Turtle Beach Elite 800 Manuale utente

WIRELESS NOISECANCELLING DTS SURROUND SOUND HEADSET

USER GUIDE

2

Go to Table of Contents

Package Contents

A

E

B

F

C

G

D

H I

Turtle Beach

Elite 800 Headset

For our Knowledgebase and Technical Support visit

turtlebeach.com/support

Mobile Cable Digital Optical Cable Turtle Beach Sticker Turtle Beach Elite

Program Welcome

Elite 800

Preset Reference

Elite 800 Transmitter & Magnetic

Charging Stand

USB Transmitter

Cable

USB Programming

Cable

PRESET

REFERENCE

About the Elite 800 5

Parts and controls 7

Headset Charging 10

PS4™ and PS3™ Console Setup 11

PS4™ Setup 12

PS3™ Setup 14

Xbox One™ Setup 16

Windows® and Mac® OSX Computer Setup 20

Wired Setup 21

Bluetooth Pairing 22

Bluetooth Operation 23

Pairing the Headset and Transmitter 24

Active Noise Cancellation 25

Adjusting the Sound 26

Firmware Upgrades and Personalization 29

Replacing Rocker Plates 30

Specifications 31

Troubleshooting tips 32

Important safety information 34

Regulatory Compliance Statement 35

Declaration of Conformity 36

Warranty 40

4

Go to Table of Contents

About the Elite 800

The Turtle Beach Elite 800 is a sophisticated gaming headset designed to unlock the audio potential of games, music, mov-

ies and more. To get the most from your Elite 800, please take a few moments to review this introduction.

Overview

Welcome to the future of gaming audio with Turtle Beach Elite. Powerful sound, abundant comfort and dynamic function

combine to exceed your wildest expectations with the Turtle Beach Elite 800. Uncompromising, the Elite 800 is the ultimate

in completely wireless PS4 & PS3 noise-cancelling, surround sound gaming audio.

Silence is Golden

Eliminate unwanted distractions with Active Noise Cancellation in

console and mobile modes.

Crystal Clear Wireless

Intelligent channel-hopping for an interference-free

wireless experience.

DTS Headphone:X 7.1 Surround Sound

Creates an amazing, 3D 360-degree sound stage with unmatched

spatial accuracy.

Enhanced DTS Surround Sound Modes & Presets

Custom DTS Surround Sound modes combine with enhanced Turtle

Beach genre-specific presets to further immerse you in your favorite

games, movies and music.

Hidden, High-Quality Microphones

Dual hidden microphones, with environmental presets to ensure you are

always heard – regardless of your surroundings.

5

Go to Table of Contents

About the Elite 800

Magnetic Charging Stand

Low profile magnetic charging stand keeps your Elite 800 fully charged

without cables.

Bluetooth Versatility

Enjoy wireless Bluetooth connectivity with all your mobile devices

including PS Vita™.

Never Miss a Text or Call

Pair your mobile phone to hear text notifications or take calls

while gaming.

Rechargeable Battery

Built-in rechargeable battery delivers over 10 hours

of wireless gaming.

Companion App

Download the Ear Force Audio Hub app for Android™ OS to wirelessly

change presets on the fly using your mobile phone or tablet.

Swappable Rocker Plates

Easy-to-use rocker plates can be swapped with new designs from

turtlebeach.com/speakerplates.

6

Go to Table of Contents

About the Elite 800

Separate Volume Controls

Set your mix of game and chat volume levels right on the headset.

Stop SHOUTING!

Mic Monitoring lets you hear your own voice in the headset

to avoid shouting.

Dynamic Chat Boost™

Even during loud gameplay spikes, chat volume automatically rises to

ensure you never miss a command.

Easy Setup

Setup is easy from the USB and optical connections to the magnetic

charging stand, which doubles as the wireless transmitter

7

Go to Table of Contents

Parts and controls

Game Volume +/- Buttons

Raise and lower the Game Volume.

Bluetooth/Multi-Function Button

See the “Bluetooth Pairing

and Operation,” pages 22-23.

Power LED

HEADSET STATUS

Red = Charging

Blue = Active Noise Cancellation Off/Fully Charged

Pink = Active Noise Cancellation On

PAIRING STATUS

Single Blink = Headset Connected

Double Blink = Headset Not Connected

Power/ANC Button

Press = Active Noise Cancellation On/Off

Press and Hold = Headset Power On/Off

Headset Controls: Left Earcup

Mobile Connection

8

Go to Table of Contents

Parts and controls

Chat Volume +/- Buttons

Raise and lower Chat Volume

Mic Mute Button

Press = Mic On/Off. A high tone in the

Headset will confirm Mic On. A low tone

will confirm Mic Off.

Press and Hold = Cycle through Mic Presets.

Quiet Room > Normal Room > Loud Room >

Outdoor.

A voice prompt in the Headset will confirm

your selection. For more information, see

“Adjusting Sound,” page 26.

USB Charging Port.

For more information, see

“Headset Charging,” page 10.

Preset Button

Press = Cycle through Turtle Beach

Signature Audio Presets. A voice prompt

in the Headset will confirm your

selection.

Press and Hold = Cycle through DTS

Headphone:X Surround Modes. A voice

prompt in the Headset will confirm your

selection.

Bluetooth Status LED

AUDIO MODE

Blue = Call Mode (HSP)

Pink = Stereo Mode (A2DP)

PAIRING STATUS

Single Blink = Headset Connected

Double Blink = Headset Not Connected

Headset Controls: Right Earcup

Charging Contacts

DTS Headphone:X Surround Modes

GAME MODE MOVIE MODE MUSIC MODE SURROUND OFF

· Signature Sound

· Shooter

· Racing

· Sports

· Superhuman hearing

· Footstep Focus

· Signature Sound

· Action

· Horror

· Drama

· Signature Sound

· Stadium

· Acoustic

· Drama

· Natural Sound

· Bass Booster

· Bass & Treble Booster

· Vocal Booster

OFF

9

Go to Table of Contents

Parts and controls

Transmitter: Front

Transmitter: Back

Bluetooth Status LED

CHARGING STATUS

Red = Headset Seated on Transmitter

Blue = Headset Not Seated on Transmitter

PAIRING STATUS

Solid On = Headset Wirelessly Connected

Double Blink = Headset Not Connected

Power and Chat USB

Pairing Button

To initiate pairing, in the unlikely event that it

becomes necessary. See “Pairing the Headset

and Transmitter,” page 24.

Digital Optical Audio Out

For connection to a television

or external audio system.

Programming USB

For programming only. See “Firmware

Upgrades and Personalization,” page 29.

Digital Optical Audio Input

For connection to your Console

10

Go to Table of Contents

Headset Charging

Even when the Elite 800 operates via wired connection to mobile devices, it can still use the internal amplifier and so requires

power from its rechargeable battery. When charging, both the Headset Power LED and the Transmitter LED will glow Red.

NOTE: In order to achieve and maintain optimal battery performance for your Turtle Beach wireless headset, proper care is

required when charging and storing. Always charge the battery before storing the unit for more than 3 months! Never store the

unit in temperatures above 113°F/45°C. Store the headset at room temperature (72°F/22.5°C) and at humidity below 75%.

1.Connect the USB end of the USB Transmitter Cable to a USB port on the game console or computer.

2.Connect the micro-USB end of the USB Charging Cable to the Power and Chat USB Port on the Transmitter.

3. Place the Headset on the Transmitter. Align the charging contacts on the right earcup of the Headset with the charging pins

on the right side of the Transmitter.

NOTE: The Status LED on the front of the Transmitter will turn Red when the Headset is properly seated on the Transmitter. If

the Status LED is Blue or Pink, properly align the charging contacts of the Headset. If you are running older headset firmware

you may hear “Powering On, Power Off” prompts when first charging the headset. This is normal.

It is also possible to recharge the Headset during game play, with the use of a third-party USB-A-to-micro-USB cable, sold

separately. We recommend a cable of sufficient length for comfortable game play.

1. Connect the USB end of the third-party cable to a USB port on the game console or computer.

2. Connect the micro-USB end of the third-party cable to the USB Charging Port on the Headset.

NOTE: The Power LED on the Headset does not indicate charging status when you recharge via USB cable.

WARNING: Never fully deplete the battery then put the unit in storage, as this may cause irreversible damage to the battery.

Following these simple guidelines will ensure that your Turtle Beach wireless headset will provide many hours of enjoyment.

B

A

C

Go to Table of Contents

11

PS4™ and PS3™ Console Setup

The Elite 800 headset is designed for use with PS4™ and PS3™ consoles.

1. Connect the USB end of the USB Transmitter Cable to a USB port on the game console.

2. Connect the micro-USB end of the USB Transmitter Cable to the main USB port on the Transmitter.

NOTE: Do not use the USB port labeled “PROGRAM ONLY.”

3. Connect the Digital Optical Cable from the Digital Out port of the game console to the Digital In port of the Transmitter.

ConsoleConsole

DIGITAL OUT

(OPTICAL)

B

C F

12

Go to Table of Contents

PS4™ Setup

4. In the PS4 menu, go to Settings > Sound and Screen >

Audio Output Settings > Primary Output Port > Digital Out

(OPTICAL).

5. In the check-off boxes, select ONLY Dolby Digital 5.1 ch.

NOTE: Do not select DTS. While the Elite 800 features DTS

Headphone:X surround sound, the system requires a Dolby

Digital input signal.

6. Go to Settings >> Sound and Screen >>

Audio Output Settings >> Audio Format (Priority)

7. Select Bitstream (Dolby)

8. Go to Settings >> Devices >> Audio Devices

9. Select USB Headset(Turtle Beach Elite 800 Chat)

for Input & Output Device

10. Set Output to Headphones to Chat Audio

11. Set Volume Control (Headphones) level to maximum

Primary Output Port

Enter Back

x

Select the input format supported by the device (TV, AV amplifier or receiver) that is connected using the

DIGITAL OUT (OPTICAL) port.

Note that if the device does not support the selected format, the speakers might be damaged.

Dolby Digital 5.1ch

DTS 5.1ch

AAC

OK

Linear PCM 44.1kHz

Linear PCM 48.kHz

Audio Output Settings

Audio Format (Priority)

Primary Output Port

Enter Back

Linear PCM

Bitstream (Dolby)

Bitstream (DTS)

x

Audio Devices

Enter Back

Output Device

Input Device USB Headset(Turtle Beach Elite 800 Chat)

USB Headset(Turtle Beach Elite 800 Chat)

Adjust Microphone Level

Chat Audio

x

User 1

Output to Headphones

Volume Control (Headphones)

13

Go to Table of Contents

PS4™ Setup

12. Go to Settings > Devices > Audio Devices > Headsets and

Headphones > Microphone Level.

13. Follow the on-screen instructions to calibrate your

microphone

Microphone Level

User 1

Speak into the microphone and adjust the microphone level so that the input volume is in the

[Good] range.

Increase the microphone level if the input volume is too low, and decrease the microphone level

if the input volume is too high.

Back

Input Volume

Microphone Level

Too Low Good Too High

OK

14

Go to Table of Contents

PS3™ Setup

1. In the PS3 menus, go to Settings > Accessory Settings

> Audio Device Settings.

2. Set the Input Device and Output Device fields to Turtle Beach

Elite 800.

3. Go to Settings > Sound Settings > Audio Output Settings > Optical

Digital.

Audio Device Settings

Microphone Level 3

Input Device Turtle Beach Elite 800

Output Device Turtle Beach Elite 800

Back

X Enter

OK

Audio Output Settings

Select the connector on the TV or AV amplifier (receiver).

Turn on the power of the connected device.

Cancel

15

Go to Table of Contents

PS3™ Setup

5. Go to Settings > Sound Settings > Audio Multi Output.

6. Select On.

Audio Output Settings

12/14 12:15 PM

0

On

Sets to output audio through multiple connectors

simultaneously. Audio output to connectors that are

not selected in [Audio Output Settings] is downscaled

to 2 Ch.

4. In the check-off boxes, select ONLY Dolby Digital 5.1 Ch.

NOTE: Do not select DTS. While the Elite 800 features DTS

Headphone:X surround sound, the system requires a Dolby Digital

input signal.

Audio Output Settings

Select an output format supported by the TV or AV amplifier (receiver) in use. The system will

automatically adjust the output to match the selected format.

Dolby Digital 5.1 Ch.

DTS 5.1 Ch.

AAC

Linear PCM 2CH. 44.1 kHz

Linear PCM 2 Ch. 88.2 kHz

Linear PCM 2 Ch. 176.4 kHz

Linear PCM 2 Ch. 48 kHz

Cancel

X Enter

16

Go to Table of Contents

Xbox One Setup

1. Connect the USB end of the USB Transmitter Cable to a USB port on the game console.

2. Connect the micro-USB end of the USB Transmitter Cable to the main USB port on the Transmitter.

NOTE: Do not use the USB port labeled “PROGRAM ONLY.”

3.Connect the Digital Optical Cable from the S/PDIF port of the game console to the Digital In port of the Transmitter.

Requires Xbox One Headset Adapter (Sold Separately)

ConsoleConsole

DIGITAL OUT

(OPTICAL)

B

C F

17

Go to Table of Contents

Xbox One Setup

Use the two long pins to

properly align the adapter

5. Connect the Mobile Cable to the Xbox One headset adapter and the Mobile Connection on the left earcup

of the Headset.

6. Connect the Xbox One Controller to the Xbox One Console using the Micro USB Update Cable.

4. Insert the Xbox One headset adapter,

sold separately, into the Xbox One controller.

18

Go to Table of Contents

Xbox One Setup

7. Follow the on-screen prompts to update

your controller.

8. Take this time to update additional controllers

if necessary.

Note: If your adapter is not functioning correctly after

these steps, try updating your controller again.

To do this go to Settings >> System >> Update Controller.

This will repeat the original process.

9. Hold down the Chat Balance button on the Xbox One Audio Adapter until you hear a tone. This will allow game audio to

only travel through your Elite 800 transmitter.

Your controller needs an update

Home

FEATURED

An update is available for a recently connected Xbox One controller. Would you like to update it?

Update controller Cancel

Controller updated

The connected controller has been updated.

Do you want to update another controller?

Update another Exit

19

Go to Table of Contents

Color depth

36 bits per pixel

Color space

PC (RGB full)

Sound mixer Stereo uncompressed

Chat mixer

Allow 50 Hz refresh rate Setup TV & A/V control

Change volume with voice by

3 steps

Off

VIDEO FIDELITY CONSOLE VOLUME CONSOLE

Display & sound

Bitstream out

Color depth

36 bits per pixel

Color space

PC (RGB full)

Sound mixer

Chat mixer

Allow 50 Hz refresh rate Setup TV & A/V control

Change volume with voice by

3 steps

DTS Digital Sound

VIDEO FIDELITY CONSOLE VOLUME CONSOLE

Display & sound

Dolby Digital

About me

Network

Add to family Remove accounts

Closed

captioning

Display &

sound

Set up your family to

manage your

children’s Xbox

experiences.

Power &

startup

TV & OneGuide System

CC

Disc & Blu-ray

Kinect Preferences

TESTING LAB CONSOLE FAMILY OTHER PEOPLE

Privacy & online safty

Payment & billing

Subscriptions

My home Xbox

Sign-in, security &

passkey

Settings

Xbox One Setup

10. Go to Settings > Display & Sound > Optical Audio.

11. Select Bitstream Out.

12. Go to Settings > Display & Sound >

Bitstream Format.

13. Select Dolby Digital.

NOTE: Do not select DTS. While the Elite 800

features DTS Headphone:X surround sound, the

system requires a Dolby Digital input signal.

This step is particularly important for clear game

sound. If you skip this step, the Elite 800 will

receive two streams of game sound, slightly

out-of-sync. Clarity will be degraded.

9. Go to the Xbox One Home Screen and

Pres the button on the Xbox

One Controller.

20

Go to Table of Contents

Windows® and Mac® OSX Computer Setup

The Elite 800 can also be used on Windows or Mac OSX computers equipped with a Dolby Digital Live (DDL) sound card

using a digital optical S/PDIF output.

NOTE: Your computer must have a sound card with Dolby Digital Live installed in order to hear DTS Headphone:X surround

sound through the headset. If your computer does not have that, you will only hear enhanced stereo audio.

Connections for Windows and Mac computer game audio

1. Connect the USB end of the USB Transmitter Cable to a USB port on the computer.

2. Connect the micro-USB end of the USB Transmitter Cable to the main USB port on the Transmitter.

NOTE: Do not use the USB port labeled “PROGRAM ONLY.”

3. Connect the Digital Optical Cable to the Digital In port on the Transmitter and to the computer’s digital

optical output port.

4. Set your computer’s Digital Optical Output as the Default Playback (output) Device:

a.For Windows computers: Go to Start > Control Panel > Hardware and Sound > Sound > Playback tab. Right-click

Digital/Optical Output (or similar) and select Set as Default Device.

b.For Mac OSX computers: Go to Apple Menu > System Preferences > Sound > Output tab.

Select Digital/Optical Output (or similar) from the list.

5. Power on the Elite 800 Headset.

6. Play a track on your computer. You should hear audio in the Headset.

7. Set your computer’s Mic Input for Turtle Beach Elite 800 Chat:

a.For Windows computers: Go to Start > Control Panel > Hardware and Sound > Sound > Recording tab. Right-click

Turtle Beach Elite 800 and select Set as Default Device. Click OK to accept the settings and exit the Sound dialog box.

b.For Mac OSX computers: Go to Apple Menu > System Preferences > Sound > Input tab. Select Turtle Beach Elite 800

(or similar) from the list. Close the Sound dialog box and close the System Preferences folder.

DIGITAL OUT

(OPTICAL)

La pagina si sta caricando...

Turtle Beach Elite 800 Manuale utente

Questo manuale è adatto anche per

Turtle Beach Elite 800 Manuale utente

in altre lingue

Documenti correlati

Altri documenti