Gateway E-1600 System Manual

Gateway

™

E-1600 Desktop

System Manual

January 2001

8506999.book Page i Friday, December 15, 2000 8:22 AM

Notices

4545 Town Centre Court

San Diego, CA 92121 USA

This publication is protected by copyright and all rights are reserved. No part of it may be reproduced or

transmitted by any means or in any form, without prior consent in writing from Gateway.

The information in this manual has been carefully checked and is believed to be accurate. However, changes

are made periodically. These changes are incorporated in newer publication editions. Gateway may improve

and/or change products described in this publication at any time. Due to continuing system improvements,

Gateway is not responsible for inaccurate information which may appear in this manual. For the latest product

updates, consult the Gateway Web site at www.gateway.com. In no event will Gateway be liable for direct, indirect,

special, exemplary, incidental, or consequential damages resulting from any defect or omission in this manual,

even if advised of the possibility of such damages.

In the interest of continued product development, Gateway reserves the right to make improvements in this manual

and the products it describes at any time, without notices or obligation.

Trademark acknowledgments

AnyKey, black-and-white spot design, CrystalScan, Destination, EZ Pad, EZ Point, Field Mouse, Solo, TelePath,

Vivitron, stylized “G” design, and “You’ve got a friend in the business” slogan are registered trademarks and

GATEWAY, Gateway Profile, Gateway Solo, Gateway Astro, green stylized GATEWAY, green stylized Gateway

logo, and the black-and-white spotted box logo are trademarks of Gateway, Inc. Intel, Intel Inside logo, and

Pentium are registered trademarks and MMX is a trademark of Intel Corporation. Microsoft, MS, MS-DOS, and

Windows are trademarks or registered trademarks of Microsoft Corporation. All other product names mentioned

herein are used for identification purposes only, and may be the trademarks or registered trademarks of their

respective companies.

8506999.book Page ii Friday, December 15, 2000 8:22 AM

i

Contents

Preface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v

Conventions used in this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v

Getting additional information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi

1 System Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Standard features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Back panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Vertical desktop feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

System board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Heceta IV hardware management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2 System Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Setting up your computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Starting your computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Understanding the Power-On Self-Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Setting up the operating system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Turning off your computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Restarting your computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3 Case Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Static electricity precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Opening the case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Removing the cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Removing the bezel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Closing the case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Replacing the bezel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Replacing the cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

4 Replacing and Adding System Components . . . . . . . . . . . . . . . . . . . 21

Replacing or adding drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Preparing to replace or add a drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Drive cabling information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Replacing the CD drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Replacing the 3.5-inch diskette drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Adding a 3.5-inch device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Replacing the hard drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Replacing or adding memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

8506999.book Page i Friday, December 15, 2000 8:22 AM

ii

Replacing the processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Adding or replacing expansion cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Replacing the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Replacing the system board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Replacing the power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

5 Using the BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

About the BIOS Setup utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Updating the BIOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Setting the BIOS configuration jumper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

6 Managing Your Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Protecting against power source problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Surge suppressors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Line conditioners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Uninterruptible power supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Maintaining and managing your hard drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Hard drive maintenance utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Hard drive management practices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Protecting your computer from viruses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Checking system health with LANDesk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

System recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Creating a startup diskette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Keeping a record of system configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Using your System Restoration CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

7 Cleaning Your Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Cleaning the mouse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Cleaning the keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Cleaning the monitor screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Cleaning the computer and monitor cases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

8 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Troubleshooting checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Verifying your configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Troubleshooting guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

Battery installation problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

CD drive problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

Computer problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

Diskette drive problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Hard drive problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

8506999.book Page ii Friday, December 15, 2000 8:22 AM

iii

Memory and processor problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Modem problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Peripheral/adapter problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Printer problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Video problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Error messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Beep codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

A Safety and Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

B Reference Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

System specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Mechanical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Environmental specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Electrical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

System I/O addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Memory map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Interrupts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

DMA usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

8506999.book Page iii Friday, December 15, 2000 8:22 AM

iv

8506999.book Page iv Friday, December 15, 2000 8:22 AM

Conventions used in this manual v

Preface

Conventions used in this manual

Throughout this manual, you will see the following conventions:

Convention Description

ENTER Keyboard key names are printed in small capitals.

C

TRL+ALT+DEL A plus sign means to press the keys at the same time.

Setup Commands to be entered, options to select, and messages that

appear on your monitor are printed in bold.

User’s Guide Names of publications are printed in italic.

Viewpoint All references to front, rear, left, or right on the computer are based

on the computer being in a normal, upright position, as viewed from

the front.

Important A note labeled important informs you of special

circumstances.

Caution A caution warns you of possible damage to equipment or

loss of data.

Warning A warning indicates the possibility of personal injury.

8506999.book Page v Friday, December 15, 2000 8:22 AM

vi

Getting additional information

Log on to the technical support area of www.gatewayatwork.com to find

information about your computer or other Gateway products. Some types of

information you can access are:

■ Hardware driver and program updates

■ Technical tips

■ Service agreement information

■ Technical documents and component information

■ Frequently asked questions (FAQs)

■ Documentation for peripherals or optional components

■ Online technical support

8506999.book Page vi Friday, December 15, 2000 8:22 AM

Standard features 1

1

System Features

Standard features

■ Intel

®

Celeron

™

or Intel Pentium

™

III processor

■ Desktop-to-tower conversion

■ Two dual in-line memory module (DIMM) sockets that support up to

512 megabytes (MB) of Synchronous Dynamic Random Access Memory

(SDRAM)

■ Integrated Heceta IV Hardware Management Application Specific

Integrated Circuit (ASIC)

■ Integrated video controller using main memory for video memory

■ Intel 810e chipset

■ Two PCI slots that support half-length, low-profile PCI expansion cards

■ One 3.5 inch diskette drive, one CD drive, and one hard drive

■ Keyboard port, mouse port, one serial port, parallel port, video port, Local

Area Network (LAN) port, two Universal Serial Bus (USB) ports, and

line-out and microphone-in audio ports

■ Integrated audio using Crystal CS4201 AC’97 on-board Codec with

analog speaker support

■ 10/100 Mbit per second Ethernet network support

8506999.book Page 1 Friday, December 15, 2000 8:22 AM

2 System Features

Front panel

Auxiliary drive bay provides space for a fourth drive that can be externally

accessible.

Power button turns the computer on and off.

CD drive plays data or audio CDs.

CD activity LED glows when the CD drive is reading a CD.

Emergency CD eject provides a way to eject a CD if the computer is off.

CD eject button ejects a CD from the CD drive.

Diskette eject button ejects a diskette from the diskette drive.

Diskette drive writes to and reads from 3.5-inch, 1.44 MB diskettes.

Diskette drive activity LED glows when the diskette drive reads from or

writes to a diskette.

Headphone jack lets you connect a set of headphones to the integrated audio

controller on the system board.

Optional USB port cover covers the optional front panel USB ports that let

you connect USB devices directly to the front panel.

Power LED glows green when the computer is on.

Emergency CD eject

Diskette drive

Diskette eject button

Power button

Diskette drive activity LED

C

D drive

Auxiliary drive bay cover

CD eject button

Optional USB port cover

CD activity LED

Headphone jack

Power LED

8506999.book Page 2 Friday, December 15, 2000 8:22 AM

Back panel 3

Back panel

Power connector connects the computer power cord. The other end of the

power cord plugs into an AC outlet or power strip.

Optional thumbscrew lock lets you lock the cover so that it cannot be

removed without a key.

Kensington lock slot lets you use a cable lock to secure the system.

Thumbscrew secures the cover to the chassis.

Parallel (printer or LPT) port connects a printer or other parallel device.

PCI slots (2) let you install as many as two low-profile PCI expansion cards.

Microphone-in jack connects a microphone.

RJ-45 LAN connector connects the network cable.

Serial (COM) port connects a serial device.

Video port connects the monitor interface cable.

Keyboard port connects a Personal System/2

®

(PS/2) compatible keyboard.

Voltage selector sets the voltage for your area, either 115V or 230V.

Mouse port connects a PS/2-compatible mouse.

Serial port

Keyboard port

Line-out

Microphone-in

Power connector

RJ-45 LAN connector

USB ports

Voltage selector

switch

Parallel (printer) port

Video port

Kensington lock slot

Thumbscrew

Mouse port

PCI slots (2)

Optional thumbscrew lock

8506999.book Page 3 Friday, December 15, 2000 8:22 AM

4 System Features

USB ports connect Plug-and-Play devices that are automatically configured

when they are plugged into the computer.

Line-out audio jack connects audio devices such as speakers.

8506999.book Page 4 Friday, December 15, 2000 8:22 AM

Vertical desktop feature 5

Vertical desktop feature

You can set up your desktop to sit vertically by using the stand included with

your accessory kit. This arrangement saves space and transforms your desktop

computer into a minitower computer.

To convert your computer to a tower

1 Turn off the computer and disconnect the power cord and all cables

connected to the back.

2 Lift the right side of the computer until it rests vertically on its left side.

3 Lift the front of the computer, rocking it back, and place the plastic stand

under the front of the computer.

4 Lower the front of the computer, allowing it to balance on the stand.

5 Reconnect the power cord and that cables you disconnected earlier.

Important If you set your system up vertically, make sure you use a

CD drive with retaining clips. Retaining clips hold the CD

in place when the computer is mounted vertically. The CD

drive that ships with the system includes retaining clips.

8506999.book Page 5 Friday, December 15, 2000 8:22 AM

6 System Features

System board

A PCI connectors

B Internal speaker connector (not used)

C CD audio connector

D Audio connectors

E Headphone connector

F Telephony connector

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

S

T

U

V

W

8506999.book Page 6 Friday, December 15, 2000 8:22 AM

Heceta IV hardware management 7

G

RJ-45 LAN connector

H Serial port

I Parallel port

J Video port

K Dual USB ports

L Keyboard and mouse ports

M Processor fan connector

N Processor socket

O DIMM slots

P Main power connector

Q Diskette drive connector

R Secondary IDE connector

S Primary IDE connector

T Front panel connector

U Battery

V Chassis intrusion connector

W BIOS configuration jumper (J6A1)

Heceta IV hardware management

Heceta IV is an integrated data acquisition system that lets you monitor the

status of your system hardware. Monitored information includes internal

temperature, fan speed, voltage, and chassis intrusion (to alert you in case of

tampering). The features of the hardware management system can be accessed

through LANDesk® Client Manager, which provides a quick system health

indicator.

8506999.book Page 7 Friday, December 15, 2000 8:22 AM

8 System Features

8506999.book Page 8 Friday, December 15, 2000 8:22 AM

Setting up your computer 9

2

System Setup

Setting up your computer

Use the instructions on the Quick Guide poster that came with your computer

to assemble your computer.

You should prepare a safe working environment before assembling your

computer by following these guidelines:

■ Use a clean, flat, and stable surface for your computer. Allow at least

6 inches at the rear of the computer for cabling and air circulation.

■ Obtain a grounded (three-prong) AC surge-protected power strip. A

surge-protected power strip helps protect against AC power fluctuations.

■ Protect your computer from extreme temperature and humidity. Do not

expose your computer to direct sunlight, heater ducts, or other

heat-generating objects.

■ Keep your computer away from equipment that generates magnetic

fields, such as unshielded stereo speakers. Even a telephone placed too

close to the computer may cause interference.

■ Plug the computer into a wall outlet or power strip that is easily

accessible.

Important Keep the computer boxes and packing material in case you

need to send the computer to Gateway for repairs. If you

return your computer in different packaging, your warranty

may be voided.

8506999.book Page 9 Friday, December 15, 2000 8:22 AM

10 System Setup

Starting your computer

Before you start your computer for the first time:

■ Make sure that the voltage selector switch on the back of the computer

is set to the correct voltage for your area. This switch is set at the factory

to the correct voltage (see “Back panel” on page 3 for the voltage selector

switch location).

■ Make sure all cables are firmly connected to the proper ports on the back

panel of the computer.

■ Make sure the computer and monitor are plugged into an AC outlet or

power strip and that the power strip is turned on.

To start the computer:

1 If you have connected the computer components to a power strip, make

sure all the computer components are turned off, then turn on the power

strip.

2 Turn on the monitor.

3 Turn on any other components connected to the computer, such as

speakers, a printer, or a scanner.

4 Turn on the computer.

If nothing happens when you turn on the computer:

■ Make sure that the power cables are securely plugged in and that

your power strip (if you are using one) is plugged in and turned on.

■ Make sure the monitor is connected to the computer, plugged into

the power strip or AC outlet, and turned on. You may also need

to adjust the brightness and contrast controls on the monitor.

Caution Make sure your computer and peripherals are turned off

and unplugged from the power outlet when you connect

peripherals to the computer, or you might damage the

computer or the peripherals.

8506999.book Page 10 Friday, December 15, 2000 8:22 AM

Starting your computer 11

Understanding the Power-On Self-Test

When you turn on your computer, the Power-On Self-Test (POST) routine

checks the computer memory and components. To see this information on

the screen, press T

AB during POST.

The computer displays error messages if POST finds any problems. Write down

any error messages that you see. If you continue to have problems, these error

messages may help technical support diagnose the cause.

Setting up the operating system

The first time you start your computer, the operating system takes a few

minutes to set up.

Refer to your operating system documentation for specific questions regarding

the operating system.

To complete the operating system setup for Windows NT:

1 After the computer starts, the start-up wizard opens. Continue by clicking

Next.

2 Type the requested information in the appropriate text boxes. When you

have finished typing the information, continue by clicking

Next.

3 Continue following the instructions and selecting options in the start-up

wizard dialog boxes, clicking

Next to move through the dialog boxes, until

the wizard tells you to restart the computer.

If you need to return to the previous dialog box to change any of your

entries, click

Back.

Important The computers starts very quickly. If your monitor requires

a short time to warm up, you may not see the messages.

If you are having problems, you may need to wait for the

monitor to warm up and then restart the computer. If you

are trying to enter Setup, press F1 before the monitor

warms up.

Important Any ID or key numbers requested to complete the

operating system setup are either on a sticker attached to

the computer or in the documentation provided.

8506999.book Page 11 Friday, December 15, 2000 8:22 AM

12 System Setup

4 Restart your computer. The setup is complete.

Turning off your computer

Every time you turn off your computer, shut down the operating system first.

You may lose data if you do not follow the proper procedure.

To turn off your computer in Windows NT:

1 Click Start, then select Shut down the computer?, then Shut Down.

2 Click OK. The computer turns off. If you see a message saying It is now

safe to turn off your computer

, turn off the computer by pressing the power

button.

3 Turn off the monitor and peripherals.

Important For other operating systems, such as Windows

®

2000,

refer to the appropriate operating system software manual

for setup instructions.

Warning When you turn the computer off by pressing the power

button, some electric current still flows through the

computer. Before opening the computer case or

connecting or removing any peripherals, turn off the

computer, then unplug the power cord and modem cable

(if installed) or you may get an electric shock.

Important For other operating systems, such as Windows

®

2000,

refer to the appropriate operating system software manual

for instructions.

8506999.book Page 12 Friday, December 15, 2000 8:22 AM

La pagina sta caricando ...

Gateway E-1600 System Manual

Gateway E-1600 System Manual

in altre lingue

Altri documenti