Amprobe ACD15PRO-T Manuale del proprietario

User Manual

• Mode d’emploi

• Bedienungshandbuch

• Manual d’Uso

• Manual de uso

• Användarhandbok

ACD-15 Pro &

ACD-15 TRMS Pro

Clamp-on Multimeter Series

ACD-15 Pro &

ACD-15 TRMS Pro

Clamp-on Multimeter Series

Users Manual

Limited Warranty and Limitation of Liability

Your Amprobe product will be free from defects in material and workmanship for 1

year from the date of purchase. This warranty does not cover fuses, disposable batteries

or damage from accident, neglect, misuse, alteration, contamination, or abnormal

conditions of operation or handling. Resellers are not authorized to extend any other

warranty on Amprobe’s behalf. To obtain service during the warranty period, return the

product with proof of purchase to an authorized Amprobe Test Tools Service Center or

to an Amprobe dealer or distributor. See Repair Section for details. THIS WARRANTY

IS YOUR ONLY REMEDY. ALL OTHER WARRANTIES - WHETHER EXPRESS, IMPLIED

OR STAUTORY - INCLUDING IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR

PURPOSE OR MERCHANTABILITY, ARE HEREBY DISCLAIMED. MANUFACTURER

SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL

DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since some states or

countries do not allow the exclusion or limitation of an implied warranty or of incidental

or consequential damages, this limitation of liability may not apply to you.

Repair

All test tools returned for warranty or non-warranty repair or for calibration should

be accompanied by the following: your name, company’s name, address, telephone

number, and proof of purchase. Additionally, please include a brief description of

the problem or the service requested and include the test leads with the meter. Non-

warranty repair or replacement charges should be remitted in the form of a check, a

money order, credit card with expiration date, or a purchase order made payable to

Amprobe® Test Tools.

In-Warranty Repairs and Replacement – All Countries

Please read the warranty statement and check your battery before requesting

repair. During the warranty period any defective test tool can be returned to your

Amprobe® Test Tools distributor for an exchange for the same or like product.

Please check the “Where to Buy” section on www.amprobe.com for a list of

distributors near you. Additionally, in the United States and Canada In-Warranty

repair and replacement units can also be sent to a Amprobe® Test Tools Service

Center (see address below).

Non-Warranty Repairs and Replacement – US and Canada

Non-warranty repairs in the United States and Canada should be sent to a

Amprobe® Test Tools Service Center. Call Amprobe® Test Tools or inquire at your

point of purchase for current repair and replacement rates.

In USA In Canada

Amprobe Test Tools Amprobe Test Tools

Everett, WA 98203 Mississauga, ON L4Z 1X9

Tel: 877-AMPROBE (267-7623) Tel: 905-890-7600

Non-Warranty Repairs and Replacement – Europe

European non-warranty units can be replaced by your Amprobe® Test Tools

distributor for a nominal charge. Please check the “Where to Buy” section on

www.amprobe.com for a list of distributors near you.

European Correspondence Address*

Amprobe® Test Tools Europe

In den Engematten 14

79286 Glottertal, Germany

Tel.: +49 (0) 7684 8009 - 0

*(Correspondence only – no repair or replacement available from this address.

European customers please contact your distributor.)

1

ACD-15 Pro & ACD-15 TRMS Pro

Clamp-on Multimeter Series

Contents

SAFETY ..................................................................................................................2

TERMS IN THIS MANUAL .................................................................................2

INTERNATIONAL ELECTRICAL SYMBOLS ...............................................................3

CE Directives .......................................................................................................3

PRODUCT DESCRIPTION ..................................................................................4

OPERATION ..........................................................................................................5

Hi-Z DCV, ACV & Line-Level Hz functions ...................................................6

AutoTectTM mode ...............................................................................................7

Electric Field EF-Detection ..............................................................................9

600Ω/ •/ functions ..........................................................................10

MAINTENANCE ...................................................................................................11

SPECIFICATIONS ..................................................................................................13

ELECTRICAL SPECIFICATIONS ..........................................................................14

2

SAFETY

This manual contains information and warnings that must be followed

to operate the instrument safely and maintain the instrument in a safe

operating condition. If the instrument is used in a manner not speciﬁed by the

manufacturer, the protection provided by the instrument may be impaired.

The meter meets the requirements for double insulation to EN61010-1:2001;

EN61010-2-032:2002), UL3111-2-032(1999):

Category III 600 Volts ac and dc.

PER IEC61010 OVERVOLTAGE INSTALLATION CATEGORY

OVERVOLTAGE CATEGORY II

Equipment of OVERVOLTAGE CATEGORY II is energy-consuming equipment to

be supplied from the ﬁxed installation.

Note – Examples include household, ofﬁce, and laboratory appliances.

OVERVOLTAGE CATEGORY III

Equipment of OVERVOLTAGE CATEGORY III is equipment in ﬁxed installations.

Note – Examples include switches in the ﬁxed installation and some equipment

for industrial use with permanent connection to the ﬁxed installation.

OVERVOLTAGE CATEGORY IV

Equipment of OVERVOLTAGE CATEGORY IV is for use at the origin of the

installation. Note – Examples include electricity meters and primary over-

current protection equipment.

TERMS IN THIS MANUAL

WARNING identiﬁes conditions and actions that could result in serious injury or

even death to the user.

CAUTION identiﬁes conditions and actions that could cause damage or

malfunction in the instrument.

WARNING

To reduce the risk of ﬁre or electric shock, do not expose this product to rain or

moisture. The meter is intended only for indoor use.

3

To avoid electrical shock hazard, observe the proper safety precautions when

working with voltages above 60 VDC or 30 VAC rms. These voltage levels pose a

potential shock hazard to the user.

Inspect test leads, connectors, and probes for damaged insulation or exposed metal

before using the instrument. If any defects are found, replace them immediately.

Do not touch test lead tips or the circuit being tested while power is applied to

the circuit being measured. To avoid accidentally short circuit of bare (uninsulated)

hazardous live conductors or busbars, switch them off before insertion and removal

of the current clamp jaws. Contact with the conductor could result in electric shock.

Keep your hands/ﬁngers behind the hand/ﬁnger barriers that indicate the limits of

safe access of the meter and the test leads during measurement.

Do not use the instrument in presence of explosive gas (material),

combustible gas (material), steam or dust.

CAUTION

Disconnect the test leads from the test points before changing meter functions.

INTERNATIONAL ELECTRICAL SYMBOLS

Caution ! Refer to the explanation in this Manual

Caution ! Risk of electric shock

Earth (Ground)

Double Insulation or Reinforced insulation

AC--Alternating Current

DC--Direct Current

Fuse



Conformity symbol, the instrument complies with the valid directives.

It complies with the EMC Directive (89/336/EEC) and the Low Voltage

Directive (73/23/EEC) with their valid standards.

Symbol for the marking of electrical and electronic equipment (WEEE

Directive 2002/96/EC).

Application around and removal from hazardous live conductors is

permitted

4

PRODUCT DESCRIPTION

This user’s manual uses only representative model(s) for illustrations. Please

refer speciﬁcation details for function availability to each model.

1) Non-Contact Voltage Detector,

AutoTect Feature: antenna position

2) Jaw marking lines for ACA position

error indication

3) Hand/Finger Barrier to indicate

the limits of safe access to the jaws

during current measurements

4) Push-buttons for special functions

& features

5) Input Jack for all functions EXCEPT

non-invasive ACA current function

6) Common (Ground reference) Input

Jack for all functions EXCEPT non-

invasive ACA current function

7) Slide-switch Selector to turn the

power ON/OFF and Select a function

8) 3-5/6 digits 6000 counts LCD display

9) Jaw trigger for opening the

transformer clamp jaws

10) Jaw center Indicators, at where

best ACA accuracy is speciﬁed

11) Transformer Clamp Jaws for AC

current magnetic ﬁeld pick up

-30.21

5

OPERATION

23.80

V

ACA Current clamp-on function

Set the slide-switch function selector to the  position. Inputs are made

through the clamp jaws for non-invasive ACA current measurements.

CAUTION

• Press the jaw trigger and clamp the jaws around the hot conductor of a circuit

for load current measurement. Make sure the jaws are completely closed, or

else it will introduce measurement errors. Enclosing more than one conductor

of a circuit will result in differential current (like identifying leakage current)

measurement.

• Adjacent current-carrying devices such as transformers, motors and conductor

wires will affect measurement accuracy. Keep the jaws away from them as

much as possible to minimize inﬂuence.

6

Hi-Z DCV, ACV & Line-Level Hz functions

Set the slide-switch function selector to the position that selects common

impedance (Hi-Z) voltage measurements. Input impedance is set at

approximately 5MΩ to minimize loading on circuits under tests. DCV is

the default function. The DC symbol “” appears. Press SELECT button

momentarily to select ACV. The AC symbol “” a ppears. Press momentarily

again to activate the Line-Level Hz function.

Note:

• Line-Level Hz input sensitivity varies automatically with ACV range selected

when Line-Level Hz is selected. AC 6V range has the highest and AC 600V

range has the lowest sensitivity. Measuring the signal in ACV function WHILE

selecting Line-Level Hz function in that ACV range automatically sets the

most appropriate sensitivity for higher voltage applications. This can avoid

electrical noises as in 110/220V line voltage applications for example. If the

reading shows zero due to insufﬁcient signal levels, select Line-Level Hz

function BEFORE making measurements (at AC 6V range) will set the highest

sensitivity.

7

AutoTectTM mode

Set the slide-switch function selector to the position. This innovative

AutoTectTM feature automatically selects measurement function of DCV, ACV or

Resistance (Ω) based on the input via the test leads.

• With no input, the meter displays “Auto” when it is ready.

• With no voltage signal but a resistance below 6MΩ is present, the meter

displays the resistance value. When below 25Ω (0.025kΩ) is present, the meter

also gives a continuity beep tone.

• When a signal above the threshold of +1.5 VDC, -1 VDC or 2 VAC up to the

rated 600V is present, the meter displays the voltage value in appropriate DC

or AC, whichever larger in peak magnitude.

• Overload-Alert Feature: When above rated 600V is present, the meter displays

“OL” with a warning beep tone for over-range indication. Disconnect the test

leads from the signal immediately to avoid hazards.

8

Note:

• Range-Lock Feature: When a measurement reading is being displayed in

AutoTectTM mode, press the RANGE button momentarily 1 time this locks the

function-range it is in. The symbol “ Auto”disappears. Range-lock can speed

up repetitive measurements. Press the button momentarily repeatedly to

step through the ranges. Press and hold the button for 1 second or more to

resume AutoTectTM mode.

• As Hazardous-Alert: When making resistance measurements in AutoTectTM

mode, an unexpected display of voltage readings alerts you that the object

under test is being energized.

• Ghost-voltage buster: Ghost-voltages are unwanted stray signals coupled

from adjacent hard signals, which confuse common multimeter voltage

measurements. Our AutoTectTM mode provides low (ramp-up) input

impedance (approx. 1.6kΩ at low voltage) to drain ghost voltages leaving

mainly hard signal values on meter readings. It is an invaluable feature for

precise indication of hard signals, such as distinguishing between hot and

open wires (to ground) in electrical installation applications.

WARNING:

• AutoTectTM mode input impedance increases abruptly from initial 1.6kΩ to

a few hundred kΩ’s on high voltage hard signals. “LoZ” displays on the LCD

to remind the users of being in such low impedance mode. Peak initial load

current, while probing directly to 600VAC for example, can be up to 530mA

(600V x 1.414 / 1.6kΩ), decreasing abruptly to approx. 4mA (600V x 1.414 /

210kΩ) within a fraction of a second. Do not use AutoTectTM mode on circuits

that could be damaged by such low input impedance. Instead, use slide-switch

function selector common input impedance voltage modes (Hi-Z of approx.

5MΩ) to minimize loading for such circuits.

Manual or Auto-ranging

When the function selected has more than one range, press the RANGE button

momentarily selects manual-ranging. The meter remains in the range it was in.

The LCD symbol Auto disappears. Press the button momentarily again to step

through the ranges. Press and hold the button for 1 second or more to resume

auto-ranging.

Note:

*Manual-ranging feature is not available to 600Ω/ •/ functions.

*To use Manual-ranging feature in AutoCheckTM mode, please see “Range-Lock

Feature” as explained in footnotes of AutoCheckTM mode section.

9

AC Voltage Detection - VolTectTM

At any function, press the EF (NCV) button momentarily to toggle to AC

Voltage Detection, VolTectTM. The meter displays “ ” when it is ready. Signal

strength is indicated as a series of bar-graph segments on the display plus

variable beep tones.

• Non-Contact EF-Detection (NCV): An antenna is located along the top of

the stationary jaw (See symbol on the jaw), which detects electric ﬁeld

surrounds current-carrying conductors. It is ideal for tracing live wiring

connections, locating wiring breakage and to distinguish between live or

earth connections.

• Probe-Contact EF-Detection: For more precise indication of live wires, such

as distinguishing between live and ground connections, use the Red (+) test

probe for direct contact measurements.

10

600Ω/ •/ functions

Set the slide-switch function selector to the 600Ω/ •/ position.

• 600Ω Resistance range with Audible-Continuity is the default function.

It is an extended low resistance range to complement the Resistance (Ω)

function in AutoCheckTM mode. Audible-Continuity response time is also

improved drastically (from that of AutoCheckTM mode) under such stand-alone

range architecture. Audible-Continuity is convenient for checking wiring

connections and operation of switches. A continuous beep tone indicates a

complete circuit.

• Press SELECT button momentarily selects Diode test function. The display

shows the approximate voltage drop across the test leads. When forward

biased, normal forward voltage drop for a good silicon diode is between

0.400V to 0.900V. A reading higher than that indicates a leaky diode

(defective). A zero reading indicates a shorted diode (defective), and the

meter gives a continuous beep warning. An OL indicates an 10 open diode

(defective). Reverse the test leads connections (reverse biased) across the

diode. The display shows OL if the diode is good. Any other readings indicate

the diode is resistive or shorted (defective).

11

• Press SELECT button momentarily AGAIN selects Capacitance function.

Capacitance measurement time varies with capacitance value. Only a few

seconds is required for measuring values of below 100μF. However, one

minute or more is required for measuring extreme values of around 2000μF.

HOLD  feature

The Hold feature freezes the display for later viewing. Press the HOLD 

button momentarily to toggle to the Hold feature. The symbol “” appears.

Backlighted display (model ACD-15 TRMS Pro only)

Press the SELECT button for 1 second or more to turn on or off the display

backlight feature.

Auto Power Off (APO)

The meter turns off intelligently after approximately 3 minutes of neither

signiﬁcant measurement nor button/switch activity. To wake up the meter from

APO, press any button or turn the rotary selector to OFF and back on again.

Always turn the rotary selector to OFF when the meter is not in use.

MAINTENANCE

WARNING

To avoid electrical shock, disconnect the meter from any circuit, remove the test

leads from the input jacks and turn OFF the meter before opening the case. Do

not operate w ith open case.

Trouble Shooting

If the instrument fails to operate, check batteries and test leads etc., and

replace as n ecessary. Double check operating procedure as described in this

user’s manual. If the instrument voltage-resistance input terminal was subjected

to high voltage transient (caused by lightning or switching surge to the system)

by accident or abnormal conditions of operation, the series fusible resistors will

be blown (become high impedance, open) like fuses to protect the user and the

instrument. Most measuring functions through this terminal will then be open

circuit. The series fusible resistors and the spark gaps should then be replaced

by qualiﬁed technician. Refer to the LIMITED WARRANTY section for obtaining

warranty or repairing service.

12

Cleaning and Storage

Periodically wipe the case with a damp cloth and mild detergent; do not use

abrasives or solvents. If the meter is not to be used for periods of longer than

60 days, remove the batteries and store them separately

Battery replacement

The meter uses standard 1.5V AAA Size (NEDA 24A or IEC LR03) battery X 2

Loosen the 2 captive screws from the battery cover case. Lift the battery cover

case. Replace the batteries. Replace battery cover case. Re-fasten the screws.

13

SPECIFICATIONS

GENERAL SPECIFICATIONS

Display : 3-5/6 digits 6000 counts LCD display(s)

Update Rate : 5 per second nominal

Polarity : Automatic

Low Battery : Below approx. 2.4V

Operating Temperature : 0°C to 40°C

Relative Humidity : Maximum relative humidity 80% for temperature up to

31°C decreasing linearly to 50% relative humidity at 40°C

Altitude : Operating below 2000m

Storage Temperature : -20o C to 60o C, < 80% R.H. (with battery removed)

Temperature Coefcient : nominal 0.15 x (speciﬁed accuracy) /OC @

(-20o C to 60o C), or otherwise speciﬁed

Sensing : Average sensing for ACD-15 PRO; True RMS sensing for ACD-15 TRMS PRO

Safety : Meets EN61010-1:2001; EN61010-2-032:2002), UL3111-2-032(1999):

Category III 600 Volts ac & dc

Transient protection : 6.5kV (1.2/50μs surge) for all models

Pollution degree : 2

E.M.C. : Meets EN61326(1997, 1998/A1), EN61000-4-2(1995), and EN61000-4-

3(1996) In an RF ﬁeld of 3V/m:

Capacitance function is not speciﬁed.

Total Accuracy = Speciﬁed Accuracy + 45 digits

Performance above 3V/m is not speciﬁed

Overload Protections :

ACA Clamp-on jaws : AC 2000A rms continuous

+ & COM terminals (all functions) : 600VDC/VAC rms

Power Supply : standard 1.5V AAA Size (NEDA 24A or IEC LR03) battery X 2

Power Consumption : 2.2mA typical for ACD-15 PRO; 2.8mA typical for ACD-15

TRMS PRO

APO Timing : Idle for 3 minutes

APO Consumption : 40μA typical on all model functions except that 230μA

typical on ACD- 15 TRMS PRO voltage & current functions

Dimension : L224mm X W78mm X H40mm 224 x 78 x 40mm (8.8 x 3.1 x 1.6”)

Weight : 220 gm approx (7.7 oz)

Jaw opening & Conductor diameter : 45mm max

Accessories : Test leads (pair), batteries installed, user’s manual, & soft carrying

pouch

14

ELECTRICAL SPECIFICATIONS

Accuracy is ±(% reading digits + number of digits) or otherwise speciﬁed, at

23O C ±5O C & less than 75% R.H. True RMS Model ACD-15 TRMS PRO ACV &

ACA clamp-on accuracies are speciﬁed from 5% to 100% of range or otherwise

speciﬁed. Maximum Crest Factor are as speciﬁed below, and with frequency

spectrums, besides fundamentals, fall within the meter speciﬁed AC bandwidth

for non-sinusoidal waveforms.

DC Voltage

RANGE Accuracy

6.000V 0.5% + 3d

60.00V 1.0% + 5d

600.0V 2.0% + 5d

NMRR : >30dB @ 50/60Hz

CMRR : >100dB @ DC, 50/60Hz,

Rs=1kΩ

Hi-Z DCV Input Impedance:

5MΩ, 90pF nominal

AutoTectTM Lo-Z DCV input

impedance: Initially 1.6kΩ, 90pF

nominal; Impedance increases

signiﬁcantly as display voltage

increases from 50V (typical). Typical

impedances vs display

voltages for reference are:

15kΩ @ 100V

100kΩ @ 300V

210kΩ @ 600V

AutoCheckTM DCV Threshold:

> +1.5VDC or < -1.0VDC nominal

Diode Tester

Open Circuit

Voltage

Test Current

< 1.6 VDC 0.4mA (typical)

Audible Threshold: between 0.015V

and 0.080V

Ohms

RANGE Accuracy 1)

6.000kΩ 2) 1.2% + 6d 3)

60.00kΩ, 600.0kΩ1.0% + 4d

6.000MΩ2.0% + 4d

Open Circuit Voltage : 0.4VDC typical

1)Cool down interval 2 minutes after

over 50V measurements in Auto-VΩ

position

2)Beeper on while reading < 0.025kΩ

3)Add 40d to speciﬁed accuracy while

reading is below 20% of range

600Ω with Continuity Beeper

RANGE Accuracy

600.0Ω2.0%+8d1)

Continuity Beeper Response: < 100μs

Open Circuit Voltage: 0.4VDC typical

Audible Threshold: between 10Ω and

300Ω

1)Add 40d to speciﬁed accuracy while

reading is below 20% of range

15

Frequency

Voltage Range Sensitivity

(Sine RMS)

Range

6.000V 4V 10Hz ~ 30kHz

60.00V 30V 10Hz ~ 1kHz

600.0V 60V 10Hz ~ 1kHz

Accuracy: 0.5%+4d

Max display: 9999 counts

AC Voltage

RANGE Accuracy

50Hz / 60Hz

6.000V, 60.00V 1.5% + 5d

600.0V 2.0% + 5d

50Hz ~ 500Hz

6.000V, 60.00V 2.0% + 5d

600.0V 2.5% + 5d

CMRR : >60dB @ DC to 60Hz, Rs=1kΩ

Hi-Z ACV Input Impedance:

5MΩ, 90pF nominal

AutoCheckTM Lo-Z ACV input impedance:

Initially 1.6kU, 90pF nominal;

Impedance increases signiﬁcantly

as display voltage increases from

50V (typical). Typical impedances vs

display voltages for reference are:

15kΩ @ 100V

100kΩ @ 300V

210kΩ @ 600V

AutoCheckTM ACV Threshold:

> 2VAC (50/60Hz) nominal

True RMS model ACD-15 TRMS PRO Crest

Factor:

< 1.6 : 1 at full scale & < 3.3 : 1 at half

scale

Capacitance

RANGE Accuracy1)

100.0nF 2) 1000nF,

10.00μF, 100.0μF,

2000μF

3.5%+5d 3)

1) Accuracies with ﬁlm capacitor or

better

2) Accuracy below 50nF is not

speciﬁed

3) Speciﬁed with battery voltage

above 2.8V

(approximately half full battery).

Accuracy decreases gradually to 12%

at low battery warning voltage of

approximately 2.4V

VolTectTM, AC Voltage Detection

Typical Voltage Bar Graph

Indication

15V TO 85V -

40V TO 130V - -

60V TO 210V - - -

90V TO 300V - - - -

ABOVE 120V - - - - -

Indication: Bar graph segments

& audible beep tones

proportional to the ﬁeld

strength

Detection Frequency: 50/60Hz

Detection Antenna: Top side of the

stationary jaw

Probe-Contact EF-Detection: For more

precise indication of live wires, use

the Red (+) probe for direct contact

measurements

16

ACA Current (Clamp-on)

RANGE Accuracy 1) 2) 3)

50Hz / 60Hz

400.0A, 2000A 1.5% + 5d

True RMS model ACD-15 TRMS PRO Crest

Factor:

< 2.0 : 1 at full scale & < 4.0 : 1 at half scale

1)Add 8d to speciﬁed accuracy while reading is below 10% of range

2)Induced error from adjacent current-carrying conductor: < 0.06A/A

3) Speciﬁed accuracy is for measurements made at the jaw center. When the

conductor is not positioned at the jaw center, position errors introduced are:

Add 1% to speciﬁed accuracy for measurements made WITHIN jaw marking

lines (away from jaw opening)

Add 4% to speciﬁed accuracy for measurements made BEYOND jaw marking

lines (toward jaws opening)

La pagina sta caricando ...

Amprobe ACD15PRO-T Manuale del proprietario

Amprobe ACD15PRO-T Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti