ........................................................................................ 6

Rear panel .......................................................................................... 7

Installing the dedicated software ..................................7

Installing the dedicated driver for Windows ............... 7

Installing the Settings Panel for Mac OS X ....................8

Uninstalling the dedicated software ............................9

Uninstalling the dedicated driver for Windows ........ 9

Uninstalling the Settings Panel for Mac OS X ............. 9

Connecting the power ..................................................... 10

Making settings on the Settings Panel screen ....... 11

Connecting other equipment ....................................... 11

Connecting with iOS devices ........................................ 12

Adjusting the input sound ............................................. 12

Troubleshooting ................................................................. 12

Specifications ...................................................................... 14

Ratings............................................................................................... 14

Analog inputs ............................................................................... 14

Analog outputs ........................................................................... 14

Control input/output ratings ............................................. 14

Audio performance .................................................................. 14

Computer system requirements .................................. 15

Windows ...........................................................................................15

Mac OS X...........................................................................................15

Apple iOS devices .......................................................................15

Supported audio drivers ........................................................15

General...................................................................................16

Dimensional drawings .....................................................16

TASCAM US-2x2/US-4x4

Introduction

Thank you for your purchase of the TASCAM US-2x2/

US-4x4 USB Audio/MIDI Interface.

Before connecting and using this unit, please take

time to read this manual thoroughly to ensure you

understand how to properly set it up and connect

it, as well as how to use its many useful and conve-

nient functions. After you have finished reading

this manual, please keep it in a safe place for future

reference.

Should the contents of the memory of a connected

device (including hard disks and optical discs) in

the same system as this unit be lost, our company

will bear no responsibility for repair, including for

compensation.

Before connecting this unit to a computer, you

must download and install a dedicated driver.

Included items

This product includes the following items.

Keep the packing materials for transportation in the

future.

Please contact TASCAM Customer Support (see page

2) if any of these items are missing or have been

damaged during transportation.

• Main unit ................................................................... × 1

• AC adapter (GPE248-120200-Z)

(included with US-4x4 only) ...............................× 1

• USB cable ..................................................................× 1

• SONAR LE (for Windows) installation guide .× 1

• Ableton Live Lite installation guide .................× 1

• Owner’s Manual (this document)

including warranty ................................................× 1

CAUTION

Always use the included AC adapter (GPE248-

120200-Z) with the US-4x4. Never use the

included AC adapter with any other device.

Doing so could cause damage, fire or electric

shock.

Note about the Reference Manual

This Owner's Manual explains the main functions of

this unit. Please see the Reference Manual for infor-

mation about all the unit's functions.

You can also download this Owner's Manual and the

Reference Manual from the TEAC Global Site (http://

teac-global.com/).

Precautions for placement and use

• The operating temperature range of this unit is

5–35 °C.

• Do not install this unit in the following types

of locations. Doing so could make the sound

quality worse or cause malfunction.

Locations with frequent vibrations

Near windows or other places exposed to

direct sunlight

Near heating equipment or in other locations

that become very hot

Extremely cold places

Very humid or poorly ventilated locations

Very dusty locations

• To enable good heat dissipation, do not place

anything on top of the unit.

• Do not place this unit on top of a power

amplifier or other device that generates heat.

Using the TEAC Global Site

You can download the Owner’s Manual necessary for

this unit from the TEAC Global Site (http://teac-global.

com/).

1. Open the TEAC Global Site (http://teac-global.

com/).

2. In the TASCAM Downloads section, click the

desired language to open the Downloads

website page for that language.

NOTE

If the desired language does not appear, click

Other Languages.

3. Click the product name in the “Search by Model

Name” section to open the Downloads page for

that product.

4. Select and download the Owner’s Manual that

are needed.

Beware of condensation

Condensation could occur if the unit is moved from

a cold place to a warm place, it is used immediately

after a cold room has been heated or it is otherwise

exposed to a sudden temperature change.

To prevent this, or if this occurs, let the unit sit for one

or two hours at the new room temperature before

using it.

TASCAM US-2x2/US-4x4

Cleaning the unit

To clean the unit, wipe it gently with a soft dry cloth.

Do not wipe with chemical cleaning cloths, benzene,

thinner, alcohol or other chemical agents. Doing so

could damage the surface or cause discoloration.

User registration

Customers in the USA, please visit the TASCAM

website (http://tascam.com/) to register as a user

online.

Names and functions of parts

Front panel

US-4x4 front panel US-2x2 front panel

w78 90q

12 34

4 5

q w

1 SIG indicators

The SIG indicators light green when signals (of

at least −32 dBFS) are input through the IN1/IN2

jacks (and US-4x4 IN3/IN4 jacks).

2 PEAK indicators

The PEAK indicators light red when signals that

are about to distort (−1 dBFS or higher) are input

through the IN1/IN2 jacks (and US-4x4 IN3/IN4

jacks).

3 GAIN knobs

Use to adjust the input levels of the IN1/IN2 jacks

(and US-4x4 IN3/IN4 jacks).

4 USB indicator

This lights when the USB connection is working.

5 LINE OUT knob

Use to adjust the output level of the LINE OUT

1-2 jacks.

6 PHONES knob

Use to adjust the output level of the PHONES jack

( 1 and 2 jacks on US-4x4).

CAUTION

Before connecting headphones, minimize the

volume with the PHONES knob. Failure to do so

might cause sudden loud noises, which could

harm your hearing or result in other trouble.

7 Phantom power switch/indicator

Use this switch to provide +48V phantom power

to the IN1/IN2 jacks (and US-4x4 IN3/IN4 jacks).

The indicator lights when the phantom power

switch is set to +48V.

8 IN1/IN2 (BALANCED/UNBALANCED) jacks

These input jacks are XLR/TRS combo jacks on

the US-2x2 and separate XLR and standard TRS

jacks on the US-4x4.

Use the MIC/LINE INST switches on the front

of the unit to enable balanced line (MIC/LINE)

input or unbalanced (INST) input for the XLR/TRS

combo jacks and standard TRS jacks.

9 IN3/IN4 (BALANCED) jacks

These XLR analog mic input and standard line

level TRS jacks are balanced input jacks.

CAUTION

On the US-4x4, the IN1–IN4 (8, 9) inputs each

have two jacks (XLR and TRS). Do not input

signals through both jacks of the same input at

the same time. If signals are input through both

at the same time, neither signal will be received

properly.

0 MIC/LINE INST switches

Set according to the IN1/IN2 jack input sources.

Set to MIC/LINE when connecting electronic

instruments, audio devices, mics and similar

equipment. Set to INST when connecting an

electric guitar, electric bass or other equipment

with high output impedance.

TASCAM US-2x2/US-4x4

q MONITOR BALANCE knob

Use this to adjust the balance between the mixed

computer output and the mix of signals input

through the unit's input jacks.

w PHONES jack

Use this standard stereo phone jack to connect

stereo headphones( 1 and 2 jacks on US-4x4).

Each of these jacks outputs the same signal

as the LINE OUT 1–2 jacks. Use an adapter to

connect headphones with a mini plug.

Rear panel

US-4x4 rear panel US-2x2 rear panel

eryt

e rt

y u

e LINE OUT (BALANCED) jacks

These standard TRS jacks are analog line outputs.

The signals output from the LINE OUT 1–2 jacks

(1–4 jacks on US-4x4) can be set in the Settings

Panel. For details, see “5 Line Output items” in

“6 – Settings Panel settings” of the Reference

Manual.

r MIDI OUT connector

This 5-pin DIN is a standard MIDI output

connector.

This outputs MIDI signals.

t MIDI IN connector

This 5-pin DIN is a standard MIDI input connector.

Use this to input MIDI signals.

y USB port

Use the included USB cable to connect the unit

to a computer or an iOS device. (Supports USB

2.0.)

u DC IN 5V connector (US-2x2 only)

To use this unit when connected to an iOS device,

connect a DC5V TASCAM PS-P520 adapter here

(sold separately).

i DC IN 12V connector (US-4x4 only)

Connect the included DC12V AC adapter

(GPE248-120200-Z) here.

Installing the dedicated software

To use this unit, a dedicated software must be

installed on a computer.

Download the latest dedicated software for the

operating system you are using from the TEAC Global

Site (http://teac-global.com/).

• With a Windows computer, when you install the

included driver, a Settings Panel application will

also be installed at the same time.

• With a Mac, you only need to install the Settings

Panel application. The standard OS driver will

be used.

• With an iOS device, the standard OS driver

will be used, so there is no need to install any

software.

CAUTION

Before starting to install software, quit other

applications.

Installing the dedicated driver for

Windows

CAUTION

•

Complete installation of the driver on the

computer before connecting the unit to it with

the USB cable.

•

If you already connected the unit to the

computer using the USB cable, and the Found

New Hardware Wizard launched, close the

Wizard and disconnect the USB cable.

Driver installation procedures

1. Download the latest driver for the operating

system you are using from the TEAC Global Site

(http://teac-global.com/) and save it on the

computer to be used with the unit.

2. Uncompress the saved driver (zip file) on the

computer desktop or another location.

3. When uncompressed, separate folders are

created for 32-bit and 64-bit versions. To

TASCAM US-2x2/US-4x4

launch the installer software, double-click the

“US-2x2_US-4x4_ InstallerXX.exe” exe file (“XX”

is the number of bits) that is suitable for the OS

being used.

4. When a “Security Warning” or “User Account

Control” screens appear, click the “Run” or “Yes”

button.

5. Next, select the desired language and click the

“OK” button.

6. When the Installshield Wizard screen appears,

click the “Next” button.

7. Read the contents of the License Agreement,

and select “I accept the terms in the license

agreement” if you agree to the terms.

Then, click the “Next” button.

8. Next, click the “Install” button to start installation.

9. The following screen appears when installation

has completed.

Click the “Finish” button.

CAUTION

After installing the driver software, device

driver installation will be completed the first

time the unit is connected to the computer by

USB. At this time, Windows will automatically

search Windows Update, so it might take some

time before the computer recognizes that the

unit is connected. If the computer still does not

recognize the unit after some time, open the

software installer screen from the notification

area at the bottom right of the computer display.

Click “Skip obtaining driver software from

Windows Update.” to stop the search.

Installing the Settings Panel for Mac

OS X

NOTE

•

Install the Settings Panel on the computer before

connecting the unit to it with the USB cable.

•

Depending on the Gatekeeper setting, a warning

message might appear during installation. For

information about Gatekeeper, see “Note about

Gatekeeper” in “3–Installation” of the Reference

Manual.

Settings Panel installation procedures

1. Download the latest Settings Panel for the

operating system you are using from the TEAC

Global Site (http://teac-global.com/) and save it

on the computer to be used with the unit.

2. Double-click “US-2x2_US-4x4 Installer.dmg”,

which is the saved disk image file for the driver,

and double-click “US-2x2_US-4x4 Installer.pkg”

inside the folder that opens.

NOTE

Depending on the computer’s settings, the

downloaded zip file might not have been

uncompressed automatically. In this case,

uncompress the zip file first and then double-

click the disk image file.

3. When the installer starts, click the “Continue”

button.

TASCAM US-2x2/US-4x4

4. Next, select the desired language and click the

“Continue” button.

5. Click the “Read License” button and check the

contents of the Software License Agreement.

If you agree to the contents of the license, click

“A g r e e”.

Then, click the “Next” button.

6. Next, click the “Install” button to start installation.

7. The following screen appears when installation

has completed. Click the “Close” button.

Uninstalling the dedicated software

NOTE

Normally, there is no need to uninstall the

dedicated software. Follow these procedures if

a problem occurs or you no longer intend to use

the unit with the computer.

Uninstalling the dedicated driver for

Windows

1. Double-click the “US-2x2_US-4x4_InstallerXX.

exe” file used for installation. When a “Security

Warning” or “User Account Control” screen

appears, click the “Run” or “Yes” button.

2. Next, the Installshield Wizard will launch.

Click the “Next” button.

3. When the “Program Maintenance” screen opens,

select “Remove” and click the “Next” button.

4. When the “Remove that Program” screen opens,

click the “Remove” button.

5. The following screen appears when uninstal-

lation has completed. Click the “Finish” button.

Uninstalling the Settings Panel for Mac

OS X

Delete “US-2x2_US-4x4_Settings Panel” from the

Applications folder to complete uninstallation.

TASCAM US-2x2/US-4x4

Connecting the power

US-4x4

Use the included 12V AC adapter (GPE248-120200-Z)

to connect a power supply to the unit as shown

below.

The AC adapter for the US-4x4 includes two types of

outlet plugs. Attach the type of plug that matches the

power outlet that you are using. Please see “Changing

the outlet plug” in the Reference Manual for instruc-

tions about how to do this.

Power outlet

GPE248-120200-Z (included)

DC plug

Changing the outlet plug (US-4x4 only)

1 Move the latch on the AC adapter in the direction

of the arrow.

2 Pull off the outlet plug.

3 Replace it with the other outlet plug (A or B).

4 Move the latch on the AC adapter in the direction

of the arrow again.

5 Attach the outlet plug to the AC adapter.

This completes changing the outlet plug.

After changing the outlet plug, confirm that

is not loose or crooked and that everything is

normal before plugging it into an outlet

CAUTION

Do not use the adapter if there is anything

abnormal about the plug after changing it. Use

when the plug is abnormal could cause fire or

electric shock. Contact the retailer where you

purchased the unit or a TEAC service center (see

page 2) to request repair.

US-2x2

Normally, when a US-2x2 is connected to a computer,

it will operate using USB bus power, so a separate

power supply is not necessary. However, when

using the unit connected to an iOS device or when

not using USB bus power, a separate AC adapter

designed for use with this unit (TASCAM PS-P520,

DC5V) is necessary. In this case, connect the power

source to the unit as shown below.

DC plug

Power outlet

TASCAM

PS-P520 (sold separately)

CAUTION

Always use the AC adapter designed for use

with the unit: GPE248-120200-Z for the US-4x4

or TASCAM PS-P520 for the US-2x2. Using a

different AC adapter could cause malfunction,

overheating, fire or other problems.

TASCAM US-2x2/US-4x4

Making settings on the Settings

Panel screen

Windows

From “All Apps” (All Programs), select “TASCAM US-2x2

& US-4x4 Settings Panel” under TASCAM.

Mac OS X

Select “TASCAM US-2x2 & US-4x4 Settings Panel” from

the Applications folder and launch it to open the

mixer panel on the computer display.

Windows Settings Panel screen

Mac Settings Panel screen

1 Direct Monitor Settings Input 1-2

Set the monitoring signal for the IN1/IN2 jacks to

Mono or Stereo.

2 Direct Monitor Settings Input 3-4 (US-4x4

only)

Set the monitoring signal for the IN3/IN4 jacks to

Mono or Stereo.

3 Audio Input On/Off

Turn input on/off for each channel separately.

4 Line Outputs 1-2

Select the signals to be output from the LINE

OUT (BALANCED) 1/2 and PHONES ( 1 and 2

jacks on US-4x4) jacks.

Options

Monitor: The signals input from all the input

connectors and the signals sent from the

computer by USB are mixed by the mixer and

output.

Computer 1-2: Only the signals sent from the

computer by USB are output.

5 Line Outputs 3-4 (US-4x4 only)

Select the signals to be output from the LINE

OUT (BALANCED) 3/4.

Options

Monitor: The signals input from all the input

connectors and the signals sent from the

computer by USB are mixed by the mixer and

output.

Computer 3-4: Only the signals sent from the

computer by USB are output.

For details about other settings, see “Settings Panel

screen” in “6 – Using the Settings Panel” of the

Reference Manual.

Connecting other equipment

Examples of connections to a US-4x4 (front)

Bass Guitar

Guitar

Headphones

Vocal mic

Examples of connections to a US-4x4 (back)

Powered speakers with

balanced connections

Drum machine Computer

USB-B

plug

CAUTION

•

Before making connections, turn this unit and all

equipment to be connected off (standby).

•

The phantom power affects both US-2x2 input

channels (all four US-4x4 input channels) simul-

taneously. Do not turn phantom power on when

connecting a mic that does not require phantom

power.

•

Turning phantom power on when a dynamic mic

or other mic that does not require it is connected

could damage this unit and connected

equipment.

•

Do not connect or disconnect mics while

phantom power is on. Doing so could cause

a loud noise and might damage this unit and

connected equipment.

•

Set the LINE OUT and PHONES knobs to their

minimum values before turning phantom

TASCAM US-2x2/US-4x4

power on/off. Depending on the connected

mics, sudden loud noises from monitoring

equipment could occur, and this could damage

the equipment or harm hearing.

•

Supplying phantom power to some ribbon mics

will break them. If you are unsure, do not supply

phantom power to a ribbon mic.

Connecting with iOS devices

US-2x2: You will need a Lightning to USB Camera

Adapter

and an AC adapter (sold separately).

US-4x4: You will need a Lightning to USB Camera

Adapter.

1 You must obtain a genuine Apple Lightning to USB

Camera Adapter separately.

DC5V TASCAM PS-P520 AC adapter (sold separately)

Adjusting the input sound

Analog audio signals input into this device from mics,

guitars, keyboards and other audio equipment can be

converted into digital signals and transmitted to the

computer via USB.

You can use the features of this unit to adjust the

digital signals that are sent to the computer.

In addition, by connecting speakers (through an

amplifier if not powered) or headphones to this unit,

you can monitor audio signals that are input to this

unit and output from the computer.

Use the various controls on the front of the unit as

necessary while listening to the input sound.

Example using a US-4x4

512

Use the GAIN knobs (4) to adjust the analog input

levels of the IN1/IN2 jacks (1) or IN3/IN4 jacks (2,

US-4x4 only) so that the PEAK indicators (3) above

and to the right of the knobs do not light.

To listen to the monitoring signal using headphones,

connect the headphones to the PHONES jack (5)

and adjust the PHONES knob (6).

NOTE

If you cannot hear the input sound through the

headphones or the LINE OUT (BALANCED)

jacks, check the settings of the MONITOR

BALANCE knob on the front of the unit and the

Line Outputs item on the Settings Panel screen.

Troubleshooting

Please read this chapter if you are unable to use the

unit properly even after setting it up following the

procedures in this manual.

If you are still unable to resolve your problems please

contact the store where you bought the unit or TEAC

customer support with the following information

about the operating environment and details about

the trouble.

Operating environment

• Computer manufacturer

• Model

• CPU

• Memory (RAM)

• Operating system

• Applications used

• Antivirus software

• Wireless LAN use

See page 2 of this document for contact information.

I cannot install the dedicated software.

1. Check the operating system

The operating system being used might not

be compatible with the software that you are

trying to install. Check the compatible operating

system of the software you are trying to install

again.

2. Stop software running in the background

Antivirus software and other software that runs

in the background can prevent installation. Quit

software that runs in the background and try

installation again.

The unit is connected, but the computer

does not recognize it.

1. Install the dedicated software

Install the dedicated software. See "Installing the

dedicated software" on page 76.

2. Change the USB port

• This unit cannot be used with USB 1.1. Use a USB

2.0 or USB 3.0 port.

• Do not use a USB hub with this unit. Always

connect the unit directly to a USB port on the

computer.

• If the above methods do not resolve the

problem, connect the unit to a different USB

port on the computer.

I cannot hear any sound even when audio

is played back on the computer.

Confirm that the MONITOR BALANCE knob on

the unit is not turned all the way to the left (toward

TASCAM US-2x2/US-4x4

INPUT). If that is the case, turn the MONITOR

BALANCE knob to the right of center.

In addition, check the status of the unit's connection

with the computer.

Moreover, if you make the following settings, sound

will be output through this unit, but no sound will

be output by the computer’s speakers or headphone

jack.

Windows 8/Windows 7

• See the “Windows 8” or “Windows 7” instructions

in the “Windows Media Player” section of “8 –

Application guide” in the Reference Manual, and

make settings as necessary for the OS.

Conduct procedures 1–4 for Windows 8 or

procedures 1–3 for Windows 7 to set the default

device for playback.

Mac OS X

1. Quit all applications and open “System Prefer-

ences…” from the Apple menu.

2. Open “Sound”.

3. On the Output tab, select “US-2x2” or “US-4x4”.

After completing the setting, restart the

computer and check the sound of playback.

Depending on the application that you are

using, you might need to make additional device

settings.

In particular, DAW software operates using audio

engines with settings that are different from the

OS settings, so confirm the DAW driver settings

first after installing the software for this unit.

Please see the manuals for the applications that

you are using for detailed setting procedures.

Sound breaks up or there is noise.

The processing load on the computer causes sound

to break up and noise to occur.

Here are some methods to reduce the load on the

computer.

1. A wireless LAN and software running in the

background, including antivirus software,

regularly put processing loads on the computer,

which can cause sound to break up and other

noise.

Stop wireless LAN transmission, antivirus

software and other software running in the

background when using this unit.

2. Set the buffer size (latency) in the audio appli-

cation that you are using or in this unit's Settings

Panel to a larger value.

NOTE

Consult the maker of the audio application that

you are using for methods to reduce its load on

your computer.

3. Change the settings of your computer so that

they are optimal for audio processing.

Windows 8

1. In Windows 8, right-click the ordinary start

screen (Metro user interface screen) and then

click “All apps”.

2. Right-click “Computer” and select

“Properties”.

3. Click “Advanced system settings”.

4. Click “Settings” in the “Performance” section

of the “Advanced” tab of the “System

Properties” window.

5. In the “Visual Effects” tab of the “Performance

Options” window, select “Adjust for best

performance”.

Windows 7

a) Turn Aero off.

1. Right-click the desktop and select “Person-

alize”.

2. Select a “Basic” or “High Contrast” theme.

b) Performance settings

1. Right-click “Computer” and select

“Properties”.

2. Click “Advanced system settings”.

3. Click “Settings” in the “Performance” section

of the “Advanced” tab of the “System

Properties” window.

4. In the “Visual Effects” tab of the “Performance

Options” window, select “Adjust for best

performance”.

Mac OS X

1. Open “System Preferences…” from the Apple

menu, and select “Energy Saver”.

2. Set “Computer sleep” to “Never”.

3. Set “Display sleep” to “Never”.

NOTE

Depending on the Mac OS X version and

Macintosh computer model, this setting might

not be available.

SONAR LE support

Our company does not provide support for SONAR

LE.

Please refer to the SONAR LE help menu for instruc-

tions about using the application.

Ableton Live Lite support

Our company does not provide support for Ableton

Live Lite. Please refer to the Ableton Live Lite help

menu for instructions about using the application.

TASCAM US-2x2/US-4x4

Specifications

Ratings

Sampling frequencies

44.1, 48, 88.2, 96 kHz

Quantization bit depth

16/24-bit

Analog inputs

Mic inputs (Balanced)

US-2x2: IN 1-2

US-4x4: IN 1-4

Connectors: XLR-3-31 equivalent (1: GND, 2: HOT,

3: COLD)

Input impedance: 2.2 kΩ

Rated input level (gain knob at MAX): −65 dBu

(0.0004 Vrms)

Rated input level (gain knob at MIN): −8 dBu

(0.3090 Vrms)

Maximum input level: +8 dBu (1.9467 Vrms)

Gain range: 57 dB

Instrument inputs (Unbalanced)

IN 1-2

(MIC/LINE INST switch set to INST)

Connectors: 6.3mm (1/4") standard TS jacks

(Tip: HOT, Sleeve: GND)

Input impedance: 1 MΩ or more

Rated input level (gain knob at MAX): −63 dBV

(0.0007 Vrms)

Rated input level (gain knob at MIN): −6 dBV

(0.5015 Vrms)

Maximum input level: +10 dBV (3.162 Vrms)

Gain range: 57 dB

Line inputs (Balanced)

US-2x2: IN 1-2

US-4x4: IN 1-4

(MIC/LINE INST switch set to MIC/LINE)

Connectors: 6.3mm (1/4") standard TRS stereo

jacks

(Tip: HOT, Ring: COLD, Sleeve: GND)

Input impedance: 10 kΩ

Rated input level (gain knob at MAX):−53 dBu

(0.0017 Vrms)

Rated input level (gain knob at MIN): +4 dBu

(1.228 Vrms)

Maximum input level: +20 dBu (7.75 Vrms)

Gain range: 57 dB

Analog outputs

Outputs (LINE OUT (BALANCED))

US-2x2: LINE OUT 1-2

US-4x4: LINE OUT 1-4

Connectors: 6.3mm (1/4") standard TRS stereo

jacks

(Tip: HOT, Ring: COLD, Sleeve: GND)

Output impedance: 110 Ω

Rated output level: +4 dBu (1.273 Vrms)

Maximum output level: +20 dBu (7.75 Vrms)

Headphones output (PHONES)

Connector: 6.3mm (1/4") standard stereo jack

Maximum output

US-2x2: 18 mW + 18 mW or higher (THD+N

0.1% or less, into 32 Ω load)

US-4x4: 45 mW + 45 mW or higher (THD+N

0.1% or less, into 32 Ω load) ( 1 and 2 total)

Control input/output ratings

MIDI IN connector

Connector: 5-pin DIN

Format: standard MIDI

MIDI OUT connector

Connector: 5-pin DIN

Format: standard MIDI

USB

Connector: 4-pin USB B-type

Transfer rate: USB 2.0 High Speed (480 Mbps)

Audio performance

Mic preamp EIN (equivalent input noise)

−127 dBu or less (150Ω termination with gain

knob at MAX)

Frequency response

IN 1-4 to LINE OUT(BALANCED), PHONES

44.1kHz, 48kHz

20Hz : +0 dB/

−

0.3 dB (JEITA)

20kHz : +0 dB/

−

0.1 dB (JEITA)

20kHz : +0 dB/−0.5 dB (PHONES output, JEITA)

88.2 kHz, 96 kHz

20Hz : +0 dB/

−

0.3 dB (JEITA)

40kHz : +0 dB/

−

0.2 dB (JEITA)

40kHz : +0 dB/−2.0 dB (PHONESoutput, JEITA)

S/N ratio

101 dB or more (MIC/LINE IN to LINE OUT, gain

knob at MIN, JEITA)

TASCAM US-2x2/US-4x4

Distortion

0.003% or less (MIC/LINE IN to LINE OUT, 1 kHz

sine wave, Rated input level, maximum output

level, JEITA)

Crosstalk

95 dB or more (MIC/LINE IN w LINE OUT, 1kHz,

JEITA)

Computer system requirements

Check the TEAC Global Site (http://teac-global.

com/) for the latest information about supported

operating systems.

Windows

Supported operating systems

Windows 8 (including 8.1) 32-bit

Windows 8 (including 8.1) 64-bit

Windows 7 32-bit SP1 or later

Windows 7 64-bit SP1 or later

(Windows Vista and Windows XP are not

supported)

Computer hardware requirements

Windows computer with a USB 2.0 port

CPU/processor speed

2 GHz or faster dual core processor (x86)

Memory

2 GB or more

CAUTION

Operation of this unit was confirmed using

standard computers that meet the above

requirements. This does not guarantee

operation with all computers that meet the

above requirements. Even computers that meet

the same system requirements might have

processing capabilities that differ according to

their settings and other operating conditions

Mac OS X

Supported operating systems

OS X Yosemite (10.10 or later)

OS X Mavericks (10.9.1 or later)

OS X Mountain Lion (10.8.4 or later)

Computer hardware requirements

Apple Macintosh computer with a USB 2.0 port

CPU/processor speed

2 GHz or faster dual core processor

Memory

2 GB or more

Apple iOS devices

Apple iOS device running iOS 7 or later

Supported audio drivers

Windows: ASIO2.0, WDM, MIDI

Mac: Core Audio, Core MIDI

TASCAM US-2x2/US-4x4

General

Power

US-2x2: Supplied by computer over USB*

US-4x4: Dedicated AC adapter (GPE248-

120200-Z), DC12V

*When using with an iOS device, a separate AC

adapter designed for use with this unit (TASCAM

PS-P520, DC5V) is necessary.

Power consumption

US-2x2: 2.5 W

US-4x4: 5 W

External dimensions (width × height × depth)

US-2x2: 186 × 65 × 160 mm

US-4x4: 296 × 65 × 160 mm

Weight

US-2x2: 1.1 kg

US-4x4: 1.6 kg

Operating temperature range

5–35 °C

Included DAW software

SONAR LE (for Windows)

Ableton Live Lite

Dimensional drawings

US-4x4







US-2x2







• Illustrations in this manual might differ in part

from the actual product.

• Specifications and external appearance might

be changed without notification to improve the

product.

< In the United States >

This warranty gives you specific legal rights and you

may also have other rights which vary from state to

state. This warranty is only valid within the country

the unit was originally purchased.

WHAT IS AND IS NOT COVERED

Except as specified below, this warranty covers

all defects in materials and workmanship in this

product. The following are not covered by the

warranty:

1. Damage to or deterioration of the external cabinet.

2. Damages resulting from accident, misuse, abuse

or neglect.

3. Damage resulting from failure to perform

basic daily maintenance and/or calibration

or otherwise resulting from failure to follow

instructions contained in your owner’s manual.

4. Damage occurring during shipment of the

product. (Claims must be presented to the

carrier)

5. Damage resulting from repair or attempted

repair by anyone other than TEAC or an

authorized TASCAM service station.

6. Damage resulting from causes other than

product defects, including lack of technical skill,

competence, or experience of the user.

7. Damage to any unit which has been altered or

on which the serial number has been defaced,

modified or is missing.

WHO MAY ENFORCE THE WARRANTY

This warranty may be enforced only by the original

purchaser.

LENGTH OF WARRANTY

All parts except heads and disk drives are

warranted for one (1) year from the date

of original purchase. Heads and disk drives

are warranted to ninety (90) days from date

of original purchase. Labor is warranted

for ninety (90) days from date of original

purchase.

WHAT WE WILL PAY FOR

We will pay all labor and material expenses

for items covered by the warranty. Payment

of shipping charges is discussed in the next

section of this warranty.

HOW YOU CAN GET WARRANTY SERVICE

Your unit must be serviced by an authorized

TASCAM service station in the United States.

(This warranty is not enforceable outside the

U.S.) If you are unable to locate an authorized

TASCAM service station in your area, please

authorized service station or instruct you

to return the unit to the factory. Whenever

warranty service is required, you must

present a copy of the original dated sales

receipt from an Authorized TASCAM Dealer.

You must pay any shipping charges if it is

necessary to ship the product to service.

However, if the necessary repairs are covered by

the warranty, we will pay return surface shipping

charges to any destination within the United

States.

LIMITATION OF IMPLIED WARRANTIES

Any implied warranties, INCLUDING

WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, are

limited in duration to the length of this

warranty.

EXCLUSION OF DAMAGES

TEAC’s liability for any defective product

is limited to repair or replacement of the

product, at TEAC’s option. TEAC shall not be

liable for:

Damages based upon inconvenience, loss of use of

the product,

loss of time interrupted operation

or commercial loss; or

2. Any other damages, whether incidental,

consequential or otherwise.

Some states do not allow limitations on how

long an implied warranty lasts and/or do not

allow the exclusion or limitation of incidental

or consequential damages, so the above

limitations and exclusions may not apply to you.

To locate an Authorized Service Center in

Your Area

CALL 1-800-447-8322

< Europe >

This product is subject to the legal warranty

regulations of the country of purchase. In

case of a defect or a problem, please contact

the dealer where you bought the product.

Ce produit est sujet aux réglementations

concernant la garantie légale dans le pays

d’achat. En cas de défaut ou de problème,

veuillez contacter le revendeur chez qui vous

avez acheté le produit.

Dieses Gerät unterliegt den gesetzlichen

Gewährleistungsbestimmungen des Landes,

in dem es erworben wurde. Bitte wenden Sie

sich im Gewährleistungsfall an den Händler,

bei dem sie das Gerät erworben haben.

Questo apparecchio è conforme alle norme

sulla garanzia vigenti nel rispettivo Paese

in cui esso è stato acquistato. Si prega di

rivolgersi al proprio commerciante, presso

il quale è stato acquistato l’apparecchio,

nel caso in cui si voglia richiedere una

prestazione in garanzia.

Las condiciones de garantía de este aparato

están sujetas a las disposiciones legales

sobre garantía del país en el que ha sido

adquirido. En caso de garantía, debe dirigirse al

establecimiento donde adquirió el aparato.

<日本>

無料修理規定（持ち込み修理）

取扱説明書、本体貼付ラベルなどの注意

書きにしたがった正常な使用状態で保証

期間内に故障が発生した場合には、ティ

アック修理センターが無料修理いたしま

す。

保証期間内に故障して無料修理を受ける

場合は、本書をご提示の上、ティアック

修理センターまたはお買い上げの販売店

に修理をご依頼ください。商品を送付し

ていただく場合の送付方法については、

事前にティアック修理センターにお問い

合わせください。

ご転居、ご贈答品などでお買い上げの

販売店に修理をご依頼になれない場合

は、ティアック修理センターにご連絡

ください。

次の場合には、保証期間内でも有料修

理となります。

(1) ご使用上の誤りおよび不当な修理や

改造による故障および損傷

(2) お買い上げ後の輸送・移動・落下な

どによる故障および損傷

(3) 火災、地震、水害、落雷、その他

の天災地変、公害や異常電圧による

故障および損傷

(4) 接続している他の機器に起因する故

障および損傷

(5) 業務上の長時間使用など、特に苛酷

な条件下において使用された場合の

故障および損傷

(6)メンテナンス

(7)本書の提示がない場合

(8) 本書にお買い上げ年月日、お客様名、

販売店名(印)の記入のない場合、ある

いは字句を書き換えられた場合

本書（日本語記載部）は日本国内にお

いてのみ有効です。

These warranty provisions in Japanese are

valid only in Japan.

本書は再発行いたしませんので、紛失

しないよう大切に保管してください。

※

この保証書は、本書に明示した期間・

条件のもとにおいて無料修理をお約束

するものです。この保証書によって保

証書を発行しているもの（保証責任

者）、およびそれ以外の事業者に対す

るお客様の法律上の権利を制限するも

のではありません。保証期間経過後

の修理などについてご不明の場合は、

ティアック修理センターにお問い合わ

せください。

※

保証期間経過後の修理、補修用性能部

品の保有期間についての詳細は、取扱

説明書をご覧ください。

< In other countries/areas >

This warranty gives you specific legal rights,

and you may also have other rights that vary

by country, state or province.

If you have a warranty claim or request,

please contact the dealer where you bought

the product.

该保证书赋予了顾客特定的合法权利，并且

因国家，州或省等地域的不同，顾客可能拥

有其他权利。如需申请或要求保修，请与购

买本产品的销售店进行联系。

If you require repair services for your

TASCAM

equipment, please contact the dealer where

the product was purchased from or the

TASCAM

Distributor in your country. A list of

TASCAM

Distributors can be found on our

website at:

http://teac-global.com/

✂

WARRANTY

／保証書

Model / 型名

Serial No. / 機番

Date of purchase / お買い上げ日

http://teac-global.com/

Owner’s name / お名前

Address / ご住所

Dealer’s name / 販売店

Dealer’s address /

住所

✂

Memo / 修理メモ

WARRANTY /

保証書

Printed in China

D01236020C

US-2x2

US-4x4

USB Audio/MIDI Interface

REFERENCE MANUAL

Before connecting this unit to a computer, you must download and install dedicated software on the computer.

TASCAM US-2x2/US-4x4

Contents

1 – Introduction ..............................................3

Features ..........................................................................................3

Conventions used in this manual .......................................... 3

Using the TEAC Global Site ...................................................... 3

2 – Names and functions of parts ..................4

Front panel .................................................................................... 4

Rear panel ...................................................................................... 5

3 – Installation ................................................6

System requirements .................................................................6

Windows ............................................................................6

Mac OS X ............................................................................ 6

Apple iOS devices ........................................................... 6

Supported audio drivers .............................................. 6

Installing the dedicated software ......................................... 6

Installing the dedicated driver for Windows ........ 6

Installing the Mac OS X Settings Panel ................... 7

Working with Gatekeeper............................................8

Uninstalling the dedicated software....................................9

Uninstalling the dedicated driver for Windows .. 9

Installing the Mac OS X Settings Panel ................... 9

4 – Preparation ..............................................10

Connecting the power ............................................................10

Changing the outlet plug (US-4x4 only) ..............10

5 – Connections .............................................11

Connecting other equipment .............................................. 11

Computer connections ........................................................... 11

Audio connections....................................................................11

Microphones ..................................................................11

Guitar .................................................................................11

Electronic instruments and other audio

equipment .......................................................................11

Analog record players ................................................. 11

Monitor speakers ..........................................................12

Headphones ...................................................................12

MIDI connections ......................................................................12

Connecting with iOS devices ................................................ 12

6 – Using the Settings Panel ........................13

Opening the Settings Panel ..................................................13

Settings Panel screen ...............................................................13

7 – Standalone Mode .................................... 15

Overview ......................................................................................15

Settings in standalone mode ................................................15

Settings Panel settings ...............................................15

8 – Application Guide ...................................16

DAW software .............................................................................16

SONAR LE and Ableton Live Lite .............................16

Other DAW software ....................................................16

Windows Media Player ............................................................16

Mac OS X and iTunes ................................................................17

9 – MIDI Implementation Chart ...................18

10 – Troubleshooting ...................................19

11 – Specifications ........................................21

Audio resolution ........................................................................ 21

Analog inputs ................................................................. 21

Analog outputs ..............................................................21

Control input/output ratings ....................................21

Audio performance ......................................................21

Computer system requirements ..........................................22

Windows ..........................................................................22

Mac OS X ..........................................................................22

iOS devices ......................................................................22

Supported audio drivers ............................................22

General .......................................................................................... 22

Dimensional drawings .............................................................22

La pagina sta caricando ...

Tascam US-2x2 Manuale del proprietario

Marca: Tascam

Modello: US-2x2

Categoria: Apparecchiature musicali supplementari

Tipo: Manuale del proprietario

Questo manuale è adatto anche per

us-4x4

Scarica il pdf

rapporto

in altre lingue

English: Tascam US-2x2 Owner's manual

Tascam US-2x2 Manuale del proprietario

Questo manuale è adatto anche per

Tascam US-2x2 Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti