Alcatel-Lucent OmniTouch 8002 Manuale utente

Categoria
Telefoni
Tipo
Manuale utente

Questo manuale è adatto anche per

First
Alcatel-Lucent
OmniTouch ™ 8002/8012 DeskPhone
OmniPCX Office Rich Communication Edition
User Manual
8AL90879USBAed01b-1312 R100
How
User Manual
3
Introduction
Thank you for choosing a telephone from the OmniTouch äó range manufactured by Alcatel-Lucent.
How to use this guide
These symbols can be supplemented by small icons or text.
Lift the receiver.
Hang up.
Numeric keypad. Alpha-numerical keypad.
Use "OK" key to select an entry or confirm a choice.
Use up down navigation key to navigate within the menus.
In this user documentation, you will frequently see these two symbols. It means that you
must navigate within a menu with the up and down navigator until you find the label
specified on the right side of these symbols. You will then have to press on the OK key to
confirm your choice.
See description of your phone to learn how to use your phone's keys.
4
How
Contents
5
Toc
1.
Getting to know your telephone p. 6
1.1 Phone description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 6
2.
Using your telephone p. 7
2.1 Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 7
Call by dialing your correspondent's internal number
Make a call using the personal phone book (Directory )
Call by name
Redial last number
2.2 Receiving a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 8
Stop the ringer
Reject the call displayed
Answer the call
Interphony
2.3 Call log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 9
2.4 During a conversation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 9
Mute, so that your correspondent cannot hear you
Making a second call during a conversation
Answering a second call during a conversation
Placing a call on hold (hold)
Switching between calls (Broker call)
Transferring a call
Three-way conference
Sending DTMF signals
Adjust audio volume
3.
Keep in touch p. 13
Information about the phone
Diverting calls to another number (immediate diversion)
Modify the forward
Cancel the forward
Diverting your calls to your voice message service
Consulting your voice mailbox
4.
Set up your phone p. 15
Programming your personal directory
Configuring the telephone ringer
Adjusting screen contrast
Selecting language
Activate/deactivate identity secrecy
Select the headset (8012 only)
Guarantee and clauses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 19
Getting to know your telephone
1
6
Other
1.1
Phone description
Alpha-numerical keypad.
Start call key.
End call key.
Up Down navigation key to navigate within
menus, select menu, confirm a choice.
C key to erase a character when entering a number or string of characters. This key is also used
to navigate back one menu level.
Return to idle screen.
Quick access to the phone's main features.
Mute key: Press the Mute key during a conversation to prevent your contacts from
hearing you.
To adjust the loudspeaker or handset volume up or down.
Hands-free/Loudspeaker Key: To make or answer a call without lifting the receiver.
Access the voice mail feature or the list of missed calls. .
A wideband speaker for optimized sound.
LED : Arrival of a new call (Flashing ).
Stable foot.
One 3.5 mm headset connector (8012 only).
Various connections to allow phone extensions.
One 10/100 Ethernet connection to connect to enterprise LAN network (8002
set).
Two 10/100/1,000 Ethernet connection to connect to enterprise networks and a
PC (8012 set).
1 mini-USB connector for a specific AC/DC power supply. To be used only if your
phone requires an external power supply. Please refer to your installer.
1 RJ9 connector for a corded handset.
Using your telephone
2
7
Other
2.1 Making a call
Call by dialing your correspondent's internal number
OR
Make a call using the personal phone book (Directory )
Call by name
Dial directly number
Take the handset off the hook
OR
Start call key
OR
Handsfree key
Dial the number
•Directory (In idle state )
OR
From directory (If you have taken the line )
Select your correspondent from the list
If you have taken the line (with the handset or the hands free), the selected correspondent
is automatically called.
Call
Take the handset off the hook
Access the dial by name feature
OR
Communications
Select the dial by name feature
Enter the name of your correspondent
Select the correspondent
Start the call
8
Redial last number
T Redial the last outgoing call.
T Redial from redial list.
2.2 Receiving a call
Stop the ringer
Reject the call displayed
Answer the call
Interphony
When activating the interphony mode, all incoming calls are automatically answered by the phone.
Start call key
Call back the last dialed number
Long press on the start call key
Select the number to redial from the last dialed numbers
Once
OR
Silent
Twice
OR
Reject call
Lift the receiver
OR
Start call key
OR
Handsfree key
OR
Take call
In idle state
Press the interphony (mute) key
When the light associated with the key is lit (blue), the feature is activated
9
2.3 Call log
If you are away from your desk, you can consult the call log when you come back. You can consult
incoming calls, missed calls and outgoing calls.
T
Once you have selected an entry, you can:
You can have up to 25 entries for each type of call (incoming, outgoing or missed calls).
2.4 During a conversation
Mute, so that your correspondent cannot hear you
Making a second call during a conversation
When you are on a call, you can initiate a second call.
Call Log
Incoming calls
Outgoing calls
Missed calls
Call the correspondent
Save the entry in the local directory
Delete the entry
Delete all entries from the call log
Press the Mute key during a conversation to prevent your contacts from hearing you.
Disable microphone
The button is lit steady
Press the mute key again
Resume the conversation
The key is no longer lit
You are in conversation with one caller
New call
Number of second correspondent
OR
From directory
Select your correspondent from the list
OR
Dial by last name
Select your correspondent from the list
10
T To cancel your second call and recover the first:
Answering a second call during a conversation
T To return to your first caller and end the conversation in progress.
You are in conversation with one caller.
Display the second correspondent
Enquiry off
OR
Hang up
The second call is ended.
Display the first correspondent
Retrieve
You are in conversation with your first correspondent again.
You are in conversation and a correspondent is trying to contact you:
For a duration of 3 seconds the name of the second correspondent appears on the phone display:
Start call key
After the 3-second duration, the name of the correspondent doesn't appear anymore on the phone
display.
Display the second correspondent
Take call
The first call is on hold
You are in conversation with the second correspondent and the first one is on hold. You are in
conversation with the second correspondent and the first is on hold.
Display the second correspondent
Enquiry off
OR
Hang up
The second call is ended.
Display the first correspondent
Retrieve
You are in conversation with your first correspondent again.
11
Placing a call on hold (hold)
Switching between calls (Broker call)
Transferring a call
T You are in communication with a first correspondent.
T You are in communication with two correspondents.
You are in conversation with one caller.
Put on hold
Your call is placed on hold
Retrieve the correspondent on hold.
Retrieve
You are in communication with the first correspondent and the second is on hold.
Display the second correspondent
Retrieve
Your first call is placed on hold
New call
Call the recipient of the transfer
Before the second correspondent picks up :
Display the second correspondent
Transfer to
The two correspondents are connected
Return to idle screen
Select the current correspondent
Transfer
The two correspondents are connected
Return to idle screen
12
Three-way conference
You are in communication with a first correspondent. A second correspondent is on hold.
T
To end the conference.
T If you initiated the conference, when one of your correspondents leaves the conference,
you stay in conversation with the other correspondent.
T If you initiated the conference, you can leave the conference and put your two
correspondents in conversation.
Sending DTMF signals
During a conversation you sometimes have to send DTMF signals, such as with a voice server, an
automated attendant or a remotely consulted answering machine.
By default during a communication, your telephone in SIP mode is configured to send codes in voice
frequency: enter these codes directly using the keys on your telephone.
For more information regarding this configuration, contact the person in charge of your installation.
Adjust audio volume
During a call, to adjust the volume of the loudspeaker, receiver or headset:
Select the current correspondent
Conference
You are in conference mode
Select one of the correspondents
End conf
OR
Hang up
Transfer
Your two correspondents are in conversation
During a conversation.
Adjust audio volume
Keep in touch
3
13
Other
Information about the phone
Diverting calls to another number (immediate diversion)
Modify the forward
Cancel the forward
Diverting your calls to your voice message service
•Who am I?
Routing
Display the forwarding status (active/inactive)
Immediate forward
Enter the forward destination number
If needed, use the "C" key to erase characters
You can continue to make calls but can only receive calls on the phone to which you have
forwarded your calls.
Routing
Display the forwarding status (active/inactive)
Immediate forward
Enter the new number
If needed, use the "C" key to erase characters
Routing
Display the forwarding status (active/inactive)
Deactivate
Return to idle screen
Routing
Display the forwarding status (active/inactive)
Imm forward to VM
Return to idle screen
14
Consulting your voice mailbox
T Terminate consultation.
Display number of new and old messages
Voice mail
Confirm access to the voice mail by entering the password
Follow the instructions of the voice guide
•Exit
OR
Hang up
OR
Hang up
Set up your phone
4
15
Other
Programming your personal directory
You can store up to 100 numbers in your personal directory.
T Access your personal directory.
T Create a record in the personal phone book.
T Modifying a card in the personal directory.
•Directory
•New
1st name:
Enter the first name
Name:
Enter name
•Num:
Enter the number
Save the record
Return to idle screen
Enter the text: the number pad keys have letters that you can display by successive
presses. Some special characters can be displayed by successively pressing the key "*"
(+% $ / & ( ) [ ] =), the key "#" (@) or the key "1" (- _).
Select the card to be modified
Modify
1st name:
Enter the first name
Name:
Enter name
•Num:
Enter the number
Save the record
Return to idle screen
Enter the text: the number pad keys have letters that you can display by successive
presses. Some special characters can be displayed by successively pressing the key "*"
(+% $ / & ( ) [ ] =), the key "#" (@) or the key "1" (- _).
16
T Delete a record.
Configuring the telephone ringer
T Choose the tune.
T Adjusting the ringer volume.
T Activate/deactivate meeting mode (progressive ringing).
Select the card to delete
Delete
Return to idle screen
Settings
Phone
Ringing
Melody
Select the melody of your choice (16 tunes )
Return to idle screen
Level
Select the volume you want (9 levels )
Validate your choice
Return to idle screen
Ringing mode
Normal ringing
Silent mode
ProgressiveRinging
Return to idle screen
17
T Activate/deactivate discreet ring mode.
T Adjust ringer volume while a call arrives.
T Adjust ringer volume in idle mode.
Adjusting screen contrast
Selecting language
Beep
1 beep before ring
OR
3 beeps before ring
OR
Ring without beep
Return to idle screen
Your telephone rings.
Adjusting the ringer volume
Your telephone rings.
Return to idle screen
Select the volume you want (9 levels )
Settings
Phone
Contrast
Adjusting screen contrast
OR
Adjusting screen contrast
Validate your choice
Settings
Phone
Language
Select the language of your choice
Validate your choice
Set up your phone
4
18
Activate/deactivate identity secrecy
You can choose to hide your identity. Instead of your phone number normally displayed on your
external correspondent phone, "anonymous" will be displayed.
Select the headset (8012 only)
Settings
Phone
Secrecy Call
Activate
Settings
Phone
RJ9 plug
Handset
Headset
Guarantee and clauses
19
howtoc
Safety Instructions
Changes or modifications to the equipment not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
To limit the risk of interference, people with pacemakers must keep the wireless telephone away from
their equipment (minimum distance of 15 cm/6 inches).
Magnets could affect the functioning of pacemakers and implanted heart defibrillators. Keep a safe
distance between your pacemaker or implant defibrillator and the handset which includes magnetic
elements: 4 centimeters (1 inches) at least
It is recommended to follow the standard acceptance procedures before using this equipment in
human safety critical areas (hospitals...).
The handset includes magnetic elements that may attract sharp metallic objects. To prevent injury,
before each use ensure sharp metallic objects are not stuck to the earpiece.
Avoid using phones (other than cordless) during an electrical storm. There may be a remote risk of
electric shock from lightning
Do not use the device in environments where there is a danger of explosion
Do not plug this phone into an Integrated Services Digital Network (ISDN) connection or into a regular
Public Switched Telephone Network (PSTN) connection. This can result in severe damage to the
phone
Never allow your telephone to come into contact with water
To clean your telephone, use a soft damp cloth. Never use solvents (trichlorethylene, acetone, etc.)
which may damage the plastic parts of your telephone. Do not use aerosol cleaners.
Class 2 for OmniTouch äó 8012 DeskPhone according to IEEE802.3af), or via DC-in by a Certified
Direct Plug-In or Cord connected Power Unit approved as ȼLPS ÈÝ (Limited Power Source)
against CSA/UL/IEC 60950-1 and rated 5V dc, minimum 1A.
Allowed power supply is: SCE0501000P from Helms-Man
If you are connected to a POE connection do not use AC power supply
Regulatory Statements
Marking
This equipment is in compliance with the essential requirements of R&TTE Directive
1999/5/EC and with Directive 2011/65/UE (ROHS).
The Declaration of Conformity may be obtained from:
Alcatel-Lucent 3 avenue Octave Gréard 75007 Paris, France
ebg_global_supportcenter@alcatel-lucent.com.
USA and Canada
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation
is subject to the following two conditions : (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired
operation. This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to Part 15 of the FCC Rules and ICES-003 of Canada. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try correct the interference by consulting the dealer.
Guarantee and clauses
20
User Instructions
Only use the handset in temperatures between -5 C to +45 C (23 F to 113 F).
This apparatus is Hearing Aid Compatible (HAC).
Acoustic shock protection
The acoustic level of the signal generated by the handset earpiece is less than 130 dBspl for a transient
signal (123 dBspl for Australia) and less than 118 dBspl (rms) for a continuous signal (120 dBA for
Australia).
Directive 2003/10/EC specifying the risks inherent in noise at work
The ring contributes towards overall daily noise; at its maximum setting, the level is 105 dBA at 60 cm
from terminal. To reduce the level, the following is recommended:
- reduce the setting (9 levels of 5 dB)
- program a progressive ring.
Privacy
Privacy of communications may not be ensured when using the Bluetooth® handset or any additionnal
Bluetooth® device
Disposal
The equipment must be returned to a collection point for electronic equipment waste disposal.
Defective batteries must be returned to a collection point for chemical waste disposal.
Related Documentation
Other languages for these Safety and Regulatory Instructions and User Documentation are available
at the following Web site.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Alcatel-Lucent OmniTouch 8002 Manuale utente

Categoria
Telefoni
Tipo
Manuale utente
Questo manuale è adatto anche per