Aastra DT690 Quick Reference Manual

Cover Page Graphic

Place the graphic directly on the page, do not care

about putting it in the text flow. Select Graphics >

Properties and make the following settings:

• Width: 15,4 cm (Important!)

• Height: 11,2 cm (May be smaller)

• Top: 5,3 cm (Important!)

• Left: -0,3 cm (Important!)

This text should then be hidden.

DT690 Cordless Phone

for MX-ONE

™

Quick Reference Guide

DT690_QRG_MX-ONE.book Page 1 Thursday, April 30, 2009 4:28 PM

LZT 103 081 R2A

DT690_QRG_MX-ONE.book Page 2 Thursday, April 30, 2009 4:28 PM

MX-ONE – DT690

English ....................................................................................7

Dansk ...................................................................................17

Deutsch ...............................................................................27

Español ................................................................................39

Español de América Latina ...........................................51

Français ...............................................................................63

Italiano ................................................................................75

Nederlands ........................................................................87

Norsk .................................................................................... 99

Português .........................................................................109

Português do Brasil .......................................................121

Русский .............................................................................133

Suomi .................................................................................145

Svenska .............................................................................155

DT690_QRG_MX-ONE.book Page 3 Thursday, April 30, 2009 4:28 PM

MX-ONE – DT690

DT690_QRG_MX-ONE.book Page 4 Thursday, April 30, 2009 4:28 PM

5

FCC Statement

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

Part 15 of the FCC rules.

These limits are designed to provide reasonable protec-

tion against harmful interference in a residential installa-

tion. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is

no guarantee that interference will not occur in a partic-

ular installation. If this equipment does cause harmful

interference to radio or television reception, which can

be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit dif-

ferent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV techni-

cian for help.

--------------------------------------------------------------

Privacy of communications may not be ensured when

using this phone.

This equipment complies with FCC radiation exposure

limits set forth for an uncontrolled environment. This

device complies with FCC SAR limit of 1.6 W/kg. The high-

est SAR value measured when used at the ear is

0.104 W/kg. This device must not be colocated or operat-

ing in conjunction with any other antenna or transmitter.

• This equipment complies with Part 68 of the FCC rules

and the requirements adopted by the ACTA. On the rear

side, underneath the battery of this equipment is a label

that contains, among other information, a product iden-

tifier in the format US:AAAEQ##TXXXX. If requested, this

number must be provided to the telephone company.

• REN is N/A as this product is intended to be connected

behind a FCC Part 68 compliant PBX system. It is not

intended for direct connection to telephone network.

• If this equipment cause harm to the telephone net-

work, the telephone company will notify you in advance

that temporary discontinuance of service may be

required. But if advance notice isn't practical, the tele-

phone company will notify the customer as soon as pos-

sible. Also, you will be advised of your right to file a com-

plaint with the FCC if you believe it is necessary.

• The telephone company may make changes in its facil-

ities, equipment, operations or procedures that could

affect the operation of the equipment. If this happens,

the telephone company will provide advance notice in

order for you to make necessary modifications to main-

tain uninterrupted service.

• If trouble is experienced with this equipment, for repair

or warranty information, please contact your Aastra

business partner http://www.aastra.com.

This equipment is not intended to be repaired by the

customer (user). If the equipment is causing harm to the

telephone network, the telephone company may

request that you disconnect the equipment until the

problem is resolved.

• Connection to party line service is subject to state tar-

iffs. Contact the state public utility commission, public

service commission or corporation commission for infor-

mation.

• If your home has specially wired alarm equipment con-

nected to the telephone line, ensure the installation of

this equipment that it does not disable your alarm

equipment. If you have questions about what will disa-

ble alarm equipment, consult your telephone company

or qualified installer.

Electrical Safety Advisory

Electrical surges, typically lightning transients, are very

destructive to customer terminal equipment connected

to AC power sources. Customer is thus recommended to

use a surge arrestor for the equipment that requires

AC power.

DT690_QRG_MX-ONE.book Page 5 Thursday, April 30, 2009 4:28 PM

DT690_QRG_MX-ONE.book Page 6 Thursday, April 30, 2009 4:28 PM

7MX-ONE – DT690

English

Important User Information

Copyright

No parts of this publication may be reproduced, stored

in retrieval systems, or transmitted in any form or by any

means, electronic, mechanical, photocopying, recording

or otherwise, without prior written permission of the

publisher except in accordance with the following terms.

When this publication is made available on Aastra

media, Aastra gives its consent to downloading and

printing copies of the content provided in this file only

for private use and not for redistribution. No parts of this

publication may be subject to alteration, modification or

commercial use. Aastra will not be liable for any

damages arising from use of an illegal modified or

altered publication.

Aastra is a registered trademark of Aastra Technologies

Limited. All other trademarks mentioned herein are the

property of their respective owners.

Warranty

AASTRA MAKES NO WARRANTY OF ANY KIND WITH

REGARD TO THIS MATERIAL, INCLUDING, BUT NOT

LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE. Aastra shall not be liable for errors contained

herein nor for incidental or consequential damages in

connection with the furnishing, performance or use of

this material.

Declaration of Conformity

Hereby, Aastra Telecom Sweden AB, SE-126 37 Hägersten,

declares that this telephone, is in conformity with the

essential requirements and other relevant pros of the

European R&TTE directive 1999/5/EC.

Details to be found at: http://www.aastra.com

Safety Instructions

Note: When using your telephone or connected

equipment, the following basic safety precautions

should always be followed to reduce risk of fire,

electrical shock and other personal injury.

Recommendations

• Always keep and handle your products with care

and keep them in a clean and dust-free place.

Proper use and care will prolong the products life.

Use a soft absorbent tissue or cloth to remove dust,

dirt or moisture.

• Always ensure that the phone, battery and charger

are used and operated in the environment for

which they are designed.

• Operate the phone in temperatures between 0°C to

+40°C (32°F to 104°F).

• Do not expose your products to liquid,

moisture, humidity, solvents, strong

sunlight, harsh environments or

extreme temperatures, never above

+60°C (+140°F), unless the product has

been specifically designed and

officially approved for such environments.

• Exposure to heat may cause batteries

to leak, overheat or explode, resulting

in fire, burns or other injuries.

• Do not put the product in the micro-

wave oven: This may cause damage to

either the oven or the product.

• Do not attempt to disassemble or alter

any part of the phone, the charger(s) or

the battery-pack. Disassembly or

alteration may result in electrical shock

or irreversible damage to the equip-

ment.

Only a qualified service personnel

or an authorized Aastra partner should conduct

internal inspections, alterations and repairs.

• Do not expose your product to open flames or lit

tobacco products.

• Do not drop, throw or bend your products.

This may cause malfunction or electric shock.

• Do not paint your product.

• Do not use your product in an area where a

potentially explosive atmosphere exists, unless

the product has been specifically designed and

officially approved for such environments.

• To avoid hearing impairment, accept the call before

holding your product (or portable handsfree

device) to your ear.

DT690_QRG_MX-ONE.book Page 7 Thursday, April 30, 2009 4:28 PM

MX-ONE – DT6908

English

Disposal of the product

• Your product should not be placed in

municipal waste. Please check local

regulations for disposal of electronic

products.

Power supply

• Connect the AC power adapter of the charging unit

only to the designated power sources as marked on

the charger.

• Make sure the AC power supply is positioned so

that it will not be subjected to damage or stress.

• To reduce risk of electrical shock, unplug the

chargers from any power source before attempting

to clean or move it.

• The AC power adapters must not be used outdoors

or in damp areas.

• Never modify the cord or plug. If the plug will not fit

into the outlet, have a proper outlet installed by a

qualified electrician.

• Limit the distance between the mains socket and

the cordless phone when charging for easy

accessibility.

• As an energy saving measure, disconnect the

charger from the main socket after charging.

• When unplugging the mains adapter from the

power outlet, make sure that your hands are dry

and ensure that you hold the solid portion of the

mains adapter.

• Do not pull on cables.

• See the complete User Guide for available power

adapters.

Charging and batteries

• Please read carefully the following

important precautions before the first

time use of the batteries. Make sure to

understand and observe all cautionary

instructions stated, so as to avoid any

possible safety hazards that are

caused by any misuse, misapplication or damage

to batteries.

• Only use batteries, mains adapters or desk and rack

chargers which have been specifically designed for

use with your product.

• Use of power sources not explicitly recommend-

ed may lead to overheating, reduced battery per-

formance, distortion of the equipment and fire or

other damages.

• The phone is equipped with Lithium Li-polymer/

Li-Ion battery. In a complex infrastructure, the talk-

and standby time may differ, due to the con-

sequence of the increase in signaling.

• The battery must always be completely charged

(minimal 4 hours) before first time use.

• The battery in your product is designed to withstand

many charge cycles.

• Use only the recommended charging equipment.

• Improper charging can cause heat damage or even

high pressure rupture.

• Observe proper charging polarity.

• Do not solder lead wires directly onto the battery.

• Do not allow water to come into contact with the

battery.

• The battery is replaceable, however it is not the

intention to do this frequently.

• Only charge the battery when placed in the phone.

• Use only the specified battery-packs for your

product.

• Never heat or dispose of the battery into a fire,

which, or else, may cause leakage, burst or fire.

• Remove the carrying case from the product while in

charger.

• Do not cover the product while being charged.

Do not charge the phone in a closed cabinet or

drawer. The charging of the battery is a chemical

process and causes the battery to become warm

during charging. Make sure the environment in

which the phone is charged, is well vented.

• The cordless phone can be charged either when

switched on or off.

• Do not connect the battery's positive and negative

leads altogether in any circumstances.

• Do not strike or drop the battery. It may cause

damage to the battery.

• Do not charge the battery below +5°C

(+41°F). Be sure to charge the battery

between +5°C and +40°C (+41°F and

104°F). Charging beyond these

conditions may impair the battery

performance and shorten the life cycle.

• Do not use battery packs from different types,

brands or of different capacities.

• The battery is to be stored in a dry cool place, with

the ambient temperature of approx. +25°C (+77°F)

for best performance.

• The battery continues to discharge a minimal

portion of its power, even if the product is switched

off or the battery is removed.

• Dispose the battery in accordance with all local

regulations, applicable in your country.

DT690_QRG_MX-ONE.book Page 8 Thursday, April 30, 2009 4:28 PM

9MX-ONE – DT690

English

Warnings

Smoke or fumes

• Stop operating the products and turn

off immediately in case of smoke or

fumes. Unplug the mains adapter and

remove the batteries from the phone immediately.

Continued operation may result in fire or electrical

shock.

LCD

• If the liquid crystal display breaks, avoid injury by

not allowing the liquid crystal to come into contact

with eyes, skin or mouth. Prevent the liquid crystal

from leaking out of the broken glass.

Preventing malfunction

• Never place the equipment in close proximity

of electric motors, welding equipment or other

devices generating strong (electro) magnetic fields.

Exposure to strong (electro) magnetic fields may

cause malfunction and corrupt the communica-

tion.

• Moving the equipment rapidly between warm and

cold temperatures may cause condensation (wa-

ter droplets) to form on its internal and external

surfaces. Water droplets may cause malfunction of

the equipment and corrupt or end communication

or damage the equipment. When condensation is

noticed, stop using the equipment. Switch off the

phone, remove the battery and unplug the mains

adapter from the power outlet. Wait until the

moisture evaporates from the equipment before

putting it in operation again.

• Avoid accidental drop of the phone. Use the clip,

security clip or carrying case specified for carrying

purposes of the phone.

• Avoid squeezing the phone between furniture and

your body when carrying the phone in your pocket

or attached to clothing.

DT690_QRG_MX-ONE.book Page 9 Thursday, April 30, 2009 4:28 PM

MX-ONE – DT69010

English

DT690_QRG_MX-ONE.book Page 10 Thursday, April 30, 2009 4:28 PM

11MX-ONE – DT690

English

DT690 Cordless Phone

Quick Reference Guide

Main Display Menu

Note: Information displayed can vary depending on version and

configuration of the exchange, or whether the phone is used in a

DECT or an IP DECT system. Consult your system administrator to

find out which type of system your phone is used in.

This Quick Reference Guide includes short descriptions

on how to use the basic features. More features and

technical requirements are available in the User Guide.

The complete User Guide is available in electronic format

on the Enterprise Telephone Toolbox CD and on

www.aastra.com (see MX-ONE platform).

Read the safety instructions before use!

1 Multifunction button (can be programmed

as a short cut to functions)

2 Speaker volume up key

3 Speaker volume down key

4 Headset connector

5Left soft key

6Middle soft key

7Right soft key

8 Off-hook key

9Five-way navigation key

10 On-hook and power on or off

11 Voice mail access

12 Key lock and Upper/Lower case

13 Space

14 Mute key

15 Indicator

16 Display

When you press the soft key Menu, the Messaging tab is marked by

default.

1 Connections

2 Calls

3Short cuts

4My favourites

5Messaging

6Settings

7Profiles

8Contacts

DT690_QRG_MX-ONE.book Page 11 Thursday, April 30, 2009 4:28 PM

DT690 Cordless Phone Quick Reference Guide

MX-ONE – DT690

12

English

Switch On and Off

Switch on: Press and hold (Until display

lights up)

Ye s (confirm)

Switch off: Press and hold

Ye s (confirm)

Free seating

Log on: *11* Authorization code *

Own extension number

#

Note: Free seating is not supported by IP

DECT.

Log off: #11#

Answer Calls

Answer: Press

Handsfree: Press

Headset: Press the answering button on the

headset.

Call pick-up: Call ringing extension

8

France and New Zealand: Press 4;

Sweden: Press

6

Group call pick-up:

* 8 #

Finland and Sweden: Press *0#;

U.S.A. and Canada: Press

*59#

End call: Press

Reject call: Press

Make Calls

Dial: Dial extension number or external

line and number

Handsfree: Dial number

Common speed

dialing number:

Dial common speed dialing

number

Dial by contact: Press Menu - Contacts - Call

contact, select contact

Or

Press and hold first character of

name, select name

Note: Contacts marked with cannot be

modified.

Search and dial a

contact:

Press Menu - Contacts - Central

phonebook- Search by name (or

Search by number), enter name

(or number) and press Search.

Select contact

Dial by call list: Press select number

Redial last

external number:

***

Finland and Sweden: Press **0

Dial from a

text message:

Press Menu - Messaging - Inbox

Select a text message and press

View - More - Call no. in text (or

Call sender)

Silent Ringing and Mute

Mute ringing

telephone:

Press to suppress the

ringing. (Press to answer.)

Switch ring

signal off: Press and hold

Mute microphone

during call: Press and hold during call

Make Calls

DT690_QRG_MX-ONE.book Page 12 Thursday, April 30, 2009 4:28 PM

13

MX-ONE – DT690

DT690 Cordless Phone Quick Reference Guide

English

Volume

Adjust speaker

volume during a call:

Press the volume up button on the

side of the phone to increase.

Press the volume down button on

the side of the phone to decrease.

Adjust ringing

volume:

Press Menu - Settings - Sound &

Alerts - Volume and adjust with

navigation keys.

Callback

(The busy number calls back when free.)

Order: Press More - Callback

If the function cannot be activated on your

phone by pressing More, press

6 instead.

France, New Zealand and Sweden: Press

5

Cancel all

callbacks:

#37#

U.S.A. and Canada: Press #6#

Cancel single

callback:

#37* extension number #

U.S.A. and Canada: Press #6*

Call Waiting

(A call waiting signal is sent to the busy number.)

Order: Press More - Call waiting

(Close menu but keep phone off hook.)

If the function cannot be activated on your

phone by pressing More, press

5 instead.

France and New Zealand: Press

6;

Sweden: Press

4

(Call Waiting signal is indicated during an ongoing call.)

Answer: Press soft key

R (ongoing call is put

on hold)

Or

Press

Intrusion

(Intrude a busy extension to ask the party to hang up.)

Activate: Press

4

France, New Zealand and Sweden: Press 8

Bypass

(Bypass Follow-me on a specific extension.)

Activate:

*60* desired number #

U.S.A. and Canada: Press *1*

Park a Call

Inquiry

(The first call is parked automaically.)

Ongoing

conversation:

Press More - New call,

dial number

If the function cannot be activated on your

phone by pressing More, press soft key

R instead and dial number.

Refer back: Press More - Switch

If the function cannot be activated on your

phone by pressing More, press

2 instead.

Sweden: Press

R

On hold

Put on hold: Press

R

Resume a call: (within 30 sec)

Resume a call on

another extension:

Call the extension where call was

put on hold. Press

8

France and New Zealand: Press 4;

Sweden: Press

6

Conference

Ongoing

conversation:

Press More - New call,

dial number

At answer, press More -

Conference

Repeat to add more.

If the function cannot be activated on your

phone by pressing More, do the following:

Press soft key

R, dial number, and press 3

at answer.

U.S.A. and Canada: Press

4

DT690_QRG_MX-ONE.book Page 13 Thursday, April 30, 2009 4:28 PM

DT690 Cordless Phone Quick Reference Guide

MX-ONE – DT690

14

English

Transfer

Ongoing

conversation:

Press More - New call,

dial number

Before or after answer, press

More - Transfer

If the function cannot be activated on your

phone by pressing More, press

R, dial

number, and press

before or after

answer.

Blind transfer: Press More - Transf. to new

dial number

Transfer from

Bluetooth headset

to phone:

Press More - Audio Transfer

Note: Bluetooth is optional, see the User

Guide for more information.

Call Forwarding

Internal Follow-me

Order from your

extension:

*21* New extension number

#

U.K.: Press *2*

Cancel:

# 21#

U.K.: Press #2#

External Follow-me

Order:

*22# External line code and

number

#

U.S.A. and Canada: Press *23#

Cancel:

#22#

U.S.A. and Canada: Press #23#

Personal Number

Order or

change to another

profile from

own extension:

*10*(1-5)#

Search profile digits (1-5), are programmed

by system administrator.

Cancel: #10#

Voice Mail (Optional)

New voice mail

message received:

A new voice mail message is

indicated in the status bar by the

icon and a pop-up dialog box

where you can select Ye s or No.

Press Ye s to open the mailbox.

A new message is displayed. Press

Call to listen to the voice mail

message, or press Close to close

the mailbox.

Press No to open the mailbox later.

Enter the mailbox: Press Menu - Messaging - Inbox

Or

Press and hold

1

Note: Press and hold 1 requires that a voice

mail number has been configured to the

Voice Mail button. Please contact your

system administrator.

SMS (Optional)

(You can send and receive text messages to and from

other phones in the system.)

New text message:

Read message: Press Ye s to read it directly.

Press No to read it later.

Write and send

message:

Press Menu - Messaging - Write

new Message. Write the message,

and press Send. Enter the number

and press Send.

DT690_QRG_MX-ONE.book Page 14 Thursday, April 30, 2009 4:28 PM

15

MX-ONE – DT690

DT690 Cordless Phone Quick Reference Guide

English

Contacts

Add contact: Press Menu - Contacts - Add

contact - From call list, select a

contact and press Add.

Or

Press Menu - Contacts - Add

contact - New - Add. Enter

contact details and press OK after

each detail. Press Save.

Edit contact: Press Menu - Contacts - Edit

contact. Select contact and press

Edit, edit the contact and press OK,

then Save.

Delete contact: Press Menu - Contacts - Delete

contact. Select contact and press

Delete, then Ye s to confirm.

Account Code

Activate: *61* account code #

external number

Norway and Finland: Press *71*

Absence Information

Order: *23* absence code (0-9)

Enter time or date (if requested)

#

U.S.A. and Canada: Press *24*

Cancel:

#23#

U.S.A. and Canada: Press #24#

General Deactivation

Cancel all

features:

# 001 #

U.S.A. and Canada: Press *0#

Display Language

Change display

language:

Press Menu - Settings -

Language and select one of the

languages from the list.

Time and Date

Set time format: Press Menu - Settings - Time &

Date - Time format and select the

desired option.

Set date format: Press Menu - Settings - Time &

Date - Date format and select the

desired option.

Program Soft Keys and Hot Keys

Soft keys: Press Menu - Short cuts - Soft

keys.

Choose Left, Middle or Right and

press Select.

Select Name enter the name and

press OK.

Select Function, choose a function

and press Back.

Select Value (only for some

functions).

Select Control question.

Hot keys: Press Menu - Short cuts - Hot

keys.

Select a number from the list.

Select a Function.

Select Control question.

Navigation keys: Press Menu - Short cuts -

Navigation keys.

Select Up, Down, Left or Right

and press Select.

Select Function, choose a function

and press Select and then Back.

Select Value (only for some

functions).

Select Control question.

Multifunction

button:

Press Menu - Short cuts -

Multifunction button.

Select Long Press or Multi press.

Select a Function.

Select Control question.

DT690_QRG_MX-ONE.book Page 15 Thursday, April 30, 2009 4:28 PM

DT690 Cordless Phone Quick Reference Guide

MX-ONE – DT690

16

English

Profiles

Add profile: Press Menu - Profiles - Add new.

Enter profile name and press Save.

Make the desired settings and press

Back to confirm each setting.

Delete profile: Press Menu - Profiles.

Select the profile to delete and

press More - Delete - Yes.

Favourites

Add favorite: Press Menu - My favourites - Edit

favourites. Select a menu by

pressing Change. Repeat to add

more. Press Back to confirm.

Bluetooth (Optional)

Enable Bluetooth: Press Menu - Connections. Select

Bluetooth, and then Enable.

Disable Bluetooth: Press Menu - Connections. Select

Bluetooth, and then Disable.

Connect Bluetooth

headset:

Press Menu - Connections. Select

Bluetooth, and press Select.

Select Headset and press Select.

Select Add new and press Select

and then OK. Press Pair, enter the

Bluetooth headset PIN code and

press OK to confirm.

Charging the Battery

To charge the battery, place the phone in a desk charger

or a rack charger.

Note: An orange light indicates that the phone battery is being charged. The

light turns green and is displayed to indicate that the battery is fully

charged.

Replacing the Battery

To replace the battery, do the following:

1. Switch off the phone and open the battery

compartment.

2. Remove the battery attached to the lid, and replace

with a new battery.

Accessories

The following accessories are available:

Also available:

• Headset with microphone integrated in cable

•Security string

•Rack charger

• Battery pack rack charger

Carry case

with belt clip

Swivel clip

Headset with

microphone on boom

Standard clips Desk chargerDesk PDM charger

DT690_QRG_MX-ONE.book Page 16 Thursday, April 30, 2009 4:28 PM

17MX-ONE – DT690

Dansk

Vigtige brugeroplysninger

Ophavsret

forbeholdes.

Ingen del af denne publikation må gengives, gemmes

i et system, hvorfra den kan hentes frem, eller i nogen

form eller på nogen måde overføres elektronisk, meka-

nisk, ved fotokopiering, optagelse eller på anden måde,

uden forudgående skriftlig tilladelse fra udgiveren.

Når denne publikation gøres tilgængelig på Aastras

medie, har Aastra givet tilladelse til at downloade og

udskrive kopier af indholdet af denne fil, såfremt dette

kun er til privat brug og ikke gøres til genstand for

videredistribution. Ingen del af denne publikation må

ændres, tilpasses eller gøres til genstand for erhvervs-

mæssig brug. Aastra kan ikke drages til ansvar for skader,

som måtte opstå som følge af en ulovligt tilpasset eller

ændret publikation.

Aastra er et registreret varemærke tilhørende Aastra

Technologies Limited. Alle andre varemærker, der

nævnes her, tilhører deres respektive ejere.

Garanti

AASTRA GIVER INGEN GARANTI AF NOGEN ART FOR

DETTE MATERIALE, HERUNDER, MEN IKKE BEGRÆNSET

TIL, UNDERFORSTÅEDE GARANTIER VEDRØRENDE

SALGBARHED OG EGNETHED TIL ET BESTEMT FORMÅL.

Aastra er ikke ansvarlig for fejl i dette dokument eller for

tilfældig beskadigelse eller følgeskader i forbindelse med

leveringen eller anvendelse af dette materiale.

Overensstemmelseserklæring

Aastra Telecom Sweden AB, SE-126 37 Hägersten

erklærer hermed, at denne telefon er i overensstem-

melse med de essentielle krav og andre relevante

bestemmelser i henhold til direktiv 1999/5/EØF.

Du kan få yderligere oplysninger på:

http://www.aastra.com

Sikkerhedsinstruktioner

Bemærk: Ved brug af telefonen eller tilsluttet udstyr

skal de grundlæggende sikkerhedsforskrifter altid

overholdes for at nedsætte risikoen for brand, elektrisk

stød og anden personskade.

Anbefalinger

• Sørg altid for at opbevare og håndtere dine

produkter omhyggeligt og opbevare dem et rent

og støvfrit sted. Korrekt anvendelse af produktet

forlænger dets levetid. Anvend et blødt absorbe-

rende materiale til at fjerne støv, snavs eller fugt.

• Sørg for, at telefonen, batteriet og opladeren

anvendes og betjenes i de omgivelser, de er

beregnet til.

• Anvend telefonen i temperaturområder mellem

0°C til +40°C.

• Undlad at udsætte produkterne for

væske, fugt, fugtighed, opløsnings-

midler, strækt sollys, barske miljøer

eller ekstreme temperaturer, aldrig

over + 60 °C, med mindre produktet er

specifikt designet og officielt godkendt

til brug i sådanne miljøer.

• Varmeudsættelse kan få batterierne til

at lække, overopvarme eller eksplodere,

hvilket kan resultere i brand, forbræn-

dinger eller andre skader.

• Produktet må ikke anbringes i mi-

krobølgeovn: Dette kan forårsage skade på enten

ovn eller produkt.

• Forsøg ikke at adskille eller ændre dele

af telefonen, oplader(e) eller batteri-

pakken. Adskillelse eller ændring kan

resultere i elektrisk stød eller uoprettelig

skade på udstyret.

Interne eftersyn,

ændringer eller reparationer må kun

udføres af kvalificerede serviceteknikere eller en

autoriseret Aastra-partner.

• Produktet må ikke udsættes for åben ild eller

tændte tobaksprodukter.

• Produkterne må ikke tabes, kastes eller bøjes. Dette

kan forårsage fejl på produktet eller elektrisk stød.

• Produktet må ikke males.

• Undlad at bruge produktet i områder med en

potentielt eksplosiv atmosfære, med mindre

produktet er specifikt designet og officielt

godkendt til brug i sådanne miljøer.

• Besvar et opkald, før produktet (eller den bærbar

håndfri enhed) holdes op mod øret for at undgå

høreskade.

DT690_QRG_MX-ONE.book Page 17 Thursday, April 30, 2009 4:28 PM

MX-ONE – DT69018

Dansk

Bortskaffelse af produktet

• Produktet må ikke efterlades på kom-

munale affaldspladser. Vi beder dig

undersøge lokale regler for bortskaffelse

af elektroniske produkter.

Strømforsyning

• Slut kun opladerens AC-strømadapter til den

udpegede strømkilde som markeret på opladeren.

• Sørg for, at AC-strømforsyningen er placeret, så den

ikke beskadiges eller udsættes for belastning.

• For at nedsætte risikoen for overbelastning eller

elektrisk stød skal opladere afbrydes fra alle

strømkilder, før de rengøres eller flyttes.

• AC-strømadaptere må ikke bruges udenfor eller i

fugtige områder.

• Ledningen eller stikket må aldrig modificeres. Hvis

stikket ikke passer i stikkontakten, skal der instal-

leres en passende stikudgang af en kvalificeret

elektriker.

• Afstanden mellem stikkontakten og den trådløse

telefonen skal begrænses for at sikre bedre

tilgængelighed ved opladning.

• Afbryd opladeren fra strømnettet efter endt

opladning for at spare strøm.

• Når netadapteren afbrydes fra stikket, skal du sikre

dig, at dine hænder er tørre, og at du tager fat i den

faste del af strømadapteren.

• Træk ikke i kablerne.

• Der henvises til den komplette brugervejledning i

forbindelse med oplysninger om tilgængelige

strømadaptere.

Opladning og batterier

• Læs følgende vigtige forskrifter om-

hyggeligt, før batterierne tages i brug

første gang. Sørg for, at du forstår og

overholder alle angivne sikkerheds-

instruktioner for at undgå eventuelle

sikkerhedsrisici, som skyldes misbrug,

forkert anvendelse eller beskadigelse af batterier.

• Anvend kun batterier, netadaptere eller opladere,

som er specifikt beregnet til brug med produktet.

• Anvendelse af strømkilder, som ikke udtrykkeligt

anbefales, kan resultere i overophedning, nedsat

batteriydeevne, forvrængning af udstyr samt brand

eller andre skader.

• Telefonen er udstyret med Lithium Li-polymer/

Li-Ion-batteri. I komplekse infrastrukturer kan tale-

og standbytider variere som en konsekvens af den

forøgede signallering.

• Batteriet skal altid være helt opladet (mindst

4 timer), før det tages i brug første gang.

• Batteriet i produktet er beregnet til at kunne

oplades mange gange.

• Anvend kun anbefalet opladningsudstyr.

• Forkert opladning kan forårsage varmeskade eller

endda trykbrud.

• Overhold korrekt opladningspolaritet.

• Undlad at lodde strømledninger direkte på

batteriet.

• Lad ikke vand komme i kontakt med batteriet.

• Batteriet kan udskiftes, men dette skal dog ikke

gøres særligt ofte.

• Oplad kun batteriet, når det er placeret i telefonen.

• Anvend kun de batteripakker, der er specificeret for

produktet.

• Opvarm aldrig batteriet eller bortskaf det med brug

af ild eller på anden måde, som kan forårsage

lækage, brud eller brand.

• Fjern etuiet fra produktet, når det oplades.

• Tildæk ikke produktet, mens det opvarmes. Oplad

ikke produktet i et lukket skab eller en skuffe.

Opladningen af batteriet er en kemisk proces, som

opvarmer bateriet under opladning. Sørg for, at de

omgivelser, hvor telefonen oplades, er godt

ventilerede.

• Den trådløse telefon kan oplades i både slukket og

tændt tilstand.

• Sæt ikke under nogen omstændigheder batteriets

positive og negative ledninger sammen.

• Slå ikke på batteriet eller tab det. Dette kan

forårsage skade på batteriet.

• Oplad ikke batteriet under + 5 °C. Sørg

for at oplade batteriet mellem + 5 °C og

+ 40 °C. Opladning under andre

forhold kan forringe batteriets ydeevne

og forkorte levetiden.

• Anvend ikke batteripakker af andre typer, mærker

eller med en anden kapacitet.

• Batteriet skal opbevares på et tørt og køligt sted

med en omgivelsestemperatur på ca. + 25 °C for at

sikre optimal ydeevne.

• Batteriet aflades fortsat en anelse, selvom

produktet er slukket eller batteriet er fjernet.

• Bortskaf batteriet i overensstemmelse med alle

lokale bestemmer, der gælder i dit pågældende

land.

DT690_QRG_MX-ONE.book Page 18 Thursday, April 30, 2009 4:28 PM

19MX-ONE – DT690

Dansk

Advarsler

Røg eller dampe

• Stop betjeningen af og sluk øjeblikkeligt

produktet i tilfælde af røg eller dampe.

Afbryd forbindelse til netadapter og

fjern med det samme batterierne fra telefonen.

Fortsat betjening kan resultere i brand eller

elektrisk stød.

LCD

• Hvis displayet af flydende krystal går i stykker,

må det flydende krystalmateriale ikke komme i

kontakt med øjne, hud eller mund for at undgå

skade. Undgå, at flydende krystal lækker fra det

knuste glas.

Forhindring af fejl

• Anbring aldrig udtyret i nærheden af elmotorer,

svejseudstyr eller anre enheder, der genererer

og udsender strærke (elektro)-magnetiske felter.

Udsættelse for stærke (elektro)-magnetiske felter

kan forårsage fejl og afbryde kommunikationen.

• Hvis udstyret flyttes hurtigt mellem varme og kolde

temperaturer, kan der dannes kondensering (små

vanddråber) på interne og eksterne flader. Små

vanddråber kan forårsage fejl på udstyret og

ødelægge kommunikationen eller beskadige

udstyret. Hvis der bemærkes kondensering, skal

brug af udstyret indstilles. Sluk for telefonen, fjern

batteriet og afbryd forbindelsen til netadapter fra

kontakten. Ventil, indtil fugten fordamper fra

udstyret, før det tages i brug igen.

• Undgå at tabe telefonen. Brug klipsen eller

bæreetuiet til at bære telefonen.

• Undgå at telefonen kommer i klemme mellem

møbler og dig selv, når du opbevarer telefonen

i lommen eller har sat den på dit tøj.

DT690_QRG_MX-ONE.book Page 19 Thursday, April 30, 2009 4:28 PM

MX-ONE – DT69020

Dansk

DT690_QRG_MX-ONE.book Page 20 Thursday, April 30, 2009 4:28 PM

La pagina sta caricando ...

Aastra DT690 Quick Reference Manual

Aastra DT690 Quick Reference Manual

in altre lingue

Documenti correlati

Altri documenti