Oregon Scientific Heart Rate Monitor SE188 Manuale utente

EN

1

Tap On Pro Heart Rate Monitor

Model: SE188

USER MANUAL

1

EN

Tap On Pro

Heart Rate Monitor

Model: SE188

USER MANUAL

CONTENTS

Introduction .................................................................... 2

Key Features .................................................................. 3

Watch ......................................................................... 3

LCD Display ................................................................ 3

Getting Started ............................................................... 4

Unpacking the Watch ................................................. 4

Turning On the Watch (First-Time Use Only) ............. 4

Setting the Keypad Tone / Light Mode / Tap On

Lens ............................................................................ 4

Activating the Backlight .............................................. 5

Activating the Keypad Lock ........................................ 5

Tap On Lens ............................................................... 6

Switching Between Operation Modes ......................... 6

Using the Clock ............................................................. 6

Using the Alarm(s) ........................................................ 7

Setting the Alarm(s) .................................................... 7

Turning the Alarm Sound Off ...................................... 8

Activating / Deactivating the Alarm ............................. 8

Exercise Proﬁle .............................................................. 8

Target Activity ............................................................. 9

Maximum / Lower / Upper Heart Rate Limit ............... 9

Heart Rate Alert .......................................................... 9

User Proﬁle .................................................................. 10

Activity Level ..............................................................11

About the Fitness / Body Mass Index ........................ 11

Fitness Index .............................................................11

Body Mass Index ........................................................ 12

View Fitness / Body Mass Index ............................... 13

Wearing the Chest Belt and Watch ............................. 13

Transmission Signal .................................................. 14

Signal Search ........................................................... 15

About The SMART TRAINING PROGRAM .................. 15

Using the SMART TRAINING PROGRAM ................ 16

View Data while SMART TRAINING PROGRAM

is Running ................................................................. 16

View SMART TRAINING PROGRAM Memory

Records .................................................................... 17

Recovery Heart Rate ................................................ 17

Stopwatch .................................................................... 17

View Data while Stopwatch / Lap is Running ........... 18

View Stopwatch or Lap Memory Records ................. 18

Batteries ....................................................................... 19

Training Information ................................................... 20

How the Heart Rate Monitor Helps You ................... 20

Training Tips ............................................................. 20

Aquatic and Outdoor Activities ................................. 20

Speciﬁcations .............................................................. 21

Precautions .................................................................. 22

About Oregon Scientiﬁc ............................................. 23

EU-Declaration of Conformity .................................... 23

2

EN

INTRODUCTION

Thank you for selecting the Oregon Scientiﬁc

TM

Tap On

Pro Heart Rate Monitor (SE188) watch as your sports

ﬁtness product of choice. This device includes the following

features:

• Heart rate monitor with cordless transmission between

watch and chest belt.

• Digital coding system to reduce environmental

interference.

• Heart rate monitoring system when you go above or

below your upper and lower heart rate limit.

• Visual or sound alert for heart rate thresholds during

training.

• Memory stores heart rate ﬁgures during exercise.

• SMART TRAINING PROGRAM enables you to

complete exercise cycles effectively.

• Tap on lens to conveniently view exercise data.

• Calorie consumption and percent fat burn display

during and after exercise.

• Exercise proﬁle - to calculate your personal heart rate

limit for training.

• User proﬁle - to calculate your ﬁtness index and body

mass index (BMI).

• Stopwatch.

• 99 lap memory storage showing average heart rate and

maximum heart rate.

• Dual alarms with a choice of daily, weekday or weekend

settings.

• Mounting bracket, chest belt and carrying case

included.

• Watch - up to 50 metres water resistant.

• Chest belt - splash proof.

IMPORTANT The use of the SE188 watch is for sport

purposes only and it is not meant to replace any medical

device.

3

EN

KEY FEATURES

WATCH

1. MEM / LAP / - : Display training records; decrease

setting value; mark a lap.

2. MODE: Switch to another display.

3. ST / SP / +: Start / stop timer; increase setting value.

4

/ : Turn on backlight for 3 seconds; lock / unlock

the keypad.

5. SET: Enter Setting Mode; select another setting option;

display different information during training; reset timer

/ stopwatch.

LCD DISPLAY

1. Area 1

2. Area 2

3. Area 3

Area 1

1. TIMER: Smart Training Program is shown or running.

2. TTL: Total exercise time is displayed.

3.

: Keypad lock is enabled.

4. LAP: Shows current lap time or memory lap time.

5. SPLIT: Shows and calculates split time.

6. WARM: Warm-up timer is shown or running.

7. STW: Stopwatch is shown or running.

8.

: Keypad tone is disabled.

9. REST: Recovery timer is shown or running.

4

EN

Area 2

1. MM:DD or DD: MM and day of the week; stopwatch time.

2.

/ : Alarm 1 and 2; waves show when alarm is

activated.

3.

: Cursor highlights the selected alarm in Alarm

Mode.

4. kcal: Calorie unit.

5.

: Light Mode is enabled.

6.

: Tap on lens is enabled.

Area 3

1. Time - HH:MM.

2. AM/PM: Appears when the 12-hour clock / alarm is

being used.

3. AVG: Average heart rate is displayed.

4. MAX: Maximum heart rate is displayed.

5.

: Heart rate is above or below limit; sound alert is

activated.

6. : Flashes when receiving heart rate signal.

7. kglbs: Body weight unit.

8. % FAT: Percentage of fat burn.

9. CM Yr: Height unit; year of user’s birth.

10. LAP: Take lap; lap number.

11. MEM: Stopwatch or timer memory is shown.

12.

: Battery status.

GETTING STARTED

UNPACKING THE WATCH

When you unpack your watch, make sure to keep all the

packing materials in a safe place, in case you need to later

transport or return the product for servicing.

In this box, you will ﬁnd:

• Watch

• Heart rate chest belt

• Mounting bracket

• Carry case

• 2 x CR2032 lithium batteries - already installed

TURNING ON THE WATCH (FIRST-TIME USE ONLY)

Press any key for 2 seconds to activate the LCD display.

SETTING THE KEYPAD TONE / LIGHT MODE /

TAP ON LENS

You can set the watch to have the:

• Keypad “Beep” tone ON or OFF.

5

EN

• Light Mode ON or OFF - see “Activating the Backlight”

section.

• Tap On Lens ON or OFF- see “Tap On Lens” section.

To set these features:

1. Press MODE to navigate to the Real-Time Clock

Mode.

2. Press SET repeatedly until you reach the feature you

wish to change.

3. Press ST / SP / + or MEM / LAP / - to change the

setting.

4. Press SET to conﬁrm the setting and move on to the

next one.

ACTIVATING THE BACKLIGHT

When the Light Mode is set to OFF:

• Press to turn on the backlight for 3 seconds. Press any

other key whilst the light is on and it will extend the light

time by another 3 seconds.

When the Light Mode is set to ON:

• Press any key to turn ON or extend the backlight for 3

seconds.

To help conserve power the Light Mode ON setting will

automatically switch to OFF after 2 hours.

NOTE The backlight does not work when the low battery

icon is shown and will return to normal once the batteries

are replaced.

ACTIVATING THE KEYPAD LOCK

To turn the keypad lock ON or OFF:

6

EN

• Press and hold for 2 seconds. will appear

on the display when the keypad lock is on.

TAP ON LENS

The tap on lens feature gives you easy access to 1 of 6

preset modes:

• Heart rate (HR)

• Stopwatch (STW)

• Smart Training Program (SMART)

• Calorie measurement (CAL)

• Lap timer (LAP)

• Time

To set the tap on lens preset mode:

1. In clock mode, press SET repeatedly until you reach the

tap on lens “ON” display.

2. Press and hold SET to enter the preset modes

selection.

3. Press ST / SP / + or MEM / LAP / - to select the preset

mode.

4. Press SET to conﬁrm.

To use the tap on lens:

Simply tap on the lens and your preset mode will display for

10 seconds before returning to the previous screen.

appears when the tap on lens is activated and ﬂashes

when the preset display is shown.

SWITCHING BETWEEN OPERATION MODES

Press MODE to switch between the 5 operation modes:

• Real-Time Clock

• Alarm Clock

• User Proﬁle / Exercise Proﬁle

• Timer - SMART TRAINING PROGRAM

• Stopwatch

The modes are described in the sections that follow.

NOTE You can run the SMART TRAINING PROGRAM or

stopwatch in the background as you access other modes.

The icon for the mode that is running will ﬂash until you

switch back to that mode.

USING THE CLOCK

The real-time clock is the default display for the watch.

To set the real-time clock:

1. Press MODE to switch to Real-Time Clock Mode.

2. Press and hold SET until the ﬁrst setting ﬂashes.

7

EN

3. Press ST / SP / + or MEM / LAP / - to change the

setting. Hold to speed through the options. Press SET

to conﬁrm the setting and move on to the next one.

4. Repeat step 3 to change other settings for this mode.

The order of the real-time clock settings is:

• 12 / 24 hour clock format

• Hour

• Minute

• Year

• DD:MM or MM:DD date format

• Month

• Day

NOTE The clock is programmed with a 50-year auto-

calendar, which means you do not need to reset the days of

the week and dates each month.

USING THE ALARM(S)

SETTING THE ALARM(S)

Your watch has 2 alarms that can be set to activate daily

(Mon-Sun), on a weekday (Mon-Fri), or on a weekend (Sat

/ Sun).

To set alarm 1 or alarm 2:

1. Press MODE to navigate to Alarm Clock Mode.

2. Press SET to move the cursor to select alarm 1 or alarm

2 and ST / SP / + or MEM / LAP / - to activate

or

deactivate

the alarm.

3. Press and hold SET to enter the setting mode for the

chosen alarm.

4. Press ST / SP / + or MEM / LAP / - to change the

setting. Hold to speed through the options. Press SET

to conﬁrm the setting and move on to the next one.

5. Repeat step 4 to change other settings for this mode.

6. The alarm will automatically be activated once you have

ﬁnished setting the alarm time.

The order of the alarm clock settings is:

• Select daily, weekday or weekend alarm

• Hour

• Minute

8

EN

TURNING THE ALARM SOUND OFF

Press any key to turn the alarm sound off. The alarm will

automatically reset itself unless you deactivate it.

ACTIVATING / DEACTIVATING THE ALARM

1. Press MODE to navigate to Alarm Clock Mode.

2. Press SET to move to the cursor to select alarm 1 or 2.

3. Press ST / SP / + or MEM / LAP / - to activate

or

deactivate

the alarm.

EXERCISE PROFILE

To calculate your minimum and maximum heart rate you

need to set the exercise proﬁle.

Different activities exercise the body in different ways

and help you to achieve a variety of ﬁtness goals. To

accommodate this the exercise proﬁle can be set to suit

different exercise activities. For example, if you are running,

your exercise proﬁle settings are likely to differ from those

you would use when undertaking a weight training activity.

Also, the time you require to warm-up and complete an

exercise will vary. That is why you can change the warm-up

and exercise countdown time to suit you.

To set the exercise proﬁle:

1. Press MODE to navigate to Exercise Proﬁle Mode.

If this screen appears, press SET to navigate to the Exercise

Proﬁle Mode.

2. Press SET to navigate to 1 of the 3 exercise proﬁles.

3. Press and hold SET until the ﬁrst setting ﬂashes.

4. Press ST / SP / + or MEM / LAP / - to change the

setting. Hold to speed through the options. Press SET

to conﬁrm the setting and move on to the next one.

5. Repeat step 4 to change other settings for this mode.

The order of the exercise proﬁle settings is:

• Target activity - 0 to 2

• Lower limit heart rate

• Upper limit heart rate

• Heart rate alert - ON / OFF

• Exercise timer - hour

• Exercise timer - minute

9

EN

• Warm-up timer - set to 5, 10, 15 to activate or 0 mins to

deactivate timer

• Rest timer - ON / OFF

NOTE Once you have set your exercise proﬁle your lower

and upper heart rate limit will be set automatically. However,

you can manually change your upper and lower heart rate

limit if the automatic setting does not suit you. If you change

the target activity level, your upper / lower and maximum

heart rate will automatically be updated.

TARGET ACTIVITY

There are 3 target activity levels:

TARGET ACTIVITY MHR% DESCRIPTION

0 Health

Maintenance

65-78% This is the lowest

training intensity

level. It is good

for beginners and

those who want to

strengthen their

cardiovascular

systems.

1 Aerobic

Exercise

65-85% Increases strength

and endurance. It

works within the

body’s oxygen

intake capability,

burns more

calories, and can be

maintained for a long

period of time.

2 Anaerobic

Exercise

78-90% Generates speed

and power. It works

at or above the

body’s oxygen intake

capability, builds

muscle,and cannot be

maintained for a long

period of time.

MAXIMUM / LOWER / UPPER HEART RATE LIMIT

Before you begin any exercise program and to achieve

maximum health beneﬁts from your workout, it is important

to know your:

• Maximum heart rate (MHR)

• Lower heart rate limit

• Upper heart rate limit

To manually calculate your own heart rate limits, follow the

instructions below:

MHR LOWER LIMIT UPPER LIMIT

MHR =

220 - age

MHR x lower target

activity %.

E.g. Target activity is

0. Lower Limit = MHR

x 65%

MHR x upper target

activity %. E.g.

Target activity is 0.

Upper Limit = MHR

x 78%

HEART RATE ALERT

You can set the heart rate alert in the exercise proﬁle to the

following settings:

10

EN

ICON DESCRIPTION

Heart rate sound alert is OFF

Heart rate sound alert is ON

• 1 beep means you have gone below

your lower zone limit

• 2 beeps means you have gone above

your upper zone limit

When the heart rate alert is activated, a ﬂashing down or up

arrow will appear on the display to show which heart rate

limit you have surpassed.

USER PROFILE

To access the full beneﬁts of the watch, set up your

user proﬁle before you exercise. This will automatically

generate a ﬁtness index and body mass index (BMI). These

calculations along with the calorie and fat % burned will help

you track your progress over time.

To set the user proﬁle:

1. Press MODE to navigate to User Proﬁle Mode.

If this screen appears, press SET repeatedly to navigate

to the User Proﬁle Mode.

2. Press and hold SET until the ﬁrst setting ﬂashes.

3. Press ST / SP / + or MEM / LAP / - to change the setting.

Hold to speed through the options. Press SET to conﬁrm

the setting and move on to the next one.

4. Repeat step 3 to change other settings for this mode.

The order of the user proﬁle settings is:

• Sex

• Year of birth

• Month of birth

• Day of birth

• Weight unit - lbs or kg

• Weight

• Height unit - ft or cm

• Height

• Activity level - 0-2

11

EN

Once you complete your user proﬁle, a ﬁtness index and

body mass index is automatically calculated and displayed

for you. Refer to the “About the Fitness / Body Mass Index”

section for further information.

NOTE You can display and adjust your user proﬁle at any

time.

NOTE You must set up your user proﬁle to use the calorie

count and fat burn features.

ACTIVITY LEVEL

The activity level is based on your own self-assessment of

the amount of exercise you regularly perform.

ACTIVITY

LEVEL

DESCRIPTION

0 Low - You do not usually participate

in programmed recreation sports or

exercise.

1 Medium - You are engaged in modest

physical activity (such as golﬁng, horseback

riding, table tennis, callisthenics, bowling,

weight lifting or gymnastics) 2-3 times a

week, totalling 1 hour per week.

2 High - You actively and regularly

participate in heavy physical exercise

(such as running, jogging, swimming,

cycling, or skipping rope) or engage in

vigorous aerobic exercise (such as tennis,

basketball or handball).

ABOUT THE FITNESS / BODY MASS INDEX

FITNESS INDEX

Your watch will generate a ﬁtness index based on your

aerobic ﬁtness. This index is dependent and limited by the

body’s ability to deliver oxygen to the working muscles in

training. It is often measured by maximum oxygen uptake

(VO2 Max), which is deﬁned as the highest amount

of oxygen that can be utilized when exercising at an

increasingly demanding level. The lungs, heart, blood,

circulatory system, and working muscles are all factors to

determine VO2 Max. The unit of VO2 Max is ml/kg min.

The higher the index, the ﬁtter you are. See the tables below

for a rough guide to what your ﬁtness index means:

Fitness index

egA

RIAF

EGAREVA

DOOG

12

EN

egA

Fitness index

RIAF

EGAREVA

DOOG

BODY MASS INDEX

Your body mass index is a measurement of the relative

percentages of fat and muscle mass in the human body.

HEALTH

INDICATION

BMI

RANGE

DESCRIPTION

Underweight

Less than

20.0

Your body weight is

currently lower than

average. Work toward

healthy, regular food intake

and exercise routine to

build up your health to

recommended levels.

Recommended

20.0 to

25.0

Your health is at the

recommended level.

Maintain a balanced diet

and exercise to keep your

current level of health.

Overweight 25.1 to

29.9

Your body weight may be

above normal. Increase

your exercise and work out

a diet plan to lower your risk

for serious illness.

Obese

30.0 or

greater

At this level, you may be at

risk for heart disease, high

blood pressure, and other

illnesses. Consult with your

doctor to develop a proper

health and ﬁtness plan.

NOTE BMI should not be used as a guideline for health

risks for the following groups:

GROUP REASON

Children and teenagers BMI ranges are only based

on adult heights.

Athletes and body

builders

BMI does not differentiate

between fat and muscle,

thus making it inaccurate

for persons with high muscle

volumes.

Pregnant or nursing

women

This group generates

naturally high fat reserves as

part of the pregnancy.

People over the age

of 65

Fat reserves naturally tend

to be higher with older

persons.

13

EN

NOTE The above BMI information is based on an average

Caucasian physique.

VIEW FITNESS / BODY MASS INDEX

Press MODE to navigate to the User Proﬁle Mode. Then,

press MEM / LAP / - to display your ﬁtness and body mass

index.

NOTE If you have not completed your user proﬁle, these

will not display and “- -” will show on the display.

WEARING THE CHEST BELT AND WATCH

CHEST BELT

The heart rate chest belt is used to count your heartbeat and

transmit the data to the watch. To wear the chest belt:

1. Wet the conductive pads on the underside of the chest

belt with a few drops of water or a conductive gel to

ensure solid contact.

2. Strap the heart rate chest belt across your chest. To

ensure an accurate heart rate signal, adjust the strap

until the belt sits snugly below your pectoral muscles.

TIPS

• The position of the chest belt affects its performance.

Move the chest belt along the strap so that it falls above

your heart.

• Avoid areas with dense chest hair.

• In dry, cold climates, it may take several minutes for the

chest belt to function steadily. This is normal and should

improve with several minutes of exercise.

• To maintain the best performance of your chest belt,

please handle it with care according to the following:

• Do not wrap the chest belt in a wet towel nor

with other wet materials.

• Do not store the chest belt in a hot (about 50°C)

and humid (about 90%) environment.

• Do not place or wash the chest belt under

running water, instead clean it with a wet cloth.

• Do not place the conductive rubber face down

on a metal table or surface.

• Properly dry the chest belt immediately after use.

NOTE If the watch is kept idle without receiving a heart

rate signal for 5 minutes, the Heart Rate Mode will quit and

return to Clock Mode.

14

EN

WATCH

You can wear the receiver watch on your wrist or strap it to

a bike or exercise machine, as shown below.

TRANSMISSION SIGNAL

The heart rate chest belt and watch have a maximum

transmission range of about 62.5 centimetres (25 inches).

They are equipped with the latest digital coding system to

reduce signal interference from the environment, as well

as analog technology. For more accurate readings use the

digital transmission signal. You should only switch to the

analog transmission signal if the situation in point 2 occurs

(see below). Your watch will advise you which system it

is using and the signal status by displaying the following

icons:

NOTE Whenever the watch is searching for the chest

belt signal (manual or automatic search), make sure that

the chest belt is no further than 10 cm (4 inches) from the

watch.

ICON DESCRIPTION

Outside heart is

ﬂashing

Searching for a signal

Inside heart is

ﬂashing

A signal has been found

and the digital system is

being used

Heart is ﬂashing

A signal has been found

and the analog system is

being used

/

No signal has been found

NOTE To switch from digital to analog or analog to digital

system, press the chest belt button for more than 4 seconds

and then force a signal search.

IMPORTANT If the heart icon does not appear on the

display or is not ﬂashing because no signal has been found,

force a signal search. See “Signal Search” section on how

to do this.

In the event that you experience a weak signal or your signal

is disrupted by interference in the environment, follow the

instructions below to identify and resolve the situation.

1. The signal is weak - the watch heart rate monitor will

only show “0”:

• Shorten the distance between the heart rate chest

belt and watch.

• Re-adjust the position of the heart rate chest

belt.

• Check the conductive pads are moist enough to

ensure solid contact.

15

EN

• Check the batteries. If they are low or exhausted,

the transmission range may be shortened.

• Force a signal search (see “Signal Search” section).

2. The gym equipment does not seem to work with your

chest belt and the digital icon

is displayed:

• Most gym equipment is compatible with the

analog system

. Press and hold the chest belt

button for more than 4 seconds to change from

digital to analog. Then force a signal search

(see “Signal Search” section).

3. Interference from another person’s heart rate monitor

- their heart rate readings appear on your watch, or the

heart rate monitor shows “0”:

• Press the chest belt button to get the watch to

receive your chest belt signal. Do not press and

hold the chest belt button, as it will change the

transmission signal from digital to analog.

4. The signal is jammed - the heart rate reading on your

watch is ﬂashing:

• There is too much interference in the

environment for your heart rate monitor to

function. Move to an area where the heart

rate reading stops ﬂashing.

WARNING Signal interference in the environment can be

caused by electromagnetic disturbances. These may occur

near high voltage power lines, trafﬁc lights, overhead lines

of electric railways, electric bus lines or trams, televisions,

car motors, bike computers, some motor driven exercise

equipment, cellular phones or when you walk through

electric security gates. Under interference, the heart rate

reading may become unstable and inaccurate.

SIGNAL SEARCH

To force a signal search:

1. Press MODE to navigate to the SMART TRAINING

PROGRAM or Stopwatch Mode.

2. Press and hold MODE for 2 seconds. The signal-

searching icon with the outside ﬂashing will appear to

conﬁrm a signal search is taking place. Whenever the

watch is searching for the chest belt signal make sure

that the chest belt is no further than 10 cm (4 inches)

from the watch.

The signal search will take approximately 10 seconds. If

after 10 seconds the heart icon is not ﬂashing, then your

signal search has been unsuccessful and you need to force

another signal search.

See the table in the “Transmission Signal” section for more

signal status information.

ABOUT THE SMART TRAINING PROGRAM

The SMART TRAINING PROGRAM enables you to

complete exercise cycles effectively. It will guide you through

from a 5-minute warm up (default setting), to the end of your

exercise program. In addition to monitoring your heart rate

16

EN

and alerting you whenever you fall out of the range for the

selected training zone, the Program allows you to check the

calories consumed and the percentage of fat burned.

USING THE SMART TRAINING PROGRAM

The SMART TRAINING PROGRAM monitors your exercise

performance once you have entered your user proﬁle and

exercise proﬁle.

NOTE You cannot use the SMART TRAINING PROGRAM

if you are running the stopwatch.

To enter the SMART TRAINING PROGRAM:

1. Press MODE to navigate to Timer Mode.

2. Press and hold SET. Press ST / SP / + or MEM / LAP

/ - to select 1 of the 3 exercise proﬁles. Press SET to

conﬁrm and enter the SMART TRAINING PROGRAM.

3. To start or stop the warm-up, exercise or rest countdown

timer, press ST / SP / +.

4. To bypass a countdown timer and move onto the next

one, press and hold ST / SP / +.

5. To reset the timer, press and hold SET.

The order of the Timer Mode is:

• Warm-up time

- The warm-up will not display if it has been

set to “0” in the exercise proﬁle.

• Exercise time -The exercise time is set in the exercise

proﬁle.

• Rest time

- The rest time is automatically set to 3 mins

and cannot be changed. When the timer

reaches “0”, the recovery heart rate will appear.

- The rest time will not display if it has been set to

“OFF” in the exercise proﬁle.

VIEW DATA WHILE SMART TRAINING PROGRAM

IS RUNNING

During warm-up, exercise or rest time countdown, press SET

to view and toggle between the following screen displays:

• Remaining warm-up / exercise / rest time with current

heart rate

or

17

EN

or

• Current calorie and fat burn level

• Clock with current heart rate

VIEW SMART TRAINING PROGRAM MEMORY

RECORDS

When the SMART TRAINING PROGRAM has been

completed, press MEM / LAP / - to view the “total time /

maximum heart rate” record, then press SET to view the

following records:

• Recovery heart rate / average heart rate

• Total calorie and fat burn level

• In zone time: Time spent without exceeding your upper

or lower heart rate limit

• Above zone time: Time spent exceeding your upper

heart rate limit

• Below zone time: Time spent exceeding your lower

heart rate limit

NOTE You cannot use the stopwatch if you are running the

SMART TRAINING PROGRAM.

RECOVERY HEART RATE

Your recovery heart is a good indication of cardiovascular

ﬁtness. The faster your heart rate recovers after exercise,

the better shape you are in. The watch uses a time-based

recovery method, which checks your recovery heart rate 3

minutes after exercise.

Compare your recovery heart rate between exercise

sessions to track the effect your exercise is having.

STOPWATCH

The stopwatch function is particularly beneﬁcial to use when

you are unsure how long your activity will take, or when you

18

EN

want to measure the time it takes to complete a task and

your performance over that time. You can also take lap and

split time readings when using the stopwatch function.

To get the most out of your stopwatch function complete

your user and exercise proﬁle. If you have not completed

the user proﬁle you will be unable to use the calorie and fat

burn function.

Press MODE to navigate to Stopwatch Mode. You can now

perform the following functions:

TASK INSTRUCTION

Start stopwatch Press ST / SP / +

Pause / resume

stopwatch

Press ST / SP / +

Reset Press and hold SET

Save lap

Press MEM / LAP / - while the

stopwatch is running

NOTE Up to 99 laps / 99 hrs,

59 mins total can be stored in

the memory

Select exercise

proﬁle for stopwatch

Reset the stopwatch. Press

and hold SET

NOTE The stopwatch begins measurement in min:

sec:1/100 sec. After 59 minutes pass, the display will

change to hrs:min:sec.

VIEW DATA WHILE STOPWATCH / LAP

IS RUNNING

While the stopwatch or lap functions are being used, press SET

to view and toggle between the following screen displays:

• Total time / split time and current heart rate

• Lap time and current heart rate (if enabled)

• Current calorie and fat burn level

• Clock with current heart rate

If the battery is low when taking a lap, this screen will appear

and no more laps will be saved.

VIEW STOPWATCH OR LAP MEMORY RECORDS

To view stopwatch records:

1. The stopwatch must be stopped (press ST / SP / +).

2. Press MEM / LAP / -, then press SET.

The stopwatch records will appear in the following order:

• Total time / maximum heart rate

• Total time / average heart rate

• Calories / fat burn total

• In zone time: Time spent without exceeding your upper

or lower heart rate limit

• Above zone time: Time spent exceeding your upper

heart rate limit

• Below zone time: Time spent exceeding your lower

heart rate limit

19

EN

To view lap records:

1. The stopwatch must be stopped (press ST / SP / +).

2. Press MEM / LAP / -, then press ST / SP / + or MEM /

LAP / - to select lap.

3. Press SET to view lap record.

The lap records will appear in the following order:

• Lap time / maximum heart rate

• Split time / average heart rate

• Calorie and fat burn total - per lap

• In zone time - per lap: Time spent without exceeding

your upper or lower heart rate limit

• Above zone time - per lap: Time spent exceeding your

upper heart rate limit

• Below zone time - per lap: Time spent exceeding your

lower heart rate limit

BATTERIES

The SE188 uses two CR2032 lithium batteries, one for the

watch and another for the heart rate chest belt. Both are

already installed. See the table below for battery warnings.

LOW BATTERY ICON DESCRIPTION

/

The battery is too low

to run the backlight

The chest belt battery is

nearly too low to send a

signal to the watch

The batteries typically last one year.

To replace the watch battery:

1. Undo the screws and remove the back plate.

2. Using a thin blunt instrument, hook the release catch

and lift the clip.

3. Replace the old battery and then the battery clip.

4. Replace the back plate and screws.

To replace the chest belt battery:

1. Using a coin, twist the battery door counter-clockwise

until it clicks out of place.

La pagina sta caricando ...

Oregon Scientific Heart Rate Monitor SE188 Manuale utente

Questo manuale è adatto anche per

Oregon Scientific Heart Rate Monitor SE188 Manuale utente

in altre lingue

Documenti correlati

Altri documenti