SMC Networks EZ-Stream SMC2304WBR-AG Manuale utente

38 Tesla

Irvine, CA 92618

Phone: (949) 679-8000

EZ-Stream Universal 2.4GHz/5GHz

Wireless Cable/DSL Broadband Router

User Guide

From SMC’s EZ-Stream line of Broadband Routers

December 2003

Revision No: R01 F1.0

COPYRIGHT

Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable.

However, no responsibility is assumed by SMC for its use, nor for any infringements of patents

or other rights of third parties which may result from its use. No license is granted by

implication or otherwise under any patent or patent rights of SMC. SMC reserves the right to

change specifications at any time without notice.

SMC Networks, Inc.

38 Tesla

Irvine, CA 92618

Trademarks:

SMC is a registered trademark; EZ-Stream and Barricade is a trademark of SMC Networks,

Inc. Other product and company names are trademarks or registered trademarks of their

respective holders.

i

TABLE OF CONTENTS

CHAPTER 1 | Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Minimum Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . 2

CHAPTER 2 | Getting to Know the EZ-Stream Wireless Router . . . 3

Hardware Description . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

CHAPTER 3 | Installing the EZ-Stream Wireless Router . . . . . . . . 6

Basic Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . 6

Attach to Your Network Using Ethernet Cabling . . . . . . . . . . 7

Attach to Your Network Using Radio Signals . . . . . . . . . . . . 8

Attach the EZ-Stream Wireless Router to the Internet . . . . 10

Connecting the Power Adapter . . . . . . . . . . . . . . . . . . . . 10

CHAPTER 4 | Configuring Client TCP/IP . . . . . . . . . . . . . . . . . 11

Installing TCP/IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Windows 95/98/Me . . . . . . . . . . . . . . . . . . . . . . . 11

Windows 2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Setting Up TCP/IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Configuring Your Computer in Windows 95/98/Me . . . 14

Configuring Your Computer in Windows NT 4.0 . . . . . 17

Configuring Your Computer in Windows 2000 . . . . . . 19

Configuring Your Computer in Windows XP . . . . . . . . 20

Configuring a Macintosh Computer . . . . . . . . . . . . . 21

Manual IP Configuration (for all Windows OS) . . . . . . . . . . 22

Verifying Your TCP/IP Connection . . . . . . . . . . . . . . . . . . 24

CHAPTER 5 | Configuring the EZ-Stream Wireless Router . . . . . 25

Browser Configuration . . . . . . . . . . . . . . . . . . . . . . . . . 25

Disable Proxy Connection . . . . . . . . . . . . . . . . . . . 25

Internet Explorer 5 or above (For Windows) . . . . . . . 25

Internet Explorer (For Macintosh) . . . . . . . . . . . . . . 26

Navigating the Web Browser Interface . . . . . . . . . . . . . . . 26

Making Configuration Changes . . . . . . . . . . . . . . . . 26

SETUP WIZARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Time Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Broadband Type . . . . . . . . . . . . . . . . . . . . . . . . . 28

Cable Modem . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

T

ABLE

OF

C

ONTENTS

ii

Fixed-IP xDSL . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

PPPoE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Point-to-Point Tunneling Protocol (PPTP) . . . . . . . . . 30

BigPond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

ADVANCED SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

STATUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

WAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

WIRELESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

NAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

FIREWALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

DDNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

UPnP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

TOOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

CHAPTER 6 | Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . 76

CHAPTER 7 | Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 79

CHAPTER 8 | Compliances . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Federal Communication Commission Interference Statement 81

Industry Canada - Class B . . . . . . . . . . . . . . . . . . . . . . . . 82

EC Conformance Declaration . . . . . . . . . . . . . . . . . . . . . 82

Safety Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

1

CHAPTER 1 | INTRODUCTION

Congratulations on your purchase of the EZ-Stream Universal 2.4GHz/

5GHz Wireless Cable/DSL Broadband Router. SMC is proud to provide

you with a powerful yet simple communication device for connecting

your local area network (LAN) to the Internet.

1.0 | Features and Benefits

• Internet connection to DSL or cable modem via

a 10/100 Mbps WAN port

• Local network connection via 10/100 Mbps Ethernet ports or

108 Mbps wireless interface (supporting up to 253 mobile

users)

• 802.11a/b/g compliant – interoperable with multiple vendors

• Advanced security through 64/128-bit WEP encryption, 802.1x,

SSID broadcast disabled, and MAC address filtering features to

protect your sensitive data and authenticate only authorized

users to your network

• Provides seamless roaming within 802.11a/b/g WLAN

environment

• DHCP for dynamic IP configuration, and DNS for domain name

mapping

• Firewall with Stateful Packet Inspection, client privileges,

hacker prevention, DoS, and NAT

• NAT also enables multi-user access with a single-user account,

and virtual server functionality (providing protected access to

Internet services such as web, mail, FTP, and Telnet)

• Virtual Private Network support using PPTP, L2TP, or IPSec

pass-through

• User-definable application sensing tunnel supports

applications requiring multiple connections

• Parental controls allow the user to restrict web browsing

• Automatic E-mail alerts when the network is being attacked

• Easy setup through a web browser on any operating system

that supports TCP/IP

• Compatible with all popular Internet applications

Introduction

2

1.1 | Package Contents

After unpacking the EZ-Stream Wireless Router, check the contents of

the box to be sure you have received the following components:

• EZ-Stream Universal 2.4GHz/5GHz Wireless Cable/DSL

Broadband Router

• Power adapter

• One CAT-5 Ethernet cable

• Installation CD containing this User Guide and EZ 3-Click

Installation Wizard

• Quick Installation Guide

Immediately inform your dealer in the event of any incorrect, missing

or damaged parts. If possible, please retain the carton and original

packing materials in case there is a need to return the product.

Please register on SMC’s web site at www.smc.com

The EZ-Stream

Wireless Router is covered by a limited lifetime warranty.

1.2 | Minimum Requirements

You must have an ISP that meets the following minimum

requirements:

• Internet access from your local telephone company or Internet

Service Provider (ISP) using a DSL modem or cable modem.

• A PC using a fixed IP address or dynamic IP address assigned via

DHCP, as well as a gateway server address and DNS server

address from your service provider.

• A computer equipped with a 10 Mbps, 100 Mbps, or

10/100 Mbps Fast Ethernet card, or a USB-to-Ethernet

converter.

• TCP/IP network protocol installed on each PC that needs to

access the Internet.

• A Java-enabled web browser, such as Microsoft Internet

Explorer 5.0 or above installed on one PC at your site for

configuring the Router.

3

CHAPTER 2 | GETTING TO KNOW THE EZ-STREAM WIRELESS

R

OUTER

2.0 | Hardware Description

The Router can be connected to the Internet or to a remote site using

its RJ-45 WAN port. It can be connected directly to your PC or to a

local area network using any of the Fast Ethernet LAN ports.

Access speed to the Internet depends on your service type. Full-rate

ADSL can provide up to 8 Mbps downstream and 640 Kbps upstream.

G.lite (or splitterless) ADSL provides up to 1.5 Mbps downstream and

512 Kbps upstream. Cable modems can provide up to 36 Mbps

downstream and 2 Mbps upstream. ISDN can provide up to 128 Kbps

when using two bearer channels. PSTN analog connections can now

run up to 56 Kbps. However, you should note that the actual rate

provided by specific service providers may vary dramatically from

these upper limits.

Although access speed to the Internet is determined by the modem

type connected to the Router, data passing between devices

connected to your local area network can run up to 100 Mbps over the

Fast Ethernet ports.

The Router includes an LED display on the front panel for system

power and port indications that simplifies installation and network

troubleshooting. It also provides four RJ-45 LAN ports and one RJ-45

WAN port on the rear panel.

• 4 RJ-45 ports for connection to a 10BASE-T/100BASE-TX

Ethernet Local Area Network (LAN). These ports can

auto-negotiate the operating speed to 10/100 Mbps, the mode

to half/full duplex, and the pin signals to MDI/MDI-X

(i.e., allowing these ports to be connected to any network

device with straight-through cable). These ports can be

connected directly to a PC or to a server equipped with an

Ethernet network interface card, or to a networking device

such as an Ethernet hub or switch.

• One RJ-45 port for connection to a DSL or cable modem (WAN).

This port also auto-negotiates operating speed to

10/100 Mbps, the mode to half/full duplex, and the pin signals

to MDI/MDI-X.

Getting to Know the EZ-Stream Wireless Router

4

The following figures show the components of the Router:

Figure 2-1. Front and Rear Panels

Item Description

LEDs Power, WLAN, WAN, and LAN ports status indicators.

(See “LED Indicators” on page 5.)

LAN

Ports

Use this port to connect to your PC.

Reset

Button

Use this button to reboot the router or restore the default factory

settings.

WAN

Port

Connect your ethernet cable, or xDSL modem to this port.

Power

Inlet

Connect the included power adapter to this inlet.

Warning: Using the wrong type of power adapter may damage

your router.

12

LED Indicators

5

2.1 | LED Indicators

The EZ-Stream Wireless Router includes status LED indicators, as

described in the following figure and table.

Figure 2-2. Status LED

LED Status Description

PWR (Green) On The EZ-Stream Wireless Router is receiving power.

WLAN - 11a

(Green)

On The EZ-Stream Wireless Router has established a

valid wireless connection.

WLAN - 11b/g

(Green)

On The EZ-Stream Wireless Router has established a

valid wireless connection.

WAN (Green) Flashing The EZ-Stream Wireless Router is transmitting or

receiving data on the WAN port. Flashing rate is

proportional to your network activity.

LAN - 1, 2, 3, 4

Link/ACT

(Green)

On The indicated LAN port has established a valid

network connection.

Flashing The indicated LAN port is transmitting or receiving

traffic.

Speed

(Orange)

Off The indicated LAN port has established a valid

10 Mbps network connection.

On The indicated LAN port has established a valid

100 Mbps network connection.

6

CHAPTER 3 | INSTALLING THE EZ-STREAM WIRELESS

R

OUTER

Before installing the EZ-Stream Universal 2.4GHz/5GHz Wireless

Cable/DSL Broadband Router, verify that you have all the items listed

under “Package Contents” on page 2. If any of the items are missing

or damaged, contact your local SMC distributor. Also be sure that you

have all the necessary cabling before installing the Router. After

installing the Router, refer to the web-based configuration program in

“Configuring the EZ-Stream Wireless Router” on page 25 for

information on configuring the Router.

The Router can be positioned at any convenient location in your

office or home. No special wiring or cooling requirements are needed.

You should, however comply with the following guidelines:

• Keep the Router away from any heating devices.

• Do not place the Router in a dusty or wet environment.

You should also remember to turn off the power, remove the power

cord from the outlet, and keep your hands dry when you install the

Router.

3.0 | Basic Installation Procedure

1. Connect the WAN: Connect an Ethernet cable from your cable

or DSL modem to the WAN port on the back on the Router.

2. Connect the LAN: Connect the Router to your PC, or to a hub or

switch. Run Ethernet cable from one of the LAN ports on the

rear of the Router to your computer’s network adapter or to

another network device.

You may also connect the Router to your PC (using a wireless

client adapter) via radio signals. Position both antennas on the

back of the Router into the desired positions. For more

effective coverage, position the antennas along different axes.

For example, try positioning the antennas around 45 to 90

degrees apart. (The antennas emit signals along the toroidal

plane – and thus provide more effective coverage when

positioned along different axes.)

Attach to Your Network Using Ethernet Cabling

7

3. Power on: Connect the power adapter to the Router.

Figure 3-1. Connecting the EZ-Stream Wireless Router

3.1 | Attach to Your Network Using Ethernet Cabling

The four LAN ports on the Router auto-negotiate the connection

speed to 10 Mbps Ethernet or 100 Mbps Fast Ethernet, and the

transmission mode to half duplex or full duplex.

Use twisted-pair cable to connect any of the four LAN ports on the

Router to an Ethernet adapter on your PC. Otherwise, you can

cascade any of the LAN ports on the Router to an Ethernet hub or

switch, and then connect your PC or other network equipment to the

hub or switch. When inserting an RJ-45 plug, be sure the tab on the

plug clicks into position to ensure that it is properly seated.

Warning: Do not plug a phone jack connector into any RJ-45

port. This may damage the Router. Instead, use only

twisted-pair cables with RJ-45 connectors that

conform with FCC standards.

Internet

Access

Device

SMC2304WBR-AG

Wireless Gateway

SOHO Office or Residence

Installing the EZ-Stream Wireless Router

8

Figure 3-2. Making the LAN Connections

3.2 | Attach to Your Network Using Radio Signals

Install a wireless network adapter in each computer that will be

connected to the Internet or your local network via radio signals. SMC

currently offers several wireless network cards, including the

SMC2802W wireless PCI and SMC2835W wireless PC cards.

Rotate both antennas on the back of the Router to the desired

position. For more effective coverage, position the antennas around

45 to 90 degrees apart. Try to place the Router in a position that is

located in the center of

your wireless network. Normally, the higher

you place the antenna,

the better the performance. Ensure that the

Router’s location provides optimal reception throughout your home or

office.

Computers equipped with a wireless adapter can communicate with

each other as an independent wireless LAN by configuring each

computer to the same radio channel. However, the Router can

provide access to your wired/wireless LAN or to the Internet for all

wireless workstations. Each wireless PC in this network infrastructure

can talk to any computer in the wireless group via a radio link, or

access other computers or network resources in the wired LAN

infrastructure or over the Internet via the Router.

12

Attach to Your Network Using Radio Signals

9

The wireless infrastructure configuration not only extends the

accessibility of wireless PCs to the wired LAN, but also increases the

effective wireless transmission range for wireless PCs by

retransmitting incoming radio signals through the Router.

A wireless infrastructure can be used for access to a central database,

or for connection between mobile workers, as shown in the following

figure:

Figure 3-3. Making the WLAN Connections

Internet

Access

Device

Notebook with Wireless

PC Card Adapter

PC with Wireless

PCI Adapter

Wired LAN

Wired to Wireless

Network Extension

Internet

Installing the EZ-Stream Wireless Router

10

3.3 | Attach the EZ-Stream Wireless Router to the Internet

If Internet services are provided through an xDSL or cable modem, use

unshielded or shielded twisted-pair Ethernet cable (Category 3 or

greater) with RJ-45 plugs to connect the broadband modem directly

to the WAN port on the Router.

Figure 3-4. Making the WAN Connection

Note: When connecting to the WAN port, use 100-ohm

Category 3, 4, or 5 shielded or unshielded twisted-pair

cable with RJ-45 connectors at both ends for all

connections.

3.4 | Connecting the Power Adapter

Plug the power adapter into the power socket on the Router, and the

other end into a power outlet. Check the indicator marked “PWR” on

the front panel to be sure it is on. If the power i

ndicator does not

light, refer to

“Troubleshooting” on page 76

.

12

ISP

(Primary)

DSL/Cable

Modem

11

CHAPTER 4 | CONFIGURING CLIENT TCP/IP

If you have not previously installed the TCP/IP protocols on your

client PCs, refer to the following section. If you need information on

how to configure a TCP/IP address on a PC, refer to “Setting Up TCP/

IP” on page 13.

4.0 | Installing TCP/IP

Windows 95/98/Me

1. Click Start/Settings/Control Panel.

2. Double-click the Network icon and select the Configuration tab

in the Network window.

3. Click the Add button.

4. Double-click Protocol.

Configuring Client TCP/IP

12

5. Select Microsoft in the manufacturers list. Select TCP/IP in the

Network Protocols list. Click the OK button to return to the

Network window.

6. The TCP/IP protocol will be listed in the Network window. Click

OK. The operating system may prompt you to restart your

system. Click Yes and the computer will shut down and restart.

Windows 2000

1. Click the Start button and choose Settings, then click the

Network and Dial-up Connections icon.

2. Double-click the Local Area Connection icon, and click the

Properties button on the General tab.

3. Click the install... button.

Setting Up TCP/IP

13

4. Double-click Protocol.

5. Choose Internet Protocol (TCP/IP). Click the OK button to return

to the Network window.

6. The TCP/IP protocol will be listed in the Network window. Click

OK to complete the installation procedure.

4.1 | Setting Up TCP/IP

To access the Internet through the Router, you must configure the

network settings of the computers on your LAN to use the same IP

subnet as the Router. The default network settings for the Router

are:

Gateway IP Address: 192.168.2.1

Subnet Mask: 255.255.255.0

Configuring Client TCP/IP

14

Note: These settings may be changed to suit your network

requirements, but you must first configure at least

one computer as described in this chapter to access

the Router’s web configuration interface. See

“Configuring the EZ-Stream Wireless Router” on

page 25 for information on configuring the Router.)

If you have not previously configured TCP/IP for your computer, refer

to“Configuring Client TCP/IP” on page 11. The IP address of the

connected client PC should be 192.168.2.x (where x means 2–254).

You can set the IP address for client PCs either by automatically

obtaining an IP address from the Router’s DHCP service or by manual

configuration.

The information outlined here will guide you through the

configuration for the following operating systems:

• Windows 95/98

• Windows Me

• Windows NT

• Windows 2000

• Windows XP

• Apple Macintosh

Configuring Your Computer in Windows 95/98/Me

You may find that the instructions here do not exactly match your

version of Windows. This is because these steps and screenshots were

created in Windows 98. Windows 95 and Windows Millennium Edition

are very similar, but not identical, to Windows 98.

1. From the Windows desktop, click Start/Settings/Control Panel.

2. In the Control Panel, locate and double-click the Network icon.

La pagina si sta caricando...

SMC Networks EZ-Stream SMC2304WBR-AG Manuale utente

SMC Networks EZ-Stream SMC2304WBR-AG Manuale utente

in altre lingue

Documenti correlati

Altri documenti