Pulsar Nightvision PULSAR Wärmebildgerät Binokular Accolade 2 LRF XP50 mit eingebautem Entfernungsmesser Manuale del proprietario

Marca: Pulsar Nightvision

Modello: PULSAR Wärmebildgerät Binokular Accolade 2 LRF XP50 mit eingebautem Entfernungsmesser

Tipo: Manuale del proprietario

Thermal Imaging

Binoculars

ACCOLADE 2

LRF

Operating Instructions

English / Français / Deutsch / Español / Italiano / Русский

v.0320

Electromagnetic compliance

Warning! Operation of this equipment in a residential environment could cause radio

interference.

Attention! Accolade 2 LRF thermal imaging binoculars require a license if exported

outside your country.

For detailed information about the device, please download the complete user manual:

www.pulsar-vision.com/products/thermal-imaging-scopes

This product complies with EU Standard EN 55032:2015, Class A.

Pour des informations détaillées sur la lunette, prière de télécharger le manuel

complet d'utilisation: www.pulsar-vision.com/products/thermal-imaging-scopes

Elektromagnetische Verträglichkeit

Compatibilité électromagnétique

Das Produkt entspricht der Europäischen Norm EN 55032:2015, Klasse A.

Attention! Les jumelles d'imagerie thermique Accolade 2 LRF nécessitent une licence

s'ils sont exportés hors de votre pays.

Ce produit est conforme à la norme européenne EN 55032:2015, Classe A.

Achtung! Wärmebildferngläser Accolade 2 LRF benötigen eine Lizenz, wenn sie

außerhalb Ihres Landes exportiert werden.

Attention! L'utilisation de ce matériel dans un environnement résidentiel peut

produire des interférences radio.

Advertencia: el funcionamiento de este equipo en áreas residenciales podría causar

radio interferencias.

Para obtener información detallada acerca del dispositivo, descargue el manual de

usuario al completo: www.pulsar-vision.com/products/thermal-imaging-scopes

Compatibilidad electromagnética

Für detaillierte Informationen über das Gerät, bitte das vollständige Handbuch

herunterladen: www.pulsar-vision.com/products/thermal-imaging-scopes

¡Atención! Los binoculares de visión térmica Accolade 2 LRF requieren una licencia si

se exportan fuera de su país.

Warnung! Der Betrieb dieses Gerätes im Wohngebiet kann Funkstörungen verursachen.

Este producto cumple con la reglamentación de la UE EN 55032:2015, Clase A.

Compatibilità elettromagnetica

www.pulsar-vision.com/products/thermal-imaging-scopes

http://www.pulsar-vision.com/ru/products/thermal-imaging-scopes

Attenzione! I binocoli termici Accolade 2 LRF richiedono una licenza se esportati al di

fuori del proprio paese.

Электромагнитная совместимость.

Questo prodotto è conforme alla norma europea EN 55032:2015, Classe A.

Внимание: эксплуатация данного продукта в жилой зоне может создавать

радиопомехи.

Avvertenza: l'uso di questa apparecchiatura in un'area residenziale può causare

perturbazioni radioelettriche.

Для получения подробной информации о приборе скачайте полное руководство

по эксплуатации:

Per informazioni dettagliate sul dispositivo, scaricare il manuale d'uso completo:

Внимание! Тепловизионные бинокли Accolade 2 LRF требуют лицензии, если они

экспортируются за пределы Вашей страны.

Данный продукт соответствует требованиям европейского стандарта EN

55032:2015, Класс А.

РУССКИЙ

Thermal Imaging Binoculars Accolade 2 LRF

Jumelles Accolade 2 LRF d'imagerie thermique

W ferngl ser Accolade 2 LRFärmebild ä

Binoculares s Accolade 2 LRF térmico

Binoccoli termici Accolade 2 LRF

Тепловизионные бинокли Accolade 2 LRF

LRF Laser Aperture

Microbolometer:

MODEL Accolade 2 LRF

SKU#

Optical characteristics:

Operational characteristics:

-25 °С ... +50 °С / -13 °F ... 122 °F

164 х 130 х 64 / 6.46 х 5.12 х 2.52

XP50

77410

640x480

2.5

2.5-20

12.4 / 21.8

±5

1800 / 1970

AMOLED

640x480

IPХ7

1:1.2

x2/x4/x8

56-71

3.7V

Accolade 2 LRF thermal imaging binoculars are designed for various

areas of application including night hunting, observation, trail

orienteering, rescue operations etc.

Accolade 2 LRF thermal imaging binoculars are based on an IR sensor

(uncooled microbolometer). The binoculars feature comfortable

observation with both eyes.

The binoculars are designed for the use both in the night-time and during

the day in adverse weather conditions (fog, smog, rain) to see through

obstacles hindering detection of targets (branches, tallgrass, thick

bushes etc.). The binoculars do not require an external source of light

and are not affected by bright light exposure.

The binoculars are equipped with a precise built-in laser rangefinder

designed to measure distance up to 1000 m.

Quick-change long-life rechargeable Battery Packs

Built-in precise laser rangefinder (up to 1000 m)

Live internet video sharing

Fully waterproof IPX7

Comfortable for long observation

Wi-Fi video transmission

Frost resistant AMOLED display

Built-in video recorder

Built-in Wi-Fi module

High refresh rate 50 Hz

Variable interpupillary distance

Li-Ion Battery Pack IPS7 / 6400 mAh /

DC 3.7V (3.0-4.2)

300 min video or ˃20 000 pictures

16 Gb

2.4 GHz

Type

Resolution, pixels

Frame rate, Hz

Pixel size, µm

Magnification, x

Continuous digital zoom, x

Digital zoom

Objective lens

Close-up range, m

Exit pupil diameter, mm

Field of view (HxV), degrees / m@100m

Dioptre adjustment, D

Range of detection (deer type object), m (y)

Display:

Type

Resolution, pixels

Power supply

Battery type / Capacity /

Output voltage

External power supply

Operating time on Battery Pack (at t=22°C), h*

Degree of protection, IP code (IEC60529)

Operating temperature range

Dimensions, mm / inch

Weight (without battery), kg / oz

Video recorder

Video / photo resolution, pixel

Video / photo format

Built-in memory

Built-in memory capacity

Wi-Fi channel

Frequency

Standard

Line-of-sight reception range, m

uncooled

640x480

.avi / .jpg

Interpupillary distance adjustment, mm

PACKAGE CONTENTS

Accolade 2 LRF Thermal Imaging

Binoculars

Carrying case

IPS7 Battery Pack

Battery charger with mains

charger

Micro USB cable

Neck strap

Quick start guide

Lens cloth

Warranty card

The latest edition of this user manual is available online at www.pulsar-vision.com

This product is subject to change in line with improvements to its design.

DESCRIPTION

FEATURES

Major features:

0.6 / 21.2

802,11 b/g

Characteristics of the rangefinder

Max. measuring range, m/y**

Measurement accuracy, m

Wavelength, nm

905

1000 / 1094

+/-1

** Depends on the characteristics of the object under observation and environmental conditions.

* Actual operating time depends on the extent of using Wi-Fi, integrated video recorder and

integrated laser rangefinder.

Safety class for laser equipment

according to IEC 60825-1:2014

Color palettes

Observation modes

«Picture-in-Picture» mode

Manual contrast and brightness adjustment

Calibration modes

Radiator cooling system

Navigation button UP

Button MENU

Recording button REC

Power ON/OFF / Calibration button

Navigation button DOWN

Dioptre adjustment rings

Lens focusing ring

Battery Pack

Tripod mount

Lens cover

Objective lens

Battery Pack latch

MicroUSB cable

Interpupillary distance adjustment rings

MicroUSB port

Integrated laser rangefinder

Extra features:

EXTERNAL VIEW AND CONTROLS

Pic. 1

FUNCTIONS OF CONTROL BUTTONS

Device is off

OTHER SHORT

PRESSES

LONG PRESS

Turn display off/

Power device off

CURRENT

OPERATING MODE

FIRST SHORT

PRESS

Power device on

Calibrate the sensor

Display OFF

mode

Turn display on

Calibrate the sensor

Device is on

Calibrate the sensor

Regular

navigation

Navigation upwards/rightwards

Switch between

colour palettes

Regular

navigation

Enter quick menu

Switch between

quick menu options

Confirm selection

Enter main menu

Control incremental digital zoom

Operating Modes

Navigation downwards/leftwards

Video

Start video

recording

Pause / resume

video recording

Stop video recording /

Switch to photo mode

Photo Take a photograph

Switch to video mode

BUTTON

ON/OFF

(1)

UP (2)

MENU (3)

DOWN

(5)

REC (4)

Rangefinder

----

Activate rangefinder

Measure distance

Start/stop

SCAN mode

----

Accolade 2 LRF thermal imaging binoculars are supplied with a

rechargeable Li-Ion Battery Pack IPS7 which allows operation for up to

9 hours. Please remember to charge the Battery Pack before first use.

Charging:

USING THE BATTERY PACK

Lift the lever (C) of the charging base.

Install the Battery Pack into the charging base as shown in Pic.2;

click the lever (C).

- once if the battery charge ranges from 0% to 50%;

- three times if the battery charge ranges from 76% to 100%;

If the indicator of the charger lights red continuously upon battery

installation, probably the battery's charge level is lower than

acceptable (the battery has been long in deep discharge).

Do not use the battery!

- twice if the battery charge ranges from 51% to 75%;

Keep the battery in the charger for a long time (up to several hours),

remove and re-insert it. If the indicator starts blinking green, the

battery is good; if it keeps lighting red it's defective.

Upon installation, a green LED indicator (D) on the charging base

will start to glow and begin flashing:

If the indicator lights green continuously, the battery is fully charged.

You can remove the battery from the charger by lifting the lever (10).

Remove the protective cover from the Battery Pack.

Connect the Micro-USB plug of the USB cable to the port (E) of the

charger.

Insert the plug of the charger to the 220 V socket.

Connect the Micro-USB plug to the charger.

Lift the lever (10).

Install the battery (9) all the

way into the dedicated slot on

the device housing so that

element F appears from below

(Pic.3) .

Fix the battery by clicking the

lever.

Installing the Battery Pack:

Only use the charger supplied with your binoculars.

Do not charge the battery immediately after bringing the

battery from cold environment to a warm one. Wait for 30 - 40

minutes for the battery to get warm.

Otherwise batter's life will decrease significantly.

Charge the Battery Pack at a temperature from 0 °C to +45 °C.

Do not leave a battery unattended while charging.

When keeping the battery for a long period, the battery should

not be fully charged or fully discharged.

Do not leave the Battery Pack with a charger connected to the

mains longer than 24 hours after full charge.

Never use a modified or damaged charger.

Safety measures:

Charging

base

Battery Pack

Charger

220V socket

109

Pic. 3

Pic. 2

The device can be powered with an external power supply such as

Power Bank (5 V).

Connect the external power supply to the USB port (15) of the device

(Pic. 1).

The device switches to operation from external power supply, and the

IPS7 Battery Pack will begin slowly charging.

The display will show the battery icon with charge level as a

percentage.

If the device operates on external power supply but the IPS7 battery is

not connected, icon is shown.

When the external power supply is disconnected, the device switches

to the internal battery pack without powering off.

Attention! Charging IPS7/IPS14 batteries at air temperatures below

0 °C can result in reduced battery life. When using external power,

connect Power Bank to the switched-on riflescope, which have

worked for several minutes.

Do not dismantle or deform the Battery Pack.

Do not use the battery at the temperatures above those shown in

the table – this may decrease battery's life.

Do not submerge the battery in water.

Do not connect external device with a current consumption that

exceeds permitted levels.

Do not expose the battery pack to high temperature or to a naked

flame.

The Battery Pack is short circuit protected. However, any situation

that may cause short-circuiting should be avoided.

Do not drop or hit the battery.

When using the battery at negative temperatures, battery's capacity

decreases, this is normal and is not a defect.

Keep the battery out of the reach of children.

EXTERNAL POWER SUPPLY

Do not point the objective lens of the device at intensive sources

of light such device emitting laser radiation or the sun. This may

render the electronic components inoperative. The warranty does

not cover damage caused by improper operation.

WARNING!

OPERATION

Powering on and image setup

Adjust the interpupillary distance with the rings (6) by moving the

eyepieces farther or closer to each other.

Open the lens cover .(13)

T device ON/OFF (1) urn the on with a short press of the button.

To obtain a crisp image of the icons on the display, rotate the dioptre

adjustment ring . there is no need to rotate the s (7) Once adjusted,

dioptre adjustment ring for distance or any other conditions.

To focus on the object being observed rotate the lens focusing

ring .(8)

A press and ON/OFF fter use, hold down the button to turn the

device off.

To set up display brightness and contrast and continuous zoom,

please refer to the MENU FUNCTIONS section. QUICK

Calibration allows levelling of the background temperature of the

microbolometer and eliminates image flaws (such as frozen image,

vertical stripes etc.).

There are three calibration modes:

manual (M), semi-automatic (SA) and automatic (А).

SENSOR CALIBRATION

Mode М (manual)

Mode SA (semi-automatic)

- Open the lens cover.

- Close the lens cover, press briefly the ON/OFF (1) button.

You do not need to close the lens cover (the sensor is closed with

the internal shutter automatically).

- The device calibrates by itself according to the software

algorithm.

- Press briefly the ON/OFF button to calibrate.

- You do not need to close the lens cover (the sensor is closed with

the internal shutter automatically).

- In the automatic mode the user can calibrate the sensor with the

ON/OFF (in the SA mode) button.

Mode А (automatic)

The digital zoom will not be saved after the device is re-started.

The device allows you to quickly increase the basic magnification

(please refer to the line in the specifications table) by 2, «Digital zoom»

4 or 8 times.

To operate the discrete digital zoom, press successively the DOWN (5)

button.

QUICK MENU FUNCTIONS

Enter the menu with a short press of the М (3) button.

To toggle between the functions below, press successively the M

button.

Select the desired mode in the menu option «CALIBRATION»

INCREMENTAL DIGITAL ZOOM

The Quick menu allows change of basic settings such as display

brightness and contrast, smooth digital zoom.

Contrast – press briefly the UP(2)/ DOWN(5) buttons to change

display contrast from 00 to 20.

Brightness – press briefly the UP(2)/ DOWN(5) buttons to

change display brightness from 00 to 20.

The radiator cooling system (12) becomes warm during

operation: this is normal and allows an increase in the sensitivity

of the device.

WARNING!

The “Image Detail boost” function increases the sharpness of the

contours of heated objects, which increases their detail. The result of the

function depends on the selected mode and observation conditions: the

higher the contrast of objects, the more noticeable the effect. This option

is enabled by default, but can be disabled in the main menu.

IMAGE DETAIL BOOST

Smooth digital zoom DOWN– press the UP(2)/ (5) buttons to

change digital zoom from 2,5 to 20.

Basic mode – it allows you to select one of the three modes

as the basic one for the user mode.

Smooth digital zoom is in 0.1x increments.

- actual magnification is the product of the basic magnification value

and continuous digital zoom value.

For example: the device's basic magnification is 3. , smooth digital 1х

zoom value 1.7. Actual magnification is 5. (3. *1.7).х 2х 1

Notes.

- display brightness and contrast settings are saved in the memory

when the unit is turned off.

- To exit quick menu, press and hold down the M (3) button or wait 5

sec for automatic exit.

MAIN MENU FUNCTIONS

Press the UP(2)/ DOWN(5) buttons to switch between the menu

options.

Menu navigation is cyclical: as soon as the last menu option of the

first tab is reached, first menu option of the second tab starts.

Enter the main menu with a long press of the М (3) button.

Exit the menu with a long press of the М button.(3)

Enter a menu option with a brief press of the М button.(3)

Automatic exit takes place in 10 sec of inactivity (buttons are not

pressed).

Upon exit from the menu the cursor location is memorized only for

the duration of the working session (i.e. until the unit is turned off).

Upon restarting the device and entering the menu the cursor will be

located on the first menu option.

MENU CONTENTS:

Tab 1

Wi-Fi activationMenu

Rocks

Identiﬁcation

Forest

Automatic

Semi-Automatic

Manual

Black Hot

Red Hot

Red Monochrome

Rainbow

Ultramarine

Violet

Sepia

User

Tab 2

Language

Date

Clock

Unit of

measurement

Reset

Format

General settings

LRF

Reticle shape

TPA function

THD function

Menu contents and description

Wi-Fi Wi-Fi ON/OFF

Oﬀ

= Press and hold down the М (3) button to enter the

main menu.

UP (2) / DOWN (5) buttons.

= Select the desired menu option with the

= Turn Wi-Fi on/off with a short press of the M

button.

Image

Detail

Boost

Oﬀ

Turn on/off Image Detail Boost:

= Press and hold down the М (3) button to enter the

main menu.

= Select the desired menu option with the UP (2) /

DOWN (5) buttons.

= Turn Image Detail Boost on/off with a short press

of the M (3) button.

Color

palettes

= Basic image mode is «White Hot»

= To select another palette:

Selecting colour palette

Operating

mode

The devices have four operating modes of the

thermal imager: Forest (observation mode of

objects within low thermal contrast conditions),

Rocks (observation mode of objects within high

thermal contrast conditions), Identification (high

detalization mode), User (individual brightness and

contrast settings).

= Press and hold the Menu button to enter the

menu.

FOREST MODE – This is the best mode when

searching and observing within field conditions,

against the background of leaves, bushes and

grass. The mode is highly informative about an

object being observed as well as landscape details.

= Select one of the settings described below with

the UP / DOWN buttons.

IDENTIFICAION MODE – This is the best mode

when observing objects within adverse weather

conditions (fog, mist, rain and snow). It allows you to

recognize the characteristics of an object being

observed more clearly. Zoom increase may be

accompanied by insignificant image graininess.

USER MODE – It allows you to configure and save

custom brightness and contrast setti

Note: Quick activation of the operating modes is

possible by using the DOWN button (5). Long press

of the DOWN button (5) activates the switching of

the operating modes.

= A short press of the Menu button opens the menu.

= Select the 'Operating mode' option.

= A short press of the Menu button confirms the

selection.

ROCKS MODE – This is the best mode when

observing objects after a sunny day or within urban

conditions.

= Press and hold down the М (3) button to enter the

main menu.

= Select the desired palette with the UP (2)/

DOWN (5) buttons.

= Confirm your selection with a brief press of the

M (3) button.

Calibration

Wi-Fi

settings

This menu option allows you to set up your device

for operation in a Wi-Fi network.

Wi-Fi setup

This menu option allows you to set a password to

access your thermal imager from an external

device.

The password is used to connect an external device

(i.e. smartphone) to your thermal imager.

= Press and hold down the М (3) button to enter the

main menu.

= Select the menu option with the UP (2)/ DOWN (5)

buttons.

= Press briefly the M (3) button to enter submenu

«PAS».

= The default password (12345678) will appear on

the screen.

Password

setup

12345

Black Hot palette (white colour corresponds to

low temperature, black colour – to high

temperature)

Red Hot

Red Monochrome

Rainbow

Ultramarine

Violet

Sepia

Note: A long press of the UP (2) button also

activates the change of a color palette.

There are three calibration modes: manual (M),

semi-automatic (SA) and automatic (А).

Selecting calibration mode

= Press and hold down the М (3) button to enter the

main menu.

= Select the desired calibration mode with the UP

(2)/DOWN (5) buttons.

More details in the section «Sensor calibration».

= Confirm your selection with a brief press of the M

button.

PiP Mode

= Press and hold the Menu button (3) to enter the

menu.

Selection of the Picture in Picture Mode

= A short press of the Menu button (3) switches the

mode on/off.

= Select the 'PiP Mode' option

= Set the desired password with the UP (2) /

DOWN (5) buttons (button UP (2) to increase

value; button DOWN (5) to reduce).

= Switch between digits with a short press of the M

button.

= Save the password and exit the submenu with a

long press of the M (3) button.

Access

level setup

Owner

Guest

This menu option allows you to set required access

level of the Stream Vision application to your

device.

Access level setup

= Access level Owner.

The Stream Vision user has the complete access to

all device's functions.

= Access level Guest.

The Stream Vision user has the access only to the

real time video stream from the device.

Settings

The following settings are available:

English

Selecting interface language

= Press and hold down the М (3) button to enter the

main menu.

= Press briefly М (3) to confirm.

= Select one of the available interface languages

with a short press of the UP (2)/ DOWN (5)

buttons: English, French, German, Spanish,

Russian.

= Select option «Settings» with the UP (2)/

DOWN (5) buttons. Press briefly М (3) to confirm.

= "Language" with Select option UP (2)/

DOWN (5).

= Switch between languages with a brief press of

the M (3) button.

= Save selection and exit the submenu with a long

Language

Date

Date setup

= Press briefly М (3) to confirm.

= Select option "Date" with UP (2)/ DOWN (5).

= Press and hold down the М (3) button to enter the

main menu.

= Select option «Settings» with the UP (2)/

DOWN (5) buttons. Press briefly М to confirm.

Time

= Press briefly М (3) to confirm.

= Select hour value with a brief press of the UP (2)/

DOWN (5) buttons.

= Switch to hour setup with a brief press of the M (3)

button.

= Save selected time and exit the submenu with a

long press of the M (3) button.

= Select option «Settings» with the UP (2)/

DOWN (5) buttons. Press briefly М (3) to confirm.

= Switch to minute setup with a brief press of the M

(3) button.

Time setup

= Select option "Time" with UP (2)/ DOWN(5).

= Press and hold down the М (3) button to enter the

main menu.

= Select the desired time format with a short press

of the UP/ DOWN buttons: 24 or PM/AM.

= Select minute value with a brief press of the

UP (2)/ DOWN (5) buttons.

Units of

measure

= Select option «Settings» with the UP (2)/DOWN

(5) buttons. Press briefly М to confirm.

Selection of units of measurement

= Select option "Units of measure" with

UP/DOWN.

= Ex it to s ettin gs subm enu t ake s p la ce

automatically.

= Press briefly М to confirm.

= Press and hold down the М (3) button to enter the

main menu.

= Select the desired unit of measurement - metres

or yards - with UP/DOWN. Press briefly М to

confirm.

= Save selected date and exit the submenu with a

long press of the M button.

= Date format is displayed as: YYYY/MM/DD

(year/month/day)

= Select the correct values for the year, month and

date with a short press of the UP/ DOWN buttons.

= Switch between digits with a short press of the M

button.

Reset

= If «Yes» is selected, display will show «Return

default settings?» and «Yes» and «No»

options. Select «Yes» to restore default settings.

Restore default settings

= With a short press of the UP/ DOWN buttons

select «Yes» to restore default settings or «No»

to abort.

= Select option «Settings» with the UP (2)/DOWN

(5) buttons. Press briefly М to confirm.

= Confirm selection with a brief press of the M

button.

= Press and hold down the М (3) button to enter the

main menu.

= Select option "Reset" with UP/DOWN. Press

briefly М to confirm.

The following settings will be restored to their

original values before changes made by the user:

= Unit’s operating mode – Forest

= Operating mode of video recorder – video

= Calibration mode – automatic

= If «No» is selected, action is aborted and you

return to the submenu.

= Language – English

= Wi-Fi – off (default password)

= Magnification – off (no digital zoom)

= PiP – off

= Colour palette – White Hot

= Unit of measurement - metric

Warning: date and time settings, default pixel map

and remote control activation are not restored.

= Confirm selection with a short press of the M

button.

= Enter the Format submenu with a short press of

the M button.

= With a short press of the UP/ DOWN buttons

select «Yes» to format the memory card or «No»

to return to the submenu.

= Press briefly М to confirm.

Format

= Press and hold down the М (3) button to enter the

main menu.

This menu option allows you to format your device's

Flash card or memory card (erase all files from its

memory).

Formatting

= Select option «Settings» with the UP (2)/DOWN

(5) buttons. Press briefly М to confirm.

Rangefinder

Selection of reticle shape

Function «Target position angle» (TPA)

«THD» function

Menu item «Rangefinder» allows you to set up built-in rangefinder’s

parameters as follows:

џ Selected reticle will appear on the display.

џ Confirm selection with a brief press of the М (3) button.

џ The reticle will disappear from the display if the rangefinder is not used

longer than 4 seconds.

џ Confirm selection with a brief press of the M (3) button.

џ Function «TPA» allows you to change the angle of target location

(angle of elevation). When the function is activated, the angle is shown

continuously. When the function is disabled, the angle is shown if the

rangefinder is working. The angle is shown in a pop-up menu during

measurement.

џ Select to activate «TPA».

џ Confirm selection with a brief press of the M (3) button. Hereinafter

message THD will appear above the distance readings.

џ Select to activate «THD».

џ «THD» function allows you to measure true horizontla distance to a

target based on the angle of elevation value.

џ Select one of the three reticle shapes with the UP (2) and

DOWN (5) buttons.

= parameter UP (2) DOWN (5) buttons.Set the desired with the and

= Rangefinder MEnter the submenu " " with a short press of the button.

= Enter the main menu with a long press of the M (3) button.

LRF

= If «Yes» is selected, display will show «Do you want to format

memory card?» and «Yes» and «No» options. Select «Yes» to

format the memory card.

= Message «Memory card formatting» means that formatting is in

progress.

= Upon completion of formatting the message «Formatting

completed» is shown.

= If «No» is selected, formatting is aborted and you return to the

submenu.

Remote

Control

Remote control activation (bought separately)

Before operating the remote control (RC),

remember to activate it as follows:

= Display shows message «Wait» and countdown

starts (30 sec), within which hold down for two

seconds any RC button.

= If error occurs the message «Connection failed»

appears . Repeat the procedure.

= If activation is successful, the message

«Connection complete» appears .

= The RC is activated and ready for use.

= To unlink the RC, press the М button, wait for the

countdown to expire without pressing any RC

button for 30 sec.

= Now you can activate your RC again or activate

another RC.

= All remote controls previously linked to your

device are now unlinked.

= Press and hold down the М (3) button to enter the

main menu.

= Select option « » with the UP Remote Control

(2)/DOWN (5) buttons. Press briefly М to confirm.

= Press briefly М to confirm.

Accolade 2 LRF binoculars thermal allow the user

to repair defective pixels on the detector using a

software-based method or to abort deletion.

Defective pixel repair

When operating a thermal imager, defective (dead)

pixels (bright or dark dots with constant brightness)

may become visible on the sensor.

Defective pixels on the sensor may proportionally

increase in size when digital zoom is activated.

Defective

pixel repair

= Press and hold down the М (3) button to enter the

main menu.

= Press briefly М to confirm.

= Select option « » with the Defective pixel repair

UP (2)/DOWN (5) buttons. Press briefly М to

confirm.

= A marker (H) appears on the left side of the

display.

x=95

y=99

This option allows the user to view the following

information about the device:

= SKU number

= Full name

= serial number

Device

information

Select menu option Device information with a brief press of the M button

to review information.

= Confirm selection with a short press of the M

button.

This option allows you to cancel deletion of the

defective pixels and return them to the original

state.

= Select «Yes» if you wish to return to default

defective pixel pattern, or «No» if you do not.

= Select icon and press М.

Return to default defective pixel pattern

= Enter the submenu with a brief press of the M

button.

= On the right side of the display appears

«magnifying glass» (G) – a magnified image in a

frame with a fixed cross , designed for easier

detection of a defective pixel and to match the

pixel with the marker, horizontal and vertical

arrows for X and Y axes (I) showing marker's

movement.

= With a short press of the UP/ DOWN buttons

move the marker to align it with a defective pixel.

= Switch the direction of the marker from horizontal

to vertical and vice versa with a short press of the

M button.

= Align the defective pixel with the fixed cross in the

frame – the pixel should disappear.

= Delete the defective pixel with a brief press of the

REC (4) button.

= A brief message «OK» appears in the frame in

case of success.

= Then you can delete another defective pixel by

moving the marker along the display.

= Exit «Defective pixel repair» with a long press of

the M button.

Attention! The display of a thermal imager may have 1-2

pixels represented as bright white or color (blue, red) dots

which cannot be deleted and are not a defect.

= hardware version

= software version

= service information

The status bar is located in the lower part of the display and shows

information on the actual operating status of the device, including:

16x

12:30AM

1 2 3 4 5 76

(if the device is powered by an external power supply)

(5) Wi-Fi connection status

(4) Current full magnification (for example, 16x)

(2) Operating mode

(3) Calibration mode

(if the device is powered by the Battery Pack) or

External battery power indicator

(in the automatic calibration mode, three seconds before automatic

calibration a countdown timer 00:01 is shown in place of the calibration

mode icon).

(6) Running time

(shown only if the «Black Hot» palette is selected)

(7) Battery charge level

(1) Colour palette

STATUS BAR

BUILT-IN LASER RANGEFINDER

The binoculars are equipped with a built-in rangefinder (17), allowing

you to measure distance to objects up to 1000m away.

How the rangefinder works:

џ Point the rangefinding reticle at an object and press the "UP"

button.

џ In the top right corner of the display you will see distance in metres

(or yards - depending on settings).

џ Turn on the device, set up image according to section "Operation",

press the UP (2) or LRF (21) button on remote control - rangefinding

reticle appears; in the top right corner of the display dashes of

distance values with unit of measurement appear, i.e. the rangefinder

enters the stand-by mode.

џ If PiP mode is activated, the aiming reticle disappers upon

activation of the rangefinder and the PiP window remains active.

Note: if the rangefinder is idle longer than for 4 seconds, it turns off

automatically.

The built-in recorder operates in two modes - VIDEO and PHOTO.

VIDEO mode. Video recording

The device in the VIDEO mode upon turning on.

In the top left corner you will see icon and remaining recording

time 2:12.in the format HH:MM (hours: minutes)

Upon start of video recording icon disappears, and icon REC and

recording timer in the format MM:SS (minutes : seconds) appear

instead:

Start video recording with a short press of the REC (4) button.

REC 00:25

VIDEO RECORDING AND PHOTOGRAPHY

Accolade 2 LRF thermal imaging binoculars feature video recording and

photography of the image being ranged to the internal memory card.

Before using this feature, please read the menu options «Date setup»,

«Time setup» of the section «Main menu functions».

џ Accuracy of measurement and maximum range depend on the

reflection ratio of the target surface, the angle at which the emitting

beam falls on the target surface and environmental conditions.

Reflectivity is also affected by surface texture, colour, size and shape

of the target. A shiny or brightly coloured surface is normally more

reflective than a dark surface.

џ Measuring range to a small sized target is more difficult than to a

large sized target.

џ Accuracy of measurement can also be affected by light conditions,

fog, haze, rain, snow etc. Ranging performance can degrade in bright

conditions orwhen ranging towards the sun.

Peculiarities of operation

Operation in SCAN mode:

џ If measurement fails, dashes will appear on the display.

Notes:

џ To measure distance in scanning mode, hold down the UP (2) or

LRF (21) button on remote control for longer then two seconds.

Measurement readings will be changing in real time as you point the

binoculars at different objects. Message SCAN appears in the top right

corner.

џ To exit SCAN mode, press UP or LRF (RC) button again.

џ In 4 seconds of inactivity (no measurement is taken) the rangefinder

turns off, the rangefinding reticle with readings disappears from the

display.

џ To select a unit of measurement (metres or yards) go to "Settings".

џ To select a rangefinding reticle, please go to the respective menu

option.

- Maximum duration of a recorded file is seven minutes. After this

time expires a video is recorded into a new file. The number of

recorded files is limited by the capacity of unit's internal memory.

Attention!

- check regularly the free capacity of the internal memory, move

recorded footage to other storage media to free up space on the

internal memory card.

Download links and QR codes are shown below:

To playback video ﬁles recorded by thermal imaging devices on iOS-

based computers, we recommend that you use VLC video player or

Elmedia player.

IMPORTANT!

Photo mode. Photography

«>100» means that you can take more than 100 pictures. If the

number of available pictures is less than 100, actual amount of

available pictures (for example 98) is shown next to the icon .

Take a picture with a brief press of the REC button. The image freezes

for 0.5 sec and a photo is saved to the internal memory.

Switch to the Photo mode with a long press of the (4) button. REC

in the top left corner of the display you can see: photography icon ,

- you can enter and operate the menu during video recording;

- recorded videos and photos are saved to the built-in memory card in

the format img_xxx.jpg (photos); video_xxx.avi (videos). xxx – three-

digit counter for videos and photos;

Notes:

- counter for multimedia files cannot be reset;

Stop recording video with a long press of the REC button.

Video files are saved to the memory card after stopping video.

Switch between modes (Video-> Photo-> Video) with a long press of the

REC button.

Pause and resume recording video with a short press of the REC

button.

The DISPLAY OFF function deactivates transmission of image to the

display by minimizing its brightness. This prevents accidental disclosure.

The device keeps running.

When the device is on, hold down the ON/OFF (1) button. Display goes

out, message «Display off».

To activate the display, press briefly the ON/OFF button.

When holding down the ON/OFF button, the display shows «Display

off» message with countdown, the device will turn off.

FUNCTION DISPLAY OFF

Connection status

Status bar indication

WI-FI FUNCTION

Your thermal imager features wireless connection option (Wi-Fi) which

links it with external appliances (smartphone, tablet PC).

Wi-Fi operation is shown in the status bar as follows:

Turn on the wireless module in the respective menu option.

Wi-Fi activated by the user,

Wi-Fi is on, no connection with

device

Wi-Fi in the device is being

activated

Wi-Fi is on, device connected

Wi-Fi is off

After a password is generated on an external appliance (please refer

to the menu option «Wi-Fi setup» of the section «Main menu

functions» of this user manual) and connection is established, the

icon in the status bar changes to .

Your device is detected by an external device as «Accolade 2

LRF_XXXX», where XXXX – is the last four digits of device's serial

number».

VLC Video Player ELMEDIA Video Player

FUNCTION PiP

PiP («Picture in Picture») allows you to see

a zoomed image simultaneously with the

main image in a dedicated window.

6.9x

3.1x

Enabling / disabling the PiP function is

carried out in the main menu (see section

13 "Main menu functions").

Change zoom ratio in the PiP window with a short press of the DOWN

button.

The zoomed image is displayed in a dedicated window, with the full

optical magnification being shown.

The main image is shown with optical magnification ratio which

corresponds to ratio x1.0.

When PiP is turned on, you can operate the discrete and continuous

digital zoom. The full optical magnification will take place only in the

dedicated window.

When PiP is turned off, the image is shown with the optical

magnification set for the PiP function.

STREAM VISION

Accolade 2 LRF thermal imaging binoculars support Stream Vision

technology which allows you to stream an image from the display of

your thermal imager to a smartphone or tablet PC via Wi-Fi in real time

mode. You can find further guidelines on Stream Vision on our web site

www.pulsar-vision.com

1. Download free of charge Stream Vision App on or Google Play App

Store. Scan the QR codes to download Stream Vision free of charge:

How to update instructions are as below:

Note: the Stream Vision application allows you to update the firmware

features of your thermal imager.

Connection modes:

Memory card (external memory).

Note: The Battery pack installed in the device is not being charged!

Power.

In this mode PC/laptop is used as an external power supply. The

status bar shows icon . The device continues operating and all

functions are available.

When USB is disconnected from the device where connection is in

the USB Mass storage device mode, the device remains on the OFF

state. Turn the device on for further operation.

If video recording was in progress when connection was made,

recording stops and video is saved.

In this mode the device is detected by the computer as a flash card.

This mode is designed for work with the files saved in device's

memory. The device's functions are not available in this mode; the

device turns off automatically.

When USB is disconnected from the device when in the Power mode,

the device keeps operating with Battery Pack, if available, and it has

sufficient charge.

USB CONNECTION

Connect one end of the USB cable (16) to the Micro-USB (15) port of

your device, and the other end to the USB port of your PC/laptop.

Turn the device on with a short press of the ON/OFF (1) button (device

that has been turned off cannot be detected by your computer).

Your device will be detected by the computer automatically; no drivers

need to be installed.

Two connection modes will appear

on the display:

Memory card (external memory)

and Power.

Select connection mode with UP

and DOWN buttons.

Confirm selection with a short press of the M button.

USB connection

Use as power

Use as memory card

3. Launch Stream Vision and go to section “My Devices”.

2. Connect your Pulsar device to your mobile device (smartphone or

tablet).

- if your Pulsar device is not connected to your phone but it's already in

the “My Devices” section, you may use Wi-Fi to download update.

4. Select your Pulsar device and press “Check Updates”.

Important:

- if your Pulsar device is connected to phone, please turn on “Mobile

data transfer” (GPRS/3G/4G) to download update;

5. Wait for the update to download and install. Pulsar device will reboot

and will be ready to operate.

Check the objective and eyepieces lenses; rangefinder’s emitter

and receiver lenses. If required, remove dust and sand (preferably

by a noncontact method). Clean the external surfaces of the lenses

with products expressly designed for this purpose.

Store the device in a carrying case. Remove the Battery Pack

for long-term storage.

Maintenance should be carried out no less frequently than twice a

year, and should consist of the following measures:

MAINTENANCE AND STORAGE

Wipe external plastic and metal surfaces clean of dust and dirt with

a soft cloth moistened with a synthetic cleaning agent.

Clean the electric terminals of the Battery Pack and device's battery

slot using a grease-free organic solvent.

WIRELESS REMOTE CONTROL

(bought separately)

Wireless remote control (RC) duplicates the power on function,

digital zoom, rangefinder control, and menu navigation.

Brief press Enter quick

Turn on

device /

Calibrate

sensor

Controller

(18)

Button

ON (19)

Activate

incremetal

zoom

Button

ZOOM (20)

distance

Activate

Measure

rangefinder /

Button

LRF (21)

Long press Enter main

Display Off /

Turn off

device

Activate

function PiP

Activate

SCAN mode

Clockwise

rotation

Increase

parameter,

move upwards

Counter-

clockwise

rotation

Decrease

parameter,

move

downwards

TROUBLESHOOTING

The table presented below lists some potential problems that may occur

when using the device. If a problem encountered with the device is not

listed, or if the recommended action does not resolve the problem, the

unit should be returned for repair.

The thermal imager

does not turn on.

power supply.

operate on external

The device does not

Battery Pack is discharged.

USB cable is damaged.

Charge the battery.

Replace USB cable.

Check

Corrective action

Problem

External power supply is

discharged.

Charge the external power

supply (if necessary).

The image is blurry,

with vertical stripes

and uneven

background.

The image is too

dark.

Poor image quality /

Detection range

reduced.

Calibration is required.

Brightness or contrast level

is too low.

Problems described may arise in adverse weather conditions

(snow, rain, fog etc.).

Carry out calibration according

to Section

«SENSOR CALIBRATION».

Adjust brightness/contrast with

the UP/DOWN buttons.

Smartphone or tablet

PC cannot be

connected to the

device.

Password in the unit was

changed.

Delete network and connect

again inserting the password

saved in the device.

There are too many Wi-Fi

networks in the area where the

device is located which may

cause signal interference.

To ensure stable Wi-Fi

performance, move the device

to an area with few or no Wi-Fi

networks.

TECHNICAL INSPECTION

Check:

External view (there should be no cracks on the housing).

Correct functioning of the controls.

The state of the objective, eyepiece and rangefinder lenses (there

should be no cracks, spot, dust, deposits etc.).

The state of the Battery Pack (should be charged) and electric

terminals (there should be no oxidation).

The device does not

operate on external

power supply.

Battery Pack is not

installed on the

device.

Stable operation of the

device with certain external

power supplies (like power

bank) is not guaranteed

unless the standard

IPS7/IPS14 Battery Pack is

installed.

Before using an external power

supply, install the Battery Pack

(it may be empty) on the

device. You can remove the

Battery Pack once the device

turns on.

Place the in line-of-sightdevice

of the Wi-Fi signal.

No Wi-Fi signal or

erratic signal.

The device cannot

be powered on

with wireless remote

control.

When using the

scope at below zero

temperatures the

image quality is

worse than at

positive

temperatures.

Problem

The device is beyond reliable

Wi-Fi range.

There are obstacles between

the device and the signal

receiver (i.e. concrete walls).

Low battery.

Remote control is not

activated.

Activate the remote control

according to instructions.

Install a new CR2032 battery.

Because of variations in thermal conductivity, objects (surrounding

environment, background) under observation become warm more

quickly at above-zero temperatures, which allows higher

temperature contrast and, thus, the quality of the image produced

by a thermal imager will be better.

At low operating temperatures, objects under observation

(background) normally cool down to roughly identical

temperatures, which leads to lower temperature contrast, and to

image quality (precision) degradation. This is normal for thermal

imaging device.

Check

Corrective action

Rangefinder will not

measure distance.

There is an object in front of

the receiver or emitter lens

preventing signal

transmission.

Make sure that: the lenses are

not blocked by your hand or

fingers; the lenses are clean.

Inclement weather conditions (rain, mist, snow).

Large measurement

error.

The device is not being held

steadily when measuring.

Do not stress the device

when measuring.

Distance to the object

exceeds 1000 m.

Pick an object at a distance

longer than 1000m.

Pick an object with higher

reflection ratio (see point

»Peculiarities of operation»

in section 14.

Low reflection ratio (for

example, tree leaves).

NOTES

The term of possible repair of the device is ﬁve years.

Color stripes appear

on the display or

images disappears.

The device has accumulated

static charge during

operation.

As soon as the impact of the

static charge is over, the device

may reboot automatically;

alternatively please turn off and

restart the device.

Jumelles d'imagerie thermique

Accolade 2 LRF

Bloc batterie IPS7

Chargeur de batterie avec

chargeur alimentation secteur

Câble USB

CONTENUS DE L'EMBALLAGE

Ce produit peut être modifié en fonction des améliorations apportées à sa conception.

La dernière édition de ce manuel d'utilisation est disponible sur www.pulsar-vision.com

Mallette de transport

Courroie de cou

Guide de démarrage rapide

Chiffon pour objectif

Carte de garantie

Les sont conçues pour être utilisées la nuit ou le jour par jumelles

conditions météo défavorables (brouillard, smog, pluie) pour voir à

travers les obstacles masquant les cibles (branches, herbes hautes,

broussailles épaisses, etc.).

Les d'imagerie thermique sont conçues pour jumelles Accolade 2 LRF

divers domaines d'applications comprenant la chasse de nuit,

l'observation, l'orientation précise, les opérations de sauvetage, etc.

Les jumelles sont équipes d’un télémetre intégré qui mesure la distance

d’un objet à une distance de jusqu'à 1000 m.

Les d'imagerie thermique sont basées sur un jumelles Accolade 2 LRF

capteur IR (microbolomètre non refroidi). Les jumelles offrent une

observation confortable avec les deux yeux.

L jumelleses ne nécessitent pas une source de lumière extérieure et ne

sont pas affectées par l'exposition à une lumière brillante.

DESCRIPTION

CARACTÉRISTIQUES

Confortable pour longue observation

Transmission vidéo via Wi-Fi

Télémètre stadiamétrique

Complètement étanche (IPX7)

Module Wi-Fi intégré

Partage vidéo en direct via Internet

Taux de rafraîchissement 50 Hz

Affichage AMOLED résistant au gel

Batteries rechargeables à changement rapide et longue durée

Écartement inter-pupillaire variable

Enregistreur vidéo incorporé

Télémètre laser précis intégré (jusqu'à 1000 m)

Principales caractéristiques:

MODÈLE Accolade 2 LRF

SKU#

Li-Ion Battery Pack IPS7 / 6400 mAh / DC 3.7V

-25 °С ... +50 °С

300 min vidéo ou ˃20 000 images

5V (USB)

IPХ7

16 Gb

2,4 GHz

SPÉCIFICATIONS

Type

Résolution, pixels

Taux de rafraîchissement, Hz

Taille pixels, µm

Caractéristiques optiques

Grossissement, x

Zoom numérique continu, x

Zoom numérique

Lentille d'objectif

Distance de prise de vue rapprochée, m

Diamètre pupille de sortie, mm

Champ de vision (H), degrés / m@100m

Réglage de dioptre, D

Distance de detection

(d'un animal,comme un cerf), m

Affichage

Type

Résolution, pixels

Caractéristiques opérationnelles

Alimentation

Type batterie / capacité / tension sortie

Alimentation extérieure

Temps de fonctionnement sur

bloc batterie (à t = 22 °C), h*

Degré de protection, code IP (CEI60529)

Températures opératoires

Dimensions, mm

Poids (sans batteries), kg

Enregistreur vidéo

Résolution vidéo/photo, pixel

Format vidéo/photo

Mémoire incorporée

Capacité de mémoire incorporée

Voie Wi-Fi

Fréquence

Standard

Distance de réception en

ligne de visée directe, m

Microbolomètre

AMOLED

640x480

802,11 b/g

640x480

.avi / .jpg

640x480

2,5

2,5-20

12,4 / 21,8

±5

1800

164x130x64

0,6

1:1,2

x2/x4/x8

56-71

3,7V

Non refroidi

Réglage distance interpupillaire, mm

Classe de dispositifs laser selon

IEC 60825-1:2014

905

1000

+/-1

Caractéristiques du télémètre

Longueur d'onde, nm

Distance de mesure maximale, m**

Précision de mesure, m

** Dépend sur les caractéristiques de l'objet sous observation et les conditions environnementales.

* La durée de fonctionnement réelle dépend du degré d'utilisation du Wi-Fi, de l'enregistreur vidéo intégré

et du télémètre.

XP50

77410

VUE EXTÉRIEURE ET COMMANDES

Télémètre laser intégré

Port micro-USB

Couvercle de lentille

Bouton navigation UP

Bague de mise au point d'objectif

Câble USB

Bouton navigation DOWN

Bouton marche/arrêt ON/OFF / calibration

Montage trépied

Bagues de réglage de la distance interpupillaire

Bouton enregistrement REC

Bagues de réglage de dioptre

Bouton MENU

Bloc batterie

Système de refroidissement de radiateur

Objectif

Levier pour bloc batterie

Palettes de couleurs

Trois modes de calibration

Trois modes opératoires

Mode «Picture-in-Picture»

Réglage manuel de contraste et luminosité

Supplémentaires caractéristiques:

Fig. 1

La pagina sta caricando ...

Pulsar Nightvision PULSAR Wärmebildgerät Binokular Accolade 2 LRF XP50 mit eingebautem Entfernungsmesser Manuale del proprietario

Marca: Pulsar Nightvision

Modello: PULSAR Wärmebildgerät Binokular Accolade 2 LRF XP50 mit eingebautem Entfernungsmesser

Tipo: Manuale del proprietario

Scarica il pdf

rapporto

Pulsar Nightvision PULSAR Wärmebildgerät Binokular Accolade 2 LRF XP50 mit eingebautem Entfernungsmesser Manuale del proprietario

Pulsar Nightvision PULSAR Wärmebildgerät Binokular Accolade 2 LRF XP50 mit eingebautem Entfernungsmesser Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti