VDO MR6000 Owner's Manual And Mounting Instructions

MR 6000

Owner’s manual and mounting instruction

Mode d’emploi et manuel d’installation

Bedienungs- und Einbauanleitung

Gebruiksaanwijzing en inbouwhandleiding

Istruzioni d’uso e d’installazione

Instrucciones de manejo y de montaje

Bruksanvisning och monteringsanvisning

Betjeningsvejledning og monteringsanvisning

Owner’s manual and mounting instruction

Mode d’emploi et manuel d’installation

Bedienungs- und Einbauanleitung

Gebruiksaanwijzing en inbouwhandleiding

Istruzioni d’uso e d’installazione

Instrucciones de manejo y de montaje

Bruksanvisning och monteringsanvisning

Betjeningsvejledning og monteringsanvisning

Owner’s manual and mounting instruction

Mode d’emploi et manuel d’installation

Bedienungs- und Einbauanleitung

Gebruiksaanwijzing en inbouwhandleiding

Istruzioni d’uso e d’installazione

Instrucciones de manejo y de montaje

Bruksanvisning och monteringsanvisning

Betjeningsvejledning og monteringsanvisning

MR 6000 12/99 ri

English

Français

Deutsch

Nederlands

ItalianoEspañol

Svenska

Dansk

0

5

25

75

95

100

0

5

25

75

95

100

0

5

25

75

95

100

0

5

25

75

95

100

2

Attention!

Only use this system when it is safe to do so. It is more important to keep your eyes on

the road and your hands on the wheel.

Due to constantly changing traffic conditions, we unfortunately cannot guarantee 100 %

precision under all circumstances.

Attention !

N’utilisez le système que si vous ne mettez pas en danger votre vie ou celle des autres

usagers de la route. Il est plus important de surveiller le trafic routier et d’avoir les mains

sur le volant que de lire les informations apparaissant sur l’écran.

Étant donné que le sens de circulation a pu être changé entre temps, nous ne pouvons

pas vous garantir une exactitude à 100 % des indications données.

Achtung!

Benutzen Sie das System nur, wenn die Sicherheit es zuläßt. Es ist wichtiger, auf den

Verkehr zu achten und die Hände am Lenkrad zu lassen.

Aufgrund sich ständig ändernder Verkehrsführungen kann leider keine 100 %ige

Genauigkeit unter allen Umständen gewährleistet werden.

Belangrijk!

Gebruik het systeem uitsluitend, als de veiligheid het toelaat. Het is belangrijker om op

het verkeer te letten en de handen aan het stuur te houden.

Op grond van voortdurend veranderende verkeerssituaties kan helaas geen 100 %

nauwkeurigheid onder alle omstandigheden worden gegarandeerd.

Attenzione!

Usare questo sistema solo se il traffico lo ammette. E´ importante tenere d´occhio la

strada e le mani sul volante.

¡Atención!

Utilice el sistema sólo si lo permite el nivel de seguridad. Es más importante atender al

tráfico y mantener las manos en el volante.

Debido a que las rutas cambian constantemente, lamentamos no poder garantizar un

100 % de exactitud en cualquier ocasión.

Observera!

Använd systemet bara när säkerheten tillåter. Det är viktigare att iaktta vad som händer i

trafiken och hålla händerna på ratten.

På grund av den ständigt förändrade trafiksituationen kan ingen garanti för 100%:ig

noggrannhet under alla omständigheter lämnas.

Vigtigt!

Brug systemet kun, når De ikke bringer andre eller sig selv i fare. Vær opmærksom på

trafikken, og hold hænderne på rattet.

Pga. løbende ændringer i vejnettet kan der ikke opnås 100% overensstemmelse

mellem det digitale vejkort og den aktuelle trafiksituation.

3

4

5

Operating instructions Page 7

Illustrations Page 3

Installation Instruction Page 39

Guarantee and service Page 343

Mode d’emploi Page 49

Illustrations Page 3

Instructions de montage Page 81

Garantie et service après-vente Page 343

Bedienungsanleitung Seite 91

Abbildungen Seite 3

Einbauanleitung Seite 123

Garantieleistung und Service Seite 343

Gebruiksaanwijzing Pagina 133

Afbeeldingen Pagina 3

Inbouwaanwijzing Pagina 165

Garantie en service Pagina 343

Istruzioni d’uso Pagina 175

Figure Pagina 3

Instruzioni per il montaggio Pagina 207

Garanzia e servizio Pagina 343

Instrucciones de manejo Página 217

Ilustraciones Página 3

Manual de instalación Página 249

Garantía y servicio técnico Página 343

Bruksanvisning Sidan 259

Bilder Sidan 3

Monteringsanvisning Sidan 291

Garantiåtaganden och service Sidan 343

Betjeningsvejledning Side 301

Illustrationer Side 3

Monteringsvejledning Side 333

Garanti og service Side 343

SvenskaDansk Español Italiano Nederlands Deutsch Français Englisch

6

7

English

Contents

1. PRECAUTIONS..................................................... 9

WARNING .............................................................. 9

USER INFORMATION ............................................. 9

2. DESIGNATION ................................................... 10

Button designation .............................................. 10

JOYSTICK operation ............................................. 11

3. OPERATING MODE DISPLAY .......................... 12

Joint display of all operating modes ................... 12

RADIO mode display ............................................ 12

RDS mode display ................................................ 13

CD changer mode display ..................................... 13

TV mode display ................................................... 14

4. REMOVABLE OPERATING PANEL ................... 15

Removing the operating panel ............................. 15

Installing the operating panel .............................. 15

5. HANDLING PRECAUTIONS .............................. 16

LCD screen / general ............................................ 16

Cleaning ............................................................... 16

6. OPERATION ........................................................ 17

Basic operation ................................................ 17

Switching on / off ........................................... 17

Selecting operating mode .............................. 17

Adjusting volume ........................................... 17

Switching the display mode ........................... 17

Mode display .................................................. 18

Opening and rotating the display .................. 18

Switching the monitor on / off ....................... 18

Mute function................................................. 18

Sound processor ............................................. 19

Sound programming ...................................... 19

Adjusting bass and treble .............................. 20

Adjusting balance and fader .......................... 20

Loudness ........................................................ 20

CT function (time) .......................................... 20

Dear customer,

Thank you for choosing a VDO Dayton MR 6000. These operating instructions should be read

carefully to enable the utilisation of the diverse MR 6000 functions. After reading, the instruc-

tions should kept close at hand (e.g. in the glove compartment).

The functions of the components TV 6000 (TV tuner) and MW 6000 (6 compartment CD chan-

ger) which are available as accessories, are described in these operating instructions. Informa-

tion on installation and connection can be found in the installation instructions for these

components.

Operation of the optional navigation system is described in the operating and installation

instructions for navigation computer.

Radio operation .............................................. 21

Listening to radio .......................................... 21

Tuning ............................................................ 21

Automatic search........................................... 21

Manual tuning ............................................... 21

Recalling a preset .......................................... 22

Manual storage ............................................. 22

Automatic storage ......................................... 22

Preset scan..................................................... 22

RDS operation.................................................. 23

RDS (Radio Data System) .............................. 23

AF function .................................................... 23

REG function (regional programme) ............. 23

Manual tuning of a

regional programme in the same

station network ....................................... 23

TA function (traffic announcement) .............. 24

Automatic storage function for

TP station ................................................. 24

PTY ................................................................. 24

PTY tuning ..................................................... 24

PTY search ..................................................... 25

PTY preset memory ....................................... 25

Programme type selection mode for

extended unit........................................... 26

Emergency announcement ............................ 26

Changing the PTY display language ................ 26

Volume adjusting for TA, emergency

announcement (ALARM) and PTY ............. 26

CD changer operation .................................... 27

CD changer functions ..................................... 27

Play pause ...................................................... 27

Display of CD titles ......................................... 27

Selecting a CD ................................................ 27

Title selection ................................................. 27

Fast forward / rewind ..................................... 28

TOP function ................................................... 28

Scan play – SCN ............................................. 28

CD scan play – S-SCN..................................... 28

Repeat – RPT .................................................. 28

CD repeat – D-RPT ......................................... 28

Random play – RDM ...................................... 28

CD random play – D-RDM .............................. 28

8

Television operation ................................... 29

Television functions ....................................... 29

Television ....................................................... 29

Video play ...................................................... 29

Tuning ............................................................ 29

Automatic search........................................... 29

Manual tuning ............................................... 29

Recalling a preset .......................................... 30

Manual storage ............................................. 30

Automatic storage – AS ................................ 30

Preset scan – SCAN ....................................... 30

Switching the video system

between NTSC and PAL ........................... 30

Entering the TV receiver range ...................... 30

Entering the TV diversity ............................... 31

Adjusting brightness, colour and hue .............. 31

Switching the TV picture format ..................... 31

Navigation system & reversing camera..... 32

Setting the unit to navigation system ............ 32

Switching between navigation

and audio / video display ......................... 32

Using the navigation system .......................... 32

Reverse monitoring via reversing camera ...... 32

Setting the unit to reversing camera .............. 32

Other functions ................................................ 33

Continuous button illumination ..................... 33

Entering titles ................................................. 33

Display of title list .......................................... 33

Setting for mobile radio interruption ............. 34

Setting the vehicle loudspeaker

output for the mobile telephone .............. 34

7. FAULT FINDING ................................................ 35

8. FAULT DISPLAYS .............................................. 37

9. TECHNICAL DATA ............................................ 38

Contents

9

English

1. PRECAUTIONS

1. If it is very cold in the vehicle and the CD

player is operated immediately after switch-

ing on the heater, the formation of conden-

sation on the CD or on the optical compo-

nents of the CD player is possible, which may

prevent correct playing of the CD. If conden-

sation has formed on the CD, it should be

removed using a soft cloth. If condensation

has formed on the optical components, do

not use the CD player for approximately one

hour. The condensation evaporates during

this time and normal operation is then possi-

ble.

2. Strong vibration can be caused by driving on

bad road surfaces, which may cause individual

points on the CD to be jumped over.

3. This unit is equipped with a precision mecha-

nism. In the event of a fault, never open the

housing, disassemble the unit or lubricate the

rotating components.

For safety reasons, the driver should not watch television or operate the controls whilst driving.

Please note that it is illegal in certain countries to watch or operate the television whilst

driving.

The volume should be set so that outside noises (e.g. emergency vehicles) remain audible.

4. Television reception

When receiving television stations, the sig-

nal strength varies due to the movement of

the vehicle. It is therefore possible that, in

certain cases, no clear pictures are received.

• Television signals are propagated “quasi-

optically”. Reception can thus be impaired

by buildings, hills or other obstacles.

• External factors such as power lines for elec-

tric trains, high voltage lines and signalling

devices can interfere with the picture or

cause noise.

∗ If the reception is bad, a station with good

reception should be selected.

USER INFORMATION:.

CHANGES OR MODIFICATIONS, WHICH ARE NOT

APPROVED BY THE MANUFACTURER OF THIS

PRODUCT WILL INVALIDATE THE WARRANTY.

WARNING

10

2. DESIGNATION

Note:

• Please refer to the illustration on page 3 (fold out) when reading this section.

11

1 p / FUNC (switch on / off / function)

button

22

2 VOL

8/28/2

8/2 (volume) and

SEARCH

44/6644/66

44/66 buttons

33

3

66

6II (play / pause) button

4 Display

5 AS / SCN (Auto Store / scan function)

button

6 Release button for removable operating

panel

7 AF / RPT (alternative frequency / repeat)

button

8 PTY / RDM (programme type / random

play) button

9 SOUND (sound processor) button

0 INFO / TA (traffic announcement) button

a OPEN (extend LCD display) button

b DISP (switch display mode)

c Preset buttons (1 to 6)

d MUTE (mute function) button

e BAND (waveband) button

f LCD colour display

g AUDIO (audio mode) button

h ADJ (adjust) button

i TITLE (title) button

j WIDE (screen mode) button

k JOYSTICK (multifunction control)

l Infrared sensor

Retracted display Extended display

Button designation

11

English

JOYSTICK operation

Note:

• Many settings are performed via JOYSTICK k. Therefore, it is essential that this section is read to

understand its operation.

● ●

● Selection of menu items

To select, i.e. mark menu items, press the

JOYSTICK k upwards or downwards.

●●

● Settings for selected menu items

Settings for a menu item can be performed

after it has been marked. For this purpose,

press the JOYSTICK to the right or left. Press

the button in the centre of the JOYSTICK to

enter the setting.

●●

● If ”Push NEXT” appears on the display:

1. Press the button in the centre of the JOY-

STICK to select the menu item and to call

up its settings on the display.

2. Press the JOYSTICK upwards or downwards

to mark the desired settings. Then press the

button in the centre of the JOYSTICK to

enter the setting.

●●

● Return to previous operating mode

Press the JOYSTICK to the right or left to se-

lect ”MENU” and then press the button in the

centre of the JOYSTICK.

Up

Left

Right

Down

Enter button in

centre of JOYSTICK

12

RADIO mode display

LCD COLOUR SCREEN FRONT DISPLAY

SUB-mode

Preset no.

Waveband / frequency / preset

no.

Waveband

Frequency

Stereo indicator

Automatic tuning / manual tuning

indicator

:Automatic tuning / manual tuning

indicator

PTY-name

3. OPERATING MODE DISPLAY

The LCD screen and the front display of the MR 6000 utilise the following symbols etc. to indicate

operating mode and selected functions.

Joint display of all operating modes

LCD COLOUR SCREEN FRONT DISPLAY

Time mode

MAIN-mode

Operating mode

Button function name

CT (time)

Type of PTY interruption

Sound indicator

Loudness indicator

Sound indicator

Loudness indicator

Mute function indicator

Function indicator

CT (time)

Hour

Minute

MAIN-mode

13

English

RDS mode display

LCD COLOUR SCREEN FRONT DISPLAY

Waveband / station name (abbreviation) for

reception of station code / preset no.

Received PTY name

Type of PTY interruption

: AF indicator (alternative frequency)

: REG indicator (regional station)

: TA indicator (traffic announcement)

: TP indicator (traffic programme)

: PTY indicator (programme type)

MAIN mode

SUB mode

: Automatic tuning / manual tuning

indicator

PTY-name

Station name

: Stereo indicator

CD changer mode display

LCD COLOUR SCREEN FRONT DISPLAY

Title name / CD names / user

names

CD number

Playback time

MAIN mode

Title number

In play mode the display shows the following:

•T-SCAN : Title scan function

•T-REPEAT, RPT : Title repeat

•T-RANDOM, RDM : Random play

•D-SCAN : CD scan function

•D-REPEAT, D-RPT : CD repeat

•D-RANDOM, D-RDM : CD random play

Title name

CD name

: CD repeat indicator

: CD random play indicator

Repeat indicator

Random play indicator

CD number indicator

Playback time

Title number

SUB mode

14

TV mode display

LCD COLOUR SCREEN FRONT DISPLAY

MAIN mode

SUB mode

User name

Screen mode indicator

User name

Waveband / channel / preset no.

Waveband

Channel

Preset no.

: Automatic tuning / manual tuning

indicator

15

English

4.

REMOVABLE OPERATING PANEL

2. Engage the operating panel at the top in the

middle until a click is audible.

3. Switch on the unit via FUNC button 1.

CAUTION

• The operating panel can be easily dam-

aged by impacts. Therefore, after re-

moval ensure that it is not dropped or

exposed to heavy impacts.

• When the operating panel is folded

down, it could fall out as a result of

vehicle vibration. This could cause dam-

age to the operating panel. Therefore,

close the operating panel or keep it in

the protective case.

• The connection between main unit and

operating panel is an extremely impor-

tant component. Ensure that it is not

damaged by the pressure effects of fin-

ger nails, screwdrivers, etc.

Note:

• If the operating panel is dirty, it should be wiped

clean using a soft, dry cloth.

The operating panel can be removed as pro-

tection against theft. The operating panel

should be kept in the protective case after

removal to prevent damage. We recommend

that you take the operating panel with you

when leaving your vehicle.

Removing the operating panel

1. Switch off the unit.

2. Press the release button 6 to the right to

release the operating panel.

3. Pull the operating panel towards you and

remove.

Installing the operating panel

1. Hold the operating panel so that the back is

facing towards the main unit and then posi-

tion the bottom edge of the operating pa-

nel against the corresponding edge of the

main unit, as shown in the illustration be-

low.

Operating panel

FUNC button

Release button

16

5. HANDLING PRECAUTIONS

LCD screen / general

• If the vehicle is parked in the open for long

periods, the LCD screen should be stored in

the main unit.

The LCD screen should be operated within a

temperature range of 0 to 60 °C.

• Ensure that no liquids from drinks, umbrel-

las etc. come into contact with the unit. These

could damage the internal circuits.

• The unit must not be disassembled or modi-

fied in any way. This could cause damage.

• Do not pull out the LCD screen and use as a

storage area. The LCD screen must also not

be exposed to impacts, as this can cause

breakages, deformation or other forms of

damage.

• Ensure that the screen cannot be burned by

cigarettes. This could damage or deform the

housing.

• If a fault occurs, the unit should be exam-

ined by the dealer who supplied it.

• When the screen is in the inclined position,

do not insert any objects into the gap be-

tween the LCD screen and the main unit or

reach into the gap.

• When the screen is in the inclined position,

do not place any objects on the display.

• Under extremely cold conditions, the move-

ment of the screen may be slow or the screen

may be dark. These are however not faults.

These effects are eliminated when the tem-

perature increases.

• Small black and shiny points on the LCD

screen are inherent to LCD products.

• The LCD screen may switch off temporarily

during opening or closing, when the motor

is switched off or if it is cold. This is however

not a fault. If this occurs, repeat the opera-

tion.

Cleaning

• Cleaning the housing

Carefully wipe off the dirt using a soft, dry

cloth.

If the unit is extremely dirty, carefully wipe

off the dirt using a soft cloth soaked in a

neutral cleaning agent which has been di-

luted with water. Then wipe over using a dry

cloth.

Never use benzene, thinners, vehicle cleaner

etc., as these substances can damage the

housing or cause the paint to flake. Staining

may also be caused if the housing is in contact

with rubber or plastic products over a long

time period.

• Cleaning the LCD screen

Dust accumulates on the LCD screen and it

should therefore be wiped regularly with a

soft cloth.

The screen surface is susceptible to scratch-

ing and contact with hard objects should

therefore be avoided.

The following precautionary measures should be observed in order to prolong the service life:

17

English

Basic operation

Note:

• Switch on the unit when the engine is running.

• Do not use the unit for long time periods with

the engine switched off. It may no longer be

possible to start the engine if the battery has

been overloaded. The service life of the battery

will also be shortened.

Switching on / off

1. Switch on the unit via FUNC button 1.

2. The illumination and the display of the unit

are activated. The unit automatically stores

the last operating mode to be set and auto-

matically sets this operating mode on the

display.

3. Press and hold the FUNC button for at least 1

second to switch off the unit.

Note:

• System check

After installation and completion of all wiring

connections, an automatic system check is per-

formed before the system can be operated for

the first time. After connection to the vehicle

power supply, the displays ”SYSTEM” and

”PUSH PWR” appear alternately on the moni-

tor.

Press the FUNC button

1

.

The system now performs a system check. As soon

as ”COMPLETE” appears, press the FUNC button

again.

Selecting operating mode

1. Press the FUNC button 1 to change the op-

erating mode.

2. Each time the FUNC button is pressed, the

operating mode is changed in the following

sequence:

Radio operation –> CD changer –> Televi-

sion operation –> Radio operation ...

Adjusting volume

Move the VOL button 2 in the direction of

the arrow

88

8 (upwards) or

22

2 (downwards) to

adjust the volume.

88

8: Increases the volume

22

2: Decreases the volume

∗ The volume level shown on the display covers a range from

0 (minimum) to 33 (maximum).

CAUTION

The volume should be set so that outside

noises (e.g. emergency vehicles) remain audi-

ble.

Switching the display mode

Retracted unit:

Actuate the DISP button b to set the desired

display mode. Each time the DISP button is

actuated, the display mode is changed in the

following sequence:

Note: Please refer to the diagrams on page 3 (fold out) when rea-

ding this section.

MAIN mode

SUB mode

Time mode (CT)

MAIN mode

Note:

• Once the desired display mode is set, this be-

comes the standard mode. When a function

setting is performed, e.g. for volume, the unit

switches temporarily to the mode for the func-

tion. The unit switches back to the desired mode

a few seconds after setting.

6. OPERATION

18

Basic operation

• If a name has been entered, this appears in SUB

mode. If no name has been entered, the dis-

play shows ”----------”. The procedure for enter-

ing data is explained under ”Entering titles”

in the section ”Other functions”.

• Special characters in CD and TV names or sta-

tion abbreviations in RDS are not shown on the

front display. In this case, the corresponding

positions remain empty.

• If no RDS time data is received, ”CT --:--” ap-

pears on the display.

Mode display

Extended unit:

Press the TITLE button i to recall the title

list. Station designations, etc. can be found in

the title list stored under preset buttons c 1

to 6.

∗ The programme names of the presets are displayed in RDS

operating mode.

∗ For further information see ”Display of title list”.

Opening and rotating the dis-

play

Note:

• Do not place any objects on the open display.

• Do not allow any objects to fall onto the mov-

ing part.

• The display must not be exposed to impacts.

1. Press the OPEN button a to extend the LCD

colour f display.

∗ The LCD colour display is retracted again if left in the

horizontal position for at least 10 seconds.

2. Fold the LCD colour display upwards and set

to the optimal viewing angle.

The display is activated as soon as the LCD

colour display is in the vertical position. Si-

multaneously, the display 4 on the unit front

is switched off.

CAUTION

Only rotate the display when it is fully open.

When setting the display angle, ensure that

you do not trap your fingers in the operating

panel or in the instrument panel of the vehicle.

3. Turn the unit horizontally to the detent posi-

tion to retract the LCD colour display.

Switching the monitor on / off

Each time the DISP button b is actuated, the

monitor is switched on or off.

∗ If a button is pressed during operational readiness, the screen

is switched on.

Mute function

The loudspeakers are alternately switched be-

tween mute and on by pressing the MUTE but-

ton d.

If mute function is active, ”MUTE” appears on

the display.

19

English

Sound processor

The unit is equipped with a sound processor

with 3 pre-programmed tone types (sounds).

Set the sound as desired.

* The initial factory setting is ”Z-EHCR OFF”.

If a tone type is selected (1-3), ”Z-EHCR” illu-

minates on the display.

•”Z-EHCR 1” (tone type 1):

Setting for increasing bass.

•”Z-EHCR 2” (tone type 2):

Setting for increasing treble.

•”Z-EHCR 3” (tone type 3):

Setting for increasing bass and

treble.

•”Z-EHCR OFF” (sound processor off):

Neither bass nor treble are in-

creased via the Z enhancer.

Retracted unit:

Each time the SOUND button 9 is actuated,

the tone type is changed in the following se-

quence:

”Z-EHCR 1” –> ”Z-EHCR 2” –> ”Z-EHCR 3” –>

”Z-EHCR OFF” –> ”Z-EHCR 1”...

Extended LCD screen:

1. Press the AUDIO button g to switch to AU-

DIO operating mode.

2. Press the JOYSTICK k upwards or down-

wards and select ”Z-EHCR”. Press the enter

button in the centre of the JOYSTICK to re-

call the sound processor menu.

3. Press the JOYSTICK upwards or downwards

to select between the following tone types.

”TYPE 1” (tone type 1)

”TYPE 2” (tone type 2)

”TYPE 3” (tone type 3)

”OFF” (sound processor off),

and then press the enter button in the

centre of the JOYSTICK to select the rel-

evant tone type.

4. After setting, press the JOYSTICK to the right

or left to recall ”MENU”. Subsequently, press

the enter button in the centre of the JOY-

STICK to switch to AUDIO operating mode.

∗

Press the AUDIO button

g

to switch from

AUDIO oper-

ating mode

to STANDARD display.

Sound programming

Note:

• This function is only available with the unit ex-

tended.

1. Press the AUDIO button g to switch to AU-

DIO operating mode.

2. Press the JOYSTICK k upwards or down-

wards to select ”Z-EH LVL”. Press the enter

button in the centre of the JOYSTICK to re-

call the sound processor menu.

3. Press the JOYSTICK upwards or downwards

to select the level ”Z-EN LVL” for the tone

type.

* If tone type 1 is set, the bass can be set within a range

of ±2.

* If tone type 2 is set, the treble can be set within a range

of ±2.

* If tone type 3 is set, the bass and treble can be set within

a range of ±2.

4. After setting, press the JOYSTICK to the right

or left to access ”MENU”. Subsequently,

press the enter button in the centre of the

JOYSTICK to switch to AUDIO operating

mode.

Basic operation

20

Basic operation

Adjusting bass and treble

Note:

• This function is only available with the unit

extended.

• This function is only available when the sound

processor is switched off (“Z-EHCR off”).

1. Press the AUDIO button g to switch to AU-

DIO operating mode.

2. Press the JOYSTICK k upwards or down-

wards to select ”BAS/TRE”. Press the enter

button in the centre of the JOYSTICK to re-

call the setting menu BASS/TREBLE.

3. Press the JOYSTICK to the right or left to re-

call either the bass (”BASS”) or treble (”TRE-

BLE”) level.

4. Press the JOYSTICK upwards or downwards

to set the level (setting level: -6 to 6).

5. After setting, press the JOYSTICK to the right

or left to access ”MENU”. Subsequently, press

the enter button in the centre of the JOY-

STICK to switch to AUDIO operating mode.

Adjusting balance and fader

Note:

• This function is only available with the unit ex-

tended.

1. Press the AUDIO button g to switch to AU-

DIO operating mode.

2. Press the JOYSTICK k upwards or down-

wards to select ”BAL/FAD”. Press the enter

button in the centre of the JOYSTICK to re-

call the setting menu BAL/FAD.

3. Press the JOYSTICK to the right or left to set

either the balance of volume between the

right and left level channels (”BALANCE”)

or between front and rear channels

(”FADER”).

4. Press the JOYSTICK upwards or downwards

to accept the setting.

Setting range for balance: L13 to R13

Setting range for fader: Front 12 / Rear 12

5. After setting, press the JOYSTICK to the right

or left to access ”MENU”. Subsequently,

press the enter button in the centre of the

JOYSTICK to switch to AUDIO operating

mode.

Loudness

The loudness function increases treble and

bass in order to create a natural tone. Loud-

ness should be switched on when listening to

music at low volume.

• This function is only available with the unit

extended.

1. Press the AUDIO button g for at least 1 sec-

ond to activate the loudness function. ”LD”

illuminates on the display.

2. Press the AUDIO button again for at least

1 second to switch off the loudness function.

”LD” extinguishes on the display.

CT function (time)

The CT function receives CT data from an RDS

station and the time is displayed. Actuate the

DISP button b in order to set the CT display.

* If no CT data is received, ”CT --:--” appears on the display.

Note:

• CT data is not transmitted in certain countries

and by certain stations. CT data cannot be cor-

rectly displayed in certain regions.

La pagina sta caricando ...

VDO MR6000 Owner's Manual And Mounting Instructions

VDO MR6000 Owner's Manual And Mounting Instructions

in altre lingue

Documenti correlati

Altri documenti