Yamaha MCX-1000 Manuale del proprietario

UCG

B

A

2

IMPORTANT SAFETY INSTRUCTIONS

• Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within

an equilateral triangle, is intended to alert you to the

presence of uninsulated “dangerous voltage” within

the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral triangle

is intended to alert you to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

1

Read these instructions.

2

Keep these instructions.

3

Heed all warnings.

4

Follow all instructions.

5

Do not use this apparatus near water.

6

Clean only with dry cloth.

7

Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8

Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

9

Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the other.

A grounding type plug has two blades and a third grounding prong.

The wide blade or the third prong are provided for your safety. If the

provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10

Protect the power cord from being walked on or pinched particularly

at plugs, convenience receptacles, and the point where they exit from

the apparatus.

11

Only use attachments/accessories specified by the manufacturer.

12

Use only with the cart, stand, tripod, bracket,

or table specified by the manufacturer, or

sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13

Unplug this apparatus during lightning storms or when unused for

long periods of time.

14

Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way, such as

power-supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has been

dropped.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

3

We Want You Listening For A Lifetime

YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by

playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion - and, most

importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too late,

YAMAHA and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from

excessive volume levels.

FCC INFORMATION (for US customers)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions

contained in this manual, meets FCC requirements. Modifications

not expressly approved by Yamaha may void your authority,

granted by the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories and/

or another product use only high quality shielded cables. Cable/s

supplied with this product MUST be used. Follow all installation

instructions. Failure to follow instructions could void your FCC

authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply with the

requirements listed in FCC Regulations, Part 15 for Class “B”

digital devices. Compliance with these requirements provides a

reasonable level of assurance that your use of this product in a

residential environment will not result in harmful interference

with other electronic devices.

This equipment generates/uses radio frequencies and, if not

installed and used according to the instructions found in the users

manual, may cause interference harmful to the operation of other

electronic devices.

Compliance with FCC regulations does not guarantee that

interference will not occur in all installations. If this product is

found to be the source of interference, which can be determined by

turning the unit “OFF” and “ON”, please try to eliminate the

problem by using one of the following measures:

Relocate either this product or the device that is being affected by

the interference.

Utilize power outlets that are on different branch (circuit breaker

or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the

antenna. If the antenna lead-in is 300 ohm ribbon lead, change the

lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory results,

please contact the local retailer authorized to distribute this type of

product. If you can not locate the appropriate retailer, please

contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe

Ave, Buena Park, CA 90620.

The above statements apply ONLY to those products distributed

by Yamaha Corporation of America or its subsidiaries.

4

• To assure the finest performance, please read this manual carefully. Keep

it in a safe place for future reference.

• Install this unit in a well ventilated, cool, dry, clean place - away from

direct sunlight, heat sources, vibration, dust, moisture, and/or cold.

Avoid ventilation space of at least 30 cm on the top, 20 cm on the left

and right, and 10 cm on the back of this unit.

• Locate this unit away from other electrical appliances, motors, or

transformers to avoid humming sounds.

• Do not expose this unit to sudden temperature changes from cold to hot,

and do not locate this unit in a environment with high humidity (i.e. a

room with a humidifier) to prevent condensation inside this unit, which

may cause an electrical shock, fire, damage to this unit, and/or personal

injury.

• Avoid installing this unit where foreign object may fall onto this unit

and/or this unit may be exposed to liquid dripping or splashing. On the

top of this unit, do NOT place:

• Other components, as they may cause damage and/or discoloration on

the surface of this unit.

• Burning objects (i.e. candles), as they may cause fire, damage to this

unit, and/or personal injury.

• Containers with liquid in them, as they may fall and liquid may

electrical shock to the user and/or damage to this unit.

• Do not cover the rear panel of this unit with a newspaper, tablecloth,

curtain, etc. in order not to obstruct heat radiation. If the temperature

inside this unit rises, it may cause fire, damage to this unit, and/or

personal injury.

• Do not plug in this unit to a wall outlet until all connections are

complete.

• Do not operate this unit upside-down. It may overheat, possibly causing

damage.

• Do not use force on switches, knobs and/or cords.

• When disconnecting the power cord from the wall outlet, grasp the plug;

do not pull the cord.

• Do not clean this unit with chemical solvents; this might damage the

finish. Use a clean, dry cloth.

• Only voltage specified on this unit must be used. Using this unit with a

higher voltage than specified is dangerous and may cause fire, damage to

this unit, and/or personal injury. YAMAHA will not be held responsible

for any damage resulting from use of this unit with a voltage other than

specified.

• To prevent damage by lightning, disconnect the power cord from the

wall outlet during an electrical storm.

• Do not attempt to modify or fix this unit. Contact qualified YAMAHA

service personnel when any service is needed. The cabinet should never

be opened for any reasons.

• When not planning to use this unit for long periods of time (i.e.

vacation), disconnect the AC power plug from the wall outlet.

• Be sure to read the “TROUBLESHOOTING” section on common

operating errors before concluding that this unit is faulty.

• Before moving this unit, first check that there is no disc in the disc tray.

Finally, press STANDBY/ON to turn off this unit, and disconnect the

AC power plug from the wall outlet.

SPECIAL INSTRUCTIONS FOR U.K. MODEL

For U.K. customers

If the socket outlets in the home are not suitable for the plug supplied with

this appliance, it should be cut off and an appropriate 3 pin plug fitted. For

details, refer to the instructions described above.

Note: The plug severed from the mains lead must be destroyed, as a plug

with bared flexible cord is hazardous if engaged in a live socket outlet.

CAUTION: READ THIS BEFORE OPERATING THIS UNIT

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS UNIT TO RAIN OR MOISTURE.

Laser component in this product is capable of emitting radiation

exceeding the limit for Class 1.

IMPORTANT!

Please record the serial number of this unit in the space below.

Model:

Serial No.:

The serial number is located on the rear of the unit.

Retain this Owner’s Manual in a safe place for future reference.

IMPORTANT

The wires in this mains lead are coloures in accordance with the

following code:

GREEN-and-YELLOW:Earth

BLUE:Neutral

BROWN:Live

As the colours of the wires in the mains lead of this apparatus may not

correspond with the coloured markings identifying the terminals in your

plug proceed as follows: The wire which is coloured GREEN-and-

YELLOW must be connected to the terminal in the plug which is

marked by the letter E or by the safety earth symbol or coloured

GREEN or GREEN-and -YELLOW. The wire which is coloured BLUE

must be connected to the terminal which is marked with the letter N or

coloured BLACK. The wire which is coloured BROWN must be

connected to the terminal which is marked with the letter L or coloured

RED.

For Canadian Customers

To prevent electric shock, match wide blade of plug to wide slot and

fully insert.

This Class B digital apparatus complies with Canadian ICES-003.

Do not remove the wireless LAN card from the MCX-1000.

5

For US customers

For Canadian customers

For U.K. and European customers

CAUTION: READ THIS BEFORE OPERATING THIS UNIT

This equipment complies with FCC radiation exposure limits set forth

for uncontrolled equipment. This equipment should be installed and

operated with a minimum distance of at least 20cm between the radiator

and the persons body (excluding extremities: hands, wrists, feet, and

legs) and must not be co-located or operated with any other antenna or

transmitter.

Operation is subject to the following two conditions: (1) This device

may not cause interference, and (2), this device must accept any

interference received, including interference that may cause undesired

operation of the device.

The installer of this radio equipment must ensure that the antenna is

located or pointed such that it does not emit RF field in excess of Health

Canada limits for the general population: consult Safety Code 6,

obtainable from Health Canada's website www.hc-sc.gc.ca/rpb

We, the manufacturer YAMAHA hereby declare that the MCX-1000 is

in compliance with the essential requirements and other relevant

provisions of Directive 1999 / 5 / EC.

Vi, tillverkaren YAMAHA, betygar härmed att MCX-1000 är i

överensstämmelse med de erforderliga krav och andra tillämpliga

bestämmelser som anges i direktivet 1999/5/EC.

Noi, il fabbricante YAMAHA, con questo dichiariamo che MCX-1000

si trova in osservanza dei requisiti essenziali e delle altre normative

pertinenti della direttiva 1999 / 5 / EC.

Nosotros, el fabricante YAMAHA, declaramos por el presente

testamento que el MCX-1000 cumple con los requisitos esenciales y

otras provisiones pertinentes de la Directiva 1999/5/EC.

YAMAHA verklaart hierbij dat de MCX-1000 voldoet aan de essentiële

vereisten en andere relevante voorzieningen van Richtlijn 1999/5/EC.

Allen voor klanten in Nederland

Bij dit product zijn batterijen geleverd.

Wanneer deze leeg zijn, moet u ze niet

weggooien maar inleveren als KCA.

“Music recognition technology and related data are provided by Gracenote and

the Gracenote CDDB

®

Music Recognition Service

SM

. Gracenote is the industry

standard in music recognition technology and related content delivery. For more

information visit www.gracenote.com

.”

“CD and music-related data from Gracenote CDDB

®

Music Recognition

Service

SM

2000, 2001, 2002 Gracenote. U.S. Patents Numbers #5,987,525; #6,061,680;

#6,154,773, and other patents issued or pending.

CDDB is a registered trademark of Gracenote. The Gracenote logo and logotype,

the Gracenote CDDB logo and logotype, and the “Powered by Gracenote CDDB”

logo are trademarks of Gracenote. Music Recognition Service and MRS are

service marks of Gracenote.”

MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and

Thomson.

Supply of this product does not convey a license nor imply any right to distribute

content created with this product in revenue-generating broadcast systems

(terrestrial, satellite, cable and/or other distribution channels), streaming

applications (via Internet, intranets and/or other networks), other content

distribution systems (pay-audio or audio-on-demand applications and the like) or

on physical media (compact discs, digital versatile discs, semiconductor chips,

hard drives, memory cards and the like). An independent license for such use is

required. For details, please visit http://mp3licensing.com

This product contains AVE-TCP from ACCESS CO.LTD.

6

CONTENTS

Features of the MusicCAST server ................................8

About this manual ..........................................................8

What is the MusicCAST system? ...................................9

Supplied accessories ...................................................10

Controls and functions .................................................11

Front panel .............................................................11

Rear panel ..............................................................13

Remote control .......................................................14

Preparing the remote controls ......................................16

Preparing the MusicCAST server remote control ...16

Checking your system connections ..............................17

Component check list .............................................17

MusicCAST server standby and power modes ............18

Using this manual .........................................................19

Operating the MusicCAST server ................................20

Music storage formats ............................................21

Loading a CD into the MusicCAST server ..............21

The CD contents display screen ............................23

Storing a CD ...........................................................24

Auto-storing CDs ....................................................25

Recording audio material from an external

component on the MusicCAST server .........................26

Check component connections ..............................26

Recording ...............................................................27

Adjusting the recording level ..................................28

Setting the recording mode ....................................29

Selecting a song by its artist ........................................30

Selecting a song by its album ......................................32

Selecting a song by its genre .......................................34

Selecting a song by its name .......................................36

Using song linking ..................................................37

Selecting a song from the list of bookmarks ................38

The Play Information screen ........................................39

The Play Information screen time display ..............39

Using the Play Information screen Sub Menu ........39

Playback of songs from a preselected list (Playlist) .....41

Searching for a specific part of a song (Search) ..........43

Search forward .......................................................43

Search backward ....................................................43

Skipping to another song .............................................43

Skipping to the next song .......................................43

Returning to the start of the currently

playing song ...........................................................43

Skipping to the previous song ................................43

Groups .........................................................................44

Listening to albums ................................................44

Listening to artists ..................................................45

Listening to genres .................................................45

Listening to Playlists ...............................................45

Repeat Playback ..........................................................46

Random Playback ........................................................47

Using the MusicCAST server to listen to CDs ..............48

Using the MusicCAST server to listen to

external components ....................................................50

Listening to songs recorded from external

components .................................................................51

Listening to MP3 CDs ..................................................52

MP3 CD specifications ...........................................52

Bookmarking songs for listening ..................................53

To attach a bookmark .............................................53

To playback a bookmarked song ...........................53

Removing a bookmark ...........................................54

Deleting all bookmarks ...........................................54

Playback using the “Song Statistics” screen ................55

Displaying library item properties on screen ................56

Editing capabilities of the MusicCAST server ..............57

Editing album details ....................................................59

Opening the album editing screen (Sub Menu) ......59

Creating a new album ............................................60

Changing an album name ......................................60

Deleting an Album ..................................................61

Moving an album to another artist ..........................61

Moving an album to another genre .........................62

Editing artist details ......................................................64

Opening the artist editing screen (Sub Menu) ........64

Creating a new artist ..............................................65

Changing an artist name ........................................65

Deleting an artist ....................................................66

Editing Genre details ....................................................67

Opening the genre editing screen (Sub Menu) ......67

Creating a new genre .............................................68

Changing a genre name .........................................68

Deleting a genre .....................................................69

Editing songs ...............................................................70

Opening the song editing screen (Sub Menu) ........70

Changing a song name ..........................................71

Deleting a song ......................................................71

Editing songs recorded from external components ......72

Opening the song editing screen (Sub Menu) ........72

Changing a song name ..........................................73

Deleting a song ......................................................73

Moving a song ........................................................74

Making playlists ............................................................75

Deleting playlists and playlist items ........................77

Changing playlist and collection names .................77

Moving playlists ......................................................78

Using the on-screen keyboard to enter characters ......78

Using a PS/2 keyboard with the MusicCAST server ....79

Connecting a PS/2 keyboard to the

MusicCAST server .................................................79

Other keyboard functions .......................................79

CD recording song formats ....................................80

Selecting songs to record from the songs

stored in the MusicCAST server ..................................80

Changing the song order ........................................83

Removing a song from the recording list ................84

Getting started

Storing music on the MusicCAST server

Playback

Editing

Creating CDs

7

Recording a CD to a CD-R (Duplicating a CD) ............ 85

Setting recording parameters ......................................88

Making a high quality recording .............................88

Selecting a recording format ..................................88

Setting recording speed .........................................88

Setting the Recording auto level function ...............88

Deleting a CD-RW (Initialization) .................................89

Automatically adjusting YAMAHA AV receiver

surround program effect settings for a genre ...............91

Checking the status of a MusicCAST client .................92

MusicCAST client playback from the

MusicCAST server .......................................................93

Locking and unlocking MusicCAST clients ..................94

Stopping and starting playback on all

MusicCAST clients simultaneously ..............................95

Controlling the MusicCAST client Sleep

mode from the MusicCAST server ...............................95

Editing MusicCAST client names .................................96

MusicCAST Server Timer functions .............................97

Starting playback on the MusicCAST

server at a preset time ...........................................97

Starting recording on the MusicCAST

server at a preset time ...........................................98

Activating the MusicCAST server Timer function ...99

MusicCAST client Timer functions .............................101

Starting playback on MusicCAST clients

at a preset time ....................................................101

Activating the MusicCAST client Timer function ..102

What is a wireless network connection,

and when should I use one? ................................104

What is a wired network connection,

and when should I use one? ................................105

MusicCAST network configuration .............................106

Preparing to use Auto Configuration ....................106

Using Auto Configuration .....................................106

MusicCAST Server network “Expert Settings” ...........108

IP address screen ................................................108

DHCP service screen ...........................................110

Wireless LAN screen ............................................111

Viewing the MusicCAST Server network status ........112

IP Address screen ................................................112

Wireless LAN screen ............................................113

MusicCAST client ID manual configuration ............... 113

System Setup menus ...........................................115

Default system settings ........................................115

Opening the system setting screens ..........................117

Setting the date and time ...........................................117

Setting the video output parameters ..........................119

Setting the Gracenote CDDB connection .................. 119

Setting the auto-play function ....................................120

Set the MusicCAST server data storage format ........ 121

Setting AV receiver parameters ................................. 122

Turning the Auto Levelling function on and off .......... 124

Setting the screen display .......................................... 124

Enabling PCM format playback on MusicCAST

clients ......................................................................... 125

Setting up a PS/2 keyboard ....................................... 126

Setting the standby mode .......................................... 127

Setting the brightness of the front panel display ........ 127

Deleting data from the hard disk drive ....................... 128

Updating the MusicCAST system ..............................128

Resetting the MusicCAST server to factory

defaults ......................................................................129

Opening the system information screens .................. 130

Checking hard drive capacity .....................................131

Checking the number of songs stored in the

MusicCAST server .....................................................131

Checking MP3 encoding status .................................132

Checking the system version .....................................132

Checking AV receivers the MusicCAST server

can control .................................................................133

CD/CD-R/CD-RW compatible with this unit ............... 134

Rules of digital recording and notes on system .........136

Rules of digital recording ..................................... 136

Notes on system .................................................. 136

TROUBLESHOOTING ............................................... 137

Terms used in this manual ......................................... 140

Playback .............................................................. 140

Recording ............................................................. 140

Network connections ............................................ 140

Hardware ............................................................. 141

Software ............................................................... 142

Specifications ............................................................. 143

Index .......................................................................... 144

Using the MusicCAST with a YAMAHA AV

receiver

Controlling MusicCAST clients

Using the Timer function for playback and

recording

Configuring the MusicCAST network

System setup

Checking system information

Appendix

8

Getting started

The MusicCAST system uses a wireless network to connect the MusicCAST server and MusicCAST clients,

which call up and play songs stored in the MusicCAST server. You can use a MusicCAST client anywhere where

it can receive wireless network signals from the MusicCAST server.

Feature include

• High speed storage of Audio CDs to the internal hard disk drive.

• Wireless transmission to MusicCAST clients, allowing independent operation of all components in the

MusicCAST system.

• Display of information on songs, albums, artists, and genres stored on the MusicCAST server hard disk drive.

• Control of YAMAHA AV receivers through an RS-232C connection.

• High quality recording to CD-R discs using Advanced Audio Master Quality Recording.

This manual contains the following sections:

■ Getting started

Explains the basic usage and concept of the MusicCAST server.

■ Storing music on the MusicCAST server

Explains how to store music from CDs and external components on the internal hard disk drive of the MusicCAST

server.

■ Playback

Explains how to play back music from the MusicCAST server using criteria such as album and artist names to

search for songs.

■ Editing

Explains how to manage songs stored on the MusicCAST server.

■ Creating CDs

Explains how to create CDs using songs you select from those stored on the MusicCAST server.

■ Using the MusicCAST with a YAMAHA AV receiver

The MusicCAST server can control certain functions on a YAMAHA AV receiver if you connect the two

components using a cross-type RS-232C cable. This section explains how to connect the MusicCAST server and

AV receiver and use them together.

■ Controlling MusicCAST clients

Explains how to control MusicCAST clients from the MusicCAST server.

■ Using the Timer function for playback and recording

Explains how to use the Timer function to record and playback audio material.

■ Configuring the network

Explains how to configure the network parameters to enable MusicCAST clients to connect to the MusicCAST

server. It also explains how to connect the MusicCAST server to the Internet.

■ System setup

Explains how to configure system settings (on-screen display, system time etc) of the MusicCAST server.

■ Checking system information

Explains how to check system information such as space remaining on the hard disk drive, and the number of

songs currently stored in the MusicCAST server.

■ Trouble shooting

Offers suggestions to follow when your MusicCAST server appears to be functioning incorrectly.

Features of the MusicCAST server

About this manual

This owner’s manual refers to the MCX-1000 DIGITAL AUDIO SERVER as the MusicCAST server and the

MCX-A10 DIGITAL AUDIO TERMINAL as the MusicCAST client.

Getting started

9

The MusicCAST system consists of two components, the MusicCAST server and the MusicCAST client, which

allow you to store music and play it back in multiple locations. You can store many of the CDs in your collection and

play them back whenever you want, rather like a Juke box. The two components in the system are explained below.

The MusicCAST server acts as a storage space for music and other audio material. The MusicCAST server can store many

music CDs on its internal hard disk drive, which it can then play back, or distribute to MusicCAST clients for playback at a

distance. It records the names of the songs, artist, album, and the music genre of the CD during the storage process, allowing

easy access to the songs without requiring you to enter any data by hand. You can then use these criteria to look for and

select songs for playback simply and quickly. You can also set the MusicCAST Server to play songs at random, repeat one

particular song, or select from a number of other playback options.

NOTE

The actual number of CDs the MusicCAST server can store depends on the format you choose to store songs in. Typically it can

store approximate 100 CDs in PCM format on its 80 GB hard disk drive, or approximate 1000 CDs if you choose to store the

songs in MP3 formats only.

The MusicCAST client acts as a player for the songs stored on the MusicCAST server.

Since the MusicCAST client can connect to the MusicCAST server through a wireless connection, you can install it without

having to use any connecting cables. You can, for example, install a MusicCAST server in your living room, and

MusicCAST clients in your bedroom and childrens’ rooms, then connect and listen to the music stored in the MusicCAST

server from each location. The MusicCAST client allows you to search for songs in the same manner as the MusicCAST

server, by selecting a song, album, artist, or genre.

Additionally, because the MusicCAST server is capable of connecting to up to seven MusicCAST clients simultaneously,

you can play different songs on multiple MusicCAST clients at the same time.

NOTE

• The MusicCAST server is capable of distributing music to up to 7 MusicCAST clients simultaneously. Depending on factors

such as the playback format you are using and the strength of the network signal available to MusicCAST clients connecting via

wireless connections, it may be advisable to reduce the number of MusicCAST clients in your MusicCAST system if you

encounter problems with playback.

• When using many MusicCAST clients simultaneously, the MusicCAST system is sensitive to changes or weakness in network

signal strength. To ensure smooth playback select a low MP3 bitrate to store songs in (see page 121).

• Changes in the strength of the network signal, or a weak network signal, can easily affect playback of songs distributed to

MusicCAST clients in PCM format over wireless network connections. If playback skips or pauses, set the MusicCAST server to

distribute songs to MusicCAST clients in MP3 format.

What is the MusicCAST system?

AV receiverSpeaker Speaker

MusicCAST server

TV/Monitor

Speaker Speaker

MusicCAST client

What is the MusicCAST server?

What is the MusicCAST Client?

Getting started

10

After unpacking, check that the following parts are included.

• Remote Control • Batteries (size AA, UM-3, or R6) (2)

• Audio Pin Cable (1)

• Optical Cable (1)

• Video Pin Cable (1)

Supplied accessories

Getting started

11

Front panel

1 STANDBY/ON

Switches the MusicCAST server between standby and power

on modes. Press and hold STANDBY/ON for two seconds to

place all MusicCAST clients in sleep mode and place the

MusicCAST server in standby mode.

2 Disc tray

3 PLAY INFO.

Displays the Play Info. screen on the on-screen display.

4 MENU

Returns the on-screen display to the Menu screens when the

MusicCAST server is displaying the Play Information screen.

5 TOP MENU

Returns the on-screen display to the Top Menu.

6 LAN STANDBY indicator

Lights when:

(1) The MusicCAST server is in LAN standby mode.

(2) The MusicCAST server places itself in LAN standby mode

after not being used for more than 30 minutes.

7 TIMER indicator

Lights when the MusicCAST server Timer function is

activated.

8 BACK

Returns one level up the menu.

9 SUB MENU

Displays the Sub Menu where applicable.

0 Controller

Moves the cursor on the on-screen display and enters, deletes,

plays, or selects the selection highlighted on the on-screen

display, as appropriate.

A CLIENT STATUS indicators

Light when MusicCAST clients connected to the MusicCAST

server are activated and able to play back songs.

Indicators 1,2,3,4 indicate the status of clients 1,2,3 and 4.

Indicator 5 lights when clients 5,6 or 7 are active.

These indicators may not go out immediately when you turn a

MusicCAST client off or place it in standby mode.

B PAGE

Scrolls the menu page down when the contents the

MusicCAST server is displaying cannot be displayed on one

menu page.

C PAGE

Scrolls the menu page up when the contents the MusicCAST

server is displaying cannot be displayed on one menu page.

D (OPEN/CLOSE)

Opens and closes the disc tray.

E (STOP)

Halts playback on the MusicCAST server.

F (PLAY)

Starts playback of the selected item.

G CD AUTO STORE

Starts the automatic CD storage process.

H ENCODING indicator

Lights when the MusicCAST server is converting PCM files to

MP3 files.

I PS/2 KEYBOARD jack

Connect a PS/2 keyboard to this input for easy data entry.

J PHONES jack

Connect your headphones to this jack.

Controls and functions

1

DEFGHI J KLMN

234567890ABC

Getting started

12

K LEVEL control

Controls the volume level of the output to your headphones.

L ANALOG REC LEVEL control

Controls the recording level when recording from a source

connected to the ANALOG IN jacks.

M Front panel door

N Front panel display

Displays information on the operations and status of the

MusicCAST server.

Getting started

13

Rear panel

1 VIDEO jacks

The MusicCAST server outputs its on-screen display to a TV/

monitor connected to its video output jacks.

NOTE

The MusicCAST server does not record any video signal.

Video signals from the S VIDEO IN and VIDEO IN jacks

are passed directly to the S VIDEO OUT and VIDEO OUT

jacks respectively, and are not processed in the

MusicCAST server at all.

• S VIDEO IN jack

Connects to the S VIDEO output from your video component

using an S VIDEO cable.

• S VIDEO OUT jack

Connects to the S VIDEO input on your TV/monitor using an S

VIDEO cable.

• VIDEO IN jack

Connects to the VIDEO output from the video component.

• VIDEO OUT jack

Connects to the video input on your TV/monitor.

2 LAN terminal

Connects to a network or switching hub using a LAN / CAT 5

cable.

• LINK indicator

Lights up when the MusicCAST server is connected to a local

area network.

• ACTIVE indicator

Lights up when the MusicCAST server is transmitting or

receiving data over a local area network.

3 Wireless LAN antenna

4 RS-232C terminal

Connects to the RS-232C terminal on your YAMAHA AV

receiver using a cross-type RS-232C cable to allow the

MusicCAST server to control certain functions on the AV

receiver.

5 AUDIO jacks

• OPTICAL (digital) IN jack

Connects to the optical digital output jack on an external

component to receive signals from the component over a

digital optical connection.

• OPTICAL (digital) OUT jack

Connects to the optical digital input jack on an external

component to transmit signals to the component over a digital

optical connection.

• COAXIAL (digital) IN jack

Connects to the coaxial digital output jack on an external

component to receive signals from the component over a

digital coaxial connection.

• COAXIAL (digital) OUT jack

Connects to the coaxial digital input jack on an external

component to transmit signals to the component over a digital

coaxial connection.

• ANALOG IN jacks

Connects to the analog output jacks on an external component

to receive signals from the component over an analog

connection.

• ANALOG OUT jacks

Connects to the analog input jacks on an external component to

transmit signals to the component over to end of an analog

connection.

6 FAN

7 HDD slot

8 AC power cord

1

234 5 6

78

Getting started

14

Remote control

1 STANDBY/ON

Switches the MusicCAST server between standby and power

on modes. Press and hold STANDBY/ON for two seconds to

place all MusicCAST clients in sleep mode and place the

MusicCAST server in standby mode.

2 TIMER

Activates the MusicCAST server Timer function.

3 ARTISTS

Displays the Artists screen on the on-screen display.

4 ALBUMS

Displays the Albums screen on the on-screen display.

5 PLAYLISTS

Displays the Playlists screen on the on-screen display.

6 SONG STATISTICS

Displays the Song Statistics screen on the on-screen display.

7 EXT. INPUTS

Displays the External Input screen on the on-screen display.

8 RECORDING

Displays the Recording screen on the on-screen display.

9 PAUSE

Pauses/Unpauses playback on the MusicCAST server.

0 REPEAT

Cycles through the MusicCAST server repeat modes.

A

Accesses the previous track in the playback group you are

listening to.

B

Accesses the next track in the playback group you are listening

to.

C STOP

Halts playback on the MusicCAST server.

D MENU

Returns the on-screen display to the Menu screens when the

MusicCAST server is displaying the Play Information screen.

E TOP MENU

Returns the on-screen display to the top menu.

F GROUP

Accesses the previous playback group.

G BACK

Returns one level up the menu.

H (cursor left)

Moves the on-screen cursor to the left.

I SELECT

Enters, deletes, plays, or selects the selection highlighted on

the on-screen display, as appropriate.

J SUB MENU

Displays the Sub Menu where applicable.

K BROADCAST

This key is reserved for future functionality.

L FUNC1 / VOL

Reduces the volume level of a YAMAHA AV receiver

connected to the MusicCAST server with a cross-type

RS-232C cable. The “FUNC” designation indicates that this

key will gain more functionality in the future.

M FUNC2 / VOL

Increases the volume level of a YAMAHA AV receiver

connected to the MusicCAST server with a cross-type

RS-232C cable. The “FUNC” designation indicates that this

key will gain more functionality in the future.

N OPEN / CLOSE

Opens and closes the disc tray.

4

6

5

7

8

9

A

B

C

D

F

E

G

I

J

K

L

M

H

0

2

3

1

N

O

P

Q

R

S

T

U

V

W

X

Y

Z

[

\

]

^

a

b

c

d

Getting started

15

O ALL SONGS

Displays the All Songs screen on the on-screen display.

P GENRES

Displays the Genres screen on the on-screen display.

Q CD

Displays the CD screen on the on-screen display.

R BOOKMARKS

Displays the Bookmarks screen on the on-screen display.

S CLIENT PLAYBACK

Displays the Client Playback screen on the on-screen display.

T AV RECEIVER

Displays the AV Receiver screen on the on-screen display.

U TIME

Cycles the time display mode on the Play Information screen.

V RANDOM

Cycles the random playback mode on the Play Information

screen.

W

Searches forward through the song you are currently listening

to.

X

Searches backward through the song you are currently

listening to.

Y PLAY INFO.

Displays the “Play Info.” screen on the on-screen display.

Z PLAY

Starts playback of the selected item.

[ BOOKMARK ON/OFF

Attaches or removes a bookmark from a song.

\ GROUP

Accesses the next playback group.

] PAGE

Scrolls the menu page up when the contents the MusicCAST

server is displaying cannot be displayed on one menu page.

^ (cursor up)

Moves the on-screen cursor up.

a (cursor right)

Moves the on-screen cursor to the right.

b (cursor down)

Moves the on-screen cursor down.

c PAGE

Scrolls the menu page down when the contents the

MusicCAST server is displaying cannot be displayed on one

menu page.

d FUNC3 / MUTE

Mutes the sound outputs from a YAMAHA AV receiver

connected to the MusicCAST server with a cross-type

RS-232C cable.

Getting started

16

Preparing the MusicCAST server

remote control

■

Inserting the batteries

1 Remove the cover on the underside of the

remote control.

2 Insert two AA batteries into the battery

compartment, checking that the positive (+) and

negative (–) terminals on the batteries

correspond to the polarity markings on the

case.

3 Slide the cover back until it snaps into place.

■

Battery replacement

If you find that the remote control must be used closer

to the main unit than usual, the battery is weak.

Replace the battery with new one.

■

Notes on batteries

• Please use AA size batteries.

• Do not use old batteries together with new ones.

• Do not use different types of batteries (such as alkaline

and manganese batteries) together.

• Do not use rechargable batteries.

• Remove the batteries from the remote control if you do

not intend to use it for an extended period.

• If the battery leaks, dispose of it immediately. Avoid

touching the leaked material or letting it come in contact

with clothing, etc. Skin contact may cause burn. If it

occurs, wash with water promptly and get medical

attention.

• Do not connect the positive (+) and negative (–) terminals

of any one-battery together.

■

Using the remote control

• If using this remote control causes other equipment to

malfunction, change the location of the equipment.

• Do not spill water or other liquids on the remote control.

• Do not store or leave the remote control in conditions of

high temperature or humidity, such as near a stove, heater,

or bath.

• Do not place the MusicCAST server in locations where the

signal receiver will be in direct sunlight or near lighting

equipment. The remote control may not function correctly

in these conditions.

Preparing the remote controls

1

2

3

30˚

Approx. 6m

Signal receiver

Getting started

17

You must connect your MusicCAST system correctly to use all of its functions to the full. Follow the instructions in

the attached “Setup guide” carefully when setting up your system.

Component check list

❍

TV/monitor

Allows you to carry out all operations on the MusicCAST server from the on-screen display.

❍

MusicCAST client

Plays any of the songs stored in the MusicCAST server.

❍

AV receiver, speakers

Connect speakers and an amplifier or AV receiver to the MusicCAST server if you wish to listen to music stored

on its hard disk drive from the MusicCAST server directly.

❍

Internet

When song, artist, album, or genre titles are not present in its built-in Gracenote CDDB database the MusicCAST

server can use an Internet connection to download relevant information from the Gracenote CDDB online

service. We recommend that you use a broadband router to connect to the Internet. Connecting to the Internet is

not absolutely necessary, but enhances the experience of using the MusicCAST system.

❍

PS/2 keyboard (OPTIONAL)

Allows you to easily enter and edit information such as album and song titles on the MusicCAST server.

❍

MusicCAST client speakers

Connect speakers to the MusicCAST client if you wish to listen to music from it directly.

Checking your system connections

MusicCAST

client

AUDIO

AV receiver

Keyboard

TV/Monitor

PS/2 KEYBOARD (OPTIONAL)

SpeakerSpeaker

VIDEO

MusicCAST

client

MusicCAST server

Getting started

18

The MusicCAST server has four different standby and power modes, and uses each in a specific set of

circumstances. The MusicCAST server consumes power in all modes, however standby modes generally

consume less power than when the MusicCAST is in power on mode.

The following diagram illustrates the MusicCAST server standby and power on modes, and the actions required

to move between them. The figures in brackets indicate the amount of electricity consumed per hour in that

particular mode.

If you do not use the MusicCAST server for more than 30 minutes, it is not encoding MP3 files, and there are no

MusicCAST clients turned on and connected to the MusicCAST server, it automatically places itself in LAN

standby mode, regardless of your standby mode settings.

MusicCAST server standby and power modes

Do not disconnect the MusicCAST server from AC power when it is in Sleep mode. When disconnecting the

MusicCAST server from AC power, always press and hold STANDBY/ON for at least 2 seconds to place it in

standby mode before disconnecting it from the AC outlet.

Power on

STANDBY : Green

Front panel display : Lit

OSD : Optional

TIMER : Optional

LAN STANDBY : Optional

ENCODING : Optional

CLIENT : Optional

LAN standby

STANDBY : Red

Front panel display : Unlit

OSD : Off

TIMER : Optional

LAN STANDBY : Lit (orange)

ENCODING : Off

CLIENT : Off

Sleep

STANDBY : Red

Front panel display : Unlit

OSD : Off

TIMER : Optional

LAN STANDBY : Optional

ENCODING : Optional (*1)

CLIENT : Optional (*1)

IR Standby

STANDBY : Red

Front panel display : Unlit

OSD : Off

TIMER : Optional

LAN STANDBY : Unlit

ENCODING : Unlit

CLIENT : Unlit

• STANDBY/ON key (OFF)

• TIMER END

• STANDBY/ON key (ON)

•TIMER START

(*1 One of these lights will always

flash when the MusicCAST server is

in Sleep Mode)

• Encoding complete

• MusicCAST client OFF

• TIMER END

•TIMER START

• STANDBY/ON key (ON)

•TIMER START

• MusicCAST client

on

•TIMER START

• STANDBY/ON

key (OFF)

• Forced standby

• After idling for 30

minutes

• TIMER END

• STANDBY/ON key (OFF)

• Forced standby

• TIMER END

• STANDBY/ON key (ON)

•TIMER START

• Encoding complete

• MusicCAST client

OFF

• TIMER END

LAN STANDBY

indicator

STANDBY

indicator

ENCODING

indicator

Front panel

display

TIMER

indicator

CLIENT

indicator

Getting started

19

This section gives a brief sequential explanation of the procedures involved in using your MusicCAST server.

Refer to it as a guide to using this manual.

Using this manual

SECTION TITLE CONTENT

1 Getting started Use the manual, check your system connections, and learn

about the basic operations of the MusicCAST server.

2 Storing music on the

MusicCAST server

Store Audio CDs and audio material from external

components connected to the MusicCAST server. Enter

information on material that you have stored, such as artist,

album, genre, or song titles. This information is useful when

you wish to use such criteria as artist, album, or genre

name when playing back songs on the MusicCAST server

or clients, and when making original CDs from the songs

you store on the MusicCAST.

3 Playback Search for songs by criteria such as song or album name,

make lists of your favorite songs, or play back songs at

random.

4 Editing Add or change information such as song, artist, or genre

names, and make and edit lists of your favorite songs.

5 Creating CDs Make original CDs from the songs stored on the

MusicCAST server. Additionally, you can duplicate CDs

you own onto CD-R or CD-RW discs.

6 Using the MusicCAST with a

YAMAHA AV receiver

Use the MusicCAST server to adjust volume, change

inputs and effect programs, and control other functions on

a RS-232C equipped YAMAHA AV receiver connected to

the MusicCAST server with a cross-type RS-232C cable.

7 Controlling MusicCAST clients Remotely control any MusicCAST clients connected to

your MusicCAST server. This function allows you to

operate multiple MusicCAST clients simultaneously, and

check what individual MusicCAST clients are playing.

8 Using the Timer function for

playback and recording

Use the Timer to automatically start playback on the

MusicCAST server or clients, or place a component in

standby mode, at the time set in the Timer display on the

MusicCAST server. You can also set the MusicCAST

server to begin recording material at a designated time.

9 Configuring the MusicCAST

network

Configure the MusicCAST server so that MusicCAST

clients can connect to it over a wired or wireless network.

Additionally, you can configure the MusicCAST server to

work together with other components in an existing

network.

10 System setup Set parameters such as keyboard type, on-screen display

color schemes, and date and time, to suit the conditions

you use your MusicCAST server in.

11 Checking system information Check the remaining time available for song storage,

system firmware version, and other information pertaining

to your MusicCAST system.

12 Appendix Refer to this section when your MusicCAST server appears

to be functioning incorrectly.

Getting started

20

Use the remote control and the television connected to your MusicCAST server to carry out the procedures

described in this manual.

If you connect your MusicCAST server to a television, you can search for CD titles, artist names, and other data

on screen. You can also set all the other parameters used to operate the MusicCAST system from this on-screen

display.

This manual assumes that you have connected your MusicCAST server to a TV/monitor, and uses illustrations of

the on-screen display to explain operations where appropriate.

Most of the explanations in this manual center on using the remote control to operate MusicCAST components,

but you can also access most functions directly from the MusicCAST server and client units. Refer to the

illustrations provided with each explanation to check which keys or buttons are applicable, and use those controls

indicated for each numbered step to carry out procedures.

Operating the MusicCAST server

2002 YAMAHA AII rights reserved

c

La pagina si sta caricando...

Yamaha MCX-1000 Manuale del proprietario

Yamaha MCX-1000 Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti