Alcatel-Lucent 8135S Manuale utente

Alcatel Lucent 8135S

and the app ALE Unite

USER GUIDE

OmniSound

®

– superior audio quality

The patented OmniSound

®

audio technology guarantees an impressive and crystal-clear

full-duplex audio in both directions. The sound is transmitted clearly and powerfully to all

attendees thanks to a hypersensitive microphone with 360° audio pick-up and speakers.

OmniSound

®

delivers HD audio during VoIP calls. It also incorporates automatic echo

cancellation and noise suppression, which minimises background noise interference, and an

equalizer for personal adaptation of the audio properties. There is no loss of audio quality, no

annoying sound clipping, damping or echoes as you move about the room, discussing and

talking with others. It's as close to real sound as you can get.

Alcatel Lucent Enterprise hereby declares that this conference phone is in conformity with all

the essential requirements and other relevant provisions of Directive 2014/53/EU.

Please visit www.al-enterprise.com to view the complete declaration of conformity.

Warning!

Do not expose the Alcatel Lucent 8135S to water or moisture.

Warning!

Do not open the casing of the Alcatel Lucent 8135S.

3

TABLE OF CONTENTS

Description 4

Keypad ............................................................ 5

Display............................................................. 6

Navigation and selection in menus ................... 7

Maintenance .................................................... 8

Connecting ...................................................... 8

Use with ALE Unite 9

Install the app ................................................. 9

Pairing and connecting .................................... 9

Calendar and today's agenda ......................... 11

Guided conference call .................................. 11

Manually starting a call .................................. 12

During a call .................................................. 12

Settings ......................................................... 13

Answering and making calls 14

Answering calls .............................................. 14

Answering calls on hold ................................. 14

Making calls................................................... 14

Redialling ....................................................... 15

Calling from the phone book .......................... 15

Use with a computer 16

Connecting to a computer .............................. 16

USB calls via a computer ............................... 16

During a call 17

Adjusting the speaker volume ........................ 17

Placing calls on temporary hold ..................... 17

Ending calls ................................................... 17

Secure connection ......................................... 17

Making multi-party calls 18

Adding another party to a call ........................ 18

Making conference group calls....................... 18

Managing phone lines 19

Switching between lines during

multi-party calls ............................................. 19

Managing phone lines .................................... 20

Cutting a line ................................................. 20

Transferring calls ........................................... 20

Proles 21

Using a user prole ........................................ 21

Changing the prole name and password ....... 22

Phonebook 23

Searching for contacts ................................... 23

Adding contacts ............................................. 23

Editing contacts ............................................. 23

Phone book ................................................... 24

Deleting contacts ........................................... 24

Deleting all conference groups ....................... 24

Displaying phonebook status.......................... 24

External phonebook (LDAP) 25

Search and dial contact ................................. 26

Conference guide 27

Making conference group calls....................... 27

Displaying conference group

participants ................................................... 28

Adding a conference group ............................ 28

Editing a conference group ............................ 28

Conference guide .......................................... 29

Deleting a conference group .......................... 29

Deleting all conference groups ....................... 29

Displaying conference guide status ................ 29

Recording 30

Starting a recording ....................................... 30

Mute function ................................................ 30

Hold .............................................................. 30

Ending a recording ......................................... 30

Listening to a recording .................................. 31

Editing the name of a recording ...................... 31

Recording ..................................................... 32

Deleting a recording ....................................... 32

Deleting all recordings .................................... 32

Adjusting the recording indicator .................... 32

Displaying recording feature status ............... 32

Settings 32

Basic settings ................................................ 33

Advanced settings ......................................... 35

Settings during a call ..................................... 36

System .......................................................... 37

Checking status ............................................. 38

Unite ............................................................. 40

Using the web interface 41

Checking network addresses ..........................41

Logging in to the Alcatel Lucent 8135S .......... 42

Managing the phonebook .............................. 43

Managing the conference guide ..................... 46

Checking the call list ...................................... 48

Basic settings ................................................ 49

Restarting the Alcatel Lucent 8135S .............. 51

Unite ............................................................. 52

Checking status ............................................. 53

Regulatory Statements 54

4

DESCRIPTION

SD memory

card port

USB port

Expansion micro-

phone port

DisplaySpeaker Microphone Keypad LEDs

Power supply port

Security lock port

AUX port

Network cable port

Expansion microphone port

LEDs

Flashing blue light Incoming call

Steady blue light Call in progress

Flashing red light Hold, microphone and speaker

turned off

Steady red light Mute, microphone turned off

NFC

symbol

5

KEYPAD

Writing text

Each button contains letters and characters - more than those shown on the button (see

illustration below). Press the same key repeatedly to change to another character. If there are

two letters under the same key that you want to enter one after the other, you need to pause

slightly before entering the second letter. For selection of lowercase/uppercase characters

please use up/down arrows.

Press C to delete the last character you entered.

DESCRIPTION

(blank) . - 1

G H I 4

P Q R S 7

D E F É È 3

M N O Ö Ø Ñ 6

W X Y Z 9

A B C Å Ä Á À 2

J K L 5

T U V Ü Ú 8

0

MENU,

settings menu

UP ARROW

navigation in menus,

display of call list

C

no/end/back,

recording

Increase volume

Decrease volume

Mute

HOLD

OK

yes/conrm choice

Answer/connect

new line

Hang up/end line

CONFERENCE

automatic dialling of

conference groups

CONTACTS

phonebook

DOWN ARROW

navigation in menus,

display of call list

Alphanumerical buttons, phonebook

6

DISPLAY

On Hook

Press to display this screen.

Off Hook

Press to display this screen.

Line status:

Line free (Before account name – telephone not registered)

Line connected (Before account name – telephone registered)

Line on hold (“HOLD” displayed on the screen – all calls on hold)

Line (called party) busy

Line put on hold by other party, actual action (“HELD” display on the screen)

Recording call

Secure connection

Information text displays one of the following:

• Number or name of each phone line

(The name will be displayed if a number is in the phonebook)

• Explanation of what you should do (for example ENTER NUMBER)

• Status (for example HOLD when placing all calls on hold)

DESCRIPTION

Date

Time

Mobile device connected via Unite

Display text (can be changed, see Admin guide)

Account name (can be changed)

Registered

Not registered

Call duration

Time

Information text (see below)

Phone lines (L1–L4)

Line status (see below)

Secure connection (see page 17)

7

Line menu

The line menu makes it possible to affect individual lines; put a call on hold, connect a

call on hold or cut the line. The (Conference) button toggles between the off hook

screen and line menu during a call. The line menu may also be reached by pressing

MENU > LINE MODE during a call.

Menu

Press MENU to switch to and from a menu.

NAVIGATION AND SELECTION IN MENUS



Press MENU.



Select the option you want from the menu using the arrow buttons.



Conrm by pressing OK to select the marked option.



Cancel the setting or go back one level in the menu by pressing C.



Quit the menu by pressing MENU again.



Note that after you have made changes to a setting, you must press OK to activate the

setting.

It is possible to open a menu option directly by pressing the number button that corre-

sponds to the position of the option in the menu (e.g. 2 to open PHONEBOOK and then

3 to select EDIT CONTACT).

DESCRIPTION

Line/number/name

New line

Option for creating or splitting conference calls

Current menu

Submenu

Marked option – open by pressing OK button

Scrolling list

(indication of where the marked option is in the list or menu)

List of setting options:

Existing settings

Marked option – select by pressing OK button

List of names:

Marked name – select by pressing OK button

8

DESCRIPTION

Writing style in instructions

In the instructions, MENU > SETTINGS (6) means you should:



Press MENU.



Mark the SETTINGS option using the arrow buttons and conrm by pressing OK

to open the menu (or press button number 6).

Correspondingly, Phone book > Conference Guide in the web interface means you

should select the Phone book menu and the Conference Guide tab.

Menu tree

It is simplest to make settings and edit contacts using a PC and the Alcatel Lucent 8135S

web interface (see page 42).

MAINTENANCE

Clean the equipment with a soft, dry cloth. Never use liquids.

CONNECTING

See the “Installation & Administration of Alcatel Lucent 8135S” on how to connect and

register the

conference phone.

See page 9 for wireless connection via ALE Unite.

See page 16 for connection to a computer via USB.

1 2 3 4 5 6 7 8 9

CONF GUIDE

BASIC

SETTINGS

SETTINGS SYSTEM STATUSRECORDING

DEFAULT

PROFILE 1

PROFILE 2

PROFILE 3

PROFILE 4

PROFILES

PHONE BOOK EXT. PHONE BOOK

SEARCH

CONTACT

ADD

CONTACT

EDIT

CONTACT

ERASE

CONTACT

ERASE

ALL

STATUS

SEARCH

GROUP

ADD

GROUP

EDIT

GROUP

ERASE

GROUP

ERASE

ALL

STATUS

PLAYBACK

FILE

RENAME

FILE

ERASE

FILE

ERASE

ALL

SETTINGS

STATUS

BASIC

ADVANCED

RESTART

REBOOT

FACTORY

RESET

ACCOUNTS

NETWORK

NAT

TRAVERSAL

MEDIA

TIME

DEVICE

ACCOUNTS

LANGUAGE

KEY TONE

RING LEVEL

EQUALIZER

AUX PORT

PA

TIME

FORMAT

DEFAULT

UNITE

DISCONNECT

ERASE

DEVICE

ERASE

ALL

STATUS

9

It is simple to connect the Alcatel Lucent 8135S to a mobile phone or tablet on which the

ALE Unite app is installed. The conference phone and your meetings can be managed from

the app instead of the phone's keypad. It’s much more personal, direct and intuitive when

you're holding the user interface in your hand. Call contacts straight from your local address

book, create conference groups, adjust the volume and other features.

The Alcatel Lucent 8135S and ALE Unite together bring One Touch Conferencing into the

conference room. A single touch is all it takes to start or join a phone meeting that's sched-

uled in your calendar.

INSTALL THE APP

ALE Unite is free to download from the App Store and Google Play. Download and install it

from the store like any other app.

PAIRING AND CONNECTING

The rst time you use the Alcatel Lucent 8135S with ALE Unite in your mobile phone, the

devices have to be paired as instructed in the app. They then connect with one click after the

app has been opened near the conference phone.

What to do:



Open ALE Unite. The closest Alcatel Lucent 8135S will then be displayed.

USE WITH ALE UNITE

10

The device name displayed is the name shown on the screen of that Alcatel Lucent 8135S

phone. (This text can be altered. See SCREEN and text settings in the administration manual

for the Alcatel Lucent 8135S).

When you select the Alcatel Lucent 8135S that you want to connect, a pairing code will be

displayed. Enter the code via the keypad on the conference phone and press OK. Pairing will

then start. When the devices are paired, the Unite connection symbol will be displayed in

both ALE Unite and the Alcatel Lucent 8135S.

ALE Unite and the Alcatel Lucent 8135S will remain paired while they are close to one

another and are being used. A connection breaks after 5 minutes of inactivity, i.e. when no

call is being held. The connection range is up to 20 metres, approximately, depending on the

setting. The connection breaks if this range is exceeded.

You will be asked to reconnect when ALE Unite next comes within range of the

Alcatel Lucent 8135S. One touch is all it takes to reconnect.

You can disconnect manually via the conference phone and the app.

Via the Alcatel Lucent 8135S:



Select: MENU > UNITE > DISCONNECT > conrm with OK.

Via ALE Unite:

Click on the Unite connection symbol in the upper left-hand corner of the screen and select

disconnect from the highlighted device.



Up to 100 mobile phones or tablets can be paired with a Alcatel Lucent 8135S. Note

however: Only one user at a time can be actively connected to the conference phone!

The number of paired mobile devices is displayed under the status menu in the

Alcatel Lucent 8135S.



Select: SETTINGS > UNITE > STATUS

The pairing can be deleted from the conference phone.



Select: MENU > UNITE > DELETE DEVICE or DELETE ALL DEVICES.

Symbol for Unite

connection

USE WITH ALE UNITE

11

CALENDAR AND TODAY'S AGENDA

Today’s agenda is displayed in the calendar view. Your bookings and meetings are download-

ed from your selected calendars and are displayed here (see Unite settings). A phone symbol

is displayed for each activity that contains call information . An overview and a list of other

meeting participants are displayed when you click on one of the scheduled conference calls.

ALE Unite can connect to remote meetings in different ways:

• via a Alcatel Lucent 8135S

• via a mobile phone

• via a UC client.

ALE Unite nds the phone numbers, PIN codes and meeting links in the calendar booking. If

you decide to connect to the conference call, ALE Unite automatically does the dialling and

identication.

You simply tap on one key - that's why it's called One Touch Conferencing.

Remember that the conference invitation format in the underlying calendar should comply

with the E164 international phone number standard. This guarantees that ALE Unite

interprets the information correctly, even if the app is able to manage most non-compliance

issues in a smart way.

GUIDED CONFERENCE CALL

A few simple steps help you connect your conference room to the remote meeting, using ALE

Unite’s automation support and just one touch of the button.

1. You have an invitation to a conference call in your calendar.

2. Shortly before the meeting (5, 10 or 15 minutes depending on your selected setting), a

notication is sent to your mobile phone.

3. As soon as you open ALE Unite, it will start to search for an available Alcatel Lucent

8135S and will display the one that is closest.

4. In the conference room, you connect to the meeting via the Alcatel Lucent 8135S there

by touching the button.

5. The phone dials the number and automatically enters the code for the meeting.

USE WITH ALE UNITE

12

MANUALLY STARTING A CALL

To start a call that is not scheduled in the calendar when ALE Unite is already connected to a

Alcatel Lucent 8135S:

• Select a number from your personal, local address book.

• Select a number from your selected favourites.

• Select a number from your call history.

• Dial a number manually using the keypad.

The Alcatel Lucent 8135S will then dial that number via the SIP account.

DURING A CALL

The ALE Unite app gives you complete, direct control of the Alcatel Lucent 8135S during the

call. You don't need to reach over to the keypad on the conference phone.

USE WITH ALE UNITE

Adjust the volume

Mute microphone

Ending calls

Put call on hold

Add participant

Create/split conference

Enter tone choice (DTMF)

13

SETTINGS

Click on the cogwheel in the upper right-hand corner to open ALE Unite’s settings menu.

Here are some of the features worth getting to know.

Connection to the Alcatel Lucent 8135S:

This is where you turn the app’s automatic search for conference phones on and off. We

recommend turning the search feature off if ALE Unite is used for One Touch Conferencing

on a mobile phone contract without the Alcatel Lucent 8135S.

Moderator code:

If you usually host conference calls over a bridge service, enter your moderator code here

along with the guest code you send out, and then leave the rest to ALE Unite.

Meeting notication:

If you want a reminder, you can set how many minutes (5, 10 or 15) before the meeting you

are to be notied.

Calendars to view:

All calendars in the mobile phone are viewed as a list. Tick the calendars from which you

want ALE Unite to retrieve information.

Guide:

A quick guide of the app’s features is presented the rst time it is opened. You can start this

guide again here if you need to.

USE WITH ALE UNITE

14

Beside from managing the Alcatel Lucent 8135S from the ALE Unite app, you can use the

keypad to make your conference calls.

ANSWERING CALLS

A ring tone will be heard and the blue LEDs start ashing.



Press

to answer.

The LEDs show a steady blue light.

ANSWERING CALLS ON HOLD

If a call is made to the conference phone during another call, you will hear a double tone,

INCOMING CALL will be displayed on the screen and the blue LEDs start ashing.



Press

to answer.

The original call will automatically be put on hold.

Press the

(Conference) button to connect the calls.

Press

to end the new call and

(Hold) to reconnect the original call.

Use the line menu (see page 20) to switch between the calls.

MAKING CALLS

See “MANAGING PHONE LINES” on page 19 about selecting an account before dialling.



Dial the number.



Press

.

The number is called and the LEDs show a steady blue light. The display shows the duration of the

call.

Or:



Press

.



Dial the number and press OK to conrm.

The number is called and the LEDs show a steady blue light. The display shows the duration of the

call.

ANSWERING AND MAKING CALLS

15

REDIALLING



Press an arrow button.

The last number that you dialled appears in the display.



Use the arrow buttons to scroll through the call list.



Press

.

The number selected is called.

You can delete the call list by scrolling to the end of the list and pressing OK when the

question “CLEAR LIST?” appears.

CALLING FROM THE PHONE BOOK

Please turn to page 24 for instructions on adding and updating contacts in the phonebook.



Press

(Contacts).

The phonebook appears on the display screen. The pre-programmed names appear in

alphabetical order.



Use the arrow buttons to mark the name in the phonebook.



Press

.

The number selected is called.

The Alcatel Lucent 8135S also supports an external phonebook in the form of a cata-

logue server (LDAP server). Find out more on page 26.

ANSWERING AND MAKING CALLS

16

USE WITH A COMPUTER

The Alcatel Lucent 8135S transforms your computer into high-quality conferencing equip-

ment with OmniSound

®

.

Unlike normal computer speakers and microphones, the Alcatel Lucent 8135S provides full

duplex (two-way audio) and efcient echo cancellation and static reduction.

The computer identies the Alcatel Lucent 8135S as an echo cancellation device which

means that communication software usually leaves the audio processing to the Alcatel

Lucent 8135S, resulting in better sound quality.

CONNECTING TO A COMPUTER



Connect the computer to the Alcatel Lucent 8135S using the USB cable provided.



The computer’s operating system normally automatically selects the Alcatel Lucent

8135S as a speaker and microphone. If the Alcatel Lucent 8135S is not automatically

selected as an audio device in the computer, you may have to access the computer

settings and manually select Alcatel Lucent 8135S.



If the computer has active software that is using the computer’s built-in speakers, you

may need to restart the software to switch to the new speaker (Alcatel Lucent 8135S).



A USB icon appears in the ALE Unite app during a USB call.

USB CALLS VIA A COMPUTER

For these instructions, it is assumed that the computer is turned on, the webmeeting

software is running, that the Alcatel Lucent 8135S is connected via the USB cable to the

computer, and that the Alcatel Lucent 8135S is selected as the audio device in the comput-

er’s settings.

Making USB calls



During a webmeeting, the Alcatel Lucent 8135S functions as a speaker and microphone

for the computer and the LEDs show a steady blue light.



If you are in an active conference call, incoming USB calls will be included.

Ending a USB call



End the call in the computer’s webmeeting software.

17

ADJUSTING THE SPEAKER VOLUME



Adjust the speaker volume using the buttons and .

PLACING CALLS ON TEMPORARY HOLD

Mute



Press

to turn the microphone off.

The LEDs change from blue to red. The other party cannot hear what you are saying.



Press

to reconnect the call.

Hold



Press

to place the call on hold.

The LEDs change from blue to ashing red. Both the microphone and the speaker are turned off

and the call is on hold.



Press

to reconnect the call.

ENDING CALLS



End the call by pressing

.

SECURE CONNECTION

The Alcatel Lucent 8135S supports secure data connections between devices (authentica-

tion and encryption). This feature must be activated by the administrator.

You know the feature is activated if you see a closed padlock in the lower right-hand corner

of the display screen when the Alcatel Lucent 8135S has a secure connection to the other

phone. If the phone or PBX you are calling does not support secure connections, you will see

an open padlock on the screen. See the illustration on page 6.

DURING A CALL

18

Turn to “MANAGING PHONE LINES” on the next page for instructions on putting an indi-

vidual on hold during a multi-party call and other more advanced features.

ADDING ANOTHER PARTY TO A CALL

If there are free lines, new parties can be added, regardless of whether you have used the

(Conference) button or if you are making a normal call.



Press

during the call to get a new dialling tone.

Calls in progress are put on hold.



Dial the new number.



You can also press an arrow button to use the call list or or or use the button

(Contacts) to access the phonebook.



Press the

(Conference) button to merge all lines into a multi-party call.

MAKING CONFERENCE GROUP CALLS

See “CONFERENCE GUIDE” on page 28 to create and edit conference groups.



Press the

(Conference) button.



Select the conference group you want to call and press OK to conrm.

The Alcatel Lucent 8135S dials all the contacts in the group.

The box in front of a person’s name lls as soon as that person answers.

MAKING MULTI-PARTY CALLS

19

SWITCHING BETWEEN LINES DURING MULTI-PARTY CALLS

Talking privately with one individual



Press

(Conference).

The line menu is displayed



Alternatively, you can select SPLIT CONFERENCE from the line menu to put

the lines on hold.



Press

.

The line menu is displayed.



Mark a party in the line menu and press OK or

(Hold).

The party is reconnected to the call.

Switching to another caller

This assumes that you are talking with just one individual as described above.



Mark another party in the line menu and press

(Hold).

The rst party is put on hold and the other is connected to the call.

Talking to several parties

This assumes that you are talking with just one individual as described above.



Mark another party in the line menu and press OK.

Both the rst and the second party are connected to the call.

Talking to all parties



Press

(Conference).

All parties are connected to the call.



An alternative way to connect all lines to the call is to select CREATE CONFERENCE in

the line menu.

MANAGING PHONE LINES

20

CUTTING A LINE

Individual lines can be cut out of a multi-party call.



Press

(Conference).

The line menu is displayed.



Mark the line you want to cut, then press

.

MANAGING PHONE LINES

La pagina sta caricando ...

Alcatel-Lucent 8135S Manuale utente

Alcatel-Lucent 8135S Manuale utente

in altre lingue

Documenti correlati

Altri documenti