Haier LE29C810C Manuale utente

LE29C810C

Welcome

Important Information

01 Safety Warnings

2

Safety notice

Warning and cautions

3

4

Main Parameter

Base Stand Assembly Instruction

02 Introduction

5

7

Wall Mounting Installation Guidelines

Control Panel

8

9

Rear/Side Sockets

9

Connecting your Haier TV

Common Interface

10

12

Remote Control

03 Remote Control

13

Teletext

14

Installation Guide

04 Operation

15

CHANNEL MENU 15

Auto Tuning (DVB-T) 15

Auto Tuning (DVB-C) 16

DTV Manual Tuning (DVB-T)

DTV Manual Tuning (DVB-C)

ATV Manual Tuning

17

PICTURE MENU 18

19

Audio

MENU

18

Clock

MENU

18

SETUP

MENU

LOCK

MENU

EPG Menu(Electronic Program Guide)

20

PVR function

20

Prepare to record the program

20

19

Record the program

21

DTV Recording

21

Timeshift function

22

USB Player

23

Trouble shooting

05 Trouble shooting

25

Specification 28

Program edit

Common Interface

17

18

Signal Information

Software Updated(USB)

18

Thanks for buying this 29" LED LCD TV . This guide will help you set up and

begin using your TV.

IMPOR

TANT INFORMATION

READ ALL INSTRU

CTIONS BEFORE USE AND KEEP FOR FUTURE REFERENCE.

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE.

FOR ANY PROBLEMS, REFER SERVICING TO THE CUSTOMER HELP LINE. THERE IS A LIGHTNING ARROW SYMBOL IN

THE TRIANGLE: THIS SYMBOL INDICATES HIGH VOLTAGE IS PRESENT INSIDE. IT IS DANGEROUS TO MAKE ANY KIND OF

CONTACT WITH ANYINSIDE PART OF THIS PRODUCT.

THERE IS A EXCLAMATION MARK IN THE TRIANGLE: THIS SYMBOL ALERTS YOU THAT IMPORTANT LITERATURE

CONCERNING OPERATION AND MAINTENANCE HAS BEEN INCLUDED WITH THIS PRODUCT.

CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK AND FIRE, DO NOT PUT THE TV SET NEAR

SOURCES OF HUMIDITY. DO NOT USE ANY ABRASIVE CLEANERS WHICH MAY SCRATCH OR DAMAGE

THE LCD SCREEN. AVOID CONTACT WITH OBJECTS THAT MAY SCRATCH THE LCD SCREEN.

NOTE: SERVICING THE UNIT YOURSELF IS UNAUTHORISED AND COULD LEAD TO INJURY OR PRODUCT

DAMAGE. REFER ALL SERVICING TO THE CUSTOMER HELPLINE.

Now you can get star

ted!

29" HD Ready Digital LED LCD TV

Remote control

Instruction Manual

Quick start guide

AAA ba x2ttery

YPbPr Connect Cable

01 Safety warnings

Stand

Safety notice

EN-3

Dim:515*320mm(不包括底座）

Warning

High voltages are used in the operation of this

television receiver. Do not remove the cabinet

back from your set. Refer servicing to qualified

service personnel.

Warning

To prevent fire or electrical shock hazard, do

not expose the television receiver to rain or

moisture.

Warning

Do not drop or push objects into the

television cabinet slots or openings. Never

spill any kind of liquid on the television

receiver.

Caution

Do not block the ventilation holes in the back

cover. Adequate ventilation is essential to

prevent failure of electrical components.

Caution

Do not trap the power supply cord under the

television receiver.

Caution

Never stand on, lean on, or suddenly push the

television or its stand. You should pay special

attention to children. Serious injury may result if

it should fall.

Caution

Do not place your television on an unstable cart,

stand, shelf or table. Serious injury to an

individual , and damage to the television, may

result if it should fall.

Caution

When the television receiver is not used for an

extended period of time, it is advisable to

disconnect the AC power cord from the AC

outlet.

Caution

If the television is to be built into a compartment

or similar enclosure, the minimum distances must

be maintained. Heat build-up can reduce the

service life of your television, and can also be

dangerous.

WARNING AND CAUTIONS

EN-4

Panel

PAL-B/G ,I , D/K

PAL/SECAM/MPEG2/MPEG4/H.264

AC 100

-

240V 50/60Hz

2x8W

Analog RGB(PC) x1; PC audio x1

High-Definition Multimedia Interface (HDMI) x 2

Video Input x 1

Audio Input x1

YPbPr x 1

SCART x 1

42W

29

CI x 1

USB x 1

RF Co-Ax x 1

Composite video input >=350

YPbPr >=400

Headphone x 1

S/PDIF x 1

TV System

Video Signal System

Input Power Voltage

Power consumption

Standby Power consumption

Audio Output Power (THD 7%)

Signal Input

Signal output

Horizontal definition (TV line)

SECAM-B/G , D/K , L , L’

<0.30W

DVB-T, DVB-C

INSTALLATIONCAUTION

*Locate the TV in the room where light does

not strike the screen directly.

*Total darkness or a reflection on the picture

screen can cause eyestrain. Soft and indirect

lighting is recommended for comfortable

viewing.

*Allow enough space between the TV and the

wall to permit ventilation.

*Avoid excessively warm locations to prevent

possible damage to the cabinet or premature

component failure.

*Do not cover the ventilation openings when

using theTV.

Main parameter

Main features

4 NICAM；

5 T ；ime-shift

3

HDMI interface and SCART

Interface；

High luminance, wide viewing

angle；

2

Used as Television, display terminal,

PC display；

1

Never tamper with any components inside the

TV, or any other adjustment controls not

described in this manual. All LED-TV's are high

voltage electrical equipment.

When you clean dust or any water drops off the

SCREEN or CABINET or around any of the

buttons or connectors, the power cabled should

be removed from the power socket. Wipe the TV

with a soft, dry, dust free cloth.

During thunderstorms, unplug the power cable

and aerial / antenna cable to prevent damage to

your TV and any other devices connected to it.

All repairs to this TV should only be performed

by qualified TV service

personnel.

02 Introdution

Introduction

EN-5

1000(DTV);100(ATV)Storage channel number

PRESET MODE

PC

3

5

1024x768

1280x1024

60

1

640x480

60

31.47

2

800x600

60

37.88

48.36

63.98

RESOLUTION

V.Freq.(KHz) H.Freq.(KHz)

4

1360x768

60

47.7

Introduction

EN-6

Base Stand Assembly Instruction

INSTALLATION NOTES

Locate the TV in a room where light does not strike the screen directly. Total darkness or a

reflection on the screen can cause eyestrain. Soft and indirect lighting is recommended for

comfortable viewing.

Allow enough space between the TV and the wall to permit ventilation.

Please do not attempt to rotate the TV on the stand.

Avoid excessively warm locations to prevent possible damage to the cabinet or premature

component failure.

Introduction

EN-7

1. Place the TV with the display side down on a

flat surface. Use a cloth to protect

.

the

display Position the stand base plate onto the

bottom of the stand pole.

2. Attach the stand base plate to the stand pole

by firmly tightening the supplied screws.

WALL MOUNTING INSTALLATION GUIDELINES

2.Remove the screws from the lower part of the

television, where the base joins to the TV, and take

away the stand (put the stand somewhere safe for

future use).

1.Place the LED LCD Television onto a solid

surface. Please place some soft material

over the front of the screen to protect it

from any damage.

3.Use the four screws provided to fix the TV onto a wall mounting bracket (not included)

via the four VESA standard holes on the back of the television.

Introduction

EN-8

This television can be wall mounted as follows:

M4X10

200mm

100mm

Rear/Side Sockets

1

2

3

Remote control sensor.

Indicator LED:

RED: STAND BY.

Key board.

1

SOURCE

Display the input source menu.

MENU

Display main MENU.

3

4

CH+/CH-

In TV mode,press CH+ or CH- to change

the channel up and down.

In MENU, press CH+ or CH- to select items .

STANDBY

2

VOL+/VOL-

Adjust sound level.

In MENU,adjust the item that you selected.

5

1

YPbYr

2

input

3

4

input

5

digital audio output

input

AC Power Source

6

input

S/PDIF

SCART

L/R AUDIO

VIDEO

7

input

USB

input

8

9

HDMI2(with ARC) input

10

11

12

13

input

HDMI1

COMMON INTERFACE(CI)

PC AUDIO

input

analogue audio output

input

HEADPHONE

input

VGA

14

input

RF

Introduction

Front control panel

EN-9

AC-INPUT

100-240V~ 50/60Hz

YPbPr

VIDEO L R

SPDIF OUTPUT

SCART

2 3

1

4

6

5

7 8 9

11 12 13 1410

30 30

1

2

3

MENU

CH+

CH-

VOL+

VOL-

2

SOURCE

1

3

4

STANDBY

5

COMMON INT ERFACE (CI)

VGA

RF

USB

HDMI2 HDMI1

HEADPHONE

PC AUDIO

COMMON INTERFACE (CI)

RY

W

Audio/Video machine

with HDMI interfaces

CVBS, DVD Player or other

machine with CVBS/S-Video.

Introduction

Connecting to your Haier TV

G Green (Y)

B Blue (Pb/Cb)

W White(AUDIO-L )

R Red (AUDIO-R, Pr/Cr)

Y Yellow (VIDEO)

EN-10

Amplifier

AC-INPUT

100-240V ~ 50/60Hz

YPbPr

VIDEO L R

SPDIF OUTPUT

SCART

GRB

CVBS, DVD Player or other

machine with YPbPr/YCbCr.

COMMON INT ERFACE (CI)

VGA

RF

USB

HDMI2 HDMI1

HEADPHONE

PC AUDIO

COMMON INTERFACE (CI)

Introduction

EN-11

Connecting a DVD player / Satellite / cable

set top box receiver / games console / PC or

Laptop

There are several options to connecting a DVD

player / Satellite or Cable set top box receiver /

games console / PC or Laptop to your TV.

Option 1 SCART

Connect a SCART cable (not supplied)

from the SCART socket on the TV to the DVD

player / Satellite or cable set top box receiver or

games consol.

To select the device connected with the

SCART cable press the SOURCE button on the

remote and use the keys to select SCART

and press the OK button.

Note:- The TV will default to the SCART

connection when the TV is switched on.

Option 2 HDMI

If the device you want to connect to the

is switched on, switch off the device first.

Connect a HDMI cable (not supplied) from

the HDMI socket on the TV to the DVD player /

Satellite or cable receiver or games consol.

Switch on the device you have just

connected to the TV

To select the device connected with the

HDMI cable press the SOURCE button on the

remote and use the keys to select HDMI and

press the OK button.

Option 3 AV Audio Visual

(Yellow/White/Red)

Make sure that both TV and the device are

switched off before connecting.

Connect the AV cables (not supplied) from

the Video (yellow) and Audio (white, red)

sockets on the TV to the DVD player or games

console etc.

To select the device connected with the

AVI cable press the SOURCE button on the

remote and use the keys to select AV and

press the OK button.

Option 4 COMPONENT

(Green/Blue/Red)+(White/Red)

Make sure that both TV and the device are

switched off before connecting.

TV

Connect the cables (not supplied) from the

COMPONENT IN sockets Y, Pb, Pr (green,

blue, red) and L-Audio-R (white, red) on the TV

to the DVD player or games console etc.

To select the device connected with the

cable press the SOURCE button on the

remote and use the▼▲ keys to select COMPONENT

and press the OK button.

Option 5 VGA (15pin Sub-D)

Connect a VGA cable (not supplied) from the

VGA socket on the TV to the PC / Laptop.

To select the PC / Laptop connected with the

VGA cable press the SOURCE button on the

remote and use the keys to select PC and

press the OK button.

Note VGA is video only. For audio from your

PC/Laptop you need to connect a separate

cable from the PC Audio (3.5mm jack) to the

headphone socket on you PC/Laptop (3.5mm

jack)

Option 6 USB

Most USB sticks can be connected to your TV

and some digital cameras may also work.

Connect USB stick (not supplied) or a USB

cable (not supplied) to the TV.

To select the USB device connected to the TV,

press the SOURCE button on the remote and

use the keys to select USB and press the

OK button.

Note1:Only *.jpg and *.mp3 files will work,

other file types are not guaranteed and may not.

Note 2. Apple iPhones and iPods are not

compatible with your TV.

Note 3. When connecting any device to the USB

connection, keep the USB cable length as short

as possible.

Option 7

Option 8

Component

HEADPHONE OUTPUT

S/PDIF OUTPUT

S/PDIF is a digital audio connection used to

connect audio equipment, for example home

theatres and other digital HiFi systems over

short distances. The signal is transmitted over

either a coaxial cable with RCA connectors.

Make sure that both TV and the device are

switched off before connecting.

Connect the AV cables (not supplied) from

the S/PDIF socket on the TV to the Home Theater

sound system or digital HiFi system etc.

Insert the plug of the earphone into the headphone

socket on the TV. The TV speakers are now muted.

Alternatively you can also plug in external speakers if

required.

Connecting to your Haier TV

The common interface (CI) slot is designed to

accept the conditional Access (CA) Module and

Smart card in order to view the pay TV

programmes and additional services.

Contact your Common Interface service provider

to get more information about the modules and

subscription.

Please noted that CA modules and smart cards

are neither supplied nor optional accessories

from us.

COMMON INTERFACE

Introduction

EN-12

Channel

Picture

Audio

Clock

Setup

Lock

Auto Scan

Signal Information

Software Update(USB)

Manual Scan

Program Edit

Common Interface

MENU Move OK

OK

Common Interface option.

CAM Removed

CAM Inserted

1.POWER:Press to turn on the TV.

2.D.MENU:No function.

3.P.Mode:To switch picture mode.

4.INFO:Press to display the current signal status,including

input source and channel audio mode.

5.AUDIO I/II: Press to select MONO,Nicam stereo for ATV

channel. Select Audio language for DTV channel.

6.SUBTITLE:

7.Number Buttons:For direct access to channels.

8.SOURCE:To select input source.

9.MUTE:To disable or enable the sound output.

10.Volume Control:To adjust sound level.

11.MENU:To display TV menu.

12.OK:To confirm selection.

13.EXIT:To return to the previous menu or exit menu.

14.Teletext Index/USB PLAY

15.REPEAT:No function

16.Teletext Green Button / USB Movie Fast Forward

17.Teletext Red Button / USB Movie Fast Rewind

18.Teletext Mix

19.Teletext Text

20.Teletext Reveal

21.Teletext Size

22.Teletext Time/ANGLE/REC.LIST(teletext time is no

function)

23.Teletext Mode:No function

24.Teletext Hold

25.Teletext Subcode:Teletext Subpage

26.Teletext Blue Button / USB Movie Next File

27.Teletext Yellow Button / USB Movie Previous File

28.USB STOP

29.USB PAUSE

30.START RECORD

31.UP,DOWN,LEFT,RIGHT Cursor:Press to navigate your

selection.

32.Fav:To access your favourite channels list in TV or DTV

mode.

33.Select Programme:Press

▲▼ Button to select the next or

previous TV channel.

34.GUIDE:Press to display electronic programme guide in TV

mode.

35.Q.View:To access the previously viewed channel.

36.CH.LIST: Press to display the channel list.

37.Screen:To change picture aspect ratio.

38.Sleep :Set timer to turn off the TV.

39.S.Mode:To switch sound mode.

40.OPEN/CLOSE:No Function

Press to switch the subtitle language or turn off.

:Also applicable to TV's with built in

DVD player

Remote Control

03 Remote Control

Insert Batteries Into the Remote Control

1. Remove the battery cover.

2. Inserting the 2 AAA 1.5V batteries making

sure the polarity(+ or -) of the batteries matches

the polarity marks inside the unit

3. Mount the battery cover. Replace with new

batteries when the TV set begins to show the

following symptoms: Operation is unsteady or

erratic. Sometimes the TV set does not function

with Remote Control Unit.

Remark:

1) Alkaline Battery Recommeded.

2) Remove batteries when they are exhausted

or if the remote control is not to be used for long

time.

EN-13

E

TEXT

SELECTING A PAGE

DIRECT ACCESS

TO THE ITEMS

INDEX

SUB PAGE

HOLD

REVEAL

Press:

You will obtain :

LIST

TELETEXT

Enter the number of the page required using the 0 to 9 up/down. Example:

page 120, enter 120. The number is displayed top left, the counter turns and

then the page is displayed. Repeat this operation to view another page. If

the counter continues to search, this means that the page is not

transmitted. Select another number.

Coloured are as are displayed at the bottom of the screen. The 4 coloured

keys are used to access the items or corresponding pages. The coloured

areas flash when the item or the page is not yet available.

This returns to the contents page (usually page 100).

Certain pages contain sub-pages which are automatically displayed

successively. This key is used to stop or resume sub-page acquisition.

The indication appears top left.

To freeze the page.

To display or hide the concealed information (games solutions).

The user can set four favorite pages to be directly linked to the four color

keys. While list mode is activated, it is not possibility to use TOP or FLOF

navigation with the colorkeys. The favorite page numbers should be stored

and restored to/from nonvolatile memory for each channel by the system

software.

This is used to call or exit teletext modes. The summary appears with a list

of items that can be accessed. Each item has a corresponding 3 digit page

number. If the channel selected does not broadcast teletext, theindication

100 will be displayed and the screen will remain blank (in this case, exit

teletext and select another channel).

Teletext is an information system broadcast by certain channels which can be consulted like

a newspaper. It also offers access to subtitles for viewers with hearing problems or who are

not familiar with the transmission language(cable networks, satellite channels, etc.)

Remote Control

EN-14

Operation

04 OPERATION

The First Time Setup screen will appear when the TV

is first switched on or reset to the factory setting.

Installation Guide

1).Press the ▼▲ buttons to navigate the menu and ◀▶

buttons to change the settings. Select your desired

language ,Home/Shop Mode to be displayed on the menu.

2). Press the ◀▶buttons to select AIR/Cable means

DVB-T/DVB-C.

If you select DVB-C, you will select Full or Quick way

to scan.

Also you can select Auto Scan mode. DTV+ATV or

DTV only, or ATV only.

HOME or Shop modes

1. Home Mode is an energy-saving Mode. Home

Mode is recommended for normal viewing setting and

is set as default during manufacturer.

2. Shop Mode is an option for retailers for advertising or

product presentation. Shop Mode has a brighter image

than Home Mode,also it can pop up a pop menu every

30 seconds.

3. You may switch between Home or Shop Mode

as you choose.If you choose Shop Mode ,it will enter

HDMI1 source automatically,and you wil press Exit key

to exit POP menu.

EN-15

First Time Setup

OSD Language English

Mode Setting Home Mode

Country Germany

Start

Auto Scan DTV+ATV

Antenna Type Air

First Time Setup

OSD Language English

Mode Setting Home Mode

Country Germany

Start

Auto Scan DTV+ATV

Antenna Type Cable

Cable Quick

3). Channel tuning will commence. This operation

may take up to 6 minutes. The display will show

the progress of the tuning and the number of

channels found.

4). If you want to skip the DTV tuning, press the

MENU button to interrupt the tuning half way.

You will then go straight to ATV tuning.

5). After tuning is complete, the channels are

arranged in a preset order. If you wish to skip channels,

modify the preset order or rename

channels, select

Programme Edit under the

Channel menu.

1. 1)Auto Tuning (DVB-T)

1. CHANNEL MENU

1). Press the MENU button and then press the▼▲ buttons

to select the CHANNEL menu and then press the OK button

or Right button.

2). Press the ▼▲ buttons to select Auto Scan and then

press the OK button.

Channel

Picture

Audio

Clock

Setup

Lock

Auto Scan

Signal Information

Software Update(USB)

Manual Scan

Program Edit

Common Interface

MENU Move OK

OK

connected to the TV. Please refer to the cable TV's

instructions manual for further details.

DTV Digital TV

ATV Analogue TV (not used in UK)

DTV-C Digital TV via cable

In the UK to connect to cable TV you will require the

appropriate cable TV's company's 'set top box' to be

Operation

EN-16

3). Press the ◀▶buttons to select Antenna Type to Air

means DVB-T.

5). In the Mode item, press the

◀▶buttons to select tune

mode: ATV / DTV / DTV + ATV. Press the

▼button to select

Start to start.

Channel

Picture

Audio

Clock

Setup

Lock

Antenna Type Air

Country Germany

Mode DTV+ATV

Start

MENU Move OK

OK

6). Channel tuning will commence. This operation may take

up to 6 minutes. The display will show the progress of the

tuning and the number of channels found.

7). If you want to skip the DTV tuning, press the MENU

button to interrupt the tuning half way. You will then go

straight toATV tuning. You may repeat the above step if

you also want to skip the ATV tuning. An installation

reminder will appear the next time you turn on the TV,

if no channel is found.

8). After tuning is complete, the channels are arranged in a

preset order. If you wish to skip channels, modify the preset

order or rename channels, select P

rogramme Edit under the

channel menu.

Channel

Picture

Audio

Clock

Setup

Lock

MENU Move OK

OK

Scanning Ch12

Digital Channels Found:

DTV: 3

Radio: 0

Data: 0

Analog Channels Found: 0

1.2 )Auto Tuning (DVB-C)

1). Press the MENU button and then press the▼▲

buttons to select the CHANNEL menu and then

press the OK button.

2). Press the▼▲ buttons to select Auto Tuning and

then press the OK button,select Antenna Type to cable

mean DVBC.

3). Press the▼button and then press the◀▶▼▲buttons

to select the country you will operate the TV.

Channel

Picture

Audio

Clock

Setup

Lock

Antenna Type Cable

Country Germany

Mode DTV+ATV

Start

MENU Move OK

OK

Channel

Picture

Audio

Clock

Setup

Lock

Quick

Full

Advanced

MENU Move OK

OK

4). In Country mode, press the ◀▶buttons to select the

country where you will operate the TV.

4). In the Mode menu, press the

◀▶buttons to select ATV /

DTV / DTV + ATV.

5). Channel tuning will commence. This operation may

take up to 6 minutes. The display will show the

progress of the tuning and the number of channels

found.

6). If you want to skip the DTV tuning, press the MENU

button to interrupt the tuning half way. You will then go

straight to ATV tuning. You may repeat the above step if

you also want to skip the ATV tuning. An installation

reminder will appear the next time you turn on the TV,if no

channel is found.

7). After tuning is complete, the channels are arranged

in a preset order. If you wish to skip channels, modify

the preset order or rename channels, select P

rogramme

Edit under the channel menu.

Channel

Picture

Audio

Clock

Setup

Lock

Digital Scan Ch5

Start

Strength 54

MENU Move OK

OK

Operation

EN-17

2. 1 )DTV Manual Tuning (DVB-T)

All the channels including ATV, DTV and Radio

can be tuning by one time,if the Tune Type is

DTV+ATV .

All the stored channels will be disappear after

auto tuning .

After auto tuning , the channel will skip to

the first DTV channel.

2). Press the▼▲ buttons to select DTV Manual Tuning

and then press the OK button,if you select Air in Auto

Scan, you will enter DVB-T manual scan menu.

4). Press the MENU button to return back to the

main menu.

5). Press the EXIT button to exit the menu.

2. 2 )DTV Manual Tuning (DVB-C)

1). Press the MENU button and then press the▼▲

buttons to select the CHANNEL menu and then

press the OK button.

3). The DTV Manual Tuning screen will pop up.

Press the ◀▶ buttons to select the desired UHF channel

or press the OK button then input channel number. Select

Start to commence the search of that channel. When the

signal has been tuned, the picture and signal strength will

be displayed on the screen.

1). Press the MENU button and then press the

buttons to select the CHANNEL menu and then

press the OK button.If you select Cable in Auto scan,you

will enter DVBC manual scan menu.

▼▲

Channel

Picture

Audio

Clock

Setup

Lock

Frequency 474000K

Symbol Rate 6875K

Modulaton Auto

Start

MENU Move OK

OK

2). The CADTV Manual Tuning screen will pop up.

Press the▼▲◀▶buttons to select(Frequency /Symbol

(ks/s/QAM Type QAM) press Start to commence the

search of that channel. When the signal has been tuned,

the picture and signal strength will be displayed on the

screen.

3). Press the MENU button to return back to the

main menu.

4). Press the EXIT button to exit the menu.

3) ATV Manual tuning :

You can change the sound system to search theanalog TV

channels and fine tune the channels , then storage the

channels you selected.

1. Press teletext red button to storage to channels

after manual tuning .

2. If the number save to is the same as the number

Current CH, when you press Red button,the save to

number will cover the Current CH number.

Save to 1

System BG

Current CH1

Search

Frequency 44.25 MHz

Fine tune

Save

ATV Manual Tuning

4). Program edit:

Press the ▲or▼ Buttons to select Program Edit in the

Channel Menu. Then press the OK Button to enter the sub-

Menu. Then you will need to select the program you wish

to edit.

12

abc

3

def

4

ghi

5

jkl

6

mno

7

pqrs

8

tuv

9

wxyz

Operation

EN-18

5). Common Interface

This menu can display the CI card' s information.

The second item of the MENU is PICTURE MENU.

You can adjust picture effect here, such as

contrast, brightness, etc.

Press ▼▲ to move, press OK to adjust.

2. PICTURE MENU

Channel

Picture

Audio

Clock

Setup

Lock

Picture Mode Standard

Medium

Aspect Ratio 16:9

Color Temp Standard

Brightness 50

Contrast 45

Sharpness 60

Color 45

Tint 0

NR Medium

Dynamic Contrast

MENU Move OK

OK

1).There are four colors temperature modes

can be selected standard, warm, cool,user

2).Screen is available in PC mode only which

can adjust Horizontal position, vertical

position, size and phase.

3.AUDIO MENU

The third item of the MENU is the AUDIO

MENU.

You can adjust the sound effect here such as

treble, bass, balance etc.

Press ▼▲ to move, press OK to adjust.

Channel

Picture

Audio

Clock

Setup

Lock

Sound Mode Standard

Treble 0

Bass 0

Balance

0

Auto Volume On

Surround

Sound Off

SPDIF

Auto

Audio

Description

Audio Only On / Off

MENU Move OK

OK

001 The HITS

003 UKTV Br’tldeas

004 f th

005 Ideal World

006 Colourbars100

001 Kiss

002 Smash Hits!

003 Kerrang!

002 TMF

Delete

Programme Edit

DTV

Radio

Move

Skip

Rename Favorite

Delete: Press the Red Button to delete the channel you

highlighted.

SKIP: Press the Yellow Button to select the Skip function

and a SKIP icon will be displayed next to the program and

it will be skipped when changing the channel.

MOVE: Press the Green Button to highlight the select the

channel you want to move. An icon will display ahead the

channel number. Then press the ▼ / ▲ Buttons to a new

position and press the Green Button to confirm.

Rename: (For ATV only) Press the Blue Button for renaming

the channel. Press the number key circularly to enter a new

name and press the OK Button to confirm (the number key

as the following table).

FAV: Press the FAV Button (instead of color Buttons) to set

the favourite channel. (If you want to view the Favorite

Channel List you need to exit Program Edit Menu and then

press the FAV Button.)

6). Signal Information (Only for DTV)

Press the ▼ / ▲ Buttons to select the Signal Information

in the Channel Menu. Then press the OK Button to show the

related information of the current channel.

7). Software Updated (USB)

Press the ▼ or ▲ Buttons to select Software Update (USB)

in the Channel Menu. Then press the OK Button to update

software by using a USB. Follow the software upgrade

instructions provided with the software.

Note: We recommend you perform a factory reset (refer to

Restore Factory Default in Setup menu) to ensure the unit

is successfully upgraded.

1.Auto volume: only available when the input

signal volume is too large or distortion.

2. Audio Only: set on to turn off the TV screen,

and then you can listen TV.

4.CLOCK MENU

FAV

Operation

EN-19

Channel

Picture

Audio

Clock

Setup

Lock

Sleep Timer Off

Date 2010/04/30

On

Time

f

Auto

Sleep On

Time

Zone

Of

Time

MENU Move OK

OK

5.SETUP MENU

The fifth item of the MENU is the SETUP MENU. You can

adjust the Menu language, Audio language,Subtitle

language etc.

In PVR File system menu you can set up USB

disk for PVR.

Auto Standby(4hr)

1.If after 4 hours from switch on and no changes have

been made to the TV, for example no channel or volume

changes,the TV will start the automatic power down

sequence.

And pop-up window will appear on screen.

Channel

Picture

Audio

Clock

Lock

O E

A

Languages

H

H O

O

SD

Language nglish

udio

Subtitle

Country Germany

PVR

File System

Timeshift Record Time 1hour

Auto Standby(4hr) On(4 hours)

Mode Setting ome Mode

DMI CEC Control n

OSD Time ff

Restore Factory Default

MENU Move OK

OK

Setup

PVR Settings

Move Left

Move Right

Select

Exit

OK

EXIT

File Manager Device List

Scheduled Record

6.LOCK MENU

The sixth item of the menu is the LOCK MENU

You can lock system, set password, block program

and set parental guidance Once you set the lock

system on you can not search the channels or

change any programs.

Restore factory default will clear all the programs

and password.

Channel

Picture

Audio

Clock

Enter Password ----

Enable Off

New Password ----

Channel Locks

Parental Rating None

MENU Move OK

OK

Setup

Lock

The default pass word is 0000, If you forget the

password, you can use the super password:9443.

Block program: Press ▼▲ to choose the

program ,press teletext green button to block

the program. If you want unblock the program,

pls enter the main menu , input the password,

then press green button again.Parental

guidance: Press ◀▶to choose rating.

Timeshift Record Time: To set the max Timeshift

Record Time.

Auto Standby (4hr): To set the unit to standby

after any 4hours operation.

Mode Setting: To set Home mode or Store mode.

HDMI CEC Cntrol: To set CEC function to on or off.

OSD Time: Press ◄ or ► to select the menu

display time.

Restore Factory Default

Press the ▼ or ▲ Buttons to select Restore Factory

Default and press the OK Button to enter the first

setup. Once confirmed, all the settings will be

cleared. This should be used if you experience

any issues with your TV.

standby. To override the automatic shutdown press any

button on the remote control.

2. To cancel the automatic power-down

On the Option Menu select Auto standby(4hr),The TV

screen returns to the Option Menu and Auto standby

(4hr) option will display.

Auto standby (4hr) OFF

After 150 seconds the TV will automatically switch to

The fourth item of the menu is the

You can adjust the clock, power on/off time,

sleep time etc .

CLOCK MENU

Press ▼▲ to move, press OK

to adjust.

To return to auto shutdown after 4 hours repeat the

above except use the left arrow key to select YES.

Auto Sleep

If after 15 minutes there is no signal input, the TV will switch

off to Auto Sleep, when the Auto Sleep function is set to ON.

The clock time is automatically set when the TV is able to

receive DTV.

La pagina sta caricando ...

Haier LE29C810C Manuale utente

Haier LE29C810C Manuale utente

in altre lingue

Documenti correlati

Altri documenti