Yamaha TSX-B72 Manuale del proprietario

Marca: Yamaha

Modello: TSX-B72

Categoria: Sveglie

Tipo: Manuale del proprietario

ULV

OWNER'S MANUAL

MODE D'EMPLOI

MANUAL DE INSTRUCCIONES

En Fr Es

i En

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8 Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug has

two blades and a third grounding prong. The wide blade

or the third prong are provided for your safety. If the

provided plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

11 Only use attachments/accessories specified by the

manufacturer.

12 Use only with the cart, stand, tripod,

bracket, or table specified by the

manufacturer, or sold with the apparatus.

When a cart is used, use caution when

moving the cart/apparatus combination to

avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or when

unused for long periods of time.

14 Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug

is damaged, liquid has been spilled or objects have fallen

into the apparatus, the apparatus has been exposed to rain

or moisture, does not operate normally, or has been

dropped.

Yamaha and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out

of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without

annoying blaring or distortion – and, most importantly, without affecting your sensitive hearing. Since hearing

damage from loud sounds is often undetectable until it is too late, Yamaha and the Electronic Industries

Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive

volume levels.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

RISK OF ELECTRIC SHOCK DO

NOT OPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

• Explanation of Graphical Symbols

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to

alert you to the presence of uninsulated

“dangerous voltage” within the product’s

enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral

triangle is intended to alert you to the

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

IMPORTANT

Please record the serial number of this unit in the space

below.

MODEL:

Serial No.:

The serial number is located on the rear of the unit. Retain

this Owner’s Manual in a safe place for future reference.

We Want You Listening For A Lifetime

ii En

IMPORTANT SAFETY INSTRUCTIONS

FCC INFORMATION (for US customers)

1 IMPORTANT NOTICE: DO NOT MODIFY THIS

UNIT!

This product, when installed as indicated in the

instructions contained in this manual, meets FCC

requirements. Modifications not expressly approved

by Yamaha may void your authority, granted by the

FCC, to use the product.

2 IMPORTANT: When connecting this product to

accessories and/or another product use only high

quality shielded cables. Cable/s supplied with this

product MUST be used. Follow all installation

instructions. Failure to follow instructions could void

your FCC authorization to use this product in the

USA.

3 NOTE: This product has been tested and found to

comply with the requirements listed in FCC

Regulations, Part 15 for Class “B” digital devices.

Compliance with these requirements provides a

reasonable level of assurance that your use of this

product in a residential environment will not result in

harmful interference with other electronic devices.

This equipment generates/uses radio frequencies and,

if not installed and used according to the instructions

found in the users manual, may cause interference

harmful to the operation of other electronic devices.

Compliance with FCC regulations does not guarantee

that interference will not occur in all installations. If

this product is found to be the source of interference,

which can be determined by turning the unit “OFF”

and “ON”, please try to eliminate the problem by

using one of the following measures:

Relocate either this product or the device that is being

affected by the interference.

Utilize power outlets that are on different branch

(circuit breaker or fuse) circuits or install AC line

filter/s.

In the case of radio or TV interference, relocate/

reorient the antenna. If the antenna lead-in is 300 ohm

ribbon lead, change the lead-in to coaxial type cable.

If these corrective measures do not produce

satisfactory results, please contact the local retailer

authorized to distribute this type of product. If you can

not locate the appropriate retailer, please contact

Yamaha Corporation of America A/V Division, 6600

Orangethorpe Avenue, Buena Park, CA 90620, USA.

The above statements apply ONLY to those products

distributed by Yamaha Corporation of America or its

subsidiaries.

FCC CAUTION

Change or modifications not expressly approved by the

party responsible for compliance could void the user’s

authority to operate the equipment.

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug to

wide slot and fully insert.

CAN ICES-3 (B)/NMB-3(B)

• This device complies with Part 15 of the FCC Rules and RSSGen of IC Rules.

• Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device

must accept any interference received including interference that may cause undesired operation of this device.

See the “TROUBLESHOOTING” section at the end of this manual if interference to radio reception is suspected.

NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

This equipment compiles with FCC/IC radiation exposure limits set forth for uncontrolled equipment and meets the FCC

radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF)

Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive

exposure evaluation (MPE). But it is desirable that it should be installed and operated with at least 20 cm and more between

the radiator and person’s body (excluding extremities: hands, wrists, feet and ankles).

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

iii En

1 To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

2 Install this unit in a well ventilated, cool, dry, clean

place - away from direct sunlight, heat sources,

vibration, dust, moisture and cold. For proper

ventilation, allow the following minimum clearances.

Top: 15 cm (6 in)

Rear: 10 cm (4 in)

Sides: 10 cm (4 in)

3 Locate this unit away from other electrical

appliances, motors, or transformers to avoid

humming sounds.

4 Do not expose this unit to sudden temperature

changes from cold to hot, and do not locate this unit

in an environment with high humidity (i.e. a room

with a humidifier) to prevent condensation inside this

unit, which may cause an electrical shock, fire,

damage to this unit, and/or personal injury.

5 Avoid installing this unit where foreign object may

fall onto this unit and/or this unit may be exposed to

liquid dripping or splashing. On the top of this unit,

do not place:

– Other components, as they may cause damage

and/or discoloration on the surface of this unit.

– Burning objects (i.e. candles), as they may cause

fire, damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall

and liquid may cause electrical shock to the user

and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth,

curtain, etc. in order not to obstruct heat radiation. If

the temperature inside this unit rises, it may cause

fire, damage to this unit, and/or personal injury.

7 Do not plug in this unit to a wall outlet until all

connections are complete.

8 Do not operate this unit upside-down. It may

overheat, possibly causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cable from the wall

outlet, grasp the plug; do not pull the cable.

11 Do not clean this unit with chemical solvents; this

might damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used.

Using this unit with a higher voltage than specified is

dangerous and may cause fire, damage to this unit,

and/or personal injury. Yamaha will not be held

responsible for any damage resulting from use of this

unit with a voltage other than specified.

13 To prevent damage by lightning, keep the power

cable disconnected from a wall outlet or this unit

during a lightning storm.

14 Do not attempt to modify or fix this unit. Contact

qualified Yamaha service personnel when any

service is needed. The cabinet should never be

opened for any reasons.

15 When not planning to use this unit for long periods of

time (i.e. vacation), disconnect the AC power plug

from the wall outlet.

16 Be sure to read the “TROUBLESHOOTING” section

on common operating errors before concluding that

this unit is faulty.

17 Before moving this unit, press to set the system to

off, and disconnect the AC power plug from the wall

outlet.

18 Condensation will form when the surrounding

temperature changes suddenly. Disconnect the power

cable from the outlet, then leave this unit alone.

19 When using this unit for a long time, this unit may

become warm. Turn the system off, then leave this

unit alone for cooling.

20 Install this unit near the wall outlet and where the AC

power plug can be reached easily.

21 Be sure to use the AC adaptor supplied with this unit.

Using an AC adaptor other than the one provided

may cause fire or damage to this unit.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

This unit is not disconnected from the AC power source

as long as it is connected to the wall outlet, even if this

unit itself is turned off by . In this state, this unit is

designed to consume a very small quantity of power.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR

MOISTURE.

There is a chance that placing this unit too close to a

CRT-based (Braun tube) TV set might impair picture

color. Should this happen, move this unit away from the

TV set.

Do not use this unit within 22 cm (9 inches) of persons

with a heart pacemaker implant or defibrillator implant.

Radio waves may affect electro-medical devices.

Do not use this unit near medical devices or inside

medical facilities.

1 En

PREPARATION

■ Features

– High quality playback of Bluetooth enabled smartphone/tablet computer, and radio and external devices.

One touch pairing enabled by NFC technology.

– Firm bass sound and spacious stereo sound from 2.1 ch powered speaker (tweeter × 2, woofer × 1),

SR-Bass™ (Yamaha Swing Radiator Bass technology) and DSP in a compact unit.

– Easy user-intuitive interface by buttons with Guide LED and knob dials.

– Convenient operability enabled by using iPhone/Android smartphone as a remote control.

Supports the dedicated application, “DTA CONTROLLER.”

– USB port for supplying power.

• indicates precautions for use of the unit and its feature limitations.

• indicates supplementary explanations for better use.

■ Supplied accessories

NAMES OF PARTS AND THEIR FUNCTIONS .................................................................................... 2

BASIC FUNCTIONS................................................................................................................................... 4

USING USEFUL FUNCTIONS ................................................................................................................. 6

LISTENING TO RADIO STATIONS....................................................................................................... 8

CHARGING WITH THE USB PORT ......................................................................................................9

LISTENING TO EXTERNAL SOURCES ............................................................................................... 9

LISTENING TO MUSIC FROM YOUR Bluetooth COMPONENT ................................................... 10

TROUBLESHOOTING ............................................................................................................................ 13

SPECIFICATIONS ................................................................................................................................... 15

Note

AC adaptor Power cable

(DC 15 V, 2.56A,

model number:

EADP-38EB A)

AM Antenna

(U.S.A. and Canada

models only)

USB cap

Note

Keep the USB cap out of reach

of children so as to ensure that

it is not mistakenly swallowed.

CONTENTS

2 En

■ Front panel

■ Top panel

NAMES OF PARTS AND THEIR FUNCTIONS

1 Front panel display

2 SOURCE: Bluetooth, AUX, RADIO

3 VOLUME: Volume control

4 PRESET: Stores up to five favorite FM (all models)

and five AM (U.S.A. and Canada models only) radio

stations (☞ P. 8).

5 Illumination sensor: Measures surrounding

illuminance. Do not cover this sensor when

DIMMER (E) is set to A (auto).

6 CHARGING: Supplies 5V/2.1A to a portable

device, such as a smartphone, when it is connected

with a USB cable (☞ P. 9).

7 (Bluetooth): Press this button:

– to terminate Bluetooth connection when it is

established (☞ P. 12).

– to establish connection with the component that

was most recently connected via Bluetooth

(☞ P. 12).

8 : Press to turn the system on/off.

Time is displayed even when the system is off.

• Press and hold for more than 3 seconds to set the

system to standby mode. All the information on the

front panel display is not displayed in standby mode.

This can reduce power consumption. To cancel standby

mode, press .

• Even in system off/standby mode, the alarm function is

available.

NAMES OF PARTS AND THEIR FUNCTIONS

3 En

■ Rear panel

9 ALARM: Alarm on/off (☞ P. 5)

0 SET: Alarm setting (☞ P. 4)

A NFC mark: Allows easy pairing with NFC

technology (☞ P. 11).

B SNOOZE/SLEEP (☞ P. 5)

C FM, AM: Switches FM/AM

(U.S.A. and Canada models only)

D MEMORY (☞ P. 8)

E DIMMER: Sets the brightness of the top and front

panel

A (auto) 3 (brightest) 2 1 (darkest)

back to A

When A (auto) is set, the brightness of the top and front

panel is adjusted automatically according to the

brightness of the room.

F TUNING (☞ P. 8)

■ Extending rod antenna

■ Connecting the AM Antenna

(U.S.A. and Canada models only)

15V : Connect the supplied

AC adaptor and power cable.

AUX: Connect an external

device. (☞ P. 9)

FM Rod Antenna

(See below.)

ALARM TYPE switch (☞ P. 4)

CLOCK switch (☞ P. 4)

AM Antenna

terminal

(U.S.A. and

Canada models

only. See

below.)

• When you listen to FM, extend the

antenna.

• If FM reception is poor, change the

height or direction of the antenna, or

relocate the unit.

Notes

FM Rod Antenna

Assembling

AM Antenna

• Place the antenna in a location with good signal reception.

• Signal reception may be inadvertently affected if a digital device is

located near the antenna.

Notes

4 En

OPERATION

This unit can play back radio and/or beep sound at the set time.

■ Setting the time and sound

BASIC FUNCTIONS

Adjusting the clock

A Set CLOCK to SET.

B Set the time with TUNING.

C Set CLOCK to LOCK.

The time settings are lost approximately one

week after unplugging the unit.

Alarm setting

A Press SET.

B Set the alarm time with

TUNING.

An alarm will sound only once at the

specified time.

C Set ALARM TYPE.

• SOURCE+BEEP: radio (played

back from 3 minutes before the

alarm time) and beep sound (played

back at the alarm time)

• SOURCE: this unit plays back the

radio station you listened to last

time.

• BEEP: beep sound only

D Set the alarm volume.

E Press SET.

Alarm is set and the alarm indicator

( ) lights up.

Rear panel

Front panel display

flashes.

Note

Alarm indicator ( )

flashes and the front

panel display indicates

alarm mode.

Rear panel

BASIC FUNCTIONS

5 En

■ Switching the alarm on/off

At the set time, alarm sound plays back. During playback, operations below are available.

■ Using the snooze function

■ Stopping the alarm

You can set the time until the system turns off automatically when the sleep function is set to on.

Press ALARM.

When the alarm is on, the alarm

indicator ( ) lights up and alarm

time is displayed for a while.

Operations during playing back alarm sound

Press SNOOZE/SLEEP.

The alarm sound stops and resumes

after 5 minutes.

•If SOURCE+BEEP is set as the alarm type,

you can press SNOOZE/SLEEP once to

stop the beep sound, and twice to stop the

audio source. Five minutes after the audio

source is stopped, it will start fading in again

and the beep sound will resume.

• When the snooze function is activated, alarm

indicator flashes.

Press ALARM or .

• Unless you stop the alarm, the alarm stops

after 60 minutes automatically.

• When you stop the alarm, the alarm time

setting, etc., is saved for convenient use next

time.

Sleep setting

Select the sleep time.

You can set 30, 60, 90 or 120 minutes.

When the sleep function is on, the

sleep indicator ( ) lights up.

To cancel the sleep function, press SNOOZE/

SLEEP.

Sleep indicator ( ) and front

panel display flash.

Press repeatedly.

6 En

OPERATION

• If you cannot access the above information, search for “DTA CONTROLLER” on App Store or Google Play.

• iPad, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.

• Android and Google Play are trademarks of Google, Inc.

USING USEFUL FUNCTIONS

DTA CONTROLLER

With the DTA CONTROLLER application installed on your smartphone or tablet

computer, you can use further convenient features of Yamaha desktop audio systems.

To download the application, or obtain the latest information on it, access App Store or

Google Play via the QR codes listed below.

iPhone, iPad, iPod touch Android™

http://itunes.com/app/dtacontroller https://play.google.com/store/apps/

details?id=com.yamaha.av.dtacontr

oller

(U.S.A.)

https://itunes.apple.com/us/app/dta-

controller-us/id549333293?mt=8

Notes

USING USEFUL FUNCTIONS

7 En

Once you have set Weekly Alarm by “DTA CONTROLLER”, you can select the Weekly Alarm mode in the

alarm mode select display of this unit.

Alarm setting using DTA CONTROLLER

The Weekly Alarm mode cannot be selected

when all the days of the Weekly Alarm setting

are turned off. Turn on any day of the Weekly

Alarm setting.

A Press SET.

B Select the alarm mode with

TUNING.

C Press SET.

• If you have chosen Weekly Alarm

mode, this completes the alarm

setting. The alarm indicator ( )

and the Weekly Alarm indicator

( ) will light up.

D Set the alarm time with

TUNING.

E Set ALARM TYPE.

F Set the alarm volume.

G Press SET.

Alarm is set and the alarm indicator

( ) lights up.

The alarm setting will be saved even if the

alarm is turned off.

If the alarm is turned on again by pressing

ALARM, the alarm will sound with the

previous alarm settings.

1d (One Day Alarm mode):

An alarm that sounds only once at the

specified time.

7d (Weekly Alarm mode):

An alarm whose time can be specified

for each day of the week (settable

only using “DTA CONTROLLER”).

One Day Alarm

Weekly Alarm

Note

One Day Alarm

Weekly Alarm

Alarm indicator ( )

flashes and the front

panel display indicates

alarm mode.

Rear panel

8 En

You can store up to five favorite FM (all models) and five AM (U.S.A. and Canada models only) radio stations

with the preset function.

LISTENING TO RADIO STATIONS

Tuning radio stations

A Set SOURCE to RADIO.

B Select FM/AM.

(U.S.A. and Canada models only)

C For automatic tuning, press

and hold TUNING.

For manual tuning, press

TUNING repeatedly.

If you tune to a station manually during FM

reception, the sound is monaural.

Presetting radio stations

A Tune into a favorite radio

station.

B Press MEMORY.

C Select the PRESET number

you want to store to.

To cancel the preset, press TUNING again.

D Press MEMORY to complete.

Selecting preset radio stations

A Set SOURCE to RADIO.

B Select FM/AM.

(U.S.A. and Canada models only)

C Select the preset radio station

with PRESET.

(U.S.A. and Canada

models only)

Note

(U.S.A. and Canada

models only)

9 En

Connecting a portable device such as a smartphone or tablet computer to the USB port on this unit charges the

connected device (power supply of up to 5V/2.1A is supported).

Prepare a USB cable that is compatible with the portable device and confirm that the device is supported for

charging via USB connection before use. In addition, read the documentation provided with the portable

device.

■ Playing back

CHARGING WITH THE USB PORT

Connect your portable device

to the USB port on this unit

using a commercially available

USB cable.

Charging automatically starts.

B Disconnect the USB cable

from the unit when charging

completes.

Check the charging status on the

portable device.

• Charging may not be possible depending on

the portable device.

• The USB port is for charging use only. The

USB port does not support audio playback.

• In standby mode, power supply stops, and

charging is not available.

• This unit does not function as memory

storage.

• Yamaha will not be held responsible for any

damage to the portable device or data loss

occurred while using this unit.

• Disconnect the USB cable immediately after

charging completes, since power continues to

be supplied to the connected device.

LISTENING TO EXTERNAL SOURCES

Playing back external sources

A Connect your portable audio

device to AUX using a

commercially available 3.5 mm

(1/8 in) mini plug cable.

Turn down the volume of this unit and your

portable audio device before connection.

B Set SOURCE to AUX.

Start playback on the connected

portable audio device.

USB cable from portable device

Top panel

Notes

Rear panel

Note

10 En

This unit provides Bluetooth functionality. You can enjoy wireless music playback from your Bluetooth

component (smartphone, digital audio player, etc.). Please also refer to the owner’s manual of your Bluetooth

component.

Install in a stable place, being careful of the following points:

• Do not place on top of steel or other metal plates.

• Do not cover with a cloth, etc.

• Install in the same room as the device with which signals are to be exchanged (Bluetooth profile A2DP

compatible portable music player, mobile phone, etc.) within a direct, line-of-sight distance of 10 m (33 ft).

• Make sure there are no obstacles between this unit and the Bluetooth component.

Pairing is an operation that registers the communicating component (subsequently called “the other

component”) with this unit. You will need to perform the pairing operation the first time you use your

Bluetooth component with this unit, or if the pairing settings have been deleted. Once pairing has been

completed, subsequent reconnection will be easy even after the Bluetooth connection is disconnected. If pairing

is not successful, refer to the item “Bluetooth” in “TROUBLESHOOTING” (☞ P. 13).

• This unit can be paired with up to eight other components. When pairing with the ninth component has succeeded, pairing

data for the component with the oldest connection date will be deleted.

• If this unit is connected via Bluetoot h to another component, press (Bluetooth) on this unit to disconnect the Bluetooth

connection before you perform the pairing operation.

■ If using an iPhone/iPad/iPod touch

LISTENING TO MUSIC FROM YOUR Bluetooth COMPONENT

Installation

Within 10 m (33 ft)

Pairing this unit with your Bluetooth component

Set

SOURCE

to (Bluetooth).

B On your iPhone/iPad/iPod

touch, turn [Settings]

[Bluetooth] on.

The Bluetooth connection list will

appear in [Devices].

(This procedure or display may differ

depending on the type of your iPhone/

iPad/iPod touch.)

C From the Bluetooth connection

list of the other component,

choose this unit (TSX-B72

Yamaha).

When pairing has been completed,

your iPhone/iPad/iPod touch will

indicate “Connected”.

The Bluetooth indicator on the front

panel display of this unit will light.

Bluetooth indicator

ABC

LISTENING TO MUSIC FROM YOUR Bluetooth COMPONENT

11 En

■ If using other than an iPhone/iPad/iPod touch

A Set SOURCE to (Bluetooth).

B Perform Bluetooth pairing on the other component.

For details, refer to the owner’s manual of the other component.

C From the Bluetooth connection list of the other component, choose this unit (TSX-B72

Yamaha).

When pairing has been completed, the Bluetooth indicator on the front panel display of this unit will light

for about 1 second.

If you are prompted for a passkey, enter the numerals “0000”.

■ Easy pairing

For the smartphone with NFC (Near Field Communication) function, you can easily perform the pairing

operation just by touching the NFC mark on this unit with your smartphone (you need to turn the system on and

turn on the NFC function of the connecting component beforehand).

Press to turn the system on.

B Perform the pairing operation

at the connecting component

(for details, please read the

owner’s manual of the

connecting component).

This unit is indicated as “TSX-B72

Yamaha” on the connecting

component.

• If you are prompted for a passkey, enter the

numerals “0000”.

• If the connection fails, move the

smartphone slowly on the NFC mark.

• If the smartphone is equipped with a case,

remove the case.

NFC

mark

LISTENING TO MUSIC FROM YOUR Bluetooth COMPONENT

12 En

Once pairing with a component has been completed, connecting with that component via Bluetooth will be

easy next time.

■ Connecting from this unit

Set SOURCE to (Bluetooth).

The Bluetooth indicator will blink on the front panel display; this unit will search for the other component

that was most recently connected via Bluetooth, and will then establish a connection (You must first turn on

the Bluetooth setting of the other component).

When the Bluetooth connection has been established, the Bluetooth indicator will light.

Yamaha does not guarantee all connections between this unit and Bluetooth component.

Pressing (Bluetooth) on the top panel of this unit also establishes connection with the component that was most recently

connected via Bluetooth; however, SOURCE is not automatically set to (Bluetooth).

■ Connecting from the other component

A In the Bluetooth settings of the other component, turn Bluetooth on.

B From the Bluetooth connection list of the other component, choose this unit (TSX-B72

Yamaha).

The Bluetooth connection will be established, and the Bluetooth indicator on the front panel display of this

unit will light.

Bluetooth connections cannot be established from the other component when this unit is in standby mode. Turn the system on.

If any of the following operations are performed while a Bluetooth connection is being used, the Bluetooth

connection will be disconnected.

• Press (Bluetooth) on the top panel of this unit.

• Turn the system off.

• Turn off the Bluetooth setting of the other component.

Listening to a Bluetooth component

Set

SOURCE

to (Bluetooth).

B Connect this unit and your other

component via Bluetooth.

C Play back music from your Bluetooth

component.

Take care that the volume setting of this unit is not too high. We

recommend that you adjust the volume on the other component.

• While the system is turned off, if you connect a Bluetooth

component to the unit and play back music, the system will

automatically turn on.

• If you disconnect the Bluetooth connection from your other

component while the playback source is set to Bluetooth, this

unit will automatically turn off the system.

•If Bluetooth is selected as the playback source, this unit will

automatically turn off the system when 60 minutes have

elapsed without any Bluetooth connection nor any operation

performed.

Connecting an already-paired component via Bluetooth

Bluetooth

indicator

Note

Disconnecting a Bluetooth connection

13 En

Refer to the table below if the unit does not operate properly. If the problem you are experiencing is not listed

below, or if the instruction below does not help, turn off the unit, disconnect the power cable, and contact the

nearest authorized Yamaha dealer or service center.

TROUBLESHOOTING

General

Problem Cause Solution

The speakers make no

sound.

The volume may be set to the minimum

level.

Adjust the volume level.

The source may be incorrect. Select the correct source.

Sound suddenly turns off.

The sleep function (☞ P. 5) may be set. Turn on the system and play the source again.

Sound is cracked/

distorted or there is

abnormal noise.

Input source volume is excessive, or

volume of this unit is excessive.

Adjust the volume with VOLUME, or adjust

the sound with the tone control of DTA

CONTROLLER.

The unit does not operate

properly.

The unit may have received a strong

electrical shock such as lightning or

excessive static electricity, or power

supply may have dropped.

Set the system to off, and disconnect the

power cable. Wait about 30 seconds,

reconnect the power cable, and turn on the

system.

The system turns on but

immediately shuts off.

The power cable may be connected

improperly.

Make sure the power cable is plugged into the

wall outlet firmly.

The unit may have received a strong

electrical shock such as lightning or

excessive static electricity.

Set the system to off, and disconnect the

power cable. Wait about 30 seconds,

reconnect the power cable, and turn on the

system.

A digital or high-frequency

equipment produces

noises.

The unit may be placed too close to the

digital or high-frequency equipment.

Place the unit farther away from the

equipment.

The clock setting has been

cleared.

The unit is left more than one week after

you disconnect the power cable from the

wall outlet.

Plug the power cable into the wall outlet

firmly, and set the clock again (☞ P. 4).

RADIO does not play at

the alarm time.

ALARM TYPE is set to BEEP.Set ALARM TYPE to SOURCE+BEEP or

SOURCE (☞ P. 4).

Clock flashes and the unit

cannot be operated.

CLOCK on the rear panel is set to SET,

and this unit is in clock setting mode.

Set CLOCK to LOCK.

Radio reception

Problem Cause Solution

Too much noise during

stereo broadcast.

The radio station you selected may be far

from your area, or the radio wave

reception is weak in your area.

Try manual tuning to improve the signal

quality (☞ P. 8) or change the height or

direction of the antenna, or relocate the unit

(☞ P. 3).

AM broadcast cannot be

received.

The AM Antenna (supplied) may have

been disconnected.

Make sure that the AM Antenna is connected

properly (☞ P. 3).

TROUBLESHOOTING

14 En

■ Resetting the unit

If the unit does not function properly, resetting the unit may solve the problem. To reset the unit, press and hold

for more than 10 seconds.

Bluetooth

Problem Cause Solution

Cannot make this unit

paired with the other

component.

The other component does not support

A2DP.

Perform pairing operations with a component

which supports A2DP.

A Bluetooth adaptor, etc. that you want to

pair with this unit has a password other

than “0000”.

Use a Bluetooth adaptor, etc. whose password

is “0000”.

This unit and the other component are too

far apart.

Move the other component closer to this unit.

There is a device (microwave oven,

wireless LAN, etc.) that outputs signals in

the 2.4 GHz frequency band nearby.

Move this unit away from the device that is

emitting radio-frequency signals.

Cannot establish a

Bluetooth connection.

This unit is not registered on the other

component’s Bluetooth connection list.

Perform pairing operations again (☞ P. 10).

No sound is produced or

the sound is interrupted

during playback.

The Bluetooth connection of this unit with

the other component is disconnected.

Perform Bluetooth connection operations

again (☞ P. 12).

This unit and the other component are too

far apart.

Move the other component closer to this unit.

There is a device (microwave oven,

wireless LAN, etc.) that outputs signals in

the 2.4 GHz frequency band nearby.

Move this unit away from the device that is

emitting radio-frequency signals.

The other component’s Bluetooth

function is off.

Turn on the Bluetooth function of the other

component.

The other component is not set to send

Bluetooth audio signals to this unit.

Check that the Bluetooth function of the other

component is set properly.

The pairing setting of the other

component is not set to this unit.

Set the pairing setting of the other component

to this unit.

The other component’s volume is set to

the minimum.

Increase the volume level.

USB port charging

Problem Cause Solution

Cannot charge the

connected portable USB

device.

An incompatible USB device is connected

to the unit. Or the USB device is not

connected to this unit properly.

Turn off the system and reconnect the USB

device to the unit. If it does not resolve the

problem, the USB device is not chargeable

with the unit.

15 En

■ PLAYER SECTION

AUX IN

• Input connector

............STEREO L/R: 3.5 mm (1/8 in) STEREO mini Jack

■ AMPLIFIER SECTION

• Maximum output power..........................4 W + 4 W + 8 W

(6 Ω 1 kHz, 10% THD)

• Driver unit ...................4 cm (1 5/8 in) full-range driver × 2

5.5 cm (2 1/8 in) woofer + SR-Bass × 1

■ Bluetooth SECTION

• Bluetooth version...........................................Ver. 2.1+EDR

• Supported protocols.....................................A2DP, AVRCP

• Supported codecs................................................SBC, AAC

• Wireless output.........................................B luetooth Class 2

• Maximum communication distance

...................................... 10 m (33 ft) (without obstructions)

• Supported contents protection .................. SCMS-T method

■ TUNER SECTION

• Tuning range

Southeast Asia and Taiwan models:

FM....................................................87.5 to 108.0 MHz

U.S.A. and Canada models:

FM....................................................87.5 to 107.9 MHz

AM ...................................................... 530 to 1710 kHz

■ CHARGING CONNECTOR SECTION

• Connector type..................................................USB type A

• Output rating.........................................................5 V/2.1 A

■ NFC (Near Field Communication)

SECTION

• Supported model

.............................NFC-ready Android device Ver. 4.1, 4.2

* Some models may not work or be different in the required

distance for connection.

■ GENERAL

• Power Supply........................................... AC 120 V, 60 Hz

• Power consumption .....................................................22 W

• System off consumption .............................................1.9 W

• Standby consumption...................................... 0.5 W or less

• Dimensions (W × H × D)....................210 × 110 × 144 mm

(8 1/4 × 4 3/8 × 5 5/8 in)

• Weight......................................................... 1.4 kg (3.1 lbs.)

Specifications are subject to change without notice.

Bluetooth

• Bluetooth is a technology for wireless communication

between devices within an area of about 10 meters (33 ft)

employing the 2.4 GHz frequency band, a band which can

be used without a license.

• Bluetooth is a registered trademark of the Bluetooth SIG

and is used by Yamaha in accordance with a license

agreement.

Handling Bluetooth communications

• The 2.4 GHz band used by Bluetooth compatible devices

is a radio band shared by many types of equipment. While

Bluetooth compatible devices use a technology

minimizing the influence of other components using the

same radio band, such influence may reduce the speed or

distance of communications and in some cases interrupt

communications.

• The speed of signal transfer and the distance at which

communication is possible differs according to the

distance between the communicating devices, the

presence of obstacles, radio wave conditions and the type

of equipment.

• Yamaha does not guarantee all wireless connections

between this unit and devices compatible with Bluetooth

function.

SPECIFICATIONS

i Fr

1 Lire ces instructions.

2 Conserver ces instructions.

3 Tenir compte de tous les avertissements.

4 Suivre toutes les instructions.

5 Ne pas utiliser cet appareil à proximité de l’eau.

6 Nettoyer cet appareil avec un chiffon sec seulement.

7 Ne pas recouvrir les ailettes de ventilation. Installer

l’appareil selon les instructions du fabricant.

8 Ne pas installer près d’une source de chaleur, comme un

appareil de chauffage, une résistance électrique, un

poêle, ou tout autre appareil (amplificateurs compris)

produisant de la chaleur.

9 Ne pas désamorcer le système de sécurité d’une fiche

polarisée ou d’une fiche avec mise à la terre. Une fiche

polarisée est munie de deux lames, dont l’une est plus

large que l’autre. Une fiche avec mise à la terre est munie

de deux lames et d’une broche de terre. La lame la plus

large ou la troisième broche sont reliées à la terre pour

des raisons de sécurité. Si la fiche fournie ne s’insère pas

dans la prise, s’adresser à un électricien pour faire

remplacer la prise obsolète.

10 Protéger le cordon d’alimentation de sorte qu’il ne risque

pas d’être piétiné ou coincé, surtout au niveau des fiches,

des prises et de sa sortie de l’appareil.

11 Utiliser seulement les fixations et accessoires spécifiés

par le fabricant.

12 Utiliser seulement le chariot, socle,

trépied, support ou meuble spécifié par le

fabricant ou vendu avec l’appareil. Si un

chariot est utilisé, faire attention de ne pas

se blesser ou de le renverser pendant le

transport de l’appareil.

13 Débrancher cet appareil pendant les orages électriques,

ou s’il ne doit pas être utilisé pendant un certain temps.

14 Pour toute inspection s’adresser à un personnel qualifié.

Une inspection est nécessaire en cas de dommage, quel

qu’il soit, par exemple cordon d’alimentation ou fiche

endommagé, liquide répandu ou objet tombé à l’intérieur

de l’appareil, exposition de l’appareil à la pluie ou à

l’humidité, fonctionnement anormal ou chute de

l’appareil.

Yamaha et le Groupe des Entreprises Électroniques Grand Public de l’Association des Industries Électroniques

vous demandent de tirer le meilleur parti de votre équipement tout en écoutant à un niveau non dommageable

pour l’ouïe, c’est-à-dire un niveau où vous pouvez obtenir un son fort et clair, sans hurlement ni distorsion, mais

sans aucun danger pour l’ouïe. Comme les sons trop forts causent des lésions auditives qui ne peuvent être

détectées qu’à long terme, lorsqu’il est trop tard, Yamaha et le Groupe des Entreprises Électroniques Grand

Public de l’Association des Industries Électroniques vous déconseillent l’écoute prolongée à des volumes

excessifs.

PRÉCAUTIONS CONCERNANT LA SÉCURITÉ

CAUTION

RISK OF ELECTRIC SHOCK DO

NOT OPEN

ATTENTION : POUR RÉDUIRE LES RISQUES

D’INCENDIE ET DE DÉCHARGE

ELECTRIQUE, NE PAS RETIRER LE

COUVERCLE (OU LE PANNEAU ARRIÈRE).

AUCUNE PIÈCE INTERNE NE PEUT ÊTRE

CHANGÉE PAR L’UTILISATEUR. POUR

L’ENTRETIEN, S’ADRESSER À UN

PERSONNEL QUALIFIÉ.

• Explication des symboles

L’éclair avec une flèche à l’intérieur d’un

triangle équilatéral est destiné à attirer

l’attention de l’utilisateur sur la présence

d’une « tension dangereuse » non isolée à

l’intérieur du produit, pouvant être

suffisamment élevée pour constituer un

risque d’électrocution.

Le point d’exclamation à l’intérieur d’un

triangle équilatéral est destiné à attirer

l’attention de l’utilisateur sur la présence

d’instructions importantes sur l’emploi ou de

la maintenance (réparation) de l’appareil dans

la documentation fournie.

IMPORTANT

Veuillez enregistrer le numéro de série de cet appareil dans

l’espace réservé à cet effet, ci-dessous.

MODÈLE :

No. de série :

Le numéro de série se trouve à l’arrière de l’appareil. Prière

de conserver le mode d’emploi en lieu sûr pour toute

référence future.

Nous vous souhaitons un plaisir musical durable

La pagina sta caricando ...

Yamaha TSX-B72 Manuale del proprietario

Marca: Yamaha

Modello: TSX-B72

Categoria: Sveglie

Tipo: Manuale del proprietario

Scarica il pdf

rapporto

in altre lingue

English: Yamaha TSX-B72 Owner's manual
français: Yamaha TSX-B72 Le manuel du propriétaire
español: Yamaha TSX-B72 El manual del propietario
Deutsch: Yamaha TSX-B72 Bedienungsanleitung
Nederlands: Yamaha TSX-B72 de handleiding
dansk: Yamaha TSX-B72 Brugervejledning
čeština: Yamaha TSX-B72 Návod k obsluze
svenska: Yamaha TSX-B72 Bruksanvisning
Türkçe: Yamaha TSX-B72 El kitabı
suomi: Yamaha TSX-B72 Omistajan opas

Yamaha TSX-B72 Manuale del proprietario

Yamaha TSX-B72 Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti