Yamaha TSX-B141 Brick Manuale utente

G

En Fr

OWNER’S MANUAL

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

BRUKSANVISNING

MANUALE DI ISTRUZIONI

MANUAL DE INSTRUCCIONES

GEBRUIKSAANWIJZING

ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ

De Sv It Es

Nl

Ru

i En

1 To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

2 Install this unit in a well ventilated, cool, dry, clean

place – away from direct sunlight, heat sources,

vibration, dust, moisture and cold. For proper

ventilation, allow the following minimum clearances.

Top: 15 cm (6 in)

Rear: 10 cm (4 in)

Sides: 10 cm (4 in)

3 Locate this unit away from other electrical

appliances, motors, or transformers to avoid

humming sounds.

4 Do not expose this unit to sudden temperature

changes from cold to hot (or vice versa), and do not

locate this unit in an environment with high humidity

(i.e., a room with a humidifier) to prevent

condensation inside this unit, which may cause an

electrical shock, fire, damage to this unit, and/or

personal injury.

5 Avoid installing this unit where foreign object may

fall onto this unit and/or this unit may be exposed to

liquid dripping or splashing. On the top of this unit,

do not place:

– Other components, as they may cause damage

and/or discoloration on the surface of this unit.

– Burning objects (i.e., candles), as they may cause

fire, damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall

and liquid may cause electrical shock to the user

and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth,

curtain, etc. in order not to obstruct heat radiation. If

the temperature inside this unit rises, it may cause

fire, damage to this unit, and/or personal injury.

7 Do not plug in this unit to a wall outlet until all

connections are complete.

8 Do not operate this unit upside-down. It may

overheat, possibly causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cable from the wall

outlet, grasp the plug; do not pull the cable.

11 Do not clean this unit with chemical solvents; this

might damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used.

Using this unit with a higher voltage than specified is

dangerous and may cause fire, damage to this unit,

and/or personal injury. Yamaha will not be held

responsible for any damage resulting from use of this

unit with a voltage other than specified.

13 To prevent damage by lightning, keep the power

cable and outdoor antennas disconnected from a wall

outlet or this unit during a lightning storm.

14 Do not attempt to modify or fix this unit. Contact

qualified Yamaha service personnel when any

service is needed. The cabinet should never be

opened for any reasons.

15 When not planning to use this unit for long periods of

time (i.e., vacation), disconnect the AC power plug

from the wall outlet.

16 Be sure to read the “TROUBLESHOOTING” section

on common operating errors before concluding that

this unit is faulty.

17 Before moving this unit, press to set the unit to

off, and disconnect the AC power plug from the wall

outlet.

18 Condensation will form when the surrounding

temperature changes suddenly. Disconnect the power

cable from the outlet, then leave this unit alone.

19 When using this unit for a long time, this unit may

become warm. Turn the unit off, then leave this unit

alone for cooling.

20 Install this unit near the wall outlet and where the AC

power plug can be reached easily.

21 The batteries shall not be exposed to excessive heat

such as sunshine, fire or the like.

– Keep the batteries in a location out of reach of

children. Batteries can be dangerous if a child

were to put in his or her mouth.

– If the batteries grow old, the effective operation

range of the remote control decreases

considerably. If this happens, replace the batteries

with two new ones as soon as possible.

– Do not use old batteries together with new ones.

– Do not use different types of batteries (such as

alkaline and manganese batteries) together. Read

the packaging carefully as these different types of

batteries may have the same shape and color.

– Exhausted batteries may leak. If the batteries

have leaked, dispose of them immediately. Avoid

touching the leaked material or letting it come

into contact with clothing, etc. Clean the battery

compartment thoroughly before installing new

batteries.

– If you plan not to use the unit for a long period of

time, remove the batteries from the unit.

Otherwise, the batteries will wear out, possibly

resulting in a leakage of battery liquid that may

damage the unit.

– Do not throw away batteries with general house

waste. Dispose of them correctly in accordance

with your local regulations.

22 Be sure to use the AC adaptor supplied with this unit.

Using an AC adaptor other than the one provided

may cause fire or damage to this unit.

23 Excessive sound pressure from earphones and

headphones can cause hearing loss.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

This unit is not disconnected from the AC power source

as long as it is connected to the wall outlet, even if this

unit itself is turned off by . In this state, this unit is

designed to consume a very small quantity of power.

ii En

En

Bluetooth

• Bluetooth is a technology for wireless

communication between devices within an area of

about 10 meters (33 ft) employing the 2.4 GHz

frequency band, a band which can be used without a

license.

• Bluetooth is a registered trademark of the Bluetooth

SIG and is used by Yamaha in accordance with a

license agreement.

Handling Bluetooth communications

• The 2.4 GHz band used by Bluetooth compatible

devices is a radio band shared by many types of

equipment. While Bluetooth compatible devices use

a technology minimizing the influence of other

components using the same radio band, such

influence may reduce the speed or distance of

communications and in some cases interrupt

communications.

• The speed of signal transfer and the distance at

which communication is possible differs according

to the distance between the communicating devices,

the presence of obstacles, radio wave conditions

and the type of equipment.

• Yamaha does not guarantee all wireless connections

between this unit and devices compatible with

Bluetooth function.

LASER SAFETY

This unit employs a laser. Due to possible eye injury,

only a qualified service person should remove the

cover or attempt to service this device.

DANGER

This unit emits visible laser radiation when open.

Avoid direct eye exposure to beam. When this unit is

plugged into the wall outlet, do not look inside the

unit through the disc slot and other openings.

◆ For U.K. customers

If the socket outlets in the home are not suitable for the

plug supplied with this appliance, it should be cut off and

an appropriate 3 pin plug fitted. For details, refer to the

instructions described below.

The plug severed from the mains lead must be destroyed, as a

plug with bared flexible cord is hazardous if engaged in a live

socket outlet.

◆ Special Instructions for U.K.

Model

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR

MOISTURE.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

• This unit’s speakers use magnets. Do not place items

that are sensitive to magnetism, such as CRT-type TVs,

clocks, credit cards, floppy disks, etc., on or beside this

unit.

• There is a chance that placing this unit too close to a

CRT-based (Braun tube) TV set might impair picture

color. Should this happen, move this unit away from the

TV set.

The laser component in this product is capable of

emitting radiation exceeding the limit for Class 1.

IMPORTANT

THE WIRES IN MAINS LEAD ARE

COLOURED IN ACCORDANCE WITH THE

FOLLOWING CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured

markings identifying the terminals in your plug,

proceed as follows:

The wire which is coloured BLUE must be

connected to the terminal which is marked with the

letter N or coloured BLACK. The wire which is

coloured BROWN must be connected to the

terminal which is marked with the letter L or

coloured RED.

Make sure that neither core is connected to the

earth terminal of the three pin plug.

iii En

Information for Users on Collection

and Disposal of Old Equipment and

Used Batteries

These symbols on the products, packaging,

and/or accompanying documents mean that

used electrical and electronic products and

batteries should not be mixed with general

household waste.

For proper treatment, recovery and

recycling of old products and used

batteries, please take them to applicable

collection points, in accordance with your

national legislation and the Directives

2002/96/EC and 2006/66/EC.

By disposing of these products and

batteries correctly, you will help to save

valuable resources and prevent any

potential negative effects on human health

and the environment which could

otherwise arise from inappropriate waste

handling.

For more information about collection and

recycling of old products and batteries,

please contact your local municipality,

your waste disposal service or the point of

sale where you purchased the items.

[Information on Disposal in other

Countries outside the European

Union]

These symbols are only valid in the

European Union. If you wish to discard

these items, please contact your local

authorities or dealer and ask for the correct

method of disposal.

Note for the battery symbol (bottom

two symbol examples):

This symbol might be used in combination

with a chemical symbol. In this case it

complies with the requirement set by the

Directive for the chemical involved.

If there should be color blotching or noise when

used near a TV, move this unit away from the TV

when using it.

Do not use this unit within 22 cm (9 inches) of

persons with a heart pacemaker implant or

defibrillator implant.

Radio waves may affect electro-medical devices.

Do not use this unit near medical devices or inside

medical facilities.

The user shall not reverse engineer, decompile,

alter, translate or disassemble the software used in

this unit, whether in part or in whole. For

corporate users, employees of the corporation

itself as well as its business partners shall observe

the contractual bans stipulated within this clause.

If the stipulations of this clause and this contract

cannot be observed, the user shall immediately

discontinue using the software.

We, Yamaha Music Europe GmbH hereby declare

that this unit is in compliance with the essential

requirements and other relevant provisions of

Directive 1999/5/EC.

Yamaha Music Europe GmbH

Siemensstr. 22-34 25462 Rellingen,

Germany

Tel: +49-4101-303-0

1 En

En

Various music sources that emphasize sound quality

• Play back music on external devices such as audio/data CDs, USB devices (USB flash drives), and those

connected via AUX, and tune in to the radio.

•By the Bluetooth technology, you can enjoy clear sound without wired connections (☞ P. 11).

• The 3-band equalizer (bass, middle, treble) can be set so that music sounds exactly how you want it

(☞ P. 15).

Convenient functions with enhanced usability

• One touch pairing (☞ P. 12).

• Storing/calling your five favorite radio stations easily.

• Charging smartphones, tablets, etc., via the USB port on the top panel.

Start your days with your favorite music (IntelliAlarm)

Use your favorite music or set of beeps as an alarm. The music you select is played at a volume of your own

choice at the set alarm time, giving you the best possible start to the day (☞ P. 16).

Easy operations using a dedicated application

By using the free application, “DTA CONTROLLER,” you can operate the unit on the application or use

various alarm features (☞ P. 2).

FEATURES

Supplied accessories

Power cable

AC adaptor

FM antenna

(DC 15 V, more

than 2.56 A

Model number:

EADP-38EB A)

USB cap

Keep the USB cap out of reach of

children so as to ensure that it is not

mistakenly swallowed.

Note

Remote control

(With CR2025 battery)

2 En

GETTING STARTED

INSTALLING “DTA

CONTROLLER”................................ 2

NAMES OF PARTS AND THEIR

FUNCTIONS .................................... 3

ADJUSTING THE CLOCK ............... 7

PLAYING MUSIC

LISTENING TO CD AND USB

DEVICE............................................ 8

LISTENING TO MUSIC FROM

YOUR Bluetoot h DEVICE .............. 11

LISTENING TO RADIO

STATIONS ..................................... 14

LISTENING TO EXTERNAL

SOURCE........................................ 15

TONE CONTROL........................... 15

OTHER FUNCTIONS AND

INFORMATION

USING ALARM FUNCTION............16

USING THE SLEEP TIMER............21

ADJUSTING BRIGHTNESS OF

FRONT PANEL DISPLAY...............21

TROUBLESHOOTING....................22

NOTES ON DISCS AND USB

DEVICES ........................................26

SPECIFICATIONS..........................27

 About this manual

• If both the unit and remote control buttons can be used to operate a feature, the manual will describe steps

using the buttons on the unit.

• indicates supplementary explanations for better use.

• y indicates precautions for use of the unit and its feature limitations.

Installing the DTA CONTROLLER application on a mobile device, such as a smartphone, iPhone, or tablet

computer, allows you to use a variety of additional convenient features of this unit.

Features

• Changing the source

• Controlling the volume and tone

• Setting of the alarm function (IntelliAlarm) (☞ P. 19)

• Playing back songs stored in a smartphone/iPhone/tablet computer.

Due to product improvements, specifications and appearance are subject to change without notice.

If you cannot access the above information, search for “DTA CONTROLLER” on App Store or Google Play.

CONTENTS

INSTALLING “DTA CONTROLLER”

The mobile device needs to be connected with the unit via Bluetooth connection (☞ P. 11).

Google Play

TM

http://itunes.com/app/dtacontroller

https://play.google.com/store/

apps/details?id=com.yamaha.av.

dtacontroller

Note

3 En

En

1 Infrared signal transmitter

2 (Power)

Press to turn on the system or enter standby mode.

3 Source buttons

Changes sources.

4 ALARM

Turns on/off the alarm.

5 SNOOZE/SLEEP

Sets snooze/sleep (☞ P. 18,

21

).

6 DIMMER

Adjusts the brightness of the front panel display

(

☞ P. 21).

7 /

•PRESET

Selects the preset radio station when using the

radio.

• FOLDER

Switches the playback folder during playback of

CDs or USB devices.

8 /

During playback: Skips the playback track/file.

Holding the button down while playing a track/file

will search backward/forward the track/file

(☞ P. 8).

During receiving radio: Tunes radio (☞ P. 14).

9

Play/pause.

0

/

Skips 10 tracks.

A

Stops playback.

B (Repeat)/ (Shuffle)

Plays music on an audio/data CD or USB device

in repeat/shuffle (

☞ P. 10).

C VOLUME /

Controls volume.

D MUTE

Mutes/resumes the sound.

Point the remote control at the remote control signal

receiver (on the front panel) and use within the range

shown below.

Replacing the remote control battery

While pushing the release tab in direction , slide

out the battery holder in direction .

NAMES OF PARTS AND THEIR FUNCTIONS

Remote control

Using the remote control

Within 6 m

(20’)

Battery insulation

sheet: Remove

before using.

1

2

3

CR2025

battery

 GETTING STARTED

NAMES OF PARTS AND THEIR FUNCTIONS

4 En

1 USB port

• Connect a USB device for playback (☞ P. 9).

• Supplies 5 V/1 A to a portable device, such as a

smartphone, when it is connected with a USB

cable (☞ P. 10).

2 NFC mark

Allows easy pairing with NFC technology

(☞ P. 12).

3 (Power)

Press to turn on the unit or enter standby mode.

Time is displayed on the front panel even when

the unit is in standby mode.

y

• Press and hold on the unit for more than 3 seconds

to set the unit to Eco Standby mode. No information on

the front panel is displayed in this mode. This can

reduce power consumption. To cancel Eco Standby

mode, press again.

• Even in standby mode or Eco Standby mode, the alarm

function is available.

4 DIMMER

Sets brightness of the front panel display

(☞

P. 21

)

.

y

When A (auto) is set, the brightness of the front panel

display is adjusted automatically depending on the

brightness of the room.

5 ALARM

Turns the alarm on/off (☞ P. 18).

6 SET

Use to configure the alarm setting (☞ P. 17,

20

).

7 SNOOZE/SLEEP

Sets the sleep timer or switches the alarm to

snooze mode (☞ P. 18,

21

).

8 TUNING ( / )

Skips the playback track/file, or tunes the radio.

Holding the button down while playing a track/file

will search backward/forward the track/file

(☞ P. 8,

14

).

9

Plays/pauses the track being played (☞ P. 8).

0

Stops playback.

A Disc slot

Insert a CD (☞ P. 8).

B

Ejects the CD (☞ P. 8).

Top panel

A (auto) 3 (brightest) 2 1 (darkest)

back to A

NAMES OF PARTS AND THEIR FUNCTIONS

5 En

En

1 Front panel display

Displays the clock and various information.

2 Illumination sensor

Measures surrounding illuminance. Do not cover

this sensor.

3 Source indicator

Shows the selected source.

4 SOURCE

Changes sources.

5 VOLUME

Controls volume.

6 PLAY indicator

Shuffle indicator

Repeat indicator

Shows playback status (☞ P. 9).

7 Preset indicator

Shows preset radio station number (☞ P. 14).

8 MEMORY

Memorizes radio stations (☞ P. 14).

9 EQ

Controls tone (☞ P. 15).

0 (Bluetooth)

Connect/disconnect Bluetooth devices (☞ P. 13).

A HEADPHONES

Connect headphones.

B PRESET

• During playing data CD/USB: Changes folders

(☞ P. 9).

• During receiving radios: Selects the preset radio

station (☞ P. 14).

Front panel

BLUETOOTH

 Auto Standby

• With the Auto Standby function, the unit behaves as described below when the unit is turned on (default

setting):

– This unit enters standby mode when playback of CD/USB is paused, when no signal is input from the

tuner or a connected device, or when playback continues at quite a low volume for a certain period of

time (about 20 minutes).

– This unit enters standby mode when no operation is performed for more than 8 hours.

• Activating/Deactivating Auto Standby

1 Plug in the unit while pressing and holding .

2 Keep holding .

The Auto Standby status changes, the , TUNING, SOURCE, VOLUME, and PRESET LEDs blink,

and the message is displayed on the front panel display.

– When activating Auto Standby: On

– When deactivating Auto Standby: Off

NAMES OF PARTS AND THEIR FUNCTIONS

6 En

1 FM antenna terminal

Connect the supplied FM antenna.

2 GND

Connect the cable core of the FM antenna (see

below).

3 AUX

Connect an external device (☞ P. 15).

4 15V

Connect the supplied AC adaptor and power

cable.

5 ALARM TYPE

Sets the alarm type of the IntelliAlarm function

(☞ P. 17).

6 CLOCK

Adjusts the clock (☞ P. 7).

It is recommended to connect the FM antenna to the GND terminal before connecting to the FM antenna

terminal.

Rear panel

Connecting the FM antenna

1 Remove insulation and twist

the edge of the cord.

2 Fully unscrew the GND terminal, then wind the

cord inside the ring part of the GND terminal.

3 Tighten the GND terminal taking care

not to slip the cord off from the

terminal.

Ring

GND

4 Connect the supplied FM antenna to the unit.

FM antenna

GND cable

FM antenna

ADJUSTING THE CLOCK

7 En

En

1 Set CLOCK to SET.

2 Set the time.

Set the time with PRESET.

y

•Press SNOOZE/SLEEP in step 2 to switch between

the 12 and 24 hour clock display.

• The “PM” indicator will be shown only when you

select the 12 hour clock display.

3 Set CLOCK to LOCK to complete.

At the time LOCK is set, it will be 00 second and

time count starts.

The time settings are lost about one week after unplugging

the unit.

ADJUSTING THE CLOCK

• The antenna should be stretched out.

• If you use an outdoor antenna instead of the supplied antenna,

reception will be better.

• If radio reception is poor, change the height, direction, or

placement of the antenna.

• If you listen to an FM radio station while USB charging, noise

may interfere with the radio reception. In this case, disconnect

the USB cable from the unit.

Note

5 Pin the antenna where the best reception is obtained.

2

1c

Rear panel

Front panel

PRESET

Note

8 En

Use the following buttons to control the unit while playing back tracks on CD/USB devices.

 Listening to CD

LISTENING TO CD AND USB DEVICE

The unit will operate as follows when playing back tracks/files on CD/USB devices.

• If the CD/USB device being played back is stopped, the track that was being played back will start

playing from the beginning of the track the next time playback begins.

• If you press on the remote control while playback is stopped, the next time playback begins, the unit

will play tracks as follows:

– For audio CD: from the first track of the CD.

– For data CD/USB device: from the first track of the folder that contains the track that was played

last.

• When Auto Standby is activated, this unit enters standby mode automatically if no operation is performed

for 20 minutes after CD/USB device playback is stopped.

y

For details on playable discs and files, refer to “NOTES ON DISCS AND USB DEVICES” (☞ P. 26).

Button Function

Top

panel/

Remote

control

Play/Pause

/

Skip

Search backward/forward

(press and hold down)

Stop

Top

panel

Eject the CD

Button Function

Remote

control

Repeat playback (☞ P. 3)

Shuffle playback (☞ P. 3)

/ Skip 10 tracks/files

/ Change folders to play

(only for data CDs or USB

devices)

1 Set SOURCE to CD.

2 Insert the CD into the disc slot with the

label side facing toward the front of the

unit.

Playback starts automatically. Playback

operations are available with the remote control

or this unit.

• Insert the CD with the label side facing toward the front

of the unit.

• CDs cannot be inserted or ejected when the system is in

Eco Standby mode (☞ P. 4).

2

1

Top/front panel

SOURCE

Label side

Note

 PLAYING MUSIC

LISTENING TO CD AND USB DEVICE

9 En

En

 Listening to USB device

1 Set SOURCE to USB.

2 Connect a USB device.

Playback starts automatically. Playback

operations are available with the remote control

or this unit.

y

Stop playback before disconnecting the USB device.

 Display information

2

1

Top/front panel

SOURCE

Playing back audio CD

Track number

Playing back data CD/USB device

Folder number

File number

Front panel

Track or folder and file numbers appear for a

while when playback starts.

y

Skip folders to select the desired one with

PRESET while the data CD/USB device is

played back.

LISTENING TO CD AND USB DEVICE

10 En

The playback mode can be checked with the play/shuffle/repeat indicator on the front panel display.

y

If the selected source contains folders, the playback mode of

repeat/shuffle can also be set by folder.

 Repeat playback

Press (Repeat) on the remote control to select a

playback mode from the following.

:1 track

:

All tracks within the folder (data CD/USB device

only)

:All tracks

No display:Repeat mode off

 Shuffle playback

Press (Shuffle) on the remote control to select a

playback mode from the following.

:

All tracks within the folder (data CD/USB device

only)

:All tracks

No display:Shuffle mode off

Repeat/shuffle playback

Repeat

Shuffle

Remote control

• Charging may not be possible depending on the portable

device.

• This unit does not support iPad charging.

• The power is supplied while the unit is turned on (no

matter what source is selected), even in standby mode.

• Yamaha will not be held responsible for any damage to the

portable device or data loss occurred while using this unit.

• Disconnect the USB cable immediately after charging

completes, since power continues to be supplied to the

connected device.

Note

Top panel

USB cable from

portable device

 Notes about power supply via the USB port

Supplies 5 V/1 A to a portable device, such as a smartphone, when it is connected with a USB cable.

11 En

En

This unit provides Bluetooth functionality. You can enjoy wireless music playback from your Bluetooth device

(smartphone, digital audio player, etc.). Please also refer to the owner’s manual of your Bluetooth device.

Pairing is an operation that registers the communicating device (hereafter called “the connecting device”) with

this unit. You’ll need to perform the pairing operation the first time you use your Bluetooth device with this

unit, or if the pairing settings have been deleted. Once pairing has been completed, subsequent reconnection

will be easy even after the Bluetooth connection is disconnected. If pairing is not successful, refer to the item

“Bluetooth” in “TROUBLESHOOTING” (☞ P. 24).

y

• This unit can be paired with up to eight connecting devices. When pairing with the ninth device has succeeded, pairing data

for the device with the oldest connection date will be deleted.

• If this unit is connected via B luetooth to another device, disconnect the Bluetooth connection before you perform the pairing

operation (☞ P. 13).

Yamaha does not guarantee all connections between this unit and Bluetooth device.

LISTENING TO MUSIC FROM YOUR Bluetooth DEVICE

Pairing this unit with your Bluetooth device

1 Press to turn on the unit.

2 Set SOURCE to BLUETOOTH.

 If using an iPod touch/iPhone/iPad

3 On your iPod touch/iPhone/iPad, turn

[Settings] [Bluetooth] on.

The Bluetooth connection list will appear in

[Devices]. (This procedure or display may

differ depending on the type of your iPod touch/

iPhone/iPad.)

4 From the Bluetooth connection list of the

connecting device, choose this unit

(TSX-B141 Yamaha).

When pairing has been completed, your iPod

touch/iPhone/iPad will indicate “Connected”.

The Bluetooth indicator on the front panel

display of this unit will light.

 If using other than an iPod touch/

iPhone/iPad

3 Perform Bluetooth pairing on the

connecting device.

For details refer to the owner’s manual of the

connecting device.

4 From the Bluetooth connection list of the

connecting device, choose this unit

(TSX-B141 Yamaha).

When pairing has been completed, the

Bluetooth indicator on the front panel display of

this unit will light for about 1 second.

y

If you are asked to enter a password, enter the

numerals “0000”.

Note

2

Front panel

Bluetooth indicator

SOURCE

TSX-B141 Yamaha

PIN 0 0 0 0

1

4

789

0

2

5

3

6

LISTENING TO MUSIC FROM YOUR Bluetooth DEVICE

12 En

 Easy pairing

For the smartphone with NFC (Near Field Communication) function, you can easily perform the pairing

operation just by holding the smartphone over the NFC mark (you need to turn the unit on and turn on the NFC

function of the smartphone beforehand).

1 Press to turn the unit on.

2 Hold the smartphone over the NFC mark.

3 Perform the pairing operation at the

smartphone (for details, please read the

owner’s manual of the smartphone).

This unit is indicated as “TSX-B141 Yamaha”

on the smartphone.

y

• If you are prompted for a passkey, enter the numerals

“0000”.

• If the connection fails, move the smartphone slowly

on the NFC mark.

• If the smartphone is equipped with a case, remove

the case.

Listening to a Bluetooth device

1 Set SOURCE to BLUETOOTH.

2 Connect this unit and your connecting

device via Bluetooth.

3 Play back music from your Bluetooth

device.

Take care that the volume setting of this unit is not too high.

y

• If you connect via Bluetooth from your connecting device

and play back music while the unit is in standby mode, the

unit will automatically turn on.

• If you disconnect the Bluetooth connection from your

connecting device while the playback source is set to

Bluetooth, the unit will automatically enter standby mode.

• If the Auto Standby is enabled and Bluetooth is selected

as the playback source, 20 minutes with no Bluetooth

connection and no operation makes the unit enter standby

mode automatically.

NFC

mark

Top panel

1

Front panel

SOURCE

Note

LISTENING TO MUSIC FROM YOUR Bluetooth DEVICE

13 En

En

Once pairing has been completed, connecting a Bluetooth will be easy the next time.

 Connecting from this unit

 Connecting from the connecting device

1 In the Bluetooth settings of the connecting device, turn Bluet ooth on.

2 From the Bluetooth connection list of the connecting device, choose this unit (TSX-B141

Yamaha).

The Bluetooth connection will be established, and the Bluetooth indicator on the front panel display of this

unit will light.

 Connecting with the NFC function

When using an already-paired smartphone with the NFC function, holding it over the NFC mark establishes a

Bluetooth connection.

Bluetooth connections cannot be established from the connecting device when this unit is in Eco Standby

mode. Turn the unit on.

If any of the following operations are performed while a Bluetooth connection is established, the Bluetooth

connection will be disconnected.

• Press the (Bluetooth) button on the unit. (Or hold down on the remote control.)

• Set the unit to standby mode.

• Turn off the Bluetooth setting of the connecting device.

• Hold the smartphone with the NFC function over the NFC mark during Bluetooth connection.

Connecting an already-paired device via Bluetooth

Follow procedure or below to connect the

device.

Set SOURCE to BLUETOOTH.

Press the (Bluetooth) button on the right

side of the front control panel.

The Bluetooth indicator will blink on the front panel

display; this unit will search for the connecting

device that was most recently connected via

Bluetooth, and will then establish a connection (You

must first turn on the Bluetooth setting of the

connecting device).

When the Bluetooth connection has been

established, the Bluetooth indicator will light.

Disconnecting a Bluetooth connection

Front panel

Bluetooth indicator

SOURCE

( Bluetooth)

button

A B

A

B

Note

14 En

You can store 5 favorite FM stations with the preset function.

LISTENING TO RADIO STATIONS

Tuning radio stations

1 Set SOURCE to FM.

2 Press / to tune the FM station.

If you tune to an FM station manually, the sound will be in

monaural.

Storing FM stations (preset)

1 Tune into a favorite radio station.

2 Press MEMORY.

3 Select the preset number you want to store

to with PRESET.

y

To cancel the preset, press TUNING again.

4 Press MEMORY to complete.

Presetting completes.

Selecting preset radio stations

1 Set SOURCE to FM.

2 Select the preset radio station with

PRESET.

(Or press / on the remote control.)

2

1

Top/front panel

TUNING

SOURCE

Tuning type Operation of TUNING

Automatic tuning

Press and hold down

or .

Manual tuning

Press or

repeatedly.

Note

3

24

Front panel

PRESET

MEMORY

Front panel

21

SOURCE

PRESET

15 En

En

LISTENING TO EXTERNAL SOURCE

Set the unit to standby mode before connecting

audio cables.

1 Connect external audio device to AUX on

the rear panel using a commercially

available 3.5 mm (1/8 in) stereo mini plug

cable.

Turn down the volume of the unit and your external

audio device before connection.

2 Press to turn the unit on.

3 Set SOURCE to AUX.

4 Start playback on the connected external

audio device.

TONE CONTROL

1 Press EQ during playback.

LOW, MID and HIGH flash.

2 Adjust the tone with LOW, MID and

HIGH.

Each tone can be adjusted from –5 to +5.

3 Press EQ to complete.

Rear panel

Top/front panel

1

2

3

SOURCE

Note

Front panel

2

13

LOW, MID, HIGH

EQ

 USING THE ALARM

16 En

The unit includes an alarm function (IntelliAlarm) that plays back music sources or set of beeps (built-in alarm)

at the set time in a variety of different methods. The alarm function has following features.

 3 types of alarms

Select from 3 alarm types, combining music and beep sounds.

 Music sources

Audio CD, data CD, USB device and radio can be selected. The following can also be selected depending on

the audio source:

 Snooze

The snooze function can be enabled to replay the alarm after 5 minutes (☞ P. 18).

USING ALARM FUNCTION

IntelliAlarm

SOURCE + BEEP

The selected audio source and beep sound are played at the set time. This mode is

recommended for the best possible start to the day.

3 minutes before the set time: the source music begins to fade in and the volume gradually

increases as the alarm time approaches.

Alarm time: a beeping sound also begins playing.

SOURCE

The selected audio source is played at the set time. The volume fades in gradually and

increases to the set volume.

BEEP

Only beep sound is played back at the set time.

Source Playback method Function

Audio CD

Track The selected track is played repeatedly.

Resume The track you listened to last time is played back.

Data CD/USB

Folder The selected folder is played repeatedly.

Resume The track you listened to last time is played back.

FM radio

Preset station The selected preset radio station is played.

Resume The radio station you listened to last time is played back.

La pagina sta caricando ...

Yamaha TSX-B141 Brick Manuale utente

Yamaha TSX-B141 Brick Manuale utente

in altre lingue

Documenti correlati

Altri documenti