ProLights 91x3 W RGB lime high power full colour LED ellipsoidal Manuale utente

Categoria
Stroboscopi
Tipo
Manuale utente
ECLFC
ECLLB05
ECLLB10
ECLLB14
ECLLB19
ECLLB26
ECLLB36
ECLLB50
USER MANUAL
MANUALE UTENTE
ECLFC
EN - IT
LED PROFILER
All rights reserved by Music & Lights S.r.l. No part of this instruction manual may be
reproduced in any form or by any means for any commercial use.
In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the
characteristics stated in this instruction manual at any time and without prior notice.
All revisions and updates are available in the ‘manuals section on site www.musiclights.it
REV. 05-11/19
1
ECLFC
Packing content
ECLIPSEFC
Mount bracket
Power cable
User manual
TABLE OF CONTENTS
Safety
General instructionsGeneral instructions
Warnings and installation precautionsWarnings and installation precautions
1 Introduction
1. 1 Description1. 1 Description
1. 2 Technical specications1. 2 Technical specications
1. 3 The congurations1. 3 The congurations
1. 4 Operating elements and connections1. 4 Operating elements and connections
2 Installation
2. 1 Mounting2. 1 Mounting
3 Functions and settings
3. 1 Operation3. 1 Operation
3. 2 Basic3. 2 Basic
3. 3 Menu structure3. 3 Menu structure
3. 4 Static mode3. 4 Static mode
3. 5 Manual mode3. 5 Manual mode
3. 6 Master/Slave mode3. 6 Master/Slave mode
3. 7 Full on mode3. 7 Full on mode
3. 8 White Balance mode3. 8 White Balance mode
3. 9 Linking3. 9 Linking
3. 10 DMX conguration3. 10 DMX conguration
3. 11 DMX mode3. 11 DMX mode
3. 12 Connection of the DMX line3. 12 Connection of the DMX line
3. 13 Construction of the DMX termination3. 13 Construction of the DMX termination
3. 14 DMX control3. 14 DMX control
3. 15 Fixture settings3. 15 Fixture settings
3. 16 Fixure information3. 16 Fixure information
4 Maintenance
4. 1 Maintenance and cleaning the unit4. 1 Maintenance and cleaning the unit
4. 2 Fuse replacement4. 2 Fuse replacement
4. 3 Trouble shooting4. 3 Trouble shooting
2
2
3
3
5
6
7
8
8
9
12
12
12
12
12
13
13
13
15
15
16
19
19
21
21
21
ECLFC
2
SAFETY
General instruction
The products referred to in this manual conform to the European Community Directives and are there-
fore marked with .
The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.
Never make any modications on the unit not described in this instruction manual, otherwise you will
risk an electric shock.
Connection must be made to a power supply system tted with ecient earthing (Class I appliance ac-
cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units
from indirect contact and/or shorting to earth by using appropriately sized residual current devices.
The connection to the main network of electric distribution must be carried out by a qualied electrical
installer. Check that the main frequency and voltage correspond to those for which the unit is designed
as given on the electrical data label.
This unit is not for home use, only professional applications.
Never use the xture under the following conditions:
- in places wet;
- in places subject to vibrations or bumps;
- in places with a temperature of over 45 °C.
Make certain that no inammable liquids, water or metal objects enter the xture.
Do not dismantle or modify the xture.
All work must always be carried out by qualied technical personnel. Contact the nearest sales point for
an inspection or contact the manufacturer directly.
If the unit is to be put out of operation denitively, take it to a local recycling
plant for a disposal which is not harmful to the environment.
Warnings and installation precautions
If this device will be operated in any way dierent to the one described in this manual, it may suer
damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like
short circuit, burns, electric shock, etc.
Before starting any maintenance work or cleaning the projector, cut o power from the main supply.
Always additionally secure the projector with the safety rope. When carrying out any work, always com-
ply scrupulously with all the regulations (particularly regarding safety) currently in force in the country
in which the xture’s being used.
Install the xture in a well ventilated place.
Keep any inammable material at a safe distance from the xture.
Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent
that their eectiveness is impaired.
The lamp (LED) shall be changed if it has become damaged or thermally deformed.
Never look directly at the light beam. Please note that fast changes in lighting, e. g. ashing light, may
trigger epileptic seizures in photosensitive persons or persons with epilepsy.
Do not touch the product’s housing when operating because it may be very hot.
This product was designed and built strictly for the use indicated in this documentation. Any other use,
not expressly indicated here, could compromise the good condition/operation of the product and/or
be a source of danger.
We decline any liability deriving from improper use of the product.
WARNING! Before carrying out any operations with the unit, carefully read this instruction
manual and keep it with cure for future reference. It contains important information about
the installation, usage and maintenance of the unit.
3
ECLFC
- 1 - INTRODUCTION
1.1 DESCRIPTION
ECLIPSEFC is a full colour LED Ellipsoidal designed to deliver a full range of pastels, whites or saturates
smoothly, consistently and both with or without gobos.
The ECLIPSEFC’s RGB + Lime LED engine has been specially engineered to provide a full spectrum and full
output in the most discerning environments, regardless of which role the ECLIPSEFC is playing.
1.2 TECHNICAL SPECIFICATIONS
LIGHT SOURCE
Source: 91x3W RGB + lime LEDs
Luminous ux: (5°) 3’538 lm - (10°) 4’088 lm - (14°) 4’618 lm - (19°) 3’921 lm - (26°) 4’918 lm - (36°) 4’918
lm - (50°) 4’557lm
Lux: (5°) 36’042 lx - (10°) 17’857 lx - (14°) 9’201 lx - (19°) 5’850 lx - (26°) 3’769 lx - (36°) 2’280 lx, (50°)
1’050lx @3 m full
Source life expectancy: > 50.000 h
OPTICS
Beam angle: optional 5° / 10° / 14° / 19° / 26° / 36° / 50° / Z15 - 30° / Z25 - 50°
Lens type: high-quality glass lens optics
COLOUR SYSTEM
Colour mixing: RGB + lime / full colour
CTC: CTC control through independent DMX channel, + / - green and magenta correction and amber
shift activation by DMX
White presets: 2.700 K ~10.000K
Macros: built-in white presets
DYNAMIC EFFECTS
Gobo size: B, outer: 86 mm - image: 64,5 mm - thickness: 1,1 mm
Static colour mode: selection of static colour
Manual colour mode: manual adjustment of colour
Special features: automatic software colour balance when xture warms up - linear crossfade from a
white to any color and CTO applied on colours
BODY
Body: sturdy die-cast aluminium body conceived for long-time durability
Body colour: black, white nishing available
CONTROL
Protocols: DMX512, RDM
DMX channels: Theater 1 / 3 / 5 / 17 channel - Tour 4 / 8 / 11channel
RDM: RDM ready for xture remote monitor and settings
Display: black OLED high resolution display
Firmware upgrade: yes, via USB - DMX interface (UPBOX1) not included
Master/Slave: for synchronized operation of more units linked in a chain
ECLFC
4
ELECTRONICS
Dimmer: linear 0 ~ 100% electronic dimmer
Dimmer curves: 4 dierent dimming curves available
Strobe / shutter: 1 - 30 Hz, electronic
Battery backup: battery backup for user operation without connecting to the main power
Operating temperature: -10° ~ +45°
Flicker: icker free operation
Selectable PWM: 600 ~ 25.000 Hz
ELECTRICAL
Power supply: 100-240 V – 50/60 Hz
Power consumption (at 230 V): 216W
Output (at 230 V): 6 units on a single power line
PHYSICAL
Cooling: combination of heat pipe cooling system and low noise fan
Sospension and xing: hanging bracket suitable for safe hanging and positioning
Signal connection: Amphenol XLR 5p IN/OUT connectors
Power connection: Neutrik powerCON IN/OUT connectors
IP rating: 20
Dimensions (WxHxD): 342x506x530 mm
Weight: 9 kg
Technical drawing Fig.1
342 528
526
5
ECLFC
1.3 THE CONFIGURATIONS
Configuration
1 Reector Housing
Middle part, compatible with
5 °, 10 °, 14 °, 19°, 26°, 36°,
50° optics
2
ECLIPSELB05
Optics for ECLIPSE proler,
5° beam
ECLIPSELB10
Optics for ECLIPSE proler,
10° beam
ECLIPSELB14
Optics for ECLIPSE proler,
14° beam
ECLIPSELB19
Optics for ECLIPSE proler,
19° beam
ECLIPSELB26
Optics for ECLIPSE proler,
26° beam
ECLIPSELB36
Optics for ECLIPSE proler,
36° beam
ECLIPSELB50
Optics for ECLIPSE proler,
50° beam
ECLIPSEFC
OR
ECLFC
6
Fig.2
Rear panel
1.4 OPERATING ELEMENTS AND CONNECTIONS
1. MOUNTING BRACKET
2. LOCKING KNOB for the mounting bracket
3. HANDLE
4. ECLIPSEFC
5. SAFETY EYE to attach safety cable.
6. SHUTTER
7. ECLIPSEMP - Aluminium middle part
8. OPTIC
9. FILTER FRAME
10. FUSE OLDER in the event of breakage, always
replace the fuse with the same type and
rating (T3.15A).
11. CONTROL PANEL with display and 4 button
used to access the control panel functions
and manage them.
12. POWER IN (PowerCON IN): for connection to a
socket (100-240V~/50-60Hz) via the supplied
mains cable.
13. POWER OUT (PowerCON OUT): connect to
supply power to the next unit.
14. DMX OUT (5-pole XLR):
1 = ground, 2 = DMX-, 3 = DMX+, 4 N/C, 5 N/C
15. DMX IN (5-pole XLR):
1 = ground, 2 = DMX-, 3 = DMX+, 4 N/C, 5 N/C
1
2
4
5
3
7
6
12
11
13
15
10
14
8
9
Fig.3
CLAMP
SAFETY
CABLE
2
1
7
ECLFC
- 2 - INSTALLATION
2.1 MOUNTING
ECLIPSEFC may be set up on a solid and even surface. The unit can also be mounted upside down to a
cross arm. For xing, stable mounting clips are required. The mounting place must be of sucient stability
and be able to support a weight of 10 times of the unit’s weight.
When carrying out any installation, always comply scrupulously with all the regulations (particularly re-
garding safety) currently in force in the country in which the xture’s being used.
Install the projector at a suitable location by means of the mounting bracket (1).
Always additionally secure the projector with the safety rope from falling down. For this purpose, fas-
ten the safety rope at a suitable position so that the maximum fall of the projector will be 20 cm.
Adjust the projector and use the knob (2) to slightly release or tighten the locking mechanism of the
bracket if is necessary.
ECLFC
8
- 3 - FUNCTIONS AND SETTINGS
3.1 OPERATION
Connect the supplied main cable to a socket (100-240 VAC-50/60 Hz). Then the unit is ready for operation
and can be operated via a DMX controller or it independently performs its show program in succession.
To switch o, disconnect the mains plug from the socket. For a more convenient operation it is recom-
mended to connect the unit to a socket which can be switched on and o via a light switch.
3.2 BASIC
Access control panel functions using the four panel buttons located directly underneath the OLED Display
(g.4).
MENU UP DOWN ENTER
Used to access the menu or
to return a previous menu
option
Navigates downwards through
the menu list and increases
the numeric value when in a
function
Navigates upwards through
the menu list and decreases
the numeric value when in
a function
Used to select and store the
current menu or conrm the
current function value or
option within a menu
Fig.4 - Functions of the buttons
MENU UP
DOWNENTER
9
ECLFC
3.3 MENU STRUCTURE
MENU Remark
1 DMX Address
ð
Value (001-512) Default: 001
2 DMX Channel
ð
Theater
ð
1 Ch Default: 8 CH
3 Ch
5 Ch
17 Ch
Tour
ð
4 Ch
8 Ch
11 Ch
3 Full on Mode
ð
HB Mode
Studio Mode
Default: Studio
4 Dimmer Mode
ð
O Default: O
Dimmer 1
Works only in DMX Channels
without DIMMER FADE
channel (1, 5, 4, 11)
Dimmer 2
Dimmer 3
5 White Calibrat.
ð
2700K Default: 3200 K
3200K
Not customizable
4200K
5500K
6000K
8000K
Full RGBL RGBL (all 255)
Custom
ð
Red
ð
Value (000-255)
User can see and edit every
single RGBL parameter
Green
ð
Value (000-255)
Blue
ð
Value (000-255)
Lime
ð
Value (000-255)
ECLFC
10
6 Stand Alone
ð
Master/Slave
ð
Master
Slave
Eects
ð
Eect 1
Eect 2
Eect 3
Eect 4
Eect 5
Statics
ð
Fixed Color
ð
R
G
B
L
RG
RB
RL
GB
GL
BL
RGB
RGL
RBL
GBL
RGBL
Default:
RGBL
ð
Color Temperature
ð
White 2700K
Default:
3200 K
White 3200K
White 4200K
White 5000K
White 5500K
White 6000K
White 7000K
White 8000K
White 9000K
White 10000K
ð
Manual color Mix
ð
Red
ð
Value (000-255)
Green
ð
Value (000-255)
Blue
ð
Value (000-255)
Lime
ð
Value (000-255)
11
ECLFC
7 White Balance
ð
O
Manual
ð
Red
Green
Blue
Lime
ð
Value (125-255Value)
8 LED Frequency
ð
600 Hz
1200 Hz
2000 Hz
4000 Hz
25 kHz
Default: 1200 kHz
9 Fan Mode
ð
Auto Speed Default: Auto speed
High Speed
10 Back Light
ð
On Default: 10 s
10 s
20s
30 s
11 Information
ð
Fixture Hours < 9999 H >
Fixture running time
0-9999H
Version < V1.0 > Version number
UID
Settings Reset factory
ECLFC
12
3.4 STATIC MODE
This xture has the ability to accept custom static color settings. Access these chases via the control panel
on the back of the xture.
Press the button MENU so many times until the display shows STATIC, then press the button ENTER.
Select Fixed Color through the buttons UP/DOWN, then press the button ENTER.
Set the colors Red, Green, Blue, Lime, Red Green, Red Blue, Red Lime, Green Blue, Green Lime, Red Green Blue, Red
Green Lime, Red Blue Lime, Green Blue Lime, Red Green Blue Lime, through the buttons UP/DOWN, then press
the button ENTER.
Select Color Temperature through the buttons UP/DOWN, then press the button ENTER.
Set the color temperature White 2700K, White 3200K, White 4200K, White 5000K, White 5500K, White 6000K, White
7000K, White 8000K, White 9000K, White 10000K, through the buttons UP/DOWN, then press the button EN-
TER.
Press the MENU button to go back or to meet the waiting time to exit the setup menu.
3.5 MANUAL MODE
This mode allows to combine the colors red, green, blue and lime.
Press the button MENU so many times until the display shows STATIC, then press the ENTER button.
Select STATIC, and next select Manual Color Mixer through the buttons UP/DOWN, then press the ENTER
button.
Select the color Red, Green, Blue, Lime through the buttons UP/DOWN, then press the ENTER button.
Using UP/DOWN button, select the desired color value 000 - 255.
Press ENTER button to continue to the next color Red, Green, Blue, Lime.
Continue until the desired mix is obtained.
Press the MENU button to go back or to meet the waiting time to exit the setup menu.
3.6 MASTER/SLAVE MODE
This mode will allow you to link up the units together without a controller. Choose a unit to function as the
Master. The unit must be the rst unit in line; other units will work as slave with the same eect.
Press the button MENU so many times until the display shows STAND ALONE and press the ENTER button.
Press UP/DOWN to set the unit as master or slave (MASTER, SLAVE).
Use standard DMX cables to daisy chain your units together via the DMX connector on the rear of the
units. For longer cable runs we suggest a terminator at the last xture (see page 15).
3.7 FULL ON MODE
Press the MENU button until FULL ON MODE appears on the display, then press the ENTER button.
Select the desired mode: HB (High Brightness mode, with maximum color value) or Studio, with an au-
tomatic white balance.
Press the ENTER key to conrm.
Press the MENU button to go back or wait a few seconds to exit the setup menu.
3.8 WHITE BALANCE MODE
To set the white balance, press the MENU button until WHITE BALANCE appears on the display, then press
the ENTER button.
Use the UP / DOWN keys to select the color: Red, Gree, Blue, Lime. Press ENTER to conrm.
Use the UP / DOWN keys to set the desired value 125-255.
Press the ENTER key to continue and go to the next color Red, Gree, Blue or Lime.
13
ECLFC
Continue until the desired values are set.
Press the MENU button to go back or wait a few seconds to exit the setup menu.
3.9 LINKING
1. Connect the DMX OUT of the master unit via 5-pole XLR cable to the DMX IN of the rst slave unit.
2. Connect the DMX OUT of the rst slave unit to the DMX IN of the second slave unit, etc. until all units
are connected in a chain.
3.10 DMX CONFIGURATION
ECLIPSEFC is equipped with dierent DMX conguration.
Press the button MENU so many times until shows DMX CHANNEL, and press the button ENTER to conrm.
Select THEATER or TOUR through the buttons UP/DOWN, then press the button ENTER.
Select the desired DMX conguration (1CH - 3CH - 5CH - 17CH or 4CH - 8CH - 11CH) through the buttons UP/
DOWN.
The tables on page 16, 17 e 18 indicate the operating mode and DMX value. The ECLIPSEFC is equipped
with 5-pole XLR connections.
3.11 DMX MODE
Press the button MENU so many times until the display shows DMX ADDRESS, and press the button ENTER
to conrm.
Press UP/DOWN button to select the desired value (001-512). Press and hold to scroll quickly.
Press ENTER button to store.
Press the MENU button to go back or to meet the waiting time to exit the setup menu.
To able to operate the ECLIPSE with a light controller, adjust the DMX start address for the rst a DMX
channel. If e. g. address 33 on the controller is provided for controlling the function of the rst DMX
channel, adjust the start address 33 on the ECLIPSE. The other functions of the light eect panel are then
automatically assigned to the following addresses.
An example with the start address 33 is shown below:
Number of
DMX channels
Start address
(example)
DMX Address
occupied
Next possible start
address for unit No. 1
Next possible start
address for unit No. 2
Next possible start
address for unit No. 3
1 33 33 34 35 36
3 33 33-34 35 37 39
4 33 33-36 37 41 45
5 33 33-37 38 43 48
8 33 33-40 41 49 57
11 33 33-43 44 55 66
17 33 33-49 50 67 84
ECLFC
14
DMX Address: 48DMX Address: 38DMX Address: 33 DMX Address: 43
Fig.5 - Example 5 DMX channels conguration
DMX512 Controller
. . . . . . . . . . . .
15
ECLFC
Fig.6
Fig.7
3.12 CONNECTION OF THE DMX LINE
DMX connection employs standard XLR connectors. Use shielded pair-twisted cables with 120Ω imped-
ance and low capacity.
The following diagram shows the connection mode:
ATTENTION
The screened parts of the cable (sleeve) must never be connected to the system’s earth, as this would
cause faulty xture and controller operation.
Over long runs can be necessary to insert a DMX level matching amplier.
For those connections the use of balanced microphone cable is not recommended because it cannot
transmit control DMX data reliably.
Connect the controller DMX input to the DMX output of the rst unit.
Connect the DMX output to the DMX input of the following unit. Connect again the output to the input
of the following unit until all the units are connected in chain.
When the signal cable has to run longer distance is recommended to insert a DMX termination on the
last unit.
3.13 CONSTRUCTION OF THE DMX TERMINATION
The termination avoids the risk of DMX 512 signals being reected back along the cable when they reach-
es the end of the line: under certain conditions and with certain cable lengths, this could cause them to
cancel the original signals.
The termination is prepared by soldering a 120Ω 1/4 W resistor between pins 2 and 3 of the 5-pin male XLR
connector, as shown in gure.
DMX - OUTPUT
XLR socket
DMX - INPUT
XLR plug
Pin1 : GND - Shield
Pin2 : - Negative
Pin3 : + Positive
Pin4 : N/C
Pin5 : N/C
Example:
5 pin XLR connector
4
ECLFC
16
3.14 DMX CONTROL
THEATER - 1 CHANNEL
MODE
FUNCTION DMX
Value
1 Ch
1
DIMMER
0~100% 000 - 255
NOTE - CHOOSE THE COLOR PRESET IN WHITE CALIBRATION
THEATER - 3 CHANNELS
MODE
FUNCTION DMX
Value
3 Ch
1
DIMMER
0~100% 000 - 255
2
WHITE PRESET
White 2700K
White 3200K
White 4200K
White 5000K
White 5500K
White 6000K
White 7000K
White 8000K
White 9000K
White 10000K
000 - 026
027 - 051
052 - 076
077 - 101
102 - 126
127 - 151
152 - 176
177 - 201
202 - 226
227 - 255
3
DIMMER FADE
0~100% (0-1,5 s) 000 - 255
TOUR - 4 CHANNELS
MODE
FUNCTION DMX
Value
4 Ch
1
RED
0~100% 000 - 255
2
GREEN
0~100% 000 - 255
3
BLUE
0~100% 000 - 255
4
LIME
0~100% 000 - 255
THEATER - 5 CHANNELS
MODE
FUNCTION DMX
Value
5 Ch
1
DIMMER
0~100% 000 - 255
2
RED
0~100% 000 - 255
3
GREEN
0~100% 000 - 255
4
BLUE
0~100% 000 - 255
5
LIME
0~100% 000 - 255
17
ECLFC
TOUR - 11 CHANNELS
MODE
FUNCTION DMX
Value
11 Ch
1
DIMMER
0~100% 000 - 255
2
DIMMER FINE
0~100% 000 - 255
3
RED
0~100% 000 - 255
4
RED FINE
0~100% 000 - 255
5
GREEN
0~100% 000 - 255
6
GREEN FINE
0~100% 000 - 255
7
BLUE
0~100% 000 - 255
8
BLUE FINE
0~100% 000 - 255
9
LIME
0~100% 000 - 255
10
LIME FINE
0~100% 000 - 255
11
STROBE
No Function
Strobe slow to fast
000 - 010
011 - 255
TOUR - 8 CHANNELS
MODE
FUNCTION DMX
Value
8 Ch
1
DIMMER
0~100% 000 - 255
2
RED
0~100% 000 - 255
3
GREEN
0~100% 000 - 255
4
BLUE
0~100% 000 - 255
5
LIME
0~100% 000 - 255
6
COLOR PRESET
No Function
Red
Green
Blue
Lime
Cyan
Magenta
Yellow
Orange
Light Yellow
Light Blue
Light Pink
White 2700K
White 3200K
White 4200K
White 5000K
White 5500K
White 6000K
White 7000K
White 8000K
White 9000K
White 10000K
000 - 003
004 - 015
016 - 027
028 - 039
040 - 051
052 - 063
064 - 075
076 - 087
088 - 099
100 - 111
112 - 123
124 - 135
136 - 147
148 - 159
160 - 171
172 - 183
184 - 195
196 - 207
208 - 219
220 - 231
232 - 243
244 - 255
7
STROBE
No Function
Strobe slow to fast
000 - 010
011 - 255
8
DIMMER FADE
0~100% (0-1,5 s) 000 - 255
ECLFC
18
THEATER - 17 CHANNELS
MODE
FUNCTION DMX
Value
17 Ch
1
DIMMER
0~100% 000 - 255
2
DIMMER FINE
0~100% 000 - 255
3
STROBE
No Function shutter open
Strobe eect slow to fast
No Function shutter open
Random strobe eect slow to fast
No Function shutter open
000 - 030
031 - 100
101 - 130
131 - 200
201 - 255
4
CTO
2700K -3200K
3200K - 4200K
4200K - 5000K
5000K - 5500K
5500K - 6000K
6000K - 7000K
7000K - 8000K
8000K - 9000K
9000K - 10000K
000 - 027
028 - 055
056 - 083
084 - 111
112 - 139
140 - 167
168 - 195
196 - 223
224 - 255
5
HUE
-25 to 0
No Function
0 to +25
000 - 126
127 - 127
128 - 255
6
CROSSFADE
0~100% 000 - 255
THEATER - 17 CHANNELS
MODE
FUNCTION DMX
Value
17 Ch
7
RED
0~100% 000 - 255
8
RED FINE
0~100% 000 - 255
9
GREEN
0~100% 000 - 255
10
GREEN FINE
0~100% 000 - 255
11
BLUE
0~100% 000 - 255
12
BLUE FINE
0~100% 000 - 255
13
LIME
0~100% 000 - 255
14
LIME FINE
0~100% 000 - 255
15
COLOR MACRO
No Function
Amber Shift on
Color Macro
000 - 002
003 - 005
006 - 255
16
CTO
0~100% 000 - 255
17
DIMMER FADE
Preset dimmer speed from display menu
Dimmer speed mode o
Dimmer speed mode1 (fast speed)
Dimmer speed mode2 (middle speed)
Dimmer speed mode3 (slow speed)
000 - 051
052 - 101
102 - 152
153 - 203
204 - 255
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50

ProLights 91x3 W RGB lime high power full colour LED ellipsoidal Manuale utente

Categoria
Stroboscopi
Tipo
Manuale utente