Bunn-O-Matic ITB Istruzioni per l'uso

Marca: Bunn-O-Matic

Modello: ITB

Tipo: Istruzioni per l'uso

ITB

DAILY CLEANING INSTRUCTIONS

42395.0000A 08/09 ©2009 Bunn-O-Matic Corporation

DO NOT KEEP BREWED BEVERAGES OVERNIGHT

42395 082609

STEP 2

Once a day, clean and sanitize

both of the brew funnels, fun-

nel tip and screen assembly.

STEP 1

Wipe the sprayhead panel

clean with a damp cloth.

Wipe down the entire outside

surface of the brewer with a

clean damp cloth.

Thoroughly rinse the dis-

penser with clean water. Al-

low the dispenser to air dry

over night

STEP 7 STEP 8 STEP 9 STEP 10

Prepare a sanitizer solu-

tion in a clean bucket (1/4

gallon). Use a commercial

sanitizer that has 50-100 ppm

of available chlorine with a

concentration level of at least

3% available chlorine (KAY-5

Sanitizer). Follow the mixing

instructions to ensure 100

ppm of available chlorine.

Pour a small amount of

sanitizer solution into the

dispenser. Use a bristle

brush (BOM #00674.0000)

to clean all the way through

the faucet shank. Repeat

several times.

STEP 6

Thoroughly clean the entire

inside surface of the dis-

penser and the faucet shank

using a small brush (BOM

#00674.0000) mild detergent

and water solution. Thor-

oughly rinse the dispenser

with clean water.

Assemble the faucet compo-

nents and attach the faucet

to the dispenser turning

clockwise.

Transfer these parts to a three

compartment sink for clean-

ing. Fill the ﬁrst sink with a

soap solution using a mild

detergent, the second sink

is used for clean rinse, and

the third sink with a sanitizer

solution (75°F warm chlorine

solution of at least 50-100

ppm).

Use a bristle brush (BOM

#00674.0000) to thoroughly

scrub the faucet body.

Once a day, turn the faucet in

a counterclockwise direction

and remove the faucet from

the dispenser. Unscrew the

faucet cap from the faucet

body and disassemble all

faucet parts.

Allow the parts to soak in a

sanitizer solution for a mini-

mum of ten minutes.

STEP 1 STEP 2 STEP 3 STEP 4

Remove the faucet parts from

the sanitizer solution and rinse

thoroughly. Allow parts to air

dry over night.

STEP 5

TEA RESERVOIR

BREWER

Draw a small amount (2 oz.)

of presoak through the faucet

making contact with the faucet

components. Allow the dis-

penser to soak over night. The

next morning, perform the

daily cleaning procedures on

the faucet and dispenser.

Once a week, ﬁll the dispenser

with a chlorine solution (75°F

warm chlorine solution of at

least 50-100 ppm).

STEP 1 STEP 2

STEP 3

Use the long end of sprayhead

cleaning tool to clean the

sprayhead outlet ﬁtting.

ITB

WEEKLY CLEANING INSTRUCTIONS

42395.0000A 08/09 ©2009 Bunn-O-Matic Corporation

42395 082609

Once a month, replace the

faucet seat cup (B.O.M.

#00600.0000). Discard the

old seat cup.

The faucet assembly (B.O.M.

#03260.0001) can be ordered

for replacement.

STEP 1

STEP 2

MONTHLY CLEANING INSTRUCTIONS

DO NOT KEEP BREWED BEVERAGES OVERNIGHT

STEP 2

Remove and thoroughly rinse

the sprayhead. The holes

must be open and clear of

any mineral deposits.

STEP 4

Re-install the sprayhead.

STEP 1

Once a week, remove the

sprayhead.

TEA RESERVOIR

BREWER

TEA RESERVOIR

1
2

Bunn-O-Matic ITB Istruzioni per l'uso

Marca: Bunn-O-Matic

Modello: ITB

Tipo: Istruzioni per l'uso

Scarica il pdf

in altre lingue

English: Bunn-O-Matic ITB Operating instructions

Altri documenti