Yamaha DVD-S550 Manuale del proprietario

DVD PLAYER

LECTEUR DE DVD

DVD-S550

OWNER’S MANUAL

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

BRUKSANVISNING

GEBRUIKSAANWIJZING

G

DVD-S550

IP

YAMAHA ELECTRONICS CORPORATION, USA

6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD.

135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H.

SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A.

RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD.

YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND

YAMAHA SCANDINAVIA A.B.

J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY, LTD.

17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

Printed in Hungary

3139 246 13771

DIGITAL VIDEO

i

Important notes for users in the

U.K.

Mains plug

This apparatus is fitted with an approved 13

Amp plug. To change a fuse in this type of plug

proceed as follows:

1

Remove fuse cover and fuse.

2

Fix new fuse which should be a BS1362 5 Amp,

A.S.T.A. or BSI approved type.

3

Refit the fuse cover.

If the fitted plug is not suitable for your jack

outlets, it should be cut off and an appropriate

plug fitted in its place.

If the mains plug contains a fuse, this should

have a value of 5 Amp. If a plug without a fuse

is used, the fuse at the distribution board should

not be greater than 5 Amp.

Note: The severed plug must be disposed to avoid

a possible shock hazard should it be inserted into

a 13 Amp jack elsewhere.

How to connect a plug

The wires in the mains lead are coloured with

the following code: blue = neutral (N),

brown = live (L).

●

As these colours may not correspond with the

colour markings identifying the terminals in your

plug, proceed as follows:

– Connect the blue wire to the terminal

marked N or coloured black.

– Connect the brown wire to the terminal

marked L or coloured red.

– Do not connect either wire to the earth

terminal in the plug, marked E (or e) or

coloured green (or green and yellow).

Before replacing the plug cover, make certain

that the cord grip is clamped over the sheath of

the lead - not simply over the two wires.

Copyright in the U.K.

Recording and playback of material may require

consent. See Copyright Act 1956 and The

Performer’s Protection Acts 1958 to 1972.

VAROITUS

Muiden kuin tässä esitettyjen toimintojen säädön tai

asetusten muutto saattaa altistaa vaaralliselle säteilylle

tai muille vaarallisille toiminnoille.

DK

Advarsel: Usynlig laserstråling ved åbning når

sikkerhedsafbrydere er ude af funktion. Undgå

utsættelse for stråling.

Bemærk: Netafbryderen STANDBY/ON er

sekundært indkoblet og ofbryder ikke strømmen fra

nettet. Den indbyggede netdel er derfor tilsluttet til

lysnettet så længe netstikket sidder i stikkontakten.

N

Observer: Nettbryteren STANDBY/ON er sekundert

innkoplet. Den innebygdenetdelen er derfor ikke

frakoplet nettet så lenge apparatet er tilsluttet

nettkontakten.

S

Klass 1 laseraparat

Varning! Om apparaten används på annat sätt än i

denna bruksanvisning specificerats, kan användaren

utsättas för osynlig laserstrålning, som överskrider

gränsen för laserklass 1.

Observera! Strömbrytaren STANDBY/ON är

sekundärt kopplad och inte bryter inte strömmen från

nätet. Den inbyggda nätdelen är därför ansluten till

elnätet så länge stickproppen sitter i vägguttaget.

SF

Luokan 1 laserlaite

Varoitus! Laitteen käyttäminen muulla kuin tässä

käyttöohjeessa mainitulla tavalla saattaa altistaa

käyttäjän turvallisuusluokan 1 ylittävälle

näkymättömälle lasersäteilylle.

Oikeus muutoksiin varataan. Laite ei saa olla alttiina

tippu-ja roiskevedelle.

Toiminnanvalitsin STANDBY/ON on kytketty

toisiopuolelle, eikä se kytke laitetta irti sähköverkosta.

Sisäänrakennettu verkko-osa on kytkettynä

sähköverkkoon aina silloin, kun pistoke on

pistorasiassa.

VARO!

AVATTAESSA JA SUOJALUKITUS

OHITETTAESSA OLET ALTTIINA

NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE.

ÄLÄ KATSO SÄ TEESEEN.

VARNING

!

OSYNLIG LASERSTRÅLNING NÄR DENNA

DEL ÄR ÖPPNAD OCH SPÄRREN ÄR

URKOPPLAD. BETRAKTA EJ STRÅLEN.

ii

CAUTION

Use of controls or adjustments or performance

of procedures other than those specified herein

may result in hazardous radiation exposure.

ATTENTION

L’emploi de commandes, de réglages ou un

choix de procédures différents des

spécifications de cette brochure peut entraîner

une exposition à d’éventuelles radiations

pouvant être dangereses.

ACHTUNG

Die Verwendung von Bedienungselementen

oder Einstellungen oder die Durchführung von

Bedienungsvorgängen, die nicht in dieser

Anleitung aufgeführt sind, kann zu einem

Kontakt mit gefährlichen Laserstrahlen führen.

OBSERVERA

Användning av kontroller och justeringar eller

genomförande av procedurer andra än de som

specificeras i denna bok kan resultera i att du

utsätter dig för farlig strålning.

VOORZICHTIG

Gebruik van bedieningsorganen of instellingen,

of uitvoeren van handelingen anders dan staan

beschreven in deze handleiding kunnen leiden

tot blootstelling aan gevaarlijke stralen.

ПРЕДУПРЕЖДЕНИЕ

Использование органов управления или

настроек или выполнение процедур, отличных

от описанных в данном руководстве, могут

привести к опасному облучению.

INVISIBLE LASER RADIATION WHEN OPEN

DO NOT STARE INTO BEAM

CAUTION:

INVISIBLE LASER RADIATION WHEN OPEN

AVOID DIRECT EXPOSURE TO THE BEAM

DANGER:

The unit is not disconnected from the AC power source

as long as it is connected to the wall outlet, even if this unit

itself is turned off. This state is called the standby mode. In

this state, this unit is designed to consume a very small

quantity of power.

L’appareil n’est pas isolé de la source d’alimentation aussi

longtemps qu’il reste branché sur une prise murale, même

lorsqu’il est éteint. Il est alors dit en mode «Veille». Dans

ce mode, l’appareil consomme très peu de courant.

Das Gerät ist nicht vom Netz getrennt, solange der

Netzstecker noch mit der Wandsteckdose verbunden ist,

selbst wenn das Gerät ausgeschaltet wurde. Dieser

Betriebszustand wird als Bereitschaftsmodus bezeichnet. In

diesem Zustand nimmt das Gerät eine sehr geringe Menge

Strom auf.

Enheten är inte urkopplad från nätet så länge som den är

ansluten till vägguttaget även om enheten i sig självt är

avstängd. Detta kallas för beredskapsläge och i detta

tillstånd konsumerar apparaten minimalt med ström.

De stroomtoevoer naar het toestel is niet afgesloten

zolang de stekker nog in het stopcontact zit, zelfs niet als

het toestel zelf uitgeschakeld is. Deze toestand wordt

“standby” (waak- of paraatstand) genoemd. Het toestel is

ontworpen om in deze toestand.

Данное устройство не отсоединено от источника

переменного напряжения до тех пор, пока оно

подключено к настенной розетке, даже если само

данное устройство выключено. Это состояние

называется режимом готовности. В этом

состоянии данное устройство потребляет очень

малое количество электроэнергии.

CAUTION

VISIBLE AND INVISIBLE LASER RADIATION WHEN

OPEN. AVOID EXPOSURE TO BEAM.

ADVARSEL

SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING.

UNDGÅ UDSÆTTELSE FOR STRÅLING.

ADVARSEL

SYNLIG OG USYNLIG LASERSTRÅLING NÅR DEKSEL

ÅPNES. UNNGÅ EKSPONERING FOR STRÅLEN.

VARNING

SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR

DENNA DEL ÄR ÖPPNAD. BETRAKTA EJ STRÅLEN.

VARO!

AVATTAESSA OLET ALTTIINA NÄKYVÄLLE JA

NÄKYMÄTTÖMÄLLE LASER SÄ TEILYLLE. ÄLÄ KATSO

SÄTEESEEN.

VORSICHT

SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG

WENN ABDECKUNG GEÖFFNET. NICHT DEM

STRAHL AUSSETSEN.

DANGER

VISIBLE AND INVISIBLE LASER RADIATION WHEN

OPEN. AVOID DIRECT EXPOSURE TO BEAM.

ATTENTION

RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS

D’OUVERTURE. EXPOSITION DANGEREUSE AU

FAISCEAU.

ПРЕДУПРЕЖДЕНИЕ

ПРИ ОТКРЫТИИ УСТРОЙСТВА ВЫ МОЖЕТЕ

ПОДВЕРГНУТЬСЯ ВОЗДЕЙСТВИЮ ВИДИМОГО

И НЕВИДИМОГО ЛАЗЕРНОГО ИЗЛУЧЕНИЯ.

ИЗБЕГАЙТЕ ВОЗДЕЙСТВИЯ ЛУЧА.

iii

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

1

To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

2

Install this sound system in a well ventilated, cool,

dry, clean place — away from direct sunlight, heat

sources, vibration, dust, moisture, or cold. In a

cabinet, allow about 2.5cm (1 inch) of free space

all around this unit for adequate ventilation.

3

Locate this unit away from other electrical

appliances, motors, or transformers to avoid

humming sounds.

4

Do not expose this unit to sudden temperature

changes from cold to hot, nor locate this unit in

an environment with high humidity (i.e., a room

with a humidifier) to prevent condensation inside

this unit, which may cause an electrical shock, fire,

damage to this unit, and/or personal injury.

5

Avoid installing this unit in a location where

foreign objects may fall onto this unit or where

this unit may be exposed to liquid dripping or

splashing. On the top of this unit, do not place:

– Other components, as they may cause damage

and/or discoloration on the surface of this unit.

– Burning objects (i.e., candles), as they may

cause fire, damage to this unit, and/or personal

injury.

– Containers with liquid in them, as they may fall,

spilling the liquid and causing an electrical

shock to the user and/or damage to this unit.

6

Do not cover this unit with a newspaper,

tablecloth, curtain, etc. in order not to obstruct

heat radiation. If the temperature inside this unit

rises, it may cause fire, damage to this unit, and/or

personal injury.

7

Do not plug in this unit to a wall outlet until all

connections are complete.

8

Do not operate this unit upside-down. It may

overheat, possibly causing damage.

9

Do not use excessive force on switches, knobs

and/or cords.

10

When disconnecting the power cord from the

wall outlet, grasp the plug; do not pull the cord.

11

Do not clean this unit with chemical solvents; this

might damage the finish. Use a clean, dry cloth.

12

Use only the voltage specified on this unit. Using

this unit with a higher voltage than specified is

dangerous and may cause fire, damage to this

unit, and/or personal injury. YAMAHA will not be

held responsible for any damage resulting from

use of this unit with a voltage other than as

specified.

13

To prevent damage by lightning, disconnect the

power cord from the wall outlet during an

electrical storm.

14

Do not attempt to modify or fix this unit. Contact

qualified YAMAHA service personnel when any

service is needed. The cabinet should never be

opened for any reason.

15

When not planning to use this unit for long

periods of time (i.e., vacation), disconnect the AC

power plug from the wall outlet.

16

Be sure to read the “TROUBLESHOOTING”

section on common operating errors before

concluding that this unit is faulty.

17

Before moving this unit, press STANDBY/ON to

set the unit in standby mode, then disconnect the

AC power plug from the wall outlet.

When playing DTS encoded CDs, excessive noise will

be heard from the analog stereo outputs. To avoid

possible damage to the audio system, the consumer

should take proper precautions when the analog

stereo outputs of the player are connected to an

amplification system. To enjoy DTS Digital

Surround™ playback, an external 5.1-channel DTS

Digital Surround™ decoder system must be

connected to the digital output of the player.

LASER SAFETY

This unit employs a laser. Due to possible eye injury,

only a qualified service person should remove the

cover or attempt to service this device.

DANGER

This unit emits visible laser radiation when open.

Avoid direct eye exposure to beam.

When this unit is plugged into a wall outlet, do not

place your eyes close to the opening of the disc tray

and other openings or look inside.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO

RAIN OR MOISTURE.

1

English

Contents

Introduction

Region Codes....................................................................2

Supplied accessories........................................................2

Notes about discs............................................................2

Cleaning discs....................................................................2

Patent information...........................................................2

Functional Overview

Front and Rear Panels.....................................................3

Remote Control...............................................................4

Preparation

General Notes on connections ....................................5

Digital Connections.........................................................5

Analog Connections........................................................5

Video Connections..........................................................6

S-Video terminal <A>..............................................................6

Composite Video terminal <B>.........................................6

Component Video terminal <C>......................................6

SCART Connection <D>......................................................6

Getting Started

Inserting batteries into the Remote Control............7

Using the remote control .......................................................7

Turning on the power ....................................................7

Selecting the color system that corresponds

to your TV.........................................................................7

Setting language preference...........................................8

Setting the OSD Language.....................................................8

Setting the Audio, Subtitle and Disc menu

language.............................................................................................9

Disc Operations

Basic Playback .................................................................10

General Operation........................................................10

Pausing playback........................................................................10

Selecting track/chapter...........................................................10

Searching backward/forward..............................................10

Stopping playback.....................................................................10

Selecting various repeat/shuffle functions ................11

Repeat and Shuffle...................................................................11

Repeating a section within a chapter/track................11

Operations for video playback (DVD/VCD/SVCD) ..11

Using the Disc Menu ..............................................................11

Zooming in...................................................................................11

Resuming playback from the last stopped point.....11

On-Screen Display (OSD)..................................................12

Special DVD Features...................................................13

Playing a Title ..............................................................................13

Camera Angle.............................................................................13

Audio...............................................................................................13

Subtitles..........................................................................................13

Special VCD & SVCD Features.................................. 13

Playback Control (PBC) ....................................................... 13

Preview Function...................................................................... 13

Playing MP3/DivX/JPEG/Kodak Picture CD............... 14

General Operation.................................................................. 14

Selecting a folder and track/file......................................... 15

Repeat and Shuffle................................................................... 15

Special picture disc features ....................................... 15

Preview Function (JPEG)...................................................... 15

Zoom picture............................................................................. 16

Playback with multi-angles................................................... 16

Scan Effect.................................................................................... 16

Playing MP3 music and JPEG picture

simultaneously............................................................................ 16

Setup Menu

General Setup menu..................................................... 17

Locking/Unlocking the disc for viewing........................ 17

Dimming player’s front panel display............................ 17

Programming disc tracks (not for Picture CD/

MP3)................................................................................................ 17

OSD Language........................................................................... 18

Screen Saver................................................................................ 18

Sleep Timer ................................................................................. 18

DivX

®

VOD registration code ........................................ 19

Audio Setup Menu ........................................................ 19

Setting the analog output.................................................... 19

Setting the Digital output..................................................... 20

CD Upsampling......................................................................... 20

Night Mode................................................................................. 21

Video Setup Menu......................................................... 21

TV Type......................................................................................... 21

Setting the TV Display........................................................... 21

Progressive................................................................................... 22

Picture Setting............................................................................ 22

Switching the YUV/RGB....................................................... 23

Preference Setup Menu ............................................... 24

Audio, Subtitle, Disc Menu................................................. 24

Restricting playback by Parental Control.................... 24

PBC (Playback Control) ....................................................... 24

MP3/JPEG Menu ....................................................................... 25

Changing the Password ........................................................ 25

Restoring to original settings.............................................. 25

Language Code .......................... 26

Troubleshooting ........................ 28

Glossary ...................................... 30

Specifications ............................. 31

2

Introduction

Thank you for purchasing this unit. This

Owner’s Manual explains the basic

operation of this unit.

DVD discs must be labeled for

ALL regions or Region 2 in

order to play on this Player. You

cannot play Discs that are

labeled for other regions.

– Remote control

– Batteries (two AA size) for remote

control

– Audio pin cable

– Video pin cable

– Owner’s Manual

– This unit is designed for use with DVD

video, Video CD, Super video CD, Audio CD,

CD-R, CD-RW, DVD+RW, DVD+R, DVD-R

and DVD-RW.

This unit can play:

– MP3, picture (Kodak, JPEG) files on CD-

R(W).

– JPEG/ISO 9660 format

– Maximum 30 characters display.

– DivX

®

disc on CD-R[W]/DVD+R[W]/

DVD-R[W] (3.11, 4.x and 5.x)

– CD-R and CD-RW cannot be played unless

finalized.

– Some discs cannot be played depending on

the recording conditions such as PC

environment and application software. The

characteristics and condition of the discs;

materials, scratches, curvature, and etc.,

may result in failure.

– Be sure to use only CD-R and CD-RW discs

made by reliable manufacturers.

– Do not use any non standard shaped discs

(heart, etc.)

– Do not use disc with tape, scals, or paste on

it, damage to the unit may result.

– Do not use a disc printed on its surface by

a commercially available label printer.

• When a disc becomes dirty, clean it

with a cleaning cloth. Wipe the disc

from the centre out. Do not wipe in a

circular motion.

• Do not use solvents such as benzine,

thinner, commercially available cleaners,

or antistatic spray intended for analog

records.

Manufactured under license from

Dolby Laboratories. “Dolby” and

the double-D symbol are

trademarks of Dolby

Laboratories.

”DTS” and “DTS Digital Out” are

trademarks of Digital Theater

Systems, Inc.

DivX, DivX Certified, and

associated logos are trademarks

of DivXNetworks, Inc and are

used under license.

Region Codes

Supplied accessories

Notes about discs

ALL

2

Cleaning discs

Patent information

This product incorporates copyright protection

technology that is protected by method claims of

certain U.S. patents and other intellectual property

rights owned by Macrovision Corporation and

other rights owners. Use of this copyright

protection technology must be authorized by

Macrovision Corporation, and is intended for home

and other limited viewing uses only unless

otherwise authorized by Macrovision Corporation.

Reverse engineering or disassembly is prohibited.

3

English

Functional Overview

* Press button for about two seconds.

Caution: Do not touch the inner pins of the jacks on the rear panel.

Electrostatic discharge may cause permanent damage to the unit.

Front and Rear Panels

STANDBY/ON

– turns on this unit or sets it to the

standby mode

Disc tray

/ OPEN/CLOSE

– opens or closes the disc tray

PROGRESSIVE indicator

– lights up when the unit enters

Progressive mode

9 STOP

– stops playback

; PAUSE

– pauses playback

B PLAY

– starts playback

Front panel display

– shows information about the

operational status of the unit

AC Power Cord

– connects to a standard AC outlet

COAXIAL digital audio output

– connects to a digital (coaxial) input of

your AV receiver or stereo system

OPTICAL digital audio output

– connects to a digital (optical) input of

your AV receiver or stereo system

VIDEO output

(composite video out)

– connects to a video input on your AV

receiver

AUDIO OUT (Left/Right)

– connect to AUDIO inputs

of your AV receiver

or stereo system

AV terminal

– connects to a SCART cable

COMPONENT video outputs

– connect to an AV receiver with Y

PB/CB PR/CR inputs

S VIDEO output

– connects to an S-Video input on

your AV receiver

4

Functional Overview

* Press and hold button for about two seconds.

Remote Control

MENU SETUP

ENTER

OK

STOP

ANGLE

AB

PAUSE

PLAY

23

546

8

0

79

1

TOP MENU RETURN

ON SCREEN

DVD

ZOOM AUDIO

MUTESCAN

SUBTITLE

REPEAT

B/

|

– turn this unit ON or go to

standby-on mode

0-9 numeric keypad

– select numbered items in a

menu

ON SCREEN

– access or remove player’s On

Screen Display menu

SETUP

– access or remove player’s

setup menu

T

– search forward* / next chapter

or track

SUBTITLE

– subtitle language selector

ANGLE

– select DVD camera angle

ZOOM

– enlarge video image

AUDIO

– audio language and format

selector

TOP MENU/RETURN

– display the top-level disc menu

(DVD) / go back to previous

menu (VCD)

MENU

– access menu of a disc (DVD) /

switch PBC on/off (VCD)

1 2 3 4

– (left/right/up/down) select an

item in the menu

ENTER/OK

– acknowledge menu selection

S

– search backward* / go to a

previous chapter or track

STOP ( 9 )

– stop playback

PLAY ( B )

– start playback

PAUSE ( ; )

– pause playback temporarily /

frame-by-frame playback

REPEAT

– repeat chapter, track, title, disc

/ shuffle chapter, track

A-B

– repeat a specific segment

SCAN

– preview the content of a track

or whole disc (VCD) / play the

first 6 seconds or less of each

track (CD)

MUTE

– disable or enable sound output

5

English

Preparation

Never make or change connections with

the power switched on.

• Depending on the equipment you wish

to connect, there are various ways you

could connect this unit. Possible

connections are shown in the following

drawings.

• Please refer to the manuals of other

equipment as necessary to make the

best connections.

• Do not connect this unit via your VCR.

The video quality could be distorted by

the copy protection system.

• Do not connect this unit’s audio out

jack to the phono in jack of your audio

system.

This unit has COAXIAL and OPTICAL

digital out jacks. Connect one or both of

them to your AV receiver equipped with

Dolby digital, DTS, or MPEG decoder

using each specific cable (separate

purchase).

You will need to set this unit’s digital

output to ALL (see page 20

“DIGITAL OUTPUT”).

Note:

– If the audio format of the digital output

does not match the capabilities of your

receiver, the receiver will produce a strong,

distorted sound or no sound at all. Make

sure to select the appropriate audio format

at menu screen included on the disc.

Pressing AUDIO once or more may change

not only audio languages but also audio

formats, and the selected format appears

for several seconds on the status window.

Use audio/video cable supplied with this

unit to connect AUDIO OUT L (left) and

R (right) jacks of this unit to corresponding

input jacks of your audio equipment such

as Stereo amplifier.

General Notes on connections

Digital Connections

COAXIAL

IN

OPTICAL

IN

C

O

AV receiver

Left front

speaker

Right surround

speaker

Center

speaker

Subwoofer

Right front

speaker

Left surround

speaker

Surround

back speaker

Analog Connections

1 CD/DVD

RL

R

L

R

Right

speaker

Left

speaker

(supplied)

Stereo

amplifier

6

Preparation

If your AV receiver has video output jacks,

connect your receiver (and then to your

TV) so that you can use one TV for several

different video sources (LD, VCR etc.) by

simply switching the input source selector

of your receiver.

The player has three types of video output

jacks. Use one of them in accordance with

the input jacks of the equipment to be

connected.

S-Video terminal <A>

S (separate) video connection achieves a

clearer picture than composite video

connection by separating color and

luminance when transmitting signals. Use

commercially available S-video cable.

Receiver (and TV) with S-video input is

required.

Composite Video terminal <B>

Use audio/video cable supplied with this

unit when connecting the player to a TV.

Component Video terminal <C>

Component video connection achieves

high fidelity in reproducing colors (better

performance than S-video connection),

separating video signal into luminance (Y,

terminal color-coded as green), and color

difference (Pb, blue/Pr, red). Use

commercially available coaxial cables.

Receiver (and TV) with component input is

required. Observe the color of each jack

when connecting. If your receiver does not

have component output jacks, connecting

the player’s component output directly to

your TV’s component input can reproduce

better video image.

Note:

– You need to set this unit’s component

output to YUV (see page 23 “Switching the

YUV/RGB”).

SCART Connection <D>

If your TV has only terminal for video

input, and you want to connect it directly

to this unit, you can use this unit’s SCART

output jack.

Note:

– Ensure that the “TV” indication on SCART

cable is connected to the TV set and “DVD”

indication on SCART cable is connected to

this unit.

Video Connections

VIDEO

OUT

VIDEO

IN

COMPONENT

VIDEO OUT

COMPONENT

VIDEO IN

S VIDEO

OUT

S VIDEO

IN

COMPONENT

VIDEO IN

S VIDEO

INPUT

VIDEO

YPBCB PRCR

V

S

AV receiver

(supplied)

7

English

Getting Started

1 Open the battery compartment.

2 Insert two batteries type R06 or AA,

following the indications (+ –) inside the

compartment.

3 Close the cover.

Using the remote control

Handling the remote control

• Do not spill water or other liquids on

the remote control.

• Do not drop the remote control.

• Do not leave or store the remote

control in the following types of

conditions:

– high humidity such as near a bath

– high temperature such as near a heater

or stove

– extremely low temperature

– dusty places

1 Connect the AC power cord to the power

outlet.

2 Turn on the TV and your AV receiver.

3 Select the appropriate input source at the

AV receiver that was used to connect to

this unit. Refer to the equipment owner’s

manual for detail.

4 Turn this unit on.

5 Set the TV to the correct Video IN

channel. (eg. EXT1, EXT2, AV1, AV2,

AUDIO/VIDEO, etc. Refer to your TV

owner’s manual for detail)

➜ The front display lights up and the

default screen appears on the TV.

This DVD Player is compatible with both

NTSC and PAL. Select the color system

that matches your TV.

1 Press SETUP.

2 Press 2 repeatedly to select {VIDEO

SETUP PAGE}.

3 Press 34 to highlight {TV TYPE}, then

press 2.

Step1: Inserting batteries

into the Remote Control

2

1

3

2

30°

Point the remote control

at the sensor, within

approximately 6 m

(20 feet) of the unit.

Remote control

sensor

Step2: Turning on the power

Step3: Selecting the color

system that corresponds to

your TV

VIDEO SETUP PAGE

TV TYPE PAL

TV DISPLAY NTSC

PROGRESSIVE MULTI

PICTURE SETTING

COMPONENT

8

Getting Started

4 Press 34 to highlight one of the options

below:

PAL

Select this if the connected TV is PAL

system. It will change the video signal of a

NTSC disc and output in PAL format.

NTSC

Select this if the connected TV is NTSC

system. It will change the video signal of a

PAL disc (VCD only) and output in NTSC

format.

MULTI

Select this if the connected TV is

compatible with both NTSC and PAL

(multi-system). The output format will be

in accordance with the video signal of the

disc.

5 Select an item and press ENTER/OK.

Helpful Hint:

– Before changing the current TV

Standard setting, ensure that your TV

supports the ‘selected TV Type’

system.

– If there is not proper picture on your

TV, wait for 15 seconds for auto

recover.

You can select your own preferred

language settings.This DVD Player will

automatically switch to the language for

you whenever you load a disc. If the

language selected is not available on the

disc, the disc’s default language will be used

instead. The OSD language in the system

menu, will remain once selected.

Setting the OSD Language

1 Press SETUP.

2 Press 1 2 to select {GENERAL SETUP

PAGE}.

3 Press 34 to highlight {OSD LANGUAGE},

then press 2.

4 Press 34 to select a language and press

ENTER/OK.

CHANGING PAL TO NTSC

1. ENSURE THAT YOUR TV SYSTEM SUPPORTS

NTSC STANDARD.

2. IF THERE IS A DISTORTED PICTURE

DISPLAYED ON THE TV, WAIT 15 SECONDS

FOR AUTO RECOVER.

CancelOK

Step4: Setting language

preference

GENERAL SETUP PAGE

DISC LOCK

DISPLAY DIM

PROGRAM

OSD LANGUAGE ENGLISH

SCREEN SAVER DANISH

SLEEP GERMAN

DIVX(R) VOD CODE SPANISH

FRENCH

TIPS: To return to the previous menu, press 1.

To remove the menu, press SETUP.

9

English

Getting Started

Setting the Audio, Subtitle and

Disc menu language

1 Press STOP 9 twice, then press SETUP.

2 Press 2 repeatedly to select

{PREFERENCE PAGE}.

3 Press 34 to highlight one of the options

below at a time, then press 2.

– ‘Audio’ (disc’s soundtrack)

– ‘Subtitle’ (disc’s subtitles)

– ‘Disc Menu’ (disc’s menu)

4 Press 34 to select a language and press

ENTER/OK.

If the language you want is not in the

list, then select {OTHERS},

then use the numeric keypad (0-9) on

the remote to enter the 4-digit language

code (see page 26 “Language Code”) and

press ENTER/OK.

5 Repeat steps 3–4 for other language

settings.

PREFERENCE PAGE

AUDIO ENGLISH

SUBTITLE DANISH

DISC MENU GERMAN

PARENTAL SPANISH

PBC FRENCH

MP3/JPEG NAV ITALIAN

PASSWORD DUTCH

DEFAULT

TIPS: To return to the previous menu, press 1.

To remove the menu, press SETUP.

10

Disc Operations

IMPORTANT!

– If the inhibit icon ( or X) appears

on the TV screen when a button is

pressed, it means the function is

not available on the current disc or

at the current time.

– Depending on the DVD or VIDEO

CD, some operations may be

different or restricted.

– Do not push on the disc tray or put

any objects other than disc on the

disc tray. Doing so may cause the

disc player malfunction.

1 Press STANDBY/ON on the front panel

to turn on the DVD player.

2 Press OPEN/CLOSE / on the front

panel to open disc loading tray.

3 Place the chosen disc in the tray, with the

label facing up.

4 Press OPEN/CLOSE / again to close

the tray.

➜ After recognizing this disc, the player

begin to playback automatically.

➜ If you press PLAY B when the tray is

open, this unit closes the tray and starts

playback.

Unless otherwise stated, all operations

described are based on Remote Control

use.

Pausing playback

1 During playback, press PAUSE ;.

➜ Playback will pause and sound will be

muted.

2 Press PAUSE ; again to select the next

picture frame.

3 To resume normal playback, press

PLAY B.

Selecting track/chapter

• Press S / T or use the numeric

keypad (0-9) to key in a track/chapter

number.

➜ If repeat mode is active, pressing S /

T will replay the same track/chapter.

Searching backward/forward

• Press and hold S / T, then press

PLAY B to resume normal playback.

➜ While searching, pressing S / T

again will decrease/increase the search

speed.

Stopping playback

• Press STOP 9.

Basic Playback

General Operation

TIPS: The operating features described here might not be possible for certain discs. Always refer to

the instructions supplied with the discs.

11

English

Disc Operations

Repeat and Shuffle

• While playing a disc, press REPEAT

continuously to choose a ‘Play Mode’.

DVD

➔ RPT ONE (repeat chapter)

➔ RPT TT (repeat title)

➔ SHUFFLE (shuffle)

➔ RPT SHF (shuffle repeat)

➔ RPT OFF (repeat off)

VCD/SVCD/CD

➔ RPT ONE (repeat track)

➔ RPT ALL (repeat disc)

➔ SHUFFLE (shuffle)

➔ RPT SHF (shuffle repeat)

➔ RPT OFF (repeat off)

MP3/DivX

➔ RPT ONE (repeat track)

➔ RPT FLD (repeat folder)

➔ SHUFFLE (random play)

➔ RPT OFF (repeat off)

Helpful Hint:

– For VCD, repeat playback is not possible if

the PBC mode is switched on.

Repeating a section within a

chapter/track

1 While playing a disc, press A-B at your

chosen starting point.

2 Press A-B again at your chosen end point.

➜ The section A and B can be set only

within the same chapter/track.

➜ The section will now repeat

continuously.

3 To exit the sequence, press A-B.

Using the Disc Menu

Depending on the disc, a menu may appear

on the TV screen once you load in the disc.

To select a playback feature or item

• Use 1 234 or numeric keypad

(0-9) on the remote, then press

ENTER/OK to start playback.

To access or remove the menu

• Press MENU on the remote.

Zooming in

This function allows you to enlarge the

picture on the TV screen and to pan

through the enlarged picture.

1 During playback, press ZOOM repeatedly

to display the picture with different scales.

➜ Use 1 234 to pan through the

enlarged picture.

➜ Playback will continue.

2 Press ZOOM repeatedly to return to the

original size.

Resuming playback from the last

stopped point

Resume playback of the last 10 discs is

possible, even if the disc was ejected or the

power switched off.

• Load one of the last 10 discs.

➜ “LOADING” appears.

• Press PLAY B and the disc will be

played back from the last point.

To cancel resume mode

• In stop mode, press STOP 9 again.

Selecting various repeat/shuffle

functions

Operations for video playback

(DVD/VCD/SVCD)

TIPS: The operating features described here might not be possible for certain discs. Always refer to

the instructions supplied with the discs.

12

Disc Operations

On-Screen Display (OSD)

OSD menu shows the disc playback

information (for example, title or chapter

number, elapsed playing time, audio/

subtitle language), a number of operations

can be done without interrupting disc

playback.

1 During playback, press ON SCREEN.

➜ A list of available disc information

appears on the TV screen.

DVD

VCD/SVCD

2 Press 34 to view the information and

press ENTER/OK to access.

3 Use the numeric keypad (0-9) to input

the number/time or press

34 to make the

selection, then press ENTER/OK to

confirm.

➜ Playback will change to the chosen time

or to the selected title/chapter/track.

Title/Chapter/Track selection (DVD/

VCD)

1 Press 34 to select {TITLE} or

{CHAPTER} (DVD) or {TRACK} (VCD).

2 Press ENTER/OK.

3 Select a title, chapter or track number

using the numeric buttons.

Time Search (DVD/VCD)

1 Press 34 to select {TT TIME} or {CH

TIME} (DVD) or {TRACK TIME} or {DISC

TIME} (VCD).

➜ {TT TIME} refers to the total time of the

current title, and the {CH TIME} refers

to the total time of the current chapter.

2 Press ENTER/OK.

3 Enter hours, minutes and seconds from left

to right using the numeric buttons. (e.g.

0:34:27)

Audio/Subtitle/Angle (DVD)

You can change {AUDIO}, {SUBTITLE} or

{ANGLE} if available on the disc you are

playing.

1 Press 34 to select {AUDIO}, {SUBTITLE}

or {ANGLE}.

2 Press ENTER/OK.

3 For Audio and Subtitle,

Press 34 to highlight your selection and

press ENTER/OK.

or

For Angle,

Select an angle using the numeric buttons.

Repeat/Time Display (DVD/VCD)

1 Press 34 to select {REPEAT} or {TIME

DISP.}.

2 Press ENTER/OK.

3 Press 34 to highlight your selection and

press ENTER/OK.

Time display (CD)

Each time you press ON SCREEN, the

time display changes as follows;

MENU

BITRATE

TITLE 02/14

CHAPTER 02/14

AUDIO 5.1CH

SUBTITLE ENG

MENU

BITRATE

TRACK 02/14

DISC TIME 0:49:17

TRACK TIME 0:03:43

REPEAT OFF

Total Elapsed Total Remain

Single Remain Single Elapsed

TIPS: The operating features described here might not be possible for certain discs. Always refer to

the instructions supplied with the discs.

13

English

Disc Operations

Playing a Title

1 Press MENU.

➜ The disc title menu appears on the TV

screen.

2 Use 1 234 or numeric keypad (0-9)

to select a play option.

3 Press ENTER/OK to confirm.

Camera Angle

• Press ANGLE repeatedly to select

different desired angle.

Audio

Changing the Audio Language and/or

format

• Press AUDIO repeatedly to select

different audio languages.

Subtitles

• Press SUBTITLE repeatedly to select

different subtitle languages.

Playback Control (PBC)

For VCD with Playback Control

(PBC) feature (version 2.0 only)

• Press MENU to toggle between ‘PBC

ON’ and ‘PBC OFF’.

➜ If you select ‘PBC ON’, the disc menu (if

available) will appear on the TV.

➜ Use the S / T or the numeric

keypad (0-9) to select a play option.

• During playback, pressing TOP

MENU/RETURN will return to the

menu screen (if PBC is on).

If you want to skip the index menu

and playback directly from the

beginning,

• Press MENU on the remote control to

switch to PBC off.

Preview Function

1 Press SCAN.

2 Press 34 to highlight {TRACK DIGEST},

{DISC INTERVAL} or {TRACK

INTERVAL}.

3 Press ENTER/OK to open one option.

Note:

– You can select {TRACK INTERVAL} only

during playback, with PBC Off.

Special DVD Features Special VCD & SVCD Features

SELECT DIGEST TYPE:

TRACK DIGEST

DISC INTERVAL

TRACK INTERVAL

TIPS: The operating features described here might not be possible for certain discs. Always refer to

the instructions supplied with the discs.

14

Disc Operations

TRACK DIGEST

This function will minimize the picture of

every track in order to display every six of

these tracks on the screen to help you

know the content of every track on the

disc.

DISC INTERVAL

This function is used to divide a disc into

six parts by regular intervals and display

them on one page to preview the whole

disc.

TRACK INTERVAL

This function is used to divide a single track

into six parts by regular intervals and

display them on one page to help you

preview the selected track.

4 Use 1 234 to select a track or use

numeric keypad (0-9) to input the

selected track number next to {SELECT}.

5 Press S / T to open the previous or

next page.

6 Press ENTER/OK to confirm.

To quit preview function

• Use 1 234 to highlight {EXIT} and

press ENTER/OK to confirm.

To return to preview menu

• Use 1 234 to highlight {MENU} and

press ENTER/OK to confirm.

For CD

• At stop mode, press SCAN on the

remote control.

➜ Each track will be played for a few

seconds.

General Operation

1 Load a disc.

➜ The disc reading time may exceed 30

seconds due to the complexity of the

directory/file configuration.

➜ The data disc menu appears on the TV

screen.

2 Playback will start automatically. If not

press PLAY B.

During playback, you can;

• Press S / T to select another

track/file in the current folder.

• Press ; to pause playback.

Helpful Hint:

– It may not be possible to play certain MP3/

JPEG/DivX/MPEG-4 disc due to the

configuration and characteristics of the disc

or condition of the recording.

(example for 6 thumbnail pictures display)

TIPS: The operating features described here might not be possible for certain discs. Always refer to

the instructions supplied with the discs.

Playing MP3/DivX/JPEG/Kodak

Picture CD

00:00 00:00

001/020

Piano

Cello

Jazz

Live

Favorite

MP3

15

English

Disc Operations

Selecting a folder and track/file

1 Press 34 to select the folder and press

ENTER/OK to open the folder.

2 Press 34 to select a track/file.

3 Press ENTER/OK to confirm.

➜ Playback will start from the selected file

to the end of the folder.

Repeat and Shuffle

When the Picture CD/MP3 CD menu is

shown on the screen;

• Press REPEAT continuously to access

different ‘Play Mode’.

➜ FOLDER: files will be played back once.

➜ REPEAT ONE: one file being played

repeatedly.

➜ REPEAT FOLDER: all files in one folder

being played repeatedly.

➜ SHUFFLE: all files in the current folder

being played at random order.

1 Load a Picture disc (Kodak Picture CD,

JPEG).

➜ For Kodak disc, the slide show will

begin.

➜ For JPEG disc, the picture menu appears

on the TV screen.

2 Press PLAY B to start the slide-show

playback.

Preview Function (JPEG)

This function shows the content of the

current folder or the whole disc.

1 Press STOP 9 during playback.

➜ 12 thumbnail pictures will appear on the

TV screen.

2 Press S / T to display the other

pictures on the previous/next page.

3 Use 1 234 to highlight one of the picture

and press ENTER/OK to start playback

OR

Move the cursor to highlight on the

bottom of the page to start playback from

the first picture on the current page.

4 Press MENU to return to Picture CD

menu.

TIPS: The operating features described here might not be possible for certain discs. Always refer to

the instructions supplied with the discs.

Special picture disc features

16

Disc Operations

Zoom picture

1 During playback, press ZOOM repeatedly

to display the picture with different scales.

2 Use 1 234 to view the zoomed picture.

Playback with multi-angles

• During playback, press 1 234 to

rotate the picture on the TV screen.

1: rotate the picture anti-clockwise

2: rotate the picture clockwise

3: flip the picture vertically

4: flip the picture horizontally

Scan Effect

• Press ANGLE repeatedly to choose

different scan effect.

➜ Various of scan effect appears on the

top left hand corner on the TV screen.

Playing MP3 music and JPEG

picture simultaneously

1 Load a disc that contains music and

picture.

➜ The disc menu appears on the TV

screen.

2 Select an MP3 track.

3 During MP3 music playback, select a

picture from the TV screen and press

PLAY B.

➜ The picture files will be played back one

after another until end of the folder.

4 To quit simultaneous playback, press

MENU followed by STOP 9.

Helpful Hint:

– Some files on Kodak or JPEG disc may be

distorted during playback due to the

configuration and characteristics of the disc.

TIPS: The operating features described here might not be possible for certain discs. Always refer to

the instructions supplied with the discs.

La pagina sta caricando ...

Yamaha DVD-S550 Manuale del proprietario

Yamaha DVD-S550 Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti