Beretta Px4 Storm Full Size Manuale utente

Marca: Beretta

Modello: Px4 Storm Full Size

Tipo: Manuale utente

Fig. 36Fig. 35

Fig. 33

Fig. 34

Le illustrazioni e descrizioni di questo opuscolo si intendono fornite a titolo

indicativo. La Casa si riserva pertanto il diritto di apportare ai suoi modelli, in

qualsiasi momento e senza preavviso, quelle modifiche che ritenesse utili per

migliorarli o per qualsiasi esigenza di carattere costruttivo e commerciale.

The illustrations and descriptions given in this brochure are intended as a general

guide only, and must not be taken as binding. The Company, therefore, reserves

the right to make, at any moment and without prior notice, any changes it thinks

necessary to improve its models or to meet any requirements of manufacturing or

commercial nature.

Printed in Italy

batan - Gardone V.T.

Beretta Pubblicità - C62009

02/05

Manuale di Istruzione

Instruction Manual

Fabbrica d'Armi Pietro Beretta S.p.A.

Via Pietro Beretta, 18

25063 GARDONE VAL TROMPIA (Brescia) Italia

Tel. (030) 8341.1

www.beretta.com

Fig. 9

Fig. 11

Fig. 13

Fig. 10

Fig. 12

Fig. 14

Fig. 16Fig. 15

Figure a pag. 2, 11, 12, 85, 86 e 87

ITALIANO ENGLISH

page 45

UTILIZZATE ESCLUSIVAMENTE RICAMBI E ACCESSORI

ORIGINALI BERETTA. L’UTILIZZO DI RICAMBI E ACCESSORI

NON ORIGINALI POTREBBE CAUSARE DIFETTI DI

FUNZIONAMENTO E/O ROTTURE DI PARTI CHE NON

SARANNO COPERTI DALLA GARANZIA BERETTA.

QUESTO MANUALE D’ISTRUZIONI DOVRÀ SEMPRE

ACCOMPAGNARE LA PISTOLA. ANCHE IN CASO DI CESSIONE

DELL’ARMA AD ALTRA PERSONA.

AVVERTENZA: Il Fabbricante e/o i suoi Distributori Ufficiali

Locali non assumono responsabilità alcuna per cattivo

funzionamento del prodotto o per lesioni fisiche o danni alla

proprietà causati in toto o in parte da impiego criminale o

negligente del prodotto, da maneggio improprio od incauto, da

modifiche non autorizzate, da impiego di munizioni* difettose,

improprie, caricate a mano o ricaricate, da abuso o incuria

nell'uso del prodotto o da altri fattori non soggetti al controllo

diretto ed immediato del fabbricante.

* Vedi paragrafo "Munizioni"

ATTENZIONE: Assicuratevi sempre che la sicura sia

correttamente inserita (se presente) fino a quando non siete

pronti a sparare. Una sicura non completamente inserita non

impedirà all'arma di sparare.

ATTENZIONE: QUALSIASI ARMA DA FUOCO E' POTENZIALMENTE

LETALE. LEGGETE ATTENTAMENTE E CAPITE A FONDO LE NORME

DI SICUREZZA BASILARI PRIMA D’INIZIARE AD UTILIZZARE

QUEST' ARMA.

In aggiunta alle Norme di Sicurezza Basilari, vi sono altre Norme

di Sicurezza riguardanti le operazioni di caricamento,

scaricamento, smontaggio, montaggio ed uso di quest'arma

situate all'interno di questo libretto d'istruzioni.

ATTENZIONE: LEGGETE ATTENTAMENTE TUTTE LE PARTI DEL

MANUALE PRIMA DI UTILIZZARE QUEST'ARMA. ASSICURATEVI

CHE QUALSIASI PERSONA CHE UTILIZZI O POSSA AVERE

ACCESSO A QUEST'ARMA ABBIA LETTO E COMPRESO A FONDO

LE ISTRUZIONI CONTENUTE IN QUESTO MANUALE PRIMA DI

USARE L'ARMA O DI AVERNE ACCESSO.

NOTES:

Fig. 17

Fig. 19

Fig. 21

Fig. 18

Fig. 20

Fig. 22

Fig. 24Fig. 23

Fig. 25

Fig. 27

Fig. 29

Fig. 26

Fig. 28

Fig. 30

Fig. 32

Fig. 31

Illustrations on pages

2, 53, 54, 85, 86 and 87

ENGLISH

WE RECOMMEND THE USE OF ORIGINAL BERETTA SPARE

PARTS AND ACCESSORIES. THE USE OF OTHER

MANUFACTURER’S SPARE PARTS AND ACCESSORIES COULD

CAUSE MALFUNCTIONS AND/OR BREAKAGES THAT WILL

NOT BE COVERED BY THE BERETTA WARRANTY.

ALWAYS KEEP THIS MANUAL WITH YOUR FIREARM. INCLUDE IT

WITH THE PISTOL WHEN IT CHANGES OWNERSHIP OR WHEN IT

IS LOANED OR PRESENTED TO ANOTHER PERSON.

CAUTION:The Manufacturer and/or its Local Official Distributors

assume no responsibility for product malfunction or for physical

injury or property damage resulting in whole or in part from

criminal or negligent use of the product, improper or careless

handling, unauthorized modifications, use of defective, improper,

hand-loaded, reloaded or remanufactured ammunition*,

customer abuse or neglect of the product, or other influences

beyond manufacturer's direct and immediate control.

* See paragraph “Ammunition”.

WARNING: Always ensure that the safety is full engaged (if

present) until ready to fire. A safety, which is not fully engaged,

will not prevent firearm discharge.

WARNING: ALL FIREARMS HAVE LETHAL POTENTIAL. READ THE

BASIC SAFETY RULES CAREFULLY AND UNDERSTAND THEM

FULLY BEFORE ATTEMPTING TO USE THIS FIREARM.

In addition to the Basic Safety Rules, there are other Safety

Rules pertaining to the loading, unloading, disassembly,

assembly and use of this firearm, located throughout this

manual.

WARNING: READ THE ENTIRE MANUAL CAREFULLY BEFORE

USING THIS FIREARM. MAKE SURE THAT ANY PERSON USING

OR HAVING ACCESS TO THIS FIREARM READS AND

UNDERSTANDS ALL OF THIS MANUAL PRIOR TO USE OR

ACCESS.

CONTENTS

Page

BASIC SAFETY RULES 47

DESCRIPTION 55

SAFETY FEATURES 55

OPERATIONAL FEATURES 57

ERGONOMIC, MODULAR FEATURES 60

SPECIFICATIONS AND TECHNICAL DATA 62

GENERAL OPERATION 63

LOAD CHECK 63

BARREL OBSTRUCTIONS CHECK 65

FIELD STRIPPING 65

REASSEMBLY 66

AMMUNITION 67

LOADING 68

UNLOADING 71

FIRING 73

MAINTENANCE 77

HOW TO REPLACE THE BACK-STRAP ON THE GRIP 79

HOW TO REPLACE THE MAGAZINE RELEASE BUTTON 80

HOW TO REVERSE THE MAGAZINE RELEASE BUTTON 81

STORAGE 82

TROUBLESHOOTING 83

This instruction manual consists of 87 pages.

BASIC SAFETY RULES

WARNING: PLEASE READ THIS MANUAL BEFORE HANDLING

YOUR FIREARM.

WARNING: FIREARMS CAN BE DANGEROUS AND CAN

POTENTIALLY CAUSE SERIOUS INJURY, DAMAGE TO PROPERTY

OR DEATH, IF HANDLED IMPROPERLY. THE FOLLOWING SAFETY

RULES ARE AN IMPORTANT REMINDER THAT FIREARM SAFETY IS

YOUR RESPONSIBILITY.

1. NEVER POINT A FIREARM AT SOMETHING THAT IS NOT

SAFE TO SHOOT.

Never let the muzzle of a firearm point at any part of your body

or at another person. This is especially important when

loading or unloading the firearm. When you are shooting at a

target, know what is behind it. Some bullets can travel over a

mile. If you miss your target or if the bullet penetrates the

target, it is your responsibility to ensure that the shot does

not cause unintended injury or damage.

2. ALWAYS TREAT A FIREARM AS

IF IT WERE LOADED.

Never assume that a firearm is

unloaded. The only certain way

to ensure that a firearm has the

chamber(s) empty is to open the

chamber and visually and

physically examine the inside to

see if a round is present.

Removing or unloading the magazine will not guarantee that

a firearm is unloaded or cannot fire. Shotguns and rifles can

be checked by cycling or removing all rounds and by then

opening and inspecting the chamber so that a visual

inspection of the chamber for any remaining rounds can be

made.

3. STORE YOUR FIREARM SO THAT CHILDREN CANNOT GAIN

ACCESS TO IT.

It is your responsibility to ensure that children under the age

of 18 or other unauthorized persons do not gain access to

your firearm. To reduce the risk of accidents involving

children, unload your firearm, lock it and store the

ammunition in a separate locked location. Please note that

devices intended to prevent accidents - for example, cable

locks, chamber plugs, etc, - may not prevent use or misuse of

your firearm by a determined person. Firearm storage in a

steel gun safe may be more appropriate to reduce the

likelihood of intentional misuse of a firearm by an

unauthorized child or person.

4. NEVER SHOOT AT WATER OR AT A HARD SURFACE.

Shooting at the surface of water or at

a rock or other hard surface

increases the chance of ricochets or

fragmentation of the bullet or shot,

which can result in the projectile

striking an unintended or peripheral

target.

5. KNOW THE SAFETY FEATURES OF THE FIREARM YOU ARE

USING, BUT REMEMBER: SAFETY DEVICES ARE NOT A

SUBSTITUTE FOR SAFE HANDLING PROCEDURES.

Never rely solely on a safety device to prevent an accident. It

is imperative that you know and use the safety features of the

particular firearm you are handling, but accidents can best be

prevented by following the safe handling procedures

described in these safety rules and elsewhere in the product

manual. To further familiarize yourself with the proper use of

this or other firearms, take a Firearms Safety Course taught

by an expert in firearms use and safety procedures.

6. PROPERLY MAINTAIN YOUR FIREARM.

Store and carry your firearm so that dirt or lint does not

accumulate in the working parts. Clean and oil your firearm,

following the instructions provided

in this manual, after each use to

prevent corrosion, damage to the

barrel or accumulation of impurities

which can prevent use of the gun in

an emergency. Always check the

bore and chamber(s) prior to loading

to ensure that they are clean and

free from obstructions. Firing with

an obstruction in the barrel or

chamber can rupture the barrel and injure you or others

nearby. In the event you hear an unusual noise when

shooting, stop firing immediately, engage the manual safety

and unload the firearm. Make sure the chamber and barrel

are free from any obstruction, like a bullet blocked inside the

barrel due to defective or improper ammunition.

7. USE PROPER AMMUNITION.

Only use factory-loaded, new ammunition manufactured to

industry specifications: CIP (Europe and elsewhere), SAAMI

(U.S.A.). Be certain that each round you use is in the proper

caliber or gauge and type for the particular firearm. The

caliber or gauge of the firearm is clearly marked on the barrels

of shotguns and on the slide or barrel of pistols. The use of

reloaded or remanufactured ammunition can increase the

likelihood of excessive cartridge pressures, case-head

ruptures or other defects in the ammunition that can cause

damage to your firearm and injury to yourself or others nearby.

8. ALWAYS WEAR PROTECTIVE GLASSES AND EARPLUGS

WHEN SHOOTING.

The chance that gas, gunpowder or

metal fragments will blow back and

injure a shooter who is firing a gun

is rare, but the injury that can be

sustained in such circumstances

can be severe, including the

possible loss of eyesight. A

shooter must always wear impact

resistant shooting glasses when

firing any firearm. Earplugs or other

high-quality hearing protectors help reduce the chance of

hearing damage from shooting.

9. NEVER CLIMB A TREE, FENCE OR OBSTRUCTION WITH A

LOADED FIREARM.

Open and empty the chamber(s) of your firearm and engage

the manual safety before climbing or descending a tree or

before climbing a fence or jumping over a ditch or other

obstruction. Never pull or push a loaded firearm toward

yourself or another person. Always unload a firearm, visually

and physically check to see that the

magazine, loading mechanism and

chamber are unloaded, and action

is open before handing it to another

person. Never take a firearm from

another person unless it is

unloaded, visually and physically

checked to confirm it is unloaded,

and the action is open.

10. AVOID ALCOHOLIC BEVERAGES OR JUDGMENT/REFLEX

IMPAIRING MEDICATION WHEN SHOOTING.

Do not drink and shoot. If you take

medication that can impair motor

reactions or judgment, do not

handle a firearm while you are

under the influence of the

medication.

11. NEVER TRANSPORT A LOADED FIREARM.

Unload a firearm before putting it in a vehicle (chamber

empty, magazine empty). Hunters and target shooters

should load their firearm only at their destination, and only

when they are ready to shoot. If you carry a firearm for self-

protection, leaving the chamber unloaded can reduce the

chance of an unintentional discharge.

12. LEAD WARNING.

Discharging firearms in poorly ventilated areas, cleaning

firearms, or handling ammunition may result in exposure to

lead and other substances known to cause birth defects,

reproductive harm, and other serious physical injury. Have

adequate ventilation at all times. Wash hands thoroughly

after exposure.

WARNING: It is YOUR responsibility to know and abide by

Federal, State and Local laws governing the sale, transportation

and use of firearms in your area.

WARNING: This firearm has the capability of taking your life or

the life of someone else! Always be extremely careful with your

firearm. An accident is almost always the result of not following

basic firearm safety rules.

Especially for U.S. consumers:

For information about Firearm Safety Courses in your area,

please visit the National Rifle Association’s web site at

www

.nra.org.

Fig. 1

Fig. 2

Mod. F

ABCP

H H D

hammer half-cocked,

safety disengaged

hammer decocked,

safety disengaged

hammer decocked,

safety engaged

Fig. 5 Fig. 6

Fig. 7

Fig. 8

hammer cocked,

safety disengaged

Mod. D

Fig. 4Fig. 3

Mod. G

DESCRIPTION

The new Beretta Px4 Storm pistol is the most advanced

expression of technological and aesthetic features in a

semiautomatic sidearm.

Built around a modular concept that a pistol can be adapted to

different needs and modes of operations, without compromising

on ergonomics and the renowned Beretta reliability and

performance, the Px4 Storm emphasizes power, ease of

handling, performance and reliability.

Initially manufactured in three calibers, the Px4 Storm uses an

exclusive Beretta designed innovative locked-breech with rotating

barrel system, the strongest action to date.

The light yet durable frame employs modern thermoplastic

technology through the use of technopolymer reinforced

fiberglass.

Modular structure, ergonomics and interchangeability of parts

make the Px4 Storm the ideal firearm for law-enforcement use,

as well as personal defense.

SAFETY FEATURES

WARNING: Each version of the Beretta Px4 Storm pistol offers

different features. Carefully read the following paragraph that

describes the specific characteristic of your Px4 Storm model.

They provide important safety information.

NOTICE: The numbers in the figures refer to the photos on pages

53 and 54.

Px4 Storm F (Fig. 1-2): Double/single action. Ambidextrous

manual safety on the slide with hammer decocking function,

automatic firing pin block safety.

Px4 Storm G (Fig. 3): Double/single action. Ambidextrous

manual lever on the slide with hammer decocking function with

the return of the lever to the firing position, automatic firing pin

block safety.

Px4 Storm D (Fig. 4): Double action only. Without manual safety-

hammer decocking. The spurless hammer, after each shot,

returns to the decocked position. Automatic firing pin block

safety.

Manual safety/hammer decocking lever (model F only)

(Fig. 1-2/A). The Beretta Px4 Storm pistols in F version are

equipped with an ambidextrous safety lever positioned on the

slide that disconnects the linkage between the trigger and the

sear, allowing to decock the hammer (if cocked or if positioned

on the half-cock position) with maximum safety, thanks to the

rotation of the rear part of the firing pin. The safety may be

engaged also with the hammer decocked and with slide open.

Hammer decocking lever on the slide (model G only) (Fig. 3). In

G configuration, the lever only decocks the hammer (the hammer

decocking lever, after operation, automatically returns to the

firing position).

Automatic firing pin block safety (Fig. 1/B). The Beretta Px4

Storm pistols have a blocking device that prevents forward

movement of the firing pin unless the trigger is completely

pulled.

Slide catch (slide stop) (Fig. 1/C). The slide catch is a lever

that holds the slide open and rearward after the last round is

fired. This allows the user to immediately determine that the

pistol does not have a round in the chamber or in the magazine.

External hammer (models F and G) (Fig. 1-2/D). The external

hammer (hammer spur) allows to immediately check if the

hammer is cocked, on the half-cock notch, or decocked. The

hammer in D configuration is spurless.

Half-cock notch (on hammer) (models F and G) (Fig. 7). The

hammer in F and G configurations has a half-cock notch that will

catch on the sear, before striking the firing pin, should the

hammer be released inadvertently by violently striking or

dropping the pistol. In D configuration, double action only

version, the hammer is spurless.

OPERATIONAL FEATURES

NOTICE: The numbers in the figures refer to the photos on pages

53 and 54.

Semiautomatic firing. Px4 Storm Beretta pistols will

automatically reload after each round is fired, as long as there

are cartridges in the magazine.

Rotating barrel (Fig. 1-2/E). The Px4 Storm pistol uses a

durable rotating barrel locking system. The locking lugs increase

accuracy when firing. Reduced friction areas between the barrel,

slide and central block, guarantee smoothness of operation and

great reliability in all conditions. In addition, the enlarged outer

barrel muzzle diameter ensures a precise and constant barrel-to-

slide coupling enhancing the accuracy of the pistol.

Low barrel axis position. Thanks to the design of the direct

barrel-slide locking system, the low barrel axis reduces felt recoil

and minimizes muzzle rise.

Single/double action (models F and G). The F and G versions

fire double action on the first round (the pull on the trigger in the

double action mode will first cock the hammer completely and

then release it to strike the firing pin) and single action on the

following rounds (as the hammer stays in the cocked position

after the first round). The first round can be fired also in single

action mode if the hammer is manually cocked prior to pulling the

trigger. The short and light single action trigger pull allows for

faster, more accurate discharge of subsequent rounds. The long

and heavy double action trigger pull is considered a safety

feature because it also helps reduce the likelihood of

unintentional discharge.

The hammer has three different positions:

Decocked hammer

(Fig. 5-6): The hammer is in the fully lowered

position. The pull on the trigger in the double action mode will

first cock the hammer completely and then release it to strike

the firing pin (double action).

Hammer in the half-cocked position (Fig. 7): By pulling the

hammer rearward for a few millimeters its half-cock notch will be

caught on the sear. You will feel and hear the hammer “click” into

the half-cocked position. The pull on the trigger in the double

action mode will first cock the hammer completely and then

release it to strike the firing pin (double action).

Cocked hammer

(Fig. 8): By pulling the hammer rearward

completely you will feel and hear the hammer (click) into the full-

cocked position. The hammer is now in the firing position. The

pull on the trigger will release the hammer immediately to strike

the firing pin (single action).

Double action only (model D). The pull on the trigger will first

cock the hammer completely and then release it to strike the

firing pin in the same motion. On model D (double action only)

the hammer follows the slide rearward and forward to come to

rest every time in the decocked position. The long and heavy

double action trigger pull is considered a safety feature because

it also helps reduce the likelihood of unintentional discharge.

High capacity magazine (Fig. 1/G). The Beretta Px4 Storm

pistols have an easily removable, high capacity staggered

magazine, that allows rapid reloading and extended use of the

firearm in special operating situations:

The type and capacity of magazine for the Beretta Px4 Storm

pistols is as follows:

Px4 Storm cal. 9mmx19 - staggered magazine with 17 rounds*

Px4 Storm cal. 9mmx21 IMI - staggered magazine with 15 rounds

Px4 Storm cal. .40 S&W - staggered magazine with 14 rounds*

*For some markets and in compliance to local legal restrictions,

extended magazine bottoms can be applied to increase the

magazine capacity: to 20 rounds for caliber 9mmx19; to 17

rounds for caliber .40 S&W.

CAUTION: Consult local authorities for magazine capacity

restrictions that may apply in your locale.

WARNING: In order to permit the use of the pistol in emergency

situations, even in the case of involuntary dropping or loss of the

magazine, these models are NOT provided with a magazine

disconnect safety. They are therefore capable of firing, when a

round is chambered, even if the magazine has not been inserted

or if it has been removed or if it has been dislodged from its

seat.

Skeletonized hammer (models F and G) (Fig. 1-2/D). The

distinctive hammer is significantly faster and lighter.

Interchangeable, luminescent Superluminova

sights (Fig. 1/H).

The high definition 3-dot sight system is coated in

Superluminova

, a special photosensitive material. Short

exposure to any kind of light, is enough to ensure long lasting

luminescence of up to 30 minutes. Rear and front sights can be

removed for replacement with other types of sights.

Simple field stripping, cleaning and re-assembly (Fig. 1-2/I).

The pistol is designed for extremely quick and simple field

stripping and to avoid casual or involuntary disassembly. Re-

assembly is easy and accidental misassembly of parts is

prevented by the distinctive design.

ERGONOMIC, MODULAR

FEATURES

NOTICE: The numbers in the figures refer to the photos on pages

53 and 54.

Technopolymer frame (Fig. 1/C). By using corrosion-resistant

technopolymer reinforced fiberglass, Beretta has developed a

light and technically advanced pistol with an extremely modern,

ergonomic line. The rounded, snag free surfaces of the pistol

ensure trouble-free insertion and holster extraction. The

rounded trigger guard ensures, correct hand firing position

The pistol comes with a standard Picatinny rail (MIL STD 1913)

under the barrel (Fig. 1-2/M) for convenient mounting of a laser

device, flashlight or other type of accessory.

Ergonomic and modular grip (Fig. 1-2/N). The ergonomic frame

features an optimal grip angle for automatic acquisition of the

line of sight. The rear upper part of the grip is curved and

recessed to snugly fit and protect the shooter’s hand.

Both the front and the rear of the grip feature a comfortable

checkered surface which, helps prevent slippage when held.

Thanks to a newly patented modular system, the pistol adapts to

different hand sizes with interchangeable back-straps of

different thickness and configuration for individualized

performance. In addition to the standard back-strap (medium),

the grips are available with a slim back-strap for small hands and

an oversized one for large hands.

Ambidextrous and interchangeable manual safety lever

(Fig. 1-2/A). The manual safety/hammer decocking lever (model

F) and the hammer decocking lever (model G) is positioned on

both sides of the slide for easy access by all shooters. The

model G decocking lever can be replaced with a low profile

(stealth) configuration to further reduce the overall dimensions

of the slide.

Reversible and interchangeable magazine release button (Fig.

1-2/O). The newly designed magazine release button can be

mounted on either side depending on shooter preference. The

standard button (small) can be easily replaced by either the

Large or Combat (extended size) button.

Interchangeable slide catch (Fig. 1/C). The slide catch may be

replaced with the low profile configuration (slim type).

Newly designed slide (Fig. 1/P). The sides of the slide are

smooth and offer snag-proof insertion and removal of the pistol

from its holster. The front and rear serrations on the slide

facilitate slide operation and safety control in moist conditions.

Removable and interchangeable hammer unit mechanism. The

hammer mechanism of the Px4 Storm pistol has been designed

as an independent group that can be extracted from the frame

without the use of special tools. Removal of the hammer unit

mechanism allows an easy access to the firing mechanism for

cleaning and special maintenance purposes. When necessary,

the hammer mechanism can even be removed in the field by

qualified personnel.

WARNING: This operation must be carried out by a competent

gunsmith.

WARNING: Do not attempt to alter the internal parts of your

pistol’s firing mechanism. Altering internal parts can cause

unsafe conditions.

WARNING: Altering the internal parts of your pistol’s firing

mechanism voids the manufacturer’s warranty.

SPECIFICATIONS AND

TECHNICAL DATA

Model Px4 Storm

Configuration F, G, D

Caliber 9mmx19 9mmx21 IMI .40 S&W

(Parabellum

or Luger)

Magazine Capacity

(rounds)* 17 15 14

Rifling Pitch 9.84 in./250 mm 9.84 in./250 mm 15.75 in./400 mm

Rifling R.H., 6 grooves.

General Operation Semiautomatic, short recoil of barrel.

Locking System Locked-breech, with rotating barrel.

Sights Front sight and rear sight on the slide. Removable.

Frame Reinforced fiberglass technopolymer.

Slide Steel, sandblasted, phosphatized and Bruniton coated.

Barrel Steel, sandblasted and blued. Internally chromium-plated.

Model Px4 Storm

Configuration FGD

Action Single/double Single/double Double only

Hammer External External Spurless

Safety Manual with Lever with Without manual

hammer hammer safety.

decocking decocking Automatic firing

function. function only. pin block.

Automatic firing Automatic firing

pin block. pin block.

Overall Length 7.55 in. / 192 mm

Barrel Length 4.02 in. / 102 mm

Overall Width 1.42 in. / 36 mm

Grip Width 1.18 in. / 30 mm

Overall Height 5.51 in. / 140 mm

Sight Radius 5.75 in. / 146 mm

Weight unloaded with

empty magazine (approx.) 27.69 oz. / 785 g.

* Consult local authorities for magazine capacity restrictions that may apply in your locale.

La pagina sta caricando ...

Beretta Px4 Storm Full Size Manuale utente

Marca: Beretta

Modello: Px4 Storm Full Size

Tipo: Manuale utente

Scarica il pdf

rapporto

in altre lingue

English: Beretta Px4 Storm Full Size User manual

Beretta Px4 Storm Full Size Manuale utente

Beretta Px4 Storm Full Size Manuale utente

in altre lingue

Documenti correlati

Altri documenti