Intel SR1625UR - Server System - 0 MB RAM Manuale utente

Intel

®

Server System SR1625UR

Service Guide

A Guide for Technically Qualified Assemblers of Intel

®

Identified Subassemblies/

Products

Intel Order Number E52881-005

ii Intel

®

Server System SR1625UR Service Guide

Disclaimer

Information in this document is provided in connection with Intel

®

products. No license, express or implied, by

estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's

Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any

express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to

fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property

right. Intel products are not designed, intended or authorized for use in any medical, life saving, or life sustaining

applications or for any other application in which the failure of the Intel product could create a situation where

personal injury or death may occur. Intel may make changes to specifications and product descriptions at any time,

without notice.

Intel server boards contain a number of high-density VLSI and power delivery components that need adequate

airflow for cooling. Intel's own chassis are designed and tested to meet the intended thermal requirements of these

components when the fully integrated system is used together. It is the responsibility of the system integrator that

chooses not to use Intel developed server building blocks to consult vendor datasheets and operating parameters to

determine the amount of airflow required for their specific application and environmental conditions. Intel Corporation

can not be held responsible if components fail or the server board does not operate correctly when used outside any

of their published operating or non-operating limits.

Intel, Intel Pentium, and Intel Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries in

the United States and other countries.

* Other names and brands may be claimed as the property of others.

Intel

®

Server System SR1625UR Service Guide iii

Preface

About this Manual

Thank you for purchasing and using the Intel

®

Server System SR1625UR.

This manual is written for system technicians who are responsible for troubleshooting,

upgrading, and repairing this server system. This document provides reference

information, feature information, and step by step instructions on how to add and replace

components on the server system. For the latest version of this manual, see

http://www.intel.com/p/en_US/support/highlights/server/s5520ur.

Manual Organization

Chapter 1 provides information on the contents of each server system and a list of

reference resources. This includes a list of technical documents that provide additional

details on the Intel

®

Server System SR1625UR, and the location where they can be found.

Chapter 2 provides a brief overview of the server system. This includes a list of the server

system features, illustrations of the product, and product diagrams to help you identify

components and their locations.

Chapter 3 provides instructions on adding and replacing components. It provides step-by-

step instructions and diagrams for installing or replacing components such as the fans,

power supply, drives, and other components.

Chapter 4 provides instructions on using the utilities that are shipped with the board or

that may be required to update the system. This includes information for navigating

through the BIOS Setup screens, performing a BIOS update, and resetting the password or

BIOS defaults.

The back of this manual provides technical specifications, regulatory information,

“getting help” information, and the warranty.

iv Intel

®

Server System SR1625UR Service Guide

Intel

®

Server System SR1625UR Service Guide v

Safety Information

Important Safety Instructions

Read all caution and safety statements in this document before performing any of the

instructions. See also Intel Server Boards and Server Chassis Safety Information on the

Intel

®

Server Deployment Toolkit 3.0 CD and/or at

http://www.intel.com/support/motherboards/server/sb/cs-010770.htm.

Wichtige Sicherheitshinweise

Lesen Sie zunächst sämtliche Warn- und Sicherheitshinweise in diesem Dokument, bevor

Sie eine der Anweisungen ausführen. Beachten Sie hierzu auch die Sicherheitshinweise zu

Intel-Serverplatinen und Servergehäusen auf der Intel

®

Server Deployment Toolkit 3.0 CD

oder unter http://www.intel.com/support/motherboards/server/sb/cs-010770.htm.

Consignes de sécurité

Lisez attention toutes les consignes de sécurité et les mises en garde indiquées dans ce

document avant de suivre toute instruction. Consultez Intel Server Boards and Server

Chassis Safety Information sur le Intel

®

Server Deployment Toolkit 3.0 CD ou bien

rendez-vous sur le site

http://www.intel.com/support/motherboards/server/sb/cs-010770.htm.

Instrucciones de seguridad importantes

Lea todas las declaraciones de seguridad y precaución de este documento antes de realizar

cualquiera de las instrucciones. Vea Intel Server Boards and Server Chassis Safety

Information en el Intel

®

Server Deployment Toolkit 3.0 CD y/o en

http://www.intel.com/support/motherboards/server/sb/cs-010770.htm.

vi Intel

®

Server System SR1625UR Service Guide

重要安全指导

Intel

®

Server System SR1625UR Service Guide vii

Warnings

Heed safety instructions: Before working with your server product, whether you are

using this guide or any other resource as a reference, pay close attention to the safety

instructions. You must adhere to the assembly instructions in this guide to ensure and

maintain compliance with existing product certifications and approvals. Use only the

described, regulated components specified in this guide. Use of other products/

components will void the UL listing and other regulatory approvals of the product and

will most likely result in noncompliance with product regulations in the region(s) in which

the product is sold.

System power on/off: The power button DOES NOT turn off the system AC power. To

remove power from system, you must unplug the AC power cord from the wall outlet.

Make sure the AC power cord is unplugged before you open the chassis, add, or remove

any components.

Hazardous conditions, devices and cables: Hazardous electrical conditions may be

present on power, telephone, and communication cables. Turn off the server and

disconnect the power cord, telecommunications systems, networks, and modems attached

to the server before opening it. Otherwise, personal injury or equipment damage can

result.

Electrostatic discharge (ESD) and ESD protection: ESD can damage disk drives,

boards, and other parts. We recommend that you perform all procedures in this chapter

only at an ESD workstation. If one is not available, provide some ESD protection by

wearing an antistatic wrist strap attached to chassis ground any unpainted metal surface on

your server when handling parts.

ESD and handling boards: Always handle boards carefully. They can be extremely

sensitive to ESD. Hold boards only by their edges. After removing a board from its

protective wrapper or from the server, place the board component side up on a grounded,

static free surface. Use a conductive foam pad if available but not the board wrapper. Do

not slide board over any surface.

Installing or removing jumpers: A jumper is a small plastic encased conductor that slips

over two jumper pins. Some jumpers have a small tab on top that you can grip with your

fingertips or with a pair of fine needle nosed pliers. If your jumpers do not have such a tab,

take care when using needle nosed pliers to remove or install a jumper; grip the narrow

sides of the jumper with the pliers, never the wide sides. Gripping the wide sides can

damage the contacts inside the jumper, causing intermittent problems with the function

controlled by that jumper. Take care to grip with, but not squeeze, the pliers or other tool

you use to remove a jumper, or you may bend or break the pins on the board.

viii Intel

®

Server System SR1625UR Service Guide

Intel

®

Server System SR1625UR Service Guide ix

Table of Contents

Preface ........................................................................................................................iii

About this Manual ................................................................................................................. iii

Manual Organization ............................................................................................................. iii

Safety Information ......................................................................................................v

Important Safety Instructions .................................................................................................v

Wichtige Sicherheitshinweise ................................................................................................v

Consignes de sécurité ...........................................................................................................v

Instrucciones de seguridad importantes ................................................................................v

Warnings .............................................................................................................................. vii

Chapter 1: Server System Contents and References .............................................1

Server System Contents ........................................................................................................1

Intel

®

Server System SR1625UR Contents ..................................................................1

Intel

®

Server System SR1625URSAS Contents ...........................................................2

Additional Information and Software ......................................................................................3

Chapter 2: Server System Features ..........................................................................5

Server System Feature Overview ..........................................................................................6

Server System Components ..................................................................................................9

Intel

®

Light-Guided Diagnostics ..................................................................................10

Server Board Components ..................................................................................................14

Configuration Jumpers ................................................................................................16

Front of Server System ........................................................................................................18

Peripheral Devices ......................................................................................................18

Control Panel ...............................................................................................................19

Bezels ..........................................................................................................................23

Rear of Server System ........................................................................................................24

Back Panel Connectors ...............................................................................................25

SAS/SATA Midplanes ..........................................................................................................27

Passive Midplane ........................................................................................................27

Active Midplane ...........................................................................................................28

Hot-swap SAS/SATA Backplane .........................................................................................29

RAID Support .......................................................................................................................30

Advanced Management Options .........................................................................................30

Intel® Remote Management Module 3 ........................................................................30

Rack Mount Options ............................................................................................................31

Chapter 3: Hardware Installations and Upgrades .................................................33

Before You Begin .................................................................................................................33

Tools and Supplies Needed ........................................................................................33

x Intel

®

Server System SR1625UR Service Guide

System References ..................................................................................................... 33

Cable Routing ...................................................................................................................... 34

Removing and Installing from a Rack ..................................................................................35

Fixed Bracket Rack Mount Removal ...........................................................................36

Fixed Bracket Rack Mount Installation ........................................................................36

Basic Rail Rack Mount Removal .................................................................................37

Basic Rail Rack Mount Installation ..............................................................................37

Tool-less Rail Rack Mount Servicing ..........................................................................38

Removing and Installing the Front Bezel .............................................................................38

Removing the Front Bezel ........................................................................................... 39

Installing the Front Bezel ............................................................................................. 40

Removing and Installing the System Cover ........................................................................41

Removing the Server System Cover ...........................................................................41

Installing the Server System Cover .............................................................................42

Removing and Installing the PCI Riser Assembly ...............................................................43

Removing the PCI Riser Assembly ............................................................................. 43

Installing the PCI Riser Assembly ............................................................................... 44

Replacing the PCI Riser Card .............................................................................................45

Removing the PCI Express* Riser Card .....................................................................45

Installing the Replacement PCI Express* Riser Card .................................................46

Installing and Removing a PCI Add-in Card ........................................................................ 46

Installing a PCI Add-in Card ........................................................................................46

Removing a PCI Add-in Card ......................................................................................47

Removing and Installing the Processor Air Duct .................................................................48

Removing the Processor Air Duct ...............................................................................48

Installing the Processor Air Duct .................................................................................49

Installing and Removing Memory ........................................................................................50

Installing DIMMs ..........................................................................................................50

Removing DIMMs ........................................................................................................52

Installing and Removing the Processor ............................................................................... 52

Installing the Processor ............................................................................................... 52

Installing the Heatsink .................................................................................................55

Removing the Heatsink ...............................................................................................57

Removing the Processor ............................................................................................. 58

Installing and Removing a Hot-swap Hard Drive ................................................................. 59

Installing a Hot-swap SAS/SATA Hard Disk Drive ...................................................... 59

Removing a Hot-swap SAS/SATA Hard Disk Drive .................................................... 61

Installing and Removing a Slimline Optical Drive ................................................................62

Installing a Slimline Optical Drive ................................................................................62

Removing a Slimline Optical Drive ..............................................................................63

Installing and Removing the I/O Expansion Module ............................................................64

Installing the I/O Expansion Module ............................................................................64

Removing the I/O Expansion Module(s) .....................................................................65

Installing and Removing the Intel

®

Remote Management Module 3 ...................................66

Intel

®

Server System SR1625UR Service Guide xi

Installing the Intel

®

RMM3 ...........................................................................................66

Removing the Intel

®

RMM3 .........................................................................................69

Removing and Installing the Midplane Board ......................................................................70

Removing the Midplane Board ....................................................................................70

Installing the Midplane Board ......................................................................................71

Installing and Removing the Intel

®

Integrated RAID Activation Key and the RAID Mini DIMM

(Active System Only) ...................................................................................................74

Installing the Intel

®

Integrated RAID Activation Key and the RAID Mini-DIMM ...........74

Removing the Intel

®

Integrated RAID Activation Key and the RAID Mini-DIMM .........75

Installing and Removing the RAID Battery Backup Unit (Active System Only) ...................76

Installing the RAID Battery Backup Unit (BBU) ...........................................................76

Removing the RAID Battery Backup Unit ....................................................................77

Removing and Installing the Server Board ..........................................................................78

Removing the Server Board ........................................................................................78

Installing the Server Board ..........................................................................................79

Replacing the Backup Battery .............................................................................................81

Replacing or Adding a Power Supply ..................................................................................82

Replacing the Power Distribution Module ............................................................................84

Replacing the Control Panel ................................................................................................86

Reinstalling the Mini Control Panel ......................................................................................88

Replacing a System Fan ......................................................................................................90

Removing and Installing the Fan Assembly .........................................................................91

Removing the System Fan Assembly ..........................................................................91

Installing the System Fan Assembly ............................................................................92

Installing and Removing the Rack Handles .........................................................................94

Installing the Rack Handles .........................................................................................94

Removing the Rack Handles .......................................................................................94

Chapter 4: Server Utilities ........................................................................................95

Using the BIOS Setup Utility ................................................................................................95

Entering BIOS Setup ...................................................................................................95

If You Cannot Access Setup ........................................................................................95

Setup Menus ...............................................................................................................95

Upgrading the BIOS .............................................................................................................97

Preparing for the Upgrade ...........................................................................................97

Upgrading the BIOS ....................................................................................................98

Clearing the Password .........................................................................................................98

Restoring the BIOS Defaults ..............................................................................................100

Appendix A: Technical Reference ........................................................................101

650-W Single Power Supply Input Voltages ......................................................................101

650-W Single Power Supply Output Voltages ...................................................................102

System Environmental Specifications ................................................................................103

Appendix B: Intel

®

Server Issue Report Form .....................................................105

xii Intel

®

Server System SR1625UR Service Guide

Appendix C: LED Decoder .....................................................................................111

Appendix D: Getting Help ......................................................................................119

Warranty Information .........................................................................................................119

Appendix E: Regulatory and Certification Information .......................................121

Product Regulatory Compliance ........................................................................................121

Product Safety Compliance ....................................................................................... 121

Product EMC Compliance - Class A Compliance .....................................................122

Product Ecology Compliance ....................................................................................123

Certifications/Registrations/Declarations .................................................................. 123

Product Regulatory Compliance Markings ................................................................124

Rack Mount Installation Guidelines ...................................................................................128

Power Cord Usage Guidelines ..........................................................................................129

Electromagnetic Compatibility Notices .............................................................................. 130

FCC Verification Statement (USA) ............................................................................130

ICES-003 (Canada) ...................................................................................................131

CE Declaration of Conformity (Europe) .....................................................................131

VCCI (Japan) ............................................................................................................131

BSMI (Taiwan) ..........................................................................................................131

KCC (Korea) ..............................................................................................................132

Regulated Specified Components .....................................................................................132

Appendix F: Installation/Assembly Safety Instructions ......................................133

English ...............................................................................................................................133

Deutsch ............................................................................................................................. 135

Français ............................................................................................................................. 137

Español .............................................................................................................................139

Italiano ...............................................................................................................................142

Appendix G: Safety Information ............................................................................145

English ...............................................................................................................................145

Server Safety Information ......................................................................................... 145

Safety Warnings and Cautions .................................................................................. 145

Intended Application Uses ........................................................................................ 146

Site Selection ............................................................................................................146

Equipment Handling Practices ..................................................................................146

Power and Electrical Warnings ................................................................................. 147

System Access Warnings ......................................................................................... 148

Rack Mount Warnings ...............................................................................................148

Electrostatic Discharge (ESD) ................................................................................... 149

Other Hazards ........................................................................................................... 149

Deutsch ............................................................................................................................. 150

Sicherheitshinweise für den Server ...........................................................................150

Sicherheitshinweise und Vorsichtsmaßnahmen .......................................................150

Zielbenutzer der Anwendung .................................................................................... 151

Intel

®

Server System SR1625UR Service Guide xiii

Standortauswahl ........................................................................................................151

Handhabung von Geräten .........................................................................................151

Warnungen zu Netzspannung und Elektrizität ..........................................................152

Warnhinweise für den Systemzugang .......................................................................153

Warnhinweise für Racks ............................................................................................153

Elektrostatische Entladungen (ESD) .........................................................................154

Andere Gefahren .......................................................................................................154

Français .............................................................................................................................155

Consignes de securite sur le serveur ........................................................................155

Séurité: avertissements et mises en garde ...............................................................155

Domaines d’utilisation prévus ....................................................................................156

Sélection d’un emplacement .....................................................................................156

Pratiques de manipulation de l’équipement ...............................................................157

Alimentation et avertissements en matiére d’électricité .............................................157

Avertissements sur le cordon d’alimentation .............................................................158

Avertissements sur l’accés au systéme .....................................................................158

Avertissements sur le montage en rack ....................................................................159

Décharges électrostatiques (ESD) ............................................................................160

Autres risques ............................................................................................................160

Périphériques laser ....................................................................................................161

Español ..............................................................................................................................161

Información de seguridad del servidor ......................................................................161

Advertencias y precauciones sobre seguridad ..........................................................161

Aplicaciones y usos previstos ....................................................................................162

Seleccién de la ubicación ..........................................................................................162

Manipulacién del equipo ............................................................................................163

Advertencias de alimentacién y eléctricas .................................................................163

Advertencias sobre el cable de alimentación ............................................................163

Advertencias el acceso al sistema ............................................................................164

Advertencias sobre el montaje en bastidor ...............................................................165

Descarga electrostática (ESD) ..................................................................................165

Otros riesgos .............................................................................................................166

xiv Intel

®

Server System SR1625UR Service Guide

Intel

®

Server System SR1625UR Service Guide xv

List of Figures

Figure 1. Intel

®

Server System SR1625UR............................................................................... 5

Figure 2. Server System Components...................................................................................... 9

Figure 3. Intel

®

Light-Guided Diagnostic LEDs - Server Board............................................... 11

Figure 4. Intel

®

Light-Guided Diagnostic LEDs - Passive Midplane........................................ 12

Figure 5. Intel

®

Light-Guided Diagnostic LEDs - Active Midplane .......................................... 12

Figure 6. Intel

®

Light-Guided Diagnostic LEDs - Mini Control Panel ...................................... 13

Figure 7. Server Board Connector and Component Locations ............................................... 15

Figure 8. Configuration Jumpers............................................................................................. 17

Figure 9. Front Panel Features and Peripherals..................................................................... 18

Figure 10. Mini Control Panel.................................................................................................. 20

Figure 11. Standard Control Panel.......................................................................................... 21

Figure 12. Intel

®

Local Control Panel...................................................................................... 23

Figure 13. Server System Rear Components ......................................................................... 24

Figure 14. Back Panel Connectors.......................................................................................... 25

Figure 15. Passive SATA/SAS Midplane Components........................................................... 27

Figure 16. Active SAS/SAS RAID Midplane Components ...................................................... 28

Figure 17. Hot-swap SAS/SATA Backplane Front Side Components..................................... 29

Figure 18. Hot-swap SAS/SATA Backplane Back Side Components..................................... 29

Figure 19. System Cable Routing ........................................................................................... 34

Figure 20. Front Bezel Supporting the Standard Control Panel.............................................. 39

Figure 21. Front Bezel Supporting the Intel

®

Local Control Panel.......................................... 39

Figure 22. Front Bezel Supporting the Mini Control Panel...................................................... 39

Figure 23. Removing the Front Bezel...................................................................................... 40

Figure 24. Installing the Front Bezel........................................................................................ 41

Figure 25. Removing the Server System Cover...................................................................... 42

Figure 26. Installing the Server System Cover........................................................................ 42

Figure 27. Removing PCI Riser Assembly from the Server System....................................... 43

Figure 28. Installing PCI Riser Assembly into the Server System........................................... 44

Figure 29. Removing the PCI Express* Riser Card ................................................................ 45

Figure 30. Installing the Replacement PCI Express* Riser Card............................................ 46

Figure 31. Installing an Add-In Card........................................................................................ 47

Figure 32. Removing an Add-In Card...................................................................................... 48

Figure 33. Removing the Processor Air Duct.......................................................................... 49

Figure 34. Installing the Processor Air Duct............................................................................ 50

Figure 35. Installing the Memory............................................................................................. 51

Figure 36. Lifting the Processor Socket Lever ........................................................................ 53

Figure 37. Opening the Load Plate ......................................................................................... 53

Figure 38. Removing the Protective Socket Cover ................................................................. 54

Figure 39. Removing the Processor Protective Cover............................................................ 54

Figure 40. Installing the Processor.......................................................................................... 55

Figure 41. Closing the Load Plate........................................................................................... 55

Figure 42. Installing the Heatsink............................................................................................ 56

xvi Intel

®

Server System SR1625UR Service Guide

Figure 43. Removing the Heatsink.......................................................................................... 58

Figure 44. Removing Hot-swap Disk Carrier from the Server System.................................... 59

Figure 45. Removing Drive Blank from Drive Carrier.............................................................. 60

Figure 46. Installing Hard Drive into Carrier............................................................................ 60

Figure 47. Install Drive Assemby into the Server System....................................................... 61

Figure 48. Installing the Plastic Guide to the Optical Drive..................................................... 62

Figure 49. Installing an Optical Drive into the Server System................................................. 63

Figure 50. Removing the Slimline Optical Drive from the Server System............................... 63

Figure 51. Installing the I/O Expansion Module to the Server System.................................... 65

Figure 52. Removing the I/O Expansion Module from the Server System ............................. 66

Figure 53. Removing the Intel

®

RMM3 filler panel.................................................................. 67

Figure 54. Installing the Intel

®

RMM3 to the bracket.............................................................. 67

Figure 55. Connecting the Intel

®

RMM3 cable ....................................................................... 68

Figure 56. Installing the Intel

®

RMM3 to the Server System .................................................. 68

Figure 57. Removing the Intel

®

RMM3 from the Server System............................................ 69

Figure 58. Installing the Intel

®

RMM3 filler panel.................................................................... 70

Figure 59. Removing the Midplane from the Server System.................................................. 71

Figure 60. Installing the Midplane Board into the Server System........................................... 72

Figure 61. Installing the SATA Cables.................................................................................... 73

Figure 62. Installing the RAID Activation Key and the RAID Mini-DIMM................................ 75

Figure 63. Removing the Intel

®

Integrated RAID Activation Key and the RAID Mini-DIMM... 76

Figure 64. Installing the RAID Battery Backup Unit................................................................ 77

Figure 65. Removing the RAID Battery Backup Unit.............................................................. 78

Figure 66. Removing the Server Board .................................................................................. 79

Figure 67. Installing the Server Board .................................................................................... 80

Figure 68. Replacing the Backup Battery ............................................................................... 82

Figure 69. Removing Power Supply Filler Panel from the Server System.............................. 83

Figure 70. Removing Power Supply Module from the Server System.................................... 83

Figure 71. Installing Power Supply Module into the Server System....................................... 84

Figure 72. Removing the Power Distribution Board Cover..................................................... 85

Figure 73. Installing the Power Distribution Board Cover....................................................... 86

Figure 74. Removing Mini Control Panel Module from the Server System............................. 87

Figure 75. Connecting the Control Panel Cables.................................................................... 87

Figure 76. Installing Control Panel Module into the Server System........................................ 88

Figure 77. Removing the Standard Control Panel from the Server System ........................... 89

Figure 78. Installing Mini Control Panel into the Server System............................................. 89

Figure 79. Removing a System Fan ....................................................................................... 90

Figure 80. Installing a System Fan ......................................................................................... 91

Figure 81. Removing the Fan Assembly................................................................................. 92

Figure 82. Installing the System Fan Assembly...................................................................... 93

Figure 83. Installing the Rack Handle..................................................................................... 94

Figure 84. Removing the Rack Handle................................................................................... 94

Figure 85. Password Clear Jumper ........................................................................................ 99

Figure 86. BIOS Default Jumper........................................................................................... 100

Figure 87. Diagnostic LED Placement Diagram ................................................................... 114

Intel

®

Server System SR1625UR Service Guide xvii

List of Tables

Table 1. Server System References .........................................................................................3

Table 2. Intel

®

Server System SR1625UR Feature Summary ..................................................6

Table 3. NIC LED Descriptions ...............................................................................................26

Table 4. Setup Menu Key Use ................................................................................................95

Table 5. Power Supply input Voltages ..................................................................................103

Table 6. Power Supply Output Capability ..............................................................................104

Table 7. System Environmental Specifications .....................................................................105

Table 8. POST Progress Code LED Example .......................................................................113

Table 9. Diagnostic LED POST Code Decoder .....................................................................114

Table 10. Product Regulatory Compliance Markings ............................................................126

xviii Intel

®

Server System SR1625UR Service Guide

Intel

®

Server System SR1625UR Service Guide 1

1 Server System Contents and

References

There are two versions of the Intel

®

Server System SR1625UR:

• Intel

®

Server System SR1625UR (Passive system)

• Intel

®

Server System SR1625URSAS (Active system)

Unless noted otherwise, all references to the Intel

®

Server System SR1625UR refer to

both product codes.

Server System Contents

The Intel

®

Server System SR1625UR ships with the Intel

®

Server Board S5520UR. For

information about the server board, see Intel

®

Server Board S5520UR Technical Product

Specification.

The contents of each server system are listed below.

Intel

®

Server System SR1625UR Contents

Your Intel

®

Server System SR1625UR (passive system) ships with the following items:

• Intel

®

Server Board S5520UR, installed in the server system

• One 650-W power supply, installed in the server system

• Full-length and full-height PCI Express* riser card assembly, installed in the server

system

• Processor air duct, installed in the server system

• Two processor heatsinks, installed in the server system

• Passive midplane, installed in the server system

• Hot-swap SAS/SATA backplane, installed in the server system

• Bridge board, installed in the server system

• Mini control panel, installed in the server system

• Six 2.5-inch hot-swap drive trays and drive filler blanks, installed in the server

system

• A filler panel (for drive locations 6 and 7), installed in the server system

• System fan assembly, including five 40X40X56-mm dual-rotor fans, installed in the

server system

2 Intel

®

Server System SR1625UR Service Guide

• A box of hardware components (referred to herein as the “hardware box”)

• Optical drive tray assembly, in the hardware box

• Two screws for installing the optical drive component, in the hardware box

• Rack handles, in the hardware box

• Slimline peripheral bay filler panel, in the hardware box

• One ganged SATA cable (consisting of six cables tied together), in the hardware box

• Attention document, in the server system product box

• Quick Start User's Guide, in the server system product box

• Intel

®

Server Deployment Toolkit 3.0 CD

• Intel

®

System Management Software DVD

Intel

®

Server System SR1625URSAS Contents

Your Intel

®

Server System SR1625URSAS (active system) ships with the following

items:

• Intel

®

Server Board S5520UR, installed in the server system

• One 650-W power supply, installed in the server system

• Full-length and full-height PCI Express* riser card assembly, installed in the server

system

• Processor air duct, installed in the server system

• Two processor heatsinks, installed in the server system

• Active SAS/SATA midplane, installed in the server system

• Hot-swap SAS/SATA backplane, installed in the server system

• Bridge board, installed in the server system

• Mini control panel, installed in the server system

• Eight 2.5-inch hot-swap drive trays and drive filler blanks, installed in the server

system

• System fan assembly, including five 40X40X56-mm dual-rotor fans, installed in the

server system

• A box of hardware components (referred to herein as the “hardware box”)

• Optical drive tray assembly, in the hardware box

• Two screws for installing the optical drive component, in the hardware box

• Slimline peripheral bay filler panel, in the hardware box

• Rack handles, in the hardware box

• Attention document, in the server system product box

• Quick Start User's Guide, in the server system product box

La pagina sta caricando ...

Intel SR1625UR - Server System - 0 MB RAM Manuale utente

Intel SR1625UR - Server System - 0 MB RAM Manuale utente

in altre lingue

Documenti correlati

Altri documenti