Intel AXXRMS2LL080 Hardware User's Manual

Intel

®

RAID Module

RMS2LL040(AXXRMS2LL040) and

RMS2LL080(AXXRMS2LL080)

Hardware User’s Guide

Intel Order Number: E97251-002

ii Intel® RAID Module RMS2LL040 and RMS2LL080 Hardware User’s Guide

DISCLAIMER

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL(R)

PRODUCTS.

NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY

INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS

PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL

ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED

WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY

OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE,

MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER

INTELLECTUAL PROPERTY RIGHT. Intel products are not intended for use in medical, life saving,

life sustaining applications. Intel may make changes to specifications and product descriptions at

any time, without notice.

Intel is a trademark or registered trademark of Intel Corporation or its subsidiaries in the United

States

and othe

r countries.

*Other names and brands may be claimed

as the property of others.

yright 2005-2010 by LSI Corporation. All

rights reserved.

Intel® RAID Module RMS2LL040 and RMS2LL080 Hardware User’s Guide iii

Preface

This is the primary hardware guide for the Intel

®

RAID Module RMS2LL040 and

RMS2LL080 (also known as Intel

®

Integrated RAID Controller RMS2LL040 and

RMS2LL080), which can be used to manage SAS and SATA disk drives. It contains

installation instructions and specifications.

For details on configuring the storage adapters, and for an overview of the software

drivers, see the Intel

®

RAID Software User’s Guide on the Resource CD.

Audience

This document assumes that you have some familiarity with RAID controllers/modules

and related support devices. The people who benefit from this book are:

• Engineers who are designing an Intel

®

RAID Module RMS2LL040 or RMS2LL080

for their RAID system.

• Anyone installing an Intel

®

RAID Module RMS2LL040 or RMS2LL080 in their

RAID system.

Organization

This document includes the following chapters and appendices:

• Chapter 1 provides a general overview of the Intel

®

RAID Module RMS2LL040

and RMS2LL080.

• Chapter 2 describes the procedures for installing and configuring the RAID module.

• Chapter 3 provides the characteristics and technical specifications for the Intel

®

RAID Module RMS2LL040 and RMS2LL080.

• Appendix A explains drive roaming.

• Appendix B provides safety instructions to be observed during installation and

assembly.

• Appendix C provides regulatory and certification information.

Related Publication

The Intel

®

RAID Software User’s Guide is included on the Resource CD that shipped with

the RAID module.

iv Intel® RAID Module RMS2LL040 and RMS2LL080 Hardware User’s Guide

Intel

®

RAID Module RMS2LL040 and RMS2LL080 Hardware User’s Guide v

Table of Contents

Preface ........................................................................................................................iii

Audience ............................................................................................................................... iii

Organization ......................................................................................................................... iii

Related Publication ............................................................................................................... iii

Chapter 1: Overview ...................................................................................................1

Benefits of SAS and SATA ....................................................................................................1

Intel

®

RMS2LL040 and RMS2LL080 .....................................................................................2

Protocol Support ............................................................................................................3

Operating System Support ............................................................................................3

Usability .........................................................................................................................3

Redundancy and Error Handling ...................................................................................3

SAS/SATA Features of the LSI* LSISAS2008 Processor Chip .....................................4

Chapter 2: Intel

®

RAID Module RMS2LL0x0 Hardware Installation .......................5

Requirements ........................................................................................................................5

Installing the RAID Module ....................................................................................................5

Chapter 3: Intel

®

RAID Module RMS2LL0x0 Characteristics .................................9

Major Components ..............................................................................................................12

LSI* LSISAS2008 Processor Chip ...............................................................................12

Flash ROM ..................................................................................................................13

Boot Strap ROM (SEEPROM) .....................................................................................13

Diagnostic Components ..............................................................................................13

SAS/SATA Connectors ................................................................................................13

Host Board Interface ....................................................................................................16

Technical Specifications ......................................................................................................18

Array Performance Features ...............................................................................................19

Fault Tolerance ............................................................................................................20

Electrical Characteristics .............................................................................................20

Thermal and Atmospheric Characteristics ...................................................................20

Safety Characteristics ..................................................................................................21

Operating Certifications .......................................................................................................21

Supported Device Technology .............................................................................................21

Support for Hard Disk Drive Devices ...........................................................................21

SAS Expander Support ...............................................................................................21

Support for Non-Hard Disk Drive Devices ...................................................................21

Enclosure Management Support .................................................................................22

RAID Functionality and Features .........................................................................................22

Hierarchy .....................................................................................................................22

vi Intel

®

RAID Module RMS2LL040 and RMS2LL080 Hardware User’s Guide

SAS Bus and ID Mapping ...........................................................................................22

Appendix A: Drive Roaming Install .........................................................................23

Drive Roaming .....................................................................................................................23

Appendix B: Installation/Assembly Safety Instructions .......................................25

Deutsch ...............................................................................................................................28

Français ...............................................................................................................................29

Español ...............................................................................................................................31

Italiano .................................................................................................................................32

Appendix C: Regulatory and Certification Information .........................................35

Product Safety and EMC Compliance .................................................................................35

Intel

®

RAID Module RMS2LL040 and RMS2LL080 Hardware User’s Guide vii

List of Figures

Figure 1. Installing the Barrel Standoff...................................................................................... 6

Figure 2. Installing Intel

®

RAID Module RMS2LL0x0................................................................ 6

Figure 3. Connecting Cable between the RAID Module and Drives/Backplane........................ 7

Figure 4. Card Layout................................................................................................................ 9

Figure 5. RMS2LL040 Hardware Block Diagram.................................................................... 11

Figure 6. RMS2LL080 Hardware Block Diagram.................................................................... 12

Figure 7. Intel

®

RAID Module RMS2LL0x0 SAS/SATA Connectors....................................... 14

Figure 8. SAS/SATA Interface................................................................................................. 14

Figure 9. SAS/SATA Cable..................................................................................................... 15

Figure 10. PCI Interface.......................................................................................................... 16

viii Intel

®

RAID Module RMS2LL040 and RMS2LL080 Hardware User’s Guide

Intel® RAID Module RMS2LL040 and RMS2LL080 Hardware User’s Guide ix

List of Tables

Table 1. Jumper Description ...................................................................................................10

Table 2. SAS/SATA Connector Pin-out ...................................................................................15

Table 3. Host Board Interface Connector Pin-Out ...................................................................17

Table 4. Technical Specifications ............................................................................................18

Table 5. Array Performance Features .....................................................................................19

Table 6. Fault Tolerance Features ..........................................................................................20

Table 7. RAID Virtual Drive Status ..........................................................................................22

x Intel® RAID Module RMS2LL040 and RMS2LL080 Hardware User’s Guide

Intel® RAID Module RMS2LL040 and RMS2LL080 Hardware User’s Guide 1

1 Overview

The Intel

®

RAID Module RMS2LL040 and RMS2LL080 provide reliable and fault-

tolerant disk subsystem management based on the Intel

®

Entry Hardware RAID (IR)

Stack. This is an ideal RAID solution for the internal large capacity storage needs of mid

to low-end servers and workstations for use by workgroups and departmental-sized

organizations or individuals. The Intel

®

RAID Module RMS2LL040 and RMS2LL080

offer a cost-effective way to implement RAID in a server for internal storage.

As the second generation PCI Express* storage adapters, the Intel

®

RAID Module

RMS2LL040 and RMS2LL080 address the growing demand for increased data

throughput and scalability requirements across mid to low-end servers and workstations.

The controller can be connected to up to four drives (RMS2LL040) or eight drives

(RMS2LL080) directly and allows the use of expanders to connect to additional drives.

For more information about the use of expanders, see the ANSI SAS Standard, version 2.0

specification.

SATA and SAS are serial, point-to-point, device interfaces that use simplified cabling,

smaller connectors, lower pin counts, and lower power requirements than parallel SCSI.

Benefits of SAS and SATA

SAS is a serial, point-to-point, enterprise-level device interface that leverages the proven

SCSI protocol set. SAS is a convergence of the advantages of SATA, SCSI, and FC, and is

the future mainstay of the enterprise and high-end workstation storage markets. SAS

offers a higher bandwidth per pin than parallel SCSI and improves signal and data

integrity.

The SAS interface uses the proven SCSI command set to ensure reliable data transfers,

while providing the connectivity and flexibility of point-to-point serial data transfers. The

serial transmission of SCSI commands eliminates clock skew challenges. The SAS

interface provides improved performance, simplified cabling, smaller connectors, lower

pin count, and lower power requirements than parallel SCSI.

SAS controllers leverage a common electrical and physical connection interface that is

compatible with Serial ATA technology. The SAS and SATA protocols use a thin, 7-wire

connector instead of the 68-wire SCSI cable or 40-wire ATA cable. The SAS/SATA

connector and cable are easier to manipulate, connect to smaller devices, and do not

inhibit airflow. The point-to-point SATA architecture eliminates difficulties created by the

legacy ATA master-slave architecture, while maintaining compatibility with existing ATA

firmware.

2 Intel® RAID Module RMS2LL040 and RMS2LL080 Hardware User’s Guide

Intel

®

RMS2LL040 and RMS2LL080

The Intel

®

RAID Module RMS2LL040 and RMS2LL080 are intelligent custom board-to-

board PCI Express* 2.0 compliant interface RAID adapters with an integrated LSI*

LSISAS2008 Processor Chip, providing both a SAS controller and RAID engine. With

four (RMS2LL040) or eight (RMS2LL080) independent ports supporting 6-Gbps and 3

Gbps SAS data transfers using four or eight individual SAS/SATA connectors, this

controller supports up to 32 enterprise-class SAS or SATA devices and 64 logical drives.

The PCI Express* connector fits into a 50 pin connector capable of performance up to 5

Gbps per lane.

The RAID modules are designed to fit the following Intel

®

Server Boards and Systems:

• Intel

®

Server Board S5500WB

• Intel

®

Server Board S5520UR

• Intel

®

Server Board S5520HC / S5520HCT

• Intel

®

Server Board S5500HCV

• Intel

®

Workstation Board S5520SC

• Intel

®

Server Board S3420GP

• Intel

®

Server System SR1600UR

• Intel

®

Server System SR2600UR

• Intel

®

Server System SR2625UR

• Intel

®

Server System SR1625UR

• Intel

®

Workstation System SC5650SCWS

• Intel

®

Server System SC5650HCBRP

• Intel

®

Server System SR1690WB

• Intel

®

Server System SR1695WB

• Intel

®

Server system SR2612UR

• Intel

®

Server system SR1630GP/SR1630HGP

Note: Additional Intel

®

Server Boards and Systems may be supported. For the most up-to-date

list, see the Compatibility section under the link for this Intel

®

RAID Module at

http://www.intel.com/support/go/motherboards/ser

ver/index.htm.

The SAS RAID controllers support the SAS protocol as described in the Serial Att

ached

SCSI Standard, Version 2.0. The controllers also support the Serial ATA II (SATA II)

protocol defined by the Serial ATA Specification, Version 1.0a and the Serial ATA II:

Extension to the Serial ATA Specification, Version 1.1. SATA II is an extension to SATA

1.0a.

Intel® RAID Module RMS2LL040 and RMS2LL080 Hardware User’s Guide 3

Protocol Support

Each port on the SAS controllers supports SAS devices, SATA II devices, or both using

SSP, SMP, STP, and SATA II as follows:

• Serial SCSI Protocol (SSP) to enable communication with other SAS devices.

• SATA II Protocol to enable communication with other SATA II devices.

• Serial Management Protocol (SMP) to share topology management information

with expanders.

• Serial Tunneling Protocol (STP) support for SATA II through expander interfaces..

Operating System Support

• Windows Server 2008* R2 and Windows Server 2003*

• Red Hat* Enterprise Linux 5.0

• SuSE* Linux Enterprise Server 10 and 11

The operating systems supported may not be supported by your server board. See the

T

ested operating system list for your server board at

http://www.intel.com/support/go/motherboards/server/index.htm.

To make sure the RAID module supports your operating system, see also the Tested

Hardware and Operating System List for the Intel

®

RAID Module RMS2LL040 and

RMS2LL080.

Usability

• Small, thin cabling with up to 6.0 Gb/s serial, point-to-point data transfer rates.

• Support for non-disk devices and mixed capacity drives.

• Support for RAID levels 0, 1, and 1E.

• Dedicated or global hot spare with auto rebuild if an array drive fails.

• Fixed RAID strip size of 64 KB.

• Advanced array configuration and management utilities that provide drive roaming.

• Upgradeable Flash ROM interface.

• Allows for staggered spin-up, hot-plug, and lower power consumption.

Redundancy and Error Handling

• SGPIO, In-band and out-band SES2 Enclosure management support.

• Activity and fault indicators per drive, port selector (dual-port drives).

• Auto-detection of failed drives with transparent rebuild.

4 Intel® RAID Module RMS2LL040 and RMS2LL080 Hardware User’s Guide

• Commands are retried up to four times.

• SMART technology predicts failures of drives and electronic components for drives

in IR mode.

• Firmware provides best effort to recognize an error and recover from it if possible.

• Failures are logged from controller and drive firmware.

• Failures are logged in Intel

®

RAID Web Console 2, CIM, and LEDs.

SAS/SATA Features of the LSI* LSISAS2008 Processor Chip

See “LSI* LSISAS2008 Processor Chip” for SAS/SATA features of the LSI*

LSISAS2008 Processor Chip.

Intel® RAID Module RMS2LL040 and RMS2LL080 Hardware User’s Guide 5

2 Intel

®

RAID Module RMS2LL0x0

Hardware Installation

Requirements

• Intel

®

RAID Module RMS2LL040 and RMS2LL080, with the provided standoffs

• A host system with one available 50-pins PCI Express* 2.0 connector

• Resource CD, which contains drivers and documentation

• SAS or SATA 6.0 hard drives

• Four provided SAS/SATA cables (for cable requirements, see step 6 in “Installing

the RAID Module”)

Note: I

ntel Corporation strongly reco

mmends using an uninterruptible power supply (UPS).

Installing the RAID Module

To install the RAID Module, follow these steps:

1. Turn off the power to the system, all drives, enclosures, a

nd system components.

Remove the power cord(s).

2. Remove the server cover. For instructions, see your server system

documentation.

3. Insert the three barrel standoffs into the matching holes in the server/workstation

bo

ard. To locate the matching module card slot on your server/workstation board,

see your server/workstation board documentation.

The Intel

®

Server Board SR5520UR is shown for illustrative purpose. Actual

standoff hole locations could be different (see Figure 1).

4. Attach the Intel

®

RAID Module RMS2LL0x0 to the matching server/workstation

board connector, and press the module card firmly to engage the barrel standoffs

installed in step 3 (see Figure 1). The Intel

®

RAID Module RM2LL080 is shown

for illustrative purpose (see Figure 2).

6 Intel® RAID Module RMS2LL040 and RMS2LL080 Hardware User’s Guide

Figure 1. Installing the Barrel Standoff

5. Press down gently but firmly to ensure that the card is properly se

ated in the

connectors, and then insert the three pin standoffs into the barrel standoffs

respectively ( see Figure 2).

Figure 2. Installing Intel

®

RAID Module RMS2LL0x0

6. Connect the SAS/SATA cables from the backplane (or hard drives) to the RAID

module

(see Figure 3). For information regarding connectin

g the recommended

Right-angle end or Vertical end of the SAS/SATA cable to the SAS connectors of

the controller, see

your server/workstation board or chassis documentation. Make

sure the cables are properly connected to the controller.

Note: System throughput problems can occur if non-standard SAS cables are used.

To

minimize the potential for problems:

✧ Use cables no longer than ten meters for SAS

and one meter for SATA. It is

better to use the shortest possible cables. The cable length should be reduced

by about one foot (.33 meters) if using a backplane.

✧ You may connect one device per SATA/SAS cable either as a device or as an

ex

pander.

AF003487

AF003489

Intel® RAID Module RMS2LL040 and RMS2LL080 Hardware User’s Guide 7

✧ Route SAS cables carefully.

✧ Use only “straight” SAS cables, not “c

ross-over” SAS cables. .

Figure 3. Connecting Cable between the RAID Module and Drives/Backplane

7. Install the server system cover and connect the powe

r cords. See your server system

documentation for instructions.

AF003488

8 Intel® RAID Module RMS2LL040 and RMS2LL080 Hardware User’s Guide

Configuring the RAID Module

After performing the Intel

®

RAID Module RMS2LL0x0 installation, you must configure

the storage adapter and install the operating system driver. The Intel

®

RAID Software

User’s Guide (Document Number: D29305-0xx) provides configuration options and

instructions for the Intel

®

RAID Module RMS2LL0x0, as well as detailed installation

instructions for operating system drivers.

Intel® RAID Module RMS2LL040 and RMS2LL080 Hardware User’s Guide 9

3 Intel

®

RAID Module RMS2LL0x0

Characteristics

Figure 4. Card Layout

AF003490

J1

J2

J3

J4

J5

J6

J7

J8

J9

J10

J11

10 Intel® RAID Module RMS2LL040 and RMS2LL080 Hardware User’s Guide

Table 1. Jumper Description

s

Jumper Description Type Comments

J1 - J8 Internal SAS/SATA Port

Connectors, Ports 0-7

Connection to SAS/SATA devices:

• J1 = SAS/SATA Port 0

• J2 = SAS/SATA Port 1

• J3 = SAS/SATA Port 2

• J4 = SAS/SATA Port 3

• J5 = SAS/SATA Port 4

• J6 = SAS/SATA Port 5

• J7 = SAS/SATA Port 6

• J8 = SAS/SATA Port 7

J5 - J8 (Ports 4 - 7) are only available on Intel(R)

RAID Module RMS2LL080

J9 Keyed SGPIO Connector 4-pin keyed

connector

Enclosure management (SGPIO) for Ports 4-7

The connector is not available on Intel(R) RAID

Module RMS2LL040

J10 Keyed SGPIO Connector 4-pin keyed

connector

Enclosure management (SGPIO) for Ports 0-3

J11 Keyed I2C Connector 3-pin connector Out-of-band enclosure management (SES2)

La pagina sta caricando ...

Intel AXXRMS2LL080 Hardware User's Manual

Questo manuale è adatto anche per

Intel AXXRMS2LL080 Hardware User's Manual

in altre lingue

Documenti correlati

Altri documenti