VIPA smartPanel TP 107-SM Manuale del proprietario

TP-smart | H71-71A41-0 | Manual

HB160 | TP-smart | H71-71A41-0 | en | 23-10

HMI

smartPanel - TP307-SM

YASKAWA Europe GmbH

Philipp-Reis-Str. 6

65795 Hattersheim

Germany

Tel.: +49 6196 569-300

Fax: +49 6196 569-398

Email: [email protected]

Internet: www.yaskawa.eu.com

Table of contents

1 General.................................................................................................................... 4

1.2 About this manual............................................................................................. 5

1.3 Safety information............................................................................................. 6

2 Hardware description............................................................................................. 7

2.1 Safety information for users.............................................................................. 7

2.2 Properties......................................................................................................... 8

2.3 Structure........................................................................................................... 9

2.3.1 Overview........................................................................................................ 9

2.3.2 Interfaces..................................................................................................... 10

2.3.3 Memory management.................................................................................. 11

2.4 Dimensions..................................................................................................... 12

2.5 General data................................................................................................... 13

2.6 Use in difficult operating conditions................................................................ 14

2.7 Technical data................................................................................................. 15

3 Deployment........................................................................................................... 18

3.1 Installation...................................................................................................... 18

3.2 Commissioning............................................................................................... 19

3.2.1 Firmware update.......................................................................................... 20

3.2.2 Startup-Manager.......................................................................................... 22

3.3 Connection to a PLC system.......................................................................... 25

3.4 Operating system Windows Embedded Compact 7....................................... 26

3.4.1 General........................................................................................................ 26

3.4.2 Structure...................................................................................................... 27

3.5 Integrated server............................................................................................ 30

3.5.1 General........................................................................................................ 30

3.5.2 ftp server...................................................................................................... 30

3.5.3 Telnet server................................................................................................ 31

3.5.4 VNC server.................................................................................................. 33

3.5.5 Web server.................................................................................................. 34

3.6 Access to the network resources.................................................................... 35

4 Industrial Security and Installation guidelines.................................................. 37

4.1 Industrial security in information technology................................................... 37

4.1.1 Protection of hardware and applications..................................................... 38

4.1.2 Protection of PC-based software................................................................. 39

4.2 Installation guidelines..................................................................................... 39

4.2.1 Basic rules for the EMC-equitable assembly of installations....................... 39

4.2.2 EMC-equitable assembly............................................................................. 43

4.2.3 EMC-equitable cabling................................................................................ 44

4.2.4 Special precautions providing high noise immunity..................................... 47

4.2.5 Checklist for the EMC-compliant installation of controllers.......................... 48

Appendix............................................................................................................... 49

A History of changes............................................................................................ 51

HMI Table of contents

HB160 | TP-smart | H71-71A41-0 | en | 23-10 3

1 General

This document contains proprietary information of Yaskawa and is not to be disclosed or

used except in accordance with applicable agreements.

This material is protected by copyright laws. It may not be reproduced, distributed, or

altered in any fashion by any entity (either internal or external to Yaskawa) except in

accordance with applicable agreements, contracts or licensing, without the express

written consent of Yaskawa and the business management owner of the material.

For permission to reproduce or distribute, please contact: YASKAWA Europe GmbH,

European Headquarters, Philipp-Reis-Str. 6, 65795 Hattersheim, Germany

Tel.: +49 6196 569 300

Fax.: +49 6196 569 398

Email: [email protected]

Internet: www.yaskawa.eu.com

Hereby, YASKAWA Europe GmbH declares that the products and systems are in compli-

ance with the essential requirements and other relevant provisions. Conformity is indi-

cated by the CE marking affixed to the product.

For more information regarding CE marking and Declaration of Conformity (DoC), please

contact your local representative of YASKAWA Europe GmbH.

SPEED7 is a registered trademark of YASKAWA Europe GmbH.

All Microsoft Windows, Office and Server products mentioned are registered trademarks

of Microsoft Inc., USA.

Portable Document Format (PDF) is a registered trademark of Adobe Systems, Inc.

All other trademarks, logos and service or product marks specified herein are owned by

their respective companies.

Every effort has been made to ensure that the information contained in this document

was complete and accurate at the time of publishing. We cannot guarantee that the infor-

mation is free of errors, and we reserve the right to change the information at any time.

There is no obligation to inform the customer about any changes. The customer is

requested to actively keep his documents up to date. The customer is always responsible

for the deployment of the products with the associated documentation, taking into

account the applicable directives and standards.

This documentation describes all hardware and software units and functions known

today. It is possible that units are described that do not exist at the customer. The exact

scope of delivery is described in the respective purchase contract.

Contact your local representative of YASKAWA Europe GmbH if you have errors or ques-

tions regarding the content of this document. You can reach YASKAWA Europe GmbH via

the following contact:

Email: [email protected]

EC conformity declaration

Conformity Information

Trademarks

General terms of use

Document support

HMI

General

HB160 | TP-smart | H71-71A41-0 | en | 23-10 4

Contact your local representative of YASKAWA Europe GmbH if you encounter problems

or have questions regarding the product. If such a location is not available, you can reach

the Yaskawa customer service via the following contact:

YASKAWA Europe GmbH,

European Headquarters, Philipp-Reis-Str. 6, 65795 Hattersheim, Germany

Tel.: +49 6196 569 500 (hotline)

Email: [email protected]

1.2 About this manual

This manual describes the smartPanel H71-71A410-0.

nIt contains a description of the structure, project engineering and deployment.

nThe manual is written for users with basic knowledge of automation technology.

nThe manual consists of chapters. Each chapter describes a completed topic.

nThe following guides are available in the manual:

– An overall table of contents at the beginning of the manual.

– References with pages numbers.

Validity of the documentation

Product Order no. as of version:

TP 307-SM H71-71A410-0 HW: 01 FW: V1.0.4

Important passages in the text are highlighted by following icons and headings:

DANGER!

Immediate or likely danger. Personal injury is possible.

CAUTION!

Damages to property is likely if these warnings are not heeded.

Supplementary information and useful tips.

Technical support

Objective and contents

Icons Headings

HMI General

About this manual

HB160 | TP-smart | H71-71A41-0 | en | 23-10 5

1.3 Safety information

The system is constructed and produced for:

ncommunication and process control

ngeneral control and automation tasks

nindustrial applications

noperation within the environmental conditions specified in the technical data

ninstallation into a cubicle

DANGER!

This device is not certified for applications in

– in explosive environments (EX-zone)

The manual must be available to all personnel in the

nproject design department

ninstallation department

ncommissioning

noperation

CAUTION!

The following conditions must be met before using or commis-

sioning the components described in this manual:

– Hardware modifications to the process control system should only be

carried out when the system has been disconnected from power!

– Installation and hardware modifications only by properly trained per-

sonnel.

– The national rules and regulations of the respective country must be

satisfied (installation, safety, EMC ...)

National rules and regulations apply to the disposal of the unit!

Applications conforming

with specifications

Documentation

Disposal

HMI

General

Safety information

HB160 | TP-smart | H71-71A41-0 | en | 23-10 6

2 Hardware description

2.1 Safety information for users

The modules make use of highly integrated components in MOS-Technology. These com-

ponents are extremely sensitive to over-voltages that can occur during electrostatic dis-

charges. The following symbol is attached to modules that can be destroyed by electro-

static discharges.

The Symbol is located on the module, the module rack or on packing material and it indi-

cates the presence of electrostatic sensitive equipment. It is possible that electrostatic

sensitive equipment is destroyed by energies and voltages that are far less than the

human threshold of perception. These voltages can occur where persons do not dis-

charge themselves before handling electrostatic sensitive modules and they can damage

components thereby, causing the module to become inoperable or unusable. Modules

that have been damaged by electrostatic discharges can fail after a temperature change,

mechanical shock or changes in the electrical load. Only the consequent implementation

of protection devices and meticulous attention to the applicable rules and regulations for

handling the respective equipment can prevent failures of electrostatic sensitive modules.

Modules must be shipped in the original packing material.

When you are conducting measurements on electrostatic sensitive modules you should

take the following precautions:

nFloating instruments must be discharged before use.

nInstruments must be grounded.

Modifying electrostatic sensitive modules you should only use soldering irons with

grounded tips.

CAUTION!

Personnel and instruments should be grounded when working on electro-

static sensitive modules.

Handling of electrostatic

sensitive modules

Shipping of modules

Measurements and altera-

tions on electrostatic sen-

sitive modules

HMI Hardware description

Safety information for users

HB160 | TP-smart | H71-71A41-0 | en | 23-10 7

2.2 Properties

The smartPanel allows you to visualize and alter operating states and recent process

values of a connected PLC. The smartPanel is a compact and modular embedded PC

based on WindowsÒ EC 7. Besides the extensive WindowsÒ CE functions the smartPanel

offers varied communication possibilities. Here the smartPanel can simply be configured,

controlled and remoted. By including a selectable HMI/SCADA runtime the smartPanel is

particularly suitable for monitoring and controlling of process cycles.

nWindowsÒ Embedded Compact 7

nMovicon 11 CE Standard (4096 I/O Bytes)

nProcessor ARM Cortex A8 1GHz

nFlash memory 4GB, RAM 512MB DDR

nRS232/RS422/RS485, USB-A and Ethernet interface

nRobust plastic case

nDisplay resolution 480 x 800 / 800 x 480, 64K colors

nClock back up (Goldcap)

nResistive analog touch screen

nEasy mounting via mounting clips

nProtection class IP66, Type 2 and 4X (Front) / IP20 (Back)

Order data

Type Order number Description

TP 307-SM H71-71A410-0 7'' TFT color, RS232/RS422/RS485, USB-A, Ethernet RJ45

General

HMI

Hardware description

Properties

HB160 | TP-smart | H71-71A41-0 | en | 23-10 8

2.3 Structure

2.3.1 Overview

1 Interfaces

2 Display with touch sensitive area (Touch-Screen)

1 USB-A interface USB 2.0

2 RJ45 jack for Ethernet communication LAN

3 RS232/RS422/RS485 interface COM

4 Slot for DC 24V voltage supply

Front view

Bottom view

HMI Hardware description

Structure > Overview

HB160 | TP-smart | H71-71A41-0 | en | 23-10 9

2.3.2 Interfaces

Using the "Host"-USB-A interface USB mouse, keyboard, stick or USB hard discs can be

connected.

The RJ45 jack provides the interface to the twisted pair cable, required for Ethernet. The

Ethernet interface has got two LEDs for status display.

LEDs

green yellow

Description

on off no link

blinks on 100Mbit/s link

blinks off 10Mbit/s link

9 pin SubD plug

nInterface is compatible to the COM interface of a PC

nLogical signals as voltage levels

nPoint-to-point links with serial full-duplex transfer in two-wire technology up to 15m

distance

nData transfer rate up to 115.2kbit/s

"Host"-USB-A

Ethernet connection

RS232 interface

HMI

Hardware description

Structure > Interfaces

HB160 | TP-smart | H71-71A41-0 | en | 23-10 10

9 pin SubD jack

nLogical states represented by voltage differences between the 4 cores

nSerial bus connection in 4-wire technology using full duplex mode

nData communications up to a max. distance of 500m

nData communication rate up to 115.2kBaud

nSerial bus connection in 2-wire technology using half duplex mode

The smartPanel has got an integrated power supply. The power supply has to be pro-

vided with DC 24V (18 ... 32 VDC). For this you find an according DC 24V slot at the

bottom

Ä

‘Connect power supply’ page 18.

2.3.3 Memory management

The following memory systems are available for the smartPanel:

n512MB work memory (RAM)

n4GB user memory (Flash)

nUSB storage media using "Host"-USB-A interface

Every Touch Panel has a work memory with a size of 512MB. The work memory is not

buffered and is deleted after shut down. Please regard that also registry entries are

stored in the work memory that are set back to default settings after the next re-boot.

As internal permanent storage medium every smartPanel has a flash disk with a size of

4GB. 2GB of this is available to the user. After the start of WindowsÒ this memory is listed

as Flashdisk under My Device.

RS422/485 interface

Power supply

Overview

Work memory (RAM)

User memory (Flash)

HMI Hardware description

Structure > Memory management

HB160 | TP-smart | H71-71A41-0 | en | 23-10 11

The connection of USB sticks and USB drives by use of the "Host"-USB-A interface is

supported by the smartPanel. After connection the storage media is listed as USB Hard

Disk under My Device.

2.4 Dimensions

Front panel (L x H) 187 x 147 mm

Depth (D+T) 29 + 5 mm

Installation cutting (A x B) 176 x 136 mm

The degrees of protection are only guaranteed when the following is

observed:

–Material thickness at the mounting cut-out: 1.5 ... 6mm

–The deviation from the plane for the panel cut-out is

£

0.5mm. This

condition must be fulfilled for the mounted HMI device.

–Permissible surface roughness in the area of the seal:

£

120µm (fric-

tion coefficient 120)

USB storage media

(USB 2.0)

Installation dimensions

HMI

Hardware description

Dimensions

HB160 | TP-smart | H71-71A41-0 | en | 23-10 12

2.5 General data

Conformity and approval

Conformity

CE 2014/30/EU EMC directive

Approval

UL Refer to Technical data

others

RoHS 2011/65/EU Restriction of the use of certain hazardous substances in

electrical and electronic equipment

Protection of persons and device protection

Type of protection - Rear: IP20; Front: IP66, NEMA Type 2 and Type 4x

Electrical isolation

to the field bus - electrically isolated

to the process level - electrically isolated

Insulation resistance -

Insulation voltage to reference earth

Inputs / outputs - AC / DC 50V, test voltage AC 500V

Protective measures - against short circuit

Environmental conditions to EN 61131-2

Climatic

Storage / transport EN 60068-2-14 -20…+70°C

Operation

Horizontal installation EN 61131-2 0…+40°C

Vertical installation EN 61131-2 0…+50°C

Air humidity EN 60068-2-30 RH1 (without condensation, rel. humidity 5…85%)

Pollution EN 61131-2 Degree of pollution 2

Mechanical

Oscillation EN 60068-2-6 1g, 9Hz ... 150Hz

Shock EN 60068-2-27 15g, 11ms

Mounting conditions

Mounting place - In the control cabinet

Mounting position - Horizontal and vertical

HMI Hardware description

General data

HB160 | TP-smart | H71-71A41-0 | en | 23-10 13

EMC Standard Comment

Emitted interference EN 61000-6-4 Class A (Industrial area)

Noise immunity

zone B

EN 61000-6-2 Industrial area

EN 61000-4-2 ESD

8kV at air discharge (degree of severity 3),

4kV at contact discharge (degree of severity 2)

EN 61000-4-3 HF field immunity (casing)

80MHz … 1000MHz, 10V/m, 80% AM (1kHz)

1.4GHz ... 2.0GHz, 3V/m, 80% AM (1kHz)

2GHz ... 2.7GHz, 1V/m, 80% AM (1kHz)

EN 61000-4-6 HF conducted

150kHz … 80MHz, 10V, 80% AM (1kHz)

EN 61000-4-4 Burst, degree of severity 3

EN 61000-4-5 Surge, degree of severity 31

1) Due to the high-energetic single pulses with Surge an appropriate external protective circuit with lightning protection elements like conductors for lightning and overvoltage is

necessary.

2.6 Use in difficult operating conditions

Without additional protective measures, the products must not be used in

locations with difficult operating conditions; e.g. due to:

–dust generation

–chemically active substances (corrosive vapors or gases)

–strong electric or magnetic fields

HMI

Hardware description

Use in difficult operating conditions

HB160 | TP-smart | H71-71A41-0 | en | 23-10 14

2.7 Technical data

Order no. H71-71A41-0

Type smartPanel TP307-SM

Display

Display size (diagonal) 7 "

Display size (width) 155 mm

Display size (height) 88 mm

Resolution 480 x 800 / 800 x 480

Aspect ratio 16:9

Type of display TFT color (64K colors)

MTBF Backlights (25°C) 20000 h

System properties

Processor Cortex-A8 1000 MHz

Operating system Windows embedded Compact 7

User software Movicon 11 CE Standard

Work memory 512 MB

User memory 4 GB

Available memory (user data) 2 GB

SD/MMC Slot -

CF Card Slot Typ II -

CFast Slot -

Time

Real-time clock buffered ü

Clock buffered period (min.) 2 w

Type of buffering Goldcap

Load time for 50% buffering period 5 h

Load time for 100% buffering period 10 h

Accuracy (max. deviation per day) 8 s

Operating controls

Touchscreen resistive

Touch function Single Touch

Keyboard external via USB

Mouse external via USB

Interfaces

MPI, PROFIBUS-DP -

MPI, PROFIBUS-DP connector -

Serial, COM1 RS232 / RS422 / RS485

HMI Hardware description

Technical data

HB160 | TP-smart | H71-71A41-0 | en | 23-10 15

Order no. H71-71A41-0

COM1 connector Sub-D, 9-pin, male

Serial, COM2 -

COM2 connector -

Number of USB-A interfaces 1

USB-A connector USB-A (host)

Number of USB-B interfaces -

USB-B connector -

Number of ethernet interfaces 1

Ethernet Ethernet 10/100 MBit

Ethernet connector RJ45

Integrated ethernet switch -

Video connectors -

Audio connections -

Technical data power supply

Power supply (rated value) DC 24 V

Power supply (permitted range) 18 - 32 VDC

Reverse polarity protection ü

Current consumption (no-load operation) 0.1 A

Current consumption (rated value) 0.3 A

Inrush current 38 A

I²t 0.33 A²s

Power loss 7 W

Status information, alarms, diagnostics

Supply voltage display none

Mechanical data

Housing / Protection class

Material PC + ABS

Mounting mounting clips

Protection class IP front side IP 66

Protection class IP back side IP 20

Protection class NEMA front side Type 2, 4X

Protection class NEMA back side -

Dimensions

Front panel 187 mm x 147 mm x 5 mm

Rear panel 172 mm x 133 mm x 29 mm

Installation cut-out

HMI

Hardware description

Technical data

HB160 | TP-smart | H71-71A41-0 | en | 23-10 16

Order no. H71-71A41-0

Width 176 mm

Height 136 mm

Minimum 1.5 mm

Maximum front panel thickness 6 mm

Net weight 500 g

Weight including accessories 631 g

Gross weight 900 g

Environmental conditions

Operating temperature 0 °C to 50 °C

Storage temperature -20 °C to 70 °C

Certifications

UL certification yes

KC certification -

HMI Hardware description

Technical data

HB160 | TP-smart | H71-71A41-0 | en | 23-10 17

3 Deployment

3.1 Installation

The smartPanel is suitable for the installation in operating tables and control cabinet

fronts. The installation happens via the backside. The smartPanel is provided with a fixing

technique that allows an easy connection with a crosstip screwdriver. A fast and easy

device change is possible.

For the installation into a operating tableau and control cabinet fronts, the smartPanel

requires the following front plate cutting:

smartPanel A x B in mm

H71-71A410-0 176 x 136 mm

To fix the smartPanel mounting clips are included. For the installation a small crosstip

screwdriver is required.

1. Push the smartPanel [3] from the front side into the front panel cutting [1] until it

touches the panel with the seal [2].

2. Put the mounting clips [4] on all four sides of the smartPanel into the openings. The

screws should point in the direction of the front panel.

3. Screw the screws from the other side with the crosstip screwdriver [5].

nFor the cabling of the DC 24V power supply (18 ... 32 VDC) a black plug is included.

The connector is a plug with screw contacts. The associated label is located on the

back of the smartPanel.

nThe smartPanel must always be grounded to earth. Grounding helps limit the effects

of noise due to electromagnetic interference.

nUse the power supply terminal marked with for grounding.

nThe power supply circuit may be floating or grounded. In the latter case, connect to

the ground the power supply as shown in figure with a dashed line.

nWhen using the floating power scheme, note that the smartPanel internally connects

the power to the ground with a 1MΩ resistor in parallel with a 4.7nF capacitor.

Overview

Installation cutting

Installation

Connect power supply

HMI

Deployment

Installation

HB160 | TP-smart | H71-71A41-0 | en | 23-10 18

3.2 Commissioning

CAUTION!

– Before commissioning the device must be brought to room tempera-

ture.

– At condensation the device must be absolutely dry before connected

to power.

– To avoid overheat during operation the device must not be laid open

to direct sun light.

– After opening the control cabinet or desk, there are parts with pos-

sible dangerous voltage available.

– For all signal connections only screened cables are permitted.

– Signal cables must not be let within the same cable shaft as high

voltage cables.

CAUTION!

When changing the ‘Regional Settings’ , please note that only English

and German are supported, other languages can lead to a system crash.

HMI Deployment

Commissioning

HB160 | TP-smart | H71-71A41-0 | en | 23-10 19

3.2.1 Firmware update

To execute the firmware update an empty USB stick (at least 1GB) in FAT32 format is

necessary.

The latest firmware versions can be found in the Download Center at

www.yaskawa.eu.com.

CAUTION!

When installing a new firmware you have to be extremely careful. Under

certain circumstances you can destroy the smartPanel, for example if the

voltage supply is interrupted during transfer or if the firmware file is defec-

tive. In this case, please call our hotline!

Please regard that the version of the update firmware has to be different

from the existing firmware otherwise no update is executed.

1. Go to Download Center at www.yaskawa.eu.com.

2. Under Firmware H71-71A410-0 download the ZIP file for the update process and

unzip the content in the root directory of the USB stick.

1. Connect the smartPanel to the power supply.

ðThe smartPanel starts with the Startup-Manager.

2. There is a button on the initial screen with a counter, which counts backwards. If

you click on [Main] within this time, you will get to the selection menu.

ðYou are now on the WindowsÒ screen.

3. Open "System Tools" via ‘Start è Programs è Tools’.

Requirement

Current firmware on

www.yaskawa.eu.com

Load firmware on USB

stick

Prepare the smartPanel

HMI

Deployment

Commissioning > Firmware update

HB160 | TP-smart | H71-71A41-0 | en | 23-10 20

La pagina sta caricando ...

VIPA smartPanel TP 107-SM Manuale del proprietario

VIPA smartPanel TP 107-SM Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti