ASROCK X58 EXTREME - Guida d'installazione

11

1

ASRock X58 Extreme Motherboard

EnglishEnglish

English

Copyright Notice:Copyright Notice:

Copyright Notice:

No part of this installation guide may be reproduced, transcribed, transmitted, or trans-

lated in any language, in any form or by any means, except duplication of documen-

tation by the purchaser for backup purpose, without written consent of ASRock Inc.

Products and corporate names appearing in this guide may or may not be registered

trademarks or copyrights of their respective companies, and are used only for identifica-

tion or explanation and to the owners’ benefit, without intent to infringe.

Disclaimer:Disclaimer:

Disclaimer:

Specifications and information contained in this guide are furnished for informational

use only and subject to change without notice, and should not be constructed as a

commitment by ASRock. ASRock assumes no responsibility for any errors or omissions

that may appear in this guide.

With respect to the contents of this guide, ASRock does not provide warranty of any kind,

either expressed or implied, including but not limited to the implied warranties or

conditions of merchantability or fitness for a particular purpose. In no event shall

ASRock, its directors, officers, employees, or agents be liable for any indirect, special,

incidental, or consequential damages (including damages for loss of profits, loss of

business, loss of data, interruption of business and the like), even if ASRock has been

advised of the possibility of such damages arising from any defect or error in the guide

or product.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

The Lithium battery adopted on this motherboard contains Perchlorate, a toxic

substance controlled in Perchlorate Best Management Practices (BMP) regulations

passed by the California Legislature. When you discard the Lithium battery in

California, USA, please follow the related regulations in advance.

“Perchlorate Material-special handling may apply, see

www.dtsc.ca.gov/hazardouswaste/perchlorate”

ASRock Website: http://www.asrock.com

Published June 2009

22

2

ASRock X58 Extreme Motherboard

EnglishEnglish

English

Motherboard LayoutMotherboard Layout

Motherboard Layout

1 PS2_USB_PWR1 Jumper 20 Debug LED

2 CPU Fan Connector (CPU_FAN1) 21 Reset Switch (RSTBTN)

3 ATX 12V Power Connector (ATX12V1) 22 Power Switch (PWRBTN)

4 1366-Pin CPU Socket 23 Chassis Fan Connector (CHA_FAN1)

5 Power Fan Connector (PWR_FAN1) 24 Clear CMOS Jumper (CLRCMOS1)

6 Chassis Fan Connector (CHA_FAN2) 25 USB 2.0 Header (USB10_11, Blue)

7 3 x 240-pin DDR3 DIMM Slots 26 8Mb SPI Flash

(Triple Channel: DDR3_A1, DDR3_B1, DDR3_C1 27 TPM Header (TPM1)

; White) 28 COM Port Header (COM1)

8 ATX Power Connector (ATXPWR1) 29 Floppy Connector (FLOPPY1)

9 System Panel Header (PANEL1, Orange) 30 HDMI_SPDIF Header

10 Front Panel IEEE 1394 Header (HDMI_SPDIF1, Yellow)

(FRONT_1394, Red) 31 PCI Express x16 Slot (PCIE5, Orange)

11 USB 2.0 Header (USB8_9, Blue) 32 PCI Slots (PCI2)

12 3 x 240-pin DDR3 DIMM Slots 33 Infrared Module Header (IR1)

(Triple Channel: DDR3_A2, DDR3_B2, DDR3_C2 34 PCI Express x16 Slot (PCIE4, Blue)

; Blue) 35 PCI Slots (PCI1)

13 North Bridge Controller 36 PCI Express x1 Slot (PCIE3, White)

14 Primary IDE Connector (IDE1, Blue) 37 PCI Express x16 Slot (PCIE2, Blue)

15 SATAII Connector (SATAII_1_2, Red) 38 PCI Express x1 Slot (PCIE1, White)

16 SATAII Connector (SATAII_3_4, Red) 39 North Bridge Fan Connector (NB_FAN1)

17 SATAII Connector (SATAII_5_6, Red) 40 Internal Audio Connector: CD1 (Black)

18 South Bridge Controller 41 Front Panel Audio Header

19 Chassis Speaker Header (SPEAKER 1, Purple) (HD_AUDIO1, Lime)

33

3

ASRock X58 Extreme Motherboard

EnglishEnglish

English

I/O PI/O P

I/O P

anelanel

anel

To enable Multi-Streaming function, you need to connect a front panel audio cable to the front

panel audio header. After restarting your computer, you will find “Mixer” tool on your system.

Please select “Mixer ToolBox” , click “Enable playback multi-streaming”, and click

“ok”. Choose “2CH”, “4CH”, “6CH”, or “8CH” and then you are allowed to select “Realtek HDA

Primary output” to use Rear Speaker, Central/Bass, and Front Speaker, or select “Realtek

HDA Audio 2nd output” to use front panel audio.

** If you use 2-channel speaker, please connect the speaker’s plug into “Front Speaker Jack”.

See the table below for connection details in accordance with the type of speaker you use.

TABLE for Audio Output Connection

Audio Output Channels Front Speaker Rear Speaker Central / Bass Side Speaker

(No. 10) (No. 7) (No. 8) (No. 6)

2 V -- -- --

4VV----

6 VVV--

8 VVVV

1 PS/2 Mouse Port (Green) ** 10 Front Speaker (Lime)

2 Coaxial SPDIF Out Port 11 Microphone (Pink)

3 USB 2.0 Port (USB0) 12 USB 2.0 Ports (USB67)

4 IEEE 1394 Port (IEEE 1394) 13 USB 2.0 Ports (USB45)

* 5 LAN RJ-45 Port 14 USB 2.0 Ports (USB23)

6 Side Speaker (Gray) 15 Powered eSATAII/USB Connector

7 Rear Speaker (Black) 16 Optical SPDIF Out Port

8 Central / Bass (Orange) 17 Clear CMOS Switch (CLRCBTN)

9 Line In (Light Blue) 18 PS/2 Keyboard Port (Purple)

LAN Port

ACT/LINK

LED

SPEED

LED

* There are two LED next to the LAN port. Please refer to the table below for the LAN port LED

indications.

LAN Port LED Indications

Activity/Link LED SPEED LED

Status Description Status Description

Off No Link Off 10Mbps connection

Blinking Data Activity Orange 100Mbps connection

On Link Green 1Gbps connection

44

4

ASRock X58 Extreme Motherboard

EnglishEnglish

English

1. Introduction1. Introduction

1. Introduction

Thank you for purchasing ASRock X58 Extreme motherboard, a reliable motherboard

produced under ASRock’s consistently stringent quality control. It delivers excellent

performance with robust design conforming to ASRock’s commitment to quality and

endurance.

This Quick Installation Guide contains introduction of the motherboard and step-by-step

installation guide. More detailed information of the motherboard can be found in the user

manual presented in the Support CD.

Because the motherboard specifications and the BIOS software might

be updated, the content of this manual will be subject to change without

notice. In case any modifications of this manual occur, the updated

version will be available on ASRock website without further notice. You

may find the latest VGA cards and CPU support lists on ASRock website

as well. ASRock website http://www.asrock.com

If you require technical support related to this motherboard, please visit

our website for specific information about the model you are using.

www.asrock.com/support/index.asp

1.1 Package Contents1.1 Package Contents

1.1 Package Contents

ASRock X58 Extreme Motherboard

(ATX Form Factor: 12.0-in x 9.6-in, 30.5 cm x 24.4 cm)

ASRock X58 Extreme Quick Installation Guide

ASRock X58 Extreme Support CD

1 x 80-conductor Ultra ATA 66/100/133 IDE Ribbon Cable

1 x Ribbon Cable for a 3.5-in Floppy Drive

4 x Serial ATA (SATA) Data Cables (Optional)

2 x Serial ATA (SATA) HDD Power Cables (Optional)

1 x I/O Panel Shield

1 x ASRock SLI_Bridge_2S Card

55

5

ASRock X58 Extreme Motherboard

EnglishEnglish

English

1.21.2

1.2

SpecificationsSpecifications

Specifications

Platform - ATX Form Factor: 12.0-in x 9.6-in, 30.5 cm x 24.4 cm

- All Solid Capacitor design (100% Japan-made high-quality

Conductive Polymer Capacitors)

CPU - Intel

®

Socket 1366 Core

TM

i7 Processor Extreme Edition /

Core

TM

i7 Processor Supports Intel

®

Dynamic Speed

Technology

- System Bus up to 6400 MT/s; Intel

®

QuickPath Interconnect

- Advanced V8 Power Phase Design

- Supports Hyper-Threading Technology (see CAUTION 1)

- Supports Untied Overclocking Technology (see CAUTION 2)

- Supports EM64T CPU

Chipset - Northbridge: Intel

®

X58

- Southbridge: Intel

®

ICH10R

Memory - Triple Channel DDR3 Memory Technology (see CAUTION 3)

- 6 x DDR3 DIMM slots

- Supports DDR3 2000(OC)/1866(OC)/1600(OC)/1333(OC)/

1066 non-ECC, un-buffered memory

- Supports DDR3 ECC, un-buffered memory with Intel

®

Workstation 1S Xeon

®

processors 3500 series

- Max. capacity of system memory: 24GB (see CAUTION 4)

- Supports Intel

®

Extreme Memory Profile (XMP)

Expansion Slot - 3 x PCI Express 2.0 x16 slots

(blue @ x16 mode, orange @ x4 mode)

(Double-wide slot spacing between each PCI-E slot)

- 2 x PCI Express x1 slots

- 2 x PCI slots

- Supports ATI

TM

CrossFireX

TM

, 3-Way CrossFireX

TM

and Quad

CrossFireX

TM

- Supports NVIDIA

®

SLI

TM

and Quad SLI

TM

Audio - 7.1 CH Windows

®

Vista

TM

Premium Level HD Audio with

Content Protection

- DAC with 110dB dynamic range (ALC890 Audio Codec)

LAN - PCIE x1 Gigabit LAN 10/100/1000 Mb/s

- Realtek RTL8111DL

- Supports Wake-On-LAN

Rear Panel I/O I/O Panel

- 1 x PS/2 Mouse Port

- 1 x PS/2 Keyboard Port

- 1 x Coaxial SPDIF Out Port

66

6

ASRock X58 Extreme Motherboard

EnglishEnglish

English

- 1 x Optical SPDIF Out Port

- 7 x Ready-to-Use USB 2.0 Ports

- 1 x Powered eSATAII/USB Connector

- 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED)

- 1 x IEEE 1394 Port

- 1 x Clear CMOS Switch

- HD Audio Jack: Side Speaker/Rear Speaker/Central/Bass/

Line in/Front Speaker/Microphone (see CAUTION 5)

Connector - 6 x SATAII 3.0Gb/s connectors, support RAID (RAID 0,

RAID 1, RAID 10, RAID 5 and Intel Matrix Storage), NCQ,

AHCI and “Hot Plug” functions (see CAUTION 6)

- 1 x ATA133 IDE connector (supports 2 x IDE devices)

- 1 x Floppy connector

- 1 x IR header

- 1 x COM port header

- 1 x HDMI_SPDIF header

- 1 x IEEE 1394 header

- 1 x TPM header

- CPU/Chassis/NB/Power FAN connector

- 24 pin ATX power connector

- 8 pin 12V power connector

- CD in header

- Front panel audio connector

- 2 x USB 2.0 headers (support 4 USB 2.0 ports)

(see CAUTION 7)

Quick Switch - 1 x Clear CMOS Switch

- 1 x Power Switch

- 1 x Reset Switch

BIOS Feature - 8Mb AMI BIOS

- AMI Legal BIOS

- Supports “Plug and Play”

- ACPI 1.1 Compliance Wake Up Events

- Supports jumperfree

- SMBIOS 2.3.1 Support

- CPU, DRAM, NB, SB, VTT Voltage Multi-adjustment

- Supports I. O. T. (Intelligent Overclocking Technology)

- Supports Smart BIOS

Support CD - Drivers, Utilities, AntiVirus Software (Trial Version)

Unique Feature - ASRock OC Tuner (see CAUTION 8)

- Intelligent Energy Saver (see CAUTION 9)

- Instant Boot

- ASRock Instant Flash (see CAUTION 10)

77

7

ASRock X58 Extreme Motherboard

EnglishEnglish

English

CAUTION!

1. About the setting of “Hyper Threading Technology”, please check page 58

of “User Manual” in the support CD.

2. This motherboard supports Untied Overclocking Technology. Please read

“Untied Overclocking Technology” on page 35 for details.

3. This motherboard supports Triple Channel Memory Technology. Before

you implement Triple Channel Memory Technology, make sure to read the

installation guide of memory modules on page 14 for proper installation.

4. Due to the operating system limitation, the actual memory size may be

less than 4GB for the reservation for system usage under Windows

®

XP

and Windows

®

Vista

TM

. For Windows

®

XP 64-bit and Windows

®

Vista

TM

64-

bit with 64-bit CPU, there is no such limitation.

5. For microphone input, this motherboard supports both stereo and mono

modes. For audio output, this motherboard supports 2-channel, 4-channel,

6-channel, and 8-channel modes. Please check the table on page 3 for

proper connection.

6. Before installing SATAII hard disk to SATAII connector, please read the

“SATAII Hard Disk Setup Guide” on page 42 of “User Manual” in the support

CD to adjust your SATAII hard disk drive to SATAII mode. You can also

connect SATA hard disk to SATAII connector directly.

7. Power Management for USB 2.0 works fine under Microsoft

®

Windows

®

Vista

TM

64-bit / Vista

TM

/ XP 64-bit / XP SP1 or SP2.

WARNING

Please realize that there is a certain risk involved with overclocking, including adjusting

the setting in the BIOS, applying Untied Overclocking Technology, or using the third-

party overclocking tools. Overclocking may affect your system stability, or even

cause damage to the components and devices of your system. It should be done at

your own risk and expense. We are not responsible for possible damage caused by

overclocking.

- Hybrid Booster:

- CPU Frequency Stepless Control (see CAUTION 11)

- ASRock U-COP (see CAUTION 12)

- Boot Failure Guard (B.F.G.)

Hardware - CPU Temperature Sensing

Monitor - Chassis Temperature Sensing

- CPU/Chassis/NB/Power Fan Tachometer

- CPU Quiet Fan

- Voltage Monitoring: +12V, +5V, +3.3V, CPU Vcore

OS - Microsoft

®

Windows

®

XP / XP 64-bit / Vista

TM

/ Vista

TM

64-bit

compliant

Certifications - FCC, CE, WHQL

* For detailed product information, please visit our website: http://www.asrock.com

88

8

ASRock X58 Extreme Motherboard

EnglishEnglish

English

8. It is a user-friendly ASRock overclocking tool which allows you to surveil

your system by hardware monitor function and overclock your hardware

devices to get the best system performance under Windows

®

environment.

Please visit our website for the operation procedures of ASRock OC

Tuner. ASRock website: http://www.asrock.com

9. Featuring an advanced proprietary hardware and software design,

Intelligent Energy Saver is a revolutionary technology that delivers

unparalleled power savings. In other words, it is able to provide exceptional

power saving and improve power efficiency without sacrificing computing

performance. Please visit our website for the operation procedures of

Intelligent Energy Saver.

ASRock website: http://www.asrock.com

10. ASRock Instant Flash is a BIOS flash utility embedded in Flash ROM.

This convenient BIOS update tool allows you to update system BIOS

without entering operating systems first like MS-DOS or Windows

®

. With

this utility, you can press <F6> key during the POST or press <F2> key to

BIOS setup menu to access ASRock Instant Flash. Just launch this tool

and save the new BIOS file to your USB flash drive, floppy disk or hard

drive, then you can update your BIOS only in a few clicks without prepar-

ing an additional floppy diskette or other complicated flash utility. Please

be noted that the USB flash drive or hard drive must use FAT32/16/12 file

system.

11. Although this motherboard offers stepless control, it is not recommended

to perform over-clocking. Frequencies other than the recommended CPU

bus frequencies may cause the instability of the system or damage the

CPU.

12. While CPU overheat is detected, the system will automatically shutdown.

Before you resume the system, please check if the CPU fan on the

motherboard functions properly and unplug the power cord, then plug it

back again. To improve heat dissipation, remember to spray thermal

grease between the CPU and the heatsink when you install the PC system.

99

9

ASRock X58 Extreme Motherboard

EnglishEnglish

English

1.31.3

1.3

TT

T

wo SLIwo SLI

wo SLI

TMTM

TM

Graphics Card Suppor Graphics Card Suppor

Graphics Card Suppor

t Listt List

t List

(for Windows

®

XP / XP 64-bit / Vista

TM

/ Vista

TM

64-bit)

Chipset Model Name Chipset Name Driver

Vendor

NVIDIA

* For the latest updates of the supported PCI Express VGA card list for SLI

TM

Mode,

please visit our website for details.

ASRock website: http://www.asrock.com/support/index.htm

Gigabyte GV-NX88T256H GeForce 8800 GT 182.50

Gigabyte GV-NX88S512H-B GeForce 8800 GTS 182.50

LEADTEK PX8800 GTX TDH GeForce 8800 GTX 182.50

Chaintech GES96GT-A1512P GeForce 9600 GT 182.50

ASUS EN9800GT TDP/HTDP/512M GeForce 9800GT 182.50

LEADTEK PX9800GTX GeForce 9800GTX 182.50

LEADTEK PX9800 GTX+ GeForce 9800GTX+ 182.50

GIGABYTE GV-N26-896H-B GeForce GTX260 182.50

1010

10

ASRock X58 Extreme Motherboard

EnglishEnglish

English

1.41.4

1.4

TT

T

wo CrossFwo CrossF

wo CrossF

ireXireX

ireX

TMTM

TM

Graphics Card Suppor Graphics Card Suppor

Graphics Card Suppor

t Listt List

t List

(for Windows

®

Vista

TM

/ Vista

TM

64-bit)

Chipset Model Name Chipset Name Driver

Vendor

ATI

* For the latest updates of the supported PCI Express VGA card list for

CrossFireX

TM

Mode, please visit our website for details.

ASRock website: http://www.asrock.com/support/index.htm

MSI RX2600PRO-T2D256EZ Radeon HD 2600PRO Catalyst 9.1

Gigabyte GV-RX26T256HP-B Radeon HD 2600XT Catalyst 9.1

Powercolor AX3650 512MMD3-XP RADEON 3650 Catalyst 9.1

Gigabyte GV-RX385256H-B RADEON 3850 Catalyst 9.1

Powercolor AX3870 512MD4-H RADEON 3870 Catalyst 9.1

Powercolor AX3870X2 1GBD3-H RADEON 3870 Catalyst 9.1

Gecube GC-HD485PG3-E3 RADEON 4850 Catalyst 9.1

1.51.5

1.5

Three CrossFireXThree CrossFireX

Three CrossFireX

TMTM

TM

Graphics Card Support List Graphics Card Support List

Graphics Card Support List

(for Windows

®

Vista

TM

/ Vista

TM

64-bit)

Chipset Model Name Chipset Name Driver

Vendor

ATI

* For the latest updates of the supported PCI Express VGA card list for

CrossFireX

TM

Mode, please visit our website for details.

ASRock website: http://www.asrock.com/support/index.htm

Gecube GC-HD485PG3-E3 RADEON 4850 Catalyst 9.1

1111

11

ASRock X58 Extreme Motherboard

2.2.

2.

InstallationInstallation

Installation

Pre-installation PrecautionsPre-installation Precautions

Pre-installation Precautions

Take note of the following precautions before you install mother-

board components or change any motherboard settings.

1. Unplug the power cord from the wall socket before touching any

component. Failure to do so may cause severe damage to the

motherboard, peripherals, and/or components.

2. To avoid damaging the motherboard components due to static

electricity, NEVER place your motherboard directly on the carpet

or the like. Also remember to use a grounded wrist strap or touch

a safety grounded object before you handle components.

3. Hold components by the edges and do not touch the ICs.

4. Whenever you uninstall any component, place it on a grounded

antstatic pad or in the bag that comes with the component.

5. When placing screws into the screw holes to secure the

motherboard to the chassis, please do not over-tighten the

screws! Doing so may damage the motherboard.

2.12.1

2.1

CPU InstallationCPU Installation

CPU Installation

For the installation of Intel 1366-Pin CPU,

please follow the steps below.

Before you insert the 1366-Pin CPU into the socket, please check if

the CPU surface is unclean or if there is any bent pin on the socket.

Do not force to insert the CPU into the socket if above situation is

found. Otherwise, the CPU will be seriously damaged.

EnglishEnglish

English

1366-Pin Socket Overview

00PRO Catalyst 9.1

00XT Catalyst 9.1

Catalyst 9.1

1212

12

ASRock X58 Extreme Motherboard

EnglishEnglish

English

Step 1. Open the socket:

Step 1-1. Disengaging the lever by depressing

down and out on the hook to clear re-

tention tab.

Step 1-2. Rotate the load lever to fully open posi-

tion at approximately 135 degrees.

Step 1-3. Rotate the load plate to fully open posi-

tion at approximately 100 degrees.

Step 2. Remove PnP Cap (Pick and Place Cap).

1. It is recommended to use the cap tab to handle and avoid kicking

off the PnP cap.

2. This cap must be placed if returning the motherboard for after

service.

black line

Pin1

alignment key

Pin1

1366-Pin CPU

1366-Pin Socket

Step 3. Insert the 1366-Pin CPU:

Step 3-1. Hold the CPU by the edges where are

marked with black lines.

Step 3-2. Orient the CPU with IHS (Integrated Heat

Sink) up. Locate Pin1 and the two ori-

entation key notches.

orientation key notch

For proper inserting, please ensure to match the two orientation

key notches of the CPU with the two alignment keys of the

socket.

1313

13

ASRock X58 Extreme Motherboard

EnglishEnglish

English

et

Step 3-3. Carefully place the CPU into the socket

by using a purely vertical motion.

Step 3-4. Verify that the CPU is within the socket

and properly mated to the orient keys.

Step 4. Close the socket:

Step 4-1. Rotate the load plate onto the IHS.

Step 4-2. While pressing down lightly on load

plate, engage the load lever.

Step 4-3. Secure load lever with load plate tab

under retention tab of load lever.

2.22.2

2.2

Installation of CPU Fan and HeatsinkInstallation of CPU Fan and Heatsink

Installation of CPU Fan and Heatsink

For proper installation, please kindly refer to the instruction manuals of your CPU fan and

heatsink.

Below is an example to illustrate the installation of the heatsink for 1366-Pin CPU.

Step 1. Apply thermal interface material onto center of

IHS on the socket surface.

Step 2. Place the heatsink onto the socket. Ensure fan

cables are oriented on side closest to the CPU

fan connector on the motherboard (CPU_FAN1,

see page 2, No. 2).

Step 3. Align fasteners with the motherboard

throughholes.

Step 4. Rotate the fastener clockwise, then press down

on fastener caps with thumb to install and lock.

Repeat with remaining fasteners.

If you press down the fasteners without rotating them clockwise,

the heatsink cannot be secured on the motherboard.

Step 5. Connect fan header with the CPU fan connector

on the motherboard.

Step 6. Secure excess cable with tie-wrap to ensure

cable does not interfere with fan operation or

contact other components.

1414

14

ASRock X58 Extreme Motherboard

EnglishEnglish

English

2.3 Installation of Memor2.3 Installation of Memor

2.3 Installation of Memor

y Modules (DIMM)y Modules (DIMM)

y Modules (DIMM)

This motherboard provides six 240-pin DDR3 (Double Data Rate 3) DIMM slots, and

supports Triple Channel Memory Technology. For triple channel configuration, you

always need to install identical (the same brand, speed, size and chip-type) DDR3

DIMM pair in the slots of the same color. In other words, you have to install identi-

cal DDR3 DIMM pair in Triple Channel (DDR3_A1, DDR3_B1 and DDR3_C1; White

slots; see p.2 No.7), or identical DDR3 DIMM pair in Triple Channel (DDR3_A2,

DDR3_B2 and DDR3_C2; Blue slots; see p.2 No.12), so that Triple Channel

Memory Technology can be activated. This motherboard also allows you to

install six DDR3 DIMMs for triple channel configuration, and please install iden-

tical DDR3 DIMMs in all six slots.

Recommended Memory Configurations

DDR3_A2 DDR3_A1 DDR3_B2 DDR3_B1 DDR3_C2 DDR3_C1

(Blue) (White) (Blue) (White) (Blue) (White)

1 DIMM - Populated - - - -

2 DIMMs - Populated - Populated - -

3 DIMMs - Populated - Populated - Populated

4 DIMMs Populated Populated - Populated - Populated

5 DIMMs Populated Populated Populated Populated - Populated

6 DIMMs Populated Populated Populated Populated Populated Populated

1. Please install the memory module into the white slot (DDR3_A1,

DDR3_B1 or DDR3_C1) for the first priority.

2. Due to Intel

®

CPU spec definition, the system will not boot if only

one DIMM is installed into DDR3_A2, DDR3_B2 or DDR3_C2 slot.

3. Due to Intel

®

CPU spec definition, XMP DIMMs and DDR3 1600 are

supported for one DIMM per channel only.

4. You may install varying memory sizes in Channel A, Channel B and

Channel C. The system maps the total size of the lower-sized

channel for the dual-channel or triple-channel configuration. Any

excess memory from the higher-sized channel is then mapped for

single-channel operation.

5. It is not allowed to install a DDR or DDR2 memory module into

DDR3 slot; otherwise, this motherboard and DIMM may be

damaged.

1515

15

ASRock X58 Extreme Motherboard

EnglishEnglish

English

Installing a DIMMInstalling a DIMM

Installing a DIMM

Please make sure to disconnect power supply before adding or

removing DIMMs or the system components.

Step 1. Unlock a DIMM slot by pressing the retaining clips outward.

Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break

on the slot.

The DIMM only fits in one correct orientation. It will cause permanent

damage to the motherboard and the DIMM if you force the DIMM into the slot

at incorrect orientation.

Step 3. Firmly insert the DIMM into the slot until the retaining clips at both ends fully

snap back in place and the DIMM is properly seated.

1616

16

ASRock X58 Extreme Motherboard

EnglishEnglish

English

2.4 Expansion Slots (PCI and PCI Express Slots)2.4 Expansion Slots (PCI and PCI Express Slots)

2.4 Expansion Slots (PCI and PCI Express Slots)

There are 2 PCI slots and 5 PCI Express slots on this motherboard.

PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI

interface.

PCIE slots:

PCIE1 / PCIE3 (PCIE x1 slot; White) is used for PCI Express cards with

x1 lane width cards, such as Gigabit LAN card, SATA2 card, etc.

PCIE2 / PCIE4 (PCIE x16 slot; Blue) is used for PCI Express x16 lane

width graphics cards, or used to install PCI Express graphics cards to

support CrossFireX

TM

or SLI

TM

function.

PCIE5 (PCIE x16 slot; Orange) is used for PCI Express x1 lane width

cards, such as Gigabit LAN card, SATA2 card, etc., or used to install

PCI Express graphics cards to support 3-Way CrossFireX

TM

function.

1. In single VGA card mode, it is recommended to install a PCI Express

x16 graphics card on PCIE2 slot.

2. In CrossFireX

TM

mode or SLI

TM

mode, please install PCI Express x16

graphics cards on PCIE2 and PCIE4 slots. Therefore, both these two

slots will work at x16 bandwidth.

3. In 3-Way CrossFireX

TM

mode, please install PCI Express x16 graphics

cards on PCIE2, PCIE4 and PCIE5 slots. Therefore, PCIE2 and PCIE4

slots will work at x16 bandwidth while PCIE5 slot will work at x4

bandwidth.

4. Please connect a chassis fan to motherboard chassis fan connector

(CHA_FAN1 or CHA_FAN2) when using multiple graphics cards for

better thermal environment.

Installing an expansion cardInstalling an expansion card

Installing an expansion card

Step 1. Before installing the expansion card, please make sure that the power

supply is switched off or the power cord is unplugged. Please read the

documentation of the expansion card and make necessary hardware

settings for the card before you start the installation.

Step 2. Remove the system unit cover (if your motherboard is already installed in

a chassis).

Step 3. Remove the bracket facing the slot that you intend to use. Keep the

screws for later use.

Step 4. Align the card connector with the slot and press firmly until the card is

completely seated on the slot.

Step 5. Fasten the card to the chassis with screws.

Step 6. Replace the system cover.

1717

17

ASRock X58 Extreme Motherboard

EnglishEnglish

English

2.5 SLI2.5 SLI

2.5 SLI

TMTM

TM

and Quad SLI and Quad SLI

and Quad SLI

TM TM

TM

Operation GuideOperation Guide

Operation Guide

This motherboard supports NVIDIA

®

SLI

TM

and Quad SLI

TM

(Scalable Link Interface)

technology that allows you to install up to two identical PCI Express x16 graphics

cards. Currently, NVIDIA

®

SLI

TM

technology supports Windows

®

XP, XP 64-bit, Vista

TM

and Vista

TM

64-bit OS. NVIDIA

®

Quad SLI

TM

technology support Windows

®

Vista

TM

and Vista

TM

64-bit OS only. Please follow the installation procedures in this section.

Requirements

1. For SLI

TM

or Quad SLI

TM

technology, you should have two identical

SLI

TM

-ready graphics cards that are NVIDIA

®

certified.

2. Make sure that your graphics card driver supports NVIDIA

®

SLI

TM

technology. Download the driver version 181.20 or later from NVIDIA

®

website (www.nvidia.com).

3. Make sure that your power supply unit (PSU) can provide at least the

minimum power required by your system. It is recommended to use

NVIDIA

®

certified PSU. Please refer to NVIDIA

®

website for details.

2.5.1 Graphics Card Setup2.5.1 Graphics Card Setup

2.5.1 Graphics Card Setup

2.5.1.1 Installing T2.5.1.1 Installing T

2.5.1.1 Installing T

wo SLIwo SLI

wo SLI

TMTM

TM

-R-R

-R

eady Graphics Cardseady Graphics Cards

eady Graphics Cards

Step 1. Install the identical SLI

TM

-ready graphics cards that are NVIDIA

®

certified

because different types of graphics cards will not work together properly.

(Even the GPU chips version shall be the same.) Insert one graphics card

into PCIE2 slot and the other graphics card to PCIE4 slot. Make sure that the

cards are properly seated on the slots.

Step2. If required, connect the auxiliary power source to the PCI Express graphics

cards.

1818

18

ASRock X58 Extreme Motherboard

EnglishEnglish

English

Step4. Connect a VGA cable or a DVI cable to the monitor connector or the DVI

connector of the graphics card that is inserted to PCIE2 slot.

Step3. Align and insert ASRock SLI_Bridge_2S Card to the goldfingers on each

graphics card. Make sure ASRock SLI_Bridge_2S Card is firmly in place.

ASRock SLI_Bridge_2S Card

2.5.2 Driver Installation and Setup2.5.2 Driver Installation and Setup

2.5.2 Driver Installation and Setup

Install the graphics card drivers to your system. After that, you can enable the Multi-

Graphics Processing Unit (GPU) feature in the NVIDIA

®

nView system tray utility. Please

follow the below procedures to enable the multi-GPU feature.

For Windows

®

XP / XP 64-bit OS:

(For SLI

TM

mode only)

A. Double-click NVIDIA Settings icon on your Windows

®

taskbar.

B. From the pop-up menu, select Set SLI and PhysX configuration. In

Set PhysX GPU acceleration item, please select Enabled. In Select

an SLI configuration item, please select Enable SLI. And click Apply.

1919

19

ASRock X58 Extreme Motherboard

EnglishEnglish

English

For Windows

®

Vista

TM

/ Vista

TM

64-bit OS:

(For SLI

TM

and Quad SLI

TM

mode)

A. Click the Start icon on your Windows taskbar.

B. From the pop-up menu, select All Programs, and then click NVIDIA

Corporation.

C. Select NVIDIA Control Panel tab.

D. Select Control Panel tab.

E. From the pop-up menu, select Set SLI and PhysX configuration. In Set

PhysX GPU acceleration item, please select Enabled. In Select an SLI

configuration item, please select Enable SLI. And click Apply.

F. Reboot your system.

G. You can freely enjoy the benefit of SLI

TM

or Quad SLI

TM

feature.

C. Reboot your system.

D. You can freely enjoy the benefit of SLI

TM

feature.

2020

20

ASRock X58 Extreme Motherboard

EnglishEnglish

English

1. If a customer incorrectly configures their system they will not see the

performance benefits of CrossFireX

TM

. All three CrossFireX

TM

components, a

CrossFireX

TM

Ready graphics card, a CrossFireX

TM

Ready motherboard and a

CrossFireX

TM

Edition co-processor graphics card, must be installed correctly to

benefit from the CrossFireX

TM

multi-GPU platform.

2. If you pair a 12-pipe CrossFireX

TM

Edition card with a 16-pipe card, both cards

will operate as 12-pipe cards while in CrossFireX

TM

mode.

2.62.6

2.6

CrossFCrossF

CrossF

ireXireX

ireX

TMTM

TM

, 3-, 3-

, 3-

WW

W

ay CrossFay CrossF

ay CrossF

ireXireX

ireX

TMTM

TM

and Quad and Quad

and Quad

CrossFireXCrossFireX

CrossFireX

TMTM

TM

Operation Guide Operation Guide

Operation Guide

This motherboard supports CrossFireX

TM

, 3-Way CrossFireX

TM

and Quad

CrossFireX

TM

feature. CrossFireX

TM

technology offers the most advantageous means

available of combining multiple high performance Graphics Processing Units (GPU) in

a single PC. Combining a range of different operating modes with intelligent software

design and an innovative interconnect mechanism, CrossFireX

TM

enables the highest

possible level of performance and image quality in any 3D application. Currently

CrossFireX

TM

feature is supported with Windows

®

XP with Service Pack 2 and

Vista

TM

OS. 3-Way CrossFireX

TM

and Quad CrossFireX

TM

feature are supported with

Windows

®

Vista

TM

OS only. Please check AMD website for ATI

TM

CrossFireX

TM

driver

updates.

2.6.1 Graphics Card Setup2.6.1 Graphics Card Setup

2.6.1 Graphics Card Setup

2.6.1.1 Installing T2.6.1.1 Installing T

2.6.1.1 Installing T

wo CrossFwo CrossF

wo CrossF

ireXireX

ireX

TMTM

TM

-R-R

-R

eady Graphicseady Graphics

eady Graphics

Cards Cards

Cards

Different CrossFireX

TM

cards may require different methods to enable CrossFireX

TM

feature. In below procedures, we use Radeon HD 3870 as the example graphics card.

For other CrossFireX

TM

cards that ATI

TM

has released or will release in the future, please

refer to ATI

TM

graphics card manuals for detailed installation guide.

Step 1. Insert one Radeon graphics card into PCIE2 slot and the other Radeon

graphics card to PCIE4 slot. Make sure that the cards are properly seated

on the slots.

La pagina si sta caricando...

ASROCK X58 EXTREME - Guida d'installazione

ASROCK X58 EXTREME - Guida d'installazione

in altre lingue

Documenti correlati

Altri documenti