Invacare® Etude
User's Manual (GB)
Brugermanual (DK)
Bruksanvisning (SE)
Gebruiksaanwijzing (NL)
Bedienungsanleitung (DE)
Manual d’utilisation (FR)
Manual del usuario (ES)
Manual de Utilização (PT)
Illustration 1
Basic Classic
Illustration 2 a
Illustration 2 b + c
Basic Classic
Illustration 2 d
Illustration 3
Basic
Classic
Illustration 4
Illustration 5
Illustration 6
A 222 222 228 228
B 97 97 103 103
C 33-73 40-80 30-70 40-80
D 158-198 165-205 155-195 165-205
Basic Classic
Low clasp High clasp
Low pos. High pos.
version version
Illustration 7
Quality Declaration
Congratulations with your new bed Invacare®Etude
TM
from Invacare® EC-Høng A/S.
Your new bed is CE-marked in accordance with directive 93/42/EEC concerning medical
devices.
Invacare®Etude
TM
is developed and constructed with consideration for the user and others
handling or assisting at the bed. Furthermore, the bed is developed in accordance with the
European Standard EN 1970.
Invacare®Etude
TM
is supervised and quality controlled throughout the entire production
process, and the finished bed is inspected by our finished goods control.
Identification label and QA-mark are located on the bed confirming that the finished goods
control has approved the bed.
Please read the entire user’s manual before using the bed.
Invacare®EC-Høng A/S is certified according to ISO 9001 and ISO 13485.
For and on behalf of Invacare®EC-Høng A/S:
R & D Manager
Brian Mundeling
DK KVALITETSDEKLARATION
Tillykke med Deres nye seng Invacare®Etude
TM
fra Invacare® EC-Høng A/S.
Deres nye seng er CE - mærket og lever op til alle krav i henhold til direktiv 93/42/EØF om medicinske anordninger.
Sengen er udviklet og konstrueret under størst mulig hensyntagen til brugeren samt alle andre, der enten håndterer sengen eller hjælper til ved sengen.
Invacare®Etude
TM
er udviklet under hensyntagen til de sikkerhedsmæssige krav i den Europæiske Standard EN 1970. Hver seng har gennem hele produktionsforløbet været overvåget og
kontrolleret, og den færdige seng er blevet inspiceret af vores færdigvarekontrol.
Typeskilt og QA-mærke påsættes sengen som dokumentation for, at færdigvare kontrollen har godkendt sengen. Før ibrugtagning af Deres seng skal De gennemlæse brugermanualen grundigt.
Invacare® EC-Høng A/S er certificeret i henhold til ISO 9001 og ISO 13485.
DE QUALITETSDEKLARATION
Herzlichen Glückwunsch zu Ihrem neuen Pflegebett Invacare®Etude
TM
von Invacare®EC-Høng A/S.
Ihr neuer Pflegebett ist gemäß der Richtlinie 93/42/EWG für Medizinprodukte CE-gekennzeichnet.
Der Invacare®Etude
TM
wurde unter Berücksichtigung der Bedürfnisse von Benutzer und Pflegepersonal entwickelt und in Übereinstimmung mit der Europäischen Norm EN 1970
konzipiert und hergestellt.
Während des gesamten Herstellungsprozesses unterliegt der Invacare®Etude
TM
einer ständigen Qualitätskontrolle und wird im Anschluss nochmals durch unsere Endkontrolle geprüft.
Das Typenschild und QA-Kennzeichen sind am Bett angebracht, um die Abnahme durch unsere Qualitätskontrolle zu bestätigen.
Bitte lesen die gesamte Bedienungsanleitung, bevor Sie den Bett in Gebrauch nehmen.
Invacare® EC-Høng A/S ist zertifiziert nach ISO 9001 und ISO 13485.
NL KWALITEITSGARANTIE
Gefeliciteerd met de aanschaf van uw nieuwe bed Etude
TM
van Invacare® EC- Høng A/S.
Invacare®Etude
TM
is CE - gecertificeerd en goedgekeurd conform richtlijn 93/42/EEC betreffende medische hulpmiddelen.
Invacare®Etude
TM
is ontwikkeld en geconstrueerd met inachtneming van de behoeften van de gebruiker en verzorgers.
Invacare®Etude
TM
is ontwikkeld in overeenstemming met de Europese Standaard EN 1970.
Gedurende het gehele productieproces is het Etude
TM
bed gecontroleerd op kwaliteitsaspecten en het complete bed is na productie zorgvuldig gecontroleerd. Het productlabel en de
QA-markering zijn op het bed bevestigd om aan te tonen dat de bedden zijn gecontroleerd en goed zijn bevonden door de afdeling productcontrole. Wij verzoeken u vriendelijk de gehele
gebruikershandleiding te lezen voordat u het bed in gebruik neemt.
Invacare® EC-Høng A/S is ISO 9001 en ISO 13485 gecertificeerd.
IT DICHIARAZIONE DI QUALITÀ
Complimenti per aver scelto il letto Invacare®Etude
TM
prodotto da Invacare® EC-Høng A/S.
Il vostro nuovo letto è marcato CE - ai sensi della Direttiva 93/42/EEC relativa ai dispositivi medici.
Il letto è stato progettato e costruito con un occhio di riguardo per gli utilizzatori e per i loro assistenti. Invacare®Etude
TM
è stato realizzato nel rispetto della Normativa Europea EN 1970.
Il letto è stato oggetto di accurate verifiche qualitative durante l’intero processo produttivo; una volta completato è stato controllato dal nostro servizio prodotti finiti.
Un’apposita targhetta e la marcatura QA sono state apposte sul letto a conferma dell’avvenuta verifica e accettazione del prodotto da parte del servizio qualità. Prima di utilizzare il letto vi
invitiamo a leggere integralmente il manuale d’uso.
Invacare® EC-Høng A/S è un’azienda certificata ai sensi della Normativa ISO 9001 e ISO 13485.
ES DECLARACIÓN DE CALIDAD
Enhorabuena por su nueva cama Invacare®Etude
TM
de Invacare® EC-Høng A/S.
Su nueva cama cuenta con el marcaje CE - de acuerdo a la directiva 93/42/EOF que hace referencia a los aparatos médicos.
Invacare®Etude
TM
ha sido diseñada y fabricada teniendo en cuenta a los usuarios y las personas que los asisten.
La cama Invacare®Etude
TM
ha sido diseñada de acuerdo a la normativa Europea EN 1970.
El proceso de producción del modelo Invacare®Etude
TM
ha sido supervisado en su totalidad y su calidad inspeccionada, por nuestro control de producto acabado.
La cama cuenta con una placa y marca CE que confirma que la misma ha sido inspeccionada por el control de producto acabado. Por favor lea el manual antes de utilizar la cama.
Invacare EC-Hong A/S es una empresa certificada ISO 9001 e ISO 13485
FR DÉCLARATION DE QUALITÉ
Félicitations! Vous avez choisi votre nouveau lit Invacare®Etude
TM
de Invacare® EC-Høng A/S.
Votre nouveau lit est marqué CE conformément à la directive 93/42/EEC concernant les dispositifs médicaux.
Invacare®Etude
TM
a été développé et construit en considérant systématiquement les besoins de l’utilisateur et des tierces personnes lors de la manipulation du lit ou de son utilisation.
Invacare®Etude
TM
a été développé conformément au Standard Européen NF EN 1970 et NF EN 60601-2-38.
Invacare®Etude
TM
a été supervisé et contrôlé tout au long du process de fabrication et le lit achevé a été inspecté par le contrôle des produits finis. La plaque d’identification et la marque QA
sont placées sur le lit attestant que le contrôle des produits finis a approuvé le lit. Le lit répond aux exigences de l’analyse de risques de la norme NF EN 14971.
Nous vous remercions de lire le Manuel de l’Utilisateur dans son intégralité avant d’utiliser le lit.
Invacare® EC-Høng A/S est certifiée ISO 9001 et ISO 13485.
PT DECLARAÇÃO DE QUALIDADE
Parabéns pela sua nova cama Invacare®Etude
TM
da Invacare® EC-Høng A/S.
A cama tem a marca CE - em conformidade com a directiva 93/42/EEC referente a aparelhos médicos.
A cama foi concebida e desenhada, tendo em consideração o seu utilizador e o seu(s) assistente(s), que o ajudarão a manipular a cama. A cama foi concebida em conformidade com o Standard
Europeu EN 1970.
Durante todo o processo de fabrico e produção, a cama Invacare®Etude
TM
foi supervisionada e a sua qualidade controlada, sendo o produto final inspeccionado e testado pelo nosso controlo
de qualidade. As etiquetas e a marca QA, são colocadas na cama, após a aprovação final da cama, confirmando e garantindo a conformidade com o nosso controlo de qualidade. Por Favor, leia
atentamente este manual de utilizador antes de utilizar a sua cama.
A Invacare
®
EC-Høng A/S está certificada em conformidade com ISO 9001 e ISO 13485.
5
GB
Table of Contents
1. General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2. Unpacking your product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
3. Assembly of Etude
TM
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
4. Fitting the accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
5. Rebuilding from 3-section to 4-section . . . . . . . . . . . . . . . . . . . . . 13
6. Operating the Etude
TM
with 4-section mattress support . . . . . .14
7. Operating the Etude
TM
with 3-section mattress support . . . . . .15
8. Adjustment of leg section (only on 3-sectioned beds) . . . . . . . . . 16
9. Emergency lowering of the backrest and/or thigh section . . . . . . 17
10. Operating the accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
11. Dismantling the Etude
TM
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
12. Using the transport brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
13. Order numbers for accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . .19
14. Cleaning and disinfection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
15. Maintenance and servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
16. Maintenance chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
17. Waste disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
18. Trouble-shooting the electrical system . . . . . . . . . . . . . . . . . . . . . 22
19. Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
20. Technical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
21. Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
6
QA XXX
Congratulations
You have chosen an Invacare®Etude
TM
nursing bed. Etude
TM
is the dismantleable nursing bed from Invacare®
EC-Høng designed especially for home nursing. The Etude
TM
nursing bed provides ease of handling combined with
good functionality.
Invacare®EC-Høng is certified according to DS/EN ISO 9001 / ISO 13485 which ensures that our customers are
always supplied with products of uniform quality.
Throughout the entire production process our materials/products are quality controlled by the operators.
Moreover, a final test is carried out prior to packaging and shipping.
The operator carrying out the final test, which comprises of checking all moveable
parts, motors and castors, issues a QA number on the product thereby
confirming its quality.
If the product does not correspond to the quality demands of Invacare®EC-Høng,
it will be discarded.
If, contrary to our expectations, a problem should arise in connection with the delivered product, please contact
your Invacare®supplier.
Invacare®reserves the right to alter product specifications without prior notice.
Invacare®accepts no liability for any use, change or assembly of the product other than as
stated in this User’s Manual.
Accessories not mentioned in this manual must not be used.
1. General information
• The Etude bed is marked with the CE mark in accordance with directive 93/42/EEC concerning Medical
Apparatus.
• The Etude bed has been tested and approved according to EN 1970:2000.
• The motors and control of the Etude bed have been approved according to
EN 60601:1996-03.
• The Etude bed has been approved and marked with the TÜV mark.
• Beds provided with tilt function cannot be approved according to EN 1970:2000.
• The Etude bed has undergone a risk analysis according to EN 14971.
• The control and motors are protected according to IP 54. The hand control is protected
according to IP 66.
• Max. weight: Etude Basic: 180 kg - Etude Classic: 220 kg.
• Max. patient weight: 145 kg (Etude Basic) - 185 kg (Etude Classic) provided that the weight of the mattress
and the accessories do not exceed 35 kg.
• Standard size of mattress for the Etude Basic is 90x200x12, Etude Classic 90x200x10.
• If the patient height exceeds 2 meters it is recommended to use a mattress support extension.
• The Etude bed has loose cables, which have to be exchanged when damaged.
• The bed is not intended for children under 12 years and psychiatric patients.
• Remove the plug from the mains voltage before moving the bed. The cable must be kept clear off the floor
and the castors during transportation.
• The adjustment area of the mattress support is Basic: 40-80 cm or 33-73 cm, Classic: 40-80 cm
(30-70 cm/Low height version), Classic Extra Low: 19-59 cm.
• Only accessories described in this manual may be mounted on the Etude bed.
• The angle between the lower leg section and horizontal is adjustable from 0º to 15º.
The bed is not intended for use together with MEDICAL ELECTRICAL EQUIPMENT.
It can be dangerous to roll over the mains cable.
Do not bring mains cable into moving parts.
7
GB
Disconnect the plug from the mains before moving the bed.
The cables must be mounted in such a way that they are kept clear off the floor and do not block
the castors.
We recommend to mount the mains cable on the hook for this purpose, see picture below.
The bed must not be used by patients under 12 years of age, or by patients with body size
equivalent to an average 12 years old or smaller.
The bed’s castors must be locked during nursing a patient in bed or when using any positioning
function. The bed must not be transported when occupied.
Adjust the mattress support sections to horizontal position and lower the bed to its lowest
position before moving the bed.
Hold the top of the bed end with both hands while the bed is pushed/pulled.
Any floor obstacle must not be higher than 10 mm.
Note! Adjust the Etude Classic Extra Low to horizontal position and at least 5 cm above the
lowest position before moving the bed.
If the functions of the bed change, check the bed according to the maintenance chart, chapter 16.
All service and maintenance work described in chapters 14, 15 and 16 must only be performed
by personnel who have been instructed and trained by Invacare®.
Because of condense, may the bed not be used before it has gained room temperature.
8
2. Unpacking your product
For a complete bed the following parts must be provided:
(Illustration 1, here shown as a 3 - sectioned bed)
1. Etude
TM
Basic
A) 1 mattress support
If 3 - sectioned = ETUDE.CXXXX.XX (see complete list for specific number)
If 4 - sectioned = ETUDE.EXXXX.XX (see complete list for specific number)
2 mattress handles, hand control and motors are mounted on the mattress support.
B) 1 pair of bed ends = ETUDE.000C1.XX
Optional:
• Pair of siderails (steel)
• Lifting pole
• Support handle(s)
• Mattress support extension (10 or 20 cm)
• Transport fitting
2. Etude
TM
Classic
A) 1 mattress support
If 3 - sectioned = ETUDE.CXXXX.XX (see complete list for specific number)
If 4 - sectioned = ETUDE.EXXXX.XX (see complete list for specific number)
2 mattress handles, hand control and motors are mounted on the mattress support.
B) 2 individual bed ends
If standard = ETUDE.000EI.XX
If low = ETUDE.000F1.XX
Optional:
• Pair of siderails (wood)
• Lifting pole
• Support handle(s)
• Mattress support extension (20 cm)
• Transport fitting
Order numbers for Etude mattress support and bed ends:
3 - Sect 90X200 Std. Mains Cable, Tilt, Not TÜV Approved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ETUDE.CE100.XX
3 - Sect 90X200 Std. Mains Cable, Excl. Tilt, TÜV Approved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ETUDE.CE300.XX
3 - Sect 90X200 UK Mains Cable, Tilt, Not TÜV Approved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ETUDE.CU100.XX
3 - Sect 90X200 UK Mains Cable, Excl.Tilt, TÜV Approved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ETUDE.CU300.XX
3 - Sect 90X200 AU/NZ Mains Cable, Tilt, Not TÜV Approved . . . . . . . . . . . . . . . . . . . . . . . . . . ETUDE.CA100.XX
3 - Sect 90X200 AU/NZ Mains Cable, Excl. Tilt, TÜV Approved . . . . . . . . . . . . . . . . . . . . . . . . . ETUDE.CA300.XX
4 - Sect 90X200 Std. Mains Cable, Tilt, Not TÜV Approved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ETUDE.EE100.XX
4 - Sect 90X200 Std. Mains Cable, Excl. Tilt, TÜV Approved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ETUDE.EE300.XX
4 - Sect 90X200 UK Mains Cable, Tilt, Not TÜV Approved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ETUDE.EU100.XX
4 - Sect 90X200 UK Mains Cable, Excl. Tilt, TÜV Approved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ETUDE.EU300.XX
4 - Sect 90X200 AU/NZ Mains Cable, Tilt, Not TÜV Approved . . . . . . . . . . . . . . . . . . . . . . . . . . . ETUDE.EA100.XX
4 - Sect 90X200 AU/NZ Mains Cable, Excl. Tilt, TÜV Approved . . . . . . . . . . . . . . . . . . . . . . . . . . ETUDE.EA300.XX
4 - Sect 90X200 JPN. Mains Cable/100V, Tilt, Not TÜV Approved . . . . . . . . . . . . . . . . . . . . . . . . . .ETUDE.EJ100.XX
4 - Sect 90X200 JPN. Mains Cable/100V, Excl. Tilt, TÜV Approved . . . . . . . . . . . . . . . . . . . . . . . . . ETUDE.EJ300.XX
9
GB
All the mattress supports can be combined with these 4 available types of bed ends:
BED ENDS BASIC (Ordered and delivered as a pair of bed ends)
ETUDE.000C1.XX 1 PAIR BASIC BED ENDS, 40-80 cm (33-73) cm
BED ENDS CLASSIC (Ordered and delivered as 1 pcs. of bed end)
ETUDE.000E1.XX 1 PCS. CLASSIC BED END, 40-80 cm
ETUDE.000F1.XX 1 PCS. CLASSIC BED END LOW HEIGHT, 30-70 cm
ETUDE.000G1.XX 1 PCS. CLASSIC EXTRA LOW, 19-59 cm
XX is colour code.
For standard light grey (RAL 7032) .21 is to be used for bed ends and .20 for mattress support.
Example:
ETUDE.000E1.21 (1 Etude Classic bed end in light grey)
ETUDE.EE100.20 (1 Etude 4 - sect. mattress support in light grey)
3. Assembly of Etude
TM
(Illustration 2a, 2b+c, 2d)
a) Mattress Support
• Place the two inserts in the head end of the mattress support. The inserts must be mounted in such a way that
one extends further out of the side tube than the other.
• Loosely screw in the two thumb screws.
• Push the foot end of the mattress support onto the two inserts.
• Tighten with two thumb screws.
• Retighten the two thumb screws at the head end of the top frame.
• Turn the two mattress handles of the backrest up.
• Turn the handle of the leg section up.
b) Etude Basic
• Turn the locking rings*) on the bed ends to the position “open“.
• Latch the mattress support to the bed ends and press firmly into position.
• Turn the locking rings to the position “locked“.
c) Etude Classic
• Release the quick locks*) on the bed ends.
• Latch the mattress support to the bed ends and press firmly into position.
• Turn the quick locks to the position “locked“.
*) The locking rings/quick locks ensure that the mattress support is not accidentally lifted clear of the bed ends.
d) Control Box
The control box is latched to the backrest motor.
The control box is provided with a label with symbols showing where to connect the motors’ plugs.
• Backrest motor.
• Thigh section’s motor.
• Bed end.
• Bed end.
• Hand control.
Wiring (Also see the pictures in section 19)
Attention!
In order to prevent the cables from being torn apart when activating the motors it is critical that
you follow the instructions below
10
1)
2)
1) 2)
B
A
C
1. Connect the cables of the bed end motors (head and foot end) directly to the control box.
2. Only 4 - sectioned beds: The plug of the thigh motor must be directed through the opening of the supporter
for the backrest motor and then be connected to the control box.
3. Connect the mains cable to the 230 V plug.
4. Run the motors of the bed ends to their top position.
5. Place the motor cable of the foot end on the hook at the foot end.
6. Run the backrest to its top position.
7. Place the head end motor cables on the 4 hooks at the head end.
8. Fasten the safety clip to the control box.
When working with the foot end, note that there is a risk of getting squeezed during transport since the adjustable
leg section is not firmly locked. Remember to remove the plug from the mains socket when moving the bed.
4. Fitting the accessories
(Illustration 3)
Fitting the siderail, model 5525/5526/5529
The siderail must be mounted with the release system at the head of the bed.
The fork links on the siderail must be mounted according to
the instruction on the siderail.
Tighten the siderail with 2 thumb screws.
Mounting of BRITT II/III/IV (Classic bed ends)
1. Raise the bed about 1/3.
2. Dismount the stop-knobs using the thumb screws (C).
3. Remove protection tape at the locking pins at both
ends of the siderail.
4. Fit one end at a time. Lift the lower wooden bar
and guide the metal bow to the bed end rail (A).
5. Press the locking pin of the siderail with a finger (B).
6. Guide the siderail to the bed end and pull up the wooden
siderail bar, until the locking pin locks with an audible click.
7. Mount the stop-knobs using the thumb screws (C).
There is a risk entrapment on assembly and operation of the siderails.
Fitting the lifting pole
Remove the plug from the lifting pole tube at the head end of the bed where the lifting pole is to be placed.
Insert the lifting pole into the lifting pole tube and fix with the thumb screw.
0 - 6 cm 25 cm or more
11
GB
5. Rebuilding from 3-section to 4-section
Contents:
Motor
Hand control Without tilt, order no: 1443838
Motor cable With tilt, order no: 1443903
Piping pin
Assembly instructions
Mount the motor on the Remove the blind plug.
thigh section.
Connected the motor to Hand control exchange.
the control unit.
12
6. Operating the Etude
TM
with 4-section mattress support
The bed can be equipped with this type of hand control: (Soft Control)
Or with this type of hand control: (HB 70)
Backrest up
Button with the symbol shown
above.
Push the left-hand side of the button.
Backrest down
Button with the symbol shown
above.
Push the right-hand side of the button.
Thigh section up
Button with the symbol shown
above.
Push the left-hand side of the button.
Thigh section udown
Button with the symbol shown
above.
Push the right-hand side of the button.
Height up
Button with the symbol shown
above.
Push the left-hand side of the button.
Height down
Button with the symbol shown
above.
Push the right-hand side of the button.
Height adjustment of the bed UP/DOWN
Sitting position, irrespective of present position
Horizontal mattress support, irrespective of present position
“Out of bed button”- Raises the backrest and brings the thigh section to
horizontal
Raises the thigh section and brings the backrest to horizontal
13
GB
7. Operating the Etude
TM
with 3-section mattress support
The bed can be equipped with this type of hand control: (Soft Control)
Or with this type of hand control: (HB 70)
Backrest up
Button with the symbol shown
above.
Push the left-hand side of the button.
Backrest down
Button with the symbol shown
above.
Push the right-hand side of the button.
Height up
Button with the symbol shown
above.
Push the left-hand side of the button.
Height down
Button with the symbol shown
above.
Push the right-hand side of the button.
Both 3 - and 4 - sectioned beds can be equipped with hand controls that activate the tilt of the mattress support.
The tilt function must only be operated by medically trained persons - otherwise, there is a risk of
injury to the patient´s health.
Hand controls with tilt activating can be ordered from Invacare® - please refer to the section "Order numbers for
accessories".
Height adjustment of the bed UP/DOWN
Horizontal mattress support, irrespective of present position
“Out of bed button”- Raises the backrest and brings the thigh section to
horizontal
14
8. Adjustment of leg section (only on 3-sectioned beds)
Adjustment of leg section
Operate the leg section by lifting the mattress handle.
Up: Lift the mattress handle on the leg section.
Down: Lift the mattress handle on the leg section right up and then lower
the leg section.
If a mattress support extension is used, lift the leg section.
Always leave the bed in the lowest position. Otherwise there is a risk of entrapment due
to accidental lowering of the mattress support. A person under the bed can be seriously injured
during height adjustments.
There is a risk of entrapment between the thigh section and the mattress support when the
thigh section is lowered.
There is a risk of entrapment between the backrest and the cross rail on the head end of
the mattress support. There is also a risk of getting squeezed between the leg section and the
cross rail on the foot end of the mattress support when the backrest/leg section is lowered.
If the bed is equipped with tilt function, please note that the bed must not be used without the
supervision of the nursing staff.
Brakes
(Illustration 4)
Each of the bed’s 4 wheels is provided with brakes for both lengthwise and crosswise locking.
The brake is foot-operated.
Set-off from the castors might under special conditions appear at different types of absorbing floor covering -
including untreated or badly treated floors. In matters of doubt, does Invacare recommended to place a
suitable kind of protection between the castors and the floor.
15
GB
9. Emergency lowering of the backrest and/or thigh section
(Illustration 5)
An emergency release of the mattress support may be necessary in case of e.g. a power or motor failure.
An emergency release of the height adjustment is NOT possible.
• Remove the plug from the mains before emergency release of the mattress support.
• In an emergency the mattress sections are released by pulling out the pipe pin from the motor.
A minimum of 2 persons is required to release a mattress section. Both persons hold the
mattress section in locked position. One of them pulls out the cotter pin.
Both slowly lower the mattress section until it is completely down.
10. Operating the accessories
Operation of siderail, model 5525/5526/5529
(Illustration 6)
Up: Pull the top tube on the siderail towards the end where the release system is placed.
Down: Press the release button down while pulling the top tube away from the release system.
Operation of siderail, model BRITT II/III/IV
The bed end may be equipped to lock the siderail at half height
as well as in the top position. Normally the siderail can only be
locked in top position.
Up: Pull up the top wooden siderail bar, until the locking pin
locks with an audible click.
Down: Lift the top wooden siderail bar and press the two
locking rings together. Lower the siderail.
Raise Release Lower
There is a risk of entrapment when operating the siderails.
Locking pins
16
A B
Adjusting the height of the lifting pole handle
Loosen the cord as shown in fig. A. The lifting handle can now be adjusted
to the desired height. Press the cord together as shown in fig. B and check
that the cord is locked in the cord lock by pulling the handle.
The distance between the lifting pole and the mattress
Etude Basic
Minimum (at 16 cm mattress) 36-59 cm
Maximum (at 10 cm mattress) 42-65 cm
Etude Classic
Minimum (at 16 cm mattress) 40-63 cm
Maximum (at 10 cm mattress) 42-65 cm
Position the lifting pole in such a way that the handle extends inwards across the bed. If the lifting
pole is used while the handle has been turned away from the bed - the bed can tip when the
handle is used.
Fitting the mattress support extension
Disassemble the bed and remove the inserts. Mount the mattress support extension on either head or foot end
and reassemble the bed. (See illustration 2).
Choice of Mattress
When choosing the Etude Basic or Etude Classic, Invacare®recommends the use of mattresses which are 10-12
cm in height with a specific gravity of 35 kg/m³.
When using mattresses over 12 cm in height, Invacare®recommends the use of siderails Scala Decubi and
Scala Medium, to meet Europaen regulations which require a minimum distance of 22 cm from the mattress to the
upper edge of the siderail.
11. Dismantling the Etude
• Dismantle siderails and lifting pole.
• Bring the bed to its lowest position and adjust all mattress support
sections to horizontal position.
• Disconnect the 230 V supply. Roll the cable onto the hook of the head end
of the bed.
• Disconnect all the motor plugs from the motors (do not disconnect the
backrest motor cable - cable 1).
• Dismantle the safety comb from the control by means of a tool, e.g. a
flat headed screwdriver.
• Pull out the cables of the bed end motors.
Only 4 - sectioned: Also pull out the cables of the leg section motors.
• Separate the mattress support from the bed ends.
• Divide the head and foot end of the mattress support.
12. Using the transport brackets
See instructions for use sent separately in the transporter kit boxes.
17
GB
13. Order numbers for accessories
PLEASE NOTE ONLY ETUDE BASIC IS APPLICABLE TO THE UK
General (Etude Basic + Etude Classic)
Lifting pole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50.57600.20
Mattress handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215989-XXXX
Transport fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1423920-7032
Support handle 25x30 cm (1 pcs.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 021964.20
Support handle 25x80 cm (1 pcs.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1417510-7032
Support handle 40x30 cm (1 pcs.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1417511-7032
Support handle 40x50 cm (1 pcs.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 021963.20
Support handle 40x95 cm (1 pcs.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1417512-7032
Backup battery and battery box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1449687-XXXX
HB 70 hand control with tilt function, 3 sectioned . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1423845
HB 70 hand control with tilt function, 4 sectioned . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1423846
Etude Basic
Invacare Scala Basic (folding, 1 pair) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1432784-1015
Invacare Scala Basic (folding, 1 pair) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1432784-0151
Invacare Scala Basic (folding, 1 pair) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1432784-7032
Invacare Scala Basic Plus (folding, 1 pair) (with plastic insert) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1432787-1015
Invacare Scala Basic Plus (folding, 1 pair) (with plastic insert) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1432787-0151
Invacare Scala Basic Plus (folding, 1 pair) (with plastic insert) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1432787-7032
Invacare Scala Medium (folding, 1 pair) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1432781-1015
Invacare Scala Medium (folding, 1 pair) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1432781-0151
Invacare Scala Medium (folding, 1 pair) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1432781-7032
Invacare Scala Decubi (folding, 1 pair) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1432793-1015
Invacare Scala Decubi (folding, 1 pair) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1432793-0151
Invacare Scala Decubi (folding, 1 pair) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1432793-7032
Siderail (folding, 1 pair) (25 mm tube) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50.55250.20/L+R
Extended siderail (folding, 1 pair) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50.55290.20/L+R
Mattress support extension - 10 cm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1423993-7032
Mattress support extension - 20 cm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1423994-7032
I.V. Drip Rod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50.60030.XX
Black holder for I.V. drop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50.60910.00
Fitting for I.V. drop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50.59570.XX
Holder for hand control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1427870-XXXX
Etude Classic (Not applicable to the UK)
Wooden siderail Britt III (pair) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 020434.01
Wooden siderail Britt IV (pair) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1427875-0101
Extended wooden siderail Britt II (pair) +20 cm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 019376.01
Mattress support extension - 20 cm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1423994-7032
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
Invacare Etude Classic Manuale utente
- Tipo
- Manuale utente
- Questo manuale è adatto anche per
in altre lingue
- English: Invacare Etude Classic User manual
Documenti correlati
-
Invacare Etude Duo Manuale utente
-
-
-
-
-
-
-
-
-