Kenwood KDC-BT450DAB Manuale utente

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

B5K-0770-00 [EN]

KDC-BT950DAB KMM-BT407DAB

KDC-BT450DAB KMM-DAB307

ENGLISH

FRANÇAIS

DEUTSCH

NEDERLANDS

ITALIANO

ESPAÑOL

CD-RECEIVER / DIGITAL MEDIA RECEIVER

Quick Start Guide

AUTORADIO CD / RÉCEPTEUR MULTIMÉDIA NUMÉRIQUE

Guide de démarrage rapide

CD-RECEIVER / DIGITAL-MEDIA-RECEIVER

Schnellstartanleitung

CD-RECEIVER / DIGITALE MEDIAONTVANGER

Snelstartgids

SINTOLETTORE CD / RICEVITORE MULTIMEDIALE DIGITALE

Guida di avvio rapido

RECEPTOR CD / RECEPTOR DE MEDIOS DIGITALES

Guía de inicio rápido

For detailed operations and information, refer to the INSTRUCTION MANUAL on the following

website:

Pour les opérations et les informations détaillées, reportez-vous au MODE D’EMPLOI sur le

site web suivant:

Für detaillierte Bedienungen und Informationen siehe BEDIENUNGSANLEITUNG auf der

folgenden Website:

Raadpleeg de GEBRUIKSAANWIJZING op de volgende website voor gedetailleerde informatie

over de bediening:

Per le operazioni e le informazioni dettagliate, fare riferimento al ISTRUZIONI PER L’USO nel

seguente sito web:

Para obtener más información y detalles sobre las operaciones, consulte el MANUAL DE

INSTRUCCIONES en el siguiente sitio web:

<www.kenwood.com/cs/ce/>

JS_KWD_QSG_KDC_BT950DAB_EN_C00.indd 1JS_KWD_QSG_KDC_BT950DAB_EN_C00.indd 1 2/6/2020 2:29:57 PM2/6/2020 2:29:57 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

i

Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable

for countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste.

Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling

these items and their waste byproducts.

Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and

waste disposal will help conserve resources whilst preventing detrimental effects on our health and the

environment.

Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead.

Information sur l’élimination des anciens équipements électriques et électroniques et piles

électriques (applicable dans les pays qui ont adopté des systèmes de collecte sélective)

Les produits et piles électriques sur lesquels le pictogramme (poubelle barrée) est apposé ne peuvent pas

être éliminés comme ordures ménagères.

Les anciens équipements électriques et électroniques et piles électriques doivent être recyclés sur des sites

capables de traiter ces produits et leurs déchets.

Contactez vos autorités locales pour connaître le site de recyclage le plus proche. Un recyclage adapté et

l’élimination des déchets aideront à conserver les ressources et à nous préserver des leurs effets nocifs sur

notre santé et sur l’environnement.

Remarque: Le symbole “Pb“ ci-dessous sur des piles électrique indique que cette pile contient du plomb.

Entsorgung von gebrauchten elektrischen und elektronischen Geräten und Batterien

(anzuwenden in Ländern mit einem separaten Sammelsystem für solche Geräte)

Das Symbol (durchgestrichene Mülltonne) auf dem Produkt oder seiner Verpackung weist darauf hin, dass

dieses Produkt nicht als normaler Haushaltsabfall behandelt werden darf, sondern an einer Annahmestelle

für das Recycling von elektrischen und elektronischen Geräten und batterien abgegeben werden muss.

Durch Ihren Beitrag zur korrekten Entsorgung dieses Produktes schützen Sie die Umwelt und die

Gesundheit Ihrer Mitmenschen.

Unsachgemässe oder falsche Entsorgung gefährden Umwelt und Gesundheit. Weitere Informationen

über das Recycling dieses Produktes erhalten Sie von Ihrer Gemeinde oder den kommunalen

Entsorgungsbetrieben.

Achtung: Das Zeichen „Pb“ unter dem Symbol fur Batterien zeigt an, dass diese Batterie Blei enthalt.

Informatie over het weggooien van elektrische en elektronische apparatuur en batterijen

(particulieren)

Dit symbool geeft aan dat gebruikte elektrische, elektronische producten en batterijen niet bij het normale

huishoudelijke afval mogen.

Lever deze producten in bij de aangewezen inzamelingspunten, waar ze gratis worden geaccepteerd en op

de juiste manier worden verwerkt, teruggewonnen en hergebruikt.

Voor inleveradressen zie www.nvmp.nl, www.ictmilieu.nl, www.stibat.nl. Wanneer u dit product op de

juiste manier als afval inlevert, spaart u waardevolle hulpbronnen en voorkomt u potentiële negatieve

gevolgen voor de volksgezondheid en het milieu, die anders kunnen ontstaan door een onjuiste verwerking

van afval.

Opgelet: Het teken “Pb” onder het teken van de batterijen geeft aan dat deze batterij lood bevat.

Informazioni sullo smaltimento delle vecchie apparecchiature elettriche ed elettroniche e

delle batterie (valide per i paesi che hanno adottato sistemi di raccolta differenziata)

I prodotti e le batterie recanti il simbolo di un cassonetto della spazzatura su ruote barrato non possono

essere smaltiti insieme ai normali rifiuti di casa.

I vecchi prodotti elettrici ed elettronici e le batterie devono essere riciclati presso un’apposita struttura in

grado di trattare questi prodotti e di smaltirne i loro componenti.

Per conoscere dove e come recapitare tali prodotti nel luogo a voi più vicino, contattare l’apposito ufficio

comunale. Un appropriato riciclo e smaltimento aiuta a conservare la natura e a prevenire effetti nocivi alla

salute e all’ambiente.

Nota: Il simbolo “Pb” sotto al simbolo delle batterie indica che questa batteria contiene piombo.

Información acerca de la eliminación de equipos eléctricos, electrónicos y baterías al final de

la vida útil (aplicable a los países que hayan adoptado sistemas independientes de recogida

de residuos)

Los productos y las baterías con el símbolo de un contenedor con ruedas tachado no podrán ser desechados

como residuos domésticos.

Los equipos eléctricos, electrónicos y baterías al final de la vida útil, deberán ser reciclados en

instalaciones que puedan dar el tratamiento adecuado a estos productos y a sus subproductos residuales

correspondientes.

Póngase en contacto con su administración local para obtener información sobre el punto de recogida más

cercano. Un tratamiento correcto del reciclaje y la eliminación de residuos ayuda a conservar los recursos y

evita al mismo tiempo efectos perjudiciales en la salud y el medio ambiente.

Nota: El símbolo “Pb” debajo del (contenedor con ruedas tachado) en baterías indica que dicha batería

contiene plomo.

JS_KWD_QSG_KDC_BT950DAB_EN_C00.indd iJS_KWD_QSG_KDC_BT950DAB_EN_C00.indd i 2/6/2020 2:30:01 PM2/6/2020 2:30:01 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

ii

/ :

The marking of products using lasers

The label is attached to the chassis/case and says that the component uses laser beams that have been

classified as Class1. It means that the unit is utilizing laser beams that are of a weaker class. There is no

danger of hazardous radiation outside the unit.

Marquage des produits utilisant un laser

L’étiquette est attachée au châssis/boîtier de l’appareil et indique que l’appareil utilise des rayons laser

de classe 1. Cela signifie que l’appareil utilise des rayons laser d’une classe faible. Il n’y a pas de danger de

radiation accidentelle hors de l’appareil.

Kennzeichnung von Geräten mit Laser-Abtastern

Das Etikett ist am Chassis/Gehäuse angebracht und besagt, dass sich die Komponente Laserstrahlen

bedient, die als Laserstrahlen der Klasse 1 klassifiziert wurden. Dies weist darauf hin, dass sich das Gerät

Laserstrahlen bedient, die einer schwächeren Klasse angehören. Das bedeutet, dass durch den sehr

schwachen Laserstrahl keine Gefahr durch gefährliche Strahlungen außerhalb des Geräts besteht.

Markering op produkten die laserstralen gebruiken

Dit label is aangebracht op de behuizing/houder en toont dat de component een laserstraal gebruikt die

als Klasse 1 is geclassificeerd. Dit betekent dat de laserstraal relatief zwak is en er geen gevaar van straling

buiten het toestel is.

Etichetta per i prodotti che impiegano raggi laser

L’etichetta si trova sul rivestimento o sulla scatola e serve ad avvertire che il componente impiega raggi

laser che sono stati classificati come classe 1. Ciò significa che l’apparecchio utilizza raggi laser di una classe

inferiore. Non c’è alcun pericolo di radiazioni pericolose all’esterno dell’apparecchio

La marca para los productos que utilizan láser

Esta etiqueta está colocada en el chasis e indica que el componente funciona con rayos láser de clase1. Esto

significa que el aparato utiliza rayos láser considerados como de clase débil. No existe el peligro de que este

aparato emita al exterior una radiación peligrosa.

For Israel

Declaration of Conformity with regard to the RE Directive 2014/53/EU

Declaration of Conformity with regard to the RoHS Directive 2011/65/EU

Manufacturer:

JVCKENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

EU Representative:

JVCKENWOOD Europe B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS

Déclaration de conformité se rapportant à la directive RE 2014/53/EU

Déclaration de conformité se rapportant à la directive RoHS 2011/65/EU

Fabricant:

JVCKENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

Représentants dans l’UE:

JVCKENWOOD Europe B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS

JS_KWD_QSG_KDC_BT950DAB_EN_C00.indd iiJS_KWD_QSG_KDC_BT950DAB_EN_C00.indd ii 2/6/2020 2:30:01 PM2/6/2020 2:30:01 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

iii

Konformitätserklärung in Bezug auf die RE-Vorschrift 2014/53/EU

Konformitätserklärung in Bezug auf die RoHS-Vorschrift 2011/65/EU

Hersteller:

JVCKENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

EU-Vertreter:

JVCKENWOOD Europe B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, Niederlande

Conformiteitsverklaring met betrekking tot de RE-richtlijn van de Europese

Unie (2014/53/EU)

Conformiteitsverklaring met betrekking tot de RoHS richtlijn van de Europese

Unie (2011/65/EU)

Fabrikant:

JVCKENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

EU-vertegenwoordiger:

JVCKENWOOD Europe B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, Nederland

Dichiarazione di conformità alla Direttiva RE 2014/53/EU

Dichiarazione di conformità relativa alla direttiva RoHS 2011/65/EU

Produttore:

JVCKENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

Rappresentante UE:

JVCKENWOOD Europe B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS

Declaración de conformidad con respecto a la Directiva RE 2014/53/EU

Declaración de conformidad con respecto a la Directiva RoHS 2011/65/EU

Fabricante:

JVCKENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

Representante en la UE:

JVCKENWOOD Europe B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, Países Bajos

English

Hereby, JVCKENWOOD declares that the radio equipment

“KDC-BT950DAB/KDC-BT450DAB/KMM-BT407DAB/

KMM-DAB307” is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available

at the following internet address:

http://www.kenwood.com/cs/ce/eudoc/

Français

Par la présente, JVCKENWOOD déclare que l’équipement

radio « KDC-BT950DAB/KDC-BT450DAB/KMM-BT407DAB/

KMM-DAB307 » est conforme à la directive 2014/53/UE.

L’intégralité de la déclaration de conformité UE est

disponible à l’adresse Internet suivante :

http://www.kenwood.com/cs/ce/eudoc/

Deutsch

Hiermit erklärt JVCKENWOOD, dass das Funkgerät

“KDC-BT950DAB/KDC-BT450DAB/KMM-BT407DAB/

KMM-DAB307” der Richtlinie 2014/53/EU entspricht.

Der volle Text der EU-Konformitätserklärung steht unter der

folgenden Internetadresse zur Verfügung:

http://www.kenwood.com/cs/ce/eudoc/

Nederlands

Hierbij verklaart JVCKENWOOD dat de radioapparatuur

“KDC-BT950DAB/KDC-BT450DAB/KMM-BT407DAB/

KMM-DAB307” in overeenstemming is met Richtlijn

2014/53/EU.

De volledige tekst van de EU-verklaring van

overeenstemming is te vinden op het volgende

internetadres:

http://www.kenwood.com/cs/ce/eudoc/

Italiano

Con la presente, JVCKENWOOD dichiara che l΄apparecchio

radio “KDC-BT950DAB/KDC-BT450DAB/KMM-BT407DAB/

KMM-DAB307” è conforme alla Direttiva 2014/53/UE.

Il testo integrale della dichiarazione di conformità UE è

disponibile al seguente indirizzo internet:

http://www.kenwood.com/cs/ce/eudoc/

Español

Por la presente, JVCKENWOOD declara que el equipo de radio

“KDC-BT950DAB/KDC-BT450DAB/KMM-BT407DAB/

KMM-DAB307” cumple la Directiva 2014/53/EU.

El texto completo de la declaración de conformidad con la UE

está disponible en la siguiente dirección de internet:

http://www.kenwood.com/cs/ce/eudoc/

Português

Deste modo, a JVCKENWOOD declara que o equipamento de

rádio “KDC-BT950DAB/KDC-BT450DAB/KMM-BT407DAB/

KMM-DAB307” está em conformidade com a Diretiva

2014/53/UE.

O texto integral da declaração de conformidade da UE está

disponível no seguinte endereço de internet:

http://www.kenwood.com/cs/ce/eudoc/

Polska

Niniejszym, JVCKENWOOD deklaruje, że sprzęt radiowy

“KDC-BT950DAB/KDC-BT450DAB/KMM-BT407DAB/

KMM-DAB307” jest zgodny z dyrektywą 2014/53/UE.

Pełny tekst deklaracji zgodności EU jest dostępny pod

adresem:

http://www.kenwood.com/cs/ce/eudoc/

Český

Společnost JVCKENWOOD tímto prohlašuje, že rádiové

zařízení “KDC-BT950DAB/KDC-BT450DAB/KMM-BT407DAB/

KMM-DAB307” splňuje podmínky směrnice 2014/53/EU.

Plný text EU prohlášení o shodě je dostupný na následující

internetové adrese:

http://www.kenwood.com/cs/ce/eudoc/

Magyar

JVCKENWOOD ezennel kijelenti, hogy a

„KDC-BT950DAB/KDC-BT450DAB/KMM-BT407DAB/

KMM-DAB307“ rádióberendezés megfelel a 2014/53/EU

irányelvnek.

Az EU konformitási nyilatkozat teljes szövege az alábbi

weboldalon érhető el:

http://www.kenwood.com/cs/ce/eudoc/

JS_KWD_QSG_KDC_BT950DAB_EN_C00.indd iiiJS_KWD_QSG_KDC_BT950DAB_EN_C00.indd iii 2/6/2020 2:30:01 PM2/6/2020 2:30:01 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

iv

Svenska

Härmed försäkrar JVCKENWOOD att

radioutrustningen “KDC-BT950DAB/

KDC-BT450DAB/KMM-BT407DAB/KMM-DAB307”

är i enlighet med direktiv 2014/53/EU.

Den fullständiga texten av EU-försäkran

om överensstämmelse finns på följande

Internetadress:

http://www.kenwood.com/cs/ce/eudoc/

Suomi

JVCKENWOOD julistaa täten, että radiolaite

“KDC-BT950DAB/KDC-BT450DAB/KMM-BT407DAB/

KMM-DAB307” on direktiivin 2014/53/EU

mukainen.

EU-vaatimustenmukaisuusvakuutusvaatimus

löytyy kokonaisuudessaan seuraavasta internet-

osoitteesta:

http://www.kenwood.com/cs/ce/eudoc/

Slovensko

S tem JVCKENWOOD izjavlja, da je radijska oprema

» KDC-BT950DAB/KDC-BT450DAB/

KMM-BT407DAB/KMM-DAB307 « v skladu z

Direktivo 2014/53/EU.

Celotno besedilo direktive EU o skladnosti je

dostopno na tem spletnem naslovu:

http://www.kenwood.com/cs/ce/eudoc/

Slovensky

Spoločnosť JVCKENWOOD týmto vyhlasuje, že

rádiové zariadenie „KDC-BT950DAB/

KDC-BT450DAB/KMM-BT407DAB/KMM-DAB307“

vyhovuje smernici 2014/53/EÚ.

Celý text EÚ vyhlásenia o zhode nájdete na

nasledovnej internetovej adrese:

http://www.kenwood.com/cs/ce/eudoc/

Dansk

Herved erklærer JVCKENWOOD, at radioudstyret

“KDC-BT950DAB/KDC-BT450DAB/KMM-BT407DAB/

KMM-DAB307” er i overensstemmelse med

Direktiv 2014/53/EU.

EU-overensstemmelseserklæringens fulde ordlyd

er tilgængelig på følgende internetadresse:

http://www.kenwood.com/cs/ce/eudoc/

Ελληνικά

Με το παρόν, η JVCKENWOOD δηλώνει ότι ο

ραδιοεξοπλισμός «KDC-BT950DAB/

KDC-BT450DAB/KMM-BT407DAB/KMM-DAB307»

συμμορφώνεται με την Οδηγία 2014/53/ΕΕ.

Το πλήρες κείμενο της δήλωσης συμμόρφωσης

της ΕΕ είναι διαθέσιμο στην ακόλουθη διεύθυνση

στο διαδίκτυο:

http://www.kenwood.com/cs/ce/eudoc/

Eesti

Käesolevaga JVCKENWOOD kinnitab, et

„KDC-BT950DAB/KDC-BT450DAB/KMM-BT407DAB/

KMM-DAB307“ raadiovarustus on vastavuses

direktiiviga 2014/53/EL.

ELi vastavusdeklaratsiooni terviktekst on

kättesaadav järgmisel internetiaadressil:

http://www.kenwood.com/cs/ce/eudoc/

Latviešu

JVCKENWOOD ar šo deklarē, ka radio aparatūra

„KDC-BT950DAB/KDC-BT450DAB/KMM-BT407DAB/

KMM-DAB307” atbilst direktīvas 2014/53/ES

prasībām.

Pilns ES atbilstības deklarācijas teksts ir pieejams

šādā tīmekļa adresē:

http://www.kenwood.com/cs/ce/eudoc/

Lietuviškai

Šiuo JVCKENWOOD pažymi, kad radijo įranga

„KDC-BT950DAB/KDC-BT450DAB/KMM-BT407DAB/

KMM-DAB307“ atitinka 2014/53/EB direktyvos

reikalavimus.

Visą EB direktyvos atitikties deklaracijos tekstą

galite rasti šiuo internetiniu adresu:

http://www.kenwood.com/cs/ce/eudoc/

Malti

B’dan, JVCKENWOOD jiddikjara li t-tagħmir tar-

radju “KDC-BT950DAB/KDC-BT450DAB/

KMM-BT407DAB/KMM-DAB307” huwa konformi

mad-Direttiva 2014/53/UE.

It-test kollu tad-dikjarazzjoni ta’ konformità huwa

disponibbli fl-indirizz intranet li ġej:

http://www.kenwood.com/cs/ce/eudoc/

HRVATSKI / SRPSKI JEZIK

JVCKENWOOD ovim izjavljuje da je radio oprema

“KDC-BT950DAB/KDC-BT450DAB/KMM-BT407DAB/

KMM-DAB307” u skladu s Direktivom 2014/53/EU.

Cjeloviti tekst deklaracije Europske unije o

usklađenosti dostupan je na sljedećoj internet

adresi:

http://www.kenwood.com/cs/ce/eudoc/

ROMÂNĂ

Prin prezenta, JVCKENWOOD declară că

echipamentul radio “KDC-BT950DAB/

KDC-BT450DAB/KMM-BT407DAB/KMM-DAB307”

este în conformitate cu Directiva 2014/53/UE.

Textul integral al declarației de conformitate UE

este disponibil la urmatoarea adresă de internet:

http://www.kenwood.com/cs/ce/eudoc/

БЪЛГАРСКИ

С настоящото JVCKENWOOD декларира, че

радиооборудването на “KDC-BT950DAB/

KDC-BT450DAB/KMM-BT407DAB/KMM-DAB307” е

в съответствие с Директива 2014/53/ЕС.

Пълният текст на ЕС декларацията за

съответствие е достъпен на следния интернет

адрес:

http://www.kenwood.com/cs/ce/eudoc/

Turkish

Burada, JVCKENWOOD “KDC-BT950DAB/

KDC-BT450DAB/KMM-BT407DAB/KMM-DAB307”

radyo ekipmanının 2014/53/AB Direktifine uygun

olduğunu bildirir.

AB uyumluluk deklarasyonunun tam metni

aşağıdaki internet adresinde mevcuttur.

http://www.kenwood.com/cs/ce/eudoc/

Русский

JVCKENWOOD настоящим заявляет, что

радиооборудование «KDC-BT950DAB/

KDC-BT450DAB/KMM-BT407DAB/KMM-DAB307»

соответствует Директиве 2014/53/EU.

Полный текст декларации соответствия

ЕС доступен по следующему адресу в сети

Интернет:

http://www.kenwood.com/cs/ce/eudoc/

Українська

Таким чином, компанія JVCKENWOOD заявляє,

що радіообладнання «KDC-BT950DAB/

KDC-BT450DAB/KMM-BT407DAB/KMM-DAB307»

відповідає Директиві 2014/53/EU.

Повний текст декларації про відповідність ЄС

можна знайти в Інтернеті за такою адресою:

http://www.kenwood.com/cs/ce/eudoc/

JS_KWD_QSG_KDC_BT950DAB_EN_C00.indd ivJS_KWD_QSG_KDC_BT950DAB_EN_C00.indd iv 2/6/2020 2:30:01 PM2/6/2020 2:30:01 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

v

SOFTWARE LICENSE AGREEMENT

The software embedded in the Product (hereinafter the "Licensed Software") provided by Licensor is

copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions

which Users shall follow in order to use the Licensed Software.

The User shall use the Licensed Software by agreeing with the terms of this Software License Agreement.

This Agreement shall be deemed completed at the time the User (hereinafter the "User") initially used the

Product in which the "Licensed Software" is embedded.

The Licensed Software may include the software which has been licensed to the Licensor directly or

indirectly from any third party. In such case, some third parties require the Users to follow their conditions

for use separately from this Software License Agreement. Such software shall not be subject to this

Agreement, and the Users are urged to read the "Important Notice concerning the Software" to be provided

separately below.

Article 1 General Provision

The Licensor shall grant to the User a non-exclusive and non-transferable (other than the exceptional case

referred to in Article 3, Paragraph 1) licensed to use the Licensed Software within the country of the User.

(the country where the User bought the Product (hereinafter the "Country")

Article 2 License

1. The license granted under this Agreement shall be the right to use the Licensed Software in the

Product.

2. The User shall not duplicate, copy, modify, add, translate or otherwise alter, or lease the Licensed

Software and any related documents, whether in whole or in part.

3. The use of the Licensed Software shall be limited to personal purpose, and the Licensed Software shall

not be distributed, licensed or sub-licensed whether it is for commercial purpose or not.

4. The User shall use the Licensed Software according to the directions described in the operation

manual or help file, and is prohibited to use or duplicate any data in a manner violating the Copyright

Law or any other laws and regulations by applying whole or a part of the Licensed Software.

Article 3 Conditions for Grant of License

1. When the User transfers the Product, it may also transfer the license to use the Licensed Software

embedded in the Product (including any related materials, updates and upgrades) on condition that

no original, copies or related materials continue in the possession of the User, and that the User shall

cause the transferee to comply with this Software License Agreement.

2. The User shall not carry out reverse engineering, disassembling, decompiling or any other code

analysis works in connection with the Licensed Software.

Article 4 Right pertaining to the Licensed Software

Any and all copyrights and other rights pertaining to the Licensed Software and related documents

shall belong to the Licensor or the original holder of the right who granted to the Licensor the license or

sublicense for the Licensed Software (hereinafter the "Original Rightholder"), and the User shall not be

entitled to any right other than the license granted hereunder, in respect of the Licensed Software and any

related documents.

Article 5 Indemnification of Licensor

1. Neither the Licensor nor the Original Rightholder shall be liable for any damage incurred by the User

or any third party due to the exercise of the license granted to the User under this Agreement, unless

otherwise restricted by law.

2. The Licensor will offer no guarantee for the merchantability, convertibility and consistency with

certain objective of the Licensed Software.

Article 6 Liability to Third Party

If any dispute has arisen with any third party due to an infringement upon a copyright, patent or any

other intellectual property right that was caused by the User's use of the Licensed Software, the User shall

settle such dispute at its own cost and hold the Licensor and the Original Rightholder harmless from any

inconvenience it may cause.

Article 7 Confidentiality

The User shall keep the confidentiality of such portion of the Licensed Software, related documents thereof

or any other information to be granted under this Agreement, as well as the conditions of this Agreement

as has not yet entered the public domain, and shall not disclose or divulge the same to any third party

without approval of the Licensor.

Article 8 Termination

In case the User falls under any of the events described in the following items, the Licensor may

immediately terminate this Agreement or claim that the User compensates for the damage incurred by the

Licensor due to such event:

(1) when the User violated any provision of this Agreement; or

(2) when a petition has been filed against the User for an attachment, provisional attachment,

provisional disposition or any other compulsory execution.

JS_KWD_QSG_KDC_BT950DAB_EN_C00.indd vJS_KWD_QSG_KDC_BT950DAB_EN_C00.indd v 2/6/2020 2:30:01 PM2/6/2020 2:30:01 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

vi

Article 9 Destruction of the Licensed Software

If this Agreement is terminated pursuant to the provision of Article 8, the User shall destroy the Licensed

Software, any related documents and copies thereof within two (2) weeks from such date of termination.

Article 10 Protection of Copyright

1. The copyright and all the other intellectual property rights relating to the Licensed Software

shall belong to the Licensor and the Original Rightholder, and in no event shall they be under the

ownership of the User.

2. The User shall, whenever it uses the Licensed Software, comply with any laws relating to the

copyright and other intellectual property rights.

Article 11 Export Restriction

1. It is prohibited to export the Licensed Software and any related documents outside the country

of the User (including transmission thereof outside the country of the User via Internet of other

communication tools).

2. The User shall understand that the Licensed Software shall be subject to the export restrictions

adopted by the country of User and any other countries.

3. The User shall agree that the software will be subject to any and all applicable international and

domestic laws (including the export control regulation of the country of User and any other countries,

and any restrictions concerning the end-users, the use by end-users and importing countries to be

provided by the country of User and any other countries, and any other governmental authorities).

Article 12 Miscellaneous

1. In the event any part of this Agreement is invalidated by operation of law, the residual provisions

shall continue in force.

2. Matters not stipulated in this Agreement or any ambiguity or question raised in the construction of

this Agreement shall be provided or settled upon good-faith consultation between the Licensor and

the User.

3. The Licensor and the User hereby agree that this Agreement is governed by the laws of Japan, and

any dispute arising from, and relating to the rights and obligations under, this Agreement shall be

submitted to the exclusive jurisdiction of the Tokyo District Court for its first instance.

Important Notice concerning the Software

-jansson

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated

documentation files (the "Software"), to deal in the Software without restriction, including without

limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the

Software, and to permit persons to whom the Software is furnished to do so, subject to the following

conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions

of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING

BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE

AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY

CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,

ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE

SOFTWARE.

-cJSON

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated

documentation files (the "Software"), to deal in the Software without restriction, including without

limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the

Software, and to permit persons to whom the Software is furnished to do so, subject to the following

conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions

of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING

BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE

AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY

CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,

ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE

SOFTWARE.

JS_KWD_QSG_KDC_BT950DAB_EN_C00.indd viJS_KWD_QSG_KDC_BT950DAB_EN_C00.indd vi 2/6/2020 2:30:01 PM2/6/2020 2:30:01 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

vii

-CMP

The MIT License (MIT)

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated

documentation files (the "Software"), to deal in the Software without restriction, including without

limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the

Software, and to permit persons to whom the Software is furnished to do so, subject to the following

conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions

of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING

BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE

AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY

CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,

ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE

SOFTWARE.

nanopb

This software is provided 'as-is', without any express or implied warranty. In no event will the authors be

held liable for any damages arising from the use of this software.

Permission is granted to anyone to use this software for any purpose, including commercial applications,

and to alter it and redistribute it freely, subject to the following restrictions:

1. The origin of this software must not be misrepresented; you must not claim that you wrote

the original software. If you use this software in a product, an acknowledgment in the product

documentation would be appreciated but is not required.

2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the

original software.

3. This notice may not be removed or altered from any source distribution.

sha2

AUTHOR: Aaron D. Gifford - http://www.aarongifford.com/

You may obtain a copy of the license at

https://opensource.org/licenses/BSD-3-Clause

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING

BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE

AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY

CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,

ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE

SOFTWARE.

Posix

Redistribution and use in source and binary forms, with or without modification, are permitted provided

that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the

following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and

the following disclaimer in the documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following

acknowledgement:

This product includes software developed by the University of California, Berkeley and its contributors.

4. Neither the name of the University nor the names of its contributors may be used to endorse or

promote products derived from this software without specific prior written permission.

Developed at SunPro, a Sun Microsystems, Inc. business.

Permission to use, copy, modify, and distribute this software is freely granted, provided that this notice is

preserved.

License to copy and use this software is granted provided that it is identified as the “RSA Data Security, Inc.

MD4 Message-Digest Algorithm” in all material mentioning or referencing this software or this function.

JS_KWD_QSG_KDC_BT950DAB_EN_C00.indd viiJS_KWD_QSG_KDC_BT950DAB_EN_C00.indd vii 2/6/2020 2:30:01 PM2/6/2020 2:30:01 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

viii

Author: Chris G. Demetriou

Permission to use, copy, modify and distribute this software and its documentation is hereby granted,

provided that both the copyright notice and this permission notice appear in all copies of the software,

derivative works or modified versions, and any portions thereof, and that both notices appear in supporting

documentation.

CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS “AS IS” CONDITION. CARNEGIE MELLON

DISCLAIMS ANY LIABILITY OF ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF

THIS SOFTWARE.

Carnegie Mellon requests users of this software to return to

Software Distribution Coordinator or Software.Distribution@

CS.CMU.EDU

School of Computer Science

Carnegie Mellon University

Pittsburgh PA 15213-3890

any improvements or extensions that they make and grant Carnegie the rights to redistribute these

changes.

License is also granted to make and use derivative works provided that such works are identified as

“derived from the RSA Data Security, Inc. MD4 Message-Digest Algorithm” in all material mentioning or

referencing the derived work.

RSA Data Security, Inc. makes no representations concerning either the merchantability of this software or

the suitability of this software for any particular purpose. It is provided “as is” without express or implied

warranty of any kind.

You may redistribute unmodified or modified versions of this source code provided that the above

copyright notice and this and the following conditions are retained.

This software is provided “as is”, and comes with no warranties of any kind. I shall in no event be liable for

anything that happens to anyone/anything when using this software.

These notices must be retained in any copies of any part of this documentation and/or software.

T-Kernel 2.0

This product uses the source code of T-Kernel 2.0 under T-License 2.0 granted by T-Engine Forum

(www.tron.org)

BSD-3-Clause

You may obtain a copy of the license at

https://opensource.org/licenses/BSD-3-Clause

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING

BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,

DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,

OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

LFS Subsystem

You may obtain a copy of the license at

https://directory.fsf.org/wiki/License:BSD-4-Clause

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING

BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,

DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,

OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Accordo2 Player

Apache License

Licensed under the Apache License,

Version 2.0, January 2004(the “License”);

You may obtain a copy of the license at

http://www.apache.org/licenses/LICENSE-2.0

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING

BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,

DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,

OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

JS_KWD_QSG_KDC_BT950DAB_EN_C00.indd viiiJS_KWD_QSG_KDC_BT950DAB_EN_C00.indd viii 2/6/2020 2:30:01 PM2/6/2020 2:30:01 PM

2

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Basic procedure

1 Remove the key from the ignition switch, then disconnect the

terminal of the car battery.

2 Install the DAB antenna. See “Installing the DAB antenna” on

page4.

3 Connect the wires properly. See “Wiring connection” on page3.

4 Install the unit to your car. See the following “Installing the unit

(in-dash mounting)”.

5 Connect the terminal of the car battery.

6 Press B SRC to turn on the power.

7 Detach the faceplate and reset the unit within 5 seconds. See “How to

reset” on page7, 8.

Installing the unit (in-dash mounting)

Dashboard of

your car

Hook on the

top side

Bend the appropriate tabs to hold the

sleeve firmly in place.

Example: /

Installation/Connection

This section is for the professional installer.

For safety’s sake, leave wiring and mounting to professionals. Consult the

car audio dealer.

WARNING

• The unit can only be used with a 12V DC power supply, negative ground.

• Disconnect the battery’s negative terminal before wiring and mounting.

• Do not connect Battery wire (yellow) and Ignition wire (red) to the car

chassis or Ground wire (black) to prevent a short circuit.

• To prevent short circuit:

– Insulate unconnected wires with vinyl tape.

– Be sure to ground this unit to the car’s chassis again after installation.

– Secure the wires with cable clamps and wrap vinyl tape around the

wires that comes into contact with metal parts to protect the wires.

CAUTION

• Install this unit in the console of your vehicle. Do not touch the metal parts

of this unit during and shortly after use of the unit. Metal parts such as the

heat sink and enclosure become hot.

• Do not connect the wires of speakers to the car chassis or Ground wire

(black), or connect them in parallel.

• Mount the unit at an angle of less than 30º.

• If your vehicle wiring harness does not have the ignition terminal, connect

Ignition wire (red) to the terminal on the vehicle’s fuse box which provides

12 V DC power supply and is turned on and off by the ignition key.

• Keep all cables away from heat dissipate metal parts.

• After the unit is installed, check whether the brake lamps, blinkers, wipers,

etc. on the car are working properly.

• If the fuse blows, first make sure the wires are not touching car’s chassis,

then replace the old fuse with one that has the same rating.

JS_KWD_QSG_KDC_BT950DAB_EN_EN00.indd 2JS_KWD_QSG_KDC_BT950DAB_EN_EN00.indd 2 2/6/2020 3:50:21 PM2/6/2020 3:50:21 PM

3

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

REMOTE CONT

STEERING WHEEL

REMOTE INPUT

P. CONT

ANT CONT

MUTE

Antenna terminal

DAB antenna jack

Fuse (10 A)

Wiring connection

Removing the unit

/ : / :

Part list (supplied)

(A) Faceplate (×1)

(B) Trim plate (×1)

(C) Mounting sleeve (×1)

(D) Wiring harness (×1)

(E) Extraction key (×2)

If no connections are made, do not let

the wire come out from the tab.

ISO connectors

a Light blue/yellow: To the steering wheel remote control adapter

b Blue/white: To the power control terminal when using the optional power

amplifier or to the antenna control terminal in the vehicle

c Brown: To connect the Kenwood navigation system, refer your navigation

manual

d Yellow: Battery wire

e Red: Ignition wire

f Red: A7 from ISO connector

g Yellow: A4 from ISO connector

Pin Color and function (for ISO connectors)

A4 Yellow : Battery

A5 Blue/White*1 : Power control

A7 Red : Ignition (ACC)

A8 Black : Earth (ground) connection

B1, B2

Purple ], Purple/black [

: Rear speaker (right)

B3, B4

Gray ], Gray/black [

: Front speaker (right)

B5, B6

White ], White/black [

: Front speaker (left)

B7, B8

Green ], Green/black [

: Rear speaker (left)

NOTE: Total output for Blue/White wire

(*1) + (*2) is 12 V 350 mA

JS_KWD_QSG_KDC_BT950DAB_EN_EN00.indd 3JS_KWD_QSG_KDC_BT950DAB_EN_EN00.indd 3 4/30/2020 8:51:18 AM4/30/2020 8:51:18 AM

4

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Installing the DAB antenna

Connect the DAB antenna to the DAB antenna jack. (Page3)

• DAB antenna is supplied for / /

. For details, see the following pages.

• For , you need to purchase the DAB antenna separately.

For details, refer to the instruction manual supplied with the DAB antenna.

CAUTION

• The film antenna (F) is exclusively for use inside the vehicle.

• Do not install at the following locations:

– where it may block the driver’s view.

– where it may obstruct the operation of safety devices such as air bags.

– on movable glass surfaces such as the rear hatch.

– at side of vehicle (e.g. door, front quarter window).

– on rear window.

• Signal strength will weaken when installed at the following locations:

– on IR reflecting glass or locations covered with mirror type glass film.

– where it overlaps with genuine radio antenna (pattern).

– where it overlaps with window heating wires.

– on glass that blocks radio signals (e.g. IR reflecting glass, thermal

insulation glass).

• Poor reception may occur:

– due to noise when windscreen wiper, air conditioner, or motor is turned

on.

– depending on the direction of the broadcast station with respect to the

vehicle (antenna).

• Thoroughly wipe oil and dirt from the pasting surface with the supplied

cleaner (I).

• Do not bend or damage the film antenna (F).

• It may not be possible to install on certain vehicles.

• Check the cable routing of the film antenna (F) and amplifier unit (G)

before pasting.

• Do not apply any glass cleaner after pasting the film antenna (F).

Part list (supplied)

(F) Film antenna (×1)

(G) Amplifier unit (cable with booster, 3.5m) (×1)

(H) Cable clamper (×3)

(I) Cleaner (×1)

Determine the antenna installation position

• The direction of the film antenna (F) changes depending on whether

the film antenna (F) is installed on the right side or left side.

• Be sure to check the installation location of film antenna (F) before

installing. Film antenna cannot be re-pasted.

• Separate from other antennas by at least 100 mm.

• Do not paste the amplifier unit (G) on the ceramic line (black part)

around the front glass. Because there is not enough adhesion.

Installing the antenna on the left side Installing the antenna on the right side

(F)

(G)

Ceramic line (black part)

Earth sheet*

* Paste the earth sheet of the amplifier unit (G) on the metal part of the

front pillar.

JS_KWD_QSG_KDC_BT950DAB_EN_EN00.indd 4JS_KWD_QSG_KDC_BT950DAB_EN_EN00.indd 4 2/6/2020 3:50:26 PM2/6/2020 3:50:26 PM

5

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

CAUTION

When installing the antenna cable inside the front pillar with the air bag

installed

• The front pillar cover is secured with

a special clip which may need to be

replaced when it is removed.

Contact your vehicle dealer for details

on removing the front pillar cover and

availability of replacement parts.

Front pillar

Clip

• Install the amplifier unit (G) above the

air bag so that it does not obstruct the

operation of the air bag.

(G)

Air bag

Antenna installation

1 Remove the front pillar cover of your car.

Front pillar

2 Clean the windscreen with the supplied cleaner (I).

(I)

– Wait until the glass surface is completely dry before proceeding.

– Warm the surface of the windscreen with defroster if it is cold (during

winter).

3 Remove the separator (tag 1) of film antenna (F) horizontally and

paste the antenna on the windscreen.

Separator (tag 1)

Do not touch the pasting surface (adhesive side) of the film antenna (F).

Installation overview

The antenna should

be installed on the

passenger side for

safety.

JS_KWD_QSG_KDC_BT950DAB_EN_EN00.indd 5JS_KWD_QSG_KDC_BT950DAB_EN_EN00.indd 5 2/6/2020 3:50:26 PM2/6/2020 3:50:26 PM

6

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

4 Rub the film antenna gently onto the

windscreen in the direction of the arrow

shown to allow it to stick firmly.

5 Remove the separator (tag 2) of film

antenna (F) vertically.

Separator (tag 2)

(F)

6 Set the position of the protrusion of the

amplifier unit (G) with the K mark on the

film antenna (F) and paste.

Do not touch the lead terminal or the pasting

surface (adhesive side) of the amplifier unit

(G).

• When installing the antenna on the right

side

Earth sheet

Set the position of

the protrusion with

K

mark

Lead contact of the amplifier unit

(metal part)

Lead terminal of the

film antenna (F)

• When installing the antenna on the left side

(G)

(F)

Earth sheet

7 Remove the film covering the earth sheet

and paste the earth sheet on the metal part

of the vehicle.

Provide sufficient leeway for the earth sheet

so that it does not interfere with the interior

parts (front pillar cover). Also take care that

the interior parts do not interfere with the

amplifier unit (G).

(G)

Windscreen

Earth sheet

Front pillar cover

8 Wire the antenna cables.

Use cable clamper (H) to secure the antenna

to the pillar at several positions.

9 Attach the front pillar cover back to its

original position.

Be sure not to damage the earth sheet and

amplifier unit (G) when covering.

10 Connect the amplifier unit (G) to the DAB

antenna jack on the rear of the unit.

Note:

Make sure

[DAB ANT POWER]

is set to

[ON]

on the

[FUNCTION]

menu in standby mode.

[ON]

is selected initially.

JS_KWD_QSG_KDC_BT950DAB_EN_EN00.indd 6JS_KWD_QSG_KDC_BT950DAB_EN_EN00.indd 6 2/6/2020 3:50:26 PM2/6/2020 3:50:26 PM

7

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Basics

Faceplate

Volume knob

Loading slot

USB input terminal

Lights up when

Bluetooth

connection is

established.

Detach

button

Display window*

Auxiliary input jack

Attach Detach How to reset

Reset the unit

within 5seconds

after detaching the

faceplate.

To On the faceplate

Turn on the power

Press B SRC.

• Press and hold to turn off the power.

Adjust the volume Turn the volume knob.

Select a source

Press B SRC repeatedly.

Change the display information Press DISP repeatedly.

Before Use

IMPORTANT

• To ensure proper use, please read through this Guide before using this

product. It is especially important that you read and observe Warnings and

Cautions in this Guide.

• Please keep the Guide in a safe and accessible place for future reference.

WARNING

Do not operate any function that takes your attention away from safe

driving.

CAUTION

Volume setting:

• Adjust the volume so that you can hear sounds outside the car to prevent

accidents.

• Lower the volume before playing digital sources to avoid damaging the

speakers by the sudden increase of the output level.

General:

• Avoid using the external device if it might hinder safe driving.

• Make sure all important data has been backed up. We shall bear no

responsibility for any loss of recorded data.

• Never put or leave any metallic objects (such as coins or metal tools) inside

the unit to prevent a short circuit.

•

/ : If a disc error occurs due to

condensation on the laser lens, eject the disc and wait for the moisture to

evaporate.

• USB rating is indicated on the main unit. To view, detach the faceplate.

• Depending on the types of cars, the antenna will automatically extend

when you turn on the unit with the antenna control wire connected.

Turn off the unit or change the source to STANDBY when parking at a low

ceiling area.

*

Only for illustration purpose.

JS_KWD_QSG_KDC_BT950DAB_EN_EN00.indd 7JS_KWD_QSG_KDC_BT950DAB_EN_EN00.indd 7 2/6/2020 3:50:27 PM2/6/2020 3:50:27 PM

8

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Getting Started

1

Select the display language, acknowledge the

crossover type and cancel the demonstration

When you turn on the power for the first time (or

[FACTORY RESET]

is set to

[YES]

), the display shows: “SEL LANGUAGE” “PRESS” “VOLUME KNOB”

1 Turn the volume knob to select

[EN]

(English) /

[RU]

(Russian) /

[SP]

(Spanish) /

[FR]

(French) /

[GE]*

(German), then press the knob.

[EN]

is selected for the initial setup.

Then, the display shows: “2-WAY X ’ OVER” or “3-WAY X ’ OVER” “PRESS”

“VOLUME KNOB” “TO CONFIRM”.

2 Press the volume knob to acknowledge the current crossover type.

Then, the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”.

3 Press the volume knob again.

[YES]

is selected for the initial setup.

4 Press the volume knob again.

“DEMO OFF” appears.

*

Only for

.

2

Set the clock and date

1 Press the volume knob to enter

[FUNCTION]

.

2 Turn the volume knob to select

[CLOCK]

, then press the knob.

To adjust the clock

3 Turn the volume knob to select

[CLOCK ADJUST]

, then press the knob.

4 Turn the volume knob to make the settings, then press the knob.

Set the time in the order of “Hour” “Minute”.

5 Turn the volume knob to select

[CLOCK FORMAT]

, then press the knob.

6 Turn the volume knob to select

[12H]

or

[24H]

, then press the knob.

To set the date

7 Turn the volume knob to select

[DATE FORMAT]

, then press the knob.

Faceplate

Volume knob

USB input terminal

Detach

button

Display window*

Auxiliary input jack

Attach Detach How to reset

Reset the unit

within 5seconds

after detaching the

faceplate.

To On the faceplate

Turn on the power

Press B SRC.

• Press and hold to turn off the power.

Adjust the volume Turn the volume knob.

Select a source

Press B SRC repeatedly.

Change the display information Press DISP repeatedly.

*

Only for illustration purpose.

JS_KWD_QSG_KDC_BT950DAB_EN_EN00.indd 8JS_KWD_QSG_KDC_BT950DAB_EN_EN00.indd 8 2/7/2020 4:54:57 PM2/7/2020 4:54:57 PM

9

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

8 Turn the volume knob to select

[DD/MM/YY]

or

[MM/DD/YY]

, then press

the knob.

9 Turn the volume knob to select

[DATE SET]

, then press the knob.

10 Turn the volume knob to make the settings, then press the knob.

Set the date in the order of “Day” “Month” “Year” or “Month” “Day”

“Year”.

11 Press and hold to exit.

To return to the previous setting item, press

.

3

Set the other optional settings

You can only set the following items while the unit is in STANDBY source.

1 Press B SRC repeatedly to enter STANDBY.

2 Press the volume knob to enter

[FUNCTION]

.

3 Turn the volume knob to select an item (see the following table), then

press the knob.

4 Repeat step 3 until the desired item is selected or activated.

5 Press and hold to exit.

To return to the previous setting item, press

.

Default: [XX]

[SYSTEM]

[KEY BEEP]

[ON]: Activates the keypress tone. ; [OFF]: Deactivates.

[FACTORY RESET]

[YES]: Resets the settings to default (except the stored station). ;

[NO]: Cancels.

[ENGLISH]

Select the display language for [FUNCTION] menu and music

information if applicable.

By default, [ENGLISH] is selected.

• [DEUTSCH] is available for only.

[РУССКИЙ]

[ESPANOL]

[FRANCAIS]

[DEUTSCH]

Digital Radio

About DAB (Digital Audio Broadcasting)

DAB is one of the digital radio broadcasting systems available today. It can

deliver digital quality sound without any annoying interference or signal

distortion. Furthermore, it can carry text, pictures and data.

In contrast to FM broadcast, where each program is transmitted on its own

frequency, DAB combines several programs (called “services”) to form one

“ensemble.”

The “primary component” (main radio station) is sometimes accompanied

by a “secondary component” which can contain extra programs or other

information.

Preparation:

1 Connect the DAB antenna (supplied/separately purchased) to the

DAB antenna jack on the rear of the unit.

2 Press B SRC repeatedly to select DIGITAL AUDIO.

3 Press and hold (LIST UPDATE) to start the Service List update.

“UPDATED” appears when update completes.

Search for an ensemble

1 Press B SRC repeatedly to select DIGITAL AUDIO.

2 Press BAND repeatedly to select DB1/DB2/DB3.

3 Press and hold S / T to search for an ensemble.

4 Press S / T to select an ensemble, service or component to listen.

Settings in memory

You can store up to 18 services.

Store a service

Press and hold one of the number buttons (1 to 6).

Select a stored service

Press one of the number buttons (1to6).

JS_KWD_QSG_KDC_BT950DAB_EN_EN00.indd 9JS_KWD_QSG_KDC_BT950DAB_EN_EN00.indd 9 2/6/2020 3:50:27 PM2/6/2020 3:50:27 PM

10

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Analog Radio

Search for a station

1 Press B SRC repeatedly to select RADIO.

2 Press BAND repeatedly to select FM1/FM2/FM3/MW/LW.

3 Press S / T to search for a station.

Settings in memory

You can store up to 18 stations for FM and 6 stations for MW/LW.

Store a station

While listening to a station....

Press and hold one of the number buttons (1 to 6).

Select a stored station

Press one of the number buttons (1to6).

CD/USB/iPod

Selectable source:

: CD/USB/iPod USB or iPod BT

: CD/USB

/ : USB

Start playback

The source changes automatically and playback starts when you load a disc

or attach a device (USB device/ iPod/iPhone) to the USB input terminal.

To On the faceplate

Play back/pause

Press 6IW.

Reverse/Fast-forward Press and hold

.

Select a track/file Press

.

Select a folder Press 2

/ 1 .

Repeat play Press 4

repeatedly.

Random play Press 3

repeatedly.

JS_KWD_QSG_KDC_BT950DAB_EN_EN00.indd 10JS_KWD_QSG_KDC_BT950DAB_EN_EN00.indd 10 2/6/2020 3:50:27 PM2/6/2020 3:50:27 PM

11

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Functions Settings

1 Press the volume knob to enter

[FUNCTION]

.

• For : Press AUD to enter

[AUDIO CONTROL]

directly.

2 Turn the volume knob to select an item, then press the knob.

3 Repeat step 2 until the desired item is selected or activated.

4 Press and hold to exit.

To return to the previous setting item, press

.

• Refer to the INSTRUCTION MANUAL on the following website for the

detailed explanation of each item: <www.kenwood.com/cs/ce/>

• The availability of each item vary depending on the model.

[FUNCTION] menu items

[AUDIO CONTROL]

: Sets your preferred audio settings.

[DISPLAY]

: Sets your preferred control for the display window.

[TUNER SETTING]

: Settings for radio source.

[USB]

: Settings for using a USB device.

[BT MODE]

: Settings for using a Bluetooth device.

[REMOTE APP]

: Settings for using smartphone to control this unit.

[MIC GAIN]*

: Sets the sensitivity of the microphone.

[NR LEVEL]*

: Adjusts the noise reduction level.

[ECHO CANCEL]*

: Adjusts the echo cancellation delay time.

[SYSTEM]

: Settings for this unit.

[CLOCK]

: Adjusts the clock.

[ENGLISH]

: Selects language for the menu and music information.

[РУССКИЙ]

: Selects language for the menu and music information.

[ESPANOL]

: Selects language for the menu and music information.

[FRANCAIS]

: Selects language for the menu and music information.

[DEUTSCH]

: Selects language for the menu and music information.

[DEMO MODE]

: Activates or deactivates the display demonstration.

* Applicable only while talking on the phone.

Examples of some well-used settings

Subwoofer Level Setting

1 Press the volume knob to enter

[FUNCTION]

.

2 Turn the volume knob to select

[AUDIO CONTROL]

, then press the knob.

3 Turn the volume knob to select

[SUBWOOFER SET]

, then press the knob.

4 Turn the volume knob to select

[SW SET ON]

, then press the knob.

5 Turn the volume knob to select

[SUB-W LEVEL]

, then press the knob.

6 Turn the volume knob to adjust the subwoofer level, then press the

knob.

7 Press and hold to exit.

Note:

For / / : You need to set

[SWITCHPREOUT]

to

[SUB-W]

in standby mode before you can make the above

settings.

JS_KWD_QSG_KDC_BT950DAB_EN_EN00.indd 11JS_KWD_QSG_KDC_BT950DAB_EN_EN00.indd 11 4/2/2020 2:23:50 PM4/2/2020 2:23:50 PM

12

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

6 Repeat step 4 and step 5 to set color for other zones.

7 Press and hold to exit.

Other Information

For playback operations of AUX and Spotify sources, refer to the

INSTRUCTION MANUAL on the following website:

<www.kenwood.com/cs/ce/>

• The availability of each source vary depending on the model.

Note for specifications

Bluetooth Frequency Range:

2.402 GHz — 2.480 GHz

Bluetooth RF Output Power (E.I.R.P.):

+4 dBm (MAX), Power Class 2

Speaker Impedance:

4Ω—8Ω

Operating Voltage:

12 V DC car battery

Illumination Color Setting

For

: You can set your preferred illumination color for each

zone.

1 Press the volume knob to enter

[FUNCTION]

.

2 Turn the volume knob to select

[DISPLAY]

, then press the knob.

3 Turn the volume knob to select

[COLOR SELECT]

, then press the knob.

4 Turn the volume knob to select a zone (

[ALL ZONE]

,

[ZONE 1]

,

[ZONE 2]

),

then press the knob.

5 Turn the volume knob to select a color for the selected zone, then

press the knob.

[INITIAL COLOR]/[VARIABLE SCAN]/[CUSTOM R/G/B]/

[RED1]/[RED2]/[RED3]/[PURPLE1]/[PURPLE2]/[PURPLE3]/

[PURPLE4]/[BLUE1]/[BLUE2]/[BLUE3]/[SKYBLUE1]/

[SKYBLUE2]/[LIGHTBLUE]/[AQUA1]/[AQUA2]/[GREEN1]/

[GREEN2]/[GREEN3]/[YELLOWGREEN1]/[YELLOWGREEN2]/

[YELLOW]/[ORANGE1]/[ORANGE2]/[ORANGERED]

JS_KWD_QSG_KDC_BT950DAB_EN_EN00.indd 12JS_KWD_QSG_KDC_BT950DAB_EN_EN00.indd 12 2/6/2020 3:50:28 PM2/6/2020 3:50:28 PM

La pagina sta caricando ...

Kenwood KDC-BT450DAB Manuale utente

Questo manuale è adatto anche per

Kenwood KDC-BT450DAB Manuale utente

in altre lingue

Documenti correlati

Altri documenti