INTEK HT-174S/SCR Manuale del proprietario
- Categoria
- Radio a due vie
- Tipo
- Manuale del proprietario
Questo manuale è adatto anche per
INSTRUCTION MANUAL
MANUALE DI ISTRUZIONI
PROFESSIONAL 2-WAY RADIO
PC PROGRAMMABLE
PMR446 / 16 CHANNEL
HT-446S
HT-446S/SCR
Declaration of Conformity
With the present declaration, we certify that the following products :
INTEK HT-446S
INTEK HT-446S/SCR
comply with all the technical regulations applicable to the above mentioned products
in accordance with the EC Directives 2006/95/EC, 2004/108/EC, 99/5/EC.
Type of product : PMR 446 UHF Transceiver
Details of applied standards : EN 300 296-2, EN 301 489-1/-5,
EN 60065
Manufacturer : INTEK S.R.L.
Via G. Marconi, 16
20090 Segrate, Italy
Tel. 39-02-26950451 / Fax. 39-02-26952185
E-mail : [email protected]
Contact Reference : Armando Zanni
Tel. 39-02-26950451 / Fax. 39-02-26952185
E-mail : [email protected]
Segrate, 02/10/2008 dr. Vittorio Zanetti
(General Manager)
DECLARATION OF CONFORMITY
EC Certificate of Conformity
(to EC Directive 2006/95, 2004/108, 99/5)
NOTICE !
It is recommended to carefully read this owner’s manual before using the product. This will also help the user to
prevent using the radio in violation of the regulations valid in the country where the product is used, as well as to
avoid any possible interferences with other services.
RoHS
2002/95/EC
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Unpacking and checking parts - Supplied accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Preliminary Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
Getting acquainted with the product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9
Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Menu Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-12
Automatic Channel Scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Advanced Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-15
Specifications - Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Frequency / Channels Programming - User Information . . . . . . . . . . . . . . . . . . . . . . . . 17
Index - Notice
- 1 -
English
NOTICE !
This transceiver is programmable via PC, using the dedicated software and the PC interface
cable (optional items). Any programming or modification of the original default setting must be
made by a specialised technician or by an authorised service centre. Some functions of this
transceiver might be programmed in violation of the technical rules in force for the use of the
PMR-446 band. It is the user’s responsibility to check that any modification to the programming
will be done in compliance with the current regulations. Any modification to the product,
alteration of the internal circuit, of the external structure of the radio or any programming in
violation of the current regulations will automatically void the product certification and your right
to use the product. INTEK S.R.L. declines any responsibility concerning any modification of the
product, made by the user or by a third party, after delivery of the product.
NOTICE !
This transceiver has been factory programmed, in order to use the product immediately after
purchase. The programming includes the activation of channels/frequencies in the PMR-446
band, according to the technical rules in force for the use of this band. Please refer to the table
at page 17 for details.
Thank you !
Thank you for choosing INTEK for your two-way business radios applications. This user friendly
transceiver will provide you with clear and reliable communications and will keep your professional
activities at peak efficiency. This transceiver incorporates the latest and most advanced technology, so
you will be pleased with its quality and its technical features.
Important notice !
The use of PMR-446 transceivers is subject to the regulations applied in the country where the product
has to be used. As regulations are usually subject to possible modifications, please check the current
regulations in your country with your dealer or local supplier. INTEK does not take any responsibility for
illegal use and operation of this product not in accordance with the regulation of the country where the
product is used.
Safety notice
The user must know and understand the common risks related to the use of transceivers. Do not use
the transceiver in environments at risk of explosion (where there are gas, dusts, smokes, etc.). Do not
use the transceiver in service areas or fuel stations, on board aircrafts, etc.
Cautions
Please observe the following precautions, in order to avoid causing fire, personal injuries or damage to
the radio:
It is suggested that each transmitted message lasts a few minutes only, since very long
transmissions at the maximum transmitter RF output power may overheat the transmitter.
Do not alter or modify in any way your transceiver.
Do not expose the transceiver for a long time to direct sunlight and do not place it close to
heat sources.
Do not expose the transceiver to excessively dusty or damp places, do not place it on
unstable surfaces.
In case of anomalous smell or smoke that leaks out from the transceiver, turn it off immediately
and remove the battery pack. Please contact an authorised service center.
Please do not dispose off used battery with common garbage. Please use the dedicated
disposal containers.
- 2 -
General Information
English
Unpacking and Checking Parts - Supplied Accessories
- 3 -
Unpacking and checking parts
Carefully unpack the product. Please identify all the parts listed below, before wasting the packaging. If
any part is missing or if the packaging shows any damage, please contact your dealer immediately.
Supplied accessories
7.4V 1200mAh Li-Ion Rechargeable Battery Pack
Electronic Quick Desk Charger
Belt Clip
Speaker-microphone Jack Cover
User Manual
English
Quick Desk Charger Li-Ion Battery Pack
Belt Clip Speaker-microphone
Jack Cover
User Manual
Preliminary Steps
- 4 -
Battery charging
Connect the 230VAC adaptor charger to the desk type battery charger
and to a 230VAC outlet. The Red Led will flash to confirm that the charger
is powered.
Insert the empty battery or the transceiver with the battery pack in the
battery charger. Please make sure that the charging contacts of the radio
are connected with the charging contacts of the charger cradle. The Red
Led will light then the device is ready to begin the charging process. The
charging time depends on the battery condition and capacity. When the
charging process has finished, the Led lights in Green color. Remove the
battery pack or the transceiver from the battery charger and disconnect it
from the AC outlet.
Warning !
The battery is supplied empty and it has to be fully recharged before use.
Some complete cycles of charge/discharge will be necessary in order for the battery to reach a
peak efficiency level.
Please do not charge the battery again when it has just been charged. Otherwise, you may
damage the battery or reduce its life.
The battery charger does not switch OFF automatically when charging is complete, therefore
please remove battery or radio from the charger cradle and disconnect it from the AC outlet.
Do not recharge battery for more than 8 hours, in order to avoid battery overheating.
To install the battery
Place the battery pack on the radio as showed in the drawing (item 1).
Push the battery pack forward (item 2) until it is locked on the radio
(item 3).
1
2
3
English
To remove the battery
To remove the battery pack, press the battery lock on the radio (item 1) and
push back the battery pack, as showed in the drawing (item 2).
Warning !
Please do not waste used batteries into the environment and do not trash them with the common
garbage. Please use the dedicated case for the collection of used up batteries at your supplier.
Do not attempt to open or remove the battery casing.
Do not short the battery terminals or throw the used batteries into fire.
To install / to remove the belt clip
If necessary, attach the belt clip to the tranceiver, making it slide along the
fit runner placed on the rear side of the battery untill the lock will hook. To
remove the belt clip press the lock and slide the belt clip away from
the battery.
Preliminary Steps
- 5 -
2
1
English
- 6 -
Preliminary Steps
English
Install the external earset-microphone jack rubber cover.
If an external earset-microphone is not used, please install the earset-
microphone jack rubber cover.
Install the earset-microphone jack rubber cover as showed on the
drawing. FIx the cover with the supplied screw.
If the earset-microphone jack rubber cover is removed, radio will not
be splash proof.
To install the external microphone (optional)
To install the external microphone, remove the protection cover of the
external microphone/speaker jack. This cover ensures the watertight
integrity of the transceiver (spray-guard) that will not be ensured after
its removing. Insert the connector of the external microphone into the
right jack.
In order to avoid mulfunction or damage to the transceiver, use only
original microphones. Using non original accessories will
authomatically void the warranty.
Warning !
If an external earset-microphone is used, radio will not be splash proof.
Getting Acquainted with the Product
- 7 -
English
GETTING ACQUAINTED WITH THE PRODUCT
1. Antenna
Fixed non removable rubber flexible antenna.
2. Power ON switch and volume control
Switch on the transceiver turning the knob clockwise or counterclockwise to switch it off.
To increase the volume, turn the knob clockwise or counterclockwise to decrease it.
3. RX/TX LED Indicator
The LED indicator will light in green colour when the radio is receiving a signal and in red colour
during transmission.
4. Speaker
Built-in speaker.
5. LCD Display
Backlighted Dot Matrix LCD Display, provides clear reading and full information on every function
and status of the radio
6. Confirm Key
Press this key to confirm the Menu selections and exit to Stand-by mode.
7. UP/DOWN Keys
Channels and menu operation selection keys.
8. FUN Key
Function key to enter the Menu mode and access several functions of the radio.
1
8
9
2
4
5
6
7
3
10
11
12
13
14
15
- 8 -
Getting Acquainted with the Product
9. Microphone
Built-in microphone.
10. Emergency Alarm Key
Press this key to transmit an Emergency Alarm tone. Press the PTT key (11) to close up the alarm.
11. PTT key (Push-To-Talk)
To transmit, press and keep pressed the PTT key (11), then speak into the microphone (9) with
your normal voice. To receive release the PTT key (11).
12. LAMP Key
Rubber key to switch ON and OFF the LCD and keypad backlight function.
13. MONITOR Key
Press this key to open the Squelch, in order to hear the background noise and release it to close
the Squelch.
14. External earset-microphone jack rubber cover
This cover protects the external earset-microphone jack and makes the radio splash proof.
15. Desktop Charger Contacts
A. ANI Icon
The ANI Icon (A) is lighted when the ANI (Identification Number) function is enables. Please refer
to IDENTIFICATION NUMBER SETUP at page 15.
B. Keypad Lock Icon
The Lock icon (B) is lighted when the keypad lock function has been enabled. Please refer to
KEYBOARD LOCK SETUP at page 11.
C. CTS Icon
The CTS Icon (C) is lighted when the CTCSS function is enabled. Please refer to TONE
SQUELCH function at page 13-14.
English
A CB E GF HD
QR P OST
I
L
N
M
U
LCD DISPLAY
- 9 -
Getting Acquainted with the Product
English
D. DCS Icon
The DCS Icon (D) is lighted when the DCS function is enabled. Please refer to TONE SQUELCH
function at page 13-14.
E. SCR Icon (only model HT-446S/SCR)
The SCR Icon (E) is lighted when the Scrambler function is enabled. This function is available
only in model HT-446S/SCR and it may be enabled with the optional PC programming kit.
Before enabling this function, please make sure that local regulations allow the use of this
device.
F.
+ -
Icons
Not available on this model.
G. R Icon
Not available on this model.
H. S Icon
The S Icon (H) is lighted when the Power Save function is enabled. Please refer to POWER SAVE
SETUP at page 14.
I. Battery Level Indicator
It shows the current battery level condition.
L. Numerical Indication
It shows the selected Channel Number and the function number in the Menu Mode.
M. Narrow Band Icon
This icon shows the 12.5KHz channel spacing and it cannot be modified by user.
N. VOX Icon
The VOX icon is lighted when the VOX function has been enabled. Please refer to VOX LEVEL
SETUP at page 12.
O. Channel Scanning Icon
This Icon is lighed when the selected channel is programmed to the scanning list. Please refer to
CHANNEL SCANNING ADDITION/DELETION at page 11.
P. Frequency Reading (25-5-75).
The frequency reading is available only in Memory Mode. Please refer to MODE function at page 13.
Q. RF Digital Meter
It indicates the transmitter RF output power.
R. Dot Matrix Indication
It provides full information on channel and all enabled functions.
S. H Icon
Not available on this model.
T. L Icon
It shows the 0.5W RF output power and it cannot be modified by user.
U. Signal Digital Bar Meter
Indicates the received signal strenght in the receive mode.
- 10 -
Getting Started - Menu Operation
English
GETTING STARTED
Power ON
Switch on the transceiver turning the Power/Volume knob (2) clockwise until you hear a click, the
transceiver now is in stand-by mode.
Volume adjustment
To adjust the volume, turn the volume knob (2) while using the MONITOR key (13) to listen to the
background noise of the channels.
Channel selection
Select the desired channel, using the UP/DOWN keys (7).
Transmission
In order to transmit, press the PTT key (11) and speak with your normal voice, keeping the microphone
at about 4 cm from your mouth. The LED indicator (3) will light in red color. Release the PTT (11) key at
the end of transmission.
Receiving
Release the PTT (11) key and properly adjusting volume, you will be able to receive the incoming signals.
When receiving a signal, the LED indicator (13) will light in green colour.
MENU OPERATION
In stand-by status, press FUN key (8) to enter the menu. The numeric indication (L) will show the
selected menu item.
Press the UP/DOWN (7) keys to choose menu items and press the Confirm Key (6) to confirm the
selections and exit to Stand-by mode.
1. Menu function sequence
SQL (Squelch setup) ---> LED (backlight setup) ---> BEP (keypad tone ON/OFF) ---> SCN (channel
scanning add or remove) ---> KY (keypad lock setup) ---> VOX (VOX sensitivity setup) ---> NAM
(channel naming ON/OFF).
2. Key Function in the Menu Mode
FUN Key (8) : enter the menu mode
UP/DOWN Keys (7) : choose menu items
CONFIRM Key (6) : confirm item choice or parameter and exit to Stand-by mode
SQL : Squelch Level Setup
In stand-by status, press the FUN Key (8) to enter the menu mode. The SQL indication (R) and the Menu
item number (L) will appear on the LCD display (5). Press the FUN key (8) to enter the Squelch setup. The
Squelch level will flash on the LCD display. Press the UP/DOWN keys (7) to choose the desired squelch
level from 00 (Squelch opening) to 09. If level 00 is selected, Squelch will be open and you will hear the
background noise. Press the CONFIRM Key (6) to confirm the selection and exit to Stand-by mode or
press the FUN Key (8) to confirm and return to the Menu selection.
Menu Operation
- 11 -
English
LED : Backlight Setup
In stand-by status, press the FUN Key (8) to enter the menu mode. The SQL indication and the Menu item
1 (L) will appear on the LCD display (5). Press the UP/DOWN (7) keys several times until the LED
indication (R) and the Menu item 2 (L) appear on the LCD display. Press the FUN key (8) to enter the LED
setup. The LED selected option (AUT, ON or OFF) will flash on the LCD display. Press the UP/DOWN
keys (7) to choose the desired option as follow :
AUT : When this option is selected, the LCD display backlight will be turned on once you press a key.
ON : When this option is chosen, the LCD display backlight will be turned ON automatically.
OFF : When this option is chosen, the LCD display backlight will be turned OFF automatically.
Press the CONFIRM Key (6) to confirm the selection and exit to Stand-by mode or press the FUN Key (8)
to confirm and return to the Menu selection.
However you can turn ON or OFF the LCD backlight anytime, by pressing the LAMP key (12).
BEP : Keypad Tone Setup
When a key is pressed, a beep tone is heard to confirm your command. The user may enable or disable
this keypad program tone. In stand-by status, press the FUN Key (8) to enter the menu mode. The SQL
indication and the Menu item 1 (L) will appear on the LCD display (5). Press the UP/DOWN (7) keys
several times until the BEP indication (R) and the Menu item 3 (L) appear on the LCD display. Press the
FUN key (8) to enter the BEP setup. Press the UP/DOWN keys (7) to select ON (Keypad tone enabled) or
OFF (Keypad tone disabled). Press the CONFIRM Key (6) to confirm the selection and exit to Stand-by
mode or press the FUN Key (8) to confirm and return to the Menu selection.
SCN : Channel Scanning ADDITION / DELETION Setup
Select the channel to be added to the scanning list, using the UP/DOWN keys (7). In stand-by status,
press the FUN Key (8) to enter the menu mode. The SQL indication and the Menu item 1 (L) will appear
on the LCD display (5). Press the UP/DOWN (7) keys several times until the SCNADD (or SCNDEL)
indication (R) and the Menu item 4 (L) appear on the LCD display. Press the FUN key (8) to enter the SCN
setup. Press the UP/DOWN keys (7) keys to choose the following options :
ADD : the selected channel will be added to the scanning list; the Channel Scanning Icon (O) will appear on
the LCD display (5).
DEL : the selected channel will be removed from the scanning list; the Channel Scanning Icon (O) will
disappear from the LCD display (5).
Press the CONFIRM Key (6) to confirm the selection and exit to Stand-by mode or press the FUN Key (8)
to confirm and return to the Menu selection.
KY : Keypad Lock setup
In stand-by status, press the FUN Key (8) to enter the menu mode. The SQL indication and the Menu item
1 (L) will appear on the LCD display (5). Press the UP/DOWN (7) keys several times until the KY
indication (R) and the Menu item 5 (L) appear on the LCD display. Press the FUN key (5) to enter the KY
setup. Press the UP/DOWN keys (7) keys to choose the following options :
AUTO : Automatic Locking. When this option is chosen, the keyboard will be locked automatically when
no operation is performed for about 30 seconds.
MANU : Manual Locking. When this option is chosen, the keyboard cannot be locked automatically.
Press and hold the FUN Key (8) for about 2 seconds to lock or unlock the keypad.
If the Keypad lock function is enabled, the keylock icon (B) appears on the LCD display (5).
Press the CONFIRM Key (6) to confirm the selection and exit to Stand-by mode or press the FUN Key (8)
to confirm and return to the Menu selection.
VOX : VOX Level Setup
Your radio is equipped with a user selectable Voice Operated Transmitter function (VOX), that is used
for automatic voice transmission. In this mode, transmission is automatically initiated by speaking into
the microphone (9) and there is no need to push the PTT key (11).
In stand-by status, press the FUN Key (8) to enter the menu mode. The SQL indication and the Menu item
1 (L) will appear on the LCD display (5). Press the UP/DOWN (7) keys several times until the VOX
indication (R) and the Menu item 7 (L) appear on the LCD display. Press the FUN key (8) to enter the VOX
setup. Press the UP/DOWN keys (7) keys to select the desired VOX sensitivity level (from 01 to 09). The
VOX level 09 indicates the highest VOX sensitivity.
Press the CONFIRM Key (6) to confirm the selection and exit to Stand-by mode or press the FUN Key (8)
to confirm and return to the Menu selection.
If the VOX function is enabled, the VOX icon (N) appears on the LCD display (5).
To disable the VOX function, repeat the above procedure and select OFF in the VOX sensitivity level
selection.
NAM : Channel Name ON/OFF
The Channel Naming function allows to assign an alphanumeric name to each channel. The channel
name can be edited only if the Channel Naming function (NAME ?) is enabled with optional
programming kit and it can have up to 6 digits. Please refer to CHANNEL NAMING SETUP at page 15.
The user may enable or disable the NAM function, by proceeding as follow :
in stand-by status, press the FUN Key (8) to enter the menu mode. The SQL indication and the Menu item
1 (L) will appear on the LCD display (5). Press the UP/DOWN (7) keys several times until the NAM
indication (R) and the Menu item 8 (L) appear on the LCD display. Press the FUN key (8) to enter the
NAM setup. Press the UP/DOWN keys (7) keys to select ON (function enabled) or OFF (function disabled).
Press the CONFIRM Key (6) to confirm the selection and exit to Stand-by mode or press the FUN Key (8)
to confirm and return to the Menu selection.
If the NAM function is enabled, the channel name will appear on the LCD display. Otherwise on the LCD
will appear the indication CH- and the selected channel number.
AUTOMATIC CHANNEL SCANNING
To start the Automatic Channel SCAN, press the FUN key (8) and the MONITOR key (13). SCAN will
automatically stop when a signal is detected on one channel, in order to listen to the communication and
SCAN will re-start when no more signal is detected on that channel for a few seconds.
During the scanning process, press the UP/DOWN keys (7) to choose the SCAN direction.
To stop the SCAN function press the PTT (11) or FUN (8) keys.
Menu Operation - Automatic Channel Scanning
- 12 -
English
- 13 -
Advanced Functions
ADVANCED FUNCTIONS
These additional functions may be enabled only by using the optional programming kit.
SCR : SCRAMBLER Function (only model HT-446S/SCR)
You can enjoy privacy of communication within your group, by enabling the SCRAMBLER function.
To enable the SCRAMBLER function please proceed as follows :
In stand-by status, press the FUN Key (8) to enter the menu mode. The SQL indication and the Menu item
1 (L) will appear on the LCD display (5). Press the UP/DOWN (7) keys several times until the SCR
indication (R) and the Menu item 6 (L) appear on the LCD display. Press the FUN key (8) to enter the SCR
setup. Press the UP/DOWN keys (7) to select ON (Scrambler function enabled) or OFF (Scrambler
function disabled). Press the CONFIRM Key (6) to confirm the selection and exit to Stand-by mode or
press the FUN Key (8) to confirm and return to the Menu selection. If the SCRAMBLER function is
enabled, the SCR icon (E) appears on the LCD display.
WARNING ! This function is available only in model HT-446S/SCR and it may be enabled with the
optional PC programming kit.
Before enabling this function, please make sure that local regulations allow the use of this device.
MODE : Channel / Memory Mode Switch
In stand-by status, press the FUN Key (8) to enter the menu mode. The SQL indication and the Menu item
1 (L) will appear on the LCD display (5). Press the UP/DOWN (7) keys several times until the MODE
indication (R) and the Menu item 10 (L) appear on the LCD display. Press the FUN key (8) to enter the
MODE setup. Press the UP/DOWN keys (7) to select CH (Channel mode) or MR (Memory Mode). Press
the CONFIRM Key (6) to confirm the selection and exit to Stand-by mode or press the FUN Key (8) to
confirm and return to the Menu selection.
CH : Channel Mode / Channel Naming
MR : Memory Mode / Full frequency readout
Tone Squelch Function (CTCSS) / (DCS)
Any channel may be associated to a programmed private protection CTCSS/DCS tone. A CTCSS/DCS
tone is a sub audible tone which allows to cut off and therefore not to listen to signals transmitted from
other users on the same operating channel.
When you receive a signal which has a tone different from the one which has been programmed on
your radio, you will not listen to this signal. For the same reason, your outgoing messages can only be
received by other radios which have the same tone as yours on that channel.
Note : Even if the use of a CTCSS/DCS tone will protect you from receiving unwanted signals, the
privacy of your transmissions is not guaranteed.
R : CTCSS / DCS RECEIVER SETUP
In stand-by status, press the FUN Key (8) to enter the menu mode. The SQL indication and the Menu item
1 (L) will appear on the LCD display (5). Press the UP/DOWN (7) keys several times until the R indication
(R) and the Menu item 11 (L) appear on the LCD display. Press the FUN key (8) to enter the setup. Press
the MONITOR Key (13) to switch between the CTCSS tone selection and DCS tone selection. In the DCS
tone selection, the LCD display will show the indication RD and the DCS tone number. Press the
UP/DOWN keys (7) keys to select the desired CTCSS / DCS Tone number or select OFF to disable the
function. Press the CONFIRM Key (6) to confirm the selection and exit to Stand-by mode or press the
FUN Key (8) to confirm and return to the Menu selection. In receiving mode, if the CTCSS / DCS functions
are enabled, the CTCSS Icon (C) or DCS Icon (D) will appear on the LCD display (5).
English
- 14 -
Advanced Functions
T : CTCSS / DCS TRANSMITTER SETUP
In stand-by status, press the FUN Key (8) to enter the menu mode. The SQL indication and the Menu item
1 (L) will appear on the LCD display (5). Press the UP/DOWN (7) keys several times until the T indication
(R) and the Menu item 12 (L) appear on the LCD display. Press the FUN key (8) to enter the T setup.
Press the MONITOR Key (13) to switch between the CTCSS tone selection and DCS tone selection.
In the DCS tone selection, the LCD display will show the indication TD and the DCS tone number. Press
the UP/DOWN keys (7) keys to select the desired CTCSS / DCS Tone number or select OFF to disable the
function. Press the CONFIRM Key (6) to confirm the selection and exit to Stand-by mode or press the
FUN Key (8) to confirm and return to the Menu selection. In transmitting mode, if the CTCSS / DCS
functions are enabled, the CTCSS Icon (C) or DCS Icon (D) will appear on the LCD display (5).
C : CTCSS / DCS SETUP (RECEIVING AND TRANSMITTING MODES)
In stand-by status, press the FUN Key (8) to enter the menu mode. The SQL indication and the Menu item
1 (L) will appear on the LCD display (5). Press the UP/DOWN (7) keys several times until the C indication
(R) and the Menu item 13 (L) appear on the LCD display. Press the FUN key (8) to enter the C setup.
Press the MONITOR Key (13) to switch between the CTCSS tone selection and DCS tone selection. In the
DCS tone selection, the LCD display will show the indication RD and the DCS tone number. Press the
UP/DOWN keys (7) keys to select the desired CTCSS / DCS Tone number or select OFF to disable the
function. Press the CONFIRM Key (6) to confirm the selection and exit to Stand-by mode or press the
FUN Key (8) to confirm and return to the Menu selection. If the CTCSS / DCS functions are enabled, the
CTCSS Icon (C) or DCS Icon (D) will appear on the LCD display (5).
SAV : Power Save Setup
This function reduces the battery consumption when no signal is received or when no operation is
performed (it means when no key is pressed, no switch is turned on/off). The user may enable or disable
this function.
In stand-by status, press the FUN Key (8) to enter the menu mode. The SQL indication and the Menu item
1 (L) will appear on the LCD display (5). Press the UP/DOWN (7) keys several times until the SAV
indication (R) and the Menu item 14 (L) appear on the LCD display. Press the FUN key (8) to enter the
SAV setup. Press the UP/DOWN keys (7) to select ON (Power Save enabled) or OFF (Power Save
disabled). Press the CONFIRM Key (6) to confirm the selection and exit to Stand-by mode or press the
FUN Key (8) to confirm and return to the Menu selection.
SCAN : Automatic Scanning Setup
In stand-by status, press the FUN Key (8) to enter the menu mode. The SQL indication and the Menu item
1 (L) will appear on the LCD display (5). Press the UP/DOWN (7) keys several times until the SCAN
indication (R) and the Menu item 15 (L) appear on the LCD display. Press the FUN key (8) to enter the
SCN setup. Press the UP/DOWN keys (7) to select CO (Carrier Scan) or TO (Time Scan). Press the
CONFIRM Key (6) to confirm the selection and exit to Stand-by mode or press the FUN Key (8) to confirm
and return to the Menu selection.
To start the Automatic Channel SCAN, press the FUN key (8) and the MONITOR key (13).
CO (Carrier Scan) : If this option is selected, SCAN will automatically stop when a signal is detected on
one channel, in order to listen to the communication and SCAN will re-start when no more signal is
detected on that channel for a few seconds.
TO (Time Scan) : If this option is selected, SCAN will automatically stop when a signal is detected on one
channel, and re-start automatically after a few seconds.
English
- 15 -
Advanced Functions
During the scanning process, press the UP/DOWN keys (7) to chosose the SCAN direction.
To stop the SCAN function press the PTT (11) or FUN (8) keys.
TOT : Time-Out-Timer Setup
This function has two purposes :
1. to allow, after a set time, to listen to other urgent calls.
2. avoid to transmit for an endless time, in order to prevent overheating or damage to the
transceiver. After a programmable time of 30-240 seconds of uninterrupted transmission, the
transceiver automatically stops the transmission emitting a warning tone (pre-set function). To stop the
warning tone, release the PTT key (11). To restart the transmission, press again the PTT key (11).
To set up this function, in stand-by status, press the FUN Key (8) to enter the menu mode. The SQL
indication and the Menu item 1 (L) will appear on the LCD display (5). Press the UP/DOWN (7) keys
several times until the TOT indication (R) and the Menu item 16 (L) appear on the LCD display. Press the
FUN key (8) to enter the TOT setup. Press the UP/DOWN keys (7) to select the desired time from 30 to
240 seconds or select OFF to disable the function. Press the CONFIRM Key (6) to confirm the selection
and exit to Stand-by mode or press the FUN Key (8) to confirm and return to the Menu selection.
ANI : Identification Number Setup
In stand-by status, press the FUN Key (8) to enter the menu mode. The SQL indication and the Menu item
1 (L) will appear on the LCD display (5). Press the UP/DOWN (7) keys several times until the ANI
indication (R) and the Menu item 17 (L) appear on the LCD display. Press the FUN key (8) to enter the ANI
setup. Press the UP/DOWN keys (7) to select ON (function enabled) or OFF (function disabled). Press the
CONFIRM Key (6) to confirm the selection and exit to Stand-by mode or press the FUN Key (8) to confirm
and return to the Menu selection.
BUS : Busy Channel Lockout Setup
In stand-by status, press the FUN Key (8) to enter the menu mode. The SQL indication and the Menu item
1 (L) will appear on the LCD display (5). Press the UP/DOWN (7) keys several times until the BUS
indication (R) and the Menu item 19 (L) appear on the LCD display. Press the FUN key (8) to enter the
BUS setup. Press the UP/DOWN keys (7) to choose the desired option as follow :
CAR : when the radio is receiving a signal, you can' t transmit at the same time.
QDT : when the radio is receiving a signal with the same CTCSS/DCS code, you can' t transmit at the
same time.
OFF : the function is disabled.
Press the CONFIRM Key (6) to confirm the selection and exit to Stand-by mode or press the FUN Key (8)
to confirm and return to the Menu selection.
NAME ? : Channel Naming Setup
In stand-by status, press the FUN Key (8) to enter the menu mode. The SQL indication and the Menu item
1 (L) will appear on the LCD display (5). Press the UP/DOWN (7) keys several times until the NAME ?
indication (R) and the Menu item 20 (L) appear on the LCD display. Press the FUN key (8) to edit the
channel name; the first digit will blink on the LCD display. Press the UP/DOWN keys (7) to select the
desired number or letter of the flashing digit and press the CONFIRM key (6) to edit the next digit. The
selected digit will start flashing.
Press the FUN key (8) to confirm the edited channel name and press the CONFIRM key (6) to exit to
Stand-by mode.
English
Specifications - Optional Accessories
- 16 -
SPECIFICATIONS
General
Frequency 446.00625 - 446.09375 MHz
Channels 16 / 199
Channel spacing 12.5 KHz
DC input voltage 7.4 VDC
Operating temperature -20/+55°
Dimensions mm 58 x 124 x 38
Weight 230 gr. (with battery pack)
Receiver
Sensitivity (12dB Sinad) 0.25 µV
Audio output 500mW
Transmitter
RF output power 0.5W ERP
Modulation FM
Spurious & Harmonics in compliance with the R&TTE regulations
OPTIONAL ACCESSORIES
- LN-865 High capacity Li-Ion 7.2V 1800mAh rechargeable battery pack
- LP-865 High capacity Li-Poly 7.4V 1800mAh rechargeable battery pack
- KME-315 External Earset-Microphone with tie clip
- KME-614 External Earset-Microphone with adjustable ear hook
- KME-801 External Earset-Microphone for security and bodyguard
- KME-100A External Earset-Microphone with tie clip
- KME-200A External Earset-Microphone with flexible boom mic and tie clip
- KME-H115 External Speaker-Microphone (light duty)
- KST-301 External Speaker-Microphone (heavy duty)
- CDLS-HTHX Programming Kit (PC interface cable and software CD)
English
Frequency / Channels Programming - User Information
- 17 -
CHANNEL
FREQUENCY
TX
FREQUENCY
RX
CTCSS / DCS
TONE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
446.00625
446.01875
446.03125
446.04375
446.05625
446.06875
446.08125
446.09375
446.00625
446.01875
446.03125
446.04375
446.05625
446.06875
446.08125
-
446.00625
446.01875
446.03125
446.04375
446.05625
446.06875
446.08125
446.09375
446.00625
446.01875
446.03125
446.04375
446.05625
446.06875
446.08125
-
NO
NO
NO
107.2
110.9
114.8
118.8
123.0
127.3
131.8
136.5
141.3
146.2
123.0
156.7
-
FREQUENCY / CHANNELS PROGRAMMING (factory default programming)
User Information
in accordance with art. 13 of the Legislative Decree of 25th July 2005, no. 15 ”Implementation of Directives 2002/95/EC,
2002/96/EC and 2003/108/EC, relative to reduction of the use of hazardous substances in electrical and electronic
equipment, in addition to waste disposal”.
The crossed bin symbol shown on the equipment indicates that at the end of its working life the product must
be collected separately from other waste.
The user must therefore take the above equipment to the appropriate differentiated collection centres for
electronic and electro technical waste, or return it to the dealer when purchasing a new appliance of
equivalent type, in a ratio of one to one.
Appropriate differentiated waste collection for subsequent recycling, treatment and environment-friendly disposal of the
discarded equipment helps to prevent possible negative environmental and health effects and encourages recycling of
the component materials of the equipment.
Illegal disposal of the product by the user will be punished by application of the administrative fines provided for by the
legislative decree no. 22/1997 (article 50 and following of the legislative decree no. 22/1997).
English
Indice - Importante . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Informazioni per l' utente . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Disimballaggio e verifica delle parti - Accessori forniti . . . . . . . . . . . . . . . . . . . . . . . . . 20
Preparazione . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-23
Familiarizzare con il prodotto . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-27
Operazioni di base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Utilizzo del menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-30
Funzioni supplementari . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-33
Specifiche tecniche . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Accessori opzionali . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Programmazione canali - Avviso agli utenti . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Avvertenze importanti . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Garanzia limitata . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Indice - Introduzione
- 18 -
IMPORTANTE !
Questo ricetrasmettitore è programmabile tramite PC, utilizzando l’apposito software e cavetto
di interfaccia (opzionali). L’eventuale programmazione o modifica della programmazione
esistente deve essere eseguita da un tecnico specializzato o da un centro di assistenza
autorizzato. Alcune funzioni del ricetrasmettitore potrebbero essere programmate in violazione
delle norme tecniche in vigore per l’utilizzo della banda PMR- 446. E’ responsabilità dell’utente
verificare che eventuali modifiche nella programmazione delle funzioni del ricetrasmettitore
siano conformi a quanto previsto dalle norme tecniche in vigore. Modifiche al prodotto,
manomissioni, alterazione delle regolazioni interne o delle strutture esterne della radio e
programmazioni in violazione delle norme di legge fanno decadere le certificazioni e
omologazioni del prodotto ed il diritto all’utilizzo dello stesso.
INTEK s.r.l. declina qualsiasi responsabilità relativamente a modifiche della programmazione
del ricetrasmettitore, eseguite dall’utente o da terzi, dopo la consegna del prodotto.
IMPORTANTE !
Questo ricetrasmettitore è stato pre-programmato in origine, al fine di consentire all’utente
l’utilizzo immediato del prodotto dopo l’acquisto. La programmazione eseguita comprende
l’attivazione di canali/frequenze in banda PMR-446, nel rispetto delle norme tecniche in vigore
per l’utilizzo di questa banda. Per i dettagli riferirsi alla tabella a pag. 24.
Italiano
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
INTEK HT-174S/SCR Manuale del proprietario
- Categoria
- Radio a due vie
- Tipo
- Manuale del proprietario
- Questo manuale è adatto anche per
in altre lingue
- English: INTEK HT-174S/SCR Owner's manual
Documenti correlati
-
INTEK MT-446EX Manuale del proprietario
-
-
-
-
-
-
INTEK MT-5050 Manuale del proprietario
-
-
INTEK MT-3030 Manuale del proprietario
-
