Bushnell Trophy Cam HD Manuale utente

TROPHY CAM

™

INSTRUCTION MANUAL

Model#s: 119437 / 119447 / 119476 / 119477

VIDEO

Lit# 98-2294 / 03-12

www.trophycam.eu

FrançaisEspañolDeutschItaliano

Rejoignez la communauté Trophy Cam sur www.trophycam.fr pour :

• Trouverdesinformationssurl’utilisationetlescapacitésdevotreTrophyCam

• Partager vos expériences, vos conseils et astuces avec les autres utilisateurs de la

communautémondialeTrophyCam

• Découvrirdesanimauxdumondeentier

• Accéderàunserviceinternetgratuitpourgéreretpublierlesphotosetvidéosprisesavec

votreTrophyCam(vidéoshébergéessurYouTube)

Visita la web-site de la comunidad Trophy Cam donde quieras y cuando quieras:

• MásinformaciónsobrelascapacidadesyaplicacionesdelasTrophyCam

• Comenta tus experiencias Trophy Cam con otros usuarios, forma parte de esta nueva

comunidad

• Descubreanimalesdetodoslosrinconesdelmundo

• Accedeaunserviciogratuitoparagestionartusfotosyvideoson-lineysubetusfotos(los

videossesubenatravésdeYouTube)

Visita oggi la Trophy Cam Communty del tuo paese, e se possibile:

• cercaulterioriinformazionisullefunzionalitàesulleapplicazionidelleBushnellTrophyCam

• discutiletueesperienzeconleTrophyCamconaltriutenti,condividisuggerimenti,entrain

questanuovacomunitàmondiale

• scopriglianimalidituttoilmondo

• accedialunserviziogratuitopergestireonlinelefoto/videoottenuteconleTrophyCAMe

caricalevostrefoto(ivideosonocaricatisuYouTube)

www.trophycam.fr

www.trophycam.es

www.trophycam.de

www.trophycam.it

Besuchen Sie noch heute die deutsche Throphy Cam Community Internetseite, dort:

• ndenSieweitereInformationenzudenFunktionenundAnwendungenderBushnellTrophy

Cams

• könnenSiemitanderenNutzernderTrophyCamIhreErfahrungenaustauschenundTippsvon

AnwendernausderganzenWelterhalten

• entdeckenSieTiereausderganzenWelt

• haben Sie Zugri auf einen freien Service, um Ihre TrophyCam Bilder/Videos online zu

verwaltenundIhreBilderzuspeichern(VideoswerdenbeiYouTubegespeichert)

3

TABLE OF CONTENTS PAGE

ENGLISH

FRANÇAIS

ESPAÑOL

DEUTSCH

ITALIANO

4-40

41-81

82-125

126-170

171-214

Visit the Trophy Cam community website for your country today, where you can:

• seemoreinformationaboutthecapabilitiesandapplicationsoftheBushnellTrophyCams

• discuss your Trophy Cam experiences with other users, share tips, belong to this new

worldwidecommunity

• discoveranimalsfromallovertheworld

• accessafreeservicetomanageyourTrophyCamphotos/videosonlineandhostyourphotos

(videosarehostedonYouTube)

www.trophycam.eu

www.trophycam.co.uk

4

IMPORTANT NOTE

Congratulations on your purchase of one of the best trail cameras

on the market! Bushnell is very proud of this little unit and we

are sure you will be pleased with it as well. We appreciate your

business and want to earn your trust. Please refer to the notes

below and the instructions in this manual to ensure that you are

completely satisﬁed with this product.

If your Bushnell Trophy Cam does not seem to be

functioning properly or if you are having photo/video quality

issues, please check the Troubleshooting/FAQ section

on pages 33-37.

Problems are often due to something simple that was

overlooked, or require only changing one setting to solve.

If your problem continues after trying the solutions in

the Troubleshooting/FAQ section, please call Bushnell

Customer Service at (800) 423-3537. In Canada, call (800)

361-5702.

Bushnell recommends using a full set of Energizer

®

Lithium AA

batteries (8 or 12, depending on the model) in these Trophy Cam

models to obtain maximum battery life

Do not mix old and new batteries

Do not mix battery types-use ALL lithium or ALL alkaline

Bushnell recommends using SanDisk

®

SD and SDHC Cards

(up to 32GB capacity, Ultra

®

or Extreme

®

series for HD video)

in these Trophy Cam models

5

INTRODUCTION

About the Trophy Cam

The Bushnell Trophy Cam is a digital scouting camera. It can be triggered by

any movement of game in a location, detected by a highly sensitive Passive

Infra-Red (PIR) motion sensor, and then take high quality pictures (up to 8MP

still photos), or video clips.

The Trophy Cam consumes very little power (less than 0.2 mA) in a stand-

by (surveillance) state. This means it can deliver up to six months stand-

by operation time when the device is powered by the full capacity of AA

alkaline batteries, and up to twelve months utilizing lithium AA batteries.

Once motion in the monitored area is detected, the digital camera unit will be

triggered at once (typically within one second) and then automatically take

photos or videos according to previously programmed settings. The Trophy

Cam is equipped with built-in infrared LEDs (“black” IR LEDs on models

119476/119477) that function as a ﬂash, so that it delivers clear photos or

videos (in black & white) even in the dark, and it can take color photos or

videos under sufﬁcient daylight. The Trophy Cam is designed for outdoor

use and is resistant against water and snow.

Your trail camera is one of the latest generation of Bushnell Trophy Cams,

and includes many new or improved features, including:

• Auto PIR Sensitivity-the camera monitors ambient temperature

conditions and automatically adjusts the sensor/trigger signal to be

more sensitive to slight variations in temperature on hot days, less

sensitive on cold days.

• Hyper NightVision-The IR LED Flash array now has increased range,

brighter output and better coverage for improved nighttime images.

• Field Scan 2x with Live Trigger-The “time lapse” feature added in last

year’s models has been enhanced with the addition of the option for

a second block of recording with its own start/stop times. Trigger

signals generated by nearby wildlife activity will still generate additional

photos/videos as they normally would, independently of the Field Scan

operation.

• GPS Geotag Capability-allows the user to input the longitude and

latitude of the camera’s position, which will be embedded in each

photo ﬁle. This enables Google Earth, Picassa and other geotag

6

enabled software to automatically show a map pinpointing each

camera’s location when a group of photos are reviewed on a computer.

Especially useful for those who setup multiple Trophy Cams to monitor

large or widely separated areas.

• Multi Flash Mode (LED Control)- prevents overexposed ﬂash photos in

close range applications

And many more features such as HD Video with Audio, widescreen or

fullscreen format still photos, imprintable camera name (user set) along with

current data including temperature, moon phase and barometric pressure*

(*imprinted barometer data only available on black LED models).

Applications

The Trophy Cam can be used as a trail camera for hunting or scouting

game. It is also suitable for surveillance usage.

PARTS AND CONTROLS

The Trophy Cam provides the following connections for external devices:

USB port, SD card slot, A/V Out, and external DC power in (pg 7, Fig. 1).

A 3-way power switch is used to select the main operating modes: OFF,

SETUP, and ON (pg 7, Fig. 2).

A control key interface with six keys is primarily used in SETUP mode to

select operational functions and parameters. As shown on the next page,

these keys are: UP, DOWN, LEFT, RIGHT, OK and MENU. Four of the keys

can also perform a second function (shortcut operations in SETUP mode) in

addition to their main function: The DOWN key can be used to set the camera

to Photo mode (still camera icon), and the UP key can set the camera to

Video mode (movie camera icon). The RIGHT key also serves as the manual

shutter (“SHOT”) button of the camera and the OK key switches the camera

to the Playback (“REPLAY”) mode. These secondary functions are indicated

by icons or text above the key as shown on the next page.

7

Fig. 2: Button and

Switch Guide

Fig. 1: Connections

USB Port

SD Card Slot

DC In

ON

SETUP

OFF

LED IR Flash

Motion/ Low

Battery Indicator

Lens

Lock Hole

Tripod Socket

DC in

Cover Plug

Video Mic

PIR Sensor

FRONT VIEW

INSIDE VIEW

LCD Screen

Power/Mode

Switch

UP/Video

DOWN/Photo

LEFT

MENU

OK/Replay

RIGHT/Shot

Cable to Battery

Compartment

Latch

Light

Sensor

A/V Out

Video Mic

8

INSTALLING THE BATTERIES AND SD CARD

Before you begin learning how to use your Trophy Cam, you will ﬁrst need

to install a set of batteries and insert an SD card. Although that may only take

you a minute, there are some important notes about both batteries and SD

cards you should be aware of, so please take the time to read the following

directions and cautions:

Loading Batteries

After opening the two latches on the right side of the

Trophy Cam, you will see that the Trophy Cam has

eight or twelve battery slots, depending on your model.

For maximum battery life, you should install a full set

of batteries. The Trophy Cam may also be operated

by just four batteries installed in the ﬁrst slots only

(starting on the top or left-see photos). Battery life will

be shorter with 4 batteries, but the camera will operate

normally. Whether you use 4 or a full set, be sure

to insert each battery with correct polarity (negative

or “ﬂat” end against the long spring of each battery

slot).

Bushnell recommends using a full set of new lithium

AA (Energizer

®

brand) or alkaline AA batteries. NiMh

Rechargeable batteries are not recommended, as the

lower voltage they produce can cause operational

issues. It is also possible to use a lead-acid external

battery cell with 6V output or suitable AC adapter-see

below for more details.

Using an External Power Source (optional, user provided)

Optionally, you can connect an external 6V DC power source to the “DC In”

jack at the bottom of the Trophy Cam. It is recommended to use a power

source with a current output greater than 1550mA. However, during bright

daytime operation when no ﬂash is required, the Trophy Cam can function

with much less current ( >400mA). Please use a compatible power source

cable (not provided) to connect the external DC power source with the power

input jack of the Trophy Cam, making sure that the polarity is correct. Note:

The power connector is a 4.0x1.7mm coaxial DC power plug with positive

“tip” (inside pin) polarity (Radio Shack P/N 274-1532 or equivalent).

9

If both an external power source is connected and batteries are installed, the

Trophy Cam will be powered by the external power source.

When the batteries become weak, the low-battery indicator LED will glow

blue, indicating the batteries should be changed (pg 7, Front View).

Inserting the SD Card

The Trophy Cam has 32MB of internal memory, which can hold only about

20 photos (@ 5MP resolution). This is handy for testing and getting familiar

with the camera, but you will no doubt want to leave the camera unattended

for longer than a day, so using an SD card is recommended for all models.

Insert the SD card (with the camera’s power switch in the OFF position)

before beginning to operate the camera. Don’t insert or remove the SD card

when the power switch is in the ON position.

The Trophy Cam uses a standard SD (Secure Digital) memory card to save

photos (in .jpg format) and/or videos (in .avi format). SD and SDHC (High

Capacity) cards up to a maximum 32GB capacity are supported. High speed

SD cards are recommended if you will use the 1280x720 video resolution

setting (HD). Before inserting the SD card into the card slot after opening the

camera’s front cover, please make sure that the write-protect switch on the

side of the card is “off” (NOT in the “Lock” position). The following describes

how to insert and remove the SD card:

• Insert the SD card into the card slot with its label side upwards (see

below). A “click” sound indicates that the card is installed successfully.

If the wrong side of the card is facing up, you will not be able to insert

it without force-there is only one correct way to insert cards. If the SD

card is not installed correctly, the device will not display an SD card icon

on the LCD in SETUP mode (the SD card icon displayed after switching

to SETUP mode will have a “lock” symbol inside it in it if the card is locked).

Formatting the SD card by using the Trophy Cam’s “Format” parameter

before using it for the ﬁrst time is recommended, especially when a

card has been used in other devices (see “Changing Menu Parameter

Settings” for details).

• To take out the SD card, just gently push in the

card (do not try to pull it out without pushing

in ﬁrst). The card is released from the slot and

ready to be removed when you hear the click.

WARNING: Be sure the camera’s power is switched OFF

before inserting or removing SD cards or batteries.

10

USING THE TROPHY CAM

Once you’ve prepared your Trophy Cam by properly installing batteries and

an SD card, you could simply take it outside, strap it to a tree, switch it on

and leave-and you might get some great photos that are exactly what you

wanted. However, we highly recommend that you ﬁrst spend some additional

time indoors with this manual and your camera until you know a bit more

about what the 3-way switch and those control keys do. If nothing else, you’ll

probably want to at least set the date and time so the camera will imprint

them (or not-it’s your option) on your photos as they are taken, learn how to

set the camera to shoot video clips instead of still photos if you like, and read

some tips about mounting it on a tree.

THE OFF, ON, AND SETUP MODES

The Trophy Cam has three basic operational modes:

• OFF mode: Power switch in the OFF position.

• ON mode: Power switch in the ON position (LCD screen is off.)

• SETUP mode: Power switch at SETUP position (LCD screen is on).

OFF MODE

The OFF mode is the “safe” mode when any actions must be taken, e.g.,

replacing the SD card or batteries, or transporting the device. You will also

use OFF mode if you connect the camera to a computer’s USB port later

to download your photos/videos. And of course, when you are storing or not

using the camera, you will switch it to OFF. Please note that even in the OFF

mode the Trophy Cam still consumes power at a very low level. Therefore,

it’s a good idea to take the batteries out of the battery compartment if the

camera will not be used for a long time.

ON MODE

Anytime after the batteries and SD card have been inserted, you can switch

on the camera. When the power switch is moved to the top position, the

camera will enter into the ON (Live) mode. The motion indicator LED (pg. 6,

“Front View”) will blink red for about 10 seconds. This interval allows time for

you to close the Trophy Cam’s front cover, lock it, and leave the monitored

area. Once in the ON mode, no manual controls are needed or possible

(the control keys have no effect). The Trophy Cam will take photos or

11

videos automatically (according to its current parameter settings) when it is

triggered by the PIR sensor’s detection of activity in the area it covers.

You can either move the power switch directly from OFF to ON mode, or

stop at the SETUP position ﬁrst to change one or more settings, then move

the switch to ON after you have ﬁnished doing so.

SETUP MODE

In the SETUP mode you can check and change the settings of the Trophy

Cam with the help of its built-in LCD (or a monitor connected to the TV out

jack). These settings, found in the SETUP Menu, let you change the photo

or video resolution, interval between photos, switch the time imprint on, etc.

Moving the power switch to the SETUP position will turn on the LCD display,

and you will see an information screen that shows how many images have

been taken, the battery level, camera or video mode, etc (Fig. 3, next page).

NOTE: Always move the power switch from OFF to SETUP mode. It

is possible that the camera could lockup if it is switched from ON to

SETUP mode. If this occurs, simply move the switch to OFF and then

push it up to SETUP again.

SETUP Mode Shortcut Keys/Functions

As mentioned earlier in “Parts & Controls”, four of the keys below the LCD

have secondary, “shortcut” functions when the camera is switched to

SETUP mode (but the MENU key has not been pressed):

• Press the UP key to quickly set the camera to shoot video clips.

• Press the DOWN key to quickly set the camera to take still photos.

• Press the RIGHT key to manually trigger the shutter. This is useful

for testing the camera-make sure you are in SETUP mode, press the

RIGHT key, and a few seconds later a photo or video (depending on

how the camera was set) will be saved to the SD card (or internal

memory if no card is inserted). The “number of images taken” counter

on the bottom left of the LCD will increase by one. If the display

indicates “SD PROTECTED” when you press the SHOT key, switch

the camera OFF, remove the SD card and slide its protect switch off.

• Press the OK key to replay (review or playback) photos/videos on the

LCD (119477 color viewer model only), or a connected TV monitor

(std. display models). See “Playing Back/Deleting the Photos/Videos”

(pg. 29) for more details.

12

2

Fig. 3: SETUP Information Screen (standard display model shown)

Still Photo Mode

Time Stamp

Field Scan On

# of Photos Taken Remaining Photo Capacity

Date:Month-Day-Year

Battery Level

Image Size (Resolution)

SD Card Status

Time

Hour:Minute:Second

Camera (Still Photo) Mode

Video Mode

Video Sound On

Video Resolution

Available Video Recording Time

Video Mode

13

USING THE SETUP MENU TO

CHANGE SETTINGS

The main purpose of the SETUP mode is to allow you to change the settings

of the camera’s parameters (18 different ones are available!) so your Trophy

Cam operates exactly the way you want it to. You will do this by entering the

SETUP Menu and pressing the keys below the LCD display, which will show

you each parameter and its setting.

Changing Parameter Settings in SETUP Mode

A wide range of options or “parameters” are provided to allow you to set

the Trophy Cam to your operational preferences. To change the setting of

any parameter you must ﬁrst switch to the SETUP mode. Once in SETUP

mode, pressing the MENU button will allow you to select any parameter and

change its setting. The name of the parameter and its current setting will be

shown on the LCD. Pressing the RIGHT or LEFT key scrolls to the next or

previous parameter (RIGHT key to move on to the next parameter and LEFT

key to go back to the previous parameter), and pressing the UP or DOWN

key lets you select a different setting for the currently displayed parameter.

Once you have selected your preferred new setting for a parameter, press

the OK button to save the new setting (actually change it). When you are

ﬁnished changing the settings of one or more parameters, press MENU

again to exit the SETUP menu. MENU can also be pressed anytime you

want to cancel changing a parameter’s setting after a new setting has been

selected (but OK has not been pressed yet). After setting the parameters

to your preferences, be sure to move the switch to ON to begin actually

taking photos or videos. No images will be captured if the switch is left in the

SETUP position (unless you press the RIGHT/Shot key after exiting the menu)-

in fact, the camera will power off automatically after a few seconds with no

key pressed.

Color Viewer vs. Standard Display Models

There is a slight difference in how the settings for a parameter are shown

between the two different types of Trophy Cam models:

• OnthecolorLCD displaymodel(119477),all the available settings

for the currently displayed parameter are shown on one screen, with a

checkmark next to the current setting (Fig. 4a). To change the setting, ﬁrst

use the UP/DOWN keys to highlight (select) the new setting you want

(Fig. 4b), then press OK to “Execute” the actual change to the selected

14

COLOR VIEWER

(119477 only)

(4a)

(4b)

(4c)

Fig. 4: Selecting Parameter Settings

setting. The checkmark will appear next to your new setting to conﬁrm this

(Fig. 4c).

• On models with standard (non-color) display, only one setting is

displayed at a time, starting with the current setting for the parameter

when it is ﬁrst selected (Fig. 4d). To change the setting, use the UP/

DOWN keys to display the new setting you want (Fig. 4e), then press

OK to “Execute” (make the actual change to this setting). If you want to

conﬁrm this setting is now the current one, just press the RIGHT key

to scroll to the next parameter, then press LEFT to go back again to the

previous one. You should see the parameter setting you just made.

STANDARD DISPLAY

(4d)

(4e)

Press MENU

Press DOWN

Press OK

15

EXAMPLES-Changing the Settings of Some Common

Parameters

Following this page, you will ﬁnd tables listing all of the parameters found in

the SETUP Menu, along with their possible settings (or range of settings),

and a detailed description of what the parameter controls and what

the settings do. If you read the previous section detailing how to select

parameters and change their settings, you should be able to dive right in, ﬁnd

the parameter(s) you want, and setup the camera to suit your preferences.

But maybe you’d rather walk through an example or two ﬁrst:

To change any parameter’s setting, always start with the power switch in the

SETUP position. After the LCD comes on, press the MENU key.

The ﬁrst parameter you will see when you ﬁrst enter the SETUP Menu

is “Mode”. To change it from its default setting of “Camera” (still photos)

to “Video” (shoot video clips), press the DOWN key to highlight “Video”

(119477 only) or to select the “Video” setting (std. display models). Press the

OK key to “Execute” (Set) the new setting you’ve selected for this parameter.

Now press the RIGHT key to move to another parameter in the Menu.

Pressing it three times will take you to “Capture Number”. Try using the UP

and DOWN keys to scroll through the range of settings, then press OK to

lock in your setting for the number of photos the camera takes each time it's

triggered.

Pressing the RIGHT key until you reach the last menu item, you'll see the

“Default Set” parameter. Highlight or select “Execute” (using UP or DOWN)

and press OK to restore all parameters (including the Mode and Video

Length parameters you changed a minute ago) back to their original factory

default settings. The default settings for each parameter are indicated in bold

type in the SETUP Menu tables on the next several pages.

Be sure to set the current date and time, using the “Set Clock” parameter, if you

choose to change the “Time Stamp” parameter setting to “On” since that will tell

the camera to imprint the date and time on each of the images it captures.

16

Field Scan 2x with Live Trigger Feature

Field Scan is a revolutionary new feature for the Bushnell Trophy Cam,

which allows you to monitor your food plots or ﬁeld edges with time lapse

images or video. When set to “On”, the Trophy Cam will take a photo (or

record a video clip) automatically at your choice of intervals (for example,

once every ﬁve minutes) during one or two blocks of time you set up for each

day, without requiring a trigger from an active animal. This has the

advantage of giving you the ability to monitor the edge of a ﬁeld that might

be 50 or 150 yards away from the camera out of the PIR sensor’s range. The

result is an effective range much greater than it would normally be, with the

camera dependant on triggers generated by nearby animals. This is a great

tool for hunters to scout an entire ﬁeld with only one camera.

If an animal does enter the area covered by the PIR sensor and generate a

trigger event during a time in between the Field Scan intervals you set, the

camera will capture an image or video just as it normally would, based on

your other menu settings. Here’s how to setup and use Field Scan (be sure

you’ve set the current time in “Set Clock” ﬁrst, so your Field Scan recording

will stop and start at the correct times of day):

1. Move the main switch to SETUP, then press MENU.

2. Keep pressing the RIGHT key, stepping through the Setup Menu until

you reach Field Scan.

3. Press the UP key to select On, and press OK (Step 1, pg.18). You will

see "A", representing the ﬁrst block of time you can deﬁne (a second

block of time later in the day, "B" can also be setup if you wish). Press

OK (Step 2). This takes you to the screen to set Start and Stop times,

which determines the clock times when the ﬁrst block of Field Scan

recording will begin and end for each day. You can set these times to

the exact hour and minute you want, for a recording “window” that

lasts anywhere from just a minute to a full 24 hours.

4. Set the [Start] and [Stop] times, beginning with the Start hour, using

the UP/DOWN keys to change the setting (Step 3). The hour setting

is based on a 24-hour clock, with “00” hours = midnight, “12” hours

= noon, “23” hrs = 11PM, etc. To move to the next setting, press the

RIGHT key, change the minute for the Start time with UP/DOWN,

then on to the hour and minute settings for the Stop time.

17

5. After you ﬁnish setting the Stop minutes, press OK to conﬁrm your

settings for the ﬁrst block of Field Scan recording. If desired, you can

create a second block of time by pressing the DOWN key to select "B"

(Step 4), then press OK and follow the same process to set Start and

Stop times for Field Scan block "B" (Step 5). As an example of how you

might use these two available time blocks, you could setup Field Scan

time block "A" for the dawn hours from 6 AM to 8 AM, and block "B"

to capture images between 5:30 and 7 PM. No Field Scan recording

would occur from 8AM to 5:30PM, or from 7PM to 6AM.

6. After setting Start/Stop times to deﬁne Field Scan block "A" and/or

"B", press OK, then press the UP or DOWN key to select "Interval"

and press OK (Step 6). The Field Scan "Interval" setting lets you

control how often a photo or video clip is recorded during the block(s)

of time you deﬁned with the Start and Stop settings. Your options are

60 minutes, 30 minutes, 15 minutes, 5 minutes (this is the default), or

1 minute (still photo mode only). Use the UP/DOWN keys to select

your preference, then press OK to save it (Step 7). Note that for videos,

"Interval" is independent of the Length of each video recording-it’s

how often videos are recorded, not how long each one lasts.

7. Here’s an example of how the camera would operate, based on the

following Field Scan settings:

Field Scan: On

Field Scan A:

[Start]: 6:00

[Stop]: 8:00

Field Scan B:

[Start]: 17:30

[Stop]: 19:00

Interval: 15M

These settings would cause the camera to capture a photo (or video,

if the camera is set to that mode) once every 15 minutes, beginning at

6 AM, until the Field Scan "A" recording block stops at 8:00 AM. Later

that day, the camera would again take a photo or video every 15 minutes

between 5:30 PM and 7:00 PM (during Field Scan time block "B").

The next day, the camera would again record an image or video once

every 15 minutes between 6:00 and 8:00 AM, and between 5:30 and

Note: avoid any "overlap" of Field

Scan A & B recording blocks when

setting their start and stop times,

to assure correct operation.

18

7:00 PM. No Field Scan recording would occur from 8AM to 5:30PM,

or from 7PM to 6AM. Remember, Field Scan recording is independent

of normal triggers due to animal activity–even if no animals enter the IR

sensor coverage zone, an image or video will still be captured every 15

minutes during the block(s) of time. If an animal triggers the camera “in

between” the 15 minute intervals, it will be recorded, same as it would

if you had setup the camera with Field Scan turned Off. Note: Field

Scan settings of frequent intervals and/or long periods between

start and stop time can reduce battery life.

(Step 1)-set Field

Scan Mode to “On”

(Step 2)-select Field

Scan "A" (press OK)

(Step 3)-set Field

Scan "A" Stop & Start

(Step 4) (opt)-select Field

Scan "B" (press OK)

(Step 5) (opt)-set Field

Scan "B" Stop & Start

Steps 4 & 5 are

optional (only

required if you want

to set up a second

block of Field Scan

recording with

different stop and

start times)

(Step 6)-select Field

Scan "Interval"

(Step 7)-set Field

Scan Interval

Note: the Interval

Setting sets the

timing between each

image for both Field

Scan "A" and "B"

recording blocks.

19

Parameter

Settings

(Bold=default)

Description

Mode Camera or

Video

Selects whether still photos or

video clips are captured when the

camera is triggered.

Image Size

(only aects

still photos)

3M Pixel,

5M Pixel,

8M Pixel,

Selects resolution for still photos

from 3 to 8 megapixels. Higher

resolution produces better quality

photos, but creates larger ﬁles

that take up more of the SD card

capacity (ﬁlls up faster). 5M is a

good compromise between quality

and ﬁle size.

Image Format

(only aects

still photos-for-

mat for video

is tied to Video

Size)

Full Screen,

Wide Screen

Selects 4:3 (Fullscreen, like old

TV sets) or 16:9 (Widescreen, like

new ﬂat TVs) “aspect ratio” for

still photos. If you like to view your

photos on a TV set or computer

monitor, you can set the format to

match it.

Capture

Number

(only aects

still photos)

1 Photo,

2 Photo,

3 Photo

Selects how many photos are

taken in sequence per trigger

in Camera mode. This setting

affects photos taken in Field Scan

mode as well (to snap two photos

every 10 minutes, for example).

Please also refer to the Interval

parameter.

The SETUP Menu – Parameters and Settings List

w/Descriptions

20

Parameter

Settings

(Bold=default)

Description

LED Control

(Multi-Flash

feature)

Low, Medium,

High

Controls how many LED lamps

ﬁre when images are taken in low

light. “High”=all 32 LEDs ﬁre,

which is the default setting. Set to

Medium or Low if you are getting

overexposed ﬂash photos or will

place the camera at very close

range to the subject you want to

photograph. Note: in video mode,

24 LEDs ﬁre in both High &

Medium (default) settings. Set to

Low if videos are overexposed.

Camera

Name

(Input)

See "Using the

Setup Menu

Input Screens"

Allows the user to set a custom

name for the camera. Useful for ID

purposes when multiple cameras

are setup, since each camera will

imprint its name on all photos/

videos it captures.

Video Size

(only aects

video clips)

1280x720,

640x480,

320x240

Selects video resolution (in pixels

per frame). Higher resolution

produces better quality videos, but

creates larger ﬁles that take up

more of the SD card capacity (ﬁlls

up faster). The default 640x480

is VGA video in standard 4:3

format. The 1280x720 setting

provides “widescreen” format HD

video. Using high speed SD cards

(SanDisk

®

Ultra

®

or Extreme

®

series or similar) is recommended

if you will use the 1280x720 video

setting.

La pagina sta caricando ...

Bushnell Trophy Cam HD Manuale utente

Bushnell Trophy Cam HD Manuale utente

in altre lingue

Documenti correlati

Altri documenti