Tyan S5501 Informazioni importanti

http://www.tyan.com

1

S5501

Version 1.0

Copyright

®

is a

registered trademark of MiTAC International Corporation.

Trademark

All registered and unregistered trademarks and company names contained in this

manual are property of their respective owners including, but not limited to the

following.

TYAN

®

is a trademark of MiTAC International Corporation.

Intel

®

Clarkdale, Lynnfield and combinations thereof are trademarks of Intel

Corporation.

AMI, AMI BIOS are trademarks of AMI Technologies.

Microsoft, Windows are trademarks of Microsoft Corporation.

SuSE is a trademark of Novell.

IBM, PC, AT, and PS/2 are trademarks of IBM Corporation.

Notice

Information contained in this document is furnished by MiTAC International

Corporation and has been reviewed for accuracy and reliability prior to printing.

MiTAC assumes no liability whatsoever, and disclaims any express or implied

warranty, relating to sale and/or use of TYAN products including liability or

warranties relating to fitness for a particular purpose or merchantability. MiTAC

retains the right to make changes to product descriptions and/or specifications at

any time, without notice. In no event will MiTAC be held liable for any direct or

indirect, incidental or consequential damage, loss of use, loss of data or other

malady resulting from errors or inaccuracies of information contained in this

document.

2

http://www.tyan.com

Table of Contents

Before You Begin .................................................................................................. 3

Chapter 1: Introduction .............................................................................. 5

1.1 Congratulations ............................................................................................ 5

1.2 Hardware Specifications............................................................................... 5

1.3 Software Configuration................................................................................. 9

Chapter 2: Board Installation................................................................... 11

2.1 Board Image ............................................................................................... 12

2.2 Block Diagram............................................................................................ 13

2.3 Board Parts, Jumpers and Connectors....................................................... 14

2.4 Installing the Processor.............................................................................. 24

2.5 Installing the Heatsink................................................................................ 27

2.6 Finishing Installing the Heatsink................................................................ 28

2.7 Thermal Interface Material ........................................................................ 29

2.8 Tips on Installing Motherboard in Chassis................................................. 30

2.9 Installing the Memory................................................................................. 32

2.10 Attaching Drive Cables............................................................................. 35

2.11 Installing Add-In Cards ............................................................................ 36

2.12 Connecting External Devices.................................................................... 37

2.13 Installing the Power Supply...................................................................... 38

2.14 Finishing up.............................................................................................. 39

Chapter 3: BIOS Setup ............................................................................. 41

3.1 BIOS Main Menu ........................................................................................ 43

3.2 Advanced Menu .......................................................................................... 44

3.3 PCI PnP Menu............................................................................................ 70

3.4 Boot Menu................................................................................................... 72

3.5 Security Menu ............................................................................................. 77

3.6 Chipset Menu.............................................................................................. 78

3.7 Exit Menu.................................................................................................... 84

Chapter 4: Diagnostics............................................................................. 85

4.1

Beep Codes ................................................................................................. 85

4.2

Flash Utility................................................................................................ 85

4.3 AMIBIOS Post Code ................................................................................... 86

Glossary..................................................................................................... 89

Technical Support .................................................................................... 95

3

http://www.tyan.com

Before You Begin…

Check the box contents!

1x S5501 motherboard

2 x SAS cable

6 x Serial ATA Cable

1 x USB2.0 cable

1 x S5501 user’s manual

1 x S5501 Quick Reference guide

1 x TYAN driver CD

1 x I/O shield

If any of these items are missing, please contact your vendor/dealer for

replacement before continuing with the installation process.

NOTE: Please contact your vendor for optional cables purchase.

4

http://www.tyan.com

NOTE

5

http://www.tyan.com

Chapter 1: Introduction

1.1 Congratulations

You have purchased one of the most powerful server solutions. Based on Intel

®

Ibex Peak (PCH), ASPEED AST2050 and LSI 1068E chipsets, the S5501 is

designed to support one Clarkdale (dual core) or Lynnfield (quad core) processor

and up to 32GB RDIMM or 16GB UDIMM DDR3 registered ECC 800/1066/1333

memory, providing a rich feature set and incredible performance. Leveraging

advanced technology from Intel, the S5501 is capable of offering scalable 32 and

64-bit computing, high-bandwidth memory design, and lightning-fast PCI-E bus

implementation.

The S5501 not only empowers your company in today’s demanding IT environment

but also offers a smooth path for future application usage. All of this provides the

S5501 the power and flexibility to meet the needs of nearly any server application.

Remember to visit MiTAC’s Website at http://www.tyan.com. There you can find

information on all of MiTAC’s products with FAQs, online manuals and BIOS

upgrades.

1.2 Hardware Specifications

TYAN S5501 (S5501GM3NR)

Supported CPU

Series

Intel Xeon Processors 3400 Series

Socket Type / Q'ty LGA 1156/ (1)

Thermal Design

Power (TDP)

wattage

Max up to 95W

Processor

CPU list

Please refer to our web site for the CPU supported

list.

PCH Intel 3420

Chipset

Super I/O Winbond W83627

Supported DIMM

Qty

(6) DIMM slots

DIMM Type / Speed

DDR3 800/1066/1333* RDIMM/UDIMM / * limit 1

per channel for 1333MHz speed

Capacity Up to 32GB RDIMM/ 16GB UDIMM

Memory channel

2 Channels / Support 2 UDIMMs or 3 RDIMMs per

channel

Memory

Memory voltage 1.5V

PCI-E (2) PCI-E Gen.2 x8 slots Expansion Slots

Recommended M2091, PCI-E x16 1U riser card (left) / M2091-R,

6

http://www.tyan.com

TYAN Riser Card PCI-E x8 1U riser card (right)

Note: Only x8 signal when using M2091

Recommended

Barebone /

Chassis

1U Barebone GT20-B5501

Port Q'ty (3)

LAN

Controller Intel 82574L

Connector (6) SATA

Controller Intel 3420

Speed 3.0 Gb/s

Storage SATA

RAID RAID 0/1/10/5 (Intel Matrix RAID)

Connector type D-Sub 15-pin

Resolution 1600x1200@60Hz

Graphic

Chipset Aspeed AST2050

USB

(7) USB2.0 ports (2 at rear, 4 via cable, 1 type A

onboard)

COM (1) port (rear)

PS/2 (1) PS/2 connector

RJ-45 (2) GbE ports / (1) RJ-45 port for IPMI

Power EPS12V / SSI 24-pin + 8-pin power connectors

Front Panel (1) 2x12-pin SSI front panel header

PSMI (1) 1x5-pin header

Input /Output

SATA (6) SATA-II connectors

Chipset Winbond W83793G

Voltage

Monitors voltage for CPU, memory, chipset &

power supply

Fan Total (6) 4-pin headers

Temperature

Monitors temperature for CPU & system

environment

System

Monitoring

Others

Chassis intrusion detection / Watchdog timer

support

Onboard Chipset Onboard Aspeed AST2050

AST2050 IPMI

Feature

IPMI 2.0 compliant baseboard management

controller (BMC) / Supports storage over IP and

remote platform-flash / USB 2.0 virtual hub

Server

Management

AST2050 iKVM

Feature

24-bit high quality video compression / Dual 10/100

Mb/s MAC interfaces

Brand / ROM size AMI / 1MB

BIOS

Feature

Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3

/PXE boot / ACPI 2.0 power management /Power

on mode after power recovery / User-configurable

H/W monitoring / Auto-configurable of hard disk

types

Form Factor EATX

Physical

Dimension

Board Dimension 12"x13" (305x330mm)

7

http://www.tyan.com

Operating System OS supported list

Please refer to our web site for the OS supported

list.

FCC (DoC) Class A

Regulation

CE (DoC) Yes

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

Non-operating

Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

Operating

Environment

In/Non-operating

Humidity

90%, non-condensing at 35° C

RoHS RoHS 6/6 Complaint Yes

Motherboard (1) S5501 Motherboard

Manual (1) User's manual / (1) Quick Ref. Guide

Installation CD (1) TYAN installation CD

I/O Shield (1) I/O Shield

Package Contains

Cable SATA (6) SATA signal cables

Optional

accessories

Riser Card

M2091, PCI-E x16 1U riser card (left) / M2091-R,

PCI-E x8 1U riser card (right)

TYAN S5501 (S5501WGM3NR)

Supported CPU

Series

Intel Xeon Processors 3400 Series

Socket Type / Q'ty LGA 1156/ (1)

Thermal Design

Power (TDP)

wattage

Max up to 95W

Processor

CPU list

Please refer to our web site for the CPU supported

list.

PCH Intel 3420

Chipset

Super I/O Winbond W83627

Supported DIMM

Qty

(6) DIMM slots

DIMM Type / Speed

DDR3 800/1066/1333* RDIMM/UDIMM / * limit 1

per channel for 1333MHz speed

Capacity Up to 32GB RDIMM/ 16GB UDIMM

Memory channel

2 Channels / Support 2 UDIMMs or 3 RDIMMs per

channel

Memory

Memory voltage 1.5V

PCI-E (2) PCI-E Gen.2 x8 slots

Recommended

TYAN Riser Card

M2091, PCI-E x16 1U riser card (left) / M2091-R,

PCI-E x8 1U riser card (right)

Expansion Slots

Note: Only x8 signal when using M2091

Recommended

Barebone /

Chassis

1U Barebone GT20-B5501

8

http://www.tyan.com

Port Q'ty (3)

LAN

Controller Intel 82574L

Connector (2) Mini-SAS connectors (totally support 8 ports)

Controller LSI SAS1068E

Speed 3.0 Gb/s

SAS

RAID RAID 0/1/1E (LSI Integrated RAID)

Connector (6) SATA

Controller Intel 3420

Speed 3.0 Gb/s

Storage

SATA

RAID RAID 0/1/10/5 (Intel Matrix RAID)

Connector type D-Sub 15-pin

Resolution 1600x1200@60Hz

Graphic

Chipset Aspeed AST2050

USB

(7) USB2.0 ports (2 at rear, 4 via cable, 1 type A

onboard)

COM (1) port (rear)

PS/2 (1) PS/2 connector

SAS (2) Mini-SAS (4-in-1) connectors

RJ-45 (2) GbE ports / (1) RJ-45 port for IPMI

Power EPS12V / SSI 24-pin + 8-pin power connectors

Front Panel (1) 2x12-pin SSI front panel header

PSMI (1) 1x5-pin header

Input /Output

SATA (6) SATA-II connectors

Chipset Winbond W83793G

Voltage

Monitors voltage for CPU, memory, chipset &

power supply

Fan Total (6) 4-pin headers

Temperature

Monitors temperature for CPU & system

environment

System

Monitoring

Others

Chassis intrusion detection / Watchdog timer

support

Onboard Chipset Onboard Aspeed AST2050

AST2050 IPMI

Feature

IPMI 2.0 compliant baseboard management

controller (BMC) / Supports storage over IP and

remote platform-flash / USB 2.0 virtual hub

Server

Management

AST2050 iKVM

Feature

24-bit high quality video compression / Dual 10/100

Mb/s MAC interfaces

Brand / ROM size AMI / 1MB

BIOS

Feature

Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3

/PXE boot / ACPI 2.0 power management /Power

on mode after power recovery / User-configurable

H/W monitoring / Auto-configurable of hard disk

types

Form Factor EATX

Physical

Dimension

Board Dimension 12"x13" (305x330mm)

9

http://www.tyan.com

Operating System OS supported list

Please refer to our web site for the OS supported

list.

FCC (DoC) Class A

Regulation

CE (DoC) Yes

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

Non-operating

Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

Operating

Environment

In/Non-operating

Humidity

90%, non-condensing at 35° C

RoHS RoHS 6/6 Complaint Yes

Motherboard (1) S5501 Motherboard

Manual (1) User's manual / (1) Quick Ref. Guide

Installation CD (1) TYAN installation CD

I/O Shield (1) I/O Shield

SATA (6) SATA signal cables

Package Contains

Cable

SAS (2) SAS cables

Optional

accessories

Riser Card

M2091, PCI-E x16 1U riser card (left) / M2091-R,

PCI-E x8 1U riser card (right)

1.3 Software Configuration

Please visit the MiTAC Web Site at http://www.tyan.com to download the latest

AST2050 Software Configuration Guide.

10

http://www.tyan.com

NOTE

11

http://www.tyan.com

Chapter 2: Board Installation

You are now ready to install your motherboard. The mounting hole pattern of the

S5501 matches the EATX specification. Before continuing with installation, confirm

that your chassis supports an EATX motherboard.

How to install our products right… the first time

The first thing you should do is reading this user’s manual. It contains important

information that will make configuration and setup much easier. Here are some

precautions you should take when installing your motherboard:

(1) Ground yourself properly before removing your motherboard from the

antistatic bag. Unplug the power from your computer power supply and

then touch a safely grounded object to release static charge (i.e. power

supply case). For the safest conditions, MiTAC recommends wearing a

static safety wrist strap.

(2) Hold the motherboard by its edges and do not touch the bottom of the

board, or flex the board in any way.

(3) Avoid touching the motherboard components, IC chips, connectors,

memory modules, and leads.

(4) Place the motherboard on a grounded antistatic surface or on the antistatic

bag that the board was shipped in.

(5) Inspect the board for damage.

The following pages include details on how to install your motherboard into your

chassis, as well as installing the processor, memory, disk drives and cables.

NOTE

DO NOT APPLY POWER TO THE BOARD IF IT HAS BEEN

DAMAGED.

12

http://www.tyan.com

2.1 Board Image

S5501

This picture is representative of the latest board revision available at the time of

publishing. The board you receive may or may not look exactly like the above

picture.

13

http://www.tyan.com

2.2 Block Diagram

S5501

14

http://www.tyan.com

2.3 Board Parts, Jumpers and Connectors

S5501

This diagram is representative of the latest board revision available at the time of

publishing. The board you receive may not look exactly like the above diagram.

Jumper Legend



OPEN - Jumper OFF, without jumper cover



CLOSED – Jumper ON, with jumper cover

15

http://www.tyan.com

Jumper/Connector Function

J5/J7/J27/J35/J36/J37 4-pin Fan connector

J38/J39/J40/J41/J42 8-pin 4056 Fan Header

J21/J22/J25/J26 (blue) USB Front Panel Header

USB1 Type-A USB Connectors

LED1 ID LED

J6 COM2 Header

J12 LAN3 LED Header

J13 Chassis Intrusion Jumper

J14 Port80 Header

J16 Front Panel Connector

J17 ICH SGPIO Header

J24 PSMI Connector

J11 Enable/Disable BMC Jumper

JP1 Clear CMOS Jumper

JP2/JP3 COM switch Jumper

JP4 (S5501WGM3NR only) Enable/Disable SAS1068E Jumper

16

http://www.tyan.com

USB1

J24

J16

(from left to right)

J21/J22/J25/J26

17

http://www.tyan.com

J21/J22/J35/J26: USB Front Panel Header (Blue)

10

9

2

1

Pin Signal Pin Signal

1 PWR_5V 2 PWR_5V

3 USB_N1 4 USB_N2

5 USB_P1 6 USB_P2

7 GND 8 GND

9 KEY 10 GND

USB2: J21 USB3: J22

USB4: J25 USB5: J26

USB1: Type-A USB Connector

Pin Signal Pin Signal

1 +5v 2 USB D-

3 USB D+ 4 GND

J16: Standard Front Panel Connector

2

4

2

3

2

1

Use this header to connect some control

or signal wires from motherboard to

chassis, such as HDD LED, power LED,

and ID LED.

Pin Signal Pin Signal

1 Power LED+ 2 5V_AUX

3 KEY 4 ID LED+

5 Power LED- 6 ID LED-

7 HDLED+ 8 Fault_LED1-

9 HDLED- 10 Fault_LED2-

11 Power SW# 12 LAN1 ACTLED+

13 GND1 14 LAN1 ACTLED-

15 Reset SW# 16 SMBUS SDA

17 GND2 18 SMBUS SCL

19 ID SW 20 INTRD#

21 Temp Sensor 22 LAN2 ACTLED+

23 NMI_SW# 24 LAN2 ACTLED-

J24 (PSMI): PSMI Connector

1

Pin Signal Pin Signal

1 SMB_CLK 2 SMB_DAT

3 SMBALERT 4 GND

5 V3P3

18

http://www.tyan.com

J40

J39

J38

J41

J42

J13

LED1

J17

J12

19

http://www.tyan.com

J12: LAN3 LED Header

1

Pin Signal

1 LAN3 LED+

2 LAN3 LED-

J13: Chassis Intrusion Header

1

Pin Signal Pin Signal

1 INTRUDER# 2 GND

J17: PCH SGPIO Header

1

0

9

2

1

Pin Signal Pin Signal

1 SMBCLK 2 SDATAOUT0

3 SMBDAT 4 SDATAOUT1

5 GND 6 SLOAD

7 KEY 8 SCLOCK

9 NC 10 HD_ERR_LED

J38/J39/J40/J41/J42: 8-pin 4056 Fan Header

1

8

Use this header to connect the cooling fan to

your motherboard to keep the system at

optimum performance levels.

Pin Signal Pin Signal

1 PWM1 2 +12V

3 TACH1 4 GND

5 GND 6 TACH2

7 +12V 8 PWM2

LED1: ID LED

+

_

Pin Signal

+ P3V3_AUX

- ID_SW_L

State Color Description

On Blue System identified

Off Off System not identified

NOTE: IPMI can activate ID LED from remote site.

Please visit the MiTAC Web Site at http://www.tyan.com

to download

the latest AST2050 or Server Engines Pilot2 Software Configuration

Guide for IPMI settings.

20

http://www.tyan.com

J37

J36

J27

J7

J35

SATA0

SATA1

SATA2

SATA3

SATA4

SATA5

J5

J6

J14

J11

La pagina si sta caricando...

Tyan S5501 Informazioni importanti

Tyan S5501 Informazioni importanti

in altre lingue

Documenti correlati

Altri documenti