Pulsar Nightvision Helion 2 XP Manuale del proprietario

Operating Instructions

HELION XP2

Thermal Imaging Scopes

Attention! Helion 2 thermal imaging monoculars require a license if exported outside

your country.

Para obtener información detallada acerca del dispositivo, descargue el manual de

usuario al completo: www.pulsar-vision.com/products/thermal-imaging-scopes

Attenzione! I monocoli termici Helion 2 necessitano una licenza se esportati al di fuori

del proprio paese.

Questo prodotto è conforme alla norma europea EN 55032:2015, Classe A.

Per informazioni dettagliate sul dispositivo, scaricare il manuale d'uso completo:

Данный продукт соответствует требованиям европейского стандарта EN

55032:2015, Класс А.

Внимание! Тепловизионные монокуляры Helion 2 требуют лицензии, если они

экспортируются за пределы Вашей страны.

Электромагнитная совместимость.

Для получения подробной информации о приборе скачайте полное руководство

по эксплуатации:

Avvertenza: l'uso di questa apparecchiatura in un'area residenziale può causare

perturbazioni radioelettriche.

http://www.pulsar-vision.com/ru/products/thermal-imaging-scopes

Compatibilità elettromagnetica

www.pulsar-vision.com/products/thermal-imaging-scopes

Compatibilidad electromagnética

Внимание: эксплуатация данного продукта в жилой зоне может создавать

радиопомехи.

Este producto cumple con la reglamentación de la UE EN 55032:2015, Clase A.

Advertencia: el funcionamiento de este equipo en áreas residenciales podría causar

radio interferencias.

Attention! L'utilisation de ce matériel dans un environnement résidentiel peut

produire des interférences radio.

¡Atención! Los monoculares de visión térmica Helion 2 requieren una licencia si se

exportan fuera de su país.

Electromagnetic compliance

Ce produit est conforme à la norme européenne EN 55032:2015, Classe A.

Pour des informations détaillées sur la lunette, prière de télécharger le manuel

complet d'utilisation: www.pulsar-vision.com/products/thermal-imaging-scopes

For detailed information about the device, please download the complete user manual:

www.pulsar-vision.com/products/thermal-imaging-scopes

Compatibilité électromagnétique

Achtung! Wärmebildgeräte Helion 2 benötigen eine Lizenz, wenn sie außerhalb Ihres

Landes exportiert werden.

Attention! Les monoculaires d'imagerie thermique Helion 2 nécessitent une licence

s'ils sont exportés hors de votre pays.

Elektromagnetische Verträglichkeit

Warning! Operation of this equipment in a residential environment could cause radio

interference.

Das Produkt entspricht der Europäischen Norm EN 55032:2015, Klasse A.

Warnung! Der Betrieb dieses Gerätes im Wohngebiet kann Funkstörungen verursachen.

Für detaillierte Informationen über das Gerät, bitte das vollständige Handbuch

herunterladen: www.pulsar-vision.com/products/thermal-imaging-scopes

This product complies with EU Standard EN 55032:2015, Class A.

EN

FR

DE

ES

IT

RU

v.0320

Thermal Imaging Scope Helion 2

1-26

27-52

53-80

81-108

109-134

Lunette d'imagerie thermique Helion 2

Wärmebildgerät Helion 2

Monocular térmico Helion 2

Termovisore Helion 2

Тепловизор Helion 2

135-160

ÐÓÑÑÊÈÉ

2

1

MODEL HELION 2 XP50

SKU 77402

MICROBOLOMETER

Type uncooled

Resolution, pixels 640х480

Frame rate, Hz 50

Pixel size, microns 17

OPTICAL SPECIFICATIONS

Magnification ratio, x 2.5

Smooth digital zoom, x 2.5 - 20

Digital zoom x2/ x4/ x8

Lens F50 mm,F/1.2

Field of view angle (horizontal), deg 12.4

Eyepiece focusing range, diopters ±5

Detection distance for deer-sized objects, m (y) 1800(1970)

DISPLAY

Type AMOLED

Resolution (pixels) 640х480

OPERATIONAL CHARACTERISTICS

Power supply, V 3 - 4.2

Battery Type/Capacity/Nominal output voltage Li-ion Battery Pack IPS7/

6400 mAh/ DC 3.7 V

External power supply 5 V (USB)

Battery run time (at t=22 °C)*, h 10

Protection degree, IP code (IEC60529), with

battery installed

IPX7

Operating temperature range, °C (°F) -25…+50 (-13…+122)

Dimensions, mm/ inch 234х55х58/ 9.21x2.17x2.28

Weight without battery, kg / oz 0.5/ 17.64

VIDEO RECORDER

Video/photo resolution, pixels 640х480

Video/photo formats .avi / .jpg

Built-in memory 16 GB

Built-in memory capacity About 8 hours of video

or more than 100 000 photos

WI-FI CHANNEL

Frequency 2.4 GHz

Standard 802.11 b/g

Reception range in direct line of sight, m 15



* Actual battery life may vary depending on the use of Wi-Fi and the built-in

video recorder.

The product design improvements are possible to make it more appealing for

the consumer.

Wi-Fi. Remote control and viewing using smartphone

YouTube. Direct video streaming and recording to the Internet via

smartphone using the Stream Vision application

Built-in video and sound recorder

Integration with macOS and Android based mobile devices

VIDEO RECORDING

Charging IPS7/IPS14 batteries via USB

Operation on АА batteries **

Quick-release Li-Ion battery packs IPS7/IPS14

Operating time in Wi-Fi mode up to 20 hours*

BATTERY PACK:

EXTERNAL VIEW AND CONTROLS

Helion 2 Thermal Imaging

Scope

IPS7 Battery Pack

Battery charger with mains

charger

USB cable

PACKAGE CONTENTS

This product is subject to change in line with improvements to its design.

The latest edition of this user manual is available online at www.pulsar-vision.com

Carrying case

Hand strap

Quick start guide

Lens cloth

Warranty card

HELION 2 thermal imaging scopes are based on an IR sensor (uncooled

microbolometer) and designed for the use both in the night-time and

during the day in adverse weather conditions (fog, smog, rain) to see

through obstacles hindering detection of targets (branches, tallgrass,

thick bushes etc.).

HELION 2 thermal imaging scopes do not require an external source of

light and are not affected by bright light exposure.

HELION 2 thermal imaging scopes are designed for various areas of

application including night hunting, observation, trail orienteering, rescue

operations etc. night hunting, observation, trail orienteering, rescue

operations etc.

DESCRIPTION

User-friendly interface

Eight colour palettes for observation

Image Detail Boost function

Display off option

Wide range of operating temperatures (-25 °С …+50 °С)

Defective pixel repair function

Functional and ergonomic design

Four operating modes: forest, rocks, identification, user

Three calibration modes – Manual, Semi-automatic, Automatic

Stadiametric rangefinder

Updatable features

FEATURES

2

3

** using special battery container (sold separately).

* on Battery Pack IPS14 (sold separately).

5

6

7

8

9

10

11

1

2

3

4

Micro-USB port

Lens focusing ring

Eyeshade

Navigation button DOWN

Battery Pack

Button MENU

Navigation button UP

Power on/off button ON

Latch for lens change

Lens cover

Dioptre adjustment ring

Recording button REC

Radiator cooling system

Lever for battery pack

12

13

14

4

3

ON (11)

Device is off

OTHER SHORT

PRESSES

LONG PRESS

Turn display off/

Power device off

USING THE BATTERY PACK

Helion 2 thermal imaging scopes are supplied with a rechargeable

Li-Ion Battery Pack IPS7 which allows operation for up to 10 hours.

Please remember to charge the Battery Pack before first use.

DESCRIPTION OF CONTROLS

OPERATING MODE

6

5

FIRST SHORT

PRESS

Power device on

Calibrate the sensor

Display OFF

mode

Turn display on

Calibrate the sensor

Device is on

Calibrate the sensor

UP (10)

Regular

(viewing)

Color palettes

Main menu

Navigation upwards/rightwards

Quick menu

Operating modes

Changes parameters

MENU

(9)

Regular

(viewing)

Main menu

Quick menu

Enter quick menu

----

Enter main menu

Confirm selection

Switch between quick menu options

Exit submenu without

confirming selection /

Exit menu

(switch to

viewing mode)

DOWN

(8)

Regular

(viewing)

Main menu

Quick menu

Control digital zoom step-up

PiP on/off

Navigation downwards/leftwards

Changes parameters

REC

(7)

Video mode

Start video

recording

Pause / resume

video recording

Stop video recording /

Switch to photo mode

Photo mode

Take a photograph

Switch to video mode

Charging:

BUTTON

M

6

5

----

C

D

E

Charging

base

Battery Pack

Charger

110-240V socket

Pic. 3

If the indicator of the charger lights red continuously upon battery

installation, probably the battery's charge level is lower than

acceptable (the battery has been long in deep discharge). Keep the

battery in the charger for a long time (up to several hours), remove

and re-insert it. If the indicator starts blinking green, the battery is

good; if it keeps lighting red it's defective. Do not use the battery!

Connect the Micro-USB plug of the USB cable to the port (E) of the

charger.

Insert the plug of the charger to the 110-240V socket.

Remove the protective cover from the Battery Pack.

- once if the battery charge ranges from 0% to 50%;

Upon installation, a green LED indicator (D) on the charging base

will start to glow and begin flashing:

- twice if the battery charge ranges from 51% to 75%;

If the indicator lights green continuously, the battery is fully charged.

You can remove the battery from the charger by lifting the lever (C).

- three times if the battery charge ranges from 76% to 100%;

Connect the Micro-USB plug to the charger.

Lift the lever (C) of the charging base.

Install the Battery Pack into the charging base as shown in Pic.3;

click the lever (C).

6

7

8

Remove the protective cover from the Battery Pack.

Fix the battery by clicking the lever.

Lift the lever (13).

Install the battery into the dedicated slot on the device housing so that

element F (Pic.2 on the flyleaf) appears from below.

INSTALLATION:

Never use a modified or damaged charger.

Keep the battery out of the reach of children.

The Battery Pack is short circuit protected. However, any situation

that may cause short-circuiting should be avoided.

Do not charge the battery immediately after bringing the

battery from cold environment to a warm one. Wait for 30-40

minutes for the battery to get warm.

Do not leave the Battery Pack with a charger connected to the

mains longer than 24 hours after full charge.

Do not connect external device with a current consumption that

exceeds permitted levels.

Do not expose the battery pack to high temperature or to a naked

flame.

Do not use the battery at the temperatures above those shown in

the table – this may decrease battery's life.

Only use the charger supplied with the Battery Pack. The use of any

other charger may irreparably damage the Battery Pack or the

charger and may cause fire.

Do not drop or hit the battery.

Otherwise batter's life will decrease significantly.

Do not dismantle or deform the Battery Pack.

Do not submerge the battery in water.

When keeping the battery for a long period, the battery should

not be fully charged or fully discharged.

Do not leave a battery unattended while charging.

Charge the Battery Pack at a temperature from 0 °C to +45 °C.

When using the battery at negative temperatures, battery's capacity

decreases, this is normal and is not a defect.

SAFETY MEASURES:

EXTERNAL POWER SUPPLY

7

The device can be powered with an external power supply such as Power

Bank (5V).

Connect the external power supply to the USB port (4) of the device

(Pic. 1 on the flyleaf).

The device switches to operation from external power supply, and the

IPS7 Battery Pack will begin slowly charging.

When the external power supply is disconnected, the device switches

to the internal battery pack without powering off.

The display will show the battery icon with charge level as a

percentage.

Attention! Charging IPS7/IPS14 batteries at air temperatures below

0 °C can result in reduced battery life. When using external power,

connect Power Bank to the switched-on device, which have worked

for several minutes.

If the device operates on external power supply but the IPS7 battery is

not connected, the icon is shown.

OPERATION

WARNING! The radiator cooling system (14) becomes warm during

operation: this is normal and allows an increase in the sensitivity of

the device.

WARNING! Do not point the objective lens of the unit at intensive

sources of light such device emitting laser radiation or the sun. This

may render the electronic components inoperative. The warranty

does not cover damage caused by improper operation.

Powering on and image setup

8

To set up display brightness and contrast and continuous zoom,

please refer to the QUICK MENU FUNCTIONS section.

Open the lens cover (1).

Turn the unit on with a short press of the ON (11) button .

To obtain a crisp image of the icons on the display, rotate the dioptre

adjustment ring (6). After this there is no need to rotate the dioptre

adjustment ring for distance or any other conditions.

To focus on the object being observed rotate the lens focusing ring (2).

After use, hold down the ON button to turn the unit off.

SENSOR CALIBRATION

9

Calibration allows levelling of the background temperature of the

microbolometer and eliminates image flaws (such as frozen image,

vertical stripes etc.).

There are three calibration modes: manual (M), semi-automatic (SA) and

automatic (А).

Select the desired mode in the menu option “CALIBRATION” .

Mode А (automatic). The device calibrates by itself according to the

software algorithm. You do not have to close the lens cover (the

sensor is closed with the internal shutter automatically). User

assisted calibration with the ON button is allowed in this mode (in

semi-automatic mode).

Mode SA (semi-automatic). Calibration is activated with a short

press of the ON button. You do not have to close the lens cover (the

sensor is closed with the internal shutter automatically).

Mode М (manual). Close the lens cover, turn the device on with a

short press of the ON button (11). Having finished calibration, open

the lens cover.

9

10

Enter the menu with a short press of the М (9) button.

To toggle between the functions below, press successively the M

button.

Brightness – press the UP (10)/ DOWN (8) buttons to change

display brightness from 0 to 20.

The stadiametric rangefinder – press the UP/DOWN buttons to

change the distance between the special mark points to determine

the distance to the observed object.

Digital zoom – press the UP/ DOWN buttons to change zoom

from 2.5x to 20x. Continuous digital zoom is in 0.1x increments.

The initial value of the continuous digital zoom is x1.0 if the step-up

digital zoom is not active.

Contrast – press the UP/ DOWN buttons to change display

contrast from 0 to 20.

STEP-UP DIGITAL ZOOM

10

The device allows you to quickly increase the basic magnification

(please refer to the line in the specifications table) by two “Digital zoom”

times or four times or eight times, as well as to return to the basic

magnification. To operate the step-up digital zoom, press successively

the button. DOWN (8)

QUICK MENU FUNCTIONS

11

The Quick menu allows change of basic settings (display brightness and

contrast, continuous digital zoom and stadiametric rangefinder).

Enter the main menu with a long press of the М (9) button.

Enter a menu option with a short press of the М button.

Exit the menu with a long press of the М button.

Automatic exit takes place in 10 sec of inactivity.

Upon exit from the menu the cursor location is memorized only for

the duration of the working session (i.e. until the unit is turned off).

Upon restarting the device and entering the menu the cursor will be

located on the first menu option.

Menu navigation is cyclical: as soon as the last menu option of the

first tab is reached, first menu option of the second tab starts.

Press the UP (10)/ DOWN (8) buttons to switch between the menu

options.

MAIN MENU FUNCTIONS

12

TAB 1

MENU CONTENTS:

TAB 2

Wi-Fi activation

General settingsMenuMenu

Black Hot

10

Basic mode – it allows you to select one of the three modes

as the basic one for the user mode.

Notes. Display brightness and contrast settings are saved in the

memory when the unit is turned off.

Exit the quick menu with a long press of the M button or wait 10

seconds to exit automatically.

12

11

Menu contents and description

Wi-Fi

Wi-Fi ON/OFF

Oﬀ

Turn Wi-Fi on with a short press of the M (9) button.

Turn Wi-Fi off with a short press of the M (9) button.

Mode

= A short press of the Menu button confirms the

selection.

= Select one of the settings described below with

the UP / DOWN buttons.

The devices have four operating modes of the

thermal imager: Forest (observation mode of

objects within low thermal contrast conditions),

Rocks (observation mode of objects within high

thermal contrast conditions), Identification (high

detalization mode), User (individual brightness and

contrast settings).

= Select the 'Mode' option.

= Press and hold the Menu button to enter the

menu.

= A short press of the Menu button opens the menu.

FOREST MODE – This is the best mode when

searching and observing within field conditions,

against the background of leaves, bushes and

grass. The mode is highly informative about an

object being observed as well as landscape details.

ROCKS MODE – This is the best mode when

observing objects after a sunny day or within urban

conditions.

USER MODE – It allows you to configure and save

custom brightness and contrast settings, as well as

one of the three modes as basic.

IDENTIFICAION MODE – This is the best mode

when observing objects within adverse weather

conditions (fog, mist, rain and snow). It allows you to

recognize the characteristics of an object being

observed more clearly. Zoom increase may be

accompanied by insignificant image graininess.

Calibration

Selection of calibration mode.

= Enter the submenu with a short press of the M

button.

There are three calibration modes: manual (M),

semi-automatic (SA) and automatic (А).

= Confirm selection with a short press of the M

button.

= Enter the main menu with a long press of the M

button.

= Select one of the below calibration modes with

UP (10)/ DOWN (8) buttons.

Color palettes

Black Hot – white colour corresponds to low

temperature, black colour – to high temperature;

Hot Red; Red Monochrome; Rainbow;

Ultramarine; Violet; Sepia.

Basic image mode is “White Hot”. Menu option

"Colour palettes" allows you to select an

alternative palette.

Note: a long press of the UP button (10) also

activates the change between the Hot White

palette and the pallet chosen in the main menu.

Selection of colour palettes

= Select one of the palettes below with a short

press of the UP (10)/ DOWN (8) buttons.

= Enter the main menu with a long press of the M

(9) button.

= Enter the submenu with a short press of the M

button.

= Confirm selection with a short press of the M

button.

Graphics

brightness

= Hold down the M (9) button to enter the main

menu.

Graphics brightness

= Set the desired graphics brightness (menu and

status bar icons) from 0 to 10 with UP/DOWN

buttons.

= Press briefly the M button the enter the submenu.

= Select submenu with UP (10) and DOWN (8)

buttons.

= Confirm your selection with a short press of the M

button.

Image Detail

Boost

Turn on/off Image Detail Boost

= Press and hold down the М (9) button to enter the

main menu.

= Select the Image Detail Boost menu option with

the UP (10) / DOWN (8) buttons.

= Turn Image Detail Boost on/off with a short press

of the M (9) button.

The “Image Detail boost” function increases the

sharpness of the contours of heated objects, which

increases their detail. The result of the function

depends on the selected mode and observation

conditions: the higher the contrast of objects, the

more noticeable the effect. This option is enabled by

default, but can be disabled in the main menu.

Note: Quick activation of the operating modes is

possible by using the UP button. Short press of the

UP button activates the switching of the operating

modes.

14

13

= Access level Owner. The Stream Vision user has

the complete access to all device's functions.

= Access level Guest. The Stream Vision user has

the access only to the real time video stream from

the device.

Settings

The following settings are available:

English

= Enter the submenu "Language" with a short

press of the M button.

Language selection

= Select one of the available interface languages

with a short press of the UP/ DOWN buttons:

English, French, German, Spanish, Russian.

= Switch between languages with a short press of

the M button.

= Save selection and exit the submenu with a long

press of the M button.

Meters

M

Y

= Select the desired Units of measure with a short

press of the UP/ DOWN buttons, press M again.

= Enter the submenu "M/Y" with a short press of

the M button.

= Menu exit will take place automatically.

Selection of units of measurement

Format

This menu option allows you to format your device's

Flash card or memory card (erase all files from its

memory).

= Confirm selection with a short press of the M

button.

= Message «Memory card formatting» means

that formatting is in progress.

= With a short press of the UP/ DOWN buttons

select “Yes” to format the memory card or “No”

to return to the submenu.

= Upon completion of formatting the message

«Formatting completed» is shown.

Formatting

= Enter the Format submenu with a short press of

the M (9) button.

= If “Yes” is selected, display will show “Do you

want to format memory card?” and “Yes” and

“No” options. Select “Yes” to format the memory

card.

= If “No” is selected, formatting is aborted and you

return to the submenu.

Language

Date

= Enter the submenu "Date" with a short press of

the M button. Date format is displayed as:

YYYY/MM/DD (year/month/day)

Date setup

Time

= Select hour value with a short press of the UP/

DOWN buttons.

= Select the desired time format with a short press

of the UP/ DOWN buttons: 24 or PM/AM.

Time setup

= Switch to minute setup with a short press of the M

button.

= Switch to hour setup with a short press of the M

button.

= Save selected time format and exit the submenu

with a long press of the M button.

= Enter the submenu "Time" with a short press of

the M (9) button.

= Select minute value with a short press of the UP/

DOWN buttons.

Units of

measure

= Save the password and exit the submenu with a

long press of the M button.

= Set the desired password with the UP (10) and

DOWN (8) buttons (button UP to increase value;

button DOWN to reduce). Switch between digits

with a short press of the M button.

The password is used to connect an external device

(i.e. smartphone) to your thermal imager.

= Enter the submenu "Wi-Fi" with a short press of

the M (9) button.

= The default password 12345678.

Access

level setup

Owner

Guest

This menu option allows you to set required access

level of the Stream Vision application to your

device.

Access level setup

Password

setup

= Select the correct values for the year, month and

date with a short press of the UP/ DOWN buttons.

= Switch between digits with a short press of the M

button.

= Save selected date and exit the submenu with a

long press of the M button.

WiFi settings

Wi-Fi setup

This menu option allows you to set up your device

for operation in a Wi-Fi network. This menu option

allows you to set a password to access your thermal

imager from an external device.

A

SA

M

In automatic mode the need for calibration is

based on software algorithm. Calibration starts

automatically.

The user determines for himself the need for

calibration based on the actual image status.

Manual (silent) calibration.

Close the lens cover before calibration.

15

16

= Magnification – off (no digital zoom)

= Colour palette – White Hot

= Unit of measurement - metric

= PiP – off

= Wi-Fi – off (default password)

Warning: date and time settings, default pixel map

and remote control activation are saved.

Lens

selection

= Enter the submenu with a short press of the M

button.

Selection of the lens type is important for the correct

display of the optical magnification and adequate

operation of the Stadiametric rangefinder.

= Replace the objective lens: to do this, move the

latch (13) backwards, turn the lens counter-

clockwise all the way and remove the lens.

= Confirm selection with a long press of the M

button.

= Install a new lens, move the latch backwards and

move clockwise until the latch snaps.

Lens selection is used when replacing objective

lenses.

= With a short press of the UP/ DOWN buttons

select the desired lens: 28; 38 or 50.

= Enter the submenu with a short press of the M

button.

= Select icon with a short press of the M button.

= A marker (H) appears on the left side of the

display.

= On the right side of the display appears

“magnifying glass” (G) – a magnified image in a

frame with a fixed cross , designed for easier

detection of a defective pixel and to match the

pixel with the marker, horizontal and vertical

arrows for X and Y axes (I) showing marker's

movement.

+

The defective pixels on the sensor may proportionally increase in size

when digital zoom is activated. Helion 2 thermal imagers allow the user

to repair defective pixels on the detector using a software-based method

or to abort deletion.

G

H

I

x=95

y=99

Reset

Restore default settings

= Enter the Reset submenu with a short press of the

M (9) button.

= With a short press of the UP/ DOWN buttons

select “Yes” to restore default settings or “No” to

abort.

= Confirm selection with a short press of the M

button.

= If “Yes” is selected, display will show “Return

default settings?” and “Yes” and “No” options.

Select “Yes” to restore default settings.

= If “No” is selected, action is aborted and you

return to the submenu.

The following settings will be restored to their

original values before changes made by the user:

= Operating mode of video recorder – video

= Operating mode – Forest

= Calibration mode – automatic

= Language – English

Defective

pixel repair

Defective pixel repair

When operating a thermal imager, defective (dead)

pixels (bright or dark dots with constant brightness)

may become visible on the sensor.

= Hold down the M (9) button to enter the main

menu.

= Press briefly the M button the enter the submenu.

= With the microphone on, you will have audio track

in your video. Microphone is off by default.

= Turn the microphone on/off with a short press of

the M button.

= Select submenu with UP (10) and DOWN (8)

buttons.

Microphone

Oﬀ

Remote

Control

Before operating the remote control (RC),

remember to activate it as follows:

Remote control (bought separately)

= Press the M button, countdown starts (30 sec),

within which hold down for two seconds any RC

button.

= If activation is successful, the message

«Connection complete» appears .

= If error occurs the message «Connection failed»

appears . Repeat the procedure.

= The RC is activated and ready for use.

= To unlink the RC, press the М button, wait for the

countdown to expire without pressing any RC

button for 30 sec.

= All remote controls previously linked to your sight

are now unlinked.

= Full name

= serial number

This option allows the user to view the following

information about the device:

= SKU number

= firmware version

= service information

= hardware version

STATUS BAR

The status bar is located in the lower part of the display and shows

information on the actual operating status of the device, including:

13

VIDEO RECORDING AND PHOTOGRAPHY

Helion 2 thermal imagers feature video recording and photography of

the image being ranged to the internal memory card.

Before using this feature please read the menu options “Date setup”,

“Time setup” of the section “Main menu functions”.

14

Select menu option Device information with a short

press of the M button to review information.

The built-in recorder operates in two modes - VIDEO and PHOTO

18

17

(1) Colour palette

(shown only if the “Black Hot” palette is selected)

(2) Operating mode

(in the automatic calibration mode, three seconds before automatic

calibration a countdown timer 00:01 is shown in place of the calibration

mode icon).

(5) Wi-Fi connection status

External battery power indicator (if the device is powered by an

external power supply)

(7) Battery charge level (if the device is powered by the Battery Pack) or

(3) Calibration mode

(6) Running time

(4) Current full magnification (for example, 16x)

VIDEO mode. Video recording

The device in the VIDEO mode upon turning on.

In the top left corner you will see icon and remaining recording

time 5:12.in the format HH:MM (hours: minutes)

Upon start of video recording icon disappears, and icon REC and

recording timer in the format MM:SS (minutes : seconds) appear

instead:

Switch between modes (Video-> Photo-> Video) with a long press of

the REC button.

Video files are saved to the memory card after stopping video.

Pause and resume recording video with a short press of the REC

button.

Start video recording with a short press of the REC (7) button.

Stop recording video with a long press of the REC button.

REC 00:25

Return to default defective pixel pattern

This option allows you to cancel deletion of the

defective pixels and return them to the original

state.

= Enter the submenu with a short press of the M

button.

= Select icon and press М.

= Select “Yes” if you wish to return to default

defective pixel pattern, or “No” if you do not.

= Confirm selection with a short press of the M

button.

Device

information

= Switch the direction of the marker from horizontal

to vertical and vice versa with a short press of the

M button.

= Align the defective pixel with the fixed cross in the

frame – the pixel should disappear.

= Delete the defective pixel with a short press of the

REC (7) button.

= A brief message “OK” appears in the frame in

case of success.

= Then you can delete another defective pixel by

moving the marker along the display.

= Exit “Defective pixel repair” option with a long

press of the M button.

= With a short press of the UP/ DOWN buttons

move the marker to align it with a defective pixel.

Attention! The display of a thermal imager may have 1-

2 pixels represented as bright white or color (blue, red)

dots which cannot be deleted and are not a defect.

16x

12:30AM

A

1 2 3 4 6 75

WI-FI FUNCTION

Your thermal imager features wireless connection option (Wi-Fi) which

links it with external appliances (smartphone, tablet PC).

15

Activate the Wi-Fi module in the main menu. Activate the menu by

long pressing the M button (9). Wi-Fi operation is shown in the status

bar as follows:

Connection status

Status bar indication

Wi-Fi is off

Wi-Fi in the device is being

activated

Wi-Fi is on, device connected

Wi-Fi activated by the user,

Wi-Fi is on, no connection with

device

Your device is detected by an external device as Helion_XXXX»,

where XXXX – is the last four digits of device's serial number».

After a password is generated on an external appliance (please refer

to the menu option “Wi-Fi setup” of the section “Main menu

functions” of this user manual) and connection is established, the

icon in the status bar changes to .

Select the “Stadiametric rangefinder” function with a short press of

the M (9) and select the icon by briefly pressing M button.

You will see on the display: measurement bars, icons of three

reference objects and respective distances for the three objects.

STADIAMETRIC RANGEFINDER

16

Thermal imagers are equipped with a stadiametric rangefinder which

allows the user to estimate approximate distance to an object of known

size.

There are three pre-set reference

objects:

- Hare – height 0.3 m

- Wild boar – height 0.7 m

- Deer – height 1.7 m

160m

66m

28m

icon

20

19

- counter for multimedia files cannot be reset;

- Maximum duration of a recorded file is seven minutes. After

this time expires a video is recorded into a new file. The number

of recorded files is limited by the capacity of unit's internal

memory.

- you can enter and operate the menu during video recording;

- recorded videos and photos are saved to the built-in memory card in

the format img_xxx.jpg (photos); video_xxx.avi (videos). xxx –

three-digit counter for videos and photos;

Notes:

Attention!

- regularly check the free capacity of the internal memory, move

recorded footage to other storage media to free up space on the

internal memory card.

Photo mode. Photography

Switch to the Photo mode with a long press of the button. REC

Take a picture with a short press of the REC button. The image

freezes for 0.5 sec and a photo is saved to the internal memory.

in the top left corner of the display you can see: photography icon ,

“>100” means that you can take more than 100 pictures. If the number

of available pictures is less than 100, actual amount of available

pictures (for example 98) is shown next to the icon .

To playback video ﬁles recorded by thermal imaging devices on

macOS-based computers, we recommend that you use VLC video

player or Elmedia player.

Download links and QR codes are shown below:

IMPORTANT!

VLC Video Player ELMEDIA Video Player

The main image is shown with optical magnification ratio which

corresponds to ratio x1.0.

When is turned on, you can operate the continuous PiP step-up and

digital zoom. The full optical magnification will take place only in the

dedicated window.

When PiP is turned off, the image is shown with the optical

magnification set for the PiP function.

STREAM VISION

19

2. Connect your Pulsar device to your mobile device (smartphone or

tablet).

How to update instructions are as below:

4. Select your Pulsar device and press “Check Updates”.

Important:

Helion 2 thermal imagers support Stream Vision technology which

allows you to stream image from the display of your thermal imager to a

smartphone or tablet PC via Wi-Fi in real time mode. You can find further

guidelines on Stream Vision online at www.pulsar-vision.com

1. Download free of charge Stream Vision App on Google Play or App

Store. Scan the QR codes to download Stream Vision free of charge:

Note: the Stream Vision application allows you to update the firmware

features of your thermal imager.

- if your Pulsar device is connected to phone, please turn on mobile data

(GPRS/3G/4G) on your phone to download update;

- if your Pulsar device is not connected to your phone but it’s already in

the “My Devices” section, you may use Wi-Fi to download update.

5. Wait for the update to download and install. Pulsar device will reboot

and will be ready to operate.

3. Launch Stream Vision and go to section “My Devices”.

USB CONNECTION

20

Connect one end of the USB cable to the Micro-USB (4) port of your

device, and the other end to the USB port of your PC/laptop.

Turn the device on with a short press of the ON (11) button (device

that has been turned off cannot be detected by your computer).

Your device will be detected by the computer automatically; no drivers

need to be installed.

Two connection modes will appear

on the display:

Memory card (external memory)

and Power.

Select connection mode with UP

and DOWN buttons.

Confirm selection with a short press of the M button.

USB connection

Use as power

Use as memory card

22

21

To select the unit of measurement (metres or yards), go to the

respective menu option.

Move the lower fixed bar under the object being ranged and, while

pressing the UP/ DOWN buttons, move the upper horizontal bar

relative to the lower fixed bar until the object fits entirely between the

two cursors. The distance to the object is automatically recalculated

as you move the upper line.

If ranging does not take place within 10 seconds, the information

disappears from the display.

Before it appears on the display, a measured distance value is

rounded up to 5 m for larger values, and rounded down to 1 m for

smaller values.

Exit rangefinder mode with a long press of the M button or wait 10

seconds to exit automatically.

FUNCTION DISPLAY OFF

The Display off function deactivates transmission of image to the display

by minimizing its brightness. This prevents accidental disclosure.

The device keeps running.

17

When holding down the ON button, the display shows

“Display off” message with countdown, the device will turn off.

To activate the display, press briefly the ON button.

When the device is on, hold down the ON (11) button. Display goes

out, message “Display off”.

6.9x

3.1x

FUNCTION PiP

18

PiP (“Picture in Picture”) allows you to see

a zoomed image simultaneously with the

main image in a dedicated window.

Turn on/off the PiP function with a long press of the DOWN (8) button.

Change zoom ratio in the PiP window with a short press of the DOWN

button.

The zoomed image is displayed in a dedicated window, with the full

optical magnification being shown.

TECHNICAL INSPECTION

22

Check:

External view (there should be no cracks on the housing).

The state of the Battery Pack (should be charged) and electric

terminals (there should be no oxidation).

Correct functioning of the controls.

The state of the objective and eyepiece lenses (there should be no

cracks, spot, dust, deposits etc. ).

TROUBLESHOOTING

24

The table presented below lists some potential problems that may occur

when using the device. If a problem encountered with the device is not

listed, or if the recommended action does not resolve the problem, the

unit should be returned for repair.

23

MAINTENANCE AND STORAGE

Maintenance should be carried out no less frequently than twice a

year, and should consist of the following measures:

Clean the electric terminals of the Battery Pack and device's

battery slot using a grease-free organic solvent.

Store the device in a carrying case. Remove the Battery Pack

Wipe external plastic and metal surfaces clean of dust and dirt with

a soft cloth moistened with a synthetic cleaning agent.

Check the objective and eyepiece lenses. If required, remove dust

and sand (preferably by a noncontact method). Clean the external

surfaces of the lenses with products expressly designed for this

purpose.

for long-term storage.

The thermal imager

will not turn on.

operate on external

The unit does not

power supply.

Battery Pack is discharged.

USB cable is damaged.

Charge the battery.

Replace USB cable.

Check

Corrective action

Problem

External power supply is

discharged.

Charge the external power

supply (if necessary).

23

24

Connection modes:

Memory card (external memory). In this mode the device is

detected by the computer as a flash card. This mode is designed for

work with the files saved in device's memory. The device's functions

are not available in this mode; the device turns off automatically.

- If video recording was in progress when connection was made,

recording stops and video is saved.

In this mode PC/laptop is used as an external power supply. The

status bar shows icon . The device continues operating and all

functions are available.

Note: The Battery pack installed in the device is not being charged!

When USB is disconnected from the device where connection is in

the USB Mass storage device mode, the device remains on the OFF

state. Turn the device ON for further operation.

Power.

When USB is disconnected from the device when in the Power mode,

the device keeps operating with Battery Pack, if available, and it has

sufficient charge.

WIRELESS REMOTE CONTROL

(bought separately)

21

Wireless remote control (RC) duplicates the POWER ON function, digital

zoom, video start/stop and menu navigation.

RC controls are as follows:

Button (16): digital zoom activation. Function PiP.

ON Button (15): duplicates the functions of the ON (11) button.

Button (17): duplicates the functions of the REC (7) button.

Controller (18): duplicates the functions of

the М (9) button when pressed; duplicates

the functions of the UP (10)/ DOWN (8)

upon rotation (in quick menu/main menu).

15

16

17

18

background.

The image is blurry,

with vertical stripes

and uneven

The image is too

dark.

Poor image quality /

Detection range

reduced.

Calibration is required.

is too low.

Brightness or contrast level

Problems described may arise in adverse weather conditions

(snow, rain, fog etc.).

Carry out calibration according

to Section

“SENSOR CALIBRATION”.

Adjust brightness/contrast with

the UP/DOWN buttons.

Smartphone or tablet

PC cannot be

connected to the

device.

Password in the unit was

changed.

Delete network and connect

again inserting the password

saved in the device.

Smartphone or tablet

PC cannot be

connected to the

device.

Password in the unit was

changed.

Delete network and connect

again inserting the password

saved in the device.

No Wi-Fi signal or

erratic signal.

The unit is beyond reliable

There are obstacles between

the device and the signal

receiver (i.e. concrete walls).

Wi-Fi range.

Place the device in line-of-sight

of the Wi-Fi signal.

There are too many Wi-Fi

networks in the area where the

scope is located which may

cause signal interference.

To ensure stable Wi-Fi

performance, move the

riflescope to an area with few

or no Wi-Fi networks.

with wireless remote

control.

The device cannot

be powered on

Remote control is not

activated.

Low battery.

Activate the remote control

according to instructions.

Install a new CR2032 battery.

When using the

scope at below zero

temperatures the

image quality is

worse than at

positive

temperatures.

At low operating temperatures, objects under observation

(background) normally cool down to roughly identical

temperatures, which leads to lower temperature contrast, and to

image quality (precision) degradation. This is normal for thermal

imaging device.

Because of variations in thermal conductivity, objects (surrounding

environment, background) under observation become warm more

quickly at above-zero temperatures, which allows higher

temperature contrast and, thus, the quality of the image produced

by a thermal imager will be better.

Check

Corrective action

Problem

26

25

Color stripes appear

on the display or

images disappears.

The device has accumulated

static charge during

operation.

As soon as the impact of the

static charge is over, the device

may reboot automatically;

alternatively please turn off and

restart the device.

The term of possible repair of the device is ﬁve years.

SPÉCIFICATIONS

28

27

MODÈLE

HELION 2 XP50

SKU

77402

MICRO-BOLOMÈTRE

Type

Non refroidi

Résolution, pixels

640х480

Fréquence de rafraîchissement des images, Hz

50

Taille de pixel, micron

17

CARACTÉRISTIQUES OPTIQUES

Amplification optique (zoom) x

2,5

Zoom numérique lisse, coefficient

2,5 - 20

Zoom numérique

x2/ x4/ x8

Objectif, mm

F50 mm,F/1,2

Angle de champ visuel (horizon), deg

12,4

Gamme de mise au point d'oculaire, dioptrie

±5

Distance de détection, m (objet - animal de

type «cerf»)

1800

L’ÉCRAN

Type

AMOLED

Résolution, pixels

640х480

CARACTÉRISTIQUES DE FONCTIONNEMENT

Alimentation électrique, V

3 - 4,2

Type de batterie / capacité / tension de sortie

nominale

Li-ion Battery Pack IPS7/

6400 mAh/ DC 3,7 V

Alimentation externe

5 V (USB)

Autonomie de la batterie (à t = 22 ° C)*, h

10

Degré de protection, code IP (IEC60529), avec

une batterie installée

IPX7

Plage de température de fonctionnement, °C

-25…+50

Dimensions, mm

234х55х58

Poids (sans batterie), kg

0,5

ENREGISTREUR VIDÉO

Résolution vidéo/ photo, pixels

640х480

Format vidéo/ photo

.avi / .jpg

Quantité de mémoire intégrée

16 GB

Capacité de mémoire intégrée

Environ 8 heures de vidéo

ou plus de 100 000 photos

CHAÎNE WI-FI

Fréquence

2,4 GHz

Standard

802.11 b/g

Distance de reception en ligne de visée directe, m

15



* L’autonomie réelle de la batterie varie selon l’utilisation du Wi-Fi et de

l’enregistreur vidéo intégré.

La configuration peut être modifiée afin d’améliorer l’utilisation d’un appareil.

Enregistreur vidéo/son incorporé

YouTube. Streaming (diffusion continue) vidéo directe et

enregistrement sur smartphone en utilisant l'application Stream

Vision

Wi-Fi. Télécommande et affichage en utilisant un smartphone

Intégration avec les téléphones mobiles macOS et androïde

ENREGISTREUR VIDÉO

Blocs batteries Li-Ion se détachant rapidement IPS7/IPS14

Recharge des batteries IPS7/IPS14 via USB

Autonomie en mode Wi-Fi jusqu'à 20 heures*

Fonctionnement sur batteries АА**

BLOC BATTERIE

VUE EXTÉRIEURE ET COMMANDES

Lunette d'imagerie thermique

Helion 2

Bloc batterie IPS7

Chargeur de batterie avec

chargeur alimentation secteur

Câble USB

CONTENUS DE L'EMBALLAGE

La dernière édition de ce manuel d'utilisation est disponible sur www.pulsar-vision.com

Ce produit peut être modifié en fonction des améliorations apportées à sa conception.

Mallette de transport

Dragonne

Guide de démarrage rapide

Chiffon pour objectif

Carte de garantie

Les lunettes d'imagerie thermique HELION 2 ne nécessitent pas une

source de lumière extérieure et ne sont pas affectées par l'exposition à

une lumière brillante.

Les lunettes d'imagerie thermique HELION 2 sont conçues pour divers

domaines d'applications comprenant la chasse de nuit, l'observation,

l'orientation précise, les opérations de sauvetage, etc.

Les lunettes d'imagerie thermique HELION 2 sont basées sur un capteur

IR (microbolomètre non refroidi) et conçues pour être utilisées la nuit ou

le jour par conditions météo défavorables (brouillard, smog, pluie) pour

voir à travers les obstacles masquant les cibles (branches, herbes

hautes, broussailles épaisses, etc.).

DESCRIPTION

Interface facile à utiliser

Trois modes de calibration: manuel, semi-automatique, automatique

Quatre modes de fonctionnement: Forêt, Montagnes, Identification,

Utilization

Huit palettes de couleurs pour l'observation

Télémètre stadiamétrique

Option extinction affichage

Fonction de réparation des pixels défectueux

Conception fonctionnelle et ergonomique

Fonction «Image Detail Boost»

Caractéristiques modifiables

Large gamme de températures de fonctionnement (-25 °С …+50 °С)

CARACTÉRISTIQUES

2

3

* sur bloc batterie IPS14 (vendu séparément).

** avec conteneur de batterie (vendu séparément).

5

6

7

8

9

10

11

1

2

3

4

Bouton marche/arrêt ON

Bloc batterie

Bague de mise au point d'objectif

Visière

Bouton navigation UP

Couvercle de lentille

Système de refroidissement de radiateur

Bouton MENU

Bouton navigation DOWN

Port micro-USB

Bague de réglage de dioptre

Bouton enregistrement REC

Levier pour bloc batterie

Verrou pour changement de lentille

12

13

14

4

29

30

L'appareil est

éteint

AUTRES APPUIS COURTS

APPUI LONG

Éteignez l'affichage/

coupez l'alimentation

UTILISATION DU BLOC BATTERIE

Les lunettes d'imagerie thermique Helion 2 sont livrées avec un bloc

batterie Li-Ion rechargeable IPS7 ayant une autonomie maximum de 10

heures. N'oubliez pas de charger le bloc batterie avant la première

utilisation.

DESCRIPTION DES COMMANDES

(MODE OPÉRATOIRE

ACTUEL

6

5

PREMIER APPUI

COURT

Alimentation

branchée

Calibrez le capteur

Mode affichage

OFF (éteint)

Allumez

l'affichage.

Calibrez le capteur

L'appareil est

allumé.

Calibrez le capteur

Régulier

(observation)

Palettes de couleur

Menu principal

Navigation vers le haut/vers la droite

Menu rapide

Modes opératoires

Modifications des paramètres

Régulier

(observation)

Menu principal

Menu rapide

Lancez le

menu rapide

Lancez le menu

principal.

Confirmez la sélection.

Commutez entre les options du

menu rapide.

Quittez le sous-menu

sans confirmer la

sélection /

Quittez le menu

(passez en mode

visualisation)

Régulier

(observation)

Menu principal

Menu rapide

Réglez le zoom numérique discret

Marche/arrêt PiP

Navigation vers le bas/vers la gauche

Modifications des paramètres

Mode vidéo

Démarrer

l'enregistrement

vidéo

Pause / reprendre

l'enregistrement vidéo

Arrêter

l'enregistrement

vidéo /

Passer en mode photo

Mode photo

Prendre une photo.

Passer en mode vidéo.

Charge:

BOUTON

6

31

32

----

Soulevez le levier (C) du chargeur.

- trois fois si la charge de la batterie est comprise entre 76 % et 100 %.

Au moment de l'installation, un voyant LED vert (D) sur le chargeur

s'allumera et commencera à clignoter:

Raccordez la prise micro-USB du câble USB au port (E) du chargeur.

Installez le bloc batterie dans le chargeur comme montré dans l'image

(Pic.2); encliquetez le levier (C).

Enlevez le couvercle de protection sur le bloc batterie.

- une fois si la charge de la batterie est comprise entre 0 % et 50 %.

- deux fois si la charge de la batterie est comprise entre 51 % et 75 %.

Si le voyant s'allume en vert en fixe, la batterie est chargée au

maximum. Vous pouvez séparer la batterie du chargeur en soulevant

le levier (C).

Si l'indicateur du chargeur s'allume en rouge en continu lors de

l'installation de la batterie, le niveau de charge de la batterie est

probablement inférieur à l'acceptable (la batterie a été longtemps en

décharge profonde). Conservez la batterie dans le chargeur

pendant une longue période (jusqu'à plusieurs heures), enlevez et

réinsérez-la.

Si l'indicateur commence à clignoter en vert, la batterie est bonne; si

elle continue à s'allumer en rouge, elle est défectueuse. N'utilisez

pas la batterie!

Raccordez la prise micro-USB au chargeur.

Insérez la fiche mâle du chargeur dans la prise femelle 110-240 V.

C

D

E

L'embase de

chargement

Bloc-batterie

Chargeur

Prise 110-240V

Fig. 3

ON (11)

UP (10)

MENU

(9)

DOWN

(8)

REC

(7)

M

Enlevez le couvercle de protection sur le bloc batterie.

Fixez la batterie en encliquetant le levier.

Soulevez le levier (13).

Installez la batterie dans la fente spéciale sur le boîtier de l'appareil

afin que l'élément F (Fig. 2 sur la page de garde) apparaisse par en

dessous.

INSTALLATION:

Utilisez uniquement le chargeur fourni avec le bloc batterie.

L'utilisation d'un autre chargeur peut endommager définitivement le

bloc batterie ou le chargeur et peut provoquer un incendie.

Ne laissez pas une batterie sans surveillance pendant sa charge.

Ne chargez pas immédiatement la batterie après l'avoir

amenée depuis un environnement froid vers un

environnement chaud. Attendez 30-40 minutes pour que la

batterie se réchauffe.

N'utilisez jamais un chargeur modifié ou endommagé.

Lorsque la batterie est stockée pendant une longue période,

elle ne doit pas être complètement chargée ou complètement

déchargée.

Sinon la durée de vie de la batterie diminuera considérablement.

N'exposez pas le bloc batterie à des températures élevées ou à

une flamme nue. N'immergez pas dans l'eau la batterie.

Chargez le bloc batterie à une température entre 0 °C et +45 °C.

Ne connectez pas un appareil extérieur soutirant une intensité

supérieure à l'intensité maximum autorisée.

Le bloc batterie est protégé contre les court-circuits. Cependant, il

faut éviter les situations pouvant provoquer un court-circuit.

Ne démontez pas et ne déformez pas le bloc batterie.

Ne laissez pas le bloc batterie avec un chargeur connecté à

l'alimentation secteur pendant plus de 24 heures après une

recharge complète.

Ne laissez pas tomber ou ne heurtez pas la batterie.

Lorsque vous utilisez la batterie avec des températures négatives,

sa capacité diminue, ceci est normal et n'est pas un défaut.

N'utilisez pas la batterie à des températures supérieures à celles

indiquées dans le tableau – ceci pourrait diminuer la durée de vie

de la batterie.

Conservez la batterie hors de portée des enfants.

MESURES DE SÉCURITÉ:

ALIMENTATION EXTÉRIEURE

7

L'appareil peut être alimenté par une alimentation extérieure comme un

chargeur Power Bank (5 V).

Lorsque l'alimentation extérieure est déconnectée, l'appareil passe

sur le bloc batterie interne sans s'éteindre.

Si l'appareil fonctionne sur une alimentation extérieure, mais si la

batterie IPS7 n'est pas connectée, l'icône est affichée.

Attention! Chargement des batteries IPS7/IPS14 à des

températures de l'air inférieures à 0 °C peut réduire la durée de vie

des batteries. Lorsque vous utilisez une alimentation externe,

connectez la Power Bank doit être connectée à l'appareil allumé, qui

a fonctionné pendant plusieurs minutes.

L'appareil se commute alors sur l'alimentation extérieure, et le bloc

batterie IPS7 commencera à se charger lentement.

L'écran affichera l'icône batterie indiquant le niveau de charge

en pourcentage.

UTILISATION

AVERTISSEMENT! Le système de refroidissement du radiateur (14)

devient chaud pendant le fonctionnement: ceci est normal et

permet d'augmenter la sensibilité de la lunette.

Mise sous tension et configuration d'image

AVERTISSEMENT! Ne pointez pas l'objectif de la lunette sur une

source lumineuse intense comme un appareil émettant des rayons

lasers ou sur le soleil. Ceci peut rendre les composants

électroniques inopérants. La garantie ne couvre pas les dommages

causés par une utilisation incorrecte.

8

Allumez la lunette en appuyant rapidement sur le bouton ON (11).

Pour mettre au point sur l'objet observé, faites tourner la bague de

mise au point (2).

Pour régler la luminosité et le contraste de l'affichage et pour un zoom

continu, consultez la section FONCTIONS DU MENU RAPIDE.

Ouvrez le couvercle de lentille (1).

Après utilisation, maintenez enfoncé le bouton ON (11) pour éteindre

la lunette.

Pour obtenir une image bien contrastée des icônes sur l'affichage,

faites tourner la bague de réglage de dioptre (6). Ensuite, il n'est pas

nécessaire de faire tourner la bague de réglage de dioptre pour la

distance ou d'autres conditions.

CALIBRATION DU CAPTEUR

9

La calibration permet de mettre à niveau la température de fond du

microbolomètre et elle élimine les défauts d'image (par exemple image

figée, rayures verticales, etc.).

Sélectionnez le mode voulu dans l'option du menu «CALIBRATION ».

Il y a trois modes de calibration : manuel (M), semi-automatique (SA) et

automatique (A).

Raccordez l'alimentation extérieure au port USB (4) de l'appareil

(Fig.1).

34

Mode М (manuel) Fermez le couvercle de lentille, allumez la lunette

en appuyant rapidement sur le bouton ON (11). À la fin de la

calibration, ouvrez le couvercle de lentille.

Mode SA (semi-automatique) La calibration est activée en

appuyant rapidement sur le bouton ON. Vous n'avez pas à fermer le

couvercle de lentille (le capteur est fermé automatiquement avec

l'obturateur interne).

Mode А (automatique) La lunette se calibre elle-même en utilisant

l'algorithme logiciel. Vous n'avez pas à fermer le couvercle de lentille

(le capteur est fermé automatiquement avec l'obturateur interne). La

calibration assistée par l'utilisateur est possible à l'aide du bouton ON

dans ce mode (en mode semi-automatique).

La valeur initiale du zoom numérique continu est x1,0 si le zoom

numérique discret n'est pas actif.

Pour basculer entre les fonctions ci-dessous, appuyez plusieurs fois

sur le bouton M.

Contraste – appuyez sur les boutons UP/ DOWN pour faire varier

le contraste de l'affichage de 0 à 20.

Lancez le menu en appuyant rapidement sur le bouton М (9).

Luminosité – appuyez sur les boutons UP (10)/ DOWN (8) pour

faire varier la luminosité de 0 à 20.

Zoom numérique – appuyez sur les boutons UP/ DOWN pour

faire varier le zoom de 2,5x à 20x. Le zoom numérique continu peut

varier par pas de 0,1x.

Télémètre stadiamétrique – appuyez sur les boutons UP/ DOWN

modifiez la distance entre les réticules spéciaux pour déterminer la

distance à l'objet observé.

ZOOM NUMÉRIQUE DISCRET

10

La lunette vous permet d'augmenter rapidement le grossissement de

base (voir la ligne « Zoom numérique » dans le tableau de spécifications)

en le multipliant par deux ou par quatre et par 8 dans, et vous permet de

revenir au grossissement de base. Pour faire fonctionner le zoom

numérique discret, appuyez successivement sur le bouton DOWN (8).

FONCTIONS DE MENU RAPIDE

11

Le menu rapide vous permet de modifier les réglages de base

(luminosité et contraste de l'affichage, zoom numérique continu et

télémètre stadiamétrique).

Appuyez sur les boutons UP (10)/ DOWN (8) pour commuter entre

les options du menu.

Quittez le menu par un appui long sur le bouton М.

Lancez une option du menu par un appui court sur le bouton М.

La sortie a lieu automatiquement après 10 s d'inactivité.

Lancez le menu par un appui long sur le bouton М (9).

La navigation du menu cyclique: dès que la dernière option du menu

correspondant au premier onglet est atteinte, la première option du

menu du second onglet démarre.

À la sortie du menu, l'emplacement du curseur n'est mémorisé que

pendant la durée de la séance de travail (c-à-d jusqu'à ce que la

lunette soit éteinte). Au redémarrage de la lunette et au lancement du

menu, le curseur se placera sur la première option du menu.

FONCTIONS DU MENU PRINCIPAL

12

ONGLET 1

CONTENUS DU MENU:

ONGLET 2

36

35

Wi-Fi activation

General settingsMenuMenu

Black Hot

10

Notes. Les réglages luminosité et contraste de l'affichage sont

sauvegardés dans la mémoire lorsque la lunette est éteinte.

Mode de base – vous permet de sélectionner l'un des

trois modes comme base pour le mode d'utilisation.

Quittez le menu rapide en appuyant longuement sur le bouton M ou

at te nd ez 10 se condes pour que ce mode so it quitté

automatiquement.

La pagina sta caricando ...

Pulsar Nightvision Helion 2 XP Manuale del proprietario

Questo manuale è adatto anche per

Pulsar Nightvision Helion 2 XP Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti