Monarch 9403 Operator's Handbook Manual

Monarch



9403



Printer

Each product and program carries a respective written warranty, the only

warranty on which the customer can rely. Monarch reserves the right to make

changes in the product, the programs, and their availability at any time and

without notice. Although Monarch has made every effort to provide complete

and accurate information in this manual, Monarch shall not be liable for any

omissions or inaccuracies. Any update will be incorporated in a later edition of

this manual.

publication may be reproduced, transmitted, stored in a retrieval system, or

translated into any language in any form by any means, without the prior

written permission of Monarch Marking Systems, Inc.

WARNING

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the user will be required to correct

the interference at his own expense.

CANADIAN D.O.C. WARNING

This digital apparatus does not exceed the Class A limits for radio noise emissions from

digital apparatus set out in the Radio Interference Regulations of the Canadian Department

of Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites

applicables aux appareils numériques de la classe A prescrites dans le Réglement sur le

brouillage radioélectrique édicte par le ministère des Communications du Canada.

Trademarks

Monarch is a registered trademark of Monarch Marking Systems, Inc.

9403, 9800, 9820, and 9830 are trademarks of Monarch Marking Systems, Inc.

TrueType is a trademark of Apple Computer, Inc.

Hewlett-Packard is a registered trademark of Hewlett-Packard Company.

Adobe and Acrobat are trademarks of Adobe Systems Incorporated which may be registered in certain

jurisdictions.

Microsoft and MS-DOS are registered trademarks of Microsoft Corporation.

Windows is a registered trademark of Microsoft in the U.S and other countries.

Monarch Marking Systems, Inc. Technical Support in Switzerland: Gomaro s.a. - 1123 Aclens

P.O. Box 608 http://www.gomaro.ch

Dayton, Ohio 45401 e-mail: [email protected] Tel.: 021 869 97 70

STATEMENT OF WARRANTY ON MONARCH MACHINES

Limited Warranty

THIS LIMITED WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER

WARRANTIES OR REPRESENTATIONS EXPRESSED OR IMPLIED,

INCLUDING MERCHANTABILITY OR FITNESS FOR BUYER’S PURPOSES.

THERE IS NO WARRANTY WHICH EXTENDS BEYOND THE LIMITED

WARRANTY.

The Monarch product covered by this limited warranty is warranted to be free

from defects in materials and workmanship for a period of one (1) year from the

date of shipment to the original purchaser. The limited warranty on the

printhead is one million inches.

Monarch further warrants the satisfactory operation of the Monarch product

during the warranty period, unless the product is damaged by accident, abuse

or violence, or the original purchaser uses other than the standard supplies

furnished by or meeting the specification of Monarch, or the Monarch product is

operated or maintained contrary to the instructions provided by Monarch. This

warranty is void if the machine is altered or repaired by other than Monarch

representatives.

This warranty does not include the furnishing of ribbons, ink rollers, tags,

labels, or other supplies.

The Monarch product requiring warranty service may be shipped to the nearest

authorized Monarch service facility with the transportation charges PREPAID.

Monarch is NOT responsible for damage that occurs during shipment if the

product is not shipped in the original Monarch packaging. The Monarch

product will be repaired free of charge during the warranty period.

This warranty is valid only in the United States.

TABLE OF CONTENTS

GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Standard Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Audience. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Ordering Programmer’s Manuals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Unpacking the Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Connecting the Power Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Establishing Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Connecting the Communication Cable . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Default Serial Port Communication Values . . . . . . . . . . . . . . . . . . . . . 1-4

About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

Menu Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

Using the Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

Control Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

Startup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7

Selecting a Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8

Exiting an Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8

Setting Up the Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9

LOADING SUPPLIES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Supply Loading Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Loading Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Printing a Test Label. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

LOADING RIBBON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Loading a Ribbon Roll . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

i

SETTING SUPPLY OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Ribbon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Batch Separators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

Print Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

Supply Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Margin Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

Supply Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8

COMMUNICATION VALUES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

Baud Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Word Length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Stop Bits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Parity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Flow Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4

Reset to Default Values. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4

SETTING CONTRAST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

SETTING DEFAULTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1

Monetary Sign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3

Secondary Sign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4

Decimal Places . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5

Slashed Zero . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5

Power-Up Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6

Prompt Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-7

PRINTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1

Interrupting a Batch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2

Restarting a Batch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3

Canceling a Paused Batch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4

Repeating a Batch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6

ii

Offline Printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-7

Entering Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-8

Entering Letters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-8

Entering Symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9

Using Bar Code 128. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10

Entering and Changing Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10

Types of Data Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-11

Entering a Batch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-13

Using the Standard Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-15

CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1

Cleaning the Printhead and Platen Roller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2

DIAGNOSTICS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1

Factory Set Password. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1

Checking the Software Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-2

Printing a Test Pattern. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-3

Printing a Test Label. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-4

Checking Sensor Mark Quality. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-5

Service Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-6

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

iii

CHARACTER SETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1

Character Sets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1

Uppercase Letters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3

Lowercase Letters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-4

Currency Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-5

Punctuation and Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-6

International Characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-6

Code 128 Function Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-8

iv

GETTING STARTED 1

The Monarch

®

9403 printer prints text, graphics, and bar codes on thermal

transfer (ribbon) or thermal direct supplies. The 9403 printer prints labels

continuously (in one strip).

This chapter includes information about

u

unpacking the printer.

u

connecting the power cable.

u

connecting the communications cable.

u

using the printer’s control panel.

Standard Features

The following features are standard on the 9403 printer:

u

203 dots per inch (DPI) printhead

u

2-inch by 6-inch print image

u

21-key keypad

u

2 inches per second maximum print speed

u

baud rate up to 19200

u

formats, graphics, and check digits saved in Flash memory when printer is turned off

(version 2.0 or greater)

Getting Started 1-1

Audience

The Operator’s Handbook is for the person who prints and applies labels.

Ordering Programmer’s Manuals

An online version of the Packet Reference Manual describes how to create a

format and batch packets for printing labels, how to diagnose printer error

messages, and how to perform other advanced techniques. It is included with

the MONARCH

®

quick-set software where you can print this manual, or you can

order a hard-copy version (part number TC9800PM). e-mail to [email protected]

Unpacking the Printer

After you unpack the printer, you should have

u

9403 printer

u

power cord

u

Operator’s Handbook

u

MONARCH quick-set software.

Keep the box and packaging material in case the printer

ever needs repair.

1-2 Getting Started

Connecting the Power Cable

To connect the power cable:

CAUTION

The power switch must be off while you connect any cables to

the printer.

The scanner port is not active.

1. Plug the power cable into the socket. Plug the other end of the cable into a

grounded electrical outlet.

2. Turn on the printer. Press (I) to turn on and (O) to turn off the printer.

Power

Switch

Communication

Port

Scanner

Port

Getting Started 1-3

Establishing Communications

Before the printer can accept print jobs from the host, you must

u

connect the communication cable to the printer and to the host.

u

set the communication values on the printer to match those at the host.

Connecting the Communication Cable

Make sure the printer is off before connecting the cable

to the communication port.

Serial Communication

9 to 25 pin cable (#110451)

9 to 9 pin cable (#112073)

Connect the communication cable into the bottom port on the printer and the

appropriate port of the host.

Default Serial Port Communication Values

If you are communicating with the host through the serial port, make sure the

printer’s communication values match those at the host. The factory default

values are:

u

Baud 9600

u

Word Length 8 bit

u

Stop Bits 1 stop bit

u

Parity none

u

Flow Control DTR

To change the printer’s communication values, see Chapter 5, "Communication

Values," or your System Administrator.

1-4 Getting Started

About This Manual

This manual explains how to

u

load supplies and ribbons.

u

set up and begin using the printer.

u

select menu options.

u

enter data.

u

print supplies online or offline.

u

perform general maintenance procedures.

Menu Charts

Each chapter of this manual has one or more charts showing the printer’s menu

structure. For example:

u

Normal border boxes show the menu options.

u

Heavy border boxes show the selections to get to the functions.

u

Black background boxes show the functions.

The black boxes show where you are; the bordered boxes show how you got

there.

SUPPLY CONTRAST DEFAULTS

PORT

SETTINGS

MAIN MENU

CANCEL

ALL

PRINT

MODE

REPEAT

BATCH

SETUP DIAG.

BATCH

ENTRY

Getting Started 1-5

Using the Keypad

You can control printer operation and enter data offline using the keypad.

The printer has 21 keys allowing offline data entry. This keypad includes 7

function keys, 10 numeric keys, and 4 symbol keys.

Control Keys

P Interrupts printing.

Enters an international character for printing when you

enter P plus a three-digit code. See Appendix B

for more information.

e Returns the display to the next higher menu, when you

press e

once.

In data entry, press s, then press e to return to

the Main Menu.

1-6 Getting Started

R Displays the next menu item.

L Displays the previous menu item.

E Selects the displayed menu item.

Use the alphanumeric keys to enter batch data. To switch between characters

and numbers, press s.

Startup

When you turn the printer on, the printer displays a copyright message. You will

see other messages as the printer loads formats.

The next message depends on how your printer is set up.

u

If your printer is set for online power-up mode, you will see:

PRINT MODE

Ready

u

If your printer is set for offline power-up mode, you will see:

MAIN MENU

l Print Mode r

Getting Started 1-7

Selecting a Function

The Main Menu has several functions (operating modes). These functions are

shown in the chart below.

If the printer displays PRINT MODE Ready when you

turn it on, press e to display the Main Menu.

To display menu options, press the arrow keys.

u

When the screen displays a right arrow, press R to display more options.

MAIN MENU

Cancel All r

u

When the screen displays a left arrow, press L to display more options.

MAIN MENU

l Diagnostics

u

When the screen displays a left and a right arrow, press either L or R to

display more options.

MAIN MENU

l Print Mode r

u

When you see the menu option you want, press E to select it.

Exiting an Option

To exit an option, press e once. You will exit to the next higher menu.

MAIN MENU

CANCEL

ALL

PRINT

MODE

REPEAT

BATCH

SETUP DIAG.

BATCH

ENTRY

1-8 Getting Started

When you press e, you lose any entries you have

made since the last time you pressed E.

Setting Up the Printer

Before you use the 9403 printer, you will need to set up your printer correctly.

You may need to refer to the Packet Reference Manual as well as this manual.

To set up your printer:

1. Load your supply. See Chapter 3, "Loading Supplies."

2. Load your ribbon, if needed. See Chapter 2, "Loading a Ribbon."

3. Set the supply type. See Chapter 4, "Setting Supply Options."

4. Set the printer port options to match your computer’s online communication

values. See Chapter 5, "Communication Values."

5. Set the defaults. See Chapter 7, "Setting Defaults."

6. Download a label design with a bar code. See the Packet Reference

Manual.

7. Check the print quality of the bar code with a verifier or your scanner.

Getting Started 1-9

8. If you do not have a verifier or scanner, check the bar code visually. A bar

code that is in spec will have complete bars and clear spaces. Small

alphanumeric characters will look complete. A bar code that is in spec may

not look as good as one that is too dark, but it will have the highest scan

rate.

9. If your print quality is not satisfactory, adjust your print contrast. See

Chapter 6, "Setting the Contrast."

10. Download another label. If the print contrast is still not satisfactory, call

Technical Support.

Dark

IN SPEC

Light

1-10 Getting Started

LOADING SUPPLIES 2

This chapter explains how to load supplies for continuous printing. The 9403

printer prints tags or labels in one strip.

The 9403 printer uses a standard 3-inch (76.2mm) core supply.

Loading Supplies 2-1

Supply Loading Diagram

The illustration below shows the correct routing for supplies and ribbon.

Guide the ribbon around the ribbon guide rollers when

loading.

Ribbon

Guide

Rollers

Ribbon

Supply

Guide

Roller

Supply

Roll

2-2 Loading Supplies

La pagina sta caricando ...

Monarch 9403 Operator's Handbook Manual

Monarch 9403 Operator's Handbook Manual

in altre lingue

Documenti correlati

Altri documenti