Bryton Cardio 35 Manuale utente

Categoria
Orologi sportivi
Tipo
Manuale utente
START/PAUSE/
STOP/UP
LAP/MODE/DOWN
POWER/BACK/
BACKLIGHT ON
OK/SETTING/PAGE
Cardio 35
Users Guide
bb.brytonsport.com
EN
1
2
3
4
2
EN
Contents
Introduction ................................ 3
Getting Started........................... 4
Buttons .......................................... 6
Clock View .................................... 7
Clock Settings .................................8
Exercise/Training .......................10
Start / Pause / Stop Exercising ..10
Mark Lap ...........................................11
View Exercise/Training Info .......12
Training Settings ........................ 13
Set Training .....................................13
Set LAP training .............................17
Link Sensors ....................................18
View Exercise/Training
Record ...............................................21
Using Stopwatch ...........................21
Stride Length ..................................22
Auto Scrolling .................................23
Clear Storage ..................................23
Icons ............................................... 24
Specications .............................. 25
Screen Terminologies ............... 26
EN
3
Introduction
Cardio 35 GPS sports watch is for casual activities and professional
training. Cardio 35 can accurately calculate and record your
location, speed, distance, pace, stride rate, calories, cadence*, heart
rate* and more. Your training results can be shared and analyzed
at brytonsport.com. With the built-in sensor, no extra foot pod
is needed for indoor exercise. Cardio 35 is for both running and
cycling activities.
Package Contents
Make sure the following items are in the box:
Cardio 35•
USB cable•
Users Guide•
Optional accessories:
Heart rate monitor•
Speed / Cadence sensor•
* HRM or SPD/CAD sensor is required.
4
EN
Getting Started
Step 1. Connect, Sync, and Charge
1. Connect Cardio 35 to a PC using the supplied USB cable.
2. Download the Bryton Bridge 2 application at bb.brytonsport.com
and sync with Cardio 35.
Step 2. Turn On
Press button 1 to turn on Cardio 35.
Note: To turn o, long press button 1 for 5 seconds.
Step 3. Initial Setup
For rst time use, do the following:
1. Select your preferred language.
2. Select the unit of measurement.
3. Enter your user prole (recommended).
Note: Data accuracy will highly aect your training analysis.
4. Select you preferred date format.
Keep Cardio 35 connected to
the PC to charge the battery.
Note: For rst time use, charge the
battery for at least 2.5 hours.
EN
5
Step 4. Start a training or exercise
Cardio 35 operates in three major modes:
Clock View
Exercise
3
5. Enter your max heart rate.
6. Go outdoors to acquire GPS signal. Once the GPS signal is xed,
Cardio 35 automatically sets the date and time. To manually set
the date and time, refer to Time settings (see page 8).
7. Press button 2 to complete setup.
Training
2
1
Note: During pairing process (with heart
rate monitor/foot pod/cadence sensor/
speed sensor), the LED indicators (on the
top of the icons) will blink. When the sensors
are successfully linked to the device, the LED
indicators will light on.
Activity type
(Bike or Run)
Note: If you want to change your prole, please connect your device to
Brytonsport.com and change the setting via My Device -> Manage Device Data.
Or go to Settings > Others > Prole and change your settings.
6
EN
Buttons
Cardio 35 has four buttons that are used for multiple functions.
Power/BACK (1)
Press to turn on Cardio 35. Press and •
hold to turn it o.
After a training/exercise is stopped, •
press to switch to clock view.
In Setting and Stopwatch modes, •
press to go back to clock view.
OK (2)
In Clock view, press to access Setting.•
In Exercise/Training, press to scroll •
your exercise data.
• InSetting,presstoenterorconrma
selection.
In Stopwatch, press to view the le •
for lap data.
START/STOP (3)
In Clock view, press to start/pause/•
stop exercise, and it will also start/
pause/stop recording at the same
time.
In Setting, press to move up to scroll •
through menu options.
4
3
2
1
In Stopwatch, press to start/stop the •
stopwatch.
LAP (4)
In Clock view, press to switch Bike or •
Run mode.
In Exercise or Stopwatch, press to •
mark lap.
In Setting, press to move down to •
scroll through menu options.
After stopwatch is stopped, press to •
reset the stopwatch.
EN
7
The table below provides a graphical indication on using the
buttons which will be used in later sections.
Buttons Indication
Power/BACK 1
OK 2
START/STOP 3 /
LAP 4 /
Clock View
There are two types of clock view:
Type 1: Display current time (HH:MM) and date (MM-DD).
Battery Status Icon
Exercise mode
Run/Bike mode
Date
MM/DD
Type 2: Display current time (HH:MM) and secondary time (24-hour
format).
Time 2
Secondary time
Current Time
Alarm Icon
Note: By default, “Date” is displayed at
Time 2” location. If you want to display
secondary time, please see “Display/Hide
Time 2” on page 9.
8
EN
Clock Settings
Auto Calibration by GPS
Use this setting to reset the date and time based on your GPS
location.
Set Alarm
Use this setting to set alarm with Cardio 35.
(Select time format)
(Current time is set)TIME GPS TIME
* indicates screen changes, no button is pressed.
(Time is set)
2 2 2
2
(Alarm is set)
(If O, skip this step)
TIME
ALARM
ON
OFF
2 2 2
2
2
EN
9
Display/Hide Time 2
Use this setting to display/hide Time2.
(Time 2 display)
(Time 2 is set)
Set Daylight Saving Time
Use this setting to set the daylight saving time.
(Daylight saving time is set)
(Select setting)
Note: After you hide Time 2, Clock view will show Date below current time.
TIME
TIME 2
ON
OFF
2 2 2
2
TIME
Daylight Saving
Time
2 2 2
2
2
10
EN
Start / Pause / Stop Exercising
Press button 3
to start, pause, or end an activity.
Display item
Recording indicator
Exercise type
Display data
GPS signal
Exercise/Training
During exercise or training, Cardio 35 allows you to measure
and record your running activities and displays your current
performance.
You can choose the following activity type:
Bike Mode •
Run Mode•
Note:
Displayed information varies on exercise mode and user preference.•
You can switch Bike or Run mode while in clock view by pressing button • 4.
Before you start
Link sensors (page 18), optional•
EN
11
Note: Please go outdoors to acquire GPS signal when you see “FIND GPS” on the
screen.
Mark Lap
1. Start an activity rst by pressing button 3.
2. Press button 4 to mark lap.
Recording time
Lap number
01 -- Minute
2H -- Hour
00 -- Second
(Acquire GPS
signal)
YES
NO
3
4
2
3
12
EN
View Exercise/Training Info
Run Mode
CALORIESPACE DISTANCETIMER
Note: If Heart Rate sensor and foot pod are detected, the exercise info will be
displayed as following order:
HEART RATE > FOOT POD > PACE > TIMER > DISTANCE > CALORIES > CLOCK.
Bike Mode
Note: If Heart Rate, Cadence, or Combo sensor is detected, the exercise info will be
displayed as following order:
HEART RATE > CADENCE > COMBO > SPEED > DISTANCE > TIMER > CALORIES.
3 2 2 2
CALORIESSPEED TIMERDISTANCE
3 2 2 2
2
2
EN
13
Note: The type of data displayed depends on the current mode:
If you have marked laps, press • button 4 to see Lap info.
Interval time appears only when training is set to interval training.•
ETA (Estimated Time of Arrival) appears only when training is set to distance.•
If the screen below appears, the device cannot detect the sensor. Adjust the •
sensor and connect again.
Training Settings
You can customize the training settings, link the sensors, view
history, and other settings.
Set Training
Use the Training setting to select the type of training you want.
Training can be based on time, distance, calories burn, heart rate,
pace, speed, or interval.
No sensor is detected
14
EN
Note:
During training set up, the display screen varies depending on selected training.•
After setting the Training mode, press • button 3
to record the results of your
training.
If you want to cancel it, press • button 1 to go back to clock view.
By Time/Distance / Calories
Training can be set by time, distance, or calories burned.
(Set value)
(Start log for training)
TRAINING TIME
DISTANCE
CALORIES
2 2 2 3
1
EN
15
By Heart Rate / Pace / Speed
Training can be set by heart rate, pace, or speed.
(Set value)TRAINING MAXIMUM
VALUE
HEART RATE
PACE
SPEED
(Set value) MINIMUM
VALUE
TIME
2 2 2 2
2
2
DISTANCE
SKIP
(Set value)
(Set value)
(Start log for training)
2
2
2
2
2
34
34
2
16
EN
By Interval
Use the Interval setting to specify the interval between training,
warm up, and cool down time. By default, warm up and cool down
time are set to 5 minutes.
(Set value)
YES
NO
(Set Heart rate)
TIME
DISTANCE
TIME
DISTANCE
(Set Rest setting)
YES
NO
(Set Heart rate)
(Set value)
TRAINING INTERVAL SET
YES
NO
(Set Cool down)
(Set number of
times to repeat)
(Start log for training)
(If YES, select Target zone)
ZONE 1
ZONE 7
(If YES, select Target zone)
ZONE 1
ZONE 7
Note: Your last interval
setting will be saved in
“SAVED” option. You can
choose and start the saved
interval training right away.
SAVED
YES
NO
(Set Warm up)
2 2 2
3
4
2
22
2 2 2
2
222 2
(Start log for
training)
2
2
EN
17
Use Lap by Location setting to set your current location as the lap
point. Upon reaching the lap point, Cardio 35 will automatically
mark the lap.
Set LAP training
Use Lap by Distance to specify the distance of each lap. After
running a specied distance, Cardio 35 will automatically mark the
lap.
LAP (Start log for LAP)LOCATION
(Start log for LAP)
LAP (Set value)DISTANCE
2 2 2 2
2
2 2 2
2
18
EN
Run Mode
Link Sensors
Use the Link setting to pair sensors and other optional accessories
to Cardio 35.
Bike Mode
Speed sensor
LINK (Current HR data)SCAN
(Set Wheel Size)
LINK
Heart Rate
sensor
SCAN
Cadence
sensor
Note: To view and check data on the connected sensor(s), select “LINK > INFO”.
Heart Rate
sensor
(Current Speed data)
Foot pod sensor
2 2
2
1
2
(Current Cadence data)
2 2
2
2 2 2
(Current HR data)
(Current Foot pod
data)
EN
19
Calibrate Foot Pod
LINK CALIBRATEFACTOR (Prepare to run 800m)
(DONE - Calibration complete)
(FAIL - Fail to complete 800m run)
(Start running)
Complete 800m?
2 2 2 2
331
LINK SETFACTOR
Set foot pod length manually
2 2 2
(Set value) (Current value)
2
2
20
EN
Press button 2 to conrm and move to search next item. If you do not want to
connect the current detected sensor, press button 1 to abort.
Be sure to keep the distance between the similar sensors approximately 30 meters.•
If you see below illustration on the screen, this indicates that there are more than 2 •
sensors are detected. Press button 1 to rescan the sensor.
Note:
When t• he sensors are successfully connected, Cardio 35 will release a short beep
and the LED indicators (on the top of the icons) will blink for 5 seconds.
Once connected, the sensor ID will be displayed on the screen. •
For example:
Heart Rate sensor
Sensor ID
Current data
(Current heart rate and sensor
ID is display)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182

Bryton Cardio 35 Manuale utente

Categoria
Orologi sportivi
Tipo
Manuale utente